C++ MAKE_CL_MESSAGE函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MAKE_CL_MESSAGE函数的典型用法代码示例。如果您正苦于以下问题：C++ MAKE_CL_MESSAGE函数的具体用法？C++ MAKE_CL_MESSAGE怎么用？C++ MAKE_CL_MESSAGE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MAKE_CL_MESSAGE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: connectionHandleReadRemoteSupportedFeaturesRequest

/****************************************************************************
NAME	
    connectionHandleReadRemoteSupportedFeaturesRequest

DESCRIPTION
    Request to read the supported features of a remote device.

RETURNS
    void
*/
void connectionHandleReadRemoteSupportedFeaturesRequest(connectionReadInfoState *state, const CL_INTERNAL_DM_READ_REMOTE_SUPP_FEAT_REQ_T *req)
{
	/* Check the resource lock */
	if (!state->stateInfoLock)
	{
		bdaddr addr;

		/* Check we got a valid addr */
		if (!SinkGetBdAddr(req->sink, &addr))
		{
			/* Send an error to the app as it didn't pass in a valid sink */
			sendRemoteSupportedFeaturesCfm(req->theAppTask, hci_error_no_connection, 0, req->sink);		
		}
		else
		{
			/* Response not outstanding so issue request */
			MAKE_PRIM_C(DM_HCI_READ_REMOTE_FEATURES);
			connectionConvertBdaddr_t(&prim->bd_addr, &addr);
			VmSendDmPrim(prim);

			/* Set the lock */
			state->stateInfoLock = req->theAppTask;
			state->sink = req->sink;
		}		
	}
	else
	{
		/* Lock set so queue up the request */
		MAKE_CL_MESSAGE(CL_INTERNAL_DM_READ_REMOTE_SUPP_FEAT_REQ);
		COPY_CL_MESSAGE(req, message);
		MessageSendConditionallyOnTask(connectionGetCmTask(), CL_INTERNAL_DM_READ_REMOTE_SUPP_FEAT_REQ, message, &state->stateInfoLock);
	}
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:43，代码来源:dm_info_handler.c

示例2: connectionHandleDmHciModeChangeEvent

/****************************************************************************
NAME	
    connectionHandleDmHciModeChangeEvent

DESCRIPTION
    An indication from BlueStack that an ACL has been opened. Some clients
	may need this information so pass the indication up to the task 
	registered as the "app task" (we don't know who else to pass this to!).

RETURNS
    void
*/
void connectionHandleDmHciModeChangeEvent(Task task, const DM_HCI_MODE_CHANGE_EVENT_T *ev)
{
    const msg_filter *msgFilter = connectionGetMsgFilter();
	if (task && (msgFilter[0] & msg_group_mode_change)) 
    {
		/* Check mode change was successful */
		if ((ev->status == HCI_SUCCESS) && ((ev->mode == HCI_BT_MODE_ACTIVE) || (ev->mode == HCI_BT_MODE_SNIFF)))
		{
			MAKE_CL_MESSAGE(CL_DM_MODE_CHANGE_EVENT);
			connectionConvertBdaddr(&message->bd_addr, &ev->bd_addr);

			/* Convert HCI mode into connection library power mode */
			switch (ev->mode)
			{
				case HCI_BT_MODE_ACTIVE:
					message->mode = lp_active;
					break;
				case HCI_BT_MODE_SNIFF:
					message->mode = lp_sniff;
					break;
				default:
					Panic();
					break;
			}
			message->interval = ev->length;
			MessageSend(task, CL_DM_MODE_CHANGE_EVENT, message);
		}
    }
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:41，代码来源:dm_info_handler.c

示例3: ConnectionReadClassOfDevice

void ConnectionReadClassOfDevice(Task theAppTask)
{
    /* Create internal message and sent to the CL */
    MAKE_CL_MESSAGE(CL_INTERNAL_DM_READ_CLASS_OF_DEVICE_REQ);
    message->theAppTask = theAppTask;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_DM_READ_CLASS_OF_DEVICE_REQ, message);
}

开发者ID:stephen-kun，项目名称:koovox_adk4.0，代码行数:7，代码来源:ConnectionReadClassOfDevice.c

示例4: ConnectionSmSendKeypressNotificationRequest

void ConnectionSmSendKeypressNotificationRequest(const bdaddr* bd_addr, cl_sm_keypress_type type)
{
	MAKE_CL_MESSAGE(CL_INTERNAL_SM_SEND_KEYPRESS_NOTIFICATION_REQ);
	message->bd_addr = *bd_addr;
	message->type = type;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_SM_SEND_KEYPRESS_NOTIFICATION_REQ, message);
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:7，代码来源:ConnectionSmSendKeypressNotificationRequest.c

示例5: ConnectionWriteClassOfDevice

void ConnectionWriteClassOfDevice(uint32 cod)
{
    /* All requests are sent through the internal state handler */
    MAKE_CL_MESSAGE(CL_INTERNAL_DM_WRITE_CLASS_OF_DEVICE_REQ);
    message->class_of_device = cod;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_DM_WRITE_CLASS_OF_DEVICE_REQ, message);
}

开发者ID:stephen-kun，项目名称:koovox_adk4.0，代码行数:7，代码来源:dm_baseband_cod.c

示例6: ConnectionSmUnRegisterOutgoingService

void ConnectionSmUnRegisterOutgoingService(const bdaddr* bd_addr, dm_protocol_id protocol_id, uint32 channel)
{
#ifdef CONNECTION_DEBUG_LIB
    if ((protocol_id != protocol_l2cap) && (protocol_id != protocol_rfcomm))
    {
        CL_DEBUG(("Out of range protocol id 0x%x\n", protocol_id));
    }

    /* TODO: Check if we should check channel range for outgoing service channel */
    if((protocol_id == protocol_rfcomm) &&
            ((channel < RFCOMM_SERVER_CHANNEL_MIN) ||
                    (channel > RFCOMM_SERVER_CHANNEL_MAX))
        )
    {
        CL_DEBUG(("Out of range RFCOMM server channel 0x%lx\n", channel));
    }

    if(bd_addr == NULL)
    {
       CL_DEBUG(("Out of range Bluetooth Address 0x%p\n", (void*)bd_addr)); 
    }
#endif

    {
        MAKE_CL_MESSAGE(CL_INTERNAL_SM_UNREGISTER_OUTGOING_REQ);
        message->bd_addr = *bd_addr;
        message->protocol_id = protocol_id;
        message->channel = channel;
        MessageSend(connectionGetCmTask(), CL_INTERNAL_SM_UNREGISTER_OUTGOING_REQ, message);
    }
}

开发者ID:stephen-kun，项目名称:csr8670，代码行数:31，代码来源:ConnectionSmUnRegisterOutgoingService.c

示例7: ConnectionRfcommDeallocateChannel

void ConnectionRfcommDeallocateChannel(Task theAppTask, uint8 local_server_channel)
{
    MAKE_CL_MESSAGE(CL_INTERNAL_RFCOMM_UNREGISTER_REQ);
    message->theAppTask = theAppTask;
    message->local_server_channel = local_server_channel;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_RFCOMM_UNREGISTER_REQ, message);
}

开发者ID:stephen-kun，项目名称:koovox_adk4.0，代码行数:7，代码来源:rfc.c

示例8: ConnectionRfcommDisconnectResponse

void ConnectionRfcommDisconnectResponse(Sink sink)
{
	/* Send an internal message */
	MAKE_CL_MESSAGE(CL_INTERNAL_RFCOMM_DISCONNECT_RSP);
    message->sink = sink;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_RFCOMM_DISCONNECT_RSP, message);
}

开发者ID:stephen-kun，项目名称:koovox_adk4.0，代码行数:7，代码来源:rfc.c

示例9: ConnectionClearParameterCache

void ConnectionClearParameterCache(const bdaddr *addr)
{
    /* Send an internal message requesting this action */
    MAKE_CL_MESSAGE(CL_INTERNAL_DM_CLEAR_PARAM_CACHE_REQ);
    message->bd_addr = *addr;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_DM_CLEAR_PARAM_CACHE_REQ, message);
}

开发者ID:stephen-kun，项目名称:koovox_adk4.0，代码行数:7，代码来源:dm_baseband_cache.c

示例10: ConnectionSmRegisterIncomingService

void ConnectionSmRegisterIncomingService(dm_protocol_id protocol_id, uint32 channel, dm_security_in security)
{
    /* Check params are within allowed values - debug build only */
#ifdef CONNECTION_DEBUG_LIB
    if ((protocol_id != protocol_l2cap) && (protocol_id != protocol_rfcomm))
    {
        CL_DEBUG(("Out of range protocol id 0x%x\n", protocol_id));
    }

    if((protocol_id == protocol_rfcomm) && ((channel < RFCOMM_SERVER_CHANNEL_MIN) || (channel > RFCOMM_SERVER_CHANNEL_MAX)))
    {
        CL_DEBUG(("Out of range RFCOMM server channel 0x%lx\n", channel));
    }

    /* Are any bits other then valid dm_security_in bits are set. */
    if (security & ~sec_in_bitmask)
    {
        CL_DEBUG(("Invalid dm_security_in bits set 0x%x\n", (security & ~sec_in_bitmask)));
    }
    
#endif

    {
    MAKE_CL_MESSAGE(CL_INTERNAL_SM_REGISTER_REQ);
    message->protocol_id = protocol_id;
    message->channel = channel;
    message->outgoing_ok = FALSE;   
    message->security_level = security;
    message->psm = 0;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_SM_REGISTER_REQ, message);
    }
}

开发者ID:stephen-kun，项目名称:csr8670，代码行数:32，代码来源:dm_security_service.c

示例11: ConnectionSyncRegister

void ConnectionSyncRegister(Task theAppTask)
{
	/* Send an internal register request message */
	MAKE_CL_MESSAGE(CL_INTERNAL_SYNC_REGISTER_REQ);
	message->theAppTask = theAppTask;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_SYNC_REGISTER_REQ, message);
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:7，代码来源:dm_sync.c

示例12: ConnectionReadRemoteSuppFeatures

void ConnectionReadRemoteSuppFeatures(Task theAppTask, Sink sink)
{
	/* All requests are sent through the internal state handler */    
	MAKE_CL_MESSAGE(CL_INTERNAL_DM_READ_REMOTE_SUPP_FEAT_REQ);
	message->theAppTask = theAppTask;
	message->sink = sink;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_DM_READ_REMOTE_SUPP_FEAT_REQ, message);
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:8，代码来源:dm_info_supp_features.c

示例13: ConnectionReadRemoteVersion

void ConnectionReadRemoteVersion(Task theAppTask, Sink sink)
{
    /* All requests are sent through the internal state handler */
    MAKE_CL_MESSAGE(CL_INTERNAL_DM_READ_REMOTE_VERSION_REQ);
    message->theAppTask = theAppTask;
    message->sink = sink;
    MessageSendConditionallyOnTask(connectionGetCmTask(), CL_INTERNAL_DM_READ_REMOTE_VERSION_REQ, message, &theCm.infoState.stateInfoLock);
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:8，代码来源:dm_info_remote_version.c

示例14: ConnectionL2capDisconnectResponse

void ConnectionL2capDisconnectResponse(uint8 identifier, Sink sink)
{
	/* Send an internal message */
	MAKE_CL_MESSAGE(CL_INTERNAL_L2CAP_DISCONNECT_RSP);
    message->identifier = identifier;
	message->sink = sink;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_L2CAP_DISCONNECT_RSP, message);
}

开发者ID:stephen-kun，项目名称:csr8670，代码行数:8，代码来源:l2cap.c

示例15: ConnectionL2capUnregisterRequest

void ConnectionL2capUnregisterRequest(Task appTask, uint16 psm)
{
    /* Send an internal message */
    MAKE_CL_MESSAGE(CL_INTERNAL_L2CAP_UNREGISTER_REQ);
    message->theAppTask = appTask;
    message->app_psm = psm;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_L2CAP_UNREGISTER_REQ, message);
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:8，代码来源:ConnectionL2capUnregisterRequest.c

示例16: ConnectionL2capDisconnectRequest

void ConnectionL2capDisconnectRequest(Task appTask, Sink sink)
{
	/* Send an internal message */
	MAKE_CL_MESSAGE(CL_INTERNAL_L2CAP_DISCONNECT_REQ);
	message->theAppTask = appTask;	
	message->sink = sink;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_L2CAP_DISCONNECT_REQ, message);
}

开发者ID:stephen-kun，项目名称:csr8670，代码行数:8，代码来源:l2cap.c

示例17: ConnectionSetLinkPolicy

void ConnectionSetLinkPolicy(Sink sink, uint16 size_power_table, lp_power_table const *power_table)
{
    MAKE_CL_MESSAGE(CL_INTERNAL_DM_SET_LINK_POLICY_REQ);
    message->sink = sink;
    message->size_power_table = size_power_table;
    message->power_table = power_table;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_DM_SET_LINK_POLICY_REQ, message);
}

开发者ID:stephen-kun，项目名称:csr8670，代码行数:8，代码来源:dm_link_policy.c

示例18: ConnectionSmSetTrustLevel

void ConnectionSmSetTrustLevel(const bdaddr* bd_addr, uint16 trusted)
{
    /* Update the Trusted Device List */
    MAKE_CL_MESSAGE(CL_INTERNAL_SM_SET_TRUST_LEVEL_REQ)
	message->bd_addr = *bd_addr;
	message->trusted = trusted;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_SM_SET_TRUST_LEVEL_REQ, message);
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:8，代码来源:ConnectionSmSetTrustLevel.c

示例19: ConnectionUnregisterServiceRecord

void ConnectionUnregisterServiceRecord(Task appTask, uint32 service_record_hdl)
{
	/* Create an internal message and send it to the state machine */
	MAKE_CL_MESSAGE(CL_INTERNAL_SDP_UNREGISTER_RECORD_REQ);
	message->theAppTask = appTask;
	message->service_handle = service_record_hdl;
	MessageSend(connectionGetCmTask(), CL_INTERNAL_SDP_UNREGISTER_RECORD_REQ, message);
}

开发者ID:stephen-kun，项目名称:koovox_adk4.0，代码行数:8，代码来源:sdp_register.c

示例20: ConnectionWriteCachedClockOffset

void ConnectionWriteCachedClockOffset(const bdaddr *addr, uint16 clk_offset)
{
    /* Send an internal message requesting this action */
    MAKE_CL_MESSAGE(CL_INTERNAL_DM_WRITE_CACHED_CLK_OFFSET_REQ);
    message->bd_addr = *addr;
    message->clock_offset = clk_offset;
    MessageSend(connectionGetCmTask(), CL_INTERNAL_DM_WRITE_CACHED_CLK_OFFSET_REQ, message);
}

开发者ID:stephen-kun，项目名称:csr8670，代码行数:8，代码来源:dm_baseband_cache.c

注：本文中的MAKE_CL_MESSAGE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MAKE_HRESULT函数代码示例发布时间：2022-05-30

C++ MAKE_CLASS函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19240|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10001|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8647|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9672|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8668|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ MAKE_CL_MESSAGE函数代码示例

示例1: connectionHandleReadRemoteSupportedFeaturesRequest

示例2: connectionHandleDmHciModeChangeEvent

示例3: ConnectionReadClassOfDevice

示例4: ConnectionSmSendKeypressNotificationRequest

示例5: ConnectionWriteClassOfDevice

示例6: ConnectionSmUnRegisterOutgoingService

示例7: ConnectionRfcommDeallocateChannel

示例8: ConnectionRfcommDisconnectResponse

示例9: ConnectionClearParameterCache

示例10: ConnectionSmRegisterIncomingService

示例11: ConnectionSyncRegister

示例12: ConnectionReadRemoteSuppFeatures

示例13: ConnectionReadRemoteVersion

示例14: ConnectionL2capDisconnectResponse

示例15: ConnectionL2capUnregisterRequest

示例16: ConnectionL2capDisconnectRequest

示例17: ConnectionSetLinkPolicy

示例18: ConnectionSmSetTrustLevel

示例19: ConnectionUnregisterServiceRecord

示例20: ConnectionWriteCachedClockOffset

请发表评论

全部评论

上一篇：

下一篇：

revolunet/angular-carousel: Mobile frien

dphi-official/Machine_Learning_Bootcamp

juven/maven-bash-completion: Maven Bash

adrielcafe/AndroidAudioRecorder: A fancy

route101/mastoinker: Quick image view as

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053