• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ M_TRAILINGSPACE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中M_TRAILINGSPACE函数的典型用法代码示例。如果您正苦于以下问题:C++ M_TRAILINGSPACE函数的具体用法?C++ M_TRAILINGSPACE怎么用?C++ M_TRAILINGSPACE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了M_TRAILINGSPACE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: smb_rq_dmem

int
smb_rq_dmem(struct mbdata *mbp, const char *src, size_t size)
{
	struct mbuf *m;
	char * dst;
	int cplen, error;

	if (size == 0)
		return 0;
	m = mbp->mb_cur;
	if ((error = m_getm(m, size, &m)) != 0)
		return error;
	while (size > 0) {
		cplen = M_TRAILINGSPACE(m);
		if (cplen == 0) {
			m = m->m_next;
			continue;
		}
		if (cplen > (int)size)
			cplen = size;
		dst = mtod(m, char *) + m->m_len;
		nls_mem_toext(dst, src, cplen);
		size -= cplen;
		src += cplen;
		m->m_len += cplen;
		mbp->mb_count += cplen;
	}
	mbp->mb_pos = mtod(m, char *) + m->m_len;
	mbp->mb_cur = m;
	return 0;
}
开发者ID:AhmadTux,项目名称:DragonFlyBSD,代码行数:31,代码来源:rq.c


示例2: sbcreatecontrol

/*
 * Create a "control" mbuf containing the specified data with the specified
 * type for presentation on a socket buffer.
 */
struct mbuf *
sbcreatecontrol(caddr_t p, int size, int type, int level)
{
	struct cmsghdr *cp;
	struct mbuf *m;

	if (CMSG_SPACE((u_int)size) > MCLBYTES)
		return ((struct mbuf *) NULL);
	if (CMSG_SPACE((u_int)size) > MLEN)
		m = m_getcl(M_NOWAIT, MT_CONTROL, 0);
	else
		m = m_get(M_NOWAIT, MT_CONTROL);
	if (m == NULL)
		return ((struct mbuf *) NULL);
	cp = mtod(m, struct cmsghdr *);
	m->m_len = 0;
	KASSERT(CMSG_SPACE((u_int)size) <= M_TRAILINGSPACE(m),
	    ("sbcreatecontrol: short mbuf"));
	/*
	 * Don't leave the padding between the msg header and the
	 * cmsg data and the padding after the cmsg data un-initialized.
	 */
	bzero(cp, CMSG_SPACE((u_int)size));
	if (p != NULL)
		(void)memcpy(CMSG_DATA(cp), p, size);
	m->m_len = CMSG_SPACE(size);
	cp->cmsg_len = CMSG_LEN(size);
	cp->cmsg_level = level;
	cp->cmsg_type = type;
	return (m);
}
开发者ID:2asoft,项目名称:freebsd,代码行数:35,代码来源:uipc_sockbuf.c


示例3: mb_put_mem

int
mb_put_mem(struct mbdata *mbp, const char *source, size_t size)
{
	struct mbuf *m;
	char * dst;
	size_t cplen;
	int error;

	if (size == 0)
		return 0;
	m = mbp->mb_cur;
	if ((error = m_getm(m, size, &m)) != 0)
		return error;
	while (size > 0) {
		cplen = M_TRAILINGSPACE(m);
		if (cplen == 0) {
			m = m->m_next;
			continue;
		}
		if (cplen > size)
			cplen = size;
		dst = mtod(m, char *) + m->m_len;
		if (source) {
			bcopy(source, dst, cplen);
			source += cplen;
		} else
			bzero(dst, cplen);
		size -= cplen;
		m->m_len += cplen;
		mbp->mb_count += cplen;
	}
	mbp->mb_pos = mtod(m, char *) + m->m_len;
	mbp->mb_cur = m;
	return 0;
}
开发者ID:carriercomm,项目名称:fs-utils,代码行数:35,代码来源:mbuf.c


示例4: mb_initm

void
mb_initm(struct mbchain *mbp, struct mbuf *m)
{
	bzero(mbp, sizeof(*mbp));
	mbp->mb_top = mbp->mb_cur = m;
	mbp->mb_mleft = M_TRAILINGSPACE(m);
}
开发者ID:jaredmcneill,项目名称:freebsd,代码行数:7,代码来源:subr_mchain.c


示例5: sbcompress

/*
 * Append the data in mbuf chain (m) into the socket buffer sb following mbuf
 * (n).  If (n) is NULL, the buffer is presumed empty.
 *
 * When the data is compressed, mbufs in the chain may be handled in one of
 * three ways:
 *
 * (1) The mbuf may simply be dropped, if it contributes nothing (no data, no
 *     record boundary, and no change in data type).
 *
 * (2) The mbuf may be coalesced -- i.e., data in the mbuf may be copied into
 *     an mbuf already in the socket buffer.  This can occur if an
 *     appropriate mbuf exists, there is room, and no merging of data types
 *     will occur.
 *
 * (3) The mbuf may be appended to the end of the existing mbuf chain.
 *
 * If any of the new mbufs is marked as M_EOR, mark the last mbuf appended as
 * end-of-record.
 */
void
sbcompress(struct sockbuf *sb, struct mbuf *m, struct mbuf *n)
{
	int eor = 0;
	struct mbuf *o;

	SOCKBUF_LOCK_ASSERT(sb);

	while (m) {
		eor |= m->m_flags & M_EOR;
		if (m->m_len == 0 &&
		    (eor == 0 ||
		     (((o = m->m_next) || (o = n)) &&
		      o->m_type == m->m_type))) {
			if (sb->sb_lastrecord == m)
				sb->sb_lastrecord = m->m_next;
			m = m_free(m);
			continue;
		}
		if (n && (n->m_flags & M_EOR) == 0 &&
		    M_WRITABLE(n) &&
		    ((sb->sb_flags & SB_NOCOALESCE) == 0) &&
		    m->m_len <= M_TRAILINGSPACE(n) &&
		    n->m_type == m->m_type) {
			if (n->m_flags & M_HOLE) {
				n->m_len += m->m_len;
				sb->sb_cc += m->m_len;
				m = m_free(m);
				continue;
			} else if (m->m_len <= MCLBYTES / 4) { /* XXX: Don't copy too much */
				bcopy(mtod(m, caddr_t),
				      mtod(n, caddr_t) + n->m_len,
				      (unsigned)m->m_len);
				n->m_len += m->m_len;
				sb->sb_cc += m->m_len;
				if (m->m_type != MT_DATA &&
				    m->m_type != MT_OOBDATA)
				/* XXX: Probably don't need.*/
					sb->sb_ctl += m->m_len;
				m = m_free(m);
				continue;
			}
		}
		if (n)
			n->m_next = m;
		else
			sb->sb_mb = m;
		sb->sb_mbtail = m;
		sballoc(sb, m);
		n = m;
		m->m_flags &= ~M_EOR;
		m = m->m_next;
		n->m_next = 0;
	}
	if (eor) {
		KASSERT(n != NULL, ("sbcompress: eor && n == NULL"));
		n->m_flags |= eor;
	}
	SBLASTMBUFCHK(sb);
}
开发者ID:bigclouds,项目名称:libuinet,代码行数:80,代码来源:uipc_sockbuf.c


示例6: sbcreatecontrol

/*
 * Create a "control" mbuf containing the specified data with the specified
 * type for presentation on a socket buffer.
 */
struct mbuf *
sbcreatecontrol(caddr_t p, int size, int type, int level)
{
	struct cmsghdr *cp;
	struct mbuf *m;

	if (CMSG_SPACE((u_int)size) > MCLBYTES)
		return ((struct mbuf *) NULL);
	if (CMSG_SPACE((u_int)size) > MLEN)
		m = m_getcl(M_DONTWAIT, MT_CONTROL, 0);
	else
		m = m_get(M_DONTWAIT, MT_CONTROL);
	if (m == NULL)
		return ((struct mbuf *) NULL);
	cp = mtod(m, struct cmsghdr *);
	m->m_len = 0;
	KASSERT(CMSG_SPACE((u_int)size) <= M_TRAILINGSPACE(m),
	    ("sbcreatecontrol: short mbuf"));
	if (p != NULL)
		(void)memcpy(CMSG_DATA(cp), p, size);
	m->m_len = CMSG_SPACE(size);
	cp->cmsg_len = CMSG_LEN(size);
	cp->cmsg_level = level;
	cp->cmsg_type = type;
	return (m);
}
开发者ID:Pieter-was,项目名称:osv,代码行数:30,代码来源:uipc_sockbuf.c


示例7: m_collapse

/*
 * Defragment an mbuf chain, returning at most maxfrags separate
 * mbufs+clusters.  If this is not possible NULL is returned and
 * the original mbuf chain is left in it's present (potentially
 * modified) state.  We use two techniques: collapsing consecutive
 * mbufs and replacing consecutive mbufs by a cluster.
 *
 * NB: this should really be named m_defrag but that name is taken
 */
struct mbuf *
m_collapse(struct mbuf *m0, int how, int maxfrags)
{
	struct mbuf *m, *n, *n2, **prev;
	u_int curfrags;

	/*
	 * Calculate the current number of frags.
	 */
	curfrags = 0;
	for (m = m0; m != NULL; m = m->m_next)
		curfrags++;
	/*
	 * First, try to collapse mbufs.  Note that we always collapse
	 * towards the front so we don't need to deal with moving the
	 * pkthdr.  This may be suboptimal if the first mbuf has much
	 * less data than the following.
	 */
	m = m0;
again:
	for (;;) {
		n = m->m_next;
		if (n == NULL)
			break;
		if (M_WRITABLE(m) &&
		    n->m_len < M_TRAILINGSPACE(m)) {
			bcopy(mtod(n, void *), mtod(m, char *) + m->m_len,
				n->m_len);
			m->m_len += n->m_len;
			m->m_next = n->m_next;
			m_free(n);
			if (--curfrags <= maxfrags)
				return m0;
		} else
开发者ID:vocho,项目名称:freebsd-base-graphics,代码行数:43,代码来源:uipc_mbuf.c


示例8: m_megapullup

m_megapullup(PNATState pData, struct mbuf *m, int len)
#endif
{
    struct mbuf *mcl;

    if (len > m->m_pkthdr.len)
        goto bad;

    /* Do not reallocate packet if it is sequentional,
     * writable and has some extra space for expansion.
     * XXX: Constant 100bytes is completely empirical. */
#define RESERVE 100
    if (m->m_next == NULL && M_WRITABLE(m) && M_TRAILINGSPACE(m) >= RESERVE)
        return (m);

    if (len <= MCLBYTES - RESERVE) {
#ifndef VBOX
        mcl = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
#else
        mcl = m_getcl(pData, M_DONTWAIT, MT_DATA, M_PKTHDR);
#endif
    } else if (len < MJUM16BYTES) {
        int size;
        if (len <= MJUMPAGESIZE - RESERVE) {
            size = MJUMPAGESIZE;
        } else if (len <= MJUM9BYTES - RESERVE) {
            size = MJUM9BYTES;
        } else {
            size = MJUM16BYTES;
        };
#ifndef VBOX
        mcl = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, size);
#else
        mcl = m_getjcl(pData, M_DONTWAIT, MT_DATA, M_PKTHDR, size);
#endif
    } else {
        goto bad;
    }
    if (mcl == NULL)
        goto bad;

    m_move_pkthdr(mcl, m);
    m_copydata(m, 0, len, mtod(mcl, caddr_t));
    mcl->m_len = mcl->m_pkthdr.len = len;
#ifndef VBOX
    m_freem(m);
#else
    m_freem(pData, m);
#endif

    return (mcl);
bad:
#ifndef VBOX
    m_freem(m);
#else
    m_freem(pData, m);
#endif
    return (NULL);
}
开发者ID:MadHacker217,项目名称:VirtualBox-OSE,代码行数:59,代码来源:alias.c


示例9: mb_put_mem

int
mb_put_mem(struct mbchain *mbp, c_caddr_t source, int size, int type)
{
	struct mbuf *m;
	caddr_t dst;
	c_caddr_t src;
	int cplen, error, mleft, count;
	size_t srclen, dstlen;

	m = mbp->mb_cur;
	mleft = mbp->mb_mleft;

	while (size > 0) {
		if (mleft == 0) {
			if (m->m_next == NULL)
				m = m_getm(m, size, M_WAIT, MT_DATA);
			else
				m = m->m_next;
			mleft = M_TRAILINGSPACE(m);
			continue;
		}
		cplen = mleft > size ? size : mleft;
		srclen = dstlen = cplen;
		dst = mtod(m, caddr_t) + m->m_len;
		switch (type) {
		    case MB_MCUSTOM:
			srclen = size;
			dstlen = mleft;
			error = mbp->mb_copy(mbp, source, dst, &srclen, &dstlen);
			if (error)
				return error;
			break;
		    case MB_MINLINE:
			for (src = source, count = cplen; count; count--)
				*dst++ = *src++;
			break;
		    case MB_MSYSTEM:
			bcopy(source, dst, cplen);
			break;
		    case MB_MUSER:
			error = copyin(source, dst, cplen);
			if (error)
				return error;
			break;
		    case MB_MZERO:
			bzero(dst, cplen);
			break;
		}
		size -= srclen;
		source += srclen;
		m->m_len += dstlen;
		mleft -= dstlen;
		mbp->mb_count += dstlen;
	}
	mbp->mb_cur = m;
	mbp->mb_mleft = mleft;
	return 0;
}
开发者ID:BillTheBest,项目名称:libuinet,代码行数:58,代码来源:subr_mchain.c


示例10: mb_put_mbuf

int
mb_put_mbuf(struct mbchain *mbp, struct mbuf *m)
{
	mbp->mb_cur->m_next = m;
	while (m) {
		mbp->mb_count += m->m_len;
		if (m->m_next == NULL)
			break;
		m = m->m_next;
	}
	mbp->mb_mleft = M_TRAILINGSPACE(m);
	mbp->mb_cur = m;
	return 0;
}
开发者ID:BillTheBest,项目名称:libuinet,代码行数:14,代码来源:subr_mchain.c


示例11: sbcompress

/*
 * Compress mbuf chain m into the socket
 * buffer sb following mbuf n.  If n
 * is null, the buffer is presumed empty.
 */
void
sbcompress(struct sockbuf *sb, struct mbuf *m, struct mbuf *n)
{
	int eor = 0;
	struct mbuf *o;

	while (m) {
		eor |= m->m_flags & M_EOR;
		if (m->m_len == 0 &&
		    (eor == 0 ||
		    (((o = m->m_next) || (o = n)) &&
		    o->m_type == m->m_type))) {
			if (sb->sb_lastrecord == m)
				sb->sb_lastrecord = m->m_next;
			m = m_free(m);
			continue;
		}
		if (n && (n->m_flags & M_EOR) == 0 &&
		    /* M_TRAILINGSPACE() checks buffer writeability */
		    m->m_len <= MCLBYTES / 4 && /* XXX Don't copy too much */
		    m->m_len <= M_TRAILINGSPACE(n) &&
		    n->m_type == m->m_type) {
			memcpy(mtod(n, caddr_t) + n->m_len, mtod(m, caddr_t),
			    m->m_len);
			n->m_len += m->m_len;
			sb->sb_cc += m->m_len;
			if (m->m_type != MT_CONTROL && m->m_type != MT_SONAME)
				sb->sb_datacc += m->m_len;
			m = m_free(m);
			continue;
		}
		if (n)
			n->m_next = m;
		else
			sb->sb_mb = m;
		sb->sb_mbtail = m;
		sballoc(sb, m);
		n = m;
		m->m_flags &= ~M_EOR;
		m = m->m_next;
		n->m_next = NULL;
	}
	if (eor) {
		if (n)
			n->m_flags |= eor;
		else
			printf("semi-panic: sbcompress");
	}
	SBLASTMBUFCHK(sb, __func__);
}
开发者ID:ajinkya93,项目名称:OpenBSD,代码行数:55,代码来源:uipc_socket2.c


示例12: pppwrite

/*
 * Line specific (tty) write routine.
 */
int
pppwrite(struct rtems_termios_tty *tty, rtems_libio_rw_args_t *rw_args)
{
    struct sockaddr               dst;
    int                           n;
    int                           len;
    int                           maximum    = rw_args->count;
    char                         *out_buffer = rw_args->buffer; 
    register struct ppp_softc    *sc         = (struct ppp_softc *)tty->t_sc;
    struct mbuf                  *m;
    struct mbuf                  *m0;
    struct mbuf                 **mp;

    rtems_bsdnet_semaphore_obtain();
    for (mp = &m0; maximum; mp = &m->m_next) {
	MGET(m, M_WAIT, MT_DATA);
	if ((*mp = m) == NULL) {
	    m_freem(m0);
	    return (ENOBUFS);
	}
	m->m_len = 0;
	if (maximum >= MCLBYTES / 2) {
	    MCLGET(m, M_DONTWAIT);
        }
	len = M_TRAILINGSPACE(m);
	if (len > maximum) {
          memcpy(mtod(m, u_char *),out_buffer,maximum);
          m->m_len = maximum;
          maximum  = 0;
        }
        else {
          memcpy(mtod(m, u_char *),out_buffer,len);
          m->m_len    = len;
          maximum    -= len;
          out_buffer += len;
        }
    }

    dst.sa_family = AF_UNSPEC;
    bcopy(mtod(m0, u_char *), dst.sa_data, PPP_HDRLEN);
    m0->m_data += PPP_HDRLEN;
    m0->m_len  -= PPP_HDRLEN;

    n = pppoutput(&sc->sc_if, m0, &dst, (struct rtentry *)0);
    rtems_bsdnet_semaphore_release();

    return ( n );
}
开发者ID:FullMentalPanic,项目名称:RTEMS_NEW_TOOL_CHAIN,代码行数:51,代码来源:ppp_tty.c


示例13: m_copyback

/*
 * Copy data from a buffer back into the indicated mbuf chain,
 * starting "off" bytes from the beginning, extending the mbuf
 * chain if necessary.
 */
void
m_copyback(struct mbuf *m0, int off, int len, c_caddr_t cp)
{
	int mlen;
	struct mbuf *m = m0, *n;
	int totlen = 0;

	if (m0 == NULL)
		return;
	while (off > (mlen = m->m_len)) {
		off -= mlen;
		totlen += mlen;
		if (m->m_next == NULL) {
			n = m_get(M_NOWAIT, m->m_type);
			if (n == NULL)
				goto out;
			bzero(mtod(n, caddr_t), MLEN);
			n->m_len = min(MLEN, len + off);
			m->m_next = n;
		}
		m = m->m_next;
	}
	while (len > 0) {
		if (m->m_next == NULL && (len > m->m_len - off)) {
			m->m_len += min(len - (m->m_len - off),
			    M_TRAILINGSPACE(m));
		}
		mlen = min (m->m_len - off, len);
		bcopy(cp, off + mtod(m, caddr_t), (u_int)mlen);
		cp += mlen;
		len -= mlen;
		mlen += off;
		off = 0;
		totlen += mlen;
		if (len == 0)
			break;
		if (m->m_next == NULL) {
			n = m_get(M_NOWAIT, m->m_type);
			if (n == NULL)
				break;
			n->m_len = min(MLEN, len);
			m->m_next = n;
		}
		m = m->m_next;
	}
out:	if (((m = m0)->m_flags & M_PKTHDR) && (m->m_pkthdr.len < totlen))
		m->m_pkthdr.len = totlen;
}
开发者ID:cleveritcz,项目名称:f-stack,代码行数:53,代码来源:uipc_mbuf.c


示例14: m_cat

/*
 * Concatenate mbuf chain n to m.
 * n might be copied into m (when n->m_len is small), therefore data portion of
 * n could be copied into an mbuf of different mbuf type.
 * Therefore both chains should be of the same type (e.g. MT_DATA).
 * Any m_pkthdr is not updated.
 */
void
m_cat(struct mbuf *m, struct mbuf *n)
{
	while (m->m_next)
		m = m->m_next;
	while (n) {
		if (M_READONLY(m) || n->m_len > M_TRAILINGSPACE(m)) {
			/* just join the two chains */
			m->m_next = n;
			return;
		}
		/* splat the data from one into the other */
		memcpy(mtod(m, caddr_t) + m->m_len, mtod(n, caddr_t),
		    n->m_len);
		m->m_len += n->m_len;
		n = m_free(n);
	}
}
开发者ID:orumin,项目名称:openbsd-efivars,代码行数:25,代码来源:uipc_mbuf.c


示例15: vte_encap

struct vte_txdesc *
vte_encap(struct vte_softc *sc, struct mbuf **m_head)
{
	struct vte_txdesc *txd;
	struct mbuf *m, *n;
	int copy, error, padlen;

	txd = &sc->vte_cdata.vte_txdesc[sc->vte_cdata.vte_tx_prod];
	m = *m_head;
	/*
	 * Controller doesn't auto-pad, so we have to make sure pad
	 * short frames out to the minimum frame length.
	 */
	if (m->m_pkthdr.len < VTE_MIN_FRAMELEN)
		padlen = VTE_MIN_FRAMELEN - m->m_pkthdr.len;
	else
		padlen = 0;

	/*
	 * Controller does not support multi-fragmented TX buffers.
	 * Controller spends most of its TX processing time in
	 * de-fragmenting TX buffers.  Either faster CPU or more
	 * advanced controller DMA engine is required to speed up
	 * TX path processing.
	 * To mitigate the de-fragmenting issue, perform deep copy
	 * from fragmented mbuf chains to a pre-allocated mbuf
	 * cluster with extra cost of kernel memory.  For frames
	 * that is composed of single TX buffer, the deep copy is
	 * bypassed.
	 */
	copy = 0;
	if (m->m_next != NULL)
		copy++;
	if (padlen > 0 && (padlen > M_TRAILINGSPACE(m)))
		copy++;
	if (copy != 0) {
		/* Avoid expensive m_defrag(9) and do deep copy. */
		n = sc->vte_cdata.vte_txmbufs[sc->vte_cdata.vte_tx_prod];
		m_copydata(m, 0, m->m_pkthdr.len, mtod(n, char *));
		n->m_pkthdr.len = m->m_pkthdr.len;
		n->m_len = m->m_pkthdr.len;
		m = n;
		txd->tx_flags |= VTE_TXMBUF;
	}
开发者ID:orumin,项目名称:openbsd-efivars,代码行数:44,代码来源:if_vte.c


示例16: sbcompress

/*
 * Compress mbuf chain m into the socket
 * buffer sb following mbuf n.  If n
 * is null, the buffer is presumed empty.
 */
void
sbcompress(struct sockbuf *sb, struct mbuf *m, struct mbuf *n)
{
	int		eor;
	struct mbuf	*o;

	KASSERT(solocked(sb->sb_so));

	eor = 0;
	while (m) {
		eor |= m->m_flags & M_EOR;
		if (m->m_len == 0 &&
		    (eor == 0 ||
		     (((o = m->m_next) || (o = n)) &&
		      o->m_type == m->m_type))) {
			if (sb->sb_lastrecord == m)
				sb->sb_lastrecord = m->m_next;
			m = m_free(m);
			continue;
		}
		if (n && (n->m_flags & M_EOR) == 0 &&
		    /* M_TRAILINGSPACE() checks buffer writeability */
		    m->m_len <= MCLBYTES / 4 && /* XXX Don't copy too much */
		    m->m_len <= M_TRAILINGSPACE(n) &&
		    n->m_type == m->m_type) {
			memcpy(mtod(n, char *) + n->m_len, mtod(m, void *),
			    (unsigned)m->m_len);
			n->m_len += m->m_len;
			sb->sb_cc += m->m_len;
			m = m_free(m);
			continue;
		}
		if (n)
			n->m_next = m;
		else
			sb->sb_mb = m;
		sb->sb_mbtail = m;
		sballoc(sb, m);
		n = m;
		m->m_flags &= ~M_EOR;
		m = m->m_next;
		n->m_next = 0;
	}
开发者ID:bigclouds,项目名称:netbsd_dpdk_port,代码行数:48,代码来源:uipc_socket2.c


示例17: m_cat

/*
 * Concatenate mbuf chain n to m.
 * Both chains must be of the same type (e.g. MT_DATA).
 * Any m_pkthdr is not updated.
 */
void
m_cat(struct mbuf *m, struct mbuf *n)
{
	while (m->m_next)
		m = m->m_next;
	while (n) {
		if (!M_WRITABLE(m) ||
		    M_TRAILINGSPACE(m) < n->m_len) {
			/* just join the two chains */
			m->m_next = n;
			return;
		}
		/* splat the data from one into the other */
		bcopy(mtod(n, caddr_t), mtod(m, caddr_t) + m->m_len,
		    (u_int)n->m_len);
		m->m_len += n->m_len;
		n = m_free(n);
	}
}
开发者ID:cleveritcz,项目名称:f-stack,代码行数:24,代码来源:uipc_mbuf.c


示例18: mb_fixhdr

/*
int
mb_fixhdr(struct mbdata *mbp)
{
	struct mbuf *m = mbp->mb_top;
	int len = 0;

	while (m) {
		len += m->m_len;
		m = m->m_next;
	}
	mbp->mb_top->m_pkthdr.len = len;
	return len;
}
*/
int
m_getm(struct mbuf *top, size_t len, struct mbuf **mpp)
{
	struct mbuf *m, *mp;
	int error;
	
	for (mp = top; ; mp = mp->m_next) {
		len -= M_TRAILINGSPACE(mp);
		if (mp->m_next == NULL)
			break;
		
	}
	if (len > 0) {
		if ((error = m_get(len, &m)) != 0)
			return error;
		mp->m_next = m;
	}
	*mpp = top;
	return 0;
}
开发者ID:carriercomm,项目名称:fs-utils,代码行数:35,代码来源:mbuf.c


示例19: nfsm_build_xx

void *
nfsm_build_xx(int s, struct mbuf **mb, caddr_t *bpos)
{
	struct mbuf *mb2;
	void *ret;

	if (s > M_TRAILINGSPACE(*mb)) {
		mb2 = m_get(M_WAITOK, MT_DATA);
		if (s > MLEN)
			panic("build > MLEN");
		(*mb)->m_next = mb2;
		*mb = mb2;
		(*mb)->m_len = 0;
		*bpos = mtod(*mb, caddr_t);
	}
	ret = *bpos;
	(*mb)->m_len += s;
	*bpos += s;
	return (ret);
}
开发者ID:coyizumi,项目名称:cs111,代码行数:20,代码来源:nfs_common.c


示例20: mb_fit

/*
 * Check if object of size 'size' fit to the current position and
 * allocate new mbuf if not. Advance pointers and increase length of mbuf(s).
 * Return pointer to the object placeholder or NULL if any error occured.
 */
int
mb_fit(struct mbdata *mbp, size_t size, void **pp)
{
	struct mbuf *m, *mn;
	int error;

	m = mbp->mb_cur;
	if (M_TRAILINGSPACE(m) < (int)size) {
		if ((error = m_get(size, &mn)) != 0)
			return error;
		mbp->mb_pos = mtod(mn, char *);
		mbp->mb_cur = m->m_next = mn;
		m = mn;
	}
	m->m_len += size;
	*pp = mbp->mb_pos;
	mbp->mb_pos += size;
	mbp->mb_count += size;
	return 0;
}
开发者ID:carriercomm,项目名称:fs-utils,代码行数:25,代码来源:mbuf.c



注:本文中的M_TRAILINGSPACE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ M_get_stack_var函数代码示例发布时间:2022-05-30
下一篇:
C++ M_RES函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap