本文整理汇总了C++中MemoryUsage函数的典型用法代码示例。如果您正苦于以下问题:C++ MemoryUsage函数的具体用法?C++ MemoryUsage怎么用?C++ MemoryUsage使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了MemoryUsage函数的18个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: LOG
nsresult
CacheFileMetadata::SetHash(uint32_t aIndex, CacheHash::Hash16_t aHash)
{
LOG(("CacheFileMetadata::SetHash() [this=%p, idx=%d, hash=%x]",
this, aIndex, aHash));
MarkDirty();
MOZ_ASSERT(aIndex <= mHashCount);
if (aIndex > mHashCount) {
return NS_ERROR_INVALID_ARG;
} else if (aIndex == mHashCount) {
if ((aIndex + 1) * sizeof(CacheHash::Hash16_t) > mHashArraySize) {
// reallocate hash array buffer
if (mHashArraySize == 0)
mHashArraySize = 32 * sizeof(CacheHash::Hash16_t);
else
mHashArraySize *= 2;
mHashArray = static_cast<CacheHash::Hash16_t *>(
moz_xrealloc(mHashArray, mHashArraySize));
}
mHashCount++;
}
NetworkEndian::writeUint16(&mHashArray[aIndex], aHash);
DoMemoryReport(MemoryUsage());
return NS_OK;
}
开发者ID:franzks,项目名称:gecko-dev,代码行数:32,代码来源:CacheFileMetadata.cpp
示例2: sizeof
char* Arena::AllocateNewBlock(size_t block_bytes) {
char* result = new char[block_bytes];
blocks_.push_back(result);
memory_usage_.NoBarrier_Store(
reinterpret_cast<void*>(MemoryUsage() + block_bytes + sizeof(char*)));
return result;
}
开发者ID:yanxi10,项目名称:leveldblib,代码行数:7,代码来源:arena.cpp
示例3: used_in_bytes
MemoryUsage CodeHeapPool::get_memory_usage() {
size_t used = used_in_bytes();
size_t committed = _codeHeap->capacity();
size_t maxSize = (available_for_allocation() ? max_size() : 0);
return MemoryUsage(initial_size(), used, committed, maxSize);
}
开发者ID:guanxiaohua,项目名称:TransGC,代码行数:7,代码来源:memoryPool.cpp
示例4: max_size
MemoryUsage EdenMutableSpacePool::get_memory_usage() {
size_t maxSize = (available_for_allocation() ? max_size() : 0);
size_t used = used_in_bytes();
size_t committed = _space->capacity_in_bytes();
return MemoryUsage(initial_size(), used, committed, maxSize);
}
开发者ID:tetratec,项目名称:Runescape-Launcher,代码行数:7,代码来源:psMemoryPool.cpp
示例5: max_size
MemoryUsage SurvivorContiguousSpacePool::get_memory_usage() {
size_t maxSize = (available_for_allocation() ? max_size() : 0);
size_t used = used_in_bytes();
size_t committed = committed_in_bytes();
return MemoryUsage(initial_size(), used, committed, maxSize);
}
开发者ID:guanxiaohua,项目名称:TransGC,代码行数:7,代码来源:memoryPool.cpp
示例6: max_size
MemoryUsage PSGenerationPool::get_memory_usage() {
size_t maxSize = (available_for_allocation() ? max_size() : 0);
size_t used = used_in_bytes();
size_t committed = _old_gen->capacity_in_bytes();
return MemoryUsage(initial_size(), used, committed, maxSize);
}
开发者ID:campolake,项目名称:openjdk9,代码行数:7,代码来源:psMemoryPool.cpp
示例7: initial_size
MemoryUsage G1OldGenPool::get_memory_usage() {
size_t initial_sz = initial_size();
size_t max_sz = max_size();
size_t used = used_in_bytes();
size_t committed = _g1mm->old_space_committed();
return MemoryUsage(initial_sz, used, committed, max_sz);
}
开发者ID:4T-Shirt,项目名称:OpenJDK-Research,代码行数:8,代码来源:g1MemoryPool.cpp
示例8: DoMemoryReport
void
CacheFileMetadata::EnsureBuffer(uint32_t aSize)
{
if (mBufSize < aSize) {
mBufSize = aSize;
mBuf = static_cast<char *>(moz_xrealloc(mBuf, mBufSize));
}
DoMemoryReport(MemoryUsage());
}
开发者ID:franzks,项目名称:gecko-dev,代码行数:10,代码来源:CacheFileMetadata.cpp
示例9: get_memory_usage
void MemoryPool::record_peak_memory_usage() {
// Caller in JDK is responsible for synchronization -
// acquire the lock for this memory pool before calling VM
MemoryUsage usage = get_memory_usage();
size_t peak_used = get_max_value(usage.used(), _peak_usage.used());
size_t peak_committed = get_max_value(usage.committed(), _peak_usage.committed());
size_t peak_max_size = get_max_value(usage.max_size(), _peak_usage.max_size());
_peak_usage = MemoryUsage(initial_size(), peak_used, peak_committed, peak_max_size);
}
开发者ID:guanxiaohua,项目名称:TransGC,代码行数:10,代码来源:memoryPool.cpp
示例10: ieRefCount
ieImage::ieImage(ieWH wh_, iePixelFormat pf_)
: ieRefCount(),
wh(wh_),
pf(pf_),
at(ieAlphaType::None),
Frame()
{
#ifdef _DEBUG
nInstances++;
nMemoryUsage += MemoryUsage();
#endif
}
开发者ID:FMJ-Software,项目名称:ieCpp,代码行数:12,代码来源:ieImage.cpp
示例11: MemoryUsage
/**
* Testing function
* return true if there is no errors
* return false if there are and the descriptions in strerr
*/
bool TestGraph::TestAll()
{
char* unit;
float size = MemoryUsage();
if( size < 1024 )
unit = "KB";
else
{
size /= 1024;
unit = "MB";
}
printf("Graph used %.1f%s of RAM.\n", size, unit);
return true;
}
开发者ID:AIDman,项目名称:Kaldi,代码行数:19,代码来源:test_graph.cpp
示例12: MemoryUsage
MemoryUsage HeapRegionManager::get_auxiliary_data_memory_usage() const {
size_t used_sz =
_prev_bitmap_mapper->committed_size() +
_next_bitmap_mapper->committed_size() +
_bot_mapper->committed_size() +
_cardtable_mapper->committed_size() +
_card_counts_mapper->committed_size();
size_t committed_sz =
_prev_bitmap_mapper->reserved_size() +
_next_bitmap_mapper->reserved_size() +
_bot_mapper->reserved_size() +
_cardtable_mapper->reserved_size() +
_card_counts_mapper->reserved_size();
return MemoryUsage(0, used_sz, committed_sz, committed_sz);
}
开发者ID:campolake,项目名称:openjdk9,代码行数:17,代码来源:heapRegionManager.cpp
示例13: MemoryUsage
ieImage::~ieImage()
{
if (Frame.pimNext) {
Frame.pimNext->FrameParams().pimPrev = nullptr;
Frame.pimNext->Release();
}
if (Frame.pimPrev) {
Frame.pimPrev->FrameParams().pimNext = nullptr;
Frame.pimPrev->Release();
}
if (Frame.pimRest) {
Frame.pimRest->Release();
}
#ifdef _DEBUG
nInstances--;
nMemoryUsage -= MemoryUsage();
#endif
}
开发者ID:FMJ-Software,项目名称:ieCpp,代码行数:18,代码来源:ieImage.cpp
示例14: free
void
CacheFileMetadata::InitEmptyMetadata()
{
if (mBuf) {
free(mBuf);
mBuf = nullptr;
mBufSize = 0;
}
mOffset = 0;
mMetaHdr.mVersion = kCacheEntryVersion;
mMetaHdr.mFetchCount = 0;
mMetaHdr.mExpirationTime = nsICacheEntry::NO_EXPIRATION_TIME;
mMetaHdr.mKeySize = mKey.Length();
DoMemoryReport(MemoryUsage());
// We're creating a new entry. If there is any old data truncate it.
if (mHandle && mHandle->FileExists() && mHandle->FileSize()) {
CacheFileIOManager::TruncateSeekSetEOF(mHandle, 0, 0, nullptr);
}
}
开发者ID:logicoftekk,项目名称:cyberfox,代码行数:21,代码来源:CacheFileMetadata.cpp
示例15: DoMemoryReport
nsresult
CacheFileMetadata::EnsureBuffer(uint32_t aSize)
{
if (aSize > kMaxElementsSize) {
return NS_ERROR_FAILURE;
}
if (mBufSize < aSize) {
if (mAllocExactSize) {
// If this is not the only allocation, use power of two for following
// allocations.
mAllocExactSize = false;
} else {
// find smallest power of 2 greater than or equal to aSize
--aSize;
aSize |= aSize >> 1;
aSize |= aSize >> 2;
aSize |= aSize >> 4;
aSize |= aSize >> 8;
aSize |= aSize >> 16;
++aSize;
}
if (aSize < kInitialBufSize) {
aSize = kInitialBufSize;
}
char *newBuf = static_cast<char *>(realloc(mBuf, aSize));
if (!newBuf) {
return NS_ERROR_OUT_OF_MEMORY;
}
mBufSize = aSize;
mBuf = newBuf;
DoMemoryReport(MemoryUsage());
}
return NS_OK;
}
开发者ID:logicoftekk,项目名称:cyberfox,代码行数:39,代码来源:CacheFileMetadata.cpp
示例16: MemoryUsage
MemoryPool::MemoryPool(const char* name,
PoolType type,
size_t init_size,
size_t max_size,
bool support_usage_threshold,
bool support_gc_threshold) {
_name = name;
_initial_size = init_size;
_max_size = max_size;
_memory_pool_obj = NULL;
_available_for_allocation = true;
_num_managers = 0;
_type = type;
// initialize the max and init size of collection usage
_after_gc_usage = MemoryUsage(_initial_size, 0, 0, _max_size);
_usage_sensor = NULL;
_gc_usage_sensor = NULL;
// usage threshold supports both high and low threshold
_usage_threshold = new ThresholdSupport(support_usage_threshold, support_usage_threshold);
// gc usage threshold supports only high threshold
_gc_usage_threshold = new ThresholdSupport(support_gc_threshold, support_gc_threshold);
}
开发者ID:guanxiaohua,项目名称:TransGC,代码行数:24,代码来源:memoryPool.cpp
示例17: setTree
//.........这里部分代码省略.........
if(cIndex&2) myCenter[1] += myWidth/2;
else myCenter[1] -= myWidth/2;
if(cIndex&4) myCenter[2] += myWidth/2;
else myCenter[2] -= myWidth/2;
d++;
}
SplatOrientedPoint( temp , p , n , neighborKey );
}
pointWeightSum += pointWeight;
if ( this->_constrainValues )
{
int d = 0;
TreeOctNode* temp = &this->tree;
Point3D< Real > myCenter = Point3D< Real >( Real(0.5) , Real(0.5) , Real(0.5) );
Real myWidth = Real(1.0);
while( true )
{
int idx = temp->nodeData.pointIndex;
if( idx == -1 )
{
idx = static_cast<int>( this->_points.size() );
this->_points.push_back( PointData( p , Real(1.0) ) );
temp->nodeData.pointIndex = idx;
}
else
{
this->_points[idx].weight += Real(1.0);
this->_points[idx].position += p;
}
int cIndex = TreeOctNode::CornerIndex( myCenter , p );
if ( !temp->children )
break;
temp = &temp->children[cIndex];
myWidth /= 2;
if( cIndex&1 ) myCenter[0] += myWidth/2;
else myCenter[0] -= myWidth/2;
if( cIndex&2 ) myCenter[1] += myWidth/2;
else myCenter[1] -= myWidth/2;
if( cIndex&4 ) myCenter[2] += myWidth/2;
else myCenter[2] -= myWidth/2;
d++;
}
}
++cnt;
}
}
if( this->_boundaryType == 0 )
pointWeightSum *= Real(4.0);
constraintWeight *= static_cast<Real>(pointWeightSum);
constraintWeight /= static_cast<Real>(cnt);
MemoryUsage( );
if( this->_constrainValues )
{
for( TreeOctNode* node=this->tree.nextNode() ; node ; node=this->tree.nextNode(node) )
{
if( node->nodeData.pointIndex != -1 )
{
int idx = node->nodeData.pointIndex;
this->_points[idx].position /= this->_points[idx].weight;
int e = ( this->_boundaryType == 0 ? node->depth()-1 : node->depth() ) * adaptiveExponent - ( this->_boundaryType == 0 ? maxDepth-1 : maxDepth ) * (adaptiveExponent-1);
if ( e < 0 )
this->_points[idx].weight /= Real( 1<<(-e) );
else
this->_points[idx].weight *= Real( 1<< e );
this->_points[idx].weight *= Real( constraintWeight );
}
}
}
#if FORCE_NEUMANN_FIELD
if( this->_boundaryType == 1 )
{
for( TreeOctNode* node=this->tree.nextNode() ; node ; node=this->tree.nextNode( node ) )
{
int d , off[3];
node->depthAndOffset( d , off );
int res = 1<<d;
if( node->nodeData.normalIndex < 0 )
continue;
Point3D< Real >& normal = (*this->normals)[node->nodeData.normalIndex];
for( int d=0 ; d<3 ; d++ )
if ( off[d]==0 || off[d]==res-1 )
normal[d] = 0;
}
}
#endif // FORCE_NEUMANN_FIELD
MemoryUsage();
return cnt;
}
开发者ID:Aerochip7,项目名称:trunk,代码行数:101,代码来源:PoissonReconLib.cpp
示例18: LOG
nsresult
CacheFileMetadata::WriteMetadata(uint32_t aOffset,
CacheFileMetadataListener *aListener)
{
LOG(("CacheFileMetadata::WriteMetadata() [this=%p, offset=%d, listener=%p]",
this, aOffset, aListener));
MOZ_ASSERT(!mListener);
MOZ_ASSERT(!mWriteBuf);
nsresult rv;
mIsDirty = false;
mWriteBuf = static_cast<char *>(malloc(CalcMetadataSize(mElementsSize,
mHashCount)));
if (!mWriteBuf) {
return NS_ERROR_OUT_OF_MEMORY;
}
char *p = mWriteBuf + sizeof(uint32_t);
memcpy(p, mHashArray, mHashCount * sizeof(CacheHash::Hash16_t));
p += mHashCount * sizeof(CacheHash::Hash16_t);
mMetaHdr.WriteToBuf(p);
p += sizeof(CacheFileMetadataHeader);
memcpy(p, mKey.get(), mKey.Length());
p += mKey.Length();
*p = 0;
p++;
memcpy(p, mBuf, mElementsSize);
p += mElementsSize;
CacheHash::Hash32_t hash;
hash = CacheHash::Hash(mWriteBuf + sizeof(uint32_t),
p - mWriteBuf - sizeof(uint32_t));
NetworkEndian::writeUint32(mWriteBuf, hash);
NetworkEndian::writeUint32(p, aOffset);
p += sizeof(uint32_t);
char * writeBuffer = mWriteBuf;
if (aListener) {
mListener = aListener;
} else {
// We are not going to pass |this| as a callback so the buffer will be
// released by CacheFileIOManager. Just null out mWriteBuf here.
mWriteBuf = nullptr;
}
rv = CacheFileIOManager::Write(mHandle, aOffset, writeBuffer, p - writeBuffer,
true, true, aListener ? this : nullptr);
if (NS_FAILED(rv)) {
LOG(("CacheFileMetadata::WriteMetadata() - CacheFileIOManager::Write() "
"failed synchronously. [this=%p, rv=0x%08x]", this, rv));
mListener = nullptr;
if (mWriteBuf) {
free(mWriteBuf);
mWriteBuf = nullptr;
}
NS_ENSURE_SUCCESS(rv, rv);
}
DoMemoryReport(MemoryUsage());
return NS_OK;
}
开发者ID:logicoftekk,项目名称:cyberfox,代码行数:67,代码来源:CacheFileMetadata.cpp
注:本文中的MemoryUsage函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论