C++ MPIR_FUNC_VERBOSE_ENTER函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MPIR_FUNC_VERBOSE_ENTER函数的典型用法代码示例。如果您正苦于以下问题：C++ MPIR_FUNC_VERBOSE_ENTER函数的具体用法？C++ MPIR_FUNC_VERBOSE_ENTER怎么用？C++ MPIR_FUNC_VERBOSE_ENTER使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MPIR_FUNC_VERBOSE_ENTER函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MPIDI_CH3_Req_handler_rma_op_complete

int MPIDI_CH3_Req_handler_rma_op_complete(MPIR_Request * sreq)
{
    int mpi_errno = MPI_SUCCESS;
    MPIR_Request *ureq = NULL;
    MPIR_Win *win_ptr = NULL;

    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPIDI_CH3_REQ_HANDLER_RMA_OP_COMPLETE);
    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPIDI_CH3_REQ_HANDLER_RMA_OP_COMPLETE);

    if (sreq->dev.rma_target_ptr != NULL) {
        (sreq->dev.rma_target_ptr)->num_pkts_wait_for_local_completion--;
    }

    /* get window, decrement active request cnt on window */
    MPIR_Win_get_ptr(sreq->dev.source_win_handle, win_ptr);
    MPIR_Assert(win_ptr != NULL);
    MPIDI_CH3I_RMA_Active_req_cnt--;
    MPIR_Assert(MPIDI_CH3I_RMA_Active_req_cnt >= 0);

    if (sreq->dev.request_handle != MPI_REQUEST_NULL) {
        /* get user request */
        MPIR_Request_get_ptr(sreq->dev.request_handle, ureq);
        mpi_errno = MPID_Request_complete(ureq);
        if (mpi_errno != MPI_SUCCESS) {
            MPIR_ERR_POP(mpi_errno);
        }
    }

  fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPIDI_CH3_REQ_HANDLER_RMA_OP_COMPLETE);
    return mpi_errno;

  fn_fail:
    goto fn_exit;
}

开发者ID:NexMirror，项目名称:MPICH，代码行数:35，代码来源:ch3u_handle_op_req.c

示例2: MPIDU_shm_barrier

/* FIXME: this is not a scalable algorithm because everyone is polling on the same cacheline */
int MPIDU_shm_barrier(MPIDU_shm_barrier_t * barrier, int num_local)
{
    int mpi_errno = MPI_SUCCESS;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPIDU_SHM_BARRIER);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPIDU_SHM_BARRIER);

    if (num_local == 1)
        goto fn_exit;

    MPIR_ERR_CHKINTERNAL(!barrier_init, mpi_errno, "barrier not initialized");

    if (OPA_fetch_and_incr_int(&barrier->val) == num_local - 1) {
        OPA_store_int(&barrier->val, 0);
        OPA_store_int(&barrier->wait, 1 - sense);
        OPA_write_barrier();
    } else {
        /* wait */
        while (OPA_load_int(&barrier->wait) == sense)
            MPL_sched_yield();  /* skip */
    }
    sense = 1 - sense;

  fn_fail:
  fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPIDU_SHM_BARRIER);
    return mpi_errno;
}

开发者ID:ParaStation，项目名称:psmpi2，代码行数:29，代码来源:mpidu_shm_barrier.c

示例3: MPIR_FUNC_VERBOSE_STATE_DECL

static MPIR_Request *create_request(MPL_IOV * iov, int iov_count, int iov_offset, size_t nb)
{
    MPIR_Request *sreq;
    int i;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_CREATE_REQUEST);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_CREATE_REQUEST);

    sreq = MPIR_Request_create(MPIR_REQUEST_KIND__SEND);
    /* --BEGIN ERROR HANDLING-- */
    if (sreq == NULL)
        return NULL;
    /* --END ERROR HANDLING-- */
    MPIR_Object_set_ref(sreq, 2);

    for (i = 0; i < iov_count; i++) {
        sreq->dev.iov[i] = iov[i];
    }
    if (iov_offset == 0) {
        MPIR_Assert(iov[0].MPL_IOV_LEN == sizeof(MPIDI_CH3_Pkt_t));
        sreq->dev.pending_pkt = *(MPIDI_CH3_Pkt_t *) iov[0].MPL_IOV_BUF;
        sreq->dev.iov[0].MPL_IOV_BUF = (MPL_IOV_BUF_CAST) & sreq->dev.pending_pkt;
    }
    sreq->dev.iov[iov_offset].MPL_IOV_BUF =
        (MPL_IOV_BUF_CAST) ((char *) sreq->dev.iov[iov_offset].MPL_IOV_BUF + nb);
    sreq->dev.iov[iov_offset].MPL_IOV_LEN -= nb;
    sreq->dev.iov_count = iov_count;
    sreq->dev.OnDataAvail = 0;

    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_CREATE_REQUEST);
    return sreq;
}

开发者ID:jeffhammond，项目名称:mpich，代码行数:32，代码来源:ch3_istartmsgv.c

示例4: create_request

static MPIR_Request * create_request(void * hdr, intptr_t hdr_sz,
                                     size_t nb)
{
    MPIR_Request * sreq;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_CREATE_REQUEST);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_CREATE_REQUEST);

    sreq = MPIR_Request_create(MPIR_REQUEST_KIND__UNDEFINED);
    /* --BEGIN ERROR HANDLING-- */
    if (sreq == NULL)
        return NULL;
    /* --END ERROR HANDLING-- */
    MPIR_Object_set_ref(sreq, 2);
    sreq->kind = MPIR_REQUEST_KIND__SEND;
    MPIR_Assert(hdr_sz == sizeof(MPIDI_CH3_Pkt_t));
    sreq->dev.pending_pkt = *(MPIDI_CH3_Pkt_t *) hdr;
    sreq->dev.iov[0].MPL_IOV_BUF =
        (MPL_IOV_BUF_CAST)((char *) &sreq->dev.pending_pkt + nb);
    sreq->dev.iov[0].MPL_IOV_LEN = hdr_sz - nb;
    sreq->dev.iov_count = 1;
    sreq->dev.OnDataAvail = 0;

    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_CREATE_REQUEST);
    return sreq;
}

开发者ID:jeffhammond，项目名称:mpich，代码行数:26，代码来源:ch3_istartmsg.c

示例5: handle_probe

static int handle_probe(const ptl_event_t *e)
{
    int mpi_errno = MPI_SUCCESS;
    MPIR_Request *const req = e->user_ptr;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_HANDLE_PROBE);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_HANDLE_PROBE);

    if (e->ni_fail_type == PTL_NI_NO_MATCH) {
        REQ_PTL(req)->found = FALSE;
        goto finish_probe;
    }

    REQ_PTL(req)->found = TRUE;
    req->status.MPI_SOURCE = NPTL_MATCH_GET_RANK(e->match_bits);
    req->status.MPI_TAG = NPTL_MATCH_GET_TAG(e->match_bits);
    MPIR_STATUS_SET_COUNT(req->status, NPTL_HEADER_GET_LENGTH(e->hdr_data));

 finish_probe:
    mpi_errno = MPID_Request_complete(req);
    if (mpi_errno != MPI_SUCCESS) {
        MPIR_ERR_POP(mpi_errno);
    }

 fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_HANDLE_PROBE);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:NexMirror，项目名称:MPICH，代码行数:30，代码来源:ptl_probe.c

示例6: handler_recv_complete

static int handler_recv_complete(const ptl_event_t *e)
{
    int mpi_errno = MPI_SUCCESS;
    MPIR_Request *const rreq = e->user_ptr;
    int ret;
    int i;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_HANDLER_RECV_COMPLETE);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_HANDLER_RECV_COMPLETE);
    
    MPIR_Assert(e->type == PTL_EVENT_REPLY || e->type == PTL_EVENT_PUT || e->type == PTL_EVENT_PUT_OVERFLOW);

    if (REQ_PTL(rreq)->md != PTL_INVALID_HANDLE) {
        ret = PtlMDRelease(REQ_PTL(rreq)->md);
        MPIR_ERR_CHKANDJUMP1(ret, mpi_errno, MPI_ERR_OTHER, "**ptlmdrelease", "**ptlmdrelease %s", MPID_nem_ptl_strerror(ret));
    }

    for (i = 0; i < MPID_NEM_PTL_NUM_CHUNK_BUFFERS; ++i)
        if (REQ_PTL(rreq)->chunk_buffer[i])
            MPL_free(REQ_PTL(rreq)->chunk_buffer[i]);
    
    mpi_errno = MPID_Request_complete(rreq);
    if (mpi_errno) {
        MPIR_ERR_POP(mpi_errno);
    }

 fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_HANDLER_RECV_COMPLETE);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:michael-chuvelev，项目名称:mpich，代码行数:32，代码来源:ptl_recv.c

示例7: MPID_Rget_accumulate

int MPID_Rget_accumulate(const void *origin_addr, int origin_count,
                         MPI_Datatype origin_datatype, void *result_addr, int result_count,
                         MPI_Datatype result_datatype, int target_rank, MPI_Aint target_disp,
                         int target_count, MPI_Datatype target_datatype, MPI_Op op,
                         MPIR_Win * win_ptr, MPIR_Request ** request)
{
    int mpi_errno = MPI_SUCCESS;
    int dt_contig ATTRIBUTE((unused));
    MPIR_Datatype*dtp;
    MPI_Aint dt_true_lb ATTRIBUTE((unused));
    intptr_t data_sz, trg_data_sz;
    MPIR_Request *ureq;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPID_RGET_ACCUMULATE);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPID_RGET_ACCUMULATE);

    /* request-based RMA operations are only valid within a passive epoch */
    MPIR_ERR_CHKANDJUMP(win_ptr->states.access_state != MPIDI_RMA_PER_TARGET &&
                        win_ptr->states.access_state != MPIDI_RMA_LOCK_ALL_CALLED &&
                        win_ptr->states.access_state != MPIDI_RMA_LOCK_ALL_ISSUED &&
                        win_ptr->states.access_state != MPIDI_RMA_LOCK_ALL_GRANTED,
                        mpi_errno, MPI_ERR_RMA_SYNC, "**rmasync");

    /* Create user request, initially cc=1, ref=1 */
    ureq = MPIR_Request_create(MPIR_REQUEST_KIND__RMA);
    MPIR_ERR_CHKANDJUMP(ureq == NULL, mpi_errno, MPI_ERR_OTHER, "**nomemreq");

    /* This request is referenced by user and ch3 by default. */
    MPIR_Object_set_ref(ureq, 2);

    /* Note that GACC is only a no-op if no data goes in both directions */
    MPIDI_Datatype_get_info(origin_count, origin_datatype, dt_contig, data_sz, dtp, dt_true_lb);
    MPIDI_Datatype_get_info(origin_count, origin_datatype, dt_contig, trg_data_sz, dtp, dt_true_lb);

    /* Enqueue or perform the RMA operation */
    if (target_rank != MPI_PROC_NULL && (data_sz != 0 || trg_data_sz != 0)) {
        mpi_errno = MPIDI_CH3I_Get_accumulate(origin_addr, origin_count,
                                              origin_datatype, result_addr,
                                              result_count, result_datatype,
                                              target_rank, target_disp,
                                              target_count, target_datatype, op, win_ptr, ureq);
        if (mpi_errno != MPI_SUCCESS) {
            MPIR_ERR_POP(mpi_errno);
        }
    }
    else {
        mpi_errno = MPID_Request_complete(ureq);
        if (mpi_errno != MPI_SUCCESS) {
            MPIR_ERR_POP(mpi_errno);
        }
    }

    *request = ureq;

  fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPID_RGET_ACCUMULATE);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:jeffhammond，项目名称:mpich，代码行数:60，代码来源:ch3u_rma_reqops.c

示例8: MPID_nem_mxm_vc_terminate

int MPID_nem_mxm_vc_terminate(MPIDI_VC_t * vc)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_nem_mxm_vc_area *vc_area = VC_BASE(vc);

    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MXM_VC_TERMINATE);
    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MXM_VC_TERMINATE);

    if (vc->state != MPIDI_VC_STATE_CLOSED) {
        /* VC is terminated as a result of a fault.  Complete
         * outstanding sends with an error and terminate connection
         * immediately. */
        MPIR_ERR_SET1(mpi_errno, MPI_ERR_OTHER, "**comm_fail", "**comm_fail %d", vc->pg_rank);
    }
    else {
        while (vc_area->pending_sends > 0)
            MPID_nem_mxm_poll(FALSE);
    }

    mpi_errno = MPIDI_CH3U_Handle_connection(vc, MPIDI_VC_EVENT_TERMINATED);
    if (mpi_errno)
        MPIR_ERR_POP(mpi_errno);

  fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MXM_VC_TERMINATE);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:NexMirror，项目名称:MPICH，代码行数:29，代码来源:mxm_init.c

示例9: MPID_Close_port

/*@
   MPID_Close_port - Close port

Input Parameters:
.  port_name - Name of MPI port to close

   Notes:

.N Errors
.N MPI_SUCCESS
.N MPI_ERR_OTHER

@*/
int MPID_Close_port(const char *port_name)
{
    int mpi_errno=MPI_SUCCESS;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPID_CLOSE_PORT);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPID_CLOSE_PORT);

    /* Check to see if we need to setup channel-specific functions
       for handling the port operations */
    if (setupPortFunctions) {
	MPIDI_CH3_PortFnsInit( &portFns );
	setupPortFunctions = 0;
    }

    /* The default for this function is 0 (no function).
       A channel may define its own function and set it in the 
       init check above; such a function may be named MPIDI_CH3_Close_port */
    if (portFns.ClosePort) {
	mpi_errno = portFns.ClosePort( port_name );
	if (mpi_errno != MPI_SUCCESS) {
	    MPIR_ERR_POP(mpi_errno);
	}
    }
    else {
	MPIR_ERR_SET(mpi_errno, MPI_ERR_OTHER, "**notimpl" );
    }

 fn_fail:	
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPID_CLOSE_PORT);
    return mpi_errno;
}

开发者ID:jeffhammond，项目名称:mpich，代码行数:44，代码来源:mpid_port.c

示例10: vc_terminate

int vc_terminate(MPIDI_VC_t *vc)
{
    int mpi_errno = MPI_SUCCESS;
    int req_errno = MPI_SUCCESS;
    MPID_nem_ptl_vc_area *const vc_ptl = VC_PTL(vc);
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_VC_TERMINATE);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_VC_TERMINATE);

     if (vc->state != MPIDI_VC_STATE_CLOSED) {
        /* VC is terminated as a result of a fault.  Complete
           outstanding sends with an error and terminate
           connection immediately. */
        MPIR_ERR_SET1(req_errno, MPIX_ERR_PROC_FAILED, "**comm_fail", "**comm_fail %d", vc->pg_rank);
        mpi_errno = MPID_nem_ptl_vc_terminated(vc);
        if (mpi_errno) MPIR_ERR_POP(mpi_errno);
     } else if (vc_ptl->num_queued_sends == 0) {
         mpi_errno = MPID_nem_ptl_vc_terminated(vc);
         if (mpi_errno) MPIR_ERR_POP(mpi_errno);
     } else {
         /* the send_queued function will call vc_terminated if vc->state is
            CLOSED and the last queued send has been sent*/
     }
    
 fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_VC_TERMINATE);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:michael-chuvelev，项目名称:mpich，代码行数:30，代码来源:ptl_init.c

示例11: MPID_Open_port

/*@
   MPID_Open_port - Open an MPI Port

   Input Arguments:
.  MPI_Info info - info

   Output Arguments:
.  char *port_name - port name

   Notes:

.N Errors
.N MPI_SUCCESS
.N MPI_ERR_OTHER
@*/
int MPID_Open_port(MPIR_Info *info_ptr, char *port_name)
{
    int mpi_errno=MPI_SUCCESS;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPIR_OPEN_PORT);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPIR_OPEN_PORT);

    /* Check to see if we need to setup channel-specific functions
       for handling the port operations */
    if (setupPortFunctions) {
	MPIDI_CH3_PortFnsInit( &portFns );
	setupPortFunctions = 0;
    }

    /* The default for this function is MPIDI_Open_port.
       A channel may define its own function and set it in the 
       init check above; such a function may be named MPIDI_CH3_Open_port.
       In addition, not all channels can implement this operation, so
       those channels will set the function pointer to NULL */
    if (portFns.OpenPort) {
	mpi_errno = portFns.OpenPort( info_ptr, port_name );
	if (mpi_errno != MPI_SUCCESS) {
	    MPIR_ERR_POP(mpi_errno);
	}
    }
    else {
	MPIR_ERR_SET(mpi_errno, MPI_ERR_OTHER, "**notimpl" );
    }

 fn_fail:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPIR_OPEN_PORT);
    return mpi_errno;
}

开发者ID:jeffhammond，项目名称:mpich，代码行数:48，代码来源:mpid_port.c

示例12: MPIDI_CH3U_Handle_send_req

int MPIDI_CH3U_Handle_send_req(MPIDI_VC_t * vc, MPIR_Request * sreq, int *complete)
{
    int mpi_errno = MPI_SUCCESS;
    int (*reqFn) (MPIDI_VC_t *, MPIR_Request *, int *);
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPIDI_CH3U_HANDLE_SEND_REQ);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPIDI_CH3U_HANDLE_SEND_REQ);

    /* Use the associated function rather than switching on the old ca field */
    /* Routines can call the attached function directly */
    reqFn = sreq->dev.OnDataAvail;
    if (!reqFn) {
        MPIR_Assert(MPIDI_Request_get_type(sreq) != MPIDI_REQUEST_TYPE_GET_RESP);
        mpi_errno = MPID_Request_complete(sreq);
        *complete = 1;
    }
    else {
        mpi_errno = reqFn(vc, sreq, complete);
    }
    if (mpi_errno != MPI_SUCCESS) {
        MPIR_ERR_POP(mpi_errno);
    }

  fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPIDI_CH3U_HANDLE_SEND_REQ);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:NexMirror，项目名称:MPICH，代码行数:29，代码来源:ch3u_handle_send_req.c

示例13: MPID_Comm_connect

int MPID_Comm_connect(const char *port_name, MPIR_Info * info, int root, MPIR_Comm * comm,
                      MPIR_Comm ** newcomm_ptr)
{
    int mpi_errno = MPI_SUCCESS;
    int timeout = MPIR_CVAR_CH4_COMM_CONNECT_TIMEOUT;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPID_COMM_CONNECT);
    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPID_COMM_CONNECT);

    if (info != NULL) {
        int info_flag = 0;
        char info_value[MPI_MAX_INFO_VAL + 1];
        MPIR_Info_get_impl(info, "timeout", MPI_MAX_INFO_VAL, info_value, &info_flag);
        if (info_flag) {
            timeout = atoi(info_value);
        }
    }
    mpi_errno = MPIDI_NM_mpi_comm_connect(port_name, info, root, timeout, comm, newcomm_ptr);

    if (mpi_errno != MPI_SUCCESS) {
        MPIR_ERR_POP(mpi_errno);
    }

  fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPID_COMM_CONNECT);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:jeffhammond，项目名称:mpich，代码行数:28，代码来源:ch4_spawn.c

示例14: MPIDI_CH3U_Post_data_receive_unexpected

int MPIDI_CH3U_Post_data_receive_unexpected(MPIR_Request * rreq)
{
    int mpi_errno = MPI_SUCCESS;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPIDI_CH3U_POST_DATA_RECEIVE_UNEXPECTED);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPIDI_CH3U_POST_DATA_RECEIVE_UNEXPECTED);

    /* FIXME: to improve performance, allocate temporary buffer from a 
       specialized buffer pool. */
    /* FIXME: to avoid memory exhaustion, integrate buffer pool management
       with flow control */
    MPL_DBG_MSG(MPIDI_CH3_DBG_OTHER,VERBOSE,"unexpected request allocated");
    
    rreq->dev.tmpbuf = MPL_malloc(rreq->dev.recv_data_sz, MPL_MEM_BUFFER);
    if (!rreq->dev.tmpbuf) {
	MPIR_ERR_SETANDJUMP1(mpi_errno,MPI_ERR_OTHER,"**nomem","**nomem %d",
			     rreq->dev.recv_data_sz);
    }
    rreq->dev.tmpbuf_sz = rreq->dev.recv_data_sz;
    
    rreq->dev.iov[0].MPL_IOV_BUF = (MPL_IOV_BUF_CAST)rreq->dev.tmpbuf;
    rreq->dev.iov[0].MPL_IOV_LEN = rreq->dev.recv_data_sz;
    rreq->dev.iov_count = 1;
    rreq->dev.OnDataAvail = MPIDI_CH3_ReqHandler_UnpackUEBufComplete;
    rreq->dev.recv_pending_count = 2;

 fn_fail:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPIDI_CH3U_POST_DATA_RECEIVE_UNEXPECTED);
    return mpi_errno;
}

开发者ID:ParaStation，项目名称:psmpi2，代码行数:30，代码来源:ch3u_handle_recv_pkt.c

示例15: MPIDI_CH3U_Handle_ordered_recv_pkt

int MPIDI_CH3U_Handle_ordered_recv_pkt(MPIDI_VC_t * vc, MPIDI_CH3_Pkt_t * pkt, void *data,
				       intptr_t *buflen, MPIR_Request ** rreqp)
{
    int mpi_errno = MPI_SUCCESS;
    static MPIDI_CH3_PktHandler_Fcn *pktArray[MPIDI_CH3_PKT_END_CH3+1];
    static int needsInit = 1;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPIDI_CH3U_HANDLE_ORDERED_RECV_PKT);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPIDI_CH3U_HANDLE_ORDERED_RECV_PKT);

    MPL_DBG_STMT(MPIDI_CH3_DBG_OTHER,VERBOSE,MPIDI_DBG_Print_packet(pkt));

    /* FIXME: We can turn this into something like

       MPIR_Assert(pkt->type <= MAX_PACKET_TYPE);
       mpi_errno = MPIDI_CH3_ProgressFunctions[pkt->type](vc,pkt,rreqp);
       
       in the progress engine itself.  Then this routine is not necessary.
    */

    if (needsInit) {
	MPIDI_CH3_PktHandler_Init( pktArray, MPIDI_CH3_PKT_END_CH3 );
	needsInit = 0;
    }
    /* Packet type is an enum and hence >= 0 */
    MPIR_Assert(pkt->type <= MPIDI_CH3_PKT_END_CH3);
    mpi_errno = pktArray[pkt->type](vc, pkt, data, buflen, rreqp);

    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPIDI_CH3U_HANDLE_ORDERED_RECV_PKT);
    return mpi_errno;
}

开发者ID:ParaStation，项目名称:psmpi2，代码行数:31，代码来源:ch3u_handle_recv_pkt.c

示例16: MPIDU_Ftb_init

int MPIDU_Ftb_init(void)
{
    int mpi_errno = MPI_SUCCESS;
    int ret;
    FTB_client_t ci;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPIDU_FTB_INIT);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPIDU_FTB_INIT);

    MPL_strncpy(ci.event_space, "ftb.mpi.mpich", sizeof(ci.event_space));
    MPL_strncpy(ci.client_name, "mpich " MPICH_VERSION, sizeof(ci.client_name));
    MPL_strncpy(ci.client_subscription_style, "FTB_SUBSCRIPTION_NONE", sizeof(ci.client_subscription_style));
    ci.client_polling_queue_len = -1;
    
#ifdef USE_PMI2_API
    ret = PMI2_Job_GetId(ci.client_jobid, sizeof(ci.client_jobid));
    MPIR_ERR_CHKANDJUMP(ret, mpi_errno, MPI_ERR_OTHER, "**pmi_jobgetid");
#else
    ret = PMI_KVS_Get_my_name(ci.client_jobid, sizeof(ci.client_jobid));
    MPIR_ERR_CHKANDJUMP(ret, mpi_errno, MPI_ERR_OTHER, "**pmi_get_id");
#endif
    
    ret = FTB_Connect(&ci, &client_handle);
    MPIR_ERR_CHKANDJUMP(ret, mpi_errno, MPI_ERR_OTHER, "**ftb_connect");

    ret = FTB_Declare_publishable_events(client_handle, NULL, event_info, sizeof(event_info) / sizeof(event_info[0]));
    MPIR_ERR_CHKANDJUMP(ret, mpi_errno, MPI_ERR_OTHER, "**ftb_declare_publishable_events");

fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPIDU_FTB_INIT);
    return mpi_errno;
fn_fail:
    goto fn_exit;
}

开发者ID:NexMirror，项目名称:MPICH，代码行数:34，代码来源:ftb.c

示例17: handler_recv_unpack_complete

static int handler_recv_unpack_complete(const ptl_event_t *e)
{
    int mpi_errno = MPI_SUCCESS;
    MPIR_Request *const rreq = e->user_ptr;
    void *buf;
    MPI_Aint last;

    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_HANDLER_RECV_UNPACK_COMPLETE);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_HANDLER_RECV_UNPACK_COMPLETE);
    
    MPIR_Assert(e->type == PTL_EVENT_REPLY || e->type == PTL_EVENT_PUT || e->type == PTL_EVENT_PUT_OVERFLOW);

    if (e->type == PTL_EVENT_PUT_OVERFLOW)
        buf = e->start;
    else
        buf = REQ_PTL(rreq)->chunk_buffer[0];

    last = rreq->dev.segment_first + e->mlength;
    MPIDU_Segment_unpack(rreq->dev.segment_ptr, rreq->dev.segment_first, &last, buf);
    MPIR_Assert(last == rreq->dev.segment_first + e->mlength);
    
    mpi_errno = handler_recv_complete(e);
    if (mpi_errno) MPIR_ERR_POP(mpi_errno);

 fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_HANDLER_RECV_UNPACK_COMPLETE);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:michael-chuvelev，项目名称:mpich，代码行数:31，代码来源:ptl_recv.c

示例18: MPID_nem_ptl_init_id

int MPID_nem_ptl_init_id(MPIDI_VC_t *vc)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_nem_ptl_vc_area *const vc_ptl = VC_PTL(vc);
    char *bc;
    int pmi_errno;
    int val_max_sz;
    MPIR_CHKLMEM_DECL(1);
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPID_NEM_PTL_INIT_ID);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPID_NEM_PTL_INIT_ID);

    pmi_errno = PMI_KVS_Get_value_length_max(&val_max_sz);
    MPIR_ERR_CHKANDJUMP1(pmi_errno, mpi_errno, MPI_ERR_OTHER, "**fail", "**fail %d", pmi_errno);
    MPIR_CHKLMEM_MALLOC(bc, char *, val_max_sz, mpi_errno, "bc");

    mpi_errno = vc->pg->getConnInfo(vc->pg_rank, bc, val_max_sz, vc->pg);
    if (mpi_errno) MPIR_ERR_POP(mpi_errno);

    mpi_errno = MPID_nem_ptl_get_id_from_bc(bc, &vc_ptl->id, &vc_ptl->pt, &vc_ptl->ptg, &vc_ptl->ptc, &vc_ptl->ptr, &vc_ptl->ptrg, &vc_ptl->ptrc);
    if (mpi_errno) MPIR_ERR_POP(mpi_errno);

    vc_ptl->id_initialized = TRUE;

    MPIDI_CHANGE_VC_STATE(vc, ACTIVE);
    
 fn_exit:
    MPIR_CHKLMEM_FREEALL();
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPID_NEM_PTL_INIT_ID);
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:michael-chuvelev，项目名称:mpich，代码行数:33，代码来源:ptl_init.c

示例19: MPID_nem_mxm_vc_destroy

int MPID_nem_mxm_vc_destroy(MPIDI_VC_t * vc)
{
    int mpi_errno = MPI_SUCCESS;

    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MXM_VC_DESTROY);
    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MXM_VC_DESTROY);

    /* Do nothing because
     * finalize is called before vc destroy as result it is not possible
     * to destroy endpoint here
     */
#if 0
    MPID_nem_mxm_vc_area *vc_area = VC_BASE(vc);
    if (vc_area->ctx == vc) {
        mpi_errno = _mxm_disconnect(vc_area->mxm_ep);
        if (mpi_errno)
            MPIR_ERR_POP(mpi_errno);
    }
#endif

  fn_exit:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MXM_VC_DESTROY);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:NexMirror，项目名称:MPICH，代码行数:26，代码来源:mxm_init.c

示例20: MPID_Comm_connect

int MPID_Comm_connect(const char * port_name, MPIR_Info * info, int root,
		      MPIR_Comm * comm, MPIR_Comm ** newcomm_ptr)
{
    int mpi_errno=MPI_SUCCESS;
    MPIR_FUNC_VERBOSE_STATE_DECL(MPID_STATE_MPID_COMM_CONNECT);

    MPIR_FUNC_VERBOSE_ENTER(MPID_STATE_MPID_COMM_CONNECT);

    /* Check to see if we need to setup channel-specific functions
       for handling the port operations */
    if (setupPortFunctions) {
	MPIDI_CH3_PortFnsInit( &portFns );
	setupPortFunctions = 0;
    }

    /* A channel may define its own function and set it in the 
       init check above; such a function may be named MPIDI_CH3_Comm_connect.
       If the function is null, we signal a not-implemented error */
    if (portFns.CommConnect) {
	mpi_errno = portFns.CommConnect( port_name, info, root, comm, 
					 newcomm_ptr );
	if (mpi_errno != MPI_SUCCESS) {
	    MPIR_ERR_POP(mpi_errno);
	}
    }
    else {
	MPIR_ERR_SET(mpi_errno, MPI_ERR_OTHER, "**notimpl" );
    }

 fn_fail:
    MPIR_FUNC_VERBOSE_EXIT(MPID_STATE_MPID_COMM_CONNECT);
    return mpi_errno;
}

开发者ID:jeffhammond，项目名称:mpich，代码行数:33，代码来源:mpid_port.c

注：本文中的MPIR_FUNC_VERBOSE_ENTER函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MPIR_FUNC_VERBOSE_EXIT函数代码示例发布时间：2022-05-30

C++ MPIR_FUNC_TERSE_STATE_DECL函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19242|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10002|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8333|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8702|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8648|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9674|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8633|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8007|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8670|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7541|2022-11-06

客服电话

电子邮件

C++ MPIR_FUNC_VERBOSE_ENTER函数代码示例

示例1: MPIDI_CH3_Req_handler_rma_op_complete

示例2: MPIDU_shm_barrier

示例3: MPIR_FUNC_VERBOSE_STATE_DECL

示例4: create_request

示例5: handle_probe

示例6: handler_recv_complete

示例7: MPID_Rget_accumulate

示例8: MPID_nem_mxm_vc_terminate

示例9: MPID_Close_port

示例10: vc_terminate

示例11: MPID_Open_port

示例12: MPIDI_CH3U_Handle_send_req

示例13: MPID_Comm_connect

示例14: MPIDI_CH3U_Post_data_receive_unexpected

示例15: MPIDI_CH3U_Handle_ordered_recv_pkt

示例16: MPIDU_Ftb_init

示例17: handler_recv_unpack_complete

示例18: MPID_nem_ptl_init_id

示例19: MPID_nem_mxm_vc_destroy

示例20: MPID_Comm_connect

请发表评论

全部评论

上一篇：

下一篇：

jcmsalves/kotlin-playground: Kotlin Andr

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053