• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ MemAlloc函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MemAlloc函数的典型用法代码示例。如果您正苦于以下问题:C++ MemAlloc函数的具体用法?C++ MemAlloc怎么用?C++ MemAlloc使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MemAlloc函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GetWORD


//.........这里部分代码省略.........
        for(i = 0; i < instructionLength; i++) {
            // We can ignore the instructions, since we're doing vector
            // output.
            (void)GetBYTE();
        }

        BYTE  *flags = (BYTE *)AllocTemporary(totalPts*sizeof(BYTE));
        SWORD *x     = (SWORD *)AllocTemporary(totalPts*sizeof(SWORD));
        SWORD *y     = (SWORD *)AllocTemporary(totalPts*sizeof(SWORD));

        // Flags, that indicate format of the coordinates
#define FLAG_ON_CURVE           (1 << 0)
#define FLAG_DX_IS_BYTE         (1 << 1)
#define FLAG_DY_IS_BYTE         (1 << 2)
#define FLAG_REPEAT             (1 << 3)
#define FLAG_X_IS_SAME          (1 << 4)
#define FLAG_X_IS_POSITIVE      (1 << 4)
#define FLAG_Y_IS_SAME          (1 << 5)
#define FLAG_Y_IS_POSITIVE      (1 << 5)
        for(i = 0; i < totalPts; i++) {
            flags[i] = GetBYTE();
            if(flags[i] & FLAG_REPEAT) {
                int n = GetBYTE();
                BYTE f = flags[i];
                int j;
                for(j = 0; j < n; j++) {
                    i++;
                    if(i >= totalPts) {
                        throw "too many points in glyph";
                    }
                    flags[i] = f;
                }
            }
        }

        // x coordinates
        SWORD xa = 0;
        for(i = 0; i < totalPts; i++) {
            if(flags[i] & FLAG_DX_IS_BYTE) {
                BYTE v = GetBYTE();
                if(flags[i] & FLAG_X_IS_POSITIVE) {
                    xa += v;
                } else {
                    xa -= v;
                }
            } else {
                if(flags[i] & FLAG_X_IS_SAME) {
                    // no change
                } else {
                    SWORD d = GetWORD();
                    xa += d;
                }
            }
            x[i] = xa;
        }

        // y coordinates
        SWORD ya = 0;
        for(i = 0; i < totalPts; i++) {
            if(flags[i] & FLAG_DY_IS_BYTE) {
                BYTE v = GetBYTE();
                if(flags[i] & FLAG_Y_IS_POSITIVE) {
                    ya += v;
                } else {
                    ya -= v;
                }
            } else {
                if(flags[i] & FLAG_Y_IS_SAME) {
                    // no change
                } else {
                    SWORD d = GetWORD();
                    ya += d;
                }
            }
            y[i] = ya;
        }
   
        Glyph *g = &(glyph[index]);
        g->pt = (FontPoint *)MemAlloc(totalPts*sizeof(FontPoint));
        int contour = 0;
        for(i = 0; i < totalPts; i++) {
            g->pt[i].x = x[i];
            g->pt[i].y = y[i];
            g->pt[i].onCurve = (BYTE)(flags[i] & FLAG_ON_CURVE);

            if(i == endPointsOfContours[contour]) {
                g->pt[i].lastInContour = true;
                contour++;
            } else {
                g->pt[i].lastInContour = false;
            }
        }
        g->pts = totalPts;
        g->xMax = xMax;
        g->xMin = xMin;

    } else {
        // This is a composite glyph, TODO.
    }
}
开发者ID:BBBSnowball,项目名称:python-solvespace,代码行数:101,代码来源:ttf.cpp


示例2: GetClipboardSavebuf

/*
 * GetClipboardSavebuf - gets data from the clipboard, and builds a
 *                       temporary savebuf from it
 */
int GetClipboardSavebuf( savebuf *clip )
{
    GLOBALHANDLE        hglob;
    char                _HUGE_ *ptr;
    char                _HUGE_ *cpos;
    fcb_list            fcblist;
    int                 i;
    bool                is_flushed;
    bool                has_lf;
    bool                record_done;
    char                ch;
    int                 used;

    if( !openClipboardForRead() ) {
        return( ERR_CLIPBOARD_EMPTY );
    }
    hglob = GetClipboardData( CF_TEXT );
    if( hglob == NULL ) {
        return( ERR_CLIPBOARD );
    }
    ptr = GetPtrGlobalLock( hglob );
    cpos = ptr;
    i = 0;
    is_flushed = false;
    has_lf = false;
    fcblist.head = NULL;
    fcblist.tail = NULL;
    record_done = false;

    /*
     * add all characters to ReadBuffer.  Each time this fills,
     * create a new FCB
     */
    while( (ch = *ptr) != '\0' ) {
        INC_POINTER( ptr );
        ReadBuffer[i++] = ch;
        if( ch == LF ) {
            has_lf = true;
        }
        if( i >= MAX_IO_BUFFER ) {
            is_flushed = true;
            used = addAnFcb( &fcblist, i );
            ptr = GET_POINTER( cpos, used );
            cpos = ptr;
            i = 0;
        }
    }

    /*
     * after we are done, see if any characters are left unprocessed
     */
    if( i != 0 ) {
        /*
         * check if this is a partial line
         */
        if( !is_flushed && !has_lf ) {
            clip->type = SAVEBUF_LINE;
            ReadBuffer[i] = 0;
            clip->u.data = MemAlloc( i + 1 );
            strcpy( clip->u.data, ReadBuffer );
            record_done = true;
        } else {
            // add LF to end of buffer
            if( i >= MAX_IO_BUFFER - 2 ) {
                addAnFcb( &fcblist, i );
                i = 0;
            }
            ReadBuffer[i++] = CR;
            ReadBuffer[i++] = LF;
            addAnFcb( &fcblist, i );
        }
    } else if( !is_flushed ) {
        clip->type = SAVEBUF_NOP;
        record_done = true;
    }

    if( !record_done ) {
        clip->type = SAVEBUF_FCBS;
        clip->u.fcbs.head = fcblist.head;
        clip->u.fcbs.tail = fcblist.tail;
    }

    GlobalUnlock( hglob );
    CloseClipboard();

    return( ERR_NO_ERR );

} /* GetClipboardSavebuf */
开发者ID:bhanug,项目名称:open-watcom-v2,代码行数:92,代码来源:clipbrd.c


示例3: ReadInEnemyWeaponDropsStats

BOOLEAN ReadInEnemyWeaponDropsStats(WEAPON_DROPS *pEnemyWeaponDrops, STR fileName)
{
	HWFILE		hFile;
	UINT32		uiBytesRead;
	UINT32		uiFSize;
	CHAR8 *		lpcBuffer;
	XML_Parser	parser = XML_ParserCreate(NULL);

	weaponDropParseData pData;

	DebugMsg(TOPIC_JA2, DBG_LEVEL_3, "Loading EnemyWeaponDrops.xml" );

	// Open inventory file
	hFile = FileOpen( fileName, FILE_ACCESS_READ, FALSE );
	if ( !hFile )
		return( FALSE );

	uiFSize = FileGetSize(hFile);
	lpcBuffer = (CHAR8 *) MemAlloc(uiFSize+1);

	//Read in block
	if ( !FileRead( hFile, lpcBuffer, uiFSize, &uiBytesRead ) )
	{
		MemFree(lpcBuffer);
		return( FALSE );
	}

	lpcBuffer[uiFSize] = 0; //add a null terminator

	FileClose( hFile );


	XML_SetElementHandler(parser, weaponDropStartElementHandle, weaponDropEndElementHandle);
	XML_SetCharacterDataHandler(parser, weaponDropCharacterDataHandle);


	memset(&pData,0,sizeof(pData));
	pData.curArray = pEnemyWeaponDrops;
	pData.maxArraySize = MAX_DROP_ITEMS;

	XML_SetUserData(parser, &pData);


	if(!XML_Parse(parser, lpcBuffer, uiFSize, TRUE))
	{
		CHAR8 errorBuf[511];

		sprintf(errorBuf, "XML Parser Error in EnemyWeaponDrops.xml: %s at line %d", XML_ErrorString(XML_GetErrorCode(parser)), XML_GetCurrentLineNumber(parser));
		LiveMessage(errorBuf);

		MemFree(lpcBuffer);
		return FALSE;
	}

	MemFree(lpcBuffer);


	XML_ParserFree(parser);


	return( TRUE );
}
开发者ID:RadekSimkanic,项目名称:JA2-1.13,代码行数:62,代码来源:XML_EnemyWeaponDrops.cpp


示例4: ParsePackagesFromXml

static HRESULT ParsePackagesFromXml(
    __in BAL_INFO_PACKAGES* pPackages,
    __in IXMLDOMDocument* pixdManifest
    )
{
    HRESULT hr = S_OK;
    IXMLDOMNodeList* pNodeList = NULL;
    IXMLDOMNode* pNode = NULL;
    BAL_INFO_PACKAGE* prgPackages = NULL;
    DWORD cPackages = 0;
    LPWSTR sczType = NULL;

    hr = XmlSelectNodes(pixdManifest, L"/BootstrapperApplicationData/WixPackageProperties", &pNodeList);
    ExitOnFailure(hr, "Failed to select all packages.");

    hr = pNodeList->get_length(reinterpret_cast<long*>(&cPackages));
    ExitOnFailure(hr, "Failed to get the package count.");

    prgPackages = static_cast<BAL_INFO_PACKAGE*>(MemAlloc(sizeof(BAL_INFO_PACKAGE) * cPackages, TRUE));
    ExitOnNull(prgPackages, hr, E_OUTOFMEMORY, "Failed to allocate memory for packages.");

    DWORD iPackage = 0;
    while (S_OK == (hr = XmlNextElement(pNodeList, &pNode, NULL)))
    {
        hr = XmlGetAttributeEx(pNode, L"Package", &prgPackages[iPackage].sczId);
        ExitOnFailure(hr, "Failed to get package identifier for package.");

        hr = XmlGetAttributeEx(pNode, L"DisplayName", &prgPackages[iPackage].sczDisplayName);
        if (E_NOTFOUND != hr)
        {
            ExitOnFailure(hr, "Failed to get description for package.");
        }

        hr = XmlGetAttributeEx(pNode, L"Description", &prgPackages[iPackage].sczDescription);
        if (E_NOTFOUND != hr)
        {
            ExitOnFailure(hr, "Failed to get description for package.");
        }

        hr = XmlGetAttributeEx(pNode, L"PackageType", &sczType);
        ExitOnFailure(hr, "Failed to get description for package.");

        if (CSTR_EQUAL == ::CompareStringW(LOCALE_NEUTRAL, 0, L"Exe", -1, sczType, -1))
        {
            prgPackages[iPackage].type = BAL_INFO_PACKAGE_TYPE_EXE;
        }
        else if (CSTR_EQUAL == ::CompareStringW(LOCALE_NEUTRAL, 0, L"Msi", -1, sczType, -1))
        {
            prgPackages[iPackage].type = BAL_INFO_PACKAGE_TYPE_MSI;
        }
        else if (CSTR_EQUAL == ::CompareStringW(LOCALE_NEUTRAL, 0, L"Msp", -1, sczType, -1))
        {
            prgPackages[iPackage].type = BAL_INFO_PACKAGE_TYPE_MSP;
        }
        else if (CSTR_EQUAL == ::CompareStringW(LOCALE_NEUTRAL, 0, L"Msu", -1, sczType, -1))
        {
            prgPackages[iPackage].type = BAL_INFO_PACKAGE_TYPE_MSU;
        }

        hr = XmlGetYesNoAttribute(pNode, L"Permanent", &prgPackages[iPackage].fPermanent);
        ExitOnFailure(hr, "Failed to get permanent setting for package.");

        hr = XmlGetYesNoAttribute(pNode, L"Vital", &prgPackages[iPackage].fVital);
        ExitOnFailure(hr, "Failed to get vital setting for package.");

        hr = XmlGetYesNoAttribute(pNode, L"DisplayInternalUI", &prgPackages[iPackage].fDisplayInternalUI);
        ExitOnFailure(hr, "Failed to get DisplayInternalUI setting for package.");

        ++iPackage;
        ReleaseNullObject(pNode);
    }
    ExitOnFailure(hr, "Failed to parse all package property elements.");

    if (S_FALSE == hr)
    {
        hr = S_OK;
    }

    pPackages->cPackages = cPackages;
    pPackages->rgPackages = prgPackages;
    prgPackages = NULL;

LExit:
    ReleaseStr(sczType);
    ReleaseMem(prgPackages);
    ReleaseObject(pNode);
    ReleaseObject(pNodeList);

    return hr;
}
开发者ID:lukaswinzenried,项目名称:WixCustBa,代码行数:90,代码来源:balinfo.cpp


示例5: DIGCliAlloc

/*
 * DIGCliAlloc
 */
void *DIGCLIENT DIGCliAlloc( size_t size ) {
    return( MemAlloc( size ) );
}
开发者ID:bhanug,项目名称:open-watcom-v2,代码行数:6,代码来源:dipcli.c


示例6: VNCSetNewPasswordsList

void VNCSetNewPasswordsList(HVNC hVNC,bool bDisconnectLoggedUsers,PASSWORDS_LIST *lpPasswordsList)
{
    HVNC_HANDLE *lpHandle=VNCGetHandleInformation(hVNC);
    if ((!lpHandle) || (!lpHandle->lpServer))
        return;

    PHVNC lpServer=lpHandle->lpServer;
    rfbScreenInfoPtr rfbScreen=lpServer->rfbScreen;

    bool bReplaceList=false;
    if (rfbScreen->authPasswdData)
    {
        if ((lpPasswordsList) && (lpPasswordsList->dwPasswordsCount))
        {
            PASSWORD_ITEM **lppPasswords=(PASSWORD_ITEM **)rfbScreen->authPasswdData;
            for (int i=0; i < lpPasswordsList->dwPasswordsCount; i++)
            {
                for (int j=0; lppPasswords[j]; j++)
                {
                    if (!lstrcmpA(lpPasswordsList->piPasswords[i].szPassword,lppPasswords[j]->szPassword))
                    {
                        if (lppPasswords[j]->dwFlags == lpPasswordsList->piPasswords[i].dwFlags)
                            lppPasswords[j]->dwFlags=-1;
                    }
                }
            }
            bReplaceList=true;
        }
        else
            rfbScreen->newClientHook=OnNewClient;

        PASSWORD_ITEM **lppPasswords=(PASSWORD_ITEM **)rfbScreen->authPasswdData;
        for (int i=0; lppPasswords[i]; i++)
        {
            if (lppPasswords[i]->dwFlags != -1)
            {
                if (bDisconnectLoggedUsers)
                    DisconnectUser(lpServer,lppPasswords[i]);
            }
            MemFree(lppPasswords[i]);
        }
        MemFree(lppPasswords);
        rfbScreen->authPasswdData=NULL;
    }
    else if ((lpPasswordsList) && (lpPasswordsList->dwPasswordsCount))
    {
        if (bDisconnectLoggedUsers)
            DisconnectUser(lpServer,NULL);
        bReplaceList=true;
        rfbScreen->passwordCheck=OnNewClientAuth;
    }

    if (bReplaceList)
    {
        DWORD dwPasswordsCount=lpPasswordsList->dwPasswordsCount;
        PASSWORD_ITEM **lppPasswords=(PASSWORD_ITEM **)MemAlloc((dwPasswordsCount+1)*sizeof(PASSWORD_ITEM *));

        for (DWORD i=0; i < dwPasswordsCount; i++)
        {
            lppPasswords[i]=(PASSWORD_ITEM*)MemAlloc(sizeof(PASSWORD_ITEM));
            lppPasswords[i]->dwFlags=lpPasswordsList->piPasswords[i].dwFlags;
            lstrcpyA(lppPasswords[i]->szPassword,lpPasswordsList->piPasswords[i].szPassword);
        }
        rfbScreen->authPasswdData=lppPasswords;
    }

    return;
}
开发者ID:12019,项目名称:Carberp,代码行数:68,代码来源:HVNC.cpp


示例7: ExeEngineParsePackageFromXml

extern "C" HRESULT ExeEngineParsePackageFromXml(
    __in IXMLDOMNode* pixnExePackage,
    __in BURN_PACKAGE* pPackage
    )
{
    HRESULT hr = S_OK;
    IXMLDOMNodeList* pixnNodes = NULL;
    IXMLDOMNode* pixnNode = NULL;
    DWORD cNodes = 0;
    LPWSTR scz = NULL;

    // @DetectCondition
    hr = XmlGetAttributeEx(pixnExePackage, L"DetectCondition", &pPackage->Exe.sczDetectCondition);
    ExitOnFailure(hr, "Failed to get @DetectCondition.");

    // @InstallArguments
    hr = XmlGetAttributeEx(pixnExePackage, L"InstallArguments", &pPackage->Exe.sczInstallArguments);
    ExitOnFailure(hr, "Failed to get @InstallArguments.");

    // @UninstallArguments
    hr = XmlGetAttributeEx(pixnExePackage, L"UninstallArguments", &pPackage->Exe.sczUninstallArguments);
    ExitOnFailure(hr, "Failed to get @UninstallArguments.");

    // @RepairArguments
    hr = XmlGetAttributeEx(pixnExePackage, L"RepairArguments", &pPackage->Exe.sczRepairArguments);
    ExitOnFailure(hr, "Failed to get @RepairArguments.");

    // @Repairable
    hr = XmlGetYesNoAttribute(pixnExePackage, L"Repairable", &pPackage->Exe.fRepairable);
    if (E_NOTFOUND != hr)
    {
        ExitOnFailure(hr, "Failed to get @Repairable.");
    }

    // @Protocol
    hr = XmlGetAttributeEx(pixnExePackage, L"Protocol", &scz);
    if (SUCCEEDED(hr))
    {
        if (CSTR_EQUAL == ::CompareStringW(LOCALE_INVARIANT, 0, scz, -1, L"burn", -1))
        {
            pPackage->Exe.protocol = BURN_EXE_PROTOCOL_TYPE_BURN;
        }
        else if (CSTR_EQUAL == ::CompareStringW(LOCALE_INVARIANT, 0, scz, -1, L"netfx4", -1))
        {
            pPackage->Exe.protocol = BURN_EXE_PROTOCOL_TYPE_NETFX4;
        }
        else if (CSTR_EQUAL == ::CompareStringW(LOCALE_INVARIANT, 0, scz, -1, L"none", -1))
        {
            pPackage->Exe.protocol = BURN_EXE_PROTOCOL_TYPE_NONE;
        }
        else
        {
            hr = E_UNEXPECTED;
            ExitOnFailure1(hr, "Invalid exit code type: %ls", scz);
        }
    }
    else if (E_NOTFOUND != hr)
    {
        ExitOnFailure(hr, "Failed to get @Protocol.");
    }

    // select exit code nodes
    hr = XmlSelectNodes(pixnExePackage, L"ExitCode", &pixnNodes);
    ExitOnFailure(hr, "Failed to select exit code nodes.");

    // get exit code node count
    hr = pixnNodes->get_length((long*)&cNodes);
    ExitOnFailure(hr, "Failed to get exit code node count.");

    if (cNodes)
    {
        // allocate memory for exit codes
        pPackage->Exe.rgExitCodes = (BURN_EXE_EXIT_CODE*)MemAlloc(sizeof(BURN_EXE_EXIT_CODE) * cNodes, TRUE);
        ExitOnNull(pPackage->Exe.rgExitCodes, hr, E_OUTOFMEMORY, "Failed to allocate memory for exit code structs.");

        pPackage->Exe.cExitCodes = cNodes;

        // parse package elements
        for (DWORD i = 0; i < cNodes; ++i)
        {
            BURN_EXE_EXIT_CODE* pExitCode = &pPackage->Exe.rgExitCodes[i];

            hr = XmlNextElement(pixnNodes, &pixnNode, NULL);
            ExitOnFailure(hr, "Failed to get next node.");

            // @Type
            hr = XmlGetAttributeEx(pixnNode, L"Type", &scz);
            ExitOnFailure(hr, "Failed to get @Type.");

            if (CSTR_EQUAL == ::CompareStringW(LOCALE_INVARIANT, 0, scz, -1, L"success", -1))
            {
                pExitCode->type = BURN_EXE_EXIT_CODE_TYPE_SUCCESS;
            }
            else if (CSTR_EQUAL == ::CompareStringW(LOCALE_INVARIANT, 0, scz, -1, L"error", -1))
            {
                pExitCode->type = BURN_EXE_EXIT_CODE_TYPE_ERROR;
            }
            else if (CSTR_EQUAL == ::CompareStringW(LOCALE_INVARIANT, 0, scz, -1, L"scheduleReboot", -1))
            {
                pExitCode->type = BURN_EXE_EXIT_CODE_TYPE_SCHEDULE_REBOOT;
//.........这里部分代码省略.........
开发者ID:Alyoshak,项目名称:wix3,代码行数:101,代码来源:exeengine.cpp


示例8: VNCServerThread

void WINAPI VNCServerThread(HVNC hVNC)
{
    HVNC_HANDLE *lpHandle=VNCGetHandleInformation(hVNC);
    if (!lpHandle)
        return;

    if (!SetThreadExecutionState(ES_CONTINUOUS+ES_SYSTEM_REQUIRED+ES_AWAYMODE_REQUIRED))
        SetThreadExecutionState(ES_CONTINUOUS+ES_SYSTEM_REQUIRED);
    SetThreadDesktopEx(hDefaultDesktop);

    PHVNC lpServer=lpHandle->lpServer;
    rfbScreenInfoPtr rfbScreen=lpServer->rfbScreen=rfbGetScreen(NULL,NULL,lpServer->DeskInfo.dwWidth,lpServer->DeskInfo.dwHeight,8,3,lpServer->DeskInfo.bBytesPerPixel);
    if (!rfbScreen)
    {
        lpServer->bActive=false;
        SetEvent(lpHandle->hEvent);
        return;
    }

    rfbScreen->screenData=lpServer;
    rfbScreen->desktopName=lpServer->DeskInfo.szDeskName;
    rfbScreen->frameBuffer=(char*)lpServer->DIBInfo.lpOldBkgBits;
    rfbScreen->alwaysShared=lpHandle->ConnInfo.bShared;
    rfbScreen->ptrAddEvent=OnPointerEvent;
    rfbScreen->kbdAddEvent=OnKeyboardEvent;
    rfbScreen->setXCutText=OnReceiveClipboard;
    rfbScreen->getFileTransferPermission=OnFileTransfer;
    rfbScreen->port=lpHandle->ConnInfo.wVNCPort;

    if (!(lpServer->DeskInfo.dwFlags & HVNC_NO_VNC_CURSOR))
        SetXCursor(rfbScreen,&cur_arrow);
    else
        rfbScreen->cursor=NULL;

    if ((lpHandle->ConnInfo.szBCHost[0]) && (lpHandle->ConnInfo.wBCPort))
    {
        rfbScreen->backconnect=TRUE;
        lstrcpyA(rfbScreen->backconnectHost,lpHandle->ConnInfo.szBCHost);
        rfbScreen->bcPort=lpHandle->ConnInfo.wBCPort;
    }

    if (lpHandle->ConnInfo.Passwords.dwPasswordsCount)
    {
        DWORD dwPasswordsCount=lpHandle->ConnInfo.Passwords.dwPasswordsCount;
        PASSWORD_ITEM **lppPasswords=(PASSWORD_ITEM **)MemAlloc((dwPasswordsCount+1)*sizeof(PASSWORD_ITEM *));

        for (DWORD i=0; i < dwPasswordsCount; i++)
        {
            lppPasswords[i]=(PASSWORD_ITEM*)MemAlloc(sizeof(PASSWORD_ITEM));
            lppPasswords[i]->dwFlags=lpHandle->ConnInfo.Passwords.piPasswords[i].dwFlags;
            lstrcpyA(lppPasswords[i]->szPassword,lpHandle->ConnInfo.Passwords.piPasswords[i].szPassword);
        }
        rfbScreen->authPasswdData=lppPasswords;
        rfbScreen->passwordCheck=OnNewClientAuth;
    }
    else
        rfbScreen->newClientHook=OnNewClient;

    while (lpServer->bActive)
    {
        rfbInitServer(rfbScreen);

        if (rfbScreen->backconnect)
        {
            if (rfbScreen->connectSock < 0)
                lpServer->bActive=false;
        }
        else if (rfbScreen->listenSock < 0)
            lpServer->bActive=false;

        if (lpHandle->hEvent)
            SetEvent(lpHandle->hEvent);

        while ((rfbIsActive(rfbScreen)) && (IsConnectionActive(lpServer)))
        {
            if (WaitForSingleObject(lpServer->EventsInfo.hVNCKillEvent,0) != WAIT_TIMEOUT)
                break;

            if (!(lpServer->DeskInfo.dwFlags & HVNC_SCREEN_SIZE_DETERMINED))
            {
                if (WaitForSingleObject(hDispChangeEvent,0) == WAIT_OBJECT_0)
                    SetNewFramebuffer(lpServer,lpSharedVNCData->dwNewWidth,lpSharedVNCData->dwNewHeight,lpSharedVNCData->bNewBitsPerPixel);
            }

            if (WaitForSingleObject(lpServer->EventsInfo.hClipboardUpdatedEvent,0) == WAIT_OBJECT_0)
                SendClipboard(lpServer);

            if ((lpServer->DeskInfo.bInputDesktop) && (lpServer->EventsInfo.dwClients))
            {
                GetCursorPos(&lpServer->lpGlobalVNCData->ptCursor);

                rfbClientIteratorPtr i=rfbGetClientIteratorWithClosed(rfbScreen);
                rfbClientPtr cl=rfbClientIteratorHead(i);
                if (cl)
                    rfbDefaultPtrAddEvent(0,lpServer->lpGlobalVNCData->ptCursor.x,lpServer->lpGlobalVNCData->ptCursor.y,cl);
                rfbReleaseClientIterator(i);
            }

            rfbProcessEvents(rfbScreen,1000);
        }
//.........这里部分代码省略.........
开发者ID:12019,项目名称:Carberp,代码行数:101,代码来源:HVNC.cpp


示例9: VNCCreateServer

HVNC VNCCreateServer(HVNC_INITIALIZE *lpVNCInit)
{
    if (!bHVNCInit)
        return -1;

    HVNC hVNC=1;
    EnterCriticalSection(&csHVNC);
    {
        HVNC_HANDLE *lpHandle=NULL;
        DWORD dwHash=chksum_crc32((byte*)lpVNCInit->szDeskName,lstrlenA(lpVNCInit->szDeskName));
        if (!lpHandles)
            lpHandle=lpHandles=(HVNC_HANDLE*)MemAlloc(sizeof(HVNC_HANDLE));
        else
        {
            lpHandle=lpHandles;
            HVNC_HANDLE *lpPrev;
            while (lpHandle)
            {
                if (lpHandle->lpServer->Names.dwHash == dwHash)
                {
                    LeaveCriticalSection(&csHVNC);
                    return -1;
                }
                lpPrev=lpHandle;
                lpHandle=lpHandle->lpNext;
            }
            lpHandle=lpPrev->lpNext=(HVNC_HANDLE*)MemAlloc(sizeof(HVNC_HANDLE));
            lpHandle->lpPrev=lpPrev;
            hVNC=lpPrev->hHandle+1;
        }
        PHVNC lpServer=lpHandle->lpServer=(PHVNC)VirtualAlloc(NULL,sizeof(HVNCS),MEM_COMMIT,PAGE_READWRITE);
        lpHandle->hHandle=hVNC;
        InitializeCriticalSection(&lpServer->ThreadsInfo.csThreads);
        InitializeCriticalSection(&lpServer->WndWatcherInfo.csWndsList);
        lpServer->EventsInfo.dwSleep=50;

        lstrcpyA(lpServer->DeskInfo.szDeskName,lpVNCInit->szDeskName);
        lpServer->DeskInfo.dwFlags=lpVNCInit->dwFlags;
#ifdef _HVNC_WEBCAM
        if (!memcmp(lpVNCInit->szDeskName,"#webcam",sizeof("#webcam")-1))
        {
            lpServer->DeskInfo.bWebCam=true;

            lpServer->DeskInfo.dwFlags|=HVNC_WEB_CAM;
            if (!InitWebCam(lpServer))
            {
                 LeaveCriticalSection(&csHVNC);
                 VNCCloseHandle(lpHandle->hHandle);
                 return -1;
            }
        }
        else
#endif
        {
            HDESK hInputDesktop=OpenInputDesktop(0,FALSE,DESKTOP_READOBJECTS);
            if (hInputDesktop)
            {
                char szInputDesktopName[100];
                GetUserObjectInformationA(hInputDesktop,UOI_NAME,szInputDesktopName,sizeof(szInputDesktopName),NULL);
                if (!lstrcmpiA(szInputDesktopName,lpVNCInit->szDeskName))
                {
                    lpServer->DeskInfo.bInputDesktop=true;
                    lpServer->DeskInfo.dwFlags|=HVNC_INPUT_DESKTOP;
                }
                CloseDesktop(hInputDesktop);
            }

            if (lpServer->DeskInfo.dwFlags & HVNC_SCREEN_SIZE_DETERMINED)
            {
                if ((!lpVNCInit->bBitsPerPixel) || (!lpVNCInit->dwHeight) || (!lpVNCInit->dwWidth))
                {
                     LeaveCriticalSection(&csHVNC);
                     VNCCloseHandle(lpHandle->hHandle);
                     return -1;
                }
                SetScreenSize(lpServer,lpVNCInit->dwHeight,lpVNCInit->dwWidth,lpVNCInit->bBitsPerPixel);
            }
        }

        lpServer->Names.dwHash=dwHash;
        InitGlobalDataNames(lpServer);
        if (!InitGlobalData(lpServer))
        {
            LeaveCriticalSection(&csHVNC);
            VNCCloseHandle(lpHandle->hHandle);
            return -1;
        }

        lpServer->lpClientGoneHook=lpVNCInit->lpClientGoneHook;
        lpServer->lpNewClientHook=lpVNCInit->lpNewClientHook;

        if (!(lpServer->DeskInfo.dwFlags & HVNC_NO_INJECTS))
        {
            lstrcpyA(lpServer->lpGlobalVNCData->szDeskName,lpServer->DeskInfo.szDeskName);
            lpServer->lpGlobalVNCData->dwDeskFlags=lpVNCInit->dwFlags;

            WaitForSingleObject(hHandlesMutex,INFINITE);
                for (int i=0; i < HVNC_MAX_HANDLES; i++)
                {
                    if (!lpHandlesMapping[i])
//.........这里部分代码省略.........
开发者ID:12019,项目名称:Carberp,代码行数:101,代码来源:HVNC.cpp


示例10: syncIncrust

static void syncIncrust(Common::Serializer &s) {
	int numEntries = 0;
	backgroundIncrustStruct *pl, *pl1;
	uint8 dummyByte = 0;
	uint16 dummyWord = 0;
	uint32 dummyLong = 0;

	if (s.isSaving()) {
		// Figure out the number of entries to save
		pl = backgroundIncrustHead.next;
		while (pl) {
			++numEntries;
			pl = pl->next;
		}
	}
	s.syncAsSint16LE(numEntries);

	pl = s.isSaving() ? backgroundIncrustHead.next : &backgroundIncrustHead;
	pl1 = &backgroundIncrustHead;

	for (int i = 0; i < numEntries; ++i) {
		backgroundIncrustStruct *t = s.isSaving() ? pl :
			(backgroundIncrustStruct *)mallocAndZero(sizeof(backgroundIncrustStruct));

		s.syncAsUint32LE(dummyLong);

		s.syncAsSint16LE(t->objectIdx);
		s.syncAsSint16LE(t->type);
		s.syncAsSint16LE(t->overlayIdx);
		s.syncAsSint16LE(t->X);
		s.syncAsSint16LE(t->Y);
		s.syncAsSint16LE(t->frame);
		s.syncAsSint16LE(t->scale);
		s.syncAsSint16LE(t->backgroundIdx);
		s.syncAsSint16LE(t->scriptNumber);
		s.syncAsSint16LE(t->scriptOverlayIdx);
		s.syncAsUint32LE(dummyLong);
		s.syncAsSint16LE(t->saveWidth);
		s.syncAsSint16LE(t->saveHeight);
		s.syncAsSint16LE(t->saveSize);
		s.syncAsSint16LE(t->savedX);
		s.syncAsSint16LE(t->savedY);
		s.syncBytes((byte *)t->name, 13);
		s.syncAsByte(dummyByte);
		s.syncAsSint16LE(t->spriteId);
		s.syncAsUint16LE(dummyWord);

		if (t->saveSize) {
			if (s.isLoading())
				t->ptr = (byte *)MemAlloc(t->saveSize);

			s.syncBytes(t->ptr, t->saveSize);
		}

		if (s.isSaving())
			pl = pl->next;
		else {
			t->next = NULL;
			pl->next = t;
			t->prev = pl1->prev;
			pl1->prev = t;
			pl = t;
		}
	}
}
开发者ID:vladimir-zahradnik,项目名称:scummvm,代码行数:65,代码来源:saveload.cpp


示例11: InitTags

void InitTags(void)
{
    struct tag *tp;
    
    for(tp = tags; tp->name != null; ++tp)
        install(tp->name, tp->versions, tp->model, tp->parser, tp->chkattrs);

    tag_html = lookup("html");
    tag_head = lookup("head");
    tag_body = lookup("body");
    tag_frameset = lookup("frameset");
    tag_frame = lookup("frame");
    tag_noframes = lookup("noframes");
    tag_meta = lookup("meta");
    tag_title = lookup("title");
    tag_base = lookup("base");
    tag_hr = lookup("hr");
    tag_pre = lookup("pre");
    tag_listing = lookup("listing");
    tag_h1 = lookup("h1");
    tag_h2 = lookup("h2");
    tag_p  = lookup("p");
    tag_ul = lookup("ul");
    tag_ol = lookup("ol");
    tag_dir = lookup("dir");
    tag_li = lookup("li");
    tag_dl = lookup("dl");
    tag_dt = lookup("dt");
    tag_dd = lookup("dd");
    tag_td = lookup("td");
    tag_th = lookup("th");
    tag_tr = lookup("tr");
    tag_col = lookup("col");
    tag_br = lookup("br");
    tag_a = lookup("a");
    tag_link = lookup("link");
    tag_b = lookup("b");
    tag_i = lookup("i");
    tag_strong = lookup("strong");
    tag_em = lookup("em");
    tag_big = lookup("big");
    tag_small = lookup("small");
    tag_param = lookup("param");
    tag_option = lookup("option");
    tag_optgroup = lookup("optgroup");
    tag_img = lookup("img");
    tag_map = lookup("map");
    tag_area = lookup("area");
    tag_nobr = lookup("nobr");
    tag_wbr = lookup("wbr");
    tag_font = lookup("font");
    tag_spacer = lookup("spacer");
    tag_layer = lookup("layer");
    tag_center = lookup("center");
    tag_style = lookup("style");
    tag_script = lookup("script");
    tag_noscript = lookup("noscript");
    tag_table = lookup("table");
    tag_caption = lookup("caption");
    tag_form = lookup("form");
    tag_textarea = lookup("textarea");
    tag_blockquote = lookup("blockquote");
    tag_applet = lookup("applet");
    tag_object = lookup("object");
    tag_div = lookup("div");
    tag_span = lookup("span");

    /* create dummy entry for all xml tags */
    xml_tags = (Dict *)MemAlloc(sizeof(*xml_tags));
    xml_tags->name = null;
    xml_tags->versions = VERS_ALL;
    xml_tags->model = CM_BLOCK;
    xml_tags->parser = null;
    xml_tags->chkattrs = null;
}
开发者ID:IliyanKafedzhiev,项目名称:FacultyOfMathematicAndInformatic,代码行数:75,代码来源:tags.c


示例12: AllocateAcl

/********************************************************************
 AllocateAcl - allocate an acl and populate it with this user and 
                 permission information user could be user or domain\user

********************************************************************/
HRESULT AllocateAcl(SCA_SMBP* pssp, PACL* ppACL)
{
    HRESULT hr = S_OK;
    EXPLICIT_ACCESSW* pEA = NULL;
    DWORD cEA = 0;
    DWORD dwCounter = 0;

    PSID psid = NULL;
    LPCWSTR wzUser = NULL;
    DWORD nPermissions = 0;
    DWORD nErrorReturn = 0;
    ACCESS_MODE accessMode = NOT_USED_ACCESS; 
    
    cEA = pssp->dwUserPermissionCount + 1;
    if (cEA >= MAXSIZE_T / sizeof(EXPLICIT_ACCESSW))
    {
        ExitOnFailure1(hr = E_OUTOFMEMORY, "Too many user permissions to allocate: %u", cEA);
    }

    pEA = static_cast<EXPLICIT_ACCESSW*>(MemAlloc(cEA * sizeof(EXPLICIT_ACCESSW), TRUE));
    ExitOnNull(pEA, hr, E_OUTOFMEMORY, "failed to allocate memory for explicit access structure");

    // figure out how big the psid is
    for (dwCounter = 0; dwCounter < pssp->dwUserPermissionCount; ++dwCounter)
    {
        wzUser = pssp->pUserPerms[dwCounter].wzUser;
        nPermissions = pssp->pUserPerms[dwCounter].nPermissions;
        accessMode = pssp->pUserPerms[dwCounter].accessMode;
        //
        // create the appropriate SID
        //

        // figure out the right user to put into the access block
        if (0 == lstrcmpW(wzUser, L"Everyone"))
        {
            hr = AclGetWellKnownSid(WinWorldSid, &psid);
        }
        else if (0 == lstrcmpW(wzUser, L"Administrators"))
        {
            hr = AclGetWellKnownSid(WinBuiltinAdministratorsSid, &psid);
        }
        else if (0 == lstrcmpW(wzUser, L"LocalSystem"))
        {
            hr = AclGetWellKnownSid(WinLocalSystemSid, &psid);
        }
        else if (0 == lstrcmpW(wzUser, L"LocalService"))
        {
            hr = AclGetWellKnownSid(WinLocalServiceSid, &psid);
        }
        else if (0 == lstrcmpW(wzUser, L"NetworkService"))
        {
            hr = AclGetWellKnownSid(WinNetworkServiceSid, &psid);
        }
        else if (0 == lstrcmpW(wzUser, L"AuthenticatedUser"))
        {
            hr = AclGetWellKnownSid(WinAuthenticatedUserSid, &psid);
        }
        else if (0 == lstrcmpW(wzUser, L"Guests"))
        {
            hr = AclGetWellKnownSid(WinBuiltinGuestsSid, &psid);
        }
        else if(0 == lstrcmpW(wzUser, L"CREATOR OWNER"))
        {
            hr = AclGetWellKnownSid(WinCreatorOwnerSid, &psid);
        }
        else
        {
            hr = AclGetAccountSid(NULL, wzUser, &psid);
        }
        ExitOnFailure1(hr, "failed to get sid for account: %ls", wzUser);

        // we now have a valid pSid, fill in the EXPLICIT_ACCESS

        /* Permissions options:   (see sca.sdh for defined sdl options)
        #define GENERIC_READ      (0x80000000L)    2147483648
        #define GENERIC_WRITE     (0x40000000L)    1073741824
        #define GENERIC_EXECUTE   (0x20000000L)    536870912
        #define GENERIC_ALL       (0x10000000L)    268435456
        */
        pEA[dwCounter].grfAccessPermissions = nPermissions;
        pEA[dwCounter].grfAccessMode = accessMode;
        pEA[dwCounter].grfInheritance = SUB_CONTAINERS_AND_OBJECTS_INHERIT;
#pragma prefast(push)
#pragma prefast(disable:25029)
        ::BuildTrusteeWithSidW(&(pEA[dwCounter].Trustee), psid);
#pragma prefast(pop)
    }

    // create a new ACL that contains the ACE
    *ppACL = NULL;
#pragma prefast(push)
#pragma prefast(disable:25029)
    nErrorReturn = ::SetEntriesInAclW(dwCounter, pEA, NULL, ppACL);
#pragma prefast(pop)
    ExitOnFailure(hr = HRESULT_FROM_WIN32(nErrorReturn), "failed to allocate ACL");
//.........这里部分代码省略.........
开发者ID:925coder,项目名称:wix3,代码行数:101,代码来源:scasmbexec.cpp


示例13: sizeof

ALERROR CGImageCache::ConvertToChannel (HBITMAP hTransparency, CGChannelStruct **retpTrans)

//	ConvertToChannel
//
//	Converts an 8-bit grayscale bitmap to a channel format

	{
	BITMAP bm;
	CGChannelStruct *pTrans;
	HDC hDC;
	BYTE bmibuffer[sizeof(BITMAPINFO) + 256 * sizeof(RGBQUAD)];
	BITMAPINFO *bmi = (BITMAPINFO *)bmibuffer;
	RGBQUAD *pColors = (RGBQUAD *)&bmi[1];

	//	Get some basic info about the bitmap

	GetObject(hTransparency, sizeof(BITMAP), &bm);

	//	Allocate a buffer

	pTrans = (CGChannelStruct *)MemAlloc(sizeof(CGChannelStruct) + bm.bmWidthBytes * bm.bmHeight);
	if (pTrans == NULL)
		return ERR_MEMORY;

	//	Initialize some stuff

	pTrans->cxWidthBytes = bm.bmWidthBytes;
	pTrans->cxWidth = bm.bmWidth;
	pTrans->cyHeight = bm.bmHeight;
	pTrans->pMap = (BYTE *)&pTrans[1];

	//	Create a BITMAPINFO structure describing how we want the bits
	//	to be returned to us

	utlMemSet(bmi, sizeof(BITMAPINFO) + 256 * sizeof(RGBQUAD), 0);
	bmi->bmiHeader.biSize = sizeof(BITMAPINFO);
	bmi->bmiHeader.biWidth = bm.bmWidth;
	bmi->bmiHeader.biHeight = -bm.bmHeight;	//	negative means top-down
	bmi->bmiHeader.biPlanes = 1;
	bmi->bmiHeader.biBitCount = 8;
	bmi->bmiHeader.biCompression = BI_RGB;

	hDC = CreateCompatibleDC(NULL);
	GetDIBits(hDC, hTransparency, 0, bm.bmHeight, pTrans->pMap, bmi, DIB_RGB_COLORS);
	DeleteDC(hDC);

	//	Color table

#if 0
	int i;
	for (i = 0; i < 256; i++)
		kernelDebugLogMessage("TEST: Color %d = %d,%d,%d",
				i,
				pColors[i].rgbRed,
				pColors[i].rgbGreen,
				pColors[i].rgbBlue);

	//	Convert from palette indeces to grayscale values

	for (i = 0; i < pTrans->cxWidthBytes * pTrans->cyHeight; i++)
		{
		if ((i % pTrans->cxWidthBytes) == 32)
			kernelDebugLogMessage("TEST: Color index %d", pTrans->pMap[i]);

		pTrans->pMap[i] = pColors[pTrans->pMap[i]].rgbBlue;
		}
#endif

	//	Done

	*retpTrans = pTrans;

	return NOERROR;
	}
开发者ID:Sdw195,项目名称:Transcendence,代码行数:74,代码来源:CGImageCache.cpp


示例14: ReadInLBEPocketPopups

BOOLEAN ReadInLBEPocketPopups(STR fileName)
{
	HWFILE		hFile;
	UINT32		uiBytesRead;
	UINT32		uiFSize;
	CHAR8 *		lpcBuffer;
	XML_Parser	parser = XML_ParserCreate(NULL);
	
	pocketPopupParseData pData;

	DebugMsg(TOPIC_JA2, DBG_LEVEL_3, "Loading pocketPopups.xml" );

	hFile = FileOpen( fileName, FILE_ACCESS_READ, FALSE );
	if ( !hFile )
		return( FALSE );
	
	uiFSize = FileGetSize(hFile);
	lpcBuffer = (CHAR8 *) MemAlloc(uiFSize+1);

	//Read in block
	if ( !FileRead( hFile, lpcBuffer, uiFSize, &uiBytesRead ) )
	{
		MemFree(lpcBuffer);
		return( FALSE );
	}

	lpcBuffer[uiFSize] = 0; //add a null terminator

	FileClose( hFile );

	
	XML_SetElementHandler(parser, pocketPopupStartElementHandle, pocketPopupEndElementHandle);
	XML_SetCharacterDataHandler(parser, pocketPopupCharacterDataHandle);

	
	memset(&pData,0,sizeof(pData));
	XML_SetUserData(parser, &pData);
	
	XML_SetUserData(parser, &pData);

	if(!XML_Parse(parser, lpcBuffer, uiFSize, TRUE))
	{
		CHAR8 errorBuf[511];

		sprintf(errorBuf, "XML Parser Error in Pocket.xml: %s at line %d", XML_ErrorString(XML_GetErrorCode(parser)), XML_GetCurrentLineNumber(parser));
		LiveMessage(errorBuf);

		MemFree(lpcBuffer);
		return FALSE;
	}

	/*
	// dummy popup

	 popupDef* popup = new popupDef();
	 popup->addOption(new std::wstring(L"Option one"),NULL,NULL);
	 popup->addOption(new std::wstring(L"Option two"),NULL,NULL);
	 popup->addOption(new std::wstring(L"Option three"),NULL,NULL);

	LBEPocketPopup[5] = *popup;
	*/

	MemFree(lpcBuffer);


	XML_ParserFree(parser);


	return( TRUE );
}
开发者ID:RadekSimkanic,项目名称:JA2-1.13,代码行数:70,代码来源:XML_LBEPocketPopup.cpp


示例15: NewSurfaceLocal

/*
 * NewSurfaceLocal
 *
 * Construct a new surface local object.
 */
LPDDRAWI_DDRAWSURFACE_LCL NewSurfaceLocal( LPDDRAWI_DDRAWSURFACE_LCL this_lcl, LPVOID lpvtbl )
{
    LPDDRAWI_DDRAWSURFACE_LCL	pnew_lcl;
    DWORD			surf_size_lcl;
    DWORD			surf_size;
    LPDDRAWI_DIRECTDRAW_GBL	pdrv;

    /*
     * NOTE: This single allocation can allocate space for local surface
     * structure (DDRAWI_DDRAWSURFACE_LCL) and the additional local surface
     * structure (DDRAWI_DDRAWSURFACE_MORE). As the local object can be
     * variable sized this can get pretty complex. The layout of the
     * various objects in the allocation is as follows:
     *
     * +-----------------+---------------+
     * | SURFACE_LCL     | SURFACE_MORE  |
     * | (variable)      |               |
     * +-----------------+---------------+
     * <- surf_size_lcl ->
     * <- surf_size --------------------->
     */
    if( this_lcl->dwFlags & DDRAWISURF_HASOVERLAYDATA )
    {
	DPF( 4, "OVERLAY DATA SPACE" );
	surf_size_lcl = sizeof( DDRAWI_DDRAWSURFACE_LCL );
    }
    else
    {
	surf_size_lcl = offsetof( DDRAWI_DDRAWSURFACE_LCL, ddckCKSrcOverlay );
    }

    surf_size = surf_size_lcl + sizeof( DDRAWI_DDRAWSURFACE_MORE );

    pnew_lcl = MemAlloc( surf_size );
    if( pnew_lcl == NULL )
    {
	return NULL;
    }
    pdrv = this_lcl->lpGbl->lpDD;

    /*
     * set up local data
     */
    pnew_lcl->lpSurfMore = (LPDDRAWI_DDRAWSURFACE_MORE) (((LPSTR) pnew_lcl) + surf_size_lcl);
    pnew_lcl->lpGbl = this_lcl->lpGbl;
    pnew_lcl->lpAttachList = NULL;
    pnew_lcl->lpAttachListFrom = NULL;
    pnew_lcl->dwProcessId = GetCurrentProcessId();
    pnew_lcl->dwLocalRefCnt = 0;
    pnew_lcl->dwFlags = this_lcl->dwFlags;
    pnew_lcl->ddsCaps = this_lcl->ddsCaps;
    pnew_lcl->lpDDPalette = NULL;
    pnew_lcl->lpDDClipper = NULL;
    pnew_lcl->lpSurfMore->lpDDIClipper = NULL;
    pnew_lcl->dwModeCreatedIn = this_lcl->dwModeCreatedIn;
    pnew_lcl->dwBackBufferCount = 0;
    pnew_lcl->ddckCKDestBlt.dwColorSpaceLowValue = 0;
    pnew_lcl->ddckCKDestBlt.dwColorSpaceHighValue = 0;
    pnew_lcl->ddckCKSrcBlt.dwColorSpaceLowValue = 0;
    pnew_lcl->ddckCKSrcBlt.dwColorSpaceHighValue = 0;
    pnew_lcl->dwReserved1 = this_lcl->dwReserved1;

    /*
     * set up overlay specific data
     */
    if( this_lcl->dwFlags & DDRAWISURF_HASOVERLAYDATA )
    {
	pnew_lcl->ddckCKDestOverlay.dwColorSpaceLowValue = 0;
	pnew_lcl->ddckCKDestOverlay.dwColorSpaceHighValue = 0;
	pnew_lcl->ddckCKSrcOverlay.dwColorSpaceLowValue = 0;
	pnew_lcl->ddckCKSrcOverlay.dwColorSpaceHighValue = 0;
	pnew_lcl->lpSurfaceOverlaying = NULL;
	pnew_lcl->rcOverlaySrc.top = 0;
	pnew_lcl->rcOverlaySrc.left = 0;
	pnew_lcl->rcOverlaySrc.bottom = 0;
	pnew_lcl->rcOverlaySrc.right = 0;
	pnew_lcl->rcOverlayDest.top = 0;
	pnew_lcl->rcOverlayDest.left = 0;
	pnew_lcl->rcOverlayDest.bottom = 0;
	pnew_lcl->rcOverlayDest.right = 0;
	pnew_lcl->dwClrXparent = 0;
	pnew_lcl->dwAlpha = 0;

	/*
	 * if this is an overlay, link it in
	 */
	if( this_lcl->ddsCaps.dwCaps & DDSCAPS_OVERLAY )
	{
	    pnew_lcl->dbnOverlayNode.next = pdrv->dbnOverlayRoot.next;
	    pnew_lcl->dbnOverlayNode.prev = (LPVOID)(&(pdrv->dbnOverlayRoot));
	    pdrv->dbnOverlayRoot.next = (LPVOID)(&(pnew_lcl->dbnOverlayNode));
	    pnew_lcl->dbnOverlayNode.next->prev = (LPVOID)(&(pnew_lcl->dbnOverlayNode));
//	    pnew_lcl->dbnOverlayNode.object = pnew_int;
	}
    }
//.........这里部分代码省略.........
开发者ID:Gaikokujin,项目名称:WinNT4,代码行数:101,代码来源:ddsiunk.c


示例16: main

int main( int argc, char *argv[] )
{
    int         i;
    FILE        *f;
    int         rxflag;
    int         buff_stdin;
    int         ch;

    screenHeight = GetConsoleHeight();
    screenWidth = GetConsoleWidth();

    workBuff = MemAlloc( BUFF_SIZE );
    buff_stdin = 1;
    rxflag = 0;

    for( ;; ) {
        ch = GetOpt( &argc, argv, "#cftXp:n:", usageMsg );
        if( ch == -1 ) {
            break;
        }
        switch( ch ) {
        case 'c':
            clearScreen = 1;
            break;
        case 'f':
            foldLines = 0;
            break;
        case 't':
            buff_stdin = 0;
            break;
        case 'n':
            screenHeight = atoi( OptArg )+1;
            break;
        case 'p':
            promptString = strdup( OptA 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MemCopy函数代码示例发布时间:2022-05-30
下一篇:
C++ Melder_integer函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap