本文整理汇总了C++中Make函数的典型用法代码示例。如果您正苦于以下问题:C++ Make函数的具体用法?C++ Make怎么用?C++ Make使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了Make函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: modes
sk_sp<SkFlattenable> SkMergeImageFilter::CreateProc(SkReadBuffer& buffer) {
Common common;
if (!common.unflatten(buffer, -1)) {
return nullptr;
}
const int count = common.inputCount();
bool hasModes = buffer.readBool();
if (hasModes) {
SkAutoSTArray<4, SkXfermode::Mode> modes(count);
SkAutoSTArray<4, uint8_t> modes8(count);
if (!buffer.readByteArray(modes8.get(), count)) {
return nullptr;
}
for (int i = 0; i < count; ++i) {
modes[i] = (SkXfermode::Mode)modes8[i];
buffer.validate(SkIsValidMode(modes[i]));
}
if (!buffer.isValid()) {
return nullptr;
}
return Make(common.inputs(), count, modes.get(), &common.cropRect());
}
return Make(common.inputs(), count, nullptr, &common.cropRect());
}
开发者ID:alphan102,项目名称:gecko-dev,代码行数:25,代码来源:SkMergeImageFilter.cpp
示例2: main
int main()
{
Make('i', 'i');
Make('i', 'u');
Make('u', 'i');
Make('i', 'i');
}
开发者ID:CCJY,项目名称:coliru,代码行数:7,代码来源:main.cpp
示例3: TakeIt
TokenPtr SLScanner::ScanMinusOp()
{
std::string spell;
spell += TakeIt();
if (Is('-'))
return Make(Tokens::UnaryOp, spell, true);
else if (Is('='))
return Make(Tokens::AssignOp, spell, true);
return Make(Tokens::BinaryOp, spell);
}
开发者ID:LukasBanana,项目名称:HLSLTranslator,代码行数:12,代码来源:SLScanner.cpp
示例4: Make
void Make(int p,int u,int v,int c){
if (u==v) return;
if (level[u]>level[v]){
int k=g[father[u]][u];
w[k][p]=max(w[k][p],cost[k]-c);
Make(p,father[u],v,c);
}else{
int k=g[father[v]][v];
w[k][p]=max(w[k][p],cost[k]-c);
Make(p,u,father[v],c);
}
}
开发者ID:TRYang,项目名称:acm,代码行数:12,代码来源:sgu_206.cpp
示例5: Make
void Make(long l, long r, Set& s) {
if (l == r) {
long t = s.Value();
if (t > best)
ID = l, best = t;
return;
}
Set L, R;
long mid = (l + r) >> 1;
Add(s, L, l, mid);
Add(s, R, mid + 1, r);
Make(l, mid, R);
Make(mid + 1, r, L);
}
开发者ID:qscqesze,项目名称:acm-icpc,代码行数:14,代码来源:1961.cpp
示例6: MainLineIterate
static void MainLineIterate(typePos *Position)
{
int va, v2, cp;
uint32 m;
(Position->Dyn + 1)->move = MoveNone;
Mobility(Position);
if (!RobboTotalBaseScore(Position, &va))
{
if (VerboseRobboBases)
{
Send("info string Failure in MainLine\n");
#ifdef Log
if (WriteLog)
{
log_file = fopen(log_filename, "a");
fprintf(log_file, "info string Failure in MainLine\n");
close_log();
}
#endif
}
(Position->Dyn + 1)->move = MoveNone;
Position->StackHeight = 0;
return;
}
if (!RobboMove(Position, &m, &v2, &cp))
{
(Position->Dyn + 1)->move = MoveNone;
Position->StackHeight = 0;
return;
}
if (va == dDraw)
{
Position->StackHeight = 0;
Make(Position, m);
Position->StackHeight = 1;
Undo(Position, m);
return;
}
m &= 0x7fff;
Position->StackHeight = 0;
Make(Position, m);
Position->StackHeight = 1;
MainLineIterate(Position);
Undo(Position, m);
Position->StackHeight = 1;
}
开发者ID:Censor,项目名称:Firenzina,代码行数:48,代码来源:robbo_glue.c
示例7: Make
ArrayData* ProxyArray::SetInt(ArrayData* ad, int64_t k,
const Variant& v, bool copy) {
ad = copy ? Make(innerArr(ad)) : ad;
auto r = innerArr(ad)->set(k, v, innerArr(ad)->hasMultipleRefs());
assert(!copy);
return reseatable(ad, r);
}
开发者ID:aripringle,项目名称:hhvm,代码行数:7,代码来源:proxy-array.cpp
示例8: MakeForLocalSpace
sk_sp<SkFlattenable> SkPictureImageFilter::CreateProc(SkReadBuffer& buffer) {
sk_sp<SkPicture> picture;
SkRect cropRect;
if (buffer.isCrossProcess() && SkPicture::PictureIOSecurityPrecautionsEnabled()) {
buffer.validate(!buffer.readBool());
} else {
if (buffer.readBool()) {
picture = SkPicture::MakeFromBuffer(buffer);
}
}
buffer.readRect(&cropRect);
PictureResolution pictureResolution;
if (buffer.isVersionLT(SkReadBuffer::kPictureImageFilterResolution_Version)) {
pictureResolution = kDeviceSpace_PictureResolution;
} else {
pictureResolution = (PictureResolution)buffer.readInt();
}
if (kLocalSpace_PictureResolution == pictureResolution) {
//filterLevel is only serialized if pictureResolution is LocalSpace
SkFilterQuality filterQuality;
if (buffer.isVersionLT(SkReadBuffer::kPictureImageFilterLevel_Version)) {
filterQuality = kLow_SkFilterQuality;
} else {
filterQuality = (SkFilterQuality)buffer.readInt();
}
return MakeForLocalSpace(picture, cropRect, filterQuality);
}
return Make(picture, cropRect);
}
开发者ID:hxsong-GitHub,项目名称:skia,代码行数:31,代码来源:SkPictureImageFilter.cpp
示例9: SK_IMAGEFILTER_UNFLATTEN_COMMON
sk_sp<SkFlattenable> SkMatrixConvolutionImageFilter::CreateProc(SkReadBuffer& buffer) {
SK_IMAGEFILTER_UNFLATTEN_COMMON(common, 1);
SkISize kernelSize;
kernelSize.fWidth = buffer.readInt();
kernelSize.fHeight = buffer.readInt();
const int count = buffer.getArrayCount();
const int64_t kernelArea = sk_64_mul(kernelSize.width(), kernelSize.height());
if (!buffer.validate(kernelArea == count)) {
return nullptr;
}
SkAutoSTArray<16, SkScalar> kernel(count);
if (!buffer.readScalarArray(kernel.get(), count)) {
return nullptr;
}
SkScalar gain = buffer.readScalar();
SkScalar bias = buffer.readScalar();
SkIPoint kernelOffset;
kernelOffset.fX = buffer.readInt();
kernelOffset.fY = buffer.readInt();
TileMode tileMode = (TileMode)buffer.readInt();
bool convolveAlpha = buffer.readBool();
return Make(kernelSize, kernel.get(), gain, bias, kernelOffset, tileMode,
convolveAlpha, common.getInput(0), &common.cropRect());
}
开发者ID:alphan102,项目名称:gecko-dev,代码行数:25,代码来源:SkMatrixConvolutionImageFilter.cpp
示例10: Make
sk_sp<SkFlattenable> SkToSRGBColorFilter::CreateProc(SkReadBuffer& buffer) {
auto data = buffer.readByteArrayAsData();
if (data) {
return Make(SkColorSpace::Deserialize(data->data(), data->size()));
}
return nullptr;
}
开发者ID:molikto,项目名称:Skia,代码行数:7,代码来源:SkToSRGBColorFilter.cpp
示例11: Make
sk_sp<SkFont> SkFont::Testing_CreateFromPaint(const SkPaint& paint) {
uint32_t flags = 0;
if (paint.isVerticalText()) {
flags |= kVertical_Flag;
}
if (paint.isEmbeddedBitmapText()) {
flags |= kEmbeddedBitmaps_Flag;
}
if (paint.getFlags() & SkPaint::kGenA8FromLCD_Flag) {
flags |= kGenA8FromLCD_Flag;
}
if (paint.isFakeBoldText()) {
flags |= kEmbolden_Flag;
}
if (SkPaint::kFull_Hinting == paint.getHinting()) {
flags |= kEnableByteCodeHints_Flag;
}
if (paint.isAutohinted()) {
flags |= kEnableAutoHints_Flag;
}
if (paint.isSubpixelText() || paint.isLinearText()) {
// this is our default
} else {
flags |= kUseNonlinearMetrics_Flag;
}
MaskType maskType = SkFont::kBW_MaskType;
if (paint.isAntiAlias()) {
maskType = paint.isLCDRenderText() ? kLCD_MaskType : kA8_MaskType;
}
return Make(sk_ref_sp(paint.getTypeface()), paint.getTextSize(), paint.getTextScaleX(),
paint.getTextSkewX(), maskType, flags);
}
开发者ID:C-Tillion,项目名称:skia,代码行数:35,代码来源:SkFont.cpp
示例12: switch
int cPath::NextStep(int *px,int *py,int *cx,int *cy)
{
int move=CONTINUE;
switch(dir)
{
case D_N: (*py)-=STEP_LENGTH; break;
case D_S: (*py)+=STEP_LENGTH; break;
case D_E: (*px)+=STEP_LENGTH; break;
case D_O: (*px)-=STEP_LENGTH; break;
case D_NE:(*py)-=STEP_LENGTH; (*px)+=STEP_LENGTH; break;
case D_NO:(*py)-=STEP_LENGTH; (*px)-=STEP_LENGTH; break;
case D_SE:(*py)+=STEP_LENGTH; (*px)+=STEP_LENGTH; break;
case D_SO:(*py)+=STEP_LENGTH; (*px)-=STEP_LENGTH; break;
}
//Calculate next cell
if( (((*px)%32)==0) && (((*py)%32)==0))
{
x = (*px)>>5; *cx = x;
y = (*py)>>5; *cy = y;
if((nxf==-1) && (nyf==-1))
{
move=NextCell();
}
else//if((nxf>=0) || (nyf>=0))
{
AStar->EndPathfinder();
delete AStar;
AStar = NULL;
Make(world,*cx,*cy,nxf,nyf);
//move=CONTINUE;
}
}
开发者ID:marcelgozalbo,项目名称:MVJ2D,代码行数:35,代码来源:cPath.cpp
示例13: rde_ot_intern2
long int
rde_ot_intern2 (RDE_STATE p,
const char* operator,
Tcl_Obj* detail1,
Tcl_Obj* detail2)
{
long int id;
Tcl_DString buf;
TRACE (("rde_ot_intern2 (%p, '%s' %p = '%s', %p = '%s')", p, operator,
detail1, Tcl_GetString(detail1)
detail2, Tcl_GetString(detail2)));
if (IsCached (p, detail1, &id)) {
return id;
}
TRACE (("INTERNALIZE"));
/* Create a list of operator + detail1 + detail2.
* Using a DString.
*/
Tcl_DStringInit (&buf);
Tcl_DStringAppendElement (&buf, operator);
Tcl_DStringAppendElement (&buf, Tcl_GetString (detail1));
Tcl_DStringAppendElement (&buf, Tcl_GetString (detail2));
id = Make (p, detail1, Tcl_DStringValue (&buf));
Tcl_DStringFree (&buf);
return id;
}
开发者ID:EchoOfSoul,项目名称:tcllib,代码行数:32,代码来源:ot.c
示例14: ASSERT_VALID
void CUniformResourceLocator::Copy( const CUniversalNamingConvention& source )
{
ASSERT_VALID( this );
Empty();
ProtocolName = "file";
MachineName = source.ServerName;
PathName = source.ShareName;
PathName += "/";
PathName += source.PathName;
/*
** Now go through PathName to make sure it has /'s instead of \'s
*/
int location_of_slash = 0;
while( location_of_slash < PathName.GetLength() )
{
if ( PathName[ location_of_slash ] == '\\' )
{
PathName.SetAt( location_of_slash, '/' );
}
location_of_slash++;
}
Make();
}
开发者ID:DimeSPb,项目名称:ecuExplorer,代码行数:30,代码来源:CURL.CPP
示例15: PERFD
uint64 PERFD (typePOS* POSITION, int n)
{
int i;
uint64 TOTAL = 0, TIME;
typeMoveList LM[256], *lm;
DrawBoard (POSITION);
TIME = GetClock();
Mobility (POSITION);
if (IN_CHECK)
lm = EvasionMoves (POSITION, LM, 0xffffffffffffffff);
else
{
lm = CaptureMoves (POSITION, LM, POSITION->OccupiedBW);
lm = OrdinaryMoves (POSITION, lm);
}
for (i = 0; i < lm - LM; i++)
{
Make (POSITION, LM[i].move);
Mobility (POSITION);
if (!ILLEGAL)
{
printf ("%s ",Notate (LM[i].move, STRING1[POSITION->cpu]));
PERFT (POSITION, n - 1);
TOTAL += CNT[n - 1];
}
Undo (POSITION, LM[i].move);
}
printf ("TOTAL %lld moves %ld time: %lld us\n",
TOTAL, lm - LM, GetClock() - TIME);
return TOTAL;
}
开发者ID:Censor,项目名称:Ivanhoe,代码行数:31,代码来源:perft.c
示例16: Error
TokenPtr Scanner::ScanNumber()
{
if (!std::isdigit(UChr()))
Error("expected digit");
/* Take first number (literals like ".0" are not allowed) */
std::string spell;
const auto startChr = TakeIt();
spell += startChr;
/* Parse integer or floating-point number */
auto type = Token::Types::IntLiteral;
ScanDecimalLiteral(spell);
if (Is('.'))
{
spell += TakeIt();
if (std::isdigit(UChr()))
ScanDecimalLiteral(spell);
else
Error("floating-point literals must have a decimal on both sides of the dot (e.g. '0.0' but not '0.' or '.0')");
type = Token::Types::FloatLiteral;
}
if (std::isalpha(UChr()) || Is('.'))
ErrorLetterInNumber();
/* Create number token */
return Make(type, spell);
}
开发者ID:LukasBanana,项目名称:Abacus,代码行数:34,代码来源:Scanner.cpp
示例17: wxT
int FbImportZip::Save(bool progress)
{
m_id = m_database.Int(m_filename, wxT("SELECT id FROM archives WHERE file_name=?"));
wxString sql = m_id ?
wxT("UPDATE archives SET file_name=?,file_path=?,file_size=?,file_count=? WHERE id=?") :
wxT("INSERT INTO archives(file_name,file_path,file_size,file_count,id) VALUES (?,?,?,?,?)") ;
if (!m_id) m_id = - m_database.NewId(DB_NEW_ARCHIVE);
{
wxLongLong count = m_zip.GetTotalEntries();
FbSQLite3Statement stmt = m_database.PrepareStatement(sql);
stmt.Bind(1, m_filename);
stmt.Bind(2, m_filepath);
stmt.Bind(3, (wxLongLong)m_filesize);
stmt.Bind(4, count);
stmt.Bind(5, m_id);
stmt.ExecuteUpdate();
}
Make(progress);
return m_id;
}
开发者ID:EvgeniiFrolov,项目名称:myrulib,代码行数:25,代码来源:FbImportReader.cpp
示例18: main
int main(){
int i,j,k;
scanf("%d %d",&n,&m);
memset(g,0,sizeof(g));
memset(deg,0,sizeof(deg));
for (i=0;i<n*m>>1;i++){
scanf("%d %d",&j,&k);
g[j][k]=g[k][j]=1;
b[j][k]=b[k][j]=i+1;
deg[j]++;
deg[k]++;
}
memset(a,0,sizeof(a));
Make();
memset(from,-1,sizeof(from));
k=0;
for (i=1;i<=n;i++){
memset(tag,0,sizeof(tag));
if (dfs(i)) k++;
}
if (k<n) printf("NO\n");else{
printf("YES\n");
for (i=1;i<=n;i++) printf("%d\n",b[from[i]][i]);
}
return 0;
}
开发者ID:TRYang,项目名称:acm,代码行数:26,代码来源:sgu_286.cpp
示例19: Make
ArrayData*
ProxyArray::PlusEq(ArrayData* ad, const ArrayData* elems) {
auto const ret = ad->hasMultipleRefs() ? Make(innerArr(ad))
: asProxyArray(ad);
auto r = ret->m_ad->plusEq(elems);
return reseatable(ad, r);
}
开发者ID:BwRy,项目名称:hhvm,代码行数:7,代码来源:proxy-array.cpp
示例20: throw_string_too_large
StringData* StringData::Make(const char* data, size_t len, CopyStringMode) {
if (UNLIKELY(len > StringData::MaxSize)) {
throw_string_too_large(len);
}
return Make(StringSlice(data, len), CopyString);
}
开发者ID:huamichaelchen,项目名称:hhvm,代码行数:7,代码来源:string-data.cpp
注:本文中的Make函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论