C++ MPIU_ERR_POP函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MPIU_ERR_POP函数的典型用法代码示例。如果您正苦于以下问题：C++ MPIU_ERR_POP函数的具体用法？C++ MPIU_ERR_POP怎么用？C++ MPIU_ERR_POP使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MPIU_ERR_POP函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MPID_nem_gm_finalize

int
MPID_nem_gm_finalize()
{
    int mpi_errno = MPI_SUCCESS;
    int max_send_tokens;
    MPID_nem_gm_send_queue_t *e;

    max_send_tokens = gm_num_send_tokens (MPID_nem_module_gm_port);
    
    while (MPID_nem_module_gm_num_send_tokens < max_send_tokens && !MPID_nem_gm_queue_empty (send))
    {
	mpi_errno = MPID_nem_gm_recv_poll();
        if (mpi_errno) MPIU_ERR_POP (mpi_errno);
    }
    
    while (MPID_nem_gm_send_free_queue)
    {
	e = MPID_nem_gm_send_free_queue;
	MPID_nem_gm_send_free_queue = e->next;
	MPIU_Free (e);
    }
    
    mpi_errno = MPID_nem_gm_lmt_finalize();
    if (mpi_errno) MPIU_ERR_POP (mpi_errno);

    gm_finalize();

 fn_exit:
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:OngOngoing，项目名称:219351_homework，代码行数:32，代码来源:gm_finalize.c

示例2: MPIR_Ibsend_cancel

PMPI_LOCAL int MPIR_Ibsend_cancel( void *extra, int complete )
{
    int mpi_errno = MPI_SUCCESS;
    ibsend_req_info *ibsend_info = (ibsend_req_info *)extra;
    MPI_Status status;
    MPID_Request *req = ibsend_info->req;

    /* FIXME: There should be no unreferenced args! */
    /* Note that this value should always be 1 because
       Grequest_complete is called on this request when it is
       created */
    MPIU_UNREFERENCED_ARG(complete);


    /* Try to cancel the underlying request */
    mpi_errno = MPIR_Cancel_impl(req);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    mpi_errno = MPIR_Wait_impl( &req->handle, &status );
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    MPIR_Test_cancelled_impl( &status, &ibsend_info->cancelled );

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:wilseypa，项目名称:llamaOS，代码行数:26，代码来源:ibsend.c

示例3: split_type

static int split_type(MPID_Comm * comm_ptr, int stype, int key,
                      MPID_Info *info_ptr, MPID_Comm ** newcomm_ptr)
{
    MPID_Node_id_t id;
    MPIR_Rank_t nid;
    int mpi_errno = MPI_SUCCESS;

    if (MPIDI_CH3I_Shm_supported()) {
        mpi_errno = MPID_Get_node_id(comm_ptr, comm_ptr->rank, &id);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }
    else
        id = comm_ptr->rank;

    nid = (stype == MPI_COMM_TYPE_SHARED) ? id : MPI_UNDEFINED;
    mpi_errno = MPIR_Comm_split_impl(comm_ptr, nid, key, newcomm_ptr);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

  fn_exit:
    return mpi_errno;

    /* --BEGIN ERROR HANDLING-- */
  fn_fail:
    goto fn_exit;
    /* --END ERROR HANDLING-- */
}

开发者ID:adevress，项目名称:MPICH-BlueGene，代码行数:26，代码来源:ch3_init.c

示例4: MPID_nem_ptl_init_id

int MPID_nem_ptl_init_id(MPIDI_VC_t *vc)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_nem_ptl_vc_area *const vc_ptl = VC_PTL(vc);
    char *bc;
    int pmi_errno;
    int val_max_sz;
    MPIU_CHKLMEM_DECL(1);
    MPIDI_STATE_DECL(MPID_STATE_MPID_NEM_PTL_INIT_ID);

    MPIDI_FUNC_ENTER(MPID_STATE_MPID_NEM_PTL_INIT_ID);

    pmi_errno = PMI_KVS_Get_value_length_max(&val_max_sz);
    MPIU_ERR_CHKANDJUMP1(pmi_errno, mpi_errno, MPI_ERR_OTHER, "**fail", "**fail %d", pmi_errno);
    MPIU_CHKLMEM_MALLOC(bc, char *, val_max_sz, mpi_errno, "bc");

    mpi_errno = vc->pg->getConnInfo(vc->pg_rank, bc, val_max_sz, vc->pg);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

    mpi_errno = MPID_nem_ptl_get_id_from_bc(bc, &vc_ptl->id, &vc_ptl->pt, &vc_ptl->ptg, &vc_ptl->ptc, &vc_ptl->ptr, &vc_ptl->ptrg, &vc_ptl->ptrc);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

    vc_ptl->id_initialized = TRUE;

    MPIDI_CHANGE_VC_STATE(vc, ACTIVE);
    
 fn_exit:
    MPIU_CHKLMEM_FREEALL();
    MPIDI_FUNC_EXIT(MPID_STATE_MPID_NEM_PTL_INIT_ID);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:syftalent，项目名称:dist-sys-exercises-1，代码行数:33，代码来源:ptl_init.c

示例5: MPIDI_CH3_SHM_Win_free

int MPIDI_CH3_SHM_Win_free(MPID_Win **win_ptr)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_STATE_DECL(MPID_STATE_MPIDI_CH3_SHM_WIN_FREE);

    MPIDI_RMA_FUNC_ENTER(MPID_STATE_MPIDI_CH3_SHM_WIN_FREE);

    /* Free shared memory region */
    if ((*win_ptr)->shm_allocated) {
        /* free shm_base_addrs that's only used for shared memory windows */
        MPIU_Free((*win_ptr)->shm_base_addrs);
        /* detach from shared memory segment */
        mpi_errno = MPIU_SHMW_Seg_detach((*win_ptr)->shm_segment_handle, (char **)&(*win_ptr)->shm_base_addr,
                                         (*win_ptr)->shm_segment_len);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);

        MPIU_SHMW_Hnd_finalize(&(*win_ptr)->shm_segment_handle);
    }

    mpi_errno = MPIDI_Win_free(win_ptr);
    if (mpi_errno != MPI_SUCCESS) { MPIU_ERR_POP(mpi_errno); }

fn_exit:
    MPIDI_RMA_FUNC_EXIT(MPID_STATE_MPIDI_CH3_SHM_WIN_FREE);
    return mpi_errno;

fn_fail:
    goto fn_exit;
}

开发者ID:qingu，项目名称:WRF-Libraries，代码行数:29，代码来源:ch3_rma_shm.c

示例6: MPID_Nem_nd_init

int MPID_Nem_nd_init(MPIDI_PG_t *pg_p, int pg_rank, char **bc_val_p, int *val_max_sz_p)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_STATE_DECL(MPID_STATE_MPID_NEM_ND_INIT);

    MPIDI_FUNC_ENTER(MPID_STATE_MPID_NEM_ND_INIT);

    /* Initialize Executive */
    mpi_errno = MPIU_ExInitialize();
    if(mpi_errno != MPI_SUCCESS) MPIU_ERR_POP(mpi_errno);

    /* Initialize ND state machine */
    mpi_errno = MPID_Nem_nd_sm_init();
    if(mpi_errno != MPI_SUCCESS) MPIU_ERR_POP(mpi_errno);

    /* Listen for conns & create the business card */
    mpi_errno = MPID_Nem_nd_listen_for_conn(pg_rank, bc_val_p, val_max_sz_p);
    if(mpi_errno != MPI_SUCCESS) MPIU_ERR_POP(mpi_errno);

 fn_exit:
    MPIDI_FUNC_EXIT(MPID_STATE_MPID_NEM_ND_INIT);
    return mpi_errno;
 fn_fail:
    MPIU_DBG_MSG_D(CH3_CHANNEL, VERBOSE, "failed, mpi_errno = %d", mpi_errno);
    goto fn_exit;
}

开发者ID:OngOngoing，项目名称:219351_homework，代码行数:26，代码来源:nd_init.cpp

示例7: MPIR_Igatherv_impl

int MPIR_Igatherv_impl(const void *sendbuf, int sendcount, MPI_Datatype sendtype, void *recvbuf,
                       const int recvcounts[], const int displs[], MPI_Datatype recvtype,
                       int root, MPID_Comm *comm_ptr, MPI_Request *request)
{
    int mpi_errno = MPI_SUCCESS;
    int tag = -1;
    MPID_Request *reqp = NULL;
    MPID_Sched_t s = MPID_SCHED_NULL;

    *request = MPI_REQUEST_NULL;

    mpi_errno = MPID_Sched_next_tag(comm_ptr, &tag);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    mpi_errno = MPID_Sched_create(&s);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

    MPIU_Assert(comm_ptr->coll_fns != NULL);
    MPIU_Assert(comm_ptr->coll_fns->Igatherv != NULL);
    mpi_errno = comm_ptr->coll_fns->Igatherv(sendbuf, sendcount, sendtype, recvbuf, recvcounts, displs, recvtype, root, comm_ptr, s);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

    mpi_errno = MPID_Sched_start(&s, comm_ptr, tag, &reqp);
    if (reqp)
        *request = reqp->handle;
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:agrimaldi，项目名称:pmap，代码行数:31，代码来源:igatherv.c

示例8: get_addr

static int get_addr(MPIDI_VC_t * vc, struct scif_portID *addr)
{
    int mpi_errno = MPI_SUCCESS;
    char *bc;
    int pmi_errno;
    int val_max_sz;
    MPIU_CHKLMEM_DECL(1);

    /* Allocate space for the business card */
    pmi_errno = PMI_KVS_Get_value_length_max(&val_max_sz);
    MPIU_ERR_CHKANDJUMP1(pmi_errno, mpi_errno, MPI_ERR_OTHER, "**fail",
                         "**fail %d", pmi_errno);
    MPIU_CHKLMEM_MALLOC(bc, char *, val_max_sz, mpi_errno, "bc");

    mpi_errno = vc->pg->getConnInfo(vc->pg_rank, bc, val_max_sz, vc->pg);
    if (mpi_errno)
        MPIU_ERR_POP(mpi_errno);

    mpi_errno = scif_addr_from_bc(bc, &addr->node, &addr->port);
    if (mpi_errno)
        MPIU_ERR_POP(mpi_errno);

  fn_exit:
    MPIU_CHKLMEM_FREEALL();
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:dbrowneup，项目名称:pmap，代码行数:28，代码来源:scif_init.c

示例9: MPIDI_CH3I_Comm_init

int MPIDI_CH3I_Comm_init(void)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_STATE_DECL(MPID_STATE_MPIDI_CH3U_COMM_INIT);

    MPIDI_FUNC_ENTER(MPID_STATE_MPIDI_CH3U_COMM_INIT);

    MPIR_Add_finalize(register_hook_finalize, NULL, MPIR_FINALIZE_CALLBACK_PRIO-1);

    /* register hooks for keeping track of communicators */
    mpi_errno = MPIDI_CH3U_Comm_register_create_hook(comm_created, NULL);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

#if defined HAVE_LIBHCOLL
    if (MPIR_CVAR_CH3_ENABLE_HCOLL) {
        mpi_errno = MPIDI_CH3U_Comm_register_create_hook(hcoll_comm_create, NULL);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
        mpi_errno = MPIDI_CH3U_Comm_register_destroy_hook(hcoll_comm_destroy, NULL);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }
#endif

    mpi_errno = MPIDI_CH3U_Comm_register_destroy_hook(comm_destroyed, NULL);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    
 fn_exit:
    MPIDI_FUNC_EXIT(MPID_STATE_MPIDI_CH3U_COMM_INIT);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:mpifl，项目名称:mpich3newforfile，代码行数:31，代码来源:ch3u_comm.c

示例10: send_sreq_data

static int send_sreq_data(MPIDI_VC_t *vc, MPID_Request *sreq, knem_cookie_t *s_cookiep)
{
    int mpi_errno = MPI_SUCCESS;
    int dt_contig;
    MPI_Aint dt_true_lb;
    MPIDI_msg_sz_t data_sz;
    MPID_Datatype * dt_ptr;

    /* MT: this code assumes only one thread can be at this point at a time */
    if (knem_fd < 0) {
        mpi_errno = open_knem_dev();
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }

    /* find out contig/noncontig, size, and lb for the datatype */
    MPIDI_Datatype_get_info(sreq->dev.user_count, sreq->dev.datatype,
                            dt_contig, data_sz, dt_ptr, dt_true_lb);

    if (dt_contig) {
        /* handle the iov creation ourselves */
        sreq->dev.iov[0].MPID_IOV_BUF = (char *)sreq->dev.user_buf + dt_true_lb;
        sreq->dev.iov[0].MPID_IOV_LEN = data_sz;
        sreq->dev.iov_count = 1;
    }
    else {
        /* use the segment routines to handle the iovec creation */
        if (sreq->dev.segment_ptr == NULL) {
            sreq->dev.iov_count = MPID_IOV_LIMIT;
            sreq->dev.iov_offset = 0;

            /* segment_ptr may be non-null when this is a continuation of a
               many-part message that we couldn't fit in one single flight of
               iovs. */
            sreq->dev.segment_ptr = MPID_Segment_alloc();
            MPIU_ERR_CHKANDJUMP1((sreq->dev.segment_ptr == NULL), mpi_errno,
                                 MPI_ERR_OTHER, "**nomem",
                                 "**nomem %s", "MPID_Segment_alloc");
            MPID_Segment_init(sreq->dev.user_buf, sreq->dev.user_count,
                              sreq->dev.datatype, sreq->dev.segment_ptr, 0);
            sreq->dev.segment_first = 0;
            sreq->dev.segment_size = data_sz;


            /* FIXME we should write our own function that isn't dependent on
               the in-request iov array.  This will let us use IOVs that are
               larger than MPID_IOV_LIMIT. */
            mpi_errno = MPIDI_CH3U_Request_load_send_iov(sreq, &sreq->dev.iov[0],
                                                         &sreq->dev.iov_count);
            if (mpi_errno) MPIU_ERR_POP(mpi_errno);
        }
    }

    mpi_errno = do_dma_send(vc, sreq, sreq->dev.iov_count, sreq->dev.iov, s_cookiep);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:adevress，项目名称:MPICH-BlueGene，代码行数:60，代码来源:mpid_nem_lmt_dma.c

示例11: MPIR_Comm_dup_impl

int MPIR_Comm_dup_impl(MPID_Comm *comm_ptr, MPID_Comm **newcomm_ptr)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_Attribute *new_attributes = 0;

    /* Copy attributes, executing the attribute copy functions */
    /* This accesses the attribute dup function through the perprocess
       structure to prevent comm_dup from forcing the linking of the
       attribute functions.  The actual function is (by default)
       MPIR_Attr_dup_list
    */
    if (MPIR_Process.attr_dup) {
	mpi_errno = MPIR_Process.attr_dup( comm_ptr->handle,
                                           comm_ptr->attributes,
                                           &new_attributes );
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }

    
    /* Generate a new context value and a new communicator structure */
    /* We must use the local size, because this is compared to the
       rank of the process in the communicator.  For intercomms,
       this must be the local size */
    mpi_errno = MPIR_Comm_copy( comm_ptr, comm_ptr->local_size, newcomm_ptr );
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

    (*newcomm_ptr)->attributes = new_attributes;

 fn_exit:
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:abhinavvishnu，项目名称:matex，代码行数:33，代码来源:comm_dup.c

示例12: MPID_Nem_nd_vc_terminate

int MPID_Nem_nd_vc_terminate (MPIDI_VC_t *vc)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_CH3I_VC *vc_ch = (MPIDI_CH3I_VC *)vc->channel_private;

    MPIDI_STATE_DECL(MPID_STATE_MPID_NEM_ND_VC_TERMINATE);

    MPIDI_FUNC_ENTER(MPID_STATE_MPID_NEM_ND_VC_TERMINATE);

    /* Poll till no more pending/posted sends */
    while(!MPID_NEM_ND_VCCH_NETMOD_POSTED_SENDQ_EMPTY(vc)
        || !MPID_NEM_ND_VCCH_NETMOD_PENDING_SENDQ_EMPTY(vc)){
        mpi_errno = MPID_Nem_nd_sm_poll(1);
        if(mpi_errno != MPI_SUCCESS) MPIU_ERR_POP(mpi_errno);
    }

    vc_ch->next = NULL;
    vc_ch->prev = NULL;
    MPID_NEM_ND_VCCH_NETMOD_STATE_SET(vc, MPID_NEM_ND_VC_STATE_DISCONNECTED);

    mpi_errno = MPID_Nem_nd_conn_disc(MPID_NEM_ND_VCCH_NETMOD_CONN_HND_GET(vc));
    if(mpi_errno != MPI_SUCCESS) MPIU_ERR_POP(mpi_errno);

    MPID_NEM_ND_VCCH_NETMOD_CONN_HND_SET(vc, MPID_NEM_ND_CONN_HND_INVALID);

 fn_exit:
    MPIDI_FUNC_EXIT(MPID_STATE_MPID_NEM_ND_VC_TERMINATE);
    return mpi_errno;
 fn_fail:
    MPIU_DBG_MSG_D(CH3_CHANNEL, VERBOSE, "failed, mpi_errno = %d", mpi_errno);
    goto fn_exit;
}

开发者ID:OngOngoing，项目名称:219351_homework，代码行数:32，代码来源:nd_finalize.cpp

示例13: MPIR_Alltoallv

int MPIR_Alltoallv(const void *sendbuf, const int *sendcounts, const int *sdispls,
                   MPI_Datatype sendtype, void *recvbuf, const int *recvcounts, const int *rdispls,
                   MPI_Datatype recvtype, MPID_Comm *comm_ptr, int *errflag)
{
    int mpi_errno = MPI_SUCCESS;

    if (comm_ptr->comm_kind == MPID_INTRACOMM) {
        /* intracommunicator */
        mpi_errno = MPIR_Alltoallv_intra(sendbuf, sendcounts, sdispls,
                                         sendtype, recvbuf, recvcounts,
                                         rdispls, recvtype, comm_ptr, errflag);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    } else {
        /* intercommunicator */
        mpi_errno = MPIR_Alltoallv_inter(sendbuf, sendcounts, sdispls,
                                         sendtype, recvbuf, recvcounts,
                                         rdispls, recvtype, comm_ptr, errflag);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:wilseypa，项目名称:llamaOS，代码行数:25，代码来源:alltoallv.c

示例14: MPIR_Iallreduce_naive

int MPIR_Iallreduce_naive(const void *sendbuf, void *recvbuf, int count, MPI_Datatype datatype, MPI_Op op, MPID_Comm *comm_ptr, MPID_Sched_t s)
{
    int mpi_errno = MPI_SUCCESS;
    int rank;

    rank = comm_ptr->rank;

    if ((sendbuf == MPI_IN_PLACE) && (rank != 0)) {
        mpi_errno = MPIR_Ireduce_intra(recvbuf, NULL, count, datatype, op, 0, comm_ptr, s);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }
    else {
        mpi_errno = MPIR_Ireduce_intra(sendbuf, recvbuf, count, datatype, op, 0, comm_ptr, s);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }

    MPID_SCHED_BARRIER(s);

    mpi_errno = MPIR_Ibcast_intra(recvbuf, count, datatype, 0, comm_ptr, s);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:adevress，项目名称:MPICH-BlueGene，代码行数:26，代码来源:iallreduce.c

示例15: MPIR_Allreduce_impl

int MPIR_Allreduce_impl(void *sendbuf, void *recvbuf, int count, MPI_Datatype datatype, MPI_Op op, MPID_Comm *comm_ptr,
                        int *errflag)
{
    int mpi_errno = MPI_SUCCESS;

    if (comm_ptr->coll_fns != NULL && comm_ptr->coll_fns->Allreduce != NULL)
    {
	mpi_errno = comm_ptr->coll_fns->Allreduce(sendbuf, recvbuf, count, datatype, op, comm_ptr, errflag);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }
    else
    {
        if (comm_ptr->comm_kind == MPID_INTRACOMM) {
            /* intracommunicator */
            mpi_errno = MPIR_Allreduce_intra(sendbuf, recvbuf, count, datatype, op, comm_ptr, errflag);
            if (mpi_errno) MPIU_ERR_POP(mpi_errno);
	}
        else {
            /* intercommunicator */
            mpi_errno = MPIR_Allreduce_inter(sendbuf, recvbuf, count, datatype, op, comm_ptr, errflag);
            if (mpi_errno) MPIU_ERR_POP(mpi_errno);
        }
    }

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:OngOngoing，项目名称:219351_homework，代码行数:29，代码来源:allreduce.c

示例16: MPIDI_CH3I_RMA_Make_progress_win

int MPIDI_CH3I_RMA_Make_progress_win(MPID_Win * win_ptr, int *made_progress)
{
    int temp_progress = 0;
    int mpi_errno = MPI_SUCCESS;

    (*made_progress) = 0;

    /* check window state */
    mpi_errno = check_window_state(win_ptr, &temp_progress);
    if (mpi_errno != MPI_SUCCESS)
        MPIU_ERR_POP(mpi_errno);
    if (temp_progress)
        (*made_progress) = 1;

    /* issue operations on window */
    mpi_errno = issue_ops_win(win_ptr, &temp_progress);
    if (mpi_errno)
        MPIU_ERR_POP(mpi_errno);
    if (temp_progress)
        (*made_progress) = 1;

  fn_exit:
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:kleiter，项目名称:mpich，代码行数:26，代码来源:ch3u_rma_progress.c

示例17: MPIR_Topology_put

int MPIR_Topology_put( MPID_Comm *comm_ptr, MPIR_Topology *topo_ptr )
{
    int mpi_errno = MPI_SUCCESS;

    MPIU_Assert(comm_ptr != NULL);

    if (MPIR_Topology_keyval == MPI_KEYVAL_INVALID) {
	/* Create a new keyval */
	/* FIXME - thread safe code needs a thread lock here, followed
	   by another test on the keyval to see if a different thread
	   got there first */
	mpi_errno = MPIR_Comm_create_keyval_impl( MPIR_Topology_copy_fn,
                                                  MPIR_Topology_delete_fn,
                                                  &MPIR_Topology_keyval, 0 );
	/* Register the finalize handler */
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
        MPIR_Add_finalize( MPIR_Topology_finalize, (void*)0,
			   MPIR_FINALIZE_CALLBACK_PRIO-1);
    }
    mpi_errno = MPIR_Comm_set_attr_impl(comm_ptr, MPIR_Topology_keyval, topo_ptr, MPIR_ATTR_PTR);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    
 fn_exit:
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:abhinavvishnu，项目名称:matex，代码行数:27，代码来源:topoutil.c

示例18: MPIR_Iexscan_impl

int MPIR_Iexscan_impl(const void *sendbuf, void *recvbuf, int count, MPI_Datatype datatype, MPI_Op op, MPID_Comm *comm_ptr, MPI_Request *request)
{
    int mpi_errno = MPI_SUCCESS;
    int tag = -1;
    MPID_Request *reqp = NULL;
    MPID_Sched_t s = MPID_SCHED_NULL;

    *request = MPI_REQUEST_NULL;

    mpi_errno = MPID_Sched_next_tag(comm_ptr, &tag);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    mpi_errno = MPID_Sched_create(&s);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

    MPIU_Assert(comm_ptr->coll_fns != NULL);
    MPIU_Assert(comm_ptr->coll_fns->Iexscan != NULL);
    mpi_errno = comm_ptr->coll_fns->Iexscan(sendbuf, recvbuf, count, datatype, op, comm_ptr, s);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

    mpi_errno = MPID_Sched_start(&s, comm_ptr, tag, &reqp);
    if (reqp)
        *request = reqp->handle;
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:agrimaldi，项目名称:pmap，代码行数:29，代码来源:iexscan.c

示例19: vc_terminate

int vc_terminate(MPIDI_VC_t *vc)
{
    int mpi_errno = MPI_SUCCESS;
    int req_errno = MPI_SUCCESS;
    MPID_nem_ptl_vc_area *const vc_ptl = VC_PTL(vc);
    MPIDI_STATE_DECL(MPID_STATE_VC_TERMINATE);

    MPIDI_FUNC_ENTER(MPID_STATE_VC_TERMINATE);

     if (vc->state != MPIDI_VC_STATE_CLOSED) {
        /* VC is terminated as a result of a fault.  Complete
           outstanding sends with an error and terminate
           connection immediately. */
        MPIU_ERR_SET1(req_errno, MPIX_ERR_PROC_FAILED, "**comm_fail", "**comm_fail %d", vc->pg_rank);
        mpi_errno = MPID_nem_ptl_vc_terminated(vc);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
     } else if (vc_ptl->num_queued_sends == 0) {
         mpi_errno = MPID_nem_ptl_vc_terminated(vc);
         if (mpi_errno) MPIU_ERR_POP(mpi_errno);
     } else {
         /* the send_queued function will call vc_terminated if vc->state is
            CLOSED and the last queued send has been sent*/
     }
    
 fn_exit:
    MPIDI_FUNC_EXIT(MPID_STATE_VC_TERMINATE);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:syftalent，项目名称:dist-sys-exercises-1，代码行数:30，代码来源:ptl_init.c

示例20: MPIR_Alltoallv_impl

int MPIR_Alltoallv_impl(const void *sendbuf, const int *sendcounts, const int *sdispls,
                        MPI_Datatype sendtype, void *recvbuf, const int *recvcounts,
                        const int *rdispls, MPI_Datatype recvtype,
                        MPID_Comm *comm_ptr, int *errflag)
{
    int mpi_errno = MPI_SUCCESS;

    if (comm_ptr->coll_fns != NULL && comm_ptr->coll_fns->Alltoallv != NULL) {
        /* --BEGIN USEREXTENSION-- */
        mpi_errno = comm_ptr->coll_fns->Alltoallv(sendbuf, sendcounts, sdispls,
                    sendtype, recvbuf, recvcounts,
                    rdispls, recvtype, comm_ptr, errflag);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
        /* --END USEREXTENSION-- */
    } else {
        mpi_errno = MPIR_Alltoallv(sendbuf, sendcounts, sdispls,
                                   sendtype, recvbuf, recvcounts,
                                   rdispls, recvtype, comm_ptr, errflag);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);
    }

fn_exit:
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:wilseypa，项目名称:llamaOS，代码行数:26，代码来源:alltoallv.c

注：本文中的MPIU_ERR_POP函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MPIU_Free函数代码示例发布时间：2022-05-30

C++ MPIU_DBG_MSG_FMT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19243|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10002|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8333|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8702|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8648|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9674|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8633|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8007|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8670|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7541|2022-11-06

客服电话

电子邮件

C++ MPIU_ERR_POP函数代码示例

示例1: MPID_nem_gm_finalize

示例2: MPIR_Ibsend_cancel

示例3: split_type

示例4: MPID_nem_ptl_init_id

示例5: MPIDI_CH3_SHM_Win_free

示例6: MPID_Nem_nd_init

示例7: MPIR_Igatherv_impl

示例8: get_addr

示例9: MPIDI_CH3I_Comm_init

示例10: send_sreq_data

示例11: MPIR_Comm_dup_impl

示例12: MPID_Nem_nd_vc_terminate

示例13: MPIR_Alltoallv

示例14: MPIR_Iallreduce_naive

示例15: MPIR_Allreduce_impl

示例16: MPIDI_CH3I_RMA_Make_progress_win

示例17: MPIR_Topology_put

示例18: MPIR_Iexscan_impl

示例19: vc_terminate

示例20: MPIR_Alltoallv_impl

请发表评论

全部评论

上一篇：

下一篇：

微信小程序“打开调试模式可以发出请求，关

CVE-2022-21552

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053