• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ MLX5_GET函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MLX5_GET函数的典型用法代码示例。如果您正苦于以下问题:C++ MLX5_GET函数的具体用法?C++ MLX5_GET怎么用?C++ MLX5_GET使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MLX5_GET函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mlx5_query_port_mtu

static int mlx5_query_port_mtu(struct mlx5_core_dev *dev,
			       int *admin_mtu, int *max_mtu, int *oper_mtu)
{
	u32 in[MLX5_ST_SZ_DW(pmtu_reg)];
	u32 out[MLX5_ST_SZ_DW(pmtu_reg)];
	int err;

	memset(in, 0, sizeof(in));

	MLX5_SET(pmtu_reg, in, local_port, 1);

	err = mlx5_core_access_reg(dev, in, sizeof(in), out,
				   sizeof(out), MLX5_REG_PMTU, 0, 0);
	if (err)
		return err;

	if (max_mtu)
		*max_mtu  = MLX5_GET(pmtu_reg, out, max_mtu);
	if (oper_mtu)
		*oper_mtu = MLX5_GET(pmtu_reg, out, oper_mtu);
	if (admin_mtu)
		*admin_mtu = MLX5_GET(pmtu_reg, out, admin_mtu);

	return 0;
}
开发者ID:Dyoed,项目名称:ath,代码行数:25,代码来源:port.c


示例2: mlx5_reg_mcqi_query

static int mlx5_reg_mcqi_query(struct mlx5_core_dev *dev,
			       u16 component_index,
			       u32 *max_component_size,
			       u8 *log_mcda_word_size,
			       u16 *mcda_max_write_size)
{
	u32 out[MLX5_ST_SZ_DW(mcqi_reg) + MLX5_ST_SZ_DW(mcqi_cap)];
	int offset = MLX5_ST_SZ_DW(mcqi_reg);
	u32 in[MLX5_ST_SZ_DW(mcqi_reg)];
	int err;

	memset(in, 0, sizeof(in));
	memset(out, 0, sizeof(out));

	MLX5_SET(mcqi_reg, in, component_index, component_index);
	MLX5_SET(mcqi_reg, in, data_size, MLX5_ST_SZ_BYTES(mcqi_cap));

	err = mlx5_core_access_reg(dev, in, sizeof(in), out,
				   sizeof(out), MLX5_REG_MCQI, 0, 0);
	if (err)
		goto out;

	*max_component_size = MLX5_GET(mcqi_cap, out + offset, max_component_size);
	*log_mcda_word_size = MLX5_GET(mcqi_cap, out + offset, log_mcda_word_size);
	*mcda_max_write_size = MLX5_GET(mcqi_cap, out + offset, mcda_max_write_size);

out:
	return err;
}
开发者ID:ReneNyffenegger,项目名称:linux,代码行数:29,代码来源:fw.c


示例3: mlx5_wq_cyc_create

int mlx5_wq_cyc_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param,
		       void *wqc, struct mlx5_wq_cyc *wq,
		       struct mlx5_wq_ctrl *wq_ctrl)
{
	int err;

	wq->log_stride = MLX5_GET(wq, wqc, log_wq_stride);
	wq->sz_m1 = (1 << MLX5_GET(wq, wqc, log_wq_sz)) - 1;

	err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node);
	if (err) {
		mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err);
		return err;
	}

	err = mlx5_buf_alloc_node(mdev, mlx5_wq_cyc_get_byte_size(wq),
				  &wq_ctrl->buf, param->buf_numa_node);
	if (err) {
		mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err);
		goto err_db_free;
	}

	wq->buf = wq_ctrl->buf.direct.buf;
	wq->db  = wq_ctrl->db.db;

	wq_ctrl->mdev = mdev;

	return 0;

err_db_free:
	mlx5_db_free(mdev, &wq_ctrl->db);

	return err;
}
开发者ID:513855417,项目名称:linux,代码行数:34,代码来源:wq.c


示例4: mlx5_nic_vport_query_local_lb

int mlx5_nic_vport_query_local_lb(struct mlx5_core_dev *mdev, bool *status)
{
	int outlen = MLX5_ST_SZ_BYTES(query_nic_vport_context_out);
	u32 *out;
	int value;
	int err;

	out = kzalloc(outlen, GFP_KERNEL);
	if (!out)
		return -ENOMEM;

	err = mlx5_query_nic_vport_context(mdev, 0, out, outlen);
	if (err)
		goto out;

	value = MLX5_GET(query_nic_vport_context_out, out,
			 nic_vport_context.disable_mc_local_lb) << MC_LOCAL_LB;

	value |= MLX5_GET(query_nic_vport_context_out, out,
			  nic_vport_context.disable_uc_local_lb) << UC_LOCAL_LB;

	*status = !value;

out:
	kfree(out);
	return err;
}
开发者ID:Anjali05,项目名称:linux,代码行数:27,代码来源:vport.c


示例5: mlx5_query_nic_vport_promisc

int mlx5_query_nic_vport_promisc(struct mlx5_core_dev *mdev,
				 u16 vport,
				 int *promisc_uc,
				 int *promisc_mc,
				 int *promisc_all)
{
	u32 *out;
	int outlen = MLX5_ST_SZ_BYTES(query_nic_vport_context_out);
	int err;

	out = kzalloc(outlen, GFP_KERNEL);
	if (!out)
		return -ENOMEM;

	err = mlx5_query_nic_vport_context(mdev, vport, out, outlen);
	if (err)
		goto out;

	*promisc_uc = MLX5_GET(query_nic_vport_context_out, out,
			       nic_vport_context.promisc_uc);
	*promisc_mc = MLX5_GET(query_nic_vport_context_out, out,
			       nic_vport_context.promisc_mc);
	*promisc_all = MLX5_GET(query_nic_vport_context_out, out,
				nic_vport_context.promisc_all);

out:
	kfree(out);
	return err;
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:29,代码来源:mlx5_vport.c


示例6: mlx5_nic_vport_query_local_lb

int mlx5_nic_vport_query_local_lb(struct mlx5_core_dev *mdev,
				  enum mlx5_local_lb_selection selection,
				  u8 *value)
{
	void *out;
	int outlen = MLX5_ST_SZ_BYTES(query_nic_vport_context_out);
	int err;

	out = kzalloc(outlen, GFP_KERNEL);
	if (!out)
		return -ENOMEM;

	err = mlx5_query_nic_vport_context(mdev, 0, out, outlen);
	if (err)
		goto done;

	if (selection == MLX5_LOCAL_MC_LB)
		*value = MLX5_GET(query_nic_vport_context_out, out,
				  nic_vport_context.disable_mc_local_lb);
	else
		*value = MLX5_GET(query_nic_vport_context_out, out,
				  nic_vport_context.disable_uc_local_lb);

done:
	kfree(out);
	return err;
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:27,代码来源:mlx5_vport.c


示例7: mlx5_query_nic_vport_vlans

int mlx5_query_nic_vport_vlans(struct mlx5_core_dev *dev,
			       u32 vport,
			       u16 vlans[],
			       int *size)
{
	u32 in[MLX5_ST_SZ_DW(query_nic_vport_context_in)];
	void *nic_vport_ctx;
	int req_list_size;
	int max_list_size;
	int out_sz;
	void *out;
	int err;
	int i;

	req_list_size = *size;
	max_list_size = 1 << MLX5_CAP_GEN(dev, log_max_vlan_list);
	if (req_list_size > max_list_size) {
		mlx5_core_warn(dev, "Requested list size (%d) > (%d) max list size\n",
			       req_list_size, max_list_size);
		req_list_size = max_list_size;
	}

	out_sz = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in) +
			req_list_size * MLX5_ST_SZ_BYTES(vlan_layout);

	memset(in, 0, sizeof(in));
	out = kzalloc(out_sz, GFP_KERNEL);
	if (!out)
		return -ENOMEM;

	MLX5_SET(query_nic_vport_context_in, in, opcode,
		 MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT);
	MLX5_SET(query_nic_vport_context_in, in, allowed_list_type,
		 MLX5_NVPRT_LIST_TYPE_VLAN);
	MLX5_SET(query_nic_vport_context_in, in, vport_number, vport);

	if (vport)
		MLX5_SET(query_nic_vport_context_in, in, other_vport, 1);

	err = mlx5_cmd_exec_check_status(dev, in, sizeof(in), out, out_sz);
	if (err)
		goto out;

	nic_vport_ctx = MLX5_ADDR_OF(query_nic_vport_context_out, out,
				     nic_vport_context);
	req_list_size = MLX5_GET(nic_vport_context, nic_vport_ctx,
				 allowed_list_size);

	*size = req_list_size;
	for (i = 0; i < req_list_size; i++) {
		void *vlan_addr = MLX5_ADDR_OF(nic_vport_context,
					       nic_vport_ctx,
					       current_uc_mac_address[i]);
		vlans[i] = MLX5_GET(vlan_layout, vlan_addr, vlan);
	}
out:
	kfree(out);
	return err;
}
开发者ID:513855417,项目名称:linux,代码行数:59,代码来源:vport.c


示例8: get_pas_size

static int get_pas_size(void *srqc)
{
	u32 log_page_size = MLX5_GET(srqc, srqc, log_page_size) + 12;
	u32 log_srq_size  = MLX5_GET(srqc, srqc, log_srq_size);
	u32 log_rq_stride = MLX5_GET(srqc, srqc, log_rq_stride);
	u32 page_offset   = MLX5_GET(srqc, srqc, page_offset);
	u32 po_quanta	  = 1 << (log_page_size - 6);
	u32 rq_sz	  = 1 << (log_srq_size + 4 + log_rq_stride);
	u32 page_size	  = 1 << log_page_size;
	u32 rq_sz_po      = rq_sz + (page_offset * po_quanta);
	u32 rq_num_pas	  = (rq_sz_po + page_size - 1) / page_size;

	return rq_num_pas * sizeof(u64);

}
开发者ID:2trill2spill,项目名称:freebsd,代码行数:15,代码来源:mlx5_srq.c


示例9: query_srq_cmd

static int query_srq_cmd(struct mlx5_core_dev *dev, struct mlx5_core_srq *srq,
			 struct mlx5_srq_attr *out)
{
	u32 srq_in[MLX5_ST_SZ_DW(query_srq_in)] = {0};
	u32 *srq_out;
	void *srqc;
	int outlen = MLX5_ST_SZ_BYTES(query_srq_out);
	int err;

	srq_out = mlx5_vzalloc(MLX5_ST_SZ_BYTES(query_srq_out));
	if (!srq_out)
		return -ENOMEM;

	MLX5_SET(query_srq_in, srq_in, opcode, MLX5_CMD_OP_QUERY_SRQ);
	MLX5_SET(query_srq_in, srq_in, srqn, srq->srqn);
	err =  mlx5_cmd_exec(dev, srq_in, sizeof(srq_in), srq_out, outlen);
	if (err)
		goto out;

	srqc = MLX5_ADDR_OF(query_srq_out, srq_out, srq_context_entry);
	get_srqc(srqc, out);
	if (MLX5_GET(srqc, srqc, state) != MLX5_SRQC_STATE_GOOD)
		out->flags |= MLX5_SRQ_FLAG_ERR;
out:
	kvfree(srq_out);
	return err;
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:27,代码来源:mlx5_srq.c


示例10: query_xrc_srq_cmd

static int query_xrc_srq_cmd(struct mlx5_core_dev *dev,
			     struct mlx5_core_srq *srq,
			     struct mlx5_srq_attr *out)
{
	u32 *xrcsrq_out;
	void *xrc_srqc;
	int err;

	xrcsrq_out = mlx5_vzalloc(MLX5_ST_SZ_BYTES(query_xrc_srq_out));
	if (!xrcsrq_out)
		return -ENOMEM;

	err = mlx5_core_query_xsrq(dev, srq->srqn, xrcsrq_out);
	if (err)
		goto out;

	xrc_srqc = MLX5_ADDR_OF(query_xrc_srq_out, xrcsrq_out,
				xrc_srq_context_entry);
	get_srqc(xrc_srqc, out);
	if (MLX5_GET(xrc_srqc, xrc_srqc, state) != MLX5_XRC_SRQC_STATE_GOOD)
		out->flags |= MLX5_SRQ_FLAG_ERR;

out:
	kvfree(xrcsrq_out);
	return err;
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:26,代码来源:mlx5_srq.c


示例11: query_xrc_srq_cmd

static int query_xrc_srq_cmd(struct mlx5_core_dev *dev,
			     struct mlx5_core_srq *srq,
			     struct mlx5_srq_attr *out)
{
	u32 xrcsrq_in[MLX5_ST_SZ_DW(query_xrc_srq_in)];
	u32 *xrcsrq_out;
	void *xrc_srqc;
	int err;

	xrcsrq_out = kvzalloc(MLX5_ST_SZ_BYTES(query_xrc_srq_out), GFP_KERNEL);
	if (!xrcsrq_out)
		return -ENOMEM;
	memset(xrcsrq_in, 0, sizeof(xrcsrq_in));

	MLX5_SET(query_xrc_srq_in, xrcsrq_in, opcode,
		 MLX5_CMD_OP_QUERY_XRC_SRQ);
	MLX5_SET(query_xrc_srq_in, xrcsrq_in, xrc_srqn, srq->srqn);

	err =  mlx5_cmd_exec(dev, xrcsrq_in, sizeof(xrcsrq_in), xrcsrq_out,
			     MLX5_ST_SZ_BYTES(query_xrc_srq_out));
	if (err)
		goto out;

	xrc_srqc = MLX5_ADDR_OF(query_xrc_srq_out, xrcsrq_out,
				xrc_srq_context_entry);
	get_srqc(xrc_srqc, out);
	if (MLX5_GET(xrc_srqc, xrc_srqc, state) != MLX5_XRC_SRQC_STATE_GOOD)
		out->flags |= MLX5_SRQ_FLAG_ERR;

out:
	kvfree(xrcsrq_out);
	return err;
}
开发者ID:ezequielgarcia,项目名称:linux,代码行数:33,代码来源:srq.c


示例12: mlx5_cmd_force_teardown_hca

int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev)
{
	u32 out[MLX5_ST_SZ_DW(teardown_hca_out)] = {0};
	u32 in[MLX5_ST_SZ_DW(teardown_hca_in)] = {0};
	int force_state;
	int ret;

	if (!MLX5_CAP_GEN(dev, force_teardown)) {
		mlx5_core_dbg(dev, "force teardown is not supported in the firmware\n");
		return -EOPNOTSUPP;
	}

	MLX5_SET(teardown_hca_in, in, opcode, MLX5_CMD_OP_TEARDOWN_HCA);
	MLX5_SET(teardown_hca_in, in, profile, MLX5_TEARDOWN_HCA_IN_PROFILE_FORCE_CLOSE);

	ret = mlx5_cmd_exec_polling(dev, in, sizeof(in), out, sizeof(out));
	if (ret)
		return ret;

	force_state = MLX5_GET(teardown_hca_out, out, force_state);
	if (force_state == MLX5_TEARDOWN_HCA_OUT_FORCE_STATE_FAIL)  {
		mlx5_core_err(dev, "teardown with force mode failed\n");
		return -EIO;
	}

	return 0;
}
开发者ID:derekmarcotte,项目名称:freebsd,代码行数:27,代码来源:mlx5_fw.c


示例13: create_srq_cmd

static int create_srq_cmd(struct mlx5_core_dev *dev, struct mlx5_core_srq *srq,
			  struct mlx5_srq_attr *in)
{
	u32 create_out[MLX5_ST_SZ_DW(create_srq_out)] = {0};
	void *create_in;
	void *srqc;
	void *pas;
	int pas_size;
	int inlen;
	int err;

	pas_size  = get_pas_size(in);
	inlen	  = MLX5_ST_SZ_BYTES(create_srq_in) + pas_size;
	create_in = mlx5_vzalloc(inlen);
	if (!create_in)
		return -ENOMEM;

	srqc = MLX5_ADDR_OF(create_srq_in, create_in, srq_context_entry);
	pas = MLX5_ADDR_OF(create_srq_in, create_in, pas);

	set_srqc(srqc, in);
	memcpy(pas, in->pas, pas_size);

	MLX5_SET(create_srq_in, create_in, opcode, MLX5_CMD_OP_CREATE_SRQ);
	err = mlx5_cmd_exec(dev, create_in, inlen, create_out, sizeof(create_out));
	kvfree(create_in);
	if (!err)
		srq->srqn = MLX5_GET(create_srq_out, create_out, srqn);

	return err;
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:31,代码来源:mlx5_srq.c


示例14: mlx5_wq_qp_create

int mlx5_wq_qp_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param,
		      void *qpc, struct mlx5_wq_qp *wq,
		      struct mlx5_wq_ctrl *wq_ctrl)
{
	u16 sq_strides_offset;
	u32 rq_pg_remainder;
	int err;

	mlx5_fill_fbc(MLX5_GET(qpc, qpc, log_rq_stride) + 4,
		      MLX5_GET(qpc, qpc, log_rq_size),
		      &wq->rq.fbc);

	rq_pg_remainder   = mlx5_wq_cyc_get_byte_size(&wq->rq) % PAGE_SIZE;
	sq_strides_offset = rq_pg_remainder / MLX5_SEND_WQE_BB;

	mlx5_fill_fbc_offset(ilog2(MLX5_SEND_WQE_BB),
			     MLX5_GET(qpc, qpc, log_sq_size),
			     sq_strides_offset,
			     &wq->sq.fbc);

	err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node);
	if (err) {
		mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err);
		return err;
	}

	err = mlx5_frag_buf_alloc_node(mdev, mlx5_wq_qp_get_byte_size(wq),
				       &wq_ctrl->buf, param->buf_numa_node);
	if (err) {
		mlx5_core_warn(mdev, "mlx5_frag_buf_alloc_node() failed, %d\n", err);
		goto err_db_free;
	}

	mlx5_qp_set_frag_buf(&wq_ctrl->buf, wq);

	wq->rq.db  = &wq_ctrl->db.db[MLX5_RCV_DBR];
	wq->sq.db  = &wq_ctrl->db.db[MLX5_SND_DBR];

	wq_ctrl->mdev = mdev;

	return 0;

err_db_free:
	mlx5_db_free(mdev, &wq_ctrl->db);

	return err;
}
开发者ID:Xilinx,项目名称:linux-xlnx,代码行数:47,代码来源:wq.c


示例15: mlx5_fpga_ipsec_counters_read

int mlx5_fpga_ipsec_counters_read(struct mlx5_core_dev *mdev, u64 *counters,
				  unsigned int counters_count)
{
	struct mlx5_fpga_device *fdev = mdev->fpga;
	unsigned int i;
	__be32 *data;
	u32 count;
	u64 addr;
	int ret;

	if (!fdev || !fdev->ipsec)
		return 0;

	addr = (u64)MLX5_GET(ipsec_extended_cap, fdev->ipsec->caps,
			     ipsec_counters_addr_low) +
	       ((u64)MLX5_GET(ipsec_extended_cap, fdev->ipsec->caps,
			     ipsec_counters_addr_high) << 32);

	count = mlx5_fpga_ipsec_counters_count(mdev);

	data = kzalloc(sizeof(*data) * count * 2, GFP_KERNEL);
	if (!data) {
		ret = -ENOMEM;
		goto out;
	}

	ret = mlx5_fpga_mem_read(fdev, count * sizeof(u64), addr, data,
				 MLX5_FPGA_ACCESS_TYPE_DONTCARE);
	if (ret < 0) {
		mlx5_fpga_err(fdev, "Failed to read IPSec counters from HW: %d\n",
			      ret);
		goto out;
	}
	ret = 0;

	if (count > counters_count)
		count = counters_count;

	/* Each counter is low word, then high. But each word is big-endian */
	for (i = 0; i < count; i++)
		counters[i] = (u64)ntohl(data[i * 2]) |
			      ((u64)ntohl(data[i * 2 + 1]) << 32);

out:
	kfree(data);
	return ret;
}
开发者ID:ReneNyffenegger,项目名称:linux,代码行数:47,代码来源:ipsec.c


示例16: mlx5_query_port_pfc

int mlx5_query_port_pfc(struct mlx5_core_dev *dev, u8 *pfc_en_tx, u8 *pfc_en_rx)
{
	u32 out[MLX5_ST_SZ_DW(pfcc_reg)];
	int err;

	err = mlx5_query_pfcc_reg(dev, out, sizeof(out));
	if (err)
		return err;

	if (pfc_en_tx)
		*pfc_en_tx = MLX5_GET(pfcc_reg, out, pfctx);

	if (pfc_en_rx)
		*pfc_en_rx = MLX5_GET(pfcc_reg, out, pfcrx);

	return 0;
}
开发者ID:Anjali05,项目名称:linux,代码行数:17,代码来源:port.c


示例17: mlx5_query_port_proto_admin

int mlx5_query_port_proto_admin(struct mlx5_core_dev *dev,
				u32 *proto_admin, int proto_mask)
{
	u32 out[MLX5_ST_SZ_DW(ptys_reg)];
	int err;

	err = mlx5_query_port_ptys(dev, out, sizeof(out), proto_mask, 1);
	if (err)
		return err;

	if (proto_mask == MLX5_PTYS_EN)
		*proto_admin = MLX5_GET(ptys_reg, out, eth_proto_admin);
	else
		*proto_admin = MLX5_GET(ptys_reg, out, ib_proto_admin);

	return 0;
}
开发者ID:c444b774,项目名称:linux,代码行数:17,代码来源:port.c


示例18: mlx5_query_port_autoneg

void mlx5_query_port_autoneg(struct mlx5_core_dev *dev, int proto_mask,
			     u8 *an_status,
			     u8 *an_disable_cap, u8 *an_disable_admin)
{
	u32 out[MLX5_ST_SZ_DW(ptys_reg)];

	*an_status = 0;
	*an_disable_cap = 0;
	*an_disable_admin = 0;

	if (mlx5_query_port_ptys(dev, out, sizeof(out), proto_mask, 1))
		return;

	*an_status = MLX5_GET(ptys_reg, out, an_status);
	*an_disable_cap = MLX5_GET(ptys_reg, out, an_disable_cap);
	*an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
}
开发者ID:oscardagrach,项目名称:linux,代码行数:17,代码来源:port.c


示例19: mlx5_query_vport_admin_state

u8 mlx5_query_vport_admin_state(struct mlx5_core_dev *mdev, u8 opmod, u16 vport)
{
	u32 out[MLX5_ST_SZ_DW(query_vport_state_out)] = {0};

	_mlx5_query_vport_state(mdev, opmod, vport, out, sizeof(out));

	return MLX5_GET(query_vport_state_out, out, admin_state);
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:8,代码来源:mlx5_vport.c


示例20: mlx5_query_port_mtu

static void mlx5_query_port_mtu(struct mlx5_core_dev *dev, u16 *admin_mtu,
				u16 *max_mtu, u16 *oper_mtu, u8 port)
{
	u32 in[MLX5_ST_SZ_DW(pmtu_reg)] = {0};
	u32 out[MLX5_ST_SZ_DW(pmtu_reg)];

	MLX5_SET(pmtu_reg, in, local_port, port);
	mlx5_core_access_reg(dev, in, sizeof(in), out,
			     sizeof(out), MLX5_REG_PMTU, 0, 0);

	if (max_mtu)
		*max_mtu  = MLX5_GET(pmtu_reg, out, max_mtu);
	if (oper_mtu)
		*oper_mtu = MLX5_GET(pmtu_reg, out, oper_mtu);
	if (admin_mtu)
		*admin_mtu = MLX5_GET(pmtu_reg, out, admin_mtu);
}
开发者ID:oscardagrach,项目名称:linux,代码行数:17,代码来源:port.c



注:本文中的MLX5_GET函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MLX5_SET函数代码示例发布时间:2022-05-30
下一篇:
C++ MLX5_CAP_GEN函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap