• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ MCSDL_GPIO_SCL_SET_HIGH函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MCSDL_GPIO_SCL_SET_HIGH函数的典型用法代码示例。如果您正苦于以下问题:C++ MCSDL_GPIO_SCL_SET_HIGH函数的具体用法?C++ MCSDL_GPIO_SCL_SET_HIGH怎么用?C++ MCSDL_GPIO_SCL_SET_HIGH使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MCSDL_GPIO_SCL_SET_HIGH函数的11个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mcsdl_write_bits

static void mcsdl_write_bits(UINT32 wordData, int nBits)
{
    int i;

    MCSDL_GPIO_SCL_SET_LOW();
    MCSDL_GPIO_SDA_SET_LOW();

    for (i = 0; i < nBits; i++)
    {
        if (wordData & 0x80000000) {
            MCSDL_GPIO_SDA_SET_HIGH();
        }
        else                       {
            MCSDL_GPIO_SDA_SET_LOW();
        }

        mcsdl_delay(MCSDL_DELAY_3US);

        MCSDL_GPIO_SCL_SET_HIGH();
        mcsdl_delay(MCSDL_DELAY_3US);
        MCSDL_GPIO_SCL_SET_LOW();
        mcsdl_delay(MCSDL_DELAY_3US);

        wordData <<= 1;
    }
}
开发者ID:RolanDroid,项目名称:lge_MonsterKernel-lproj,代码行数:26,代码来源:mcs8000_download.c


示例2: mcsdl_scl_toggle_twice

// Change it from static void to void by matthew.kim
void mcsdl_scl_toggle_twice(void)
{

    MCSDL_GPIO_SDA_SET_HIGH();
    MCSDL_GPIO_SDA_SET_OUTPUT(1);

    MCSDL_GPIO_SCL_SET_HIGH();
    mcsdl_delay(MCSDL_DELAY_20US);
    MCSDL_GPIO_SCL_SET_LOW();
    mcsdl_delay(MCSDL_DELAY_20US);

    MCSDL_GPIO_SCL_SET_HIGH();
    mcsdl_delay(MCSDL_DELAY_20US);
    MCSDL_GPIO_SCL_SET_LOW();
    mcsdl_delay(MCSDL_DELAY_20US);
}
开发者ID:RolanDroid,项目名称:lge_MonsterKernel-lproj,代码行数:17,代码来源:mcs8000_download.c


示例3: mcsdl_read_32bits

static void mcsdl_read_32bits( UINT8 *pData )
{
    int i, j;
    MCSDL_GPIO_SCL_SET_LOW();
    MCSDL_GPIO_SDA_SET_LOW();
    MCSDL_GPIO_SDA_SET_INPUT();



    for (i=3; i>=0; i--) {

        pData[i] = 0;

        for (j=0; j<8; j++) {

            pData[i] <<= 1;

            MCSDL_GPIO_SCL_SET_LOW();
            mcsdl_delay(MCSDL_DELAY_1US);
            MCSDL_GPIO_SCL_SET_HIGH();
            mcsdl_delay(MCSDL_DELAY_1US);

            if (MCSDL_GPIO_SDA_IS_HIGH())
                pData[i] |= 0x01;
        }
    }

    MCSDL_GPIO_SDA_SET_LOW();
    MCSDL_GPIO_SDA_SET_OUTPUT(0);
}
开发者ID:RolanDroid,项目名称:lge_MonsterKernel-lproj,代码行数:30,代码来源:mcs8000_download.c


示例4: mcsdl_reboot_mcs

static void mcsdl_reboot_mcs(void)
{
    MCSDL_VDD_SET_LOW();

    MCSDL_CE_SET_LOW();
    MCSDL_CE_SET_OUTPUT(0);

    MCSDL_GPIO_SDA_SET_HIGH();
    MCSDL_GPIO_SDA_SET_OUTPUT(1);

    MCSDL_GPIO_SCL_SET_HIGH();
    MCSDL_GPIO_SCL_SET_OUTPUT(1);

    MCSDL_RESETB_SET_LOW();
    MCSDL_RESETB_SET_OUTPUT(0);

    mcsdl_delay(MCSDL_DELAY_25MS);                                          /* Delay for Stable VDD */

    MCSDL_VDD_SET_HIGH();
    /*MCSDL_CE_SET_HIGH();*/

    MCSDL_RESETB_SET_HIGH();
    MCSDL_RESETB_SET_INPUT();
    MCSDL_GPIO_SCL_SET_INPUT();
    MCSDL_GPIO_SDA_SET_INPUT();

    mcsdl_delay(MCSDL_DELAY_30MS);                                          /* Delay '25 msec' */
}
开发者ID:suiye223,项目名称:p920-ICS-kernel,代码行数:28,代码来源:mms136_ISP_download.c


示例5: mcsdl_write_bits

static void mcsdl_write_bits(UINT32 wordData, int nBits)
{
	int i;

    MCSDL_GPIO_SCL_SET_LOW();
    MCSDL_GPIO_SDA_SET_LOW();

    for (i = 0; i < nBits; i++)
    {
        if (wordData & 0x80000000) {
					MCSDL_GPIO_SDA_SET_HIGH();
				}
        else	{
					MCSDL_GPIO_SDA_SET_LOW();
				}

				/* LGE_CHANGE_S: E0 [email protected] [2011-11-09] */
				
        mcsdl_delay(MCSDL_DELAY_3US);
				MCSDL_GPIO_SCL_SET_HIGH();		
				mcsdl_delay(MCSDL_DELAY_3US);
				MCSDL_GPIO_SCL_SET_LOW();		
				mcsdl_delay(MCSDL_DELAY_3US);
				
				wordData <<= 1;
	}
}
开发者ID:ochiman,项目名称:e405-kernel,代码行数:27,代码来源:mms100_ISP_download_e1.c


示例6: mcsdl_delay_test

void mcsdl_delay_test(INT32 nCount)
{
    INT16 i;
    MELFAS_DISABLE_BASEBAND_ISR();                          /*Disable Baseband touch interrupt ISR*/
    MELFAS_DISABLE_WATCHDOG_TIMER_RESET();                  /* Disable Baseband watchdog timer*/

    /*--------------------------------
    //      Repeating 'nCount' times
    //--------------------------------*/
    /*MCSDL_SET_GPIO_I2C();*/
    MCSDL_GPIO_SCL_SET_OUTPUT(0);
    MCSDL_GPIO_SDA_SET_OUTPUT(0);
    MCSDL_RESETB_SET_OUTPUT(0);

    MCSDL_GPIO_SCL_SET_HIGH();

    for (i = 0; i < nCount; i++) {
#if 1
        MCSDL_GPIO_SCL_SET_LOW();
        mcsdl_delay(MCSDL_DELAY_20US);
        MCSDL_GPIO_SCL_SET_HIGH();
        mcsdl_delay(MCSDL_DELAY_100US);
#elif 0
        MCSDL_GPIO_SCL_SET_LOW();
        mcsdl_delay(MCSDL_DELAY_500US);
        MCSDL_GPIO_SCL_SET_HIGH();
        mcsdl_delay(MCSDL_DELAY_1MS);
#else
        MCSDL_GPIO_SCL_SET_LOW();
        mcsdl_delay(MCSDL_DELAY_25MS);
        TKEY_INTR_SET_LOW();
        mcsdl_delay(MCSDL_DELAY_45MS);
        TKEY_INTR_SET_HIGH();
#endif
    }

    MCSDL_GPIO_SCL_SET_HIGH();

    MELFAS_ROLLBACK_BASEBAND_ISR();                         /* Roll-back Baseband touch interrupt ISR.*/
    MELFAS_ROLLBACK_WATCHDOG_TIMER_RESET();                 /* Roll-back Baseband watchdog timer */
}
开发者ID:suiye223,项目名称:p920-ICS-kernel,代码行数:41,代码来源:mms136_ISP_download.c


示例7: mcsdl_unselect_isp_mode

static void mcsdl_unselect_isp_mode(void)
{
    int i;

    MCSDL_RESETB_SET_LOW();
    mcsdl_delay(MCSDL_DELAY_3US);

    for (i = 0; i < 10; i++) {
        MCSDL_GPIO_SCL_SET_HIGH();
        mcsdl_delay(MCSDL_DELAY_3US);
        MCSDL_GPIO_SCL_SET_LOW();
        mcsdl_delay(MCSDL_DELAY_3US);
    }
}
开发者ID:suiye223,项目名称:p920-ICS-kernel,代码行数:14,代码来源:mms136_ISP_download.c


示例8: mcsdl_reboot_mcs

static void mcsdl_reboot_mcs(void)
{
	//--------------------------------------------
	// Tkey module reset
	//--------------------------------------------

	MCSDL_VDD_SET_LOW();

	//MCSDL_CE_SET_LOW();
	//MCSDL_CE_SET_OUTPUT();

	MCSDL_GPIO_SDA_SET_HIGH();
	MCSDL_GPIO_SDA_SET_OUTPUT();

	MCSDL_GPIO_SCL_SET_HIGH();
	MCSDL_GPIO_SCL_SET_OUTPUT();

	//MCSDL_SET_HW_I2C();

	gpio_free(GPIO_TOUCH_I2C_SDA);
	gpio_free(GPIO_TOUCH_I2C_SCL);

	mdelay(500);

	mcsdl_set_hw_i2c();

	MCSDL_RESETB_SET_LOW();
	MCSDL_RESETB_SET_OUTPUT();

	mdelay(500); //mcsdl_delay(MCSDL_DELAY_60MS); // Delay for Stable VDD
	

	MCSDL_RESETB_SET_INPUT();
	MCSDL_VDD_SET_HIGH();

	MCSDL_RESETB_SET_HIGH();
	//MCSDL_CE_SET_HIGH();

	mdelay(500); //mcsdl_delay(MCSDL_DELAY_60MS); // Delay '25 msec'

}
开发者ID:CenterTurkHD,项目名称:android_kernel_samsung_hugo,代码行数:41,代码来源:melfas_download.c


示例9: MFS_reboot

void MFS_reboot(void)
{
	MCSDL_VDD_SET_LOW();

	MCSDL_GPIO_SDA_SET_HIGH();
	MCSDL_GPIO_SDA_SET_OUTPUT(1);

	MCSDL_GPIO_SCL_SET_HIGH();
	MCSDL_GPIO_SCL_SET_OUTPUT(1);

	MCSDL_RESETB_SET_LOW();
	MCSDL_RESETB_SET_OUTPUT(1);

	MFS_ms_delay(25);

	MCSDL_VDD_SET_HIGH();

	MCSDL_RESETB_SET_HIGH();
	MCSDL_RESETB_SET_INPUT();
	MCSDL_GPIO_SCL_SET_INPUT();
	MCSDL_GPIO_SDA_SET_INPUT();

	MFS_ms_delay(25);
}
开发者ID:IjazCi,项目名称:android_kernel_samsung_kylexx,代码行数:24,代码来源:MMS100S_ISC_Updater_Customize.c


示例10: mcsdl_select_isp_mode

static void mcsdl_select_isp_mode(UINT8 ucMode)
{
	int    i;

	UINT8 enteringCodeMassErase[16]   = { 0,1,0,1,1,0,0,1,1,1,1,1,0,0,1,1 };
	UINT8 enteringCodeSerialWrite[16] = { 0,1,1,0,0,0,1,0,1,1,0,0,1,1,0,1 };
	UINT8 enteringCodeSerialRead[16]  = { 0,1,1,0,1,0,1,0,1,1,0,0,1,0,0,1 };
	UINT8 enteringCodeNextChipBypass[16]  = { 1,1,0,1,1,0,0,1,0,0,1,0,1,1,0,1 };

	UINT8 *pCode;


	//------------------------------------
	// Entering ISP mode : Part 1
	//------------------------------------

    if (ucMode == ISP_MODE_ERASE_FLASH) pCode = enteringCodeMassErase;
    else if (ucMode == ISP_MODE_SERIAL_WRITE) pCode = enteringCodeSerialWrite;
    else if (ucMode == ISP_MODE_SERIAL_READ) pCode = enteringCodeSerialRead;
    else if (ucMode == ISP_MODE_NEXT_CHIP_BYPASS) pCode = enteringCodeNextChipBypass;

    MCSDL_RESETB_SET_LOW();
    MCSDL_GPIO_SCL_SET_LOW();
    MCSDL_GPIO_SDA_SET_HIGH();
    for (i = 0; i < 16; i++)
    {
        if (pCode[i] == 1)
            MCSDL_RESETB_SET_HIGH();
		else
            MCSDL_RESETB_SET_LOW();

//start add delay for INT
        mcsdl_delay(MCSDL_DELAY_3US);
//end delay for INT

		MCSDL_GPIO_SCL_SET_HIGH();	mcsdl_delay(MCSDL_DELAY_3US);
		MCSDL_GPIO_SCL_SET_LOW();	mcsdl_delay(MCSDL_DELAY_3US);


   }

    MCSDL_RESETB_SET_LOW();

	//---------------------------------------------------
	// Entering ISP mode : Part 2	- Only Mass Erase
	//---------------------------------------------------
    mcsdl_delay(MCSDL_DELAY_7US);

    MCSDL_GPIO_SCL_SET_LOW();
    MCSDL_GPIO_SDA_SET_HIGH();
	 if( ucMode == ISP_MODE_ERASE_FLASH   ){
        mcsdl_delay(MCSDL_DELAY_7US);
		for(i=0; i<4; i++){

				 if( i==2 ) mcsdl_delay(MCSDL_DELAY_25MS);
			else if( i==3 ) mcsdl_delay(MCSDL_DELAY_150US);

			MCSDL_GPIO_SCL_SET_HIGH();	mcsdl_delay(MCSDL_DELAY_3US);
			MCSDL_GPIO_SCL_SET_LOW();	mcsdl_delay(MCSDL_DELAY_7US);
		}
	}
    MCSDL_GPIO_SDA_SET_LOW();
}
开发者ID:CL0SeY,项目名称:i957kernel,代码行数:63,代码来源:mcs8000_download.c


示例11: mcsdl_program_flash

static int mcsdl_program_flash( UINT8 *pDataOriginal, UINT16 unLength, INT8 IdxNum )
{
	int		i;

	UINT8	*pData;
	UINT8   ucLength;

	UINT16  addr;
	UINT32  header;

	addr   = 0;
	pData  = pDataOriginal;

    ucLength = MELFAS_TRANSFER_LENGTH;

//kang

    while ((addr*4) < (int)unLength)
    {
        if ((unLength - (addr*4)) < MELFAS_TRANSFER_LENGTH)
        {
            ucLength  = (UINT8)(unLength - (addr * 4));
        }

    	//--------------------------------------
    	//	Select ISP Mode
    	//--------------------------------------

		// start ADD DELAY
        mcsdl_delay(MCSDL_DELAY_40US);
		//end ADD DELAY
        if(IdxNum > 0)  {
		mcsdl_select_isp_mode(ISP_MODE_NEXT_CHIP_BYPASS);
		mcsdl_delay(MCSDL_DELAY_3US);

        }
    	mcsdl_select_isp_mode( ISP_MODE_SERIAL_WRITE );

    	//---------------------------------------------
    	//	Header
    	//	Address[13ibts] <<1
    	//---------------------------------------------
    	header = ((addr&0x1FFF) << 1) | 0x0 ;
 		header = header << 14;

    	 //Write 18bits
    	mcsdl_write_bits( header, 18 );
		//start ADD DELAY
        //mcsdl_delay(MCSDL_DELAY_5MS);
		//end ADD DELAY

    	//---------------------------------
    	//	Writing
    	//---------------------------------
    //		addr += (UINT16)ucLength;
            addr +=1;

		#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
		printk("#");
		#endif


		mcsdl_program_flash_part(pData);

		pData  += ucLength;

    	//---------------------------------------------
    	//	Tail
    	//---------------------------------------------
        MCSDL_GPIO_SDA_SET_HIGH();
//kang
	    mcsdl_delay(MCSDL_DELAY_40US);

        for (i = 0; i < 6; i++)
        {
            if (i == 2)
            {
                mcsdl_delay(MCSDL_DELAY_20US);
            }
            else if (i == 3)
            {
                mcsdl_delay(MCSDL_DELAY_40US);
            }

            MCSDL_GPIO_SCL_SET_HIGH();  mcsdl_delay(MCSDL_DELAY_10US);
            MCSDL_GPIO_SCL_SET_LOW();   mcsdl_delay(MCSDL_DELAY_10US);
        }
        MCSDL_GPIO_SDA_SET_LOW();

    	mcsdl_unselect_isp_mode();
//start ADD DELAY
        mcsdl_delay(MCSDL_DELAY_300US);
//end ADD DELAY


	}

	return MCSDL_RET_SUCCESS;
}
开发者ID:CL0SeY,项目名称:i957kernel,代码行数:99,代码来源:mcs8000_download.c



注:本文中的MCSDL_GPIO_SCL_SET_HIGH函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MCSDL_GPIO_SDA_SET_LOW函数代码示例发布时间:2022-05-30
下一篇:
C++ MCR函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap