• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ MOVI2R函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MOVI2R函数的典型用法代码示例。如果您正苦于以下问题:C++ MOVI2R函数的具体用法?C++ MOVI2R怎么用?C++ MOVI2R使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MOVI2R函数的12个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: JITDISABLE

void JitArm::stmw(UGeckoInstruction inst)
{
	INSTRUCTION_START
	JITDISABLE(bJITLoadStoreOff);
	FALLBACK_IF(!Core::g_CoreStartupParameter.bFastmem);

	u32 a = inst.RA;
	ARMReg rA = gpr.GetReg();
	ARMReg rB = gpr.GetReg();
	ARMReg rC = gpr.GetReg();
	MOVI2R(rA, inst.SIMM_16);
	if (a)
		ADD(rA, rA, gpr.R(a));
	Operand2 mask(2, 1); // ~(Memory::MEMVIEW32_MASK)
	BIC(rA, rA, mask); // 3
	MOVI2R(rB, (u32)Memory::base, false); // 4-5
	ADD(rA, rA, rB); // 6

	for (int i = inst.RD; i < 32; i++)
	{
		ARMReg RX = gpr.R(i);
		REV(rC, RX);
		STR(rC, rA, (i - inst.RD) * 4);
	}
	gpr.Unlock(rA, rB, rC);
}
开发者ID:DaneTheory,项目名称:dolphin,代码行数:26,代码来源:JitArm_LoadStore.cpp


示例2: JITDISABLE

void JitArm::stfs(UGeckoInstruction inst)
{
	INSTRUCTION_START
	JITDISABLE(bJITLoadStoreFloatingOff);

	ARMReg rA = gpr.GetReg();
	ARMReg rB = gpr.GetReg();
	ARMReg v0 = fpr.R0(inst.FS);
	VCVT(S0, v0, 0);

	if (inst.RA)
	{
		MOVI2R(rB, inst.SIMM_16);
		ARMReg RA = gpr.R(inst.RA);
		ADD(rB, rB, RA);
	}
	else
	{
		MOVI2R(rB, (u32)inst.SIMM_16);
	}

	MOVI2R(rA, (u32)&Memory::Write_U32);
	PUSH(4, R0, R1, R2, R3);
	VMOV(R0, S0);
	MOV(R1, rB);

	BL(rA);

	POP(4, R0, R1, R2, R3);

	gpr.Unlock(rA, rB);
}
开发者ID:DaneTheory,项目名称:dolphin,代码行数:32,代码来源:JitArm_LoadStoreFloating.cpp


示例3: MOVI2R

void JitArm::UnsafeLoadToReg(ARMReg dest, ARMReg addr, int accessSize, s32 offsetReg, s32 offset)
{
	ARMReg rA = gpr.GetReg();
	if (offsetReg == -1)
	{
		MOVI2R(rA, offset, false); // -3
		ADD(addr, addr, rA); // - 1
	}
	else
	{
		NOP(2); // -3, -2
		// offsetReg is preloaded here
		ADD(addr, addr, gpr.R(offsetReg)); // -1
	}

	// All this gets replaced on backpatch
	Operand2 mask(2, 1); // ~(Memory::MEMVIEW32_MASK)
	BIC(addr, addr, mask); // 1
	MOVI2R(rA, (u32)Memory::base, false); // 2-3
	ADD(addr, addr, rA); // 4
	switch (accessSize)
	{
		case 32:
			LDR(dest, addr); // 5
		break;
		case 16:
			LDRH(dest, addr);
		break;
		case 8:
			LDRB(dest, addr);
		break;
	}
	switch (accessSize)
	{
		case 32:
			REV(dest, dest); // 6
		break;
		case 16:
			REV16(dest, dest);
		break;
		case 8:
			NOP(1);
		break;

	}
	NOP(2); // 7-8
	gpr.Unlock(rA);
}
开发者ID:DaneTheory,项目名称:dolphin,代码行数:48,代码来源:JitArm_LoadStore.cpp


示例4: JITDISABLE

void JitArm::ps_rsqrte(UGeckoInstruction inst)
{
	INSTRUCTION_START
	JITDISABLE(bJITPairedOff);
	FALLBACK_IF(inst.Rc);

	u32 b = inst.FB, d = inst.FD;

	ARMReg vB0 = fpr.R0(b);
	ARMReg vB1 = fpr.R1(b);
	ARMReg vD0 = fpr.R0(d, false);
	ARMReg vD1 = fpr.R1(d, false);
	ARMReg fpscrReg = gpr.GetReg();
	ARMReg V0 = D1;
	ARMReg rA = gpr.GetReg();

	MOVI2R(fpscrReg, (u32)&PPC_NAN);
	VLDR(V0, fpscrReg, 0);
	LDR(fpscrReg, R9, PPCSTATE_OFF(fpscr));

	VCMP(vB0);
	VMRS(_PC);
	FixupBranch Less0 = B_CC(CC_LT);
		VMOV(vD0, V0);
		SetFPException(fpscrReg, FPSCR_VXSQRT);
		FixupBranch SkipOrr0 = B();
	SetJumpTarget(Less0);
	SetCC(CC_EQ);
		ORR(rA, rA, 1);
	SetCC();
	SetJumpTarget(SkipOrr0);

	VCMP(vB1);
	VMRS(_PC);
	FixupBranch Less1 = B_CC(CC_LT);
		VMOV(vD1, V0);
		SetFPException(fpscrReg, FPSCR_VXSQRT);
		FixupBranch SkipOrr1 = B();
	SetJumpTarget(Less1);
	SetCC(CC_EQ);
		ORR(rA, rA, 2);
	SetCC();
	SetJumpTarget(SkipOrr1);

	CMP(rA, 0);
	FixupBranch noException = B_CC(CC_EQ);
	SetFPException(fpscrReg, FPSCR_ZX);
	SetJumpTarget(noException);

	VCVT(S0, vB0, 0);
	VCVT(S1, vB1, 0);

	NEONXEmitter nemit(this);
	nemit.VRSQRTE(F_32, D0, D0);
	VCVT(vD0, S0, 0);
	VCVT(vD1, S1, 0);

	STR(fpscrReg, R9, PPCSTATE_OFF(fpscr));
	gpr.Unlock(fpscrReg, rA);
}
开发者ID:Catnips,项目名称:dolphin,代码行数:60,代码来源:JitArm_Paired.cpp


示例5: SetR0ToEffectiveAddress

	void Jit::SetCCAndR0ForSafeAddress(MIPSGPReg rs, s16 offset, ARMReg tempReg, bool reverse) {
		SetR0ToEffectiveAddress(rs, offset);

		// There are three valid ranges.  Each one gets a bit.
		const u32 BIT_SCRATCH = 1, BIT_RAM = 2, BIT_VRAM = 4;
		MOVI2R(tempReg, BIT_SCRATCH | BIT_RAM | BIT_VRAM);

		CMP(R0, AssumeMakeOperand2(PSP_GetScratchpadMemoryBase()));
		SetCC(CC_LO);
		BIC(tempReg, tempReg, BIT_SCRATCH);
		SetCC(CC_HS);
		CMP(R0, AssumeMakeOperand2(PSP_GetScratchpadMemoryEnd()));
		BIC(tempReg, tempReg, BIT_SCRATCH);

		// If it was in that range, later compares don't matter.
		CMP(R0, AssumeMakeOperand2(PSP_GetVidMemBase()));
		SetCC(CC_LO);
		BIC(tempReg, tempReg, BIT_VRAM);
		SetCC(CC_HS);
		CMP(R0, AssumeMakeOperand2(PSP_GetVidMemEnd()));
		BIC(tempReg, tempReg, BIT_VRAM);

		CMP(R0, AssumeMakeOperand2(PSP_GetKernelMemoryBase()));
		SetCC(CC_LO);
		BIC(tempReg, tempReg, BIT_RAM);
		SetCC(CC_HS);
		CMP(R0, AssumeMakeOperand2(PSP_GetUserMemoryEnd()));
		BIC(tempReg, tempReg, BIT_RAM);

		// If we left any bit set, the address is OK.
		SetCC(CC_AL);
		CMP(tempReg, 0);
		SetCC(reverse ? CC_EQ : CC_GT);
	}
开发者ID:18859966862,项目名称:ppsspp,代码行数:34,代码来源:ArmCompLoadStore.cpp


示例6: mask

void JitArm::UnsafeStoreFromReg(ARMReg dest, ARMReg value, int accessSize, s32 offset)
{
	// All this gets replaced on backpatch
	Operand2 mask(2, 1); // ~(Memory::MEMVIEW32_MASK)
	BIC(dest, dest, mask); // 1
	MOVI2R(R14, (u32)Memory::base, false); // 2-3
	ADD(dest, dest, R14); // 4
	switch (accessSize)
	{
		case 32:
			REV(value, value); // 5
		break;
		case 16:
			REV16(value, value);
		break;
		case 8:
			NOP(1);
		break;
	}
	switch (accessSize)
	{
		case 32:
			STR(value, dest); // 6
		break;
		case 16:
			STRH(value, dest);
		break;
		case 8:
			STRB(value, dest);
		break;
	}
	NOP(1); // 7
}
开发者ID:DaneTheory,项目名称:dolphin,代码行数:33,代码来源:JitArm_LoadStore.cpp


示例7: MOVI2R

	void PPCXEmitter::QuickCallFunction(void *func) {
		/** TODO : can use simple jump **/
		
		u32 func_addr = (u32) func;
		// Load func address
		MOVI2R(R0, func_addr);
		// Set it to link register
		MTCTR(R0);
		// Branch
		BCTRL();
	}
开发者ID:metalex10,项目名称:PPSSPP-X360,代码行数:11,代码来源:ppcEmitter.cpp


示例8: LWBRX

	void PPCXEmitter::LoadFloatSwap(PPCReg FRt, PPCReg Base, PPCReg offset) {
		// used for swapping float ...
		u32 tmp;
		
		// Load Value into a temp REG
		LWBRX(R6, Base, offset); 

		// Save it in tmp
		MOVI2R(R7, (u32)&tmp);
		STW(R6, R7);

		// Load the final value
		LFS(FRt, R7, 0);
	}
开发者ID:metalex10,项目名称:PPSSPP-X360,代码行数:14,代码来源:ppcEmitter.cpp


示例9: ADDI

	void PPCXEmitter::Epilogue() {		
		u32 regSize = 8; // 4 in 32bit system
		u32 stackFrameSize = 0x1F0;

		//Break();

		// Write Epilogue (restore stack frame, return)
		// free stack
		ADDI(R1, R1, stackFrameSize);	
#if 0
		ADDI(R12, R1, -0x98);	

		// Restore fpr
		for(int i = 14; i < 32; i ++) {
			LFD((PPCReg)i, R1, -((32 - i) * regSize));
		}
#endif
		// Restore gpr
		for(int i = 14; i < 32; i ++) {
			LD((PPCReg)i, R1, -((33 - i) * regSize));
		}		

		// recover r12 (LR saved register)
		LWZ (R12, R1, -0x8);

		// Restore Lr
		MTLR(R12);
		
#if 1
		// load fpr buff
		MOVI2R(R5, (u32)&_fprTmp);
		
		// Load fpr
		for(int i = 14; i < 32; i ++) {
			LFD((PPCReg)i, R5, i * regSize);
		}
#endif
	}
开发者ID:metalex10,项目名称:PPSSPP-X360,代码行数:38,代码来源:ppcEmitter.cpp


示例10: MFLR

	void PPCXEmitter::Prologue() {
		// Save regs
		u32 regSize = 8; // 4 in 32bit system
		u32 stackFrameSize = 0x1F0;

		// Write Prologue (setup stack frame etc ...)
		// Save Lr
		MFLR(R12);

		// Save gpr
		for(int i = 14; i < 32; i ++) {
			STD((PPCReg)i, R1, -((33 - i) * regSize));
		}

		// Save r12
		STW(R12, R1, -0x8);
#if 0
		// add fpr frame
		ADDI(R12, R1, -0x98);
		
		// Load fpr
		for(int i = 14; i < 32; i ++) {
			SFD((PPCReg)i, R1, -((32 - i) * regSize));
		}
#endif
		// allocate stack
		STWU(R1, R1, -stackFrameSize);		

#if 1
		// load fpr buff
		MOVI2R(R10, (u32)&_fprTmp);
		
		// Save fpr
		for(int i = 14; i < 32; i ++) {
			SFD((PPCReg)i, R10, i * regSize);
		}
#endif
	}
开发者ID:metalex10,项目名称:PPSSPP-X360,代码行数:38,代码来源:ppcEmitter.cpp


示例11: switch

void Jit::Comp_FPULS(u32 op)
{
	CONDITIONAL_DISABLE;

	s32 offset = (s16)(op & 0xFFFF);
	int ft = _FT;
	int rs = _RS;
	// u32 addr = R(rs) + offset;
	// logBlocks = 1;
	bool doCheck = false;
	switch(op >> 26)
	{
	case 49: //FI(ft) = Memory::Read_U32(addr); break; //lwc1
		fpr.MapReg(ft, MAP_NOINIT | MAP_DIRTY);
		if (gpr.IsImm(rs)) {
			u32 addr = (offset + gpr.GetImm(rs)) & 0x3FFFFFFF;
			MOVI2R(R0, addr + (u32)Memory::base);
		} else {
			gpr.MapReg(rs);
			if (g_Config.bFastMemory) {
				SetR0ToEffectiveAddress(rs, offset);
			} else {
				SetCCAndR0ForSafeAddress(rs, offset, R1);
				doCheck = true;
			}
			ADD(R0, R0, R11);
		}
		VLDR(fpr.R(ft), R0, 0);
		if (doCheck) {
			SetCC(CC_EQ);
			MOVI2R(R0, 0);
			VMOV(fpr.R(ft), R0);
			SetCC(CC_AL);
		}
		break;

	case 57: //Memory::Write_U32(FI(ft), addr); break; //swc1
		fpr.MapReg(ft);
		if (gpr.IsImm(rs)) {
			u32 addr = (offset + gpr.GetImm(rs)) & 0x3FFFFFFF;
			MOVI2R(R0, addr + (u32)Memory::base);
		} else {
			gpr.MapReg(rs);
			if (g_Config.bFastMemory) {
				SetR0ToEffectiveAddress(rs, offset);
			} else {
				SetCCAndR0ForSafeAddress(rs, offset, R1);
				doCheck = true;
			}
			ADD(R0, R0, R11);
		}
		VSTR(fpr.R(ft), R0, 0);
		if (doCheck) {
			SetCC(CC_AL);
		}
		break;

	default:
		Comp_Generic(op);
		return;
	}
}
开发者ID:jack00,项目名称:ppsspp,代码行数:62,代码来源:ArmCompFPU.cpp


示例12: MOVI2R

void Jit::Comp_FPUComp(u32 op) {
	CONDITIONAL_DISABLE;
	int opc = op & 0xF;
	if (opc >= 8) opc -= 8; // alias
	if (opc == 0)//f, sf (signalling false)
	{
		MOVI2R(R0, 0);
		STR(R0, CTXREG, offsetof(MIPSState, fpcond));
		return;
	}

	int fs = _FS;
	int ft = _FT;
	fpr.MapInIn(fs, ft);
	VCMP(fpr.R(fs), fpr.R(ft));
	VMRS_APSR(); // Move FP flags from FPSCR to APSR (regular flags).
	switch(opc)
	{
	case 1:      // un,  ngle (unordered)
		SetCC(CC_VS);
		MOVI2R(R0, 1);
		SetCC(CC_VC);
		break;
	case 2:      // eq,  seq (equal, ordered)
		SetCC(CC_EQ);
		MOVI2R(R0, 1);
		SetCC(CC_NEQ);
		break;
	case 3:      // ueq, ngl (equal, unordered)
		SetCC(CC_EQ);
		MOVI2R(R0, 1);
		SetCC(CC_NEQ);
		MOVI2R(R0, 0);
		SetCC(CC_VS);
		MOVI2R(R0, 1);
		SetCC(CC_AL);
		STR(R0, CTXREG, offsetof(MIPSState, fpcond));
		return;
	case 4:      // olt, lt (less than, ordered)
		SetCC(CC_LO);
		MOVI2R(R0, 1);
		SetCC(CC_HS);
		break;
	case 5:      // ult, nge (less than, unordered)
		SetCC(CC_LT);
		MOVI2R(R0, 1);
		SetCC(CC_GE);
		break;
	case 6:      // ole, le (less equal, ordered)
		SetCC(CC_LS);
		MOVI2R(R0, 1);
		SetCC(CC_HI);
		break;
	case 7:      // ule, ngt (less equal, unordered)
		SetCC(CC_LE);
		MOVI2R(R0, 1);
		SetCC(CC_GT);
		break;
	default:
		Comp_Generic(op);
		return;
	}
	MOVI2R(R0, 0);
	SetCC(CC_AL);
	STR(R0, CTXREG, offsetof(MIPSState, fpcond));
}
开发者ID:jack00,项目名称:ppsspp,代码行数:66,代码来源:ArmCompFPU.cpp



注:本文中的MOVI2R函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MOZ_ARRAY_LENGTH函数代码示例发布时间:2022-05-30
下一篇:
C++ MORK_USED_1函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap