本文整理汇总了C++中M_GetText函数的典型用法代码示例。如果您正苦于以下问题:C++ M_GetText函数的具体用法?C++ M_GetText怎么用?C++ M_GetText使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了M_GetText函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: UnregisterServer
void UnregisterServer(void)
{
if (con_state != MSCS_REGISTERED)
{
con_state = MSCS_NONE;
CloseConnection();
return;
}
con_state = MSCS_NONE;
CONS_Printf("%s", M_GetText("Unregistering this server to the master server...\n"));
if (MS_Connect(registered_server.ip, registered_server.port, 0))
{
CONS_Printf("%s", M_GetText("cannot connect to the master server\n"));
return;
}
if (RemoveFromMasterSever() < 0)
CONS_Printf("%s", M_GetText("cannot remove this server from the master server\n"));
CloseConnection();
MSCloseUDPSocket();
MSLastPing = 0;
}
开发者ID:Logan-A,项目名称:SRB2-Public,代码行数:26,代码来源:mserv.c
示例2: CONS_Printf
const char *GetMODVersion(void)
{
static msg_t msg;
// we must be connected to the master server before writing to it
if (MS_Connect(GetMasterServerIP(), GetMasterServerPort(), 0))
{
CONS_Printf("%s", M_GetText("cannot connect to the master server\n"));
M_StartMessage(M_GetText("There was a problem connecting to\nthe Master Server"), NULL, MM_NOTHING);
return NULL;
}
msg.type = GET_VERSION_MSG;
msg.length = sizeof MODVERSION;
msg.room = MODID; // Might as well use it for something.
sprintf(msg.buffer,"%d",MODVERSION);
if (MS_Write(&msg) < 0)
return NULL;
MS_Read(&msg);
CloseConnection();
if(strcmp(msg.buffer,"NULL") != 0)
{
return msg.buffer;
}
else
return NULL;
}
开发者ID:Logan-A,项目名称:SRB2-Public,代码行数:30,代码来源:mserv.c
示例3: SCR_CheckDefaultMode
void SCR_CheckDefaultMode(void)
{
INT32 scr_forcex, scr_forcey; // resolution asked from the cmd-line
if (dedicated)
return;
// 0 means not set at the cmd-line
scr_forcex = scr_forcey = 0;
if (M_CheckParm("-width") && M_IsNextParm())
scr_forcex = atoi(M_GetNextParm());
if (M_CheckParm("-height") && M_IsNextParm())
scr_forcey = atoi(M_GetNextParm());
if (scr_forcex && scr_forcey)
{
CONS_Printf(M_GetText("Using resolution: %d x %d\n"), scr_forcex, scr_forcey);
// returns -1 if not found, thus will be 0 (no mode change) if not found
setmodeneeded = VID_GetModeForSize(scr_forcex, scr_forcey) + 1;
}
else
{
CONS_Printf(M_GetText("Default resolution: %d x %d (%d bits)\n"), cv_scr_width.value,
cv_scr_height.value, cv_scr_depth.value);
// see note above
setmodeneeded = VID_GetModeForSize(cv_scr_width.value, cv_scr_height.value) + 1;
}
}
开发者ID:TehRealSalt,项目名称:SRB2,代码行数:30,代码来源:screen.c
示例4: COM_Exec_f
/** Executes a script file.
*/
static void COM_Exec_f(void)
{
UINT8 *buf = NULL;
if (COM_Argc() < 2 || COM_Argc() > 3)
{
CONS_Printf(M_GetText("exec <filename>: run a script file\n"));
return;
}
// load file
FIL_ReadFile(COM_Argv(1), &buf);
if (!buf)
{
if (!COM_CheckParm("-noerror"))
CONS_Printf(M_GetText("couldn't execute file %s\n"), COM_Argv(1));
return;
}
if (!COM_CheckParm("-silent"))
CONS_Printf(M_GetText("executing %s\n"), COM_Argv(1));
// insert text file into the command buffer
COM_BufAddText((char *)buf);
COM_BufAddText("\n");
// free buffer
Z_Free(buf);
}
开发者ID:RedEnchilada,项目名称:SRB2,代码行数:32,代码来源:command.c
示例5: COM_Toggle_f
/** Toggles a console variable. Useful for on/off values.
*
* This works on on/off, yes/no values only
*/
static void COM_Toggle_f(void)
{
consvar_t *cvar;
if (COM_Argc() != 2)
{
CONS_Printf(M_GetText("Toggle <cvar_name>: Toggle the value of a cvar\n"));
return;
}
cvar = CV_FindVar(COM_Argv(1));
if (!cvar)
{
CONS_Alert(CONS_NOTICE, M_GetText("%s is not a cvar\n"), COM_Argv(1));
return;
}
if (!(cvar->PossibleValue == CV_YesNo || cvar->PossibleValue == CV_OnOff))
{
CONS_Alert(CONS_NOTICE, M_GetText("%s is not a boolean value\n"), COM_Argv(1));
return;
}
// netcvar don't change imediately
cvar->flags |= CV_SHOWMODIFONETIME;
CV_AddValue(cvar, +1);
}
开发者ID:RedEnchilada,项目名称:SRB2,代码行数:30,代码来源:command.c
示例6: CDAudio_GetAudioDiskInfo
/**************************************************************************
*
* function: CDAudio_GetAudioDiskInfo
*
* description:
* set number of tracks if CD is available
*
**************************************************************************/
static INT32 CDAudio_GetAudioDiskInfo(void)
{
cdValid = SDL_FALSE;
maxTrack = 0;
if (!cdrom)
return 0;//Alam: Lies!
cdStatus = SDL_CDStatus(cdrom);
if (!CD_INDRIVE(cdStatus))
{
CONS_Printf("%s", M_GetText("No CD in drive\n"));
return -1;
}
if (cdStatus == CD_ERROR)
{
CONS_Printf(M_GetText("CD Error: %s\n"), SDL_GetError());
return -1;
}
cdValid = SDL_TRUE;
maxTrack = (Uint8)cdrom->numtracks;
return 0;
}
开发者ID:ZilverXZX,项目名称:SRB2,代码行数:35,代码来源:i_cdmus.c
示例7: Command_Ping_f
void Command_Ping_f(void)
{
#ifndef NEWPING
if(server)
{
#endif
INT32 i;
for (i = 0; i < MAXPLAYERS;i++)
{
#ifndef NEWPING
const INT32 node = playernode[i];
if (playeringame[i] && node != 0)
CONS_Printf(M_GetText("%.2d : %s\n %d tics, %d ms.\n"), i, player_names[i],
GetLag(node), G_TicsToMilliseconds(GetLag(node)));
#else
if (playeringame[i] && i != 0)
CONS_Printf(M_GetText("%.2d : %s\n %d ms\n"), i, player_names[i], playerpingtable[i]);
#endif
}
#ifndef NEWPING
}
else
CONS_Printf(M_GetText("Only the server can use this.\n"));
#endif
}
开发者ID:HipsterLion,项目名称:SRB2,代码行数:25,代码来源:d_net.c
示例8: Command_CountMobjs_f
void Command_CountMobjs_f(void)
{
thinker_t *th;
mobjtype_t i;
INT32 count;
if (gamestate != GS_LEVEL)
{
CONS_Printf(M_GetText("You must be in a level to use this.\n"));
return;
}
if (COM_Argc() >= 2)
{
size_t j;
for (j = 1; j < COM_Argc(); j++)
{
i = atoi(COM_Argv(j));
if (i >= NUMMOBJTYPES)
{
CONS_Printf(M_GetText("Object number %d out of range (max %d).\n"), i, NUMMOBJTYPES-1);
continue;
}
count = 0;
for (th = thinkercap.next; th != &thinkercap; th = th->next)
{
if (th->function.acp1 != (actionf_p1)P_MobjThinker)
continue;
if (((mobj_t *)th)->type == i)
count++;
}
CONS_Printf(M_GetText("There are %d objects of type %d currently in the level.\n"), count, i);
}
return;
}
CONS_Printf(M_GetText("Count of active objects in level:\n"));
for (i = 0; i < NUMMOBJTYPES; i++)
{
count = 0;
for (th = thinkercap.next; th != &thinkercap; th = th->next)
{
if (th->function.acp1 != (actionf_p1)P_MobjThinker)
continue;
if (((mobj_t *)th)->type == i)
count++;
}
CONS_Printf(" * %d: %d\n", i, count);
}
}
开发者ID:ZilverXZX,项目名称:SRB2,代码行数:58,代码来源:p_tick.c
示例9: I_InitCD
// --------
// I_InitCD
// Init CD Audio subsystem
// --------
void I_InitCD(void)
{
MCI_SET_PARMS mciSet;
MCIERROR iErr;
int i;
// We don't have an open device yet
m_MCIOpen.wDeviceID = 0;
m_nTracksCount = 0;
cdaudio_started = false;
m_MCIOpen.lpstrDeviceType = (LPCTSTR)MCI_DEVTYPE_CD_AUDIO;
iErr = mciSendCommand(0, MCI_OPEN, MCI_OPEN_TYPE|MCI_OPEN_TYPE_ID, (DWORD_PTR)&m_MCIOpen);
if (iErr)
{
MCIErrorMessageBox (iErr);
return;
}
// Set the time format to track/minute/second/frame (TMSF).
mciSet.dwTimeFormat = MCI_FORMAT_TMSF;
iErr = mciSendCommand(m_MCIOpen.wDeviceID, MCI_SET, MCI_SET_TIME_FORMAT, (DWORD_PTR)&mciSet);
if (iErr)
{
MCIErrorMessageBox (iErr);
mciSendCommand(m_MCIOpen.wDeviceID, MCI_CLOSE, 0, 0);
return;
}
I_AddExitFunc (I_ShutdownCD);
cdaudio_started = true;
CONS_Printf (M_GetText("CD audio Initialized\n"));
// last saved in config.cfg
i = cd_volume.value;
//I_SetVolumeCD (0); // initialize to 0 for some odd cd drivers
I_SetVolumeCD (i); // now set the last saved volume
for (i = 0; i < MAX_CD_TRACKS; i++)
cdRemap[i] = (UINT8)i;
if (!CD_ReadTrackInfo())
{
CONS_Printf(M_GetText("No CD in drive\n"));
cdEnabled = FALSE;
cdValid = FALSE;
}
else
{
cdEnabled = TRUE;
cdValid = TRUE;
}
COM_AddCommand ("cd", Command_Cd_f);
}
开发者ID:HipsterLion,项目名称:SRB2,代码行数:61,代码来源:win_cd.c
示例10: LUA_DumpFile
// Compile a script by name and dump it back to disk.
void LUA_DumpFile(const char *filename)
{
FILE *handle;
char filenamebuf[MAX_WADPATH];
if (!gL) // Lua needs to be initialized
LUA_ClearState(false);
// find the file the SRB2 way
strncpy(filenamebuf, filename, MAX_WADPATH);
filenamebuf[MAX_WADPATH - 1] = '\0';
filename = filenamebuf;
if ((handle = fopen(filename, "rb")) == NULL)
{
// If we failed to load the file with the path as specified by
// the user, strip the directories and search for the file.
nameonly(filenamebuf);
// If findfile finds the file, the full path will be returned
// in filenamebuf == filename.
if (findfile(filenamebuf, NULL, true))
{
if ((handle = fopen(filename, "rb")) == NULL)
{
CONS_Alert(CONS_ERROR, M_GetText("Can't open %s\n"), filename);
return;
}
}
else
{
CONS_Alert(CONS_ERROR, M_GetText("File %s not found.\n"), filename);
return;
}
}
fclose(handle);
// pass the path we found to Lua
// luaL_loadfile will open and read the file in as a Lua function
if (luaL_loadfile(gL, filename)) {
CONS_Alert(CONS_ERROR,"%s\n",lua_tostring(gL,-1));
lua_pop(gL, 1);
return;
}
// dump it back to disk
if ((handle = fopen(filename, "wb")) == NULL)
CONS_Alert(CONS_ERROR, M_GetText("Can't write to %s\n"), filename);
if (lua_dump(gL, dumpWriter, handle))
CONS_Printf("Failed while writing %s to disk... Sorry!\n", filename);
else
CONS_Printf("Successfully compiled %s into bytecode.\n", filename);
fclose(handle);
lua_pop(gL, 1); // function is still on stack after lua_dump
lua_gc(gL, LUA_GCCOLLECT, 0);
return;
}
开发者ID:HipsterLion,项目名称:SRB2,代码行数:57,代码来源:lua_script.c
示例11: CV_RegisterVar
/** Registers a variable for later use from the console.
*
* \param variable The variable to register.
*/
void CV_RegisterVar(consvar_t *variable)
{
// first check to see if it has already been defined
if (CV_FindVar(variable->name))
{
CONS_Printf(M_GetText("Variable %s is already defined\n"), variable->name);
return;
}
// check for overlap with a command
if (COM_Exists(variable->name))
{
CONS_Printf(M_GetText("%s is a command name\n"), variable->name);
return;
}
// check net variables
if (variable->flags & CV_NETVAR)
{
const consvar_t *netvar;
variable->netid = CV_ComputeNetid(variable->name);
netvar = CV_FindNetVar(variable->netid);
if (netvar)
I_Error("Variables %s and %s have same netid\n", variable->name, netvar->name);
}
// link the variable in
if (!(variable->flags & CV_HIDEN))
{
variable->next = consvar_vars;
consvar_vars = variable;
}
variable->string = variable->zstring = NULL;
variable->changed = 0; // new variable has not been modified by the user
#ifdef PARANOIA
if ((variable->flags & CV_NOINIT) && !(variable->flags & CV_CALL))
I_Error("variable %s has CV_NOINIT without CV_CALL\n", variable->name);
if ((variable->flags & CV_CALL) && !variable->func)
I_Error("variable %s has CV_CALL without a function\n", variable->name);
#endif
if (variable->flags & CV_NOINIT)
variable->flags &= ~CV_CALL;
Setvalue(variable, variable->defaultvalue, false);
if (variable->flags & CV_NOINIT)
variable->flags |= CV_CALL;
// the SetValue will set this bit
variable->flags &= ~CV_MODIFIED;
}
开发者ID:ilag11111,项目名称:SRB2,代码行数:57,代码来源:command.c
示例12: I_PlayCD
void I_PlayCD (UINT8 track, UINT8 looping)
{
#ifdef NOSDLCD
(void)track;
(void)looping;
#else
if (!cdrom || !cdEnabled)
return;
if (!cdValid)
{
CDAudio_GetAudioDiskInfo();
if (!cdValid)
return;
}
track = cdRemap[track];
if (track < 1 || track > maxTrack)
{
CONS_Printf(M_GetText("Bad track number %u.\n"), track);
return;
}
// don't try to play a non-audio track
if (cdrom->track[track].type == SDL_DATA_TRACK)
{
CONS_Printf(M_GetText("Track %u is not audio\n"), track);
return;
}
if (cdPlaying)
{
if (playTrack == track)
return;
I_StopCD();
}
if (SDL_CDPlayTracks(cdrom, track, 0, 1, 0))
{
CONS_Printf(M_GetText("Error playing track %d: %s\n"), track, SDL_GetError());
return;
}
playLooping = looping;
playTrack = (Uint8)track;
cdPlaying = SDL_TRUE;
if (cd_volume.value == 0)
I_PauseCD();
#endif
}
开发者ID:ZilverXZX,项目名称:SRB2,代码行数:52,代码来源:i_cdmus.c
示例13: COM_ExecuteString
/** Parses a single line of text into arguments and tries to execute it.
* The text can come from the command buffer, a remote client, or stdin.
*
* \param ptext A single line of text.
*/
static void COM_ExecuteString(char *ptext)
{
xcommand_t *cmd;
cmdalias_t *a;
static INT32 recursion = 0; // detects recursion and stops it if it goes too far
COM_TokenizeString(ptext);
// execute the command line
if (COM_Argc() == 0)
return; // no tokens
// check functions
for (cmd = com_commands; cmd; cmd = cmd->next)
{
if (!stricmp(com_argv[0], cmd->name)) //case insensitive now that we have lower and uppercase!
{
recursion = 0;
cmd->function();
return;
}
}
// check aliases
for (a = com_alias; a; a = a->next)
{
if (!stricmp(com_argv[0], a->name))
{
if (recursion > MAX_ALIAS_RECURSION)
{
CONS_Alert(CONS_WARNING, M_GetText("Alias recursion cycle detected!\n"));
recursion = 0;
return;
}
recursion++;
COM_BufInsertText(a->value);
return;
}
}
recursion = 0;
// check cvars
// Hurdler: added at Ebola's request ;)
// (don't flood the console in software mode with bad gr_xxx command)
if (!CV_Command() && con_destlines)
CONS_Printf(M_GetText("Unknown command '%s'\n"), COM_Argv(0));
}
开发者ID:TehRealSalt,项目名称:SRB2,代码行数:53,代码来源:command.c
示例14: ConnectionFailed
static INT32 ConnectionFailed(void)
{
con_state = MSCS_FAILED;
CONS_Printf("%s", M_GetText("Connection to master server failed\n"));
CloseConnection();
return MS_CONNECT_ERROR;
}
开发者ID:Logan-A,项目名称:SRB2-Public,代码行数:7,代码来源:mserv.c
示例15: GetServersList
/** Gets a list of game servers from the master server.
*/
static INT32 GetServersList(void)
{
msg_t msg;
INT32 count = 0;
msg.type = GET_SERVER_MSG;
msg.length = 0;
msg.room = 0;
if (MS_Write(&msg) < 0)
return MS_WRITE_ERROR;
while (MS_Read(&msg) >= 0)
{
if (!msg.length)
{
if (!count)
CONS_Printf("%s", M_GetText("No servers currently running.\n"));
return MS_NO_ERROR;
}
count++;
CONS_Printf("%s",msg.buffer);
}
return MS_READ_ERROR;
}
开发者ID:Logan-A,项目名称:SRB2-Public,代码行数:27,代码来源:mserv.c
示例16: COM_Alias_f
/** Creates a command name that replaces another command.
*/
static void COM_Alias_f(void)
{
cmdalias_t *a;
char cmd[1024];
size_t i, c;
if (COM_Argc() < 3)
{
CONS_Printf(M_GetText("alias <name> <command>: create a shortcut command that executes other command(s)\n"));
return;
}
a = ZZ_Alloc(sizeof *a);
a->next = com_alias;
com_alias = a;
a->name = Z_StrDup(COM_Argv(1));
// copy the rest of the command line
cmd[0] = 0; // start out with a null string
c = COM_Argc();
for (i = 2; i < c; i++)
{
strcat(cmd, COM_Argv(i));
if (i != c)
strcat(cmd, " ");
}
strcat(cmd, "\n");
a->value = Z_StrDup(cmd);
}
开发者ID:RedEnchilada,项目名称:SRB2,代码行数:33,代码来源:command.c
示例17: S_AddSoundFx
// Add a new sound fx into a free sfx slot.
//
sfxenum_t S_AddSoundFx(const char *name, boolean singular, INT32 flags, boolean skinsound)
{
sfxenum_t i, slot;
if (skinsound)
slot = sfx_skinsoundslot0;
else
slot = sfx_freeslot0;
for (i = slot; i < NUMSFX; i++)
{
if (!S_sfx[i].priority)
{
strncpy(freeslotnames[i-sfx_freeslot0], name, 6);
S_sfx[i].singularity = singular;
S_sfx[i].priority = 60;
S_sfx[i].pitch = flags;
S_sfx[i].volume = -1;
S_sfx[i].lumpnum = LUMPERROR;
S_sfx[i].skinsound = -1;
S_sfx[i].usefulness = -1;
/// \todo if precached load it here
S_sfx[i].data = NULL;
return i;
}
}
CONS_Alert(CONS_WARNING, M_GetText("No more free sound slots\n"));
return 0;
}
开发者ID:PrisimaTheFox,项目名称:SRB2,代码行数:32,代码来源:sounds.c
示例18: VID_Command_Mode_f
// vid_mode <modenum>
//
static void VID_Command_Mode_f(void)
{
int modenum;
if (COM_Argc() != 2)
{
CONS_Printf(M_GetText("vid_mode <modenum> : set video mode, current video mode %i\n"), vid.modenum);
return;
}
modenum = atoi(COM_Argv(1));
if (modenum > VID_NumModes() || modenum < NUMSPECIALMODES) // don't accept the windowed mode 0
CONS_Printf("%s", M_GetText("No video modes present\n"));
else
setmodeneeded = modenum + 1; // request vid mode change
}
开发者ID:Logan-A,项目名称:SRB2-Public,代码行数:19,代码来源:win_vid.c
示例19: CL_CheckDownloadable
/** Checks the server to see if we CAN download all the files,
* before starting to create them and requesting.
*
* \return True if we can download all the files
*
*/
boolean CL_CheckDownloadable(void)
{
UINT8 i,dlstatus = 0;
for (i = 0; i < fileneedednum; i++)
if (fileneeded[i].status != FS_FOUND && fileneeded[i].status != FS_OPEN && fileneeded[i].important)
{
if (fileneeded[i].willsend == 1)
continue;
if (fileneeded[i].willsend == 0)
dlstatus = 1;
else //if (fileneeded[i].willsend == 2)
dlstatus = 2;
}
// Downloading locally disabled
if (!dlstatus && M_CheckParm("-nodownload"))
dlstatus = 3;
if (!dlstatus)
return true;
// not downloadable, put reason in console
CONS_Alert(CONS_NOTICE, M_GetText("You need additional files to connect to this server:\n"));
for (i = 0; i < fileneedednum; i++)
if (fileneeded[i].status != FS_FOUND && fileneeded[i].status != FS_OPEN && fileneeded[i].important)
{
CONS_Printf(" * \"%s\" (%dK)", fileneeded[i].filename, fileneeded[i].totalsize >> 10);
if (fileneeded[i].status == FS_NOTFOUND)
CONS_Printf(M_GetText(" not found, md5: "));
else if (fileneeded[i].status == FS_MD5SUMBAD)
CONS_Printf(M_GetText(" wrong version, md5: "));
{
INT32 j;
char md5tmp[33];
for (j = 0; j < 16; j++)
sprintf(&md5tmp[j*2], "%02x", fileneeded[i].md5sum[j]);
CONS_Printf("%s", md5tmp);
}
CONS_Printf("\n");
}
开发者ID:TehRealSalt,项目名称:SRB2,代码行数:50,代码来源:d_netfil.c
示例20: RegisterServer
void RegisterServer(void)
{
if (con_state == MSCS_REGISTERED || con_state == MSCS_WAITING)
return;
CONS_Printf("%s", M_GetText("Registering this server to the master server...\n"));
strcpy(registered_server.ip, GetMasterServerIP());
strcpy(registered_server.port, GetMasterServerPort());
if (MS_Connect(registered_server.ip, registered_server.port, 1))
{
CONS_Printf("%s", M_GetText("cannot connect to the master server\n"));
return;
}
MSOpenUDPSocket();
// keep the TCP connection open until AddToMasterServer() is completed;
}
开发者ID:Logan-A,项目名称:SRB2-Public,代码行数:19,代码来源:mserv.c
注:本文中的M_GetText函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论