C++ MTS_DEBUG_GOT_HERE函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MTS_DEBUG_GOT_HERE函数的典型用法代码示例。如果您正苦于以下问题：C++ MTS_DEBUG_GOT_HERE函数的具体用法？C++ MTS_DEBUG_GOT_HERE怎么用？C++ MTS_DEBUG_GOT_HERE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MTS_DEBUG_GOT_HERE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mts_command_done

static void mts_command_done( struct urb *transfer )
/* Interrupt context! */
{
	MTS_INT_INIT();

	if ( transfer->status ) {
	        if (transfer->status == -ENOENT) {
		        /* We are being killed */
			MTS_DEBUG_GOT_HERE();
			context->srb->result = DID_ABORT<<16;
                } else {
		        /* A genuine error has occured */
			MTS_DEBUG_GOT_HERE();

		        context->srb->result = DID_ERROR<<16;
                }
		mts_transfer_cleanup(transfer);

		return;
	}

	if ( context->data ) {
		mts_int_submit_urb(transfer,
				   context->data_pipe,
				   context->data,
				   context->data_length,
				   context->srb->use_sg ? mts_do_sg : mts_data_done);
	} else mts_get_status(transfer);

	return;
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:31，代码来源:microtek.c

示例2: mts_urb_abort

static inline void mts_urb_abort(struct mts_desc* desc) {
	MTS_DEBUG_GOT_HERE();
	mts_debug_dump(desc);
	if ( desc->urb.status == USB_ST_URB_PENDING ) {
		usb_unlink_urb( &desc->urb );
	}
}

开发者ID:davidbau，项目名称:davej，代码行数:7，代码来源:microtek.c

示例3: mts_scsi_detect

static int mts_scsi_detect (struct SHT * sht)
{
	/* Whole function stolen from usb-storage */
	
	struct mts_desc * desc = (struct mts_desc *)sht->proc_dir;
	/* What a hideous hack! */
	  
	char local_name[48];

	MTS_DEBUG_GOT_HERE();

	/* set up the name of our subdirectory under /proc/scsi/ */
	sprintf(local_name, "microtek-%d", desc->host_number);
	sht->proc_name = kmalloc (strlen(local_name) + 1, GFP_KERNEL);
	/* FIXME: where is this freed ? */

	if (!sht->proc_name) {
		MTS_ERROR( "unable to allocate memory for proc interface!!\n" );
		return 0;
	}
	
	strcpy(sht->proc_name, local_name);

 	sht->proc_dir = NULL;

	/* In host->hostdata we store a pointer to desc */
	desc->host = scsi_register(sht, sizeof(desc));
	desc->host->hostdata[0] = (unsigned long)desc;
/* FIXME: what if sizeof(void*) != sizeof(unsigned long)? */ 

	return 1;
}

开发者ID:davidbau，项目名称:davej，代码行数:32，代码来源:microtek.c

示例4: mts_urb_abort

static inline void mts_urb_abort(struct mts_desc* desc) {
	spin_unlock_irq(&io_request_lock);
	MTS_DEBUG_GOT_HERE();
	mts_debug_dump(desc);

	usb_unlink_urb( &desc->urb );
	spin_lock_irq(&io_request_lock);
}

开发者ID:SimonKagstrom，项目名称:mci500h-linux-2.4.27，代码行数:8，代码来源:microtek.c

示例5: mts_scsi_abort

static int mts_scsi_abort (Scsi_Cmnd *srb)
{
	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);

	MTS_DEBUG_GOT_HERE();

	mts_urb_abort(desc);

	return FAILED;
}

开发者ID:FatSunHYS，项目名称:OSCourseDesign，代码行数:10，代码来源:microtek.c

示例6: mts_scsi_host_reset

static int mts_scsi_host_reset (Scsi_Cmnd *srb)
{
	struct mts_desc* desc = (struct mts_desc*)(srb->host->hostdata[0]);

	MTS_DEBUG_GOT_HERE();
	mts_debug_dump(desc);

	usb_reset_device(desc->usb_dev); /*FIXME: untested on new reset code */
	return 0;  /* RANT why here 0 and not SUCCESS */
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:10，代码来源:microtek.c

示例7: mts_scsi_abort

static int mts_scsi_abort (Scsi_Cmnd *srb)
{
	struct mts_desc* desc = (struct mts_desc*)(srb->host->hostdata[0]);

	MTS_DEBUG_GOT_HERE();

	mts_urb_abort(desc);

	return SCSI_ABORT_PENDING;
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:10，代码来源:microtek.c

示例8: mts_scsi_queuecommand_lck

static int
mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
{
	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
	int err = 0;
	int res;

	MTS_DEBUG_GOT_HERE();
	mts_show_command(srb);
	mts_debug_dump(desc);

	if ( srb->device->lun || srb->device->id || srb->device->channel ) {

		MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel );

		MTS_DEBUG("this device doesn't exist\n");

		srb->result = DID_BAD_TARGET << 16;

		if(likely(callback != NULL))
			callback(srb);

		goto out;
	}

	
	usb_fill_bulk_urb(desc->urb,
		      desc->usb_dev,
		      usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
		      srb->cmnd,
		      srb->cmd_len,
		      mts_command_done,
		      &desc->context
		      );


	mts_build_transfer_context( srb, desc );
	desc->context.final_callback = callback;
	
	/* here we need ATOMIC as we are called with the iolock */
	res=usb_submit_urb(desc->urb, GFP_ATOMIC);

	if(unlikely(res)){
		MTS_ERROR("error %d submitting URB\n",(int)res);
		srb->result = DID_ERROR << 16;

		if(likely(callback != NULL))
			callback(srb);

	}
out:
	return err;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:53，代码来源:microtek.c

示例9: mts_scsi_abort

static int mts_scsi_abort (Scsi_Cmnd *srb)
/* interrupt context (!) */ /* FIXME this is about to become task context */
{
	struct mts_desc* desc = (struct mts_desc*)(srb->host->hostdata[0]);

	MTS_DEBUG_GOT_HERE();
	
	mts_request_abort(desc);
	mts_urb_abort(desc);
	
	return SCSI_ABORT_PENDING;
}

开发者ID:davidbau，项目名称:davej，代码行数:12，代码来源:microtek.c

示例10: mts_scsi_queuecommand

static
int mts_scsi_queuecommand( Scsi_Cmnd *srb, mts_scsi_cmnd_callback callback )
{
	struct mts_desc* desc = (struct mts_desc*)(srb->host->hostdata[0]);
	int err = 0;
	int res;

	MTS_DEBUG_GOT_HERE();
	mts_show_command(srb);
	mts_debug_dump(desc);

	if ( srb->device->lun || srb->device->id || srb->device->channel ) {

		MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel );

		MTS_DEBUG("this device doesn't exist\n");

		srb->result = DID_BAD_TARGET << 16;

		if(callback)
			callback(srb);

		goto out;
	}

	
	FILL_BULK_URB(&desc->urb,
		      desc->usb_dev,
		      usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
		      srb->cmnd,
		      srb->cmd_len,
		      mts_command_done,
		      &desc->context
		      );


	mts_build_transfer_context( srb, desc );
	desc->context.final_callback = callback;
	
	res=usb_submit_urb(&desc->urb);

	if(res){
		MTS_ERROR("error %d submitting URB\n",(int)res);
		srb->result = DID_ERROR << 16;

		if(callback)
			callback(srb);

	}

out:
	return err;
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:53，代码来源:microtek.c

示例11: mts_remove_nolock

static
void mts_remove_nolock( struct mts_desc* to_remove )
{
	MTS_DEBUG( "removing 0x%x from list\n",
		   (int)to_remove );

	lock_kernel();
	mts_urb_abort(to_remove);

	MTS_DEBUG_GOT_HERE();

	if ( to_remove != mts_list ) {
		MTS_DEBUG_GOT_HERE();
		if (to_remove->prev && to_remove->next)
			to_remove->prev->next = to_remove->next;
	} else {
		MTS_DEBUG_GOT_HERE();
		mts_list = to_remove->next;
		if (mts_list) {
			MTS_DEBUG_GOT_HERE();
			mts_list->prev = 0;
		}
	}

	if ( to_remove->next ) {
		MTS_DEBUG_GOT_HERE();
		to_remove->next->prev = to_remove->prev;
	}

	MTS_DEBUG_GOT_HERE();
	scsi_unregister_host(&to_remove->ctempl);
	unlock_kernel();

	kfree( to_remove );
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:35，代码来源:microtek.c

示例12: mts_usb_disconnect

static void mts_usb_disconnect (struct usb_device *dev, void *ptr)
{
	struct mts_desc* to_remove = (struct mts_desc*)ptr;

	MTS_DEBUG_GOT_HERE();

	/* leave the list - lock it */
	down(&mts_list_semaphore);

	mts_remove_nolock(to_remove);

	up(&mts_list_semaphore);
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:13，代码来源:microtek.c

示例13: mts_build_transfer_context

static void
mts_build_transfer_context( Scsi_Cmnd *srb, struct mts_desc* desc )
{
	int pipe;
	struct scatterlist * sg;
	
	MTS_DEBUG_GOT_HERE();

	desc->context.instance = desc;
	desc->context.srb = srb;
	desc->context.fragment = 0;

	if (!srb->use_sg) {
		if ( !srb->bufflen ){
			desc->context.data = 0;
			desc->context.data_length = 0;
			return;
		} else {
			desc->context.data = srb->buffer;
			desc->context.data_length = srb->bufflen;
			MTS_DEBUG("length = %d or %d\n",
				  srb->request_bufflen, srb->bufflen);
		}
	} else {
		MTS_DEBUG("Using scatter/gather\n");
		sg = srb->buffer;
		desc->context.data = sg[0].address;
		desc->context.data_length = sg[0].length;
	}


	/* can't rely on srb->sc_data_direction */

	/* Brutally ripped from usb-storage */

	if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
) { 		pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
		MTS_DEBUG( "transfering from desc->ep_image == %d\n",
			   (int)desc->ep_image );
	} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
			pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
			MTS_DEBUG( "transfering from desc->ep_response == %d\n",
				   (int)desc->ep_response);
	} else {
		MTS_DEBUG("transfering to desc->ep_out == %d\n",
			  (int)desc->ep_out);
		pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
	}
	desc->context.data_pipe = pipe;
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:50，代码来源:microtek.c

示例14: mts_scsi_host_reset

static int mts_scsi_host_reset(struct scsi_cmnd *srb)
{
	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
	int result;

	MTS_DEBUG_GOT_HERE();
	mts_debug_dump(desc);

	result = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf);
	if (result == 0) {
		result = usb_reset_device(desc->usb_dev);
		usb_unlock_device(desc->usb_dev);
	}
	return result ? FAILED : SUCCESS;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:15，代码来源:microtek.c

示例15: mts_build_transfer_context

static void
mts_build_transfer_context( Scsi_Cmnd *srb, struct mts_desc* desc )
{

	int pipe;


	MTS_DEBUG_GOT_HERE();

	desc->context.instance = desc;
	desc->context.srb = srb;
	desc->context.state = mts_con_command;
	atomic_set(&desc->context.do_abort,0);
	
	if ( !srb->bufflen ){
		desc->context.data = 0;
		desc->context.data_length = 0;
		return;
	} else {
		desc->context.data = srb->buffer;
		desc->context.data_length = srb->bufflen;
	}
	
	/* can't rely on srb->sc_data_direction */

	/* Brutally ripped from usb-storage */

	if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
) { 		pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
		MTS_DEBUG( "transfering from desc->ep_image == %d\n",
			   (int)desc->ep_image );
	} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
			pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
			MTS_DEBUG( "transfering from desc->ep_response == %d\n",
				   (int)desc->ep_response);
	} else {
		MTS_DEBUG("transfering to desc->ep_out == %d\n",
			  (int)desc->ep_out);
		pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
	}
	desc->context.data_pipe = pipe;
}

开发者ID:davidbau，项目名称:davej，代码行数:42，代码来源:microtek.c

示例16: mts_build_transfer_context

static void
mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
{
	int pipe;
	struct scatterlist * sg;
	
	MTS_DEBUG_GOT_HERE();

	desc->context.instance = desc;
	desc->context.srb = srb;
	desc->context.fragment = 0;

	if (!scsi_bufflen(srb)) {
		desc->context.data = NULL;
		desc->context.data_length = 0;
		return;
	} else {
		sg = scsi_sglist(srb);
		desc->context.data = sg_virt(&sg[0]);
		desc->context.data_length = sg[0].length;
	}


	/* can't rely on srb->sc_data_direction */

	/* Brutally ripped from usb-storage */

	if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
) { 		pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
		MTS_DEBUG( "transfering from desc->ep_image == %d\n",
			   (int)desc->ep_image );
	} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
			pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
			MTS_DEBUG( "transfering from desc->ep_response == %d\n",
				   (int)desc->ep_response);
	} else {
		MTS_DEBUG("transfering to desc->ep_out == %d\n",
			  (int)desc->ep_out);
		pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
	}
	desc->context.data_pipe = pipe;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:42，代码来源:microtek.c

示例17: mts_build_transfer_context

static void
mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
{
	int pipe;
	struct scatterlist * sg;
	
	MTS_DEBUG_GOT_HERE();

	desc->context.instance = desc;
	desc->context.srb = srb;
	desc->context.fragment = 0;

	if (!scsi_bufflen(srb)) {
		desc->context.data = NULL;
		desc->context.data_length = 0;
		return;
	} else {
		sg = scsi_sglist(srb);
		desc->context.data = sg_virt(&sg[0]);
		desc->context.data_length = sg

开发者ID:raghavendraba，项目名称:linux，代码行数:20，代码来源:microtek.c

示例18: microtek_drv_exit

void __exit microtek_drv_exit(void)
{
	struct mts_desc* next;

	MTS_DEBUG_GOT_HERE();

	usb_deregister(&mts_usb_driver);

	down(&mts_list_semaphore);

	while (mts_list) {
		/* keep track of where the next one is */
		next = mts_list->next;

		mts_remove_nolock( mts_list );

		/* advance the list pointer */
		mts_list = next;
	}

	up(&mts_list_semaphore);
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:22，代码来源:microtek.c

示例19: mts_usb_probe

static void * mts_usb_probe (struct usb_device *dev, unsigned int interface,
			     const struct usb_device_id *id)
{
	int i;
	int result;
	int ep_out = -1;
	int ep_in_set[3]; /* this will break if we have more than three endpoints
			   which is why we check */
	int *ep_in_current = ep_in_set;

	struct mts_desc * new_desc;
	struct vendor_product const* p;

	/* the altsettting 0 on the interface we're probing */
	struct usb_interface_descriptor *altsetting;

	MTS_DEBUG_GOT_HERE();
	MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );

	MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
		   (int)dev->descriptor.idProduct,
		   (int)dev->descriptor.idVendor );

	MTS_DEBUG_GOT_HERE();

	p = &mts_supported_products[id - mts_usb_ids];

	MTS_DEBUG_GOT_HERE();

	MTS_DEBUG( "found model %s\n", p->name );
	if ( p->support_status != mts_sup_full )
		MTS_MESSAGE( "model %s is not known to be fully supported, reports welcome!\n",
			     p->name );

	/* the altsettting 0 on the interface we're probing */
	altsetting =
		&(dev->actconfig->interface[interface].altsetting[0]);


	/* Check if the config is sane */

	if ( altsetting->bNumEndpoints != MTS_EP_TOTAL ) {
		MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
			     (int)MTS_EP_TOTAL, (int)altsetting->bNumEndpoints );
		return NULL;
	}

	for( i = 0; i < altsetting->bNumEndpoints; i++ ) {
		if ((altsetting->endpoint[i].bmAttributes &
		     USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {

			MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
			     (int)altsetting->endpoint[i].bEndpointAddress );
		} else {
			if (altsetting->endpoint[i].bEndpointAddress &
			    USB_DIR_IN)
				*ep_in_current++
					= altsetting->endpoint[i].bEndpointAddress &
					USB_ENDPOINT_NUMBER_MASK;
			else {
				if ( ep_out != -1 ) {
					MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
					return NULL;
				}

				ep_out = altsetting->endpoint[i].bEndpointAddress &
					USB_ENDPOINT_NUMBER_MASK;
			}
		}

	}


	if ( ep_out == -1 ) {
		MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
		return NULL;
	}


	/* I don't understand the following fully (it's from usb-storage) -- John */

	/* set the interface -- STALL is an acceptable response here */
	result = usb_set_interface(dev, altsetting->bInterfaceNumber, 0);

	MTS_DEBUG("usb_set_interface returned %d.\n",result);
	switch( result )
	{
	case 0: /* no error */
		break;
		
	case -EPIPE:
		usb_clear_halt(dev, usb_sndctrlpipe(dev, 0));
		MTS_DEBUG( "clearing clearing stall on control interface\n" );
		break;
		
	default:
		MTS_DEBUG( "unknown error %d from usb_set_interface\n",
			(int)result );
 		return NULL;
	}
//.........这里部分代码省略.........

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:101，代码来源:microtek.c

示例20: mts_usb_probe

static int mts_usb_probe(struct usb_interface *intf,
			 const struct usb_device_id *id)
{
	int i;
	int ep_out = -1;
	int ep_in_set[3]; 
	int *ep_in_current = ep_in_set;
	int err_retval = -ENOMEM;

	struct mts_desc * new_desc;
	struct usb_device *dev = interface_to_usbdev (intf);

	
	struct usb_host_interface *altsetting;

	MTS_DEBUG_GOT_HERE();
	MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );

	MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
		   le16_to_cpu(dev->descriptor.idProduct),
		   le16_to_cpu(dev->descriptor.idVendor) );

	MTS_DEBUG_GOT_HERE();

	
	altsetting = intf->cur_altsetting;


	

	if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) {
		MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
			     (int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints );
		return -ENODEV;
	}

	for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) {
		if ((altsetting->endpoint[i].desc.bmAttributes &
		     USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {

			MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
			     (int)altsetting->endpoint[i].desc.bEndpointAddress );
		} else {
			if (altsetting->endpoint[i].desc.bEndpointAddress &
			    USB_DIR_IN)
				*ep_in_current++
					= altsetting->endpoint[i].desc.bEndpointAddress &
					USB_ENDPOINT_NUMBER_MASK;
			else {
				if ( ep_out != -1 ) {
					MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
					return -ENODEV;
				}

				ep_out = altsetting->endpoint[i].desc.bEndpointAddress &
					USB_ENDPOINT_NUMBER_MASK;
			}
		}

	}


	if ( ep_out == -1 ) {
		MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
		return -ENODEV;
	}


	new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
	if (!new_desc)
		goto out;

	new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
	if (!new_desc->urb)
		goto out_kfree;

	new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL);
	if (!new_desc->context.scsi_status)
		goto out_free_urb;

	new_desc->usb_dev = dev;
	new_desc->usb_intf = intf;

	
	new_desc->ep_out = ep_out;
	new_desc->ep_response = ep_in_set[0];
	new_desc->ep_image = ep_in_set[1];

	if ( new_desc->ep_out != MTS_EP_OUT )
		MTS_WARNING( "will this work? Command EP is not usually %d\n",
			     (int)new_desc->ep_out );

	if ( new_desc->ep_response != MTS_EP_RESPONSE )
		MTS_WARNING( "will this work? Response EP is not usually %d\n",
			     (int)new_desc->ep_response );

	if ( new_desc->ep_image != MTS_EP_IMAGE )
		MTS_WARNING( "will this work? Image data EP is not usually %d\n",
			     (int)new_desc->ep_image );

//.........这里部分代码省略.........

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:101，代码来源:microtek.c

注：本文中的MTS_DEBUG_GOT_HERE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MTWF_LOG函数代码示例发布时间：2022-05-30

C++ MTP_string函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19245|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10003|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8333|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8702|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8648|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9674|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8634|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8007|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8670|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7541|2022-11-06

客服电话

电子邮件

C++ MTS_DEBUG_GOT_HERE函数代码示例

示例1: mts_command_done

示例2: mts_urb_abort

示例3: mts_scsi_detect

示例4: mts_urb_abort

示例5: mts_scsi_abort

示例6: mts_scsi_host_reset

示例7: mts_scsi_abort

示例8: mts_scsi_queuecommand_lck

示例9: mts_scsi_abort

示例10: mts_scsi_queuecommand

示例11: mts_remove_nolock

示例12: mts_usb_disconnect

示例13: mts_build_transfer_context

示例14: mts_scsi_host_reset

示例15: mts_build_transfer_context

示例16: mts_build_transfer_context

示例17: mts_build_transfer_context

示例18: microtek_drv_exit

示例19: mts_usb_probe

示例20: mts_usb_probe

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-23003

小程序-跳转页面的方法及坑

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053