C++ MDFNSS_StateAction函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MDFNSS_StateAction函数的典型用法代码示例。如果您正苦于以下问题：C++ MDFNSS_StateAction函数的具体用法？C++ MDFNSS_StateAction怎么用？C++ MDFNSS_StateAction使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MDFNSS_StateAction函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: StateAction

static int StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[] =
 {
  SFVAR(z80_runtime),
  SFARRAY(CPUExRAM, 16384),
  SFVAR(FlashStatusEnable),
  SFEND
 };

 SFORMAT TLCS_StateRegs[] =
 {
  SFVARN(pc, "PC"),
  SFVARN(sr, "SR"),
  SFVARN(f_dash, "F_DASH"),
  SFARRAY32N(gpr, 4, "GPR"),
  SFARRAY32N(gprBank[0], 4, "GPRB0"),
  SFARRAY32N(gprBank[1], 4, "GPRB1"),
  SFARRAY32N(gprBank[2], 4, "GPRB2"),
  SFARRAY32N(gprBank[3], 4, "GPRB3"),
  SFEND
 };

 if(!MDFNSS_StateAction(sm, load, data_only, StateRegs, "MAIN"))
  return(0);

 if(!MDFNSS_StateAction(sm, load, data_only, TLCS_StateRegs, "TLCS"))
  return(0);

 if(!MDFNNGPCDMA_StateAction(sm, load, data_only))
  return(0);

 if(!MDFNNGPCSOUND_StateAction(sm, load, data_only))
  return(0);

 if(!NGPGfx->StateAction(sm, load, data_only))
  return(0);

 if(!MDFNNGPCZ80_StateAction(sm, load, data_only))
  return(0);

 if(!int_timer_StateAction(sm, load, data_only))
  return(0);

 if(!BIOSHLE_StateAction(sm, load, data_only))
  return(0);

 if(!FLASH_StateAction(sm, load, data_only))
  return(0);

 if(load)
 {
  RecacheFRM();
  changedSP();
 }
 return(1);
}

开发者ID:Nukotan，项目名称:beetle-ngp-libretro，代码行数:57，代码来源:libretro.cpp

示例2: SFVAR

void CMemMap::StateAction(StateMem *sm, const unsigned load, const bool data_only)
{
    SFORMAT MemMapRegs[] =
    {
        SFVAR(mMikieEnabled),
        SFVAR(mSusieEnabled),
        SFVAR(mRomEnabled),
        SFVAR(mVectorsEnabled),
        SFEND
    };
    MDFNSS_StateAction(sm, load, data_only, MemMapRegs, "MMAP");

    if(load)
    {
        // The peek will give us the correct value to put back
        uint8 mystate=Peek(0);

        // Now set to un-initialised so the poke will set correctly
        mSusieEnabled=-1;
        mMikieEnabled=-1;
        mRomEnabled=-1;
        mVectorsEnabled=-1;

        // Set banks correctly
        Poke(0,mystate);
    }
}

开发者ID:Talintid，项目名称:Mednafen-Core，代码行数:27，代码来源:memmap.cpp

示例3: SFVAR

void InputDevice_Gamepad::StateAction(StateMem* sm, const unsigned load, const bool data_only, const char* sname_prefix)
{
 SFORMAT StateRegs[] =
 {
  SFVAR(dtr),

  SFARRAY(buttons, sizeof(buttons)),

  SFVAR(command_phase),
  SFVAR(bitpos),
  SFVAR(receive_buffer),

  SFVAR(command),

  SFARRAY(transmit_buffer, sizeof(transmit_buffer)),
  SFVAR(transmit_pos),
  SFVAR(transmit_count),

  SFEND
 };
 char section_name[32];
 trio_snprintf(section_name, sizeof(section_name), "%s_Gamepad", sname_prefix);

 if(!MDFNSS_StateAction(sm, load, data_only, StateRegs, section_name, true) && load)
  Power();
 else if(load)
 {
  if((transmit_pos + transmit_count) > sizeof(transmit_buffer))
  {
   transmit_pos = 0;
   transmit_count = 0;
  }
 }
}

开发者ID:Oggom，项目名称:mednafen-git，代码行数:34，代码来源:gamepad.cpp

示例4: GBZ80_StateAction

int GBZ80_StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[] =
 {
  SFVAR(PC.W),
  SFVAR(SP.W),
  SFVAR(AF.W),
  SFVAR(BC.W),
  SFVAR(DE.W),
  SFVAR(HL.W),
  SFVAR(IFF),
  SFVAR(InHALT),
  SFVAR(RepeatNextByte),
  SFVAR(EI_Delayed),
  SFEND
 };
 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "CPU");

 if(load)
 {

 }

 return(ret);
}

开发者ID:RobertSzkutak，项目名称:mednafenPSP，代码行数:25，代码来源:z80.cpp

示例5: HuC_StateAction

int HuC_StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[] =
 {
  SFARRAY(PopRAM, IsPopulous ? 32768 : 0),
  SFARRAY(TsushinRAM, IsTsushin ? 32768 : 0),
  SFARRAY(SaveRAM, (IsPopulous || IsTsushin || BRAM_Disabled) ? 0 : 2048),
  SFARRAY(CDRAM, CDRAM ? (8192 * 8) : 0),
  SFARRAY(SysCardRAM, SysCardRAM ? (8192 * 24) : 0),
  SFVAR(HuCSF2Latch),
  SFEND
 };

 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "HuC");

 if(load)
  HuCSF2Latch &= 0xF;

 if(PCE_IsCD)
 {
  if(arcade_card)
   ret &= arcade_card->StateAction(sm, load, data_only);

  ret &= PCECD_StateAction(sm, load, data_only);
 }

 if(mcg)
  ret &= mcg->StateAction(sm, load, data_only);

 return(ret);
}

开发者ID:beaumanvienna，项目名称:mednafen-git，代码行数:31，代码来源:huc.cpp

示例6: SMS_SoundStateAction

int SMS_SoundStateAction(StateMem *sm, int load, int data_only)
{
 Sms_ApuState sn_state;
 int ret = 1;

 memset(&sn_state, 0, sizeof(Sms_ApuState));

 if(!load)
 {
  apu.save_state(&sn_state);
 }

 SFORMAT StateRegs[] =
 {
  SFARRAY32N(sn_state.volume, 4, "Volume"),
  SFARRAY32N(sn_state.sq_period, 3, "SQPeriod"),
  SFARRAY32N(sn_state.sq_phase, 3, "SQPhase"),
  SFVARN(sn_state.noise_period, "NPeriod"),
  SFVARN(sn_state.noise_shifter, "NShifter"),
  SFVARN(sn_state.noise_feedback, "NFeedback"),
  SFVARN(sn_state.latch, "Latch"),
  SFVARN(sn_state.ggstereo, "GGStereo"),
  SFEND
 };

 if(!MDFNSS_StateAction(sm, load, data_only, StateRegs, "PSG"))
  ret = 0;
 else if(load)
 {
  apu.load_state(&sn_state);
 }
 return(ret);
}

开发者ID:Oggom，项目名称:mednafen-git，代码行数:33，代码来源:sound.cpp

示例7: StateAction

 int StateAction(StateMem *sm, int load, int data_only, const char *sname)
 {
  SFORMAT StateRegs[] = 
  {
   SFARRAY(mem, mem_size),
   SFVAR(prev_sda_in),
   SFVAR(prev_scl_in),
   SFVAR(phase),
   SFVAR(buf),
   SFVAR(bitpos),
   SFVAR(sda_out),

   SFVAR(slave_addr),
   SFVAR(rw_bit),
   SFVAR(mem_addr),

   SFEND
  };
  int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, sname);

  if(load)
  {
   mem_addr &= (mem_size - 1);
  }

  return(ret);
 }

开发者ID:gameblabla，项目名称:mednafen-gcw，代码行数:27，代码来源:16.cpp

示例8: StateAction

static int StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[]={
        {&cmd, 1, "CMD"},
        {&mir, 1, "MIR"},
        {&rmode, 1, "RMOD"},
        {&IRQmode, 1, "IRQM"},
        {&IRQCount, 1, "IRQC"},
        {&IRQa, 1, "IRQA"},
        {&IRQLatch, 1, "IRQL"},
        {DRegs, 11, "DREG"},
        SFEND
 };

 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "MAPR");

 if(load)
 {
  Synco();
  if(!nomirror)
   setmirror(mir^1);
 }

 return(ret);
}

开发者ID:ben401，项目名称:OpenEmu，代码行数:25，代码来源:tengen.cpp

示例9: StateAction

static int StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[] =
 {
  SFARRAY(BaseRAM, IsSGX? 32768 : 8192),
  SFVAR(PCEIODataBuffer),
  SFEND
 };

 //for(int i = 8192; i < 32768; i++)
 // if(BaseRAM[i] != 0xFF)
 //  printf("%d %02x\n", i, BaseRAM[i]);

 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "MAIN");

 ret &= HuC6280_StateAction(sm, load, data_only);
 ret &= VDC_StateAction(sm, load, data_only);
 ret &= psg->StateAction(sm, load, data_only);
 ret &= INPUT_StateAction(sm, load, data_only);
 ret &= HuC_StateAction(sm, load, data_only);

 if(load)
 {

 }

 return(ret);
}

开发者ID:acgleader，项目名称:emu-ex-plus-alpha，代码行数:28，代码来源:pce.cpp

示例10: HuC_StateAction

void HuC_StateAction(StateMem *sm, const unsigned load, const bool data_only)
{
 SFORMAT StateRegs[] =
 {
  SFARRAY(PopRAM, IsPopulous ? 32768 : 0),
  SFARRAY(TsushinRAM, IsTsushin ? 32768 : 0),
  SFARRAY(SaveRAM, (IsPopulous || IsTsushin || BRAM_Disabled) ? 0 : 2048),
  SFARRAY(CDRAM, CDRAM ? (8192 * 8) : 0),
  SFARRAY(SysCardRAM, SysCardRAM ? (8192 * 24) : 0),
  SFVAR(HuCSF2Latch),
  SFEND
 };

 MDFNSS_StateAction(sm, load, data_only, StateRegs, "HuC");

 if(load)
  HuCSF2Latch &= 0xF;

 if(PCE_IsCD)
 {
  if(arcade_card)
   arcade_card->StateAction(sm, load, data_only);

  PCECD_StateAction(sm, load, data_only);
 }

 if(mcg)
  mcg->StateAction(sm, load, data_only);
}

开发者ID:gameblabla，项目名称:mednafen-gcw，代码行数:29，代码来源:huc.cpp

示例11: SFVAR

int InputDevice_Multitap::StateAction(StateMem* sm, int load, int data_only, const char* section_name)
{
 SFORMAT StateRegs[] =
 {
  SFVAR(dtr),

  SFVAR(selected_device),
  SFVAR(full_mode_setting),

  SFVAR(full_mode),
  SFVAR(mc_mode),

  SFVAR(fm_dp),
  SFARRAY(&fm_buffer[0][0], sizeof(fm_buffer) / sizeof(fm_buffer[0][0])),

  SFVAR(fm_deferred_error_temp),
  SFVAR(fm_deferred_error),
  SFVAR(fm_command_error),

  SFVAR(command),
  SFVAR(receive_buffer),
  SFVAR(bit_counter),
  SFVAR(byte_counter),

  SFEND
 };
 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, section_name);

 if(load)
 {

 }

 return(ret);
}

开发者ID:XeresRazor，项目名称:Provenance，代码行数:35，代码来源:multitap.cpp

示例12: SFVAR

int InputDevice_Gamepad::StateAction(StateMem* sm, int load, int data_only, const char* section_name)
{
   SFORMAT StateRegs[] =
   {
      SFVAR(dtr),

      SFARRAY(buttons, sizeof(buttons)),

      SFVAR(command_phase),
      SFVAR(bitpos),
      SFVAR(receive_buffer),

      SFVAR(command),

      SFARRAY(transmit_buffer, sizeof(transmit_buffer)),
      SFVAR(transmit_pos),
      SFVAR(transmit_count),

      SFEND
   };
   int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, section_name);

   if(load)
   {
      if(((uint64_t)transmit_pos + transmit_count) > sizeof(transmit_buffer))
      {
         transmit_pos = 0;
         transmit_count = 0;
      }
   }

   return(ret);
}

开发者ID:aliaspider，项目名称:beetle-psx-libretro，代码行数:33，代码来源:gamepad.cpp

示例13: MDFNGBSOUND_StateAction

int MDFNGBSOUND_StateAction(StateMem *sm, int load, int data_only)
{
 gb_apu_state_t gb_state;
 int ret = 1;

 //if(!load) // always save state, in case there is none to load
 {
  gb_apu.save_state(&gb_state);
 }

 SFORMAT StateRegs[] =
 {
  SFVARN(gb_state, "apu_state"),
  SFEND
 };

 if(!MDFNSS_StateAction(sm, load, data_only, StateRegs, "APU"))
  ret = 0;
 else if(load)
 {
  // TODO: set hardware mode to mode_dmg, mode_cgb, or mode_agb
  // (latter if you're running classic GB game on Game Boy Advance)
  gb_apu.reset();
  gb_apu.load_state(gb_state);
 }
 return(ret);
}

开发者ID:IcooN，项目名称:OpenEmu，代码行数:27，代码来源:sound.cpp

示例14: StateAction

static void StateAction(StateMem *sm, const unsigned load, const bool data_only)
{
 SFORMAT StateRegs[] =
 {
  SFARRAY(BaseRAM, IsSGX? 32768 : 8192),
  SFVAR(PCEIODataBuffer),
  SFEND
 };

 //for(int i = 8192; i < 32768; i++)
 // if(BaseRAM[i] != 0xFF)
 //  printf("%d %02x\n", i, BaseRAM[i]);

 MDFNSS_StateAction(sm, load, data_only, StateRegs, "MAIN");

 HuC6280_StateAction(sm, load, data_only);
 VDC_StateAction(sm, load, data_only);
 psg->StateAction(sm, load, data_only);
 INPUT_StateAction(sm, load, data_only);
 HuC_StateAction(sm, load, data_only);

 if(load)
 {

 }
}

开发者ID:aerdnar，项目名称:emu-ex-plus-alpha，代码行数:26，代码来源:pce.cpp

示例15: MDINPUT_StateAction

int MDINPUT_StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[] =
 {
  SFARRAY(PortData, 3),
  SFARRAY(PortCtrl, 3),
  SFARRAY(PortTxData, 3),
  SFARRAY(PortSCtrl, 3),

  SFARRAY(PortDataBus, 3),
  SFEND
 };

 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "IO");

 ret &= port[0]->StateAction(sm, load, data_only, "PRTA");
 ret &= port[1]->StateAction(sm, load, data_only, "PRTB");
 ret &= port[2]->StateAction(sm, load, data_only, "PRTC");

 if(load)
 {

 }
 return(ret);
}

开发者ID:XeresRazor，项目名称:Provenance，代码行数:25，代码来源:genio.cpp

示例16: StateAction

static int StateAction(StateMem *sm, int load, int data_only)
{
 //uint32 NWCIRQCount;
 //uint8 NWCRec;

 SFORMAT StateRegs[] =
 {
  SFARRAY(WRAM, WRAM_Size),
  SFARRAY(CHRRAM, 8192),
  SFARRAY(DRegs, 4),
  SFVAR(lreset),
  SFVAR(Buffer),
  SFVAR(BufferShift),
  SFEND
 };

 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "MAPR");
 if(load)
 {
  MMC1MIRROR();
  MMC1CHR();
  MMC1PRG();
  lreset=0;      /* timestamp(base) is not stored in save states. */
 }
 return(ret);
}

开发者ID:gameblabla，项目名称:mednafen-gcw，代码行数:26，代码来源:mmc1.cpp

示例17: HuC_StateAction

int HuC_StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[] = 
 {
  SFARRAY(ROMSpace + 0x40 * 8192, IsPopulous ? 32768 : 0),
  SFARRAY(TsushinRAM, IsTsushin ? 32768 : 0),
  SFARRAY(SaveRAM, (IsPopulous || IsTsushin) ? 0 : 2048),
  SFARRAY(ROMSpace + 0x68 * 8192, PCE_IsCD ? 262144 : 0),
  SFVAR(HuCSF2Latch),
  SFEND
 };
 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "HuC");

 if(load)
  HuCSF2Latch &= 0x3;

 if(PCE_IsCD)
 {
  ret &= PCECD_StateAction(sm, load, data_only);

  if(arcade_card)
   ret &= arcade_card->StateAction(sm, load, data_only);
 }
 return(ret);
}

开发者ID:acgleader，项目名称:emu-ex-plus-alpha，代码行数:25，代码来源:huc.cpp

示例18: StateAction

static int StateAction(StateMem *sm, int load, int data_only)
{
 SFORMAT StateRegs[] =
 {
        SFVARN(reg_select, "FM7S"),
        SFVARN(wram_control, "FM7W"),
        SFARRAYN(sr, 0x10, "FM7SR"),
        SFVARN(sr_index, "FM7I"),
	SFARRAY(PRGRegs, 3),
	SFARRAY(CHRRegs, 8),
	SFVAR(Mirroring),
	SFARRAY32(vcount, 3),
	SFARRAY32(dcount, 3),

	SFVAR(IRQa),
	SFVAR(IRQCount),
	
	SFARRAY(WRAM, 8192),

	SFEND
 };

 int ret = MDFNSS_StateAction(sm, load, data_only, StateRegs, "MAPR");

 if(load)
 {
  SyncCHR();
  SyncPRG();
  SyncMirroring();
 }

 return(ret);
}

开发者ID:Oggom，项目名称:mednafen-git，代码行数:33，代码来源:fme7.cpp

示例19: SFVAR

void CCart::StateAction(StateMem *sm, const unsigned load, const bool data_only)
{
 SFORMAT CartRegs[] =
 {
        SFVAR(mCounter),
        SFVAR(mShifter),
        SFVAR(mAddrData),
        SFVAR(mStrobe),
        SFVAR(mShiftCount0),
        SFVAR(mCountMask0),
        SFVAR(mShiftCount1),
        SFVAR(mCountMask1),
        SFVAR(mBank),
        SFVAR(mWriteEnableBank0),
        SFVAR(mWriteEnableBank1),
	SFVAR(last_strobe),
	SFARRAYN(mCartBank1.get(), mCartRAM ? mMaskBank1 + 1 : 0, "mCartBank1"),
	SFEND
 };

 MDFNSS_StateAction(sm, load, data_only, CartRegs, "CART");

 if(load)
 {

 }
}

开发者ID:Oggom，项目名称:mednafen-git，代码行数:27，代码来源:cart.cpp

示例20: MDFNSS_StateAction

int MDFNSS_StateAction(StateMem *st, int load, int data_only, SFORMAT *sf, const char *name, bool optional)
{
	std::vector <SSDescriptor> love;

	love.push_back(SSDescriptor(sf, name, optional));
	return(MDFNSS_StateAction(st, load, data_only, love));
}

开发者ID:CaoCaoBeard，项目名称:pcejin，代码行数:7，代码来源:state.cpp

注：本文中的MDFNSS_StateAction函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MDFN_Error函数代码示例发布时间：2022-05-30

C++ MDEBUG函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19242|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10002|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8332|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8702|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8648|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9674|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8633|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8007|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8670|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7541|2022-11-06

客服电话

电子邮件

C++ MDFNSS_StateAction函数代码示例

示例1: StateAction

示例2: SFVAR

示例3: SFVAR

示例4: GBZ80_StateAction

示例5: HuC_StateAction

示例6: SMS_SoundStateAction

示例7: StateAction

示例8: StateAction

示例9: StateAction

示例10: HuC_StateAction

示例11: SFVAR

示例12: SFVAR

示例13: MDFNGBSOUND_StateAction

示例14: StateAction

示例15: MDINPUT_StateAction

示例16: StateAction

示例17: HuC_StateAction

示例18: StateAction

示例19: SFVAR

示例20: MDFNSS_StateAction

请发表评论

全部评论

上一篇：

下一篇：

Delphi 日志记录和查看

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053