C++ MCOperand_getImm函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MCOperand_getImm函数的典型用法代码示例。如果您正苦于以下问题：C++ MCOperand_getImm函数的具体用法？C++ MCOperand_getImm怎么用？C++ MCOperand_getImm使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MCOperand_getImm函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: printBDLAddrOperand

static void printBDLAddrOperand(MCInst *MI, int OpNum, SStream *O)
{
	unsigned Base = MCOperand_getReg(MCInst_getOperand(MI, OpNum));
	uint64_t Disp = (uint64_t)MCOperand_getImm(MCInst_getOperand(MI, OpNum + 1));
	uint64_t Length = (uint64_t)MCOperand_getImm(MCInst_getOperand(MI, OpNum + 2));

	if (Disp > HEX_THRESHOLD)
		SStream_concat(O, "0x%"PRIx64, Disp);
	else
		SStream_concat(O, "%"PRIu64, Disp);

	if (Length > HEX_THRESHOLD)
		SStream_concat(O, "(0x%"PRIx64, Length);
	else
		SStream_concat(O, "(%"PRIu64, Length);

	if (Base)
		SStream_concat(O, ", %%%s", getRegisterName(Base));
	SStream_concat0(O, ")");

	if (MI->csh->detail) {
		MI->flat_insn->detail->sysz.operands[MI->flat_insn->detail->sysz.op_count].type = SYSZ_OP_MEM;
		MI->flat_insn->detail->sysz.operands[MI->flat_insn->detail->sysz.op_count].mem.base = (uint8_t)SystemZ_map_register(Base);
		MI->flat_insn->detail->sysz.operands[MI->flat_insn->detail->sysz.op_count].mem.length = Length;
		MI->flat_insn->detail->sysz.operands[MI->flat_insn->detail->sysz.op_count].mem.disp = (int64_t)Disp;
		MI->flat_insn->detail->sysz.op_count++;
	}
}

开发者ID:SlNPacifist，项目名称:ProDBG，代码行数:28，代码来源:SystemZInstPrinter.c

示例2: printMemExtend

static void printMemExtend(MCInst *MI, unsigned OpNum, SStream *O, char SrcRegKind, unsigned Width)
{
	unsigned SignExtend = (unsigned)MCOperand_getImm(MCInst_getOperand(MI, OpNum));
	unsigned DoShift = (unsigned)MCOperand_getImm(MCInst_getOperand(MI, OpNum + 1));

	// sxtw, sxtx, uxtw or lsl (== uxtx)
	bool IsLSL = !SignExtend && SrcRegKind == 'x';
	if (IsLSL) {
		SStream_concat0(O, "lsl");
		if (MI->csh->detail) {
			MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].shift.type = ARM64_SFT_LSL;
		}
	} else {
		SStream_concat(O, "%cxt%c", (SignExtend ? 's' : 'u'), SrcRegKind);
		if (MI->csh->detail) {
			if (!SignExtend) {
				switch(SrcRegKind) {
					default: break;
					case 'b':
							 MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].ext = ARM64_EXT_UXTB;
							 break;
					case 'h':
							 MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].ext = ARM64_EXT_UXTH;
							 break;
					case 'w':
							 MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].ext = ARM64_EXT_UXTW;
							 break;
				}
			} else {
					switch(SrcRegKind) {
						default: break;
						case 'b':
							MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].ext = ARM64_EXT_SXTB;
							break;
						case 'h':
							MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].ext = ARM64_EXT_SXTH;
							break;
						case 'w':
							MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].ext = ARM64_EXT_SXTW;
							break;
						case 'x':
							MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].ext = ARM64_EXT_SXTX;
							break;
					}
			}
		}
	}

	if (DoShift || IsLSL) {
		SStream_concat(O, " #%u", Log2_32(Width / 8));
		if (MI->csh->detail) {
			MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].shift.type = ARM64_SFT_LSL;
			MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].shift.value = Log2_32(Width / 8);
		}
	}
}

开发者ID:lq10secboy，项目名称:capstone，代码行数:56，代码来源:AArch64InstPrinter.c

示例3: printHexImm

static void printHexImm(MCInst *MI, unsigned OpNo, SStream *O)
{
	MCOperand *Op = MCInst_getOperand(MI, OpNo);
	SStream_concat(O, "#%#llx", MCOperand_getImm(Op));
	if (MI->csh->detail) {
		MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].type = ARM64_OP_IMM;
		MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].imm = MCOperand_getImm(Op);
		MI->flat_insn->detail->arm64.op_count++;
	}
}

开发者ID:bSr43，项目名称:capstone，代码行数:10，代码来源:AArch64InstPrinter.c

示例4: printSysCROperand

static void printSysCROperand(MCInst *MI, unsigned OpNo, SStream *O)
{
	MCOperand *Op = MCInst_getOperand(MI, OpNo);
	//assert(Op.isImm() && "System instruction C[nm] operands must be immediates!");
	SStream_concat(O, "c%u", MCOperand_getImm(Op));
	if (MI->csh->detail) {
		MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].type = ARM64_OP_CIMM;
		MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].imm = MCOperand_getImm(Op);
		MI->flat_insn->detail->arm64.op_count++;
	}
}

开发者ID:bSr43，项目名称:capstone，代码行数:11，代码来源:AArch64InstPrinter.c

示例5: printPCRelOperand

static void printPCRelOperand(MCInst *MI, int OpNum, SStream *O)
{
	MCOperand *MO = MCInst_getOperand(MI, OpNum);
	int32_t imm;

	if (MCOperand_isImm(MO)) {
		imm = (int32_t)MCOperand_getImm(MO);
		if (imm >= 0) {
			if (imm > HEX_THRESHOLD)
				SStream_concat(O, "0x%x", imm);
			else
				SStream_concat(O, "%u", imm);
		} else {
			if (imm < -HEX_THRESHOLD)
				SStream_concat(O, "-0x%x", -imm);
			else
				SStream_concat(O, "-%u", -imm);
		}

		if (MI->csh->detail) {
			MI->flat_insn->detail->sysz.operands[MI->flat_insn->detail->sysz.op_count].type = SYSZ_OP_IMM;
			MI->flat_insn->detail->sysz.operands[MI->flat_insn->detail->sysz.op_count].imm = (int64_t)imm;
			MI->flat_insn->detail->sysz.op_count++;
		}
	}
}

开发者ID:SlNPacifist，项目名称:ProDBG，代码行数:26，代码来源:SystemZInstPrinter.c

示例6: printS16ImmOperand_Mem

static void printS16ImmOperand_Mem(MCInst *MI, unsigned OpNo, SStream *O)
{
	if (MCOperand_isImm(MCInst_getOperand(MI, OpNo))) {
		short Imm = (short)MCOperand_getImm(MCInst_getOperand(MI, OpNo));
		// Do not print zero offset
		if (Imm == 0)
			return;

		if (Imm >= 0) {
			if (Imm > HEX_THRESHOLD)
				SStream_concat(O, "0x%x", Imm);
			else
				SStream_concat(O, "%u", Imm);
		} else {
			if (Imm < -HEX_THRESHOLD)
				SStream_concat(O, "-0x%x", -Imm);
			else
				SStream_concat(O, "-%u", -Imm);
		}

		if (MI->csh->detail) {
			if (MI->csh->doing_mem) {
				MI->flat_insn->detail->ppc.operands[MI->flat_insn->detail->ppc.op_count].mem.disp = Imm;
			} else {
				MI->flat_insn->detail->ppc.operands[MI->flat_insn->detail->ppc.op_count].type = PPC_OP_IMM;
				MI->flat_insn->detail->ppc.operands[MI->flat_insn->detail->ppc.op_count].imm = Imm;
				MI->flat_insn->detail->ppc.op_count++;
			}
		}
	} else
		printOperand(MI, OpNo, O);
}

开发者ID:HardlyHaki，项目名称:ProDBG，代码行数:32，代码来源:PPCInstPrinter.c

示例7: printPCRelImm

/// printPCRelImm - This is used to print an immediate value that ends up
/// being encoded as a pc-relative value.
static void printPCRelImm(MCInst *MI, unsigned OpNo, SStream *O)
{
	MCOperand *Op = MCInst_getOperand(MI, OpNo);
	if (MCOperand_isImm(Op)) {
		int64_t imm = MCOperand_getImm(Op) + MI->flat_insn->size + MI->address;
		if (imm < 0) {
			SStream_concat(O, "0x%"PRIx64, imm);
		} else {
			// handle 16bit segment bound
			if (MI->csh->mode == CS_MODE_16 && imm > 0x100000)
				imm -= 0x10000;

			if (imm > HEX_THRESHOLD)
				SStream_concat(O, "0x%"PRIx64, imm);
			else
				SStream_concat(O, "%"PRIu64, imm);
		}
		if (MI->csh->detail) {
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_IMM;
			// if op_count > 0, then this operand's size is taken from the destination op
			if (MI->flat_insn->detail->x86.op_count > 0)
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].size = MI->flat_insn->detail->x86.operands[0].size;
			else
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].size = MI->imm_size;
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].imm = imm;
			MI->flat_insn->detail->x86.op_count++;
		}

		if (MI->op1_size == 0)
			MI->op1_size = MI->imm_size;
	}
}

开发者ID:LucaBongiorni，项目名称:capstone，代码行数:34，代码来源:X86IntelInstPrinter.c

示例8: printLogicalImm64

static void printLogicalImm64(MCInst *MI, unsigned OpNum, SStream *O)
{
	int64_t Val = MCOperand_getImm(MCInst_getOperand(MI, OpNum));
	Val = AArch64_AM_decodeLogicalImmediate(Val, 64);

	switch(MI->flat_insn->id) {
		default:
			printInt64Bang(O, Val);
			break;
		case ARM64_INS_ORR:
		case ARM64_INS_AND:
		case ARM64_INS_EOR:
		case ARM64_INS_TST:
			// do not print number in negative form
			if (Val >= 0 && Val <= HEX_THRESHOLD)
				SStream_concat(O, "#%u", (int)Val);
			else
				SStream_concat(O, "#0x%"PRIx64, Val);
			break;
	}

	if (MI->csh->detail) {
		MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].type = ARM64_OP_IMM;
		MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].imm = (int)Val;
		MI->flat_insn->detail->arm64.op_count++;
	}
}

开发者ID:lq10secboy，项目名称:capstone，代码行数:27，代码来源:AArch64InstPrinter.c

示例9: printOperand

static void printOperand(MCInst *MI, unsigned OpNo, SStream *O)
{
    MCOperand *Op  = MCInst_getOperand(MI, OpNo);
    if (MCOperand_isReg(Op)) {
        printRegName(O, MCOperand_getReg(Op));
        if (MI->detail) {
            MI->pub_insn.x86.operands[MI->pub_insn.x86.op_count].type = X86_OP_REG;
            MI->pub_insn.x86.operands[MI->pub_insn.x86.op_count].reg = MCOperand_getReg(Op);
            MI->pub_insn.x86.op_count++;
        }
    } else if (MCOperand_isImm(Op)) {
        int64_t imm = MCOperand_getImm(Op);
        if (imm >= 0) {
            if (imm > HEX_THRESHOLD)
                SStream_concat(O, "0x%"PRIx64, imm);
            else
                SStream_concat(O, "%"PRIu64, imm);
        } else {
            if (imm <= -HEX_THRESHOLD)
                SStream_concat(O, "-0x%"PRIx64, -imm);
            else
                SStream_concat(O, "-%"PRIu64, -imm);
        }

        if (MI->detail) {
            MI->pub_insn.x86.operands[MI->pub_insn.x86.op_count].type = X86_OP_IMM;
            MI->pub_insn.x86.operands[MI->pub_insn.x86.op_count].imm = imm;
            MI->pub_insn.x86.op_count++;
        }
    }
}

开发者ID:0xKD，项目名称:capstone，代码行数:31，代码来源:X86IntelInstPrinter.c

示例10: printMemOperand

static void printMemOperand(MCInst *MI, int opNum, SStream *O, const char *Modifier)
{
	MCOperand *MO;

	set_mem_access(MI, true);
	printOperand(MI, opNum, O);

	// If this is an ADD operand, emit it like normal operands.
	if (Modifier && !strcmp(Modifier, "arith")) {
		SStream_concat0(O, ", ");
		printOperand(MI, opNum + 1, O);
		set_mem_access(MI, false);
		return;
	}

	MO = MCInst_getOperand(MI, opNum + 1);

	if (MCOperand_isReg(MO) && (MCOperand_getReg(MO) == SP_G0)) {
		set_mem_access(MI, false);
		return;   // don't print "+%g0"
	}

	if (MCOperand_isImm(MO) && (MCOperand_getImm(MO) == 0)) {
		set_mem_access(MI, false);
		return;   // don't print "+0"
	}

	SStream_concat0(O, "+");	// qq

	printOperand(MI, opNum + 1, O);
	set_mem_access(MI, false);
}

开发者ID:HardlyHaki，项目名称:ProDBG，代码行数:32，代码来源:SparcInstPrinter.c

示例11: printU8Imm

static void printU8Imm(MCInst *MI, unsigned Op, SStream *O)
{
	uint8_t val = MCOperand_getImm(MCInst_getOperand(MI, Op)) & 0xff;

	if (val > HEX_THRESHOLD)
		SStream_concat(O, "0x%x", val);
	else
		SStream_concat(O, "%u", val);

	if (MI->csh->detail) {
#ifndef CAPSTONE_DIET
		uint8_t access[6];
#endif

		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_IMM;
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].imm = val;

#ifndef CAPSTONE_DIET
		get_op_access(MI->csh, MCInst_getOpcode(MI), access, &MI->flat_insn->detail->x86.eflags);
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].access = access[MI->flat_insn->detail->x86.op_count];
#endif

		MI->flat_insn->detail->x86.op_count++;
	}
}

开发者ID:lq10secboy，项目名称:capstone，代码行数:25，代码来源:X86IntelInstPrinter.c

示例12: printOperand

static void printOperand(MCInst *MI, unsigned OpNo, SStream *O)
{
	MCOperand *Op  = MCInst_getOperand(MI, OpNo);
	if (MCOperand_isReg(Op)) {
		printRegName(O, MCOperand_getReg(Op));
		if (MI->csh->detail) {
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_REG;
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].reg = MCOperand_getReg(Op);
			MI->flat_insn->detail->x86.op_count++;
		}
	} else if (MCOperand_isImm(Op)) {
		// Print X86 immediates as signed values.
		int64_t imm = MCOperand_getImm(Op);
		if (imm >= 0) {
			if (imm > HEX_THRESHOLD)
				SStream_concat(O, "%s$0x%"PRIx64"%s", markup("<imm:"), imm, markup(">"));
			else
				SStream_concat(O, "%s$%"PRIu64"%s", markup("<imm:"), imm, markup(">"));
		} else {
			if (imm < -HEX_THRESHOLD)
				SStream_concat(O, "%s$-0x%"PRIx64"%s", markup("<imm:"), -imm, markup(">"));
			else
				SStream_concat(O, "%s$-%"PRIu64"%s", markup("<imm:"), -imm, markup(">"));
		}
		if (MI->csh->detail) {
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_IMM;
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].imm = imm;
			MI->flat_insn->detail->x86.op_count++;
		}
	}
}

开发者ID:CyberIntelMafia，项目名称:monitor，代码行数:31，代码来源:X86ATTInstPrinter.c

示例13: printPCRelImm

/// printPCRelImm - This is used to print an immediate value that ends up
/// being encoded as a pc-relative value (e.g. for jumps and calls).  These
/// print slightly differently than normal immediates.  For example, a $ is not
/// emitted.
static void printPCRelImm(MCInst *MI, unsigned OpNo, SStream *O)
{
	MCOperand *Op = MCInst_getOperand(MI, OpNo);
	if (MCOperand_isImm(Op)) {
		int64_t imm = MCOperand_getImm(Op) + MI->flat_insn->size + MI->address;
		if (imm < 0) {
			if (imm < -HEX_THRESHOLD)
				SStream_concat(O, "-0x%"PRIx64, -imm);
			else
				SStream_concat(O, "-%"PRIu64, -imm);
		} else {
			// handle 16bit segment bound
			if (MI->csh->mode == CS_MODE_16 && imm > 0x100000)
				imm -= 0x10000;

			if (imm > HEX_THRESHOLD)
				SStream_concat(O, "0x%"PRIx64, imm);
			else
				SStream_concat(O, "%"PRIu64, imm);
		}
		if (MI->csh->detail) {
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_IMM;
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].imm = imm;
			MI->flat_insn->detail->x86.op_count++;
		}
	}
}

开发者ID:CyberIntelMafia，项目名称:monitor，代码行数:31，代码来源:X86ATTInstPrinter.c

示例14: printCCOperand

static void printCCOperand(MCInst *MI, int opNum, SStream *O)
{
	int CC = (int)MCOperand_getImm(MCInst_getOperand(MI, opNum)) + 256;

	switch (MCInst_getOpcode(MI)) {
		default: break;
		case SP_FBCOND:
		case SP_FBCONDA:
		case SP_BPFCC:
		case SP_BPFCCA:
		case SP_BPFCCNT:
		case SP_BPFCCANT:
		case SP_MOVFCCrr:  case SP_V9MOVFCCrr:
		case SP_MOVFCCri:  case SP_V9MOVFCCri:
		case SP_FMOVS_FCC: case SP_V9FMOVS_FCC:
		case SP_FMOVD_FCC: case SP_V9FMOVD_FCC:
		case SP_FMOVQ_FCC: case SP_V9FMOVQ_FCC:
				 // Make sure CC is a fp conditional flag.
				 CC = (CC < 16+256) ? (CC + 16) : CC;
				 break;
	}

	SStream_concat0(O, SPARCCondCodeToString((sparc_cc)CC));

	if (MI->csh->detail)
		MI->flat_insn->detail->sparc.cc = (sparc_cc)CC;
}

开发者ID:HardlyHaki，项目名称:ProDBG，代码行数:27，代码来源:SparcInstPrinter.c

示例15: printBarrierOption

static void printBarrierOption(MCInst *MI, unsigned OpNo, SStream *O)
{
	unsigned Val = (unsigned)MCOperand_getImm(MCInst_getOperand(MI, OpNo));
	unsigned Opcode = MCInst_getOpcode(MI);
	bool Valid;
	char *Name;

	if (Opcode == AArch64_ISB)
		Name = A64NamedImmMapper_toString(&A64ISB_ISBMapper, Val, &Valid);
	else
		Name = A64NamedImmMapper_toString(&A64DB_DBarrierMapper, Val, &Valid);

	if (Valid) {
		SStream_concat0(O, Name);
		if (MI->csh->detail) {
			MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].type = ARM64_OP_BARRIER;
			MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].barrier = Val;
			MI->flat_insn->detail->arm64.op_count++;
		}
	} else {
		printUInt32Bang(O, Val);
		if (MI->csh->detail) {
			MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].type = ARM64_OP_IMM;
			MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count].imm = Val;
			MI->flat_insn->detail->arm64.op_count++;
		}
	}
}

开发者ID:lq10secboy，项目名称:capstone，代码行数:28，代码来源:AArch64InstPrinter.c

示例16: printMemOffset

static void printMemOffset(MCInst *MI, unsigned Op, SStream *O)
{
	MCOperand *DispSpec = MCInst_getOperand(MI, Op);
	MCOperand *SegReg = MCInst_getOperand(MI, Op + 1);
	int reg;

	if (MI->csh->detail) {
#ifndef CAPSTONE_DIET
		uint8_t access[6];
#endif

		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_MEM;
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].size = MI->x86opsize;
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.segment = X86_REG_INVALID;
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.base = X86_REG_INVALID;
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.index = X86_REG_INVALID;
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.scale = 1;
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.disp = 0;

#ifndef CAPSTONE_DIET
		get_op_access(MI->csh, MCInst_getOpcode(MI), access, &MI->flat_insn->detail->x86.eflags);
		MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].access = access[MI->flat_insn->detail->x86.op_count];
#endif
	}

	// If this has a segment register, print it.
	reg = MCOperand_getReg(SegReg);
	if (reg) {
		_printOperand(MI, Op + 1, O);
		SStream_concat0(O, ":");
		if (MI->csh->detail) {
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.segment = reg;
		}
	}

	SStream_concat0(O, "[");

	if (MCOperand_isImm(DispSpec)) {
		int64_t imm = MCOperand_getImm(DispSpec);
		if (MI->csh->detail)
			MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.disp = imm;
		if (imm < 0) {
			SStream_concat(O, "0x%"PRIx64, arch_masks[MI->csh->mode] & imm);
		} else {
			if (imm > HEX_THRESHOLD)
				SStream_concat(O, "0x%"PRIx64, imm);
			else
				SStream_concat(O, "%"PRIu64, imm);
		}
	}

	SStream_concat0(O, "]");

	if (MI->csh->detail)
		MI->flat_insn->detail->x86.op_count++;

	if (MI->op1_size == 0)
		MI->op1_size = MI->x86opsize;
}

开发者ID:lq10secboy，项目名称:capstone，代码行数:59，代码来源:X86IntelInstPrinter.c

示例17: printSparcAliasInstr

static bool printSparcAliasInstr(MCInst *MI, SStream *O)
{
	switch (MCInst_getOpcode(MI)) {
		default: return false;
		case SP_JMPLrr:
		case SP_JMPLri:
				 if (MCInst_getNumOperands(MI) != 3)
					 return false;
				 if (!MCOperand_isReg(MCInst_getOperand(MI, 0)))
					 return false;

				 switch (MCOperand_getReg(MCInst_getOperand(MI, 0))) {
					 default: return false;
					 case SP_G0: // jmp $addr | ret | retl
							  if (MCOperand_isImm(MCInst_getOperand(MI, 2)) &&
									MCOperand_getImm(MCInst_getOperand(MI, 2)) == 8) {
								  switch(MCOperand_getReg(MCInst_getOperand(MI, 1))) {
									  default: break;
									  case SP_I7: SStream_concat0(O, "ret"); MCInst_setOpcodePub(MI, SPARC_INS_RET); return true;
									  case SP_O7: SStream_concat0(O, "retl"); MCInst_setOpcodePub(MI, SPARC_INS_RETL); return true;
								  }
							  }

							  SStream_concat0(O, "jmp\t");
							  MCInst_setOpcodePub(MI, SPARC_INS_JMP);
							  printMemOperand(MI, 1, O, NULL);
							  return true;
					 case SP_O7: // call $addr
							  SStream_concat0(O, "call ");
							  MCInst_setOpcodePub(MI, SPARC_INS_CALL);
							  printMemOperand(MI, 1, O, NULL);
							  return true;
				 }
		case SP_V9FCMPS:
		case SP_V9FCMPD:
		case SP_V9FCMPQ:
		case SP_V9FCMPES:
		case SP_V9FCMPED:
		case SP_V9FCMPEQ:
				 if (MI->csh->mode & CS_MODE_V9 || (MCInst_getNumOperands(MI) != 3) ||
						 (!MCOperand_isReg(MCInst_getOperand(MI, 0))) ||
						 (MCOperand_getReg(MCInst_getOperand(MI, 0)) != SP_FCC0))
						 return false;
				 // if V8, skip printing %fcc0.
				 switch(MCInst_getOpcode(MI)) {
					 default:
					 case SP_V9FCMPS:  SStream_concat0(O, "fcmps\t"); MCInst_setOpcodePub(MI, SPARC_INS_FCMPS); break;
					 case SP_V9FCMPD:  SStream_concat0(O, "fcmpd\t"); MCInst_setOpcodePub(MI, SPARC_INS_FCMPD); break;
					 case SP_V9FCMPQ:  SStream_concat0(O, "fcmpq\t"); MCInst_setOpcodePub(MI, SPARC_INS_FCMPQ); break;
					 case SP_V9FCMPES: SStream_concat0(O, "fcmpes\t"); MCInst_setOpcodePub(MI, SPARC_INS_FCMPES); break;
					 case SP_V9FCMPED: SStream_concat0(O, "fcmped\t"); MCInst_setOpcodePub(MI, SPARC_INS_FCMPED); break;
					 case SP_V9FCMPEQ: SStream_concat0(O, "fcmpeq\t"); MCInst_setOpcodePub(MI, SPARC_INS_FCMPEQ); break;
				 }
				 printOperand(MI, 1, O);
				 SStream_concat0(O, ", ");
				 printOperand(MI, 2, O);
				 return true;
	}
}

开发者ID:HardlyHaki，项目名称:ProDBG，代码行数:59，代码来源:SparcInstPrinter.c

示例18: printCondCode

static void printCondCode(MCInst *MI, unsigned OpNum, SStream *O)
{
	A64CC_CondCode CC = (A64CC_CondCode)MCOperand_getImm(MCInst_getOperand(MI, OpNum));
	SStream_concat0(O, getCondCodeName(CC));

	if (MI->csh->detail)
		MI->flat_insn->detail->arm64.cc = (arm64_cc)(CC + 1);
}

开发者ID:lq10secboy，项目名称:capstone，代码行数:8，代码来源:AArch64InstPrinter.c

示例19: printOperand

static void printOperand(MCInst *MI, unsigned OpNo, SStream *O)
{
	MCOperand *Op  = MCInst_getOperand(MI, OpNo);
	if (MCOperand_isReg(Op)) {
		unsigned int reg = MCOperand_getReg(Op);
		printRegName(O, reg);
		if (MI->csh->detail) {
			if (MI->csh->doing_mem) {
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.base = reg;
			} else {
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_REG;
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].reg = reg;
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].size = MI->csh->regsize_map[reg];
				MI->flat_insn->detail->x86.op_count++;
			}
		}
	} else if (MCOperand_isImm(Op)) {
		// Print X86 immediates as signed values.
		int64_t imm = MCOperand_getImm(Op);

		switch(MI->flat_insn->id) {
			default:
				if (imm >= 0) {
					if (imm > HEX_THRESHOLD)
						SStream_concat(O, "$0x%"PRIx64, imm);
					else
						SStream_concat(O, "$%"PRIu64, imm);
				} else {
					if (imm < -HEX_THRESHOLD)
						SStream_concat(O, "$-0x%"PRIx64, -imm);
					else
						SStream_concat(O, "$-%"PRIu64, -imm);
				}
				break;
			case X86_INS_RET:
				// RET imm16
				if (imm >= 0 && imm <= HEX_THRESHOLD)
					SStream_concat(O, "$%u", imm);
				else {
					imm = 0xffff & imm;
					SStream_concat(O, "$0x%x", imm);
				}
				break;
		}

		if (MI->csh->detail) {
			if (MI->csh->doing_mem) {
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_MEM;
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].mem.disp = imm;
			} else {
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].type = X86_OP_IMM;
				MI->has_imm = true;
				MI->flat_insn->detail->x86.operands[MI->flat_insn->detail->x86.op_count].imm = imm;
				MI->flat_insn->detail->x86.op_count++;
			}
		}
	}
}

开发者ID:AGeekyDevil，项目名称:snowman，代码行数:58，代码来源:X86ATTInstPrinter.c

示例20: printVectorIndex

static void printVectorIndex(MCInst *MI, unsigned OpNum, SStream *O)
{
	SStream_concat0(O, "[");
	printInt32(O, (int)MCOperand_getImm(MCInst_getOperand(MI, OpNum)));
	SStream_concat0(O, "]");
	if (MI->csh->detail) {
		MI->flat_insn->detail->arm64.operands[MI->flat_insn->detail->arm64.op_count - 1].vector_index = (int)MCOperand_getImm(MCInst_getOperand(MI, OpNum));
	}
}

开发者ID:lq10secboy，项目名称:capstone，代码行数:9，代码来源:AArch64InstPrinter.c

注：本文中的MCOperand_getImm函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MCOperand_getReg函数代码示例发布时间：2022-05-30

C++ MCLGET函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19242|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10002|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8332|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8702|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8648|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9674|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8633|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8007|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8670|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7541|2022-11-06

客服电话

电子邮件

C++ MCOperand_getImm函数代码示例

示例1: printBDLAddrOperand

示例2: printMemExtend

示例3: printHexImm

示例4: printSysCROperand

示例5: printPCRelOperand

示例6: printS16ImmOperand_Mem

示例7: printPCRelImm

示例8: printLogicalImm64

示例9: printOperand

示例10: printMemOperand

示例11: printU8Imm

示例12: printOperand

示例13: printPCRelImm

示例14: printCCOperand

示例15: printBarrierOption

示例16: printMemOffset

示例17: printSparcAliasInstr

示例18: printCondCode

示例19: printOperand

示例20: printVectorIndex

请发表评论

全部评论

上一篇：

下一篇：

Delphi 日志记录和查看

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053