C++ MATCH_MARK函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MATCH_MARK函数的典型用法代码示例。如果您正苦于以下问题：C++ MATCH_MARK函数的具体用法？C++ MATCH_MARK怎么用？C++ MATCH_MARK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MATCH_MARK函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: if

bool IRrecv::decodeLightStrike(decode_results *results) {
	long  data = 0;  // We decode in to here; Start with nothing
	int   offset = 1;  // Index in to results; Skip first entry!?

	// Check header "mark"
	if (!MATCH_MARK(results->rawbuf[offset], LS_HDR_MARK))  return false;

	// Check we have enough data
	if (irparams.rawlen < (2 * LS_BITS) + 2) 
		return false;

	// Build the data
	for (int i = 0; i < LS_BITS; i++) {
		// Determine if the bit is a 1 or 0
		offset++;
		if (MATCH_SPACE(results->rawbuf[offset], LS_ONE_SPACE))
			data = (data << 1) | 1;
		else if (MATCH_SPACE(results->rawbuf[offset], LS_ZERO_SPACE))
			data = (data << 1) | 0;
		else
			return false;

		// Check data "mark"
		offset++;
		if (!MATCH_MARK(results->rawbuf[offset], LS_BIT_MARK))
			return false;
	}

	// Success
	results->bits = LS_BITS;
	results->value = data;
	results->decode_type = LIGHTSTRIKE;

	return true;
}

开发者ID:Corom，项目名称:Arduino-IRremote，代码行数:35，代码来源:ir_LightStrike.cpp

示例2: decodeTagShot

bool  IRrecv::decodeTagShot (decode_results *results)
{
	unsigned long  data   = 0;  // Somewhere to build our code
	int            offset = 1;  // Skip the Gap reading

	// Check we have the right amount of data
	if (irparams.rawlen != 1 + 2 + (2 * BITS) + 1)  return false ;

	// Check initial Mark+Space match
	if (!MATCH_MARK (results->rawbuf[offset++], HDR_MARK ))  return false ;
	if (!MATCH_SPACE(results->rawbuf[offset++], HDR_SPACE))  return false ;

	// Read the bits in
	for (int i = 0;  i < BITS;  i++) {
		// Each bit looks like: MARK + SPACE_1 -> 1
		//                 or : MARK + SPACE_0 -> 0
		if (!MATCH_MARK(results->rawbuf[offset++], BIT_MARK))  return false ;

		// IR data is big-endian, so we shuffle it in from the right:
		if      (MATCH_SPACE(results->rawbuf[offset], ONE_SPACE))   data = (data << 1) | 1 ;
		else if (MATCH_SPACE(results->rawbuf[offset], ZERO_SPACE))  data = (data << 1) | 0 ;
		else                                                        return false ;
		offset++;
	}

	// Success
	results->bits        = BITS;
	results->value       = data;
	results->decode_type = TAGSHOT;
	return true;
}

开发者ID:phillipblevins，项目名称:Arduino-IRremote，代码行数:31，代码来源:ir_TagShot.cpp

示例3: if

bool  IRrecv::decodeLG (decode_results *results)
{
    long  data   = 0;
    int   offset = 1; // Skip first space

	// Check we have the right amount of data
    if (irparams.rawlen < (2 * LG_BITS) + 1 )  return false ;

    // Initial mark/space
    if (!MATCH_MARK(results->rawbuf[offset++], LG_HDR_MARK))  return false ;
    if (!MATCH_SPACE(results->rawbuf[offset++], LG_HDR_SPACE))  return false ;

    for (int i = 0;  i < LG_BITS;  i++) {
        if (!MATCH_MARK(results->rawbuf[offset++], LG_BIT_MARK))  return false ;

        if      (MATCH_SPACE(results->rawbuf[offset], LG_ONE_SPACE))   data = (data << 1) | 1 ;
        else if (MATCH_SPACE(results->rawbuf[offset], LG_ZERO_SPACE))  data = (data << 1) | 0 ;
        else                                                           return false ;
        offset++;
    }

    // Stop bit
    if (!MATCH_MARK(results->rawbuf[offset], LG_BIT_MARK))   return false ;

    // Success
    results->bits        = LG_BITS;
    results->value       = data;
    results->decode_type = LG;
    return true;
}

开发者ID:Brawn1，项目名称:Arduino_Experimente，代码行数:30，代码来源:ir_LG.cpp

示例4: decodePanasonic

bool  IRrecv::decodePanasonic ()
{
    unsigned long long  data   = 0;
    int                 offset = 1;

    if (!MATCH_MARK(irparams.rawbuf[offset++], PANASONIC_HDR_MARK ))  return false ;
    if (!MATCH_MARK(irparams.rawbuf[offset++], PANASONIC_HDR_SPACE))  return false ;

    // decode address
    for (int i = 0;  i < PANASONIC_BITS;  i++) {
        if (!MATCH_MARK(irparams.rawbuf[offset++], PANASONIC_BIT_MARK))  return false ;

        if      (MATCH_SPACE(irparams.rawbuf[offset],PANASONIC_ONE_SPACE ))  data = (data << 1) | 1 ;
        else if (MATCH_SPACE(irparams.rawbuf[offset],PANASONIC_ZERO_SPACE))  data = (data << 1) | 0 ;
        else                                                                 return false ;
        offset++;
    }

    results.value       = (unsigned long)data;
    results.address     = (unsigned int)(data >> 32);
    results.decode_type = PANASONIC;
    results.bits        = PANASONIC_BITS;

    return true;
}

开发者ID:DrDiettrich，项目名称:Arduino-IRremote，代码行数:25，代码来源:ir_Panasonic.cpp

示例5: decodePanasonic

long IRrecvSF::decodePanasonic(decode_resultsSF *results) {
    unsigned long long data = 0;
    int offset = 1;
    
    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_MARK)) {
        return ERR;
    }
    offset++;
    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_SPACE)) {
        return ERR;
    }
    offset++;
    
    // decode address
    for (int i = 0; i < PANASONIC_BITS; i++) {
        if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_BIT_MARK)) {
            return ERR;
        }
        if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ONE_SPACE)) {
            data = (data << 1) | 1;
        } else if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ZERO_SPACE)) {
            data <<= 1;
        } else {
            return ERR;
        }
        offset++;
    }
    results->value = (unsigned long)data;
    results->panasonicAddress = (unsigned int)(data >> 32);
    results->decode_type = PANASONIC;
    results->bits = PANASONIC_BITS;
    return DECODED;
}

开发者ID:Eih3，项目名称:v0.83，代码行数:33，代码来源:IRremoteSF.cpp

示例6: MATCH_MARK

bool IRRemote::decodeSAMSUNG(int rawlen)

{
    long data = 0;
    int offset = 1; // Skip first space
    // Initial mark
    if (!MATCH_MARK(_rawbuf[offset], SAMSUNG_HDR_MARK))
    {
        return false;
    }
    offset++;
    // Check for repeat
    if (rawlen == 4 && MATCH_SPACE(_rawbuf[offset], SAMSUNG_RPT_SPACE)
            && MATCH_MARK(_rawbuf[offset + 1], SAMSUNG_BIT_MARK))
    {
        _bits = 0;
        _value = REPEAT;
        _decode_type = SAMSUNG;
        //TODO  see what happens if return false on repeat
        //return true;
        return false;
    }
    else if (rawlen < 2 * SAMSUNG_BITS + 4)
    {
        return false;
    }
    // Initial space
    if (!MATCH_SPACE(_rawbuf[offset], SAMSUNG_HDR_SPACE))
    {
        return false;
    }
    offset++;
    for (int i = 0; i < SAMSUNG_BITS; i++)
    {
        if (!MATCH_MARK(_rawbuf[offset], SAMSUNG_BIT_MARK))
        {
            return false;
        }
        offset++;
        if (MATCH_SPACE(_rawbuf[offset], SAMSUNG_ONE_SPACE))
        {
            data = (data << 1) | 1;
        }
        else if (MATCH_SPACE(_rawbuf[offset], SAMSUNG_ZERO_SPACE))
        {
            data <<= 1;
        }
        else
        {
            return false;
        }
        offset++;
    }
    // Success
    _bits = SAMSUNG_BITS;
    _value = data;
    _decode_type = SAMSUNG;
    return true;
}

开发者ID:nihuyaka，项目名称:libarmpit-cortex，代码行数:59，代码来源:IRremote.cpp

示例7: if

long IRrecv::decodeWhynter(decode_results *results) {
  long data = 0;
  
  if (irparams.rawlen < 2 * WHYNTER_BITS + 6) {
     return ERR;
  }
  
  int offset = 1; // Skip first space


  // sequence begins with a bit mark and a zero space
  if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_BIT_MARK)) {
    return ERR;
  }
  offset++;
  if (!MATCH_SPACE(results->rawbuf[offset], WHYNTER_ZERO_SPACE)) {
    return ERR;
  }
  offset++;

  // header mark and space
  if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_HDR_MARK)) {
    return ERR;
  }
  offset++;
  if (!MATCH_SPACE(results->rawbuf[offset], WHYNTER_HDR_SPACE)) {
    return ERR;
  }
  offset++;

  // data bits
  for (int i = 0; i < WHYNTER_BITS; i++) {
    if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_BIT_MARK)) {
      return ERR;
    }
    offset++;
    if (MATCH_SPACE(results->rawbuf[offset], WHYNTER_ONE_SPACE)) {
      data = (data << 1) | 1;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset],WHYNTER_ZERO_SPACE)) {
      data <<= 1;
    } 
    else {
      return ERR;
    }
    offset++;
  }
  
  // trailing mark
  if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_BIT_MARK)) {
    return ERR;
  }
  // Success
  results->bits = WHYNTER_BITS;
  results->value = data;
  results->decode_type = WHYNTER;
  return DECODED;
}

开发者ID:Leenix，项目名称:Tengu，代码行数:58，代码来源:IRremoteESP8266.cpp

示例8: while

bool  IRrecv::decodeMitsubishi (decode_results *results)
{
  // Serial.print("?!? decoding Mitsubishi:");Serial.print(irparams.rawlen); Serial.print(" want "); Serial.println( 2 * MITSUBISHI_BITS + 2);
  long data = 0;
  if (irparams.rawlen < 2 * MITSUBISHI_BITS + 2)  return false ;
  int offset = 0; // Skip first space
  // Initial space

#if 0
  // Put this back in for debugging - note can't use #DEBUG as if Debug on we don't see the repeat cos of the delay
  Serial.print("IR Gap: ");
  Serial.println( results->rawbuf[offset]);
  Serial.println( "test against:");
  Serial.println(results->rawbuf[offset]);
#endif

#if 0
  // Not seeing double keys from Mitsubishi
  if (results->rawbuf[offset] < MITSUBISHI_DOUBLE_SPACE_USECS) {
    // Serial.print("IR Gap found: ");
    results->bits = 0;
    results->value = REPEAT;
    results->decode_type = MITSUBISHI;
    return true;
  }
#endif

  offset++;

  // Typical
  // 14200 7 41 7 42 7 42 7 17 7 17 7 18 7 41 7 18 7 17 7 17 7 18 7 41 8 17 7 17 7 18 7 17 7

  // Initial Space
  if (!MATCH_MARK(results->rawbuf[offset], MITSUBISHI_HDR_SPACE))  return false ;
  offset++;

  while (offset + 1 < irparams.rawlen) {
    if      (MATCH_MARK(results->rawbuf[offset], MITSUBISHI_ONE_MARK))   data = (data << 1) | 1 ;
    else if (MATCH_MARK(results->rawbuf[offset], MITSUBISHI_ZERO_MARK))  data <<= 1 ;
    else                                                                 return false ;
    offset++;

    if (!MATCH_SPACE(results->rawbuf[offset], MITSUBISHI_HDR_SPACE))  break ;
    offset++;
  }

  // Success
  results->bits = (offset - 1) / 2;
  if (results->bits < MITSUBISHI_BITS) {
    results->bits = 0;
    return false;
  }

  results->value       = data;
  results->decode_type = MITSUBISHI;
  return true;
}

开发者ID:1OOSUR，项目名称:Arduino-IRremote，代码行数:57，代码来源:ir_Mitsubishi.cpp

示例9: while

long IRrecv::decodeSony(decode_results *results) {
  long data = 0;
  if (irparams.rawlen < 2 * SONY_BITS + 2) {
    return ERR;
  }
  int offset = 0; // Dont skip first space, check its size

  // Some Sony's deliver repeats fast after first
  // unfortunately can't spot difference from of repeat from two fast clicks
  if (results->rawbuf[offset] < SONY_DOUBLE_SPACE_USECS) {
    // Serial.print("IR Gap found: ");
    results->bits = 0;
    results->value = REPEAT;
#ifdef SANYO
    results->decode_type = SANYO;
#else
    results->decode_type = UNKNOWN;
#endif
    return DECODED;
  }
  offset++;

  // Initial mark
  if (!MATCH_MARK(results->rawbuf[offset], SONY_HDR_MARK)) {
    return ERR;
  }
  offset++;

  while (offset + 1 < irparams.rawlen) {
    if (!MATCH_SPACE(results->rawbuf[offset], SONY_HDR_SPACE)) {
      break;
    }
    offset++;
    if (MATCH_MARK(results->rawbuf[offset], SONY_ONE_MARK)) {
      data = (data << 1) | 1;
    } 
    else if (MATCH_MARK(results->rawbuf[offset], SONY_ZERO_MARK)) {
      data <<= 1;
    } 
    else {
      return ERR;
    }
    offset++;
  }

  // Success
  results->bits = (offset - 1) / 2;
  if (results->bits < 12) {
    results->bits = 0;
    return ERR;
  }
  results->value = data;
  results->decode_type = SONY;
  return DECODED;
}

开发者ID:sstefanov，项目名称:Arduino-IRremote，代码行数:55，代码来源:IRremote.cpp

示例10: decodeJVC

static long decodeJVC(decode_results *results) {
  long data = 0;
  int offset = 1; // Skip first space
  int i = 0;

  // Check for repeat
  if (irparams.rawlen - 1 == 33 &&
      MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK) &&
      MATCH_MARK(results->rawbuf[irparams.rawlen-1], JVC_BIT_MARK)) {
    results->bits = 0;
    results->value = REPEAT;
    results->decode_type = JVC;
    return DECODED;
  } 

  // Initial mark
  if (!MATCH_MARK(results->rawbuf[offset], JVC_HDR_MARK)) {
    return ERR;
  }
  offset++; 
  if (irparams.rawlen < 2 * JVC_BITS + 1 ) {
    return ERR;
  }
  // Initial space 
  if (!MATCH_SPACE(results->rawbuf[offset], JVC_HDR_SPACE)) {
    return ERR;
  }
  offset++;
  for (i = 0; i < JVC_BITS; i++) {
    if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK)) {
      return ERR;
    }
    offset++;
    if (MATCH_SPACE(results->rawbuf[offset], JVC_ONE_SPACE)) {
      data = (data << 1) | 1;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset], JVC_ZERO_SPACE)) {
      data <<= 1;
    } 
    else {
      return ERR;
    }
    offset++;
  }
  // Stop bit
  if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK)){
    return ERR;
  }
  // Success
  results->bits = JVC_BITS;
  results->value = data;
  results->decode_type = JVC;
  return DECODED;
}

开发者ID:Mpic，项目名称:avr，代码行数:54，代码来源:irrecv.c

示例11: decodeSAMSUNG

long IRrecv::decodeSAMSUNG(decode_results *results) {
 long data = 0;
 int offset = 1; // Skip first space
 
 float	kShrink = .9;// GRR - "shrink" recieved sequence
 decValue.value = 0;
 
 // Initial mark
 if (!MATCH_MARK(results->rawbuf[offset]*kShrink, SAMSUNG_HDR_MARK)) {
 decValue.value = 0;//2 //GRR for debugging
 return ERR;
 }
 offset++;

 // Check bits
 if (irparams.rawlen < 2 * SAMSUNG_BITS + 4) {
 decValue.value = 0;//3 //GRR for debugging
 return ERR;
 }

 // Initial space
 if (!MATCH_SPACE(results->rawbuf[offset]*kShrink, SAMSUNG_HDR_SPACE)) {
 decValue.value = 0;//4 //GRR for debugging
 return ERR;
 }
 offset++;
 //Serial.println("OFFSET");
 //Serial.println(offset);

 for (int i = 0; i < SAMSUNG_BITS; i++) {
 if (!MATCH_MARK(results->rawbuf[offset]*kShrink, SAMSUNG_BIT_MARK)) {
 decValue.value = 0;//5 //GRR for debugging
 return ERR;
 }
 offset++;
 if (MATCH_SPACE(results->rawbuf[offset]*kShrink, SAMSUNG_ONE_SPACE)) {
 data = (data << 1) | 1;
 }
 else if (MATCH_SPACE(results->rawbuf[offset]*kShrink, SAMSUNG_ZERO_SPACE)) {
 data <<= 1;
 }
 else {
 decValue.value = 0;//6 //GRR for debugging
 return ERR;
 }
 offset++;
 }
 // Success
 decValue.value = data;
 results->bits = SAMSUNG_BITS;
 results->value = data;
 results->decode_type = SAMSUNG;
 return DECODED;
}

开发者ID:rusgon，项目名称:IRremoteSendRecv，代码行数:54，代码来源:IRremoteSendRecv.cpp

示例12: while

long IRrecv::decodeAiwaRCT501(decode_results *results) {
  int data = 0;
  int offset = 1; // skip first garbage read

  // Check SIZE
  if(irparams.rawlen < 2 * (AIWA_RC_T501_SUM_BITS) + 4) {
    return ERR;
  }
  
  // Check HDR
  if(!MATCH_MARK(results->rawbuf[offset], AIWA_RC_T501_HDR_MARK)) {
    return ERR;
  }
  offset++;

  // Check HDR space
  if(!MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_HDR_SPACE)) {
    return ERR;
  }
  offset++;

  offset += 26; // skip pre-data - optional
  while(offset < irparams.rawlen - 4) {
    if(MATCH_MARK(results->rawbuf[offset], AIWA_RC_T501_BIT_MARK)) {
      offset++;
    } 
    else {
      return ERR;
    }
    
    // ONE & ZERO
    if(MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ONE_SPACE)) {
      data = (data << 1) | 1;
    } 
    else if(MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ZERO_SPACE)) {
      data <<= 1;
    } 
    else {
      // End of one & zero detected
      break;
    }
    offset++;
  }
  
  results->bits = (offset - 1) / 2;
  if(results->bits < 42) {
    return ERR;
  }
  results->value = data;
  results->decode_type = AIWA_RC_T501;
  return DECODED;
}

开发者ID:AllAboutEE，项目名称:Arduino-IRremote，代码行数:52，代码来源:Shirriff_AiwaRCT501.cpp

示例13: while

long IRrecv::decodeRCMM(decode_results *results) {
  long data = 0;
  if (irparams.rawlen < RCMM_BITS + 4) {
    return ERR;
  }
  int offset = 1; // Skip first space
  // Initial mark
  if (!MATCH_MARK(results->rawbuf[offset], RCMM_HDR_MARK)) {
    return ERR;
  }
  offset++;
  if (!MATCH_SPACE(results->rawbuf[offset], RCMM_SPACE)) {
    return ERR;
  }
  offset++;

  while (offset + 1 < irparams.rawlen) {
    if (!MATCH_MARK(results->rawbuf[offset], RCMM_MARK)) {
      return ERR;
    }
    offset++;
    if (MATCH_SPACE(results->rawbuf[offset], RCMM_SPACE)) {
		data = (data << 2) | 0;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset], RCMM_SPACE+RCMM_INCREMENT)) {
		data = (data << 2) | 1;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset], RCMM_SPACE+2*RCMM_INCREMENT)) {
		data = (data << 2) | 2;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset], RCMM_SPACE+3*RCMM_INCREMENT)) {
		data = (data << 2) | 3;
    } 
    else {
      return ERR;
    }
    offset++;
  }
  if (!MATCH_MARK(results->rawbuf[offset], RCMM_MARK)) {
    return ERR;
  }

  // Success
  results->bits = (offset - 3);
  if (results->bits < RCMM_BITS) {
    results->bits = 0;
    return ERR;
  }
  results->value = data;
  results->decode_type = RCMM;
  return DECODED;
}

开发者ID:microtherion，项目名称:Arduino-IRremote，代码行数:52，代码来源:IRremote.cpp

示例14: decodeSamsung

//Samsung TV codes imported from http://www.maartendamen.com/2010/05/jeenode-infrared-project-part-1-getting-started/
long IRrecv::decodeSamsung(decode_results *results) {
 long data = 0;
 int offset = 1; // Skip first space

 // Check bits
if (irparams.rawlen < 2 * SAMSUNG_BITS + 4 && irparams.rawlen != 6) {
	return ERR;
 }
 
 // Initial mark
 if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG_HDR_MARK)) {
	return ERR;
 }
 offset++;
  
 // Initial space
 if (!MATCH_SPACE(results->rawbuf[offset], SAMSUNG_HDR_SPACE)) {
	return ERR;
 }
 offset++;
 //Serial.println("OFFSET");
 //Serial.println(offset);
 
 for (int i = 0; i < SAMSUNG_BITS; i++) {
	 if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG_BIT_MARK)) {
		return ERR;
	 }
	 offset++;	 
	 if (offset == irparams.rawlen)
	 {
		results->bits = SAMSUNG_BITS;
		results->value = REPEAT;
		results->decode_type = SAMSUNG;
		return DECODED;
	 }
	 if (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ONE_SPACE)) {
		data = (data << 1) | 1;
	 }
	 else if (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ZERO_SPACE)) {
		data <<= 1;		
	 }
	 else {
		return ERR;
	 }
	 offset++;
 }
 // Success
 results->bits = SAMSUNG_BITS;
 results->value = data;
 results->decode_type = SAMSUNG;
 return DECODED;
}

开发者ID:imclab，项目名称:moonlander-trails，代码行数:53，代码来源:IRremote2.cpp

示例15: IRrecv_decodeNEC

// NECs have a repeat only 4 items long
u32 IRrecv_decodeNEC(decode_results *results)
{
    u32 data = 0;
    u16 offset = 1; // Skip first space
    u16 i;
  // Initial mark
  if (!MATCH_MARK(results->rawbuf[offset], NEC_HDR_MARK)) {
    return ERR;
  }
  offset++;
  // Check for repeat
  if (irparams.rawlen == 4 &&
    MATCH_SPACE(results->rawbuf[offset], NEC_RPT_SPACE) &&
    MATCH_MARK(results->rawbuf[offset+1], NEC_BIT_MARK)) {
    results->bits = 0;
    results->value = REPEAT;
    results->decode_type = NEC;
    return DECODED;
  }
  if (irparams.rawlen < 2 * NEC_BITS + 4) {
    return ERR;
  }
  // Initial space  
  if (!MATCH_SPACE(results->rawbuf[offset], NEC_HDR_SPACE)) {
    return ERR;
  }
  offset++;
  
  for (i = 0; i < NEC_BITS; i++) {
    if (!MATCH_MARK(results->rawbuf[offset], NEC_BIT_MARK)) {
      return ERR;
    }
    offset++;
    if (MATCH_SPACE(results->rawbuf[offset], NEC_ONE_SPACE)) {
      data = (data << 1) | 1;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset], NEC_ZERO_SPACE)) {
      data <<= 1;
    } 
    else {
      return ERR;
    }
    offset++;
  }
  // Success
  results->bits = NEC_BITS;
  results->value = data;
  results->decode_type = NEC;
  return DECODED;
}

开发者ID:jimgregory，项目名称:pinguino-libraries，代码行数:51，代码来源:IRremote.c

示例16: while

long IRrecv::decodeSony(decode_results *results) {
  unsigned long data = 0;
  if (irparams.rawlen < 2 * SONY_BITS + 2) {
    return ERR;
  }
  int offset = 1; // Skip first space
  // Initial mark
  if (!MATCH_MARK(results->rawbuf[offset], SONY_HDR_MARK)) {
    return ERR;
  }
  offset++;

  while (offset + 1 < irparams.rawlen) {
    if (!MATCH_SPACE(results->rawbuf[offset], SONY_HDR_SPACE)) {
      break;
    }
    offset++;
    if (MATCH_MARK(results->rawbuf[offset], SONY_ONE_MARK)) {
      data = (data << 1) | 1;
    } 
    else if (MATCH_MARK(results->rawbuf[offset], SONY_ZERO_MARK)) {
      data <<= 1;
    } 
    else {
      return ERR;
    }
    offset++;
  }

  // Success
  results->bits = (offset - 1) / 2;
  if (results->bits < 12) {
    results->bits = 0;
    return ERR;
  }
  results->value = data;
  results->decode_type = SONY;
/*  
  for ( debugPos = 0; debugPos < 32; debugPos ++ ) {
	  if ( (results->value >> (32 - debugPos) ) & 0x1 == 0x1 ) {
		  results->debugBuffer[debugPos] = 0xff;
	  }
	  else {
		  results->debugBuffer[debugPos] = 0x1;
	  }
  }
 */ 
  return DECODED;
}

开发者ID:billbsing，项目名称:tv-monitor，代码行数:49，代码来源:IRremote.cpp

示例17: if

long IRrecv::decodePanasonic(decode_results *results) {
    unsigned long data = 0;
    int offset = 1;

    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_MARK)) {
        return ERR;
    }
    offset++;
    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_SPACE)) {
        return ERR;
    }
    offset++;

    // decode address
    for (int i = 0; i < 32; i++) {
        if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_BIT_MARK)) {
            return ERR;
        }
        if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ONE_SPACE)) {
            data = (data << 1) | 1;
        } else if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ZERO_SPACE)) {
            data <<= 1;
        } else {
            return ERR;
        }
        offset++;
    }
    results->address = data;
    data = 0;
    for (int i = 0; i < 16; i++) {
        if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_BIT_MARK)) {
            return ERR;
        }
        if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ONE_SPACE)) {
            data = (data << 1) | 1;
        } else if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ZERO_SPACE)) {
            data <<= 1;
        } else {
            return ERR;
        }
        offset++;
    }
    results->value = data;

    results->decode_type = PANASONIC;
    results->bits = 48;
    return DECODED;
}

开发者ID:shineangelic，项目名称:Domino，代码行数:48，代码来源:IRremote.cpp

示例18: decodeLS

long IRrecv::decodeLS(decode_results *results) {
  long data = 0;
  /*if (irparams.rawlen < 2 * SONY_BITS + 2) {
    return ERR;
  }*/
  int offset = 1; // Skip first space
  // Initial mark
  if (!MATCH_MARK(results->rawbuf[offset], LS_HDR_MARK)) {
    return ERR;
  }
  offset++;

  // Initial space  
  if (!MATCH_SPACE(results->rawbuf[offset], LS_HDR_SPACE)) {
    return ERR;
  }
  offset++;
  for (int i = 0; i < 31; i++) {
    if (!MATCH_MARK(results->rawbuf[offset], LS_BIT_MARK)) {
      Serial.println("Err");
      return ERR;
    }
    offset++;
    if (MATCH_SPACE(results->rawbuf[offset], LS_ONE_SPACE)) {
      data = (data << 1) | 1;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset], LS_ZERO_SPACE)) {
      data <<= 1;
    } 
    else {
      Serial.print("Err: ");
      Serial.println(i);

      return ERR;
    }
    offset++;
  }

  // Success
  results->bits = (offset - 1) / 2;
  /*if (results->bits < 12) {
    results->bits = 0;
    return ERR;
  }*/
  results->value = data;
  results->decode_type = LS;
  return DECODED;
}

开发者ID:LightStrikePlusPlus，项目名称:LightStrikeDecode，代码行数:48，代码来源:IRremote.cpp

示例19: MATCH_SPACE

// SAMSUNGs have a repeat only 4 items long
long IRrecv::decodeSAMSUNG(decode_results *results) {
  long data = 0;
  int offset = 1; // Skip first space
  // Initial mark
  if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG_HDR_MARK)) {
    return ERR;
  }
  offset++;
  // Check for repeat
  if (irparams.rawlen == 4 &&
    MATCH_SPACE(results->rawbuf[offset], SAMSUNG_RPT_SPACE) &&
    MATCH_MARK(results->rawbuf[offset+1], SAMSUNG_BIT_MARK)) {
    results->bits = 0;
    results->value = REPEAT;
    results->decode_type = SAMSUNG;
    return DECODED;
  }
  if (irparams.rawlen < 2 * SAMSUNG_BITS + 4) {
    return ERR;
  }
  // Initial space  
  if (!MATCH_SPACE(results->rawbuf[offset], SAMSUNG_HDR_SPACE)) {
    return ERR;
  }
  offset++;
  for (int i = 0; i < SAMSUNG_BITS; i++) {
    if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG_BIT_MARK)) {
      return ERR;
    }
    offset++;
    if (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ONE_SPACE)) {
      data = (data << 1) | 1;
    } 
    else if (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ZERO_SPACE)) {
      data <<= 1;
    } 
    else {
      return ERR;
    }
    offset++;
  }
  // Success
  results->bits = SAMSUNG_BITS;
  results->value = data;
  results->decode_type = SAMSUNG;
  return DECODED;
}

开发者ID:mdillmann，项目名称:goDMD，代码行数:48，代码来源:IRremote.cpp

示例20: if

long IRrecv::decodeSamsung2(decode_results *results) {
    unsigned long long data = 0;
    int offset = 1;
    
	if (irparams.rawlen < 78)
	{
		return ERR;
	}
	
    if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG2_HDR_MARK)) {
        return ERR;
    }
    offset++;
    if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG2_HDR_SPACE)) {
        return ERR;
    }
    offset++;
    
    // decode address
    for (int i = 0; i < SAMSUNG2_BITS; i++) {
        if (!MATCH_MARK(results->rawbuf[offset++], SAMSUNG2_BIT_MARK)) {
            return ERR;
        }
		if (offset == 36)
		{
			if (!MATCH_SPACE(results->rawbuf[offset],SAMSUNG2_HDR_SPACE)) {
				return ERR;
			}
		}
		else
		{
			if (MATCH_SPACE(results->rawbuf[offset],SAMSUNG2_ONE_SPACE)) {
				data = (data << 1) | 1;
			} else if (MATCH_SPACE(results->rawbuf[offset],SAMSUNG2_ZERO_SPACE)) {
				data <<= 1;
			} else {
				return ERR;
			}
		}
        offset++;
    }
    results->value = (unsigned long)data << 12 ;
    results->panasonicAddress = (unsigned int)(data >> 20);
    results->decode_type = SAMSUNG2;
    results->bits = SAMSUNG2_BITS;
    return DECODED;
}

开发者ID:imclab，项目名称:moonlander-trails，代码行数:47，代码来源:IRremote2.cpp

注：本文中的MATCH_MARK函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MATCH_SPACE函数代码示例发布时间：2022-05-30

C++ MATCH函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19241|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10001|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8647|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9672|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8006|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8668|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ MATCH_MARK函数代码示例

示例1: if

示例2: decodeTagShot

示例3: if

示例4: decodePanasonic

示例5: decodePanasonic

示例6: MATCH_MARK

示例7: if

示例8: while

示例9: while

示例10: decodeJVC

示例11: decodeSAMSUNG

示例12: while

示例13: while

示例14: decodeSamsung

示例15: IRrecv_decodeNEC

示例16: while

示例17: if

示例18: decodeLS

示例19: MATCH_SPACE

示例20: if

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

DELPHI根据进程名强制关闭进程

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053