• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ MUTEX_EXIT函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MUTEX_EXIT函数的典型用法代码示例。如果您正苦于以下问题:C++ MUTEX_EXIT函数的具体用法?C++ MUTEX_EXIT怎么用?C++ MUTEX_EXIT使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MUTEX_EXIT函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: SalvageLogCleanupThread

/*
 * thread to combine salvager child logs
 * back into the main salvageserver log
 */
static void *
SalvageLogCleanupThread(void * arg)
{
    struct log_cleanup_node * cleanup;

    MUTEX_ENTER(&worker_lock);

    while (1) {
	while (queue_IsEmpty(&log_cleanup_queue)) {
	    CV_WAIT(&log_cleanup_queue.queue_change_cv, &worker_lock);
	}

	while (queue_IsNotEmpty(&log_cleanup_queue)) {
	    cleanup = queue_First(&log_cleanup_queue, log_cleanup_node);
	    queue_Remove(cleanup);
	    MUTEX_EXIT(&worker_lock);
	    SalvageLogCleanup(cleanup->pid);
	    free(cleanup);
	    MUTEX_ENTER(&worker_lock);
	}
    }

    MUTEX_EXIT(&worker_lock);
    return NULL;
}
开发者ID:adeason,项目名称:openafs,代码行数:29,代码来源:salvaged.c


示例2: afs_tp_start

/**
 * start a thread pool.
 *
 * @param[in] pool  thread pool object
 *
 * @return operation status
 *    @retval 0 success
 *    @retval AFS_TP_ERROR thread create failure
 */
int
afs_tp_start(struct afs_thread_pool * pool)
{
    int code, ret = 0;
    struct afs_thread_pool_worker * worker;
    afs_uint32 i;

    MUTEX_ENTER(&pool->lock);
    if (pool->state != AFS_TP_STATE_INIT) {
        ret = AFS_TP_ERROR;
        goto done_sync;
    }
    pool->state = AFS_TP_STATE_STARTING;
    MUTEX_EXIT(&pool->lock);

    for (i = 0; i < pool->max_threads; i++) {
        code = _afs_tp_worker_start(pool, &worker);
        if (code) {
            ret = code;
        }
    }

    MUTEX_ENTER(&pool->lock);
    pool->state = AFS_TP_STATE_RUNNING;
done_sync:
    MUTEX_EXIT(&pool->lock);

    return ret;
}
开发者ID:sanchit-matta,项目名称:openafs,代码行数:38,代码来源:thread_pool.c


示例3: VLockFileLock

/**
 * lock a file on disk for the process.
 *
 * @param[in] lf       the struct VLockFile representing the file to lock
 * @param[in] offset   the offset in the file to lock
 * @param[in] locktype READ_LOCK or WRITE_LOCK
 * @param[in] nonblock 0 to wait for conflicting locks to clear before
 *                     obtaining the lock; 1 to fail immediately if a
 *                     conflicting lock is held by someone else
 *
 * @return operation status
 *  @retval 0 success
 *  @retval EBUSY someone else is holding a conflicting lock and nonblock=1 was
 *                specified
 *  @retval EIO   error acquiring file lock
 *
 * @note DAFS only
 *
 * @note do not try to lock/unlock the same offset in the same file from
 * different threads; use VGetDiskLock to protect threads from each other in
 * addition to other processes
 */
int
VLockFileLock(struct VLockFile *lf, afs_uint32 offset, int locktype, int nonblock)
{
    int code;

    osi_Assert(locktype == READ_LOCK || locktype == WRITE_LOCK);

    MUTEX_ENTER(&lf->mutex);

    if (lf->fd == INVALID_FD) {
	lf->fd = _VOpenPath(lf->path);
	if (lf->fd == INVALID_FD) {
	    MUTEX_EXIT(&lf->mutex);
	    return EIO;
	}
    }

    lf->refcount++;

    MUTEX_EXIT(&lf->mutex);

    code = _VLockFd(lf->fd, offset, locktype, nonblock);

    if (code) {
	MUTEX_ENTER(&lf->mutex);
	if (--lf->refcount < 1) {
	    _VCloseFd(lf->fd);
	    lf->fd = INVALID_FD;
	}
	MUTEX_EXIT(&lf->mutex);
    }

    return code;
}
开发者ID:sanchit-matta,项目名称:openafs,代码行数:56,代码来源:vutil.c


示例4: _afs_tp_worker_run

/**
 * low-level thread entry point.
 *
 * @param[in] rock opaque pointer to thread worker object
 *
 * @return opaque return pointer from pool entry function
 *
 * @internal
 */
static void *
_afs_tp_worker_run(void * rock)
{
    struct afs_thread_pool_worker * worker = rock;
    struct afs_thread_pool * pool = worker->pool;

    /* register worker with pool */
    MUTEX_ENTER(&pool->lock);
    queue_Append(&pool->thread_list, worker);
    pool->nthreads++;
    MUTEX_EXIT(&pool->lock);

    /* call high-level entry point */
    worker->ret = (*pool->entry)(pool, worker, pool->work_queue, pool->rock);

    /* adjust pool live thread count */
    MUTEX_ENTER(&pool->lock);
    osi_Assert(pool->nthreads);
    queue_Remove(worker);
    pool->nthreads--;
    if (!pool->nthreads) {
        CV_BROADCAST(&pool->shutdown_cv);
        pool->state = AFS_TP_STATE_STOPPED;
    }
    MUTEX_EXIT(&pool->lock);

    _afs_tp_worker_free(worker);

    return NULL;
}
开发者ID:sanchit-matta,项目名称:openafs,代码行数:39,代码来源:thread_pool.c


示例5: multi_Select

/* Return the user's connection index of the most recently ready call; that is, a call that has received at least one reply packet */
int
multi_Select(struct multi_handle *mh)
{
    int index;
    SPLVAR;
    NETPRI;
#ifdef RX_ENABLE_LOCKS
    MUTEX_ENTER(&mh->lock);
#endif /* RX_ENABLE_LOCKS */
    while (mh->nextReady == mh->firstNotReady) {
	if (mh->nReady == mh->nConns) {
#ifdef RX_ENABLE_LOCKS
	    MUTEX_EXIT(&mh->lock);
#endif /* RX_ENABLE_LOCKS */
	    USERPRI;
	    return -1;
	}
#ifdef RX_ENABLE_LOCKS
	CV_WAIT(&mh->cv, &mh->lock);
#else /* RX_ENABLE_LOCKS */
	osi_rxSleep(mh);
#endif /* RX_ENABLE_LOCKS */
    }
    index = *(mh->nextReady);
    (mh->nextReady) += 1;
#ifdef RX_ENABLE_LOCKS
    MUTEX_EXIT(&mh->lock);
#endif /* RX_ENABLE_LOCKS */
    USERPRI;
    return index;
}
开发者ID:chanke,项目名称:openafs-osd,代码行数:32,代码来源:rx_multi.c


示例6: hxge_hw_init_niu_common

void
hxge_hw_init_niu_common(p_hxge_t hxgep)
{
	p_hxge_hw_list_t hw_p;

	HXGE_DEBUG_MSG((hxgep, DDI_CTL, "==> hxge_hw_init_niu_common"));

	if ((hw_p = hxgep->hxge_hw_p) == NULL) {
		return;
	}

	MUTEX_ENTER(&hw_p->hxge_cfg_lock);
	if (hw_p->flags & COMMON_INIT_DONE) {
		HXGE_DEBUG_MSG((hxgep, MOD_CTL, "hxge_hw_init_niu_common"
		    " already done for dip $%p exiting", hw_p->parent_devp));
		MUTEX_EXIT(&hw_p->hxge_cfg_lock);
		return;
	}

	hw_p->flags = COMMON_INIT_START;
	HXGE_DEBUG_MSG((hxgep, MOD_CTL,
	    "hxge_hw_init_niu_common Started for device id %x",
	    hw_p->parent_devp));

	(void) hxge_pfc_hw_reset(hxgep);
	hw_p->flags = COMMON_INIT_DONE;
	MUTEX_EXIT(&hw_p->hxge_cfg_lock);

	HXGE_DEBUG_MSG((hxgep, MOD_CTL,
	    "hxge_hw_init_niu_common Done for device id %x",
	    hw_p->parent_devp));
	HXGE_DEBUG_MSG((hxgep, DDI_CTL, "<== hxge_hw_init_niu_common"));
}
开发者ID:MatiasNAmendola,项目名称:AuroraUX-SunOS,代码行数:33,代码来源:hxge_hw.c


示例7: MUTEX_EXIT

int32_t
OMR::Monitor::exit()
   {
#ifdef WIN32
   MUTEX_EXIT(_monitor);
   return 0;
#else
   int32_t rc = MUTEX_EXIT(_monitor);
   TR_ASSERT(rc == 0, "error unlocking monitor\n");
   return rc;
#endif
   }
开发者ID:TianyuZuo,项目名称:omr,代码行数:12,代码来源:OMRMonitor.cpp


示例8: defined

int32_t
OMR::Monitor::exit()
   {
#if defined(OMR_OS_WINDOWS)
   MUTEX_EXIT(_monitor);
   return 0;
#else
   int32_t rc = MUTEX_EXIT(_monitor);
   TR_ASSERT(rc == 0, "error unlocking monitor\n");
   return rc;
#endif /* defined(OMR_OS_WINDOWS) */
   }
开发者ID:hangshao0,项目名称:omr,代码行数:12,代码来源:OMRMonitor.cpp


示例9: valgrindClearRange

void valgrindClearRange(MM_GCExtensionsBase *extensions, uintptr_t baseAddress, uintptr_t size)
{
    if (size == 0)
    {
        return;
    }
    uintptr_t topInclusiveAddr = baseAddress + size - 1;

#if defined(VALGRIND_REQUEST_LOGS)
    VALGRIND_PRINTF_BACKTRACE("Clearing objects in range b/w 0x%lx and  0x%lx\n", baseAddress, topInclusiveAddr);
#endif /* defined(VALGRIND_REQUEST_LOGS) */

    MUTEX_ENTER(extensions->memcheckHashTableMutex);
    GC_HashTableIterator it(extensions->memcheckHashTable);
    uintptr_t *currentSlotPointer = (uintptr_t *)it.nextSlot();
    while (currentSlotPointer != NULL)
    {
        if (baseAddress <= *currentSlotPointer && topInclusiveAddr >= *currentSlotPointer)
        {
            valgrindFreeObjectDirect(extensions, *currentSlotPointer);
            it.removeSlot();
        }
        currentSlotPointer = (uintptr_t *)it.nextSlot();
    }
    MUTEX_EXIT(extensions->memcheckHashTableMutex);

    /* Valgrind automatically marks free objects as noaccess.
    We still mark the entire region as no access for any left out areas */
    valgrindMakeMemNoaccess(baseAddress, size);
}
开发者ID:LinHu2016,项目名称:omr,代码行数:30,代码来源:MemcheckWrapper.cpp


示例10: ipf_read_random

static int
ipf_read_random(void *dest, int length)
{
	if (length > inpot)
		return 0;

	MUTEX_ENTER(&arc4_mtx);
	if (pothead + length > pot + sizeof(pot)) {
		int left, numbytes;

		left = length;
		numbytes = pot + sizeof(pot) - pothead;
		bcopy(pothead, dest, numbytes);
		left -= numbytes;
		pothead = pot;
		bcopy(pothead, dest + length - left, left);
		pothead += left;
	} else {
		bcopy(pothead, dest, length);
		pothead += length;
	}
	inpot -= length;
	if (inpot == 0)
		pothead = pottail = pot;
	MUTEX_EXIT(&arc4_mtx);

	return length;
}
开发者ID:VargMon,项目名称:netbsd-cvs-mirror,代码行数:28,代码来源:arc4random.c


示例11: valgrindFreeObject

void valgrindFreeObject(MM_GCExtensionsBase *extensions, uintptr_t baseAddress)
{
    int objSize;
    if (MM_ForwardedHeader((omrobjectptr_t)baseAddress).isForwardedPointer())
    {
        /* In scavanger an object may act as pointer to another object(it's replica in another region).
           In this case, getConsumedSizeInBytesWithHeader returns some junk value.
           So instead we calculate the size of the object (replica) it is pointing to 
           and use it for freeing original object.
        */
        omrobjectptr_t fwObject = MM_ForwardedHeader((omrobjectptr_t)baseAddress).getForwardedObject();
        objSize = (int)((GC_ObjectModel)extensions->objectModel).getConsumedSizeInBytesWithHeader(fwObject);
    }
    else
    {
        objSize = (int)((GC_ObjectModel)extensions->objectModel).getConsumedSizeInBytesWithHeader((omrobjectptr_t)baseAddress);
    }

#if defined(VALGRIND_REQUEST_LOGS)
    VALGRIND_PRINTF_BACKTRACE("Clearing an object at 0x%lx of size %d\n", baseAddress, objSize);
#endif /* defined(VALGRIND_REQUEST_LOGS) */

    VALGRIND_CHECK_MEM_IS_DEFINED(baseAddress, objSize);
    VALGRIND_MEMPOOL_FREE(extensions->valgrindMempoolAddr, baseAddress);

    MUTEX_ENTER(extensions->memcheckHashTableMutex);
    hashTableRemove(extensions->memcheckHashTable, &baseAddress);
    MUTEX_EXIT(extensions->memcheckHashTableMutex);
}
开发者ID:LinHu2016,项目名称:omr,代码行数:29,代码来源:MemcheckWrapper.cpp


示例12: canWrite

afs_int32
canWrite(int fid)
{
#ifndef AFS_PTHREAD_ENV
    afs_int32 code = 0;
#endif
    extern dumpSyncP dumpSyncPtr;

    ObtainWriteLock(&dumpSyncPtr->ds_lock);

    /* let the pipe drain */
    while (dumpSyncPtr->ds_bytes > 0) {
	if (dumpSyncPtr->ds_readerStatus == DS_WAITING) {
	    dumpSyncPtr->ds_readerStatus = 0;
#ifdef AFS_PTHREAD_ENV
	    CV_BROADCAST(&dumpSyncPtr->ds_readerStatus_cond);
#else
	    code = LWP_SignalProcess(&dumpSyncPtr->ds_readerStatus);
	    if (code)
		LogError(code, "canWrite: Signal delivery failed\n");
#endif
	}
	dumpSyncPtr->ds_writerStatus = DS_WAITING;
	ReleaseWriteLock(&dumpSyncPtr->ds_lock);
#ifdef AFS_PTHREAD_ENV
	MUTEX_ENTER(&dumpSyncPtr->ds_writerStatus_mutex);
	CV_WAIT(&dumpSyncPtr->ds_writerStatus_cond, &dumpSyncPtr->ds_writerStatus_mutex);
	MUTEX_EXIT(&dumpSyncPtr->ds_writerStatus_mutex);
#else
	LWP_WaitProcess(&dumpSyncPtr->ds_writerStatus);
#endif
	ObtainWriteLock(&dumpSyncPtr->ds_lock);
    }
    return (1);
}
开发者ID:adeason,项目名称:openafs,代码行数:35,代码来源:db_dump.c


示例13: afs_cv_timedwait

void
afs_cv_timedwait(afs_kcondvar_t * cv, afs_kmutex_t * l, int waittime)
{
    int seq, isAFSGlocked = ISAFS_GLOCK();
    long t = waittime * HZ / 1000;
#ifdef DECLARE_WAITQUEUE
    DECLARE_WAITQUEUE(wait, current);
#else
    struct wait_queue wait = { current, NULL };
#endif
    seq = cv->seq;

    set_current_state(TASK_INTERRUPTIBLE);
    add_wait_queue(&cv->waitq, &wait);

    if (isAFSGlocked)
	AFS_GUNLOCK();
    MUTEX_EXIT(l);

    while(seq == cv->seq) {
	t = schedule_timeout(t);
	if (!t)         /* timeout */
	    break;
    }
    
    remove_wait_queue(&cv->waitq, &wait);
    set_current_state(TASK_RUNNING);

    if (isAFSGlocked)
	AFS_GLOCK();
    MUTEX_ENTER(l);
}
开发者ID:stevenjenkins,项目名称:openafs,代码行数:32,代码来源:rx_kmutex.c


示例14: hxge_mmac_stat_update

/*ARGSUSED*/
static int
hxge_mmac_stat_update(kstat_t *ksp, int rw)
{
	p_hxge_t		hxgep;
	p_hxge_mmac_kstat_t	mmac_kstatsp;

	hxgep = (p_hxge_t)ksp->ks_private;
	if (hxgep == NULL)
		return (-1);

	HXGE_DEBUG_MSG((hxgep, KST_CTL, "==> hxge_mmac_stat_update"));

	if (rw == KSTAT_WRITE) {
		cmn_err(CE_WARN, "Can not write mmac stats");
	} else {
		MUTEX_ENTER(hxgep->genlock);
		mmac_kstatsp = (p_hxge_mmac_kstat_t)ksp->ks_data;
		mmac_kstatsp->mmac_max_addr_cnt.value.ul = hxgep->mmac.total;
		mmac_kstatsp->mmac_avail_addr_cnt.value.ul =
		    hxgep->mmac.available;
		mmac_kstatsp->mmac_addr1.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[0].addr);
		mmac_kstatsp->mmac_addr2.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[1].addr);
		mmac_kstatsp->mmac_addr3.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[2].addr);
		mmac_kstatsp->mmac_addr4.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[3].addr);
		mmac_kstatsp->mmac_addr5.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[4].addr);
		mmac_kstatsp->mmac_addr6.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[5].addr);
		mmac_kstatsp->mmac_addr7.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[6].addr);
		mmac_kstatsp->mmac_addr8.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[7].addr);
		mmac_kstatsp->mmac_addr9.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[8].addr);
		mmac_kstatsp->mmac_addr10.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[9].addr);
		mmac_kstatsp->mmac_addr11.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[10].addr);
		mmac_kstatsp->mmac_addr12.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[11].addr);
		mmac_kstatsp->mmac_addr13.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[12].addr);
		mmac_kstatsp->mmac_addr14.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[13].addr);
		mmac_kstatsp->mmac_addr15.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[14].addr);
		mmac_kstatsp->mmac_addr16.value.ul =
		    hxge_mac_octet_to_u64(hxgep->mmac.addrs[15].addr);
		MUTEX_EXIT(hxgep->genlock);
	}

	HXGE_DEBUG_MSG((hxgep, KST_CTL, "<== hxge_mmac_stat_update"));
	return (0);
}
开发者ID:apprisi,项目名称:illumos-gate,代码行数:59,代码来源:hxge_kstats.c


示例15: rxkad_InitKeytabDecrypt

int
rxkad_InitKeytabDecrypt(const char *csdb, const char *ktname)
{
    int code;
    static int keytab_init;
    INIT_PTHREAD_LOCKS;
    MUTEX_ENTER(&krb5_lock);
    if (keytab_init) {
	MUTEX_EXIT(&krb5_lock);
	return 0;
    }
    checkfile_path = strdup(csdb);
    if (checkfile_path == NULL) {
	code = ENOMEM;
	goto cleanup;
    }
    k5ctx = NULL;
    keytab_name = NULL;
    code = krb5_init_context(&k5ctx);
    if (code != 0)
	goto cleanup;
    if (ktname != NULL) {
	keytab_name = strdup(ktname);
	if (keytab_name == NULL) {
	    code = KRB5_KT_BADNAME;
	    goto cleanup;
	}
    }
    keytab_init=1;
    reload_keys();
    MUTEX_EXIT(&krb5_lock);
    return 0;
cleanup:
    if (checkfile_path != NULL) {
	free(checkfile_path);
    }
    if (keytab_name != NULL) {
	free(keytab_name);
    }
    if (k5ctx != NULL) {
	krb5_free_context(k5ctx);
    }
    MUTEX_EXIT(&krb5_lock);
    return code;
}
开发者ID:adeason,项目名称:openafs,代码行数:45,代码来源:ticket5_keytab.c


示例16: afs_tp_shutdown

/**
 * shut down all threads in pool.
 *
 * @param[in] pool  thread pool object
 * @param[in] block wait for all threads to terminate, if asserted
 *
 * @return operation status
 *    @retval 0 success
 */
int
afs_tp_shutdown(struct afs_thread_pool * pool,
                int block)
{
    int ret = 0;
    struct afs_thread_pool_worker * worker, *nn;

    MUTEX_ENTER(&pool->lock);
    if (pool->state == AFS_TP_STATE_STOPPED
            || pool->state == AFS_TP_STATE_STOPPING) {
        goto done_stopped;
    }
    if (pool->state != AFS_TP_STATE_RUNNING) {
        ret = AFS_TP_ERROR;
        goto done_sync;
    }
    pool->state = AFS_TP_STATE_STOPPING;

    for (queue_Scan(&pool->thread_list, worker, nn, afs_thread_pool_worker)) {
        worker->req_shutdown = 1;
    }
    if (!pool->nthreads) {
        pool->state = AFS_TP_STATE_STOPPED;
    }
    /* need to drop lock to get a membar here */
    MUTEX_EXIT(&pool->lock);

    ret = afs_wq_shutdown(pool->work_queue);
    if (ret) {
        goto error;
    }

    MUTEX_ENTER(&pool->lock);
done_stopped:
    if (block) {
        while (pool->nthreads) {
            CV_WAIT(&pool->shutdown_cv, &pool->lock);
        }
    }
done_sync:
    MUTEX_EXIT(&pool->lock);

error:
    return ret;
}
开发者ID:sanchit-matta,项目名称:openafs,代码行数:54,代码来源:thread_pool.c


示例17: rx_GetStatistics

/*!
 * Return the internal statistics collected by rx
 *
 * @return
 * 	A statistics structure which must be freed using rx_FreeStatistics
 * @notes
 * 	Takes, and releases rx_stats_mutex
 */
struct rx_statistics *
rx_GetStatistics(void) {
    struct rx_statistics *stats = rxi_Alloc(sizeof(struct rx_statistics));
    MUTEX_ENTER(&rx_stats_mutex);
    memcpy(stats, &rx_stats, sizeof(struct rx_statistics));
    MUTEX_EXIT(&rx_stats_mutex);

    return stats;
}
开发者ID:sanchit-matta,项目名称:openafs,代码行数:17,代码来源:rx_stats.c


示例18: SAMP_ThreadComplete

void SAMP_ThreadComplete()
{
	// free mutex
	MUTEX_EXIT(MultiThreadMutex);
	// sleep
	SLEEP(5);
	// close mutex
	MUTEX_ENTER(MultiThreadMutex);
}
开发者ID:MsEmiNeko,项目名称:samp-alex009-projects,代码行数:9,代码来源:thread.cpp


示例19: afs_tp_is_online

/**
 * check whether thread pool is online.
 *
 * @param[in] pool  thread pool object
 *
 * @return whether pool is online
 *    @retval 1 pool is online
 *    @retval 0 pool is not online
 */
int
afs_tp_is_online(struct afs_thread_pool * pool)
{
    int ret;

    MUTEX_ENTER(&pool->lock);
    ret = (pool->state == AFS_TP_STATE_RUNNING);
    MUTEX_EXIT(&pool->lock);

    return ret;
}
开发者ID:sanchit-matta,项目名称:openafs,代码行数:20,代码来源:thread_pool.c


示例20: valgrindCheckObjectInPool

bool valgrindCheckObjectInPool(MM_GCExtensionsBase *extensions, uintptr_t baseAddress)
{
#if defined(VALGRIND_REQUEST_LOGS)
    VALGRIND_PRINTF("Checking for an object at 0x%lx\n", baseAddress);
#endif /* defined(VALGRIND_REQUEST_LOGS) */

    MUTEX_ENTER(extensions->memcheckHashTableMutex);
    bool exists = hashTableFind(extensions->memcheckHashTable, &baseAddress) != NULL ? true : false;
    MUTEX_EXIT(extensions->memcheckHashTableMutex);
    return exists;
}
开发者ID:LinHu2016,项目名称:omr,代码行数:11,代码来源:MemcheckWrapper.cpp



注:本文中的MUTEX_EXIT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MUTEX_HELD函数代码示例发布时间:2022-05-30
下一篇:
C++ MUTEX_ENTER函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap