• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ MAC_COPY函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MAC_COPY函数的典型用法代码示例。如果您正苦于以下问题:C++ MAC_COPY函数的具体用法?C++ MAC_COPY怎么用?C++ MAC_COPY使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MAC_COPY函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: buildNullTemplate

/************************************************************************
 *                        buildNullTemplate								*
 ************************************************************************
DESCRIPTION: This function build a NULL data template to set to the HAL 
				when joining an infrastructure network
				performs the following:
				-	Build a template & set the template len, the template type is set in the site mgr
                                                                                                   
INPUT:      pSiteMgr	-	Handle to site manager	
			pTemplate	-	Pointer to the template structure		

OUTPUT:		

RETURN:     TI_OK

************************************************************************/
TI_STATUS buildNullTemplate(siteMgr_t * pSiteMgr, TSetTemplate * pTemplate)
{
	paramInfo_t param;
	nullDataTemplate_t *pBuffer = (nullDataTemplate_t *) pTemplate->ptr;
	siteEntry_t *pPrimarySite = pSiteMgr->pSitesMgmtParams->pPrimarySite;
	TI_UINT16 fc;

	os_memoryZero(pSiteMgr->hOs, pBuffer, sizeof(nullDataTemplate_t));

	/*
	 * Header First
	 */
	/* Set destination address */
	MAC_COPY(pBuffer->hdr.DA, pPrimarySite->bssid);

	/* Set BSSID address */
	MAC_COPY(pBuffer->hdr.BSSID, pPrimarySite->bssid);

	/* Build Source address */
	param.paramType = CTRL_DATA_MAC_ADDRESS;
	ctrlData_getParam(pSiteMgr->hCtrlData, &param);
	MAC_COPY(pBuffer->hdr.SA, param.content.ctrlDataDeviceMacAddress);

	fc = DOT11_FC_DATA_NULL_FUNCTION;
	fc |= (TI_TRUE << DOT11_FC_TO_DS_SHIFT);

	COPY_WLAN_WORD(&pBuffer->hdr.fc, &fc);	/* copy with endianess handling. */

	pTemplate->len = sizeof(dot11_mgmtHeader_t);
	return TI_OK;
}
开发者ID:blueskycoco,项目名称:wang-linux,代码行数:47,代码来源:templates.c


示例2: keyParserExternal_remove

TI_STATUS keyParserExternal_remove(struct _keyParser_t *pKeyParser, TI_UINT8 *pKeyData, TI_UINT32 keyDataLen)
{
	TI_STATUS				status;
	OS_802_11_KEY	 		*pKeyDesc;
    paramInfo_t  			macParam;
	encodedKeyMaterial_t    encodedKeyMaterial;
	TI_UINT8				broadcastMacAddr[MAC_ADDR_LEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
    TI_UINT8                keyBuffer[MAC_ADDR_LEN+KEY_RSC_LEN+MAX_EXT_KEY_DATA_LENGTH];

	if (pKeyData == NULL)
	{
		return TI_NOK;
	}
	
	pKeyDesc = (OS_802_11_KEY*)pKeyData;

    if (pKeyDesc->KeyIndex & EXT_KEY_TRANSMIT_MASK)
	{	/* Bit 31 should always be zero */
		return TI_NOK;
	}
	if (pKeyDesc->KeyIndex & EXT_KEY_REMAIN_BITS_MASK)
	{	/* Bits 8-29 should always be zero */
		return TI_NOK;
	}
	
	encodedKeyMaterial.keyId = pKeyDesc->KeyIndex;
	encodedKeyMaterial.keyLen = 0;
    encodedKeyMaterial.pData = (char *) keyBuffer;

	if (pKeyDesc->KeyIndex & EXT_KEY_PAIRWISE_GROUP_MASK)
	{	/* delete all pairwise keys or for the current BSSID */
		if (!MAC_EQUAL(pKeyDesc->BSSID, broadcastMacAddr))
		{
			MAC_COPY (keyBuffer, pKeyDesc->BSSID);
		} 
        else 
        {
			macParam.paramType = CTRL_DATA_CURRENT_BSSID_PARAM;
			status = ctrlData_getParam(pKeyParser->hCtrlData, &macParam);
			if (status != TI_OK)
			{
				return TI_NOK;
			}
			
			MAC_COPY (keyBuffer, macParam.content.ctrlDataCurrentBSSID);
		}

        status =  pKeyParser->pUcastKey->pKeyDerive->remove(pKeyParser->pUcastKey->pKeyDerive, &encodedKeyMaterial);
	}
	else
	{	/* delete all group keys or for the current BSSID */
		MAC_COPY (keyBuffer, broadcastMacAddr);
        status =  pKeyParser->pBcastKey->pKeyDerive->remove(pKeyParser->pUcastKey->pKeyDerive, &encodedKeyMaterial);
	}

	return status;
}
开发者ID:bluewater-cn,项目名称:ti_wilink,代码行数:57,代码来源:keyParserExternal.c


示例3: buildPsPollTemplate

/************************************************************************
 *                        buildPsPollTemplate							*
 ************************************************************************
DESCRIPTION: This function build a ps poll template
				performs the following:
				-	Build a template & set the template len, the template type is set in the site mgr
                                                                                                   
INPUT:      pSiteMgr	-	Handle to site manager	
			pTemplate	-	Pointer to the template structure		
			pSsid		-	Desired SSID

OUTPUT:		

RETURN:     TI_OK
************************************************************************/
TI_STATUS buildPsPollTemplate(siteMgr_t * pSiteMgr, TSetTemplate * pTemplate)
{
	paramInfo_t param;
	TTwdParamInfo tTwdParam;
	TI_UINT32 size;
	psPollTemplate_t *pBuffer = (psPollTemplate_t *) pTemplate->ptr;
	siteEntry_t *pPrimarySite = pSiteMgr->pSitesMgmtParams->pPrimarySite;
	TI_UINT16 fc;

	os_memoryZero(pSiteMgr->hOs, pBuffer, sizeof(psPollTemplate_t));

	/*
	 * Header First
	 */

	/* Set BSSID address */
	MAC_COPY(pBuffer->hdr.BSSID, pPrimarySite->bssid);

	/* Build Source address */
	param.paramType = CTRL_DATA_MAC_ADDRESS;
	ctrlData_getParam(pSiteMgr->hCtrlData, &param);
	MAC_COPY(pBuffer->hdr.TA, param.content.ctrlDataDeviceMacAddress);

	/*
	 **   Building the Frame Control word (16 bits)
	 ** ---------------------------------------------
	 ** Type = Control
	 ** SubType = Power Save (PS) POLL,  */
	fc = DOT11_FC_PS_POLL;
	/*
	 ** setting the Power Management bit in the Frame control field
	 ** to be "Power Save mode"
	 */
	fc |= (0x1 << DOT11_FC_PWR_MGMT_SHIFT);

	COPY_WLAN_WORD(&pBuffer->hdr.fc, &fc);	/* copy with endianess handling. */

	/*
	 **   Association ID
	 ** -----------------
	 */
	tTwdParam.paramType = TWD_AID_PARAM_ID;
	TWD_GetParam(pSiteMgr->hTWD, &tTwdParam);

	/* AID should have its two MSB bit Set to "1" */
	pBuffer->hdr.AID = tTwdParam.content.halCtrlAid | 0xC000;

	size = sizeof(dot11_PsPollFrameHeader_t);

	pTemplate->len = size;

	return TI_OK;
}
开发者ID:blueskycoco,项目名称:wang-linux,代码行数:68,代码来源:templates.c


示例4: sendDataPacket

void sendDataPacket (TI_HANDLE hOs)
{
    TI_UINT32       i;
	TTxCtrlBlk *    pPktCtrlBlk;
    TI_UINT8 *      pPktBuf;
    TEthernetHeader tEthHeader;
	char SrcBssid[6] = {0x88,0x88,0x88,0x88,0x88,0x88};
	char DesBssid[6] = {0x22,0x22,0x22,0x22,0x22,0x22};

	/* Allocate a TxCtrlBlk for the Tx packet and save timestamp, length and packet handle */
    pPktCtrlBlk = TWD_txCtrlBlk_Alloc (tmp_hTWD);

	if( NULL == pPktCtrlBlk )
	{
        os_printf("\n sendDataPacket() : pPktCtrlBlk returned as NULL from TWD_txCtrlBlk_Alloc() ");
        return;
	}

    pPktCtrlBlk->tTxDescriptor.startTime = os_timeStampMs (hOs);
    pPktCtrlBlk->tTxDescriptor.length    = (TI_UINT16)packetLength + ETHERNET_HDR_LEN;
    pPktCtrlBlk->tTxDescriptor.tid       = 0;
    pPktCtrlBlk->tTxPktParams.uPktType   = TX_PKT_TYPE_ETHER;

    /* Allocate buffer with headroom for getting the IP header in a 4-byte aligned address */
    pPktBuf = txCtrl_AllocPacketBuffer (tmp_hTxCtrl, pPktCtrlBlk, packetLength + ETHERNET_HDR_LEN + 2);

    /* Prepare Ethernet header */
    tEthHeader.type = HTOWLANS(ETHERTYPE_IP);
    MAC_COPY (tEthHeader.src, SrcBssid);
    MAC_COPY (tEthHeader.dst, DesBssid);

	if( pPktBuf )
	{
	    os_memoryCopy (hOs, pPktBuf + 2, &tEthHeader, ETHERNET_HDR_LEN);

        /* Build BDL */
        BUILD_TX_TWO_BUF_PKT_BDL (pPktCtrlBlk,
                                  pPktBuf + 2,
                                  ETHERNET_HDR_LEN,
                                  pPktBuf + 2 + ETHERNET_HDR_LEN,
                                  packetLength)

        /* Fill data buffer with incremented numbers */
        for (i = 0; i < packetLength; i++)
        {
            *(pPktBuf + 2 + ETHERNET_HDR_LEN + i) = i;
        }
	}
	else
	{
开发者ID:chambejp,项目名称:hardware,代码行数:50,代码来源:fwdriverdebug.c


示例5: keyDeriveTkip_derive

TI_STATUS keyDeriveTkip_derive(struct _keyDerive_t * pKeyDerive,
			       encodedKeyMaterial_t * pEncodedKey)
{
	TI_STATUS status;
	TSecurityKeys key;
	keyMaterialTkip_t *keyMaterialTkip;

	if (pEncodedKey == NULL) {
		return TI_NOK;
	}

	key.keyType = KEY_TKIP;
	key.keyIndex = (TI_UINT8) pEncodedKey->keyId;
	key.encLen = KEY_DERIVE_TKIP_ENC_LEN;

	/* Note: Reduce 2 bytes from the size of keyMaterialTkip_t in the following check, 
	   because it is added as padding at the end due to the OS_PACKED removal. */
	if (pEncodedKey->keyLen < (sizeof(keyMaterialTkip_t) - 2)) {
		TRACE1(pKeyDerive->hReport, REPORT_SEVERITY_ERROR,
		       "KEY_DERIVE_TKIP: ERROR: wrong key length %d !!!\n",
		       pEncodedKey->keyLen);
		return TI_NOK;
	}

	keyMaterialTkip = (keyMaterialTkip_t *) pEncodedKey->pData;
	/* Copy encryption key */
	os_memoryCopy(pKeyDerive->hOs, (void *)key.encKey,
		      (void *)keyMaterialTkip->encKey, KEY_DERIVE_TKIP_ENC_LEN);
	if (pEncodedKey->keyId & 0x10000000) {	/* Copy MIC RX */
		os_memoryCopy(pKeyDerive->hOs, (void *)key.micTxKey,
			      (void *)keyMaterialTkip->micRxKey,
			      KEY_DERIVE_TKIP_MIC_LEN);
		/* Copy MIC RX */
		os_memoryCopy(pKeyDerive->hOs, (void *)key.micRxKey,
			      (void *)keyMaterialTkip->micTxKey,
			      KEY_DERIVE_TKIP_MIC_LEN);
	} else {		/* Copy MIC RX */
		os_memoryCopy(pKeyDerive->hOs, (void *)key.micRxKey,
			      (void *)keyMaterialTkip->micRxKey,
			      KEY_DERIVE_TKIP_MIC_LEN);
		/* Copy MIC RX */
		os_memoryCopy(pKeyDerive->hOs, (void *)key.micTxKey,
			      (void *)keyMaterialTkip->micTxKey,
			      KEY_DERIVE_TKIP_MIC_LEN);
	}

	/* Copy MAC address key */
	MAC_COPY(key.macAddress, keyMaterialTkip->macAddress);
	/* Copy RSC */
	os_memoryCopy(pKeyDerive->hOs, (void *)key.keyRsc,
		      (void *)keyMaterialTkip->keyRSC, KEY_RSC_LEN);

	status = pKeyDerive->pMainKeys->setKey(pKeyDerive->pMainKeys, &key);
	if (status == TI_OK) {
		os_memoryCopy(pKeyDerive->hOs, &pKeyDerive->key, pEncodedKey,
			      sizeof(encodedKeyMaterial_t));
	}

	return status;
}
开发者ID:blueskycoco,项目名称:wang-linux,代码行数:60,代码来源:keyDeriveTkip.c


示例6: mainKeys_smTimeOut

/**
*
* mainKeySmLogMessage
*
* \b Description:
*
* Prints Log messge.\n
* Start session timer.
*
* \b ARGS:
*
*  I   - pData - station control block  \n
*
* \b RETURNS:
*
*  TI_OK on success, TI_NOK otherwise.
*/
TI_STATUS mainKeys_smTimeOut(void* data)
{
	OS_802_11_AUTHENTICATION_REQUEST   *request;
	TI_UINT8                   AuthBuf[sizeof(TI_UINT32) + sizeof(OS_802_11_AUTHENTICATION_REQUEST)];
	paramInfo_t				param;
	TI_STATUS				status;
	struct _mainKeys_t 		*pMainKeys = (struct _mainKeys_t *)data;


TRACE1(pMainKeys->hReport, REPORT_SEVERITY_INFORMATION, "MAIN_KEY_SM: TRAP: Session Timeout for station , mainKeysTimeoutCounter=%d\n", pMainKeys->mainKeysTimeoutCounter);

	request = (OS_802_11_AUTHENTICATION_REQUEST *)(AuthBuf + sizeof(TI_UINT32));
	request->Length = sizeof(OS_802_11_AUTHENTICATION_REQUEST);

	param.paramType = CTRL_DATA_CURRENT_BSSID_PARAM;
	status = ctrlData_getParam(pMainKeys->hCtrlData, &param);
	if (status != TI_OK)
	{
		return TI_NOK;
	}

    TRACE1(pMainKeys->hReport, REPORT_SEVERITY_INFORMATION, "current station is banned from the roaming candidates list for %d Ms\n", RSN_MAIN_KEYS_SESSION_TIMEOUT);

    rsn_banSite(pMainKeys->hRsn, param.content.ctrlDataCurrentBSSID, RSN_SITE_BAN_LEVEL_FULL, RSN_MAIN_KEYS_SESSION_TIMEOUT);


	/* mainKeysTimeoutCounter is a boolean variable, With states:	*/
	/* TI_TRUE - It is a Timeout Association Event						*/
	/* TI_FALSE - It is a Media specific Event							*/

	if (!pMainKeys->mainKeysTimeoutCounter)
	{
		/* Fill Media specific indication fields and send to OS/User    */
		MAC_COPY (request->BSSID, param.content.ctrlDataCurrentBSSID);

		request->Flags = OS_802_11_REQUEST_REAUTH;

		*(TI_UINT32*)AuthBuf = os802_11StatusType_Authentication;

TRACE1(pMainKeys->hReport, REPORT_SEVERITY_INFORMATION, " %d Ms\n",RSN_MAIN_KEYS_SESSION_TIMEOUT);

		EvHandlerSendEvent(pMainKeys->hEvHandler, IPC_EVENT_MEDIA_SPECIFIC, (TI_UINT8*)AuthBuf,
							sizeof(TI_UINT32) + sizeof(OS_802_11_AUTHENTICATION_REQUEST));

        tmr_StartTimer (pMainKeys->hSessionTimer,
                        mainKeys_sessionTimeout,
                        (TI_HANDLE)pMainKeys,
                        pMainKeys->keysTimeout,
                        TI_FALSE);

		pMainKeys->mainKeysTimeoutCounter = TI_TRUE;
	}
	else
	{
        pMainKeys->mainKeysTimeoutCounter = TI_FALSE;
        rsn_reportAuthFailure(pMainKeys->hRsn, RSN_AUTH_STATUS_TIMEOUT);
        conn_reportRsnStatus(pMainKeys->hConn, (mgmtStatus_e)STATUS_SECURITY_FAILURE);
	}
	return TI_OK;
}
开发者ID:aleho,项目名称:ti_wilink,代码行数:77,代码来源:mainKeysSm.c


示例7: cmdBld_CfgGroupAddressTable

/****************************************************************************
 *                      cmdBld_CfgGroupAddressTable()
 ****************************************************************************
 * DESCRIPTION: Sets the Group table according to the given configuration.
 *
 * OUTPUT:  None
 *
 * RETURNS: TI_OK or TI_NOK
 ****************************************************************************/
TI_STATUS cmdBld_CfgGroupAddressTable (TI_HANDLE        hCmdBld,
                                       TI_UINT8         uNumGroupAddr,
                                       TMacAddr         *pGroupAddr,
                                       TI_BOOL          bEnabled,
                                       void             *fCb,
                                       TI_HANDLE        hCb)
{
	TCmdBld *pCmdBld = (TCmdBld *)hCmdBld;
	TI_UINT32    i;

	if (uNumGroupAddr > MAX_MULTICAST_GROUP_ADDRS) {
		TRACE1(pCmdBld->hReport, REPORT_SEVERITY_ERROR, "cmdBld_CfgGroupAddressTable: numGroupAddrs=%d\n", uNumGroupAddr);
		return PARAM_VALUE_NOT_VALID;
	}

	if (NULL == pGroupAddr) {
		TRACE2(pCmdBld->hReport, REPORT_SEVERITY_ERROR, "cmdBld_CfgGroupAddressTable: numGroupAddrs=%d Group_addr=0x%x  !!!\n", uNumGroupAddr, pGroupAddr);
		return PARAM_VALUE_NOT_VALID;
	}

	/* Keeps the parameters in the db */
	DB_WLAN(hCmdBld).numGroupAddrs = uNumGroupAddr;
	DB_WLAN(hCmdBld).isMacAddrFilteringnabled = bEnabled;

	for (i = 0; i < uNumGroupAddr; i++) {
		MAC_COPY (DB_WLAN(hCmdBld).aGroupAddr[i], *(pGroupAddr + i));
	}

	return cmdBld_CfgIeGroupAdressTable (hCmdBld, uNumGroupAddr, pGroupAddr, bEnabled, fCb, hCb);
}
开发者ID:Achotjan,项目名称:FreeXperia,代码行数:39,代码来源:CmdBldCfg.c


示例8: cmdBld_CfgSetFwHtCapabilities

/**
 * \fn     cmdBld_CfgSetFwHtCapabilities
 * \brief  set the current AP HT Capabilities to the FW.
 *
 * \note
 * \return TI_OK on success or TI_NOK on failure
 * \sa
 */
TI_STATUS cmdBld_CfgSetFwHtCapabilities (TI_HANDLE hCmdBld,
        TI_UINT32 uHtCapabilites,
        TMacAddr  tMacAddress,
        TI_UINT8  uAmpduMaxLeng,
        TI_UINT8  uAmpduMinSpac,
        void      *fCb,
        TI_HANDLE hCb)
{

	CMD_BLD_MARK_INIT_SEQUENCE_CMD_AS_VALID(hCmdBld, __CFG_HT_CAPABILITIES)

	DB_BSS(hCmdBld).bHtCap = TI_TRUE;
	DB_BSS(hCmdBld).uHtCapabilites = uHtCapabilites;
	MAC_COPY ((DB_BSS(hCmdBld).tMacAddress), tMacAddress);
	DB_BSS(hCmdBld).uAmpduMaxLeng = uAmpduMaxLeng;
	DB_BSS(hCmdBld).uAmpduMinSpac = uAmpduMinSpac;

	return cmdBld_CfgIeSetFwHtCapabilities (hCmdBld,
	                                        uHtCapabilites,
	                                        tMacAddress,
	                                        uAmpduMaxLeng,
	                                        uAmpduMinSpac,
	                                        fCb,
	                                        hCb);
}
开发者ID:Achotjan,项目名称:FreeXperia,代码行数:33,代码来源:CmdBldCfg.c


示例9: buildQosNullDataTemplate

/************************************************************************
 *                        buildQosNullDataTemplate							*
 ************************************************************************
DESCRIPTION: This function build a qos null data template
				performs the following:
				-	Build a template & set the template len, the template type is set in the site mgr
                                                                                                   
INPUT:      pSiteMgr	-	Handle to site manager	
			pTemplate	-	Pointer to the template structure		
			pSsid		-	Desired SSID

OUTPUT:		

RETURN:     TI_OK
************************************************************************/
TI_STATUS buildQosNullDataTemplate(siteMgr_t * pSiteMgr,
				   TSetTemplate * pTemplate,
				   TI_UINT8 userPriority)
{
	paramInfo_t param;
	TI_UINT32 size;
	QosNullDataTemplate_t *pBuffer =
	    (QosNullDataTemplate_t *) pTemplate->ptr;
	siteEntry_t *pPrimarySite = pSiteMgr->pSitesMgmtParams->pPrimarySite;
	TI_UINT16 fc;
	TI_UINT16 qosControl;

	os_memoryZero(pSiteMgr->hOs, pBuffer, sizeof(QosNullDataTemplate_t));

	/*
	 * Header First
	 */
	/* Set destination address */
	if (pPrimarySite) {
		MAC_COPY(pBuffer->hdr.address1, pPrimarySite->bssid);

		/* Set BSSID address */
		MAC_COPY(pBuffer->hdr.address3, pPrimarySite->bssid);
	} else {
		TRACE0(pSiteMgr->hReport, REPORT_SEVERITY_INFORMATION,
		       "No Primary site so cannot fill QosNullData template\n");
	}

	/* Build Source address */
	param.paramType = CTRL_DATA_MAC_ADDRESS;
	ctrlData_getParam(pSiteMgr->hCtrlData, &param);
	MAC_COPY(pBuffer->hdr.address2, param.content.ctrlDataDeviceMacAddress);

	fc = DOT11_FC_DATA_NULL_QOS | (1 << DOT11_FC_TO_DS_SHIFT);
	COPY_WLAN_WORD(&pBuffer->hdr.fc, &fc);	/* copy with endianess handling. */

	qosControl = (TI_UINT16) userPriority;
	qosControl <<= QOS_CONTROL_UP_SHIFT;
	COPY_WLAN_WORD(&pBuffer->hdr.qosControl, &qosControl);	/* copy with endianess handling. */

	size = WLAN_QOS_HDR_LEN;

	pTemplate->len = size;

	return TI_OK;
}
开发者ID:blueskycoco,项目名称:wang-linux,代码行数:61,代码来源:templates.c


示例10: cmdBld_CmdIeSetKey

/****************************************************************************
 *                      cmdBld_CmdIeSetKey()
 ****************************************************************************
 * DESCRIPTION: Construct the SetKey command fileds and send it to the mailbox
 * 
 * INPUTS: 
 *      Action      - add/remove key
 *      MacAddr     - relevant only for mapping keys
 *      KeySize     - key size
 *      KeyType     - default/mapping/TKIP
 *      KeyId       - relevant only for default keys
 *      Key         - key data
 * 
 * OUTPUT:  None
 * 
 * RETURNS: TI_OK or TI_NOK
 ****************************************************************************/
TI_STATUS cmdBld_CmdIeSetKey (TI_HANDLE hCmdBld, 
                              TI_UINT32 action, 
                              TI_UINT8  *pMacAddr, 
                              TI_UINT32 uKeySize, 
                              TI_UINT32 uKeyType, 
                              TI_UINT32 uKeyId, 
                              TI_UINT8  *pKey, 
                              TI_UINT32 uSecuritySeqNumLow, 
                              TI_UINT32 uSecuritySeqNumHigh,
                              void      *fCb, 
                              TI_HANDLE hCb)
{
    TCmdBld *pCmdBld = (TCmdBld *)hCmdBld;
    SetKey_t AcxCmd_SetKey;
    SetKey_t *pCmd = &AcxCmd_SetKey;

    os_memoryZero (pCmdBld->hOs, (void *)pCmd, sizeof(*pCmd));

    MAC_COPY (pCmd->addr, pMacAddr);

    if (uKeySize > MAX_KEY_SIZE)
    {
        os_memoryCopy (pCmdBld->hOs, (void *)pCmd->key, (void *)pKey, MAX_KEY_SIZE);
    }
    else 
    {
        os_memoryCopy (pCmdBld->hOs, (void *)pCmd->key, (void *)pKey, uKeySize);
    }

    pCmd->action = ENDIAN_HANDLE_WORD((TI_UINT16)action);
    pCmd->keySize = (TI_UINT8)uKeySize;
    pCmd->type = (TI_UINT8)uKeyType;
    pCmd->id = (TI_UINT8)uKeyId;
    pCmd->ssidProfile = 0;

    /* 
     * Preserve TKIP/AES security sequence number after recovery.
     * Note that our STA Tx is currently using only one sequence-counter 
     * for all ACs (unlike the Rx which is separated per AC).  
     */
    pCmd->AcSeqNum16[0] = ENDIAN_HANDLE_WORD((TI_UINT16)uSecuritySeqNumLow);
    pCmd->AcSeqNum16[1] = 0;
    pCmd->AcSeqNum16[2] = 0;
    pCmd->AcSeqNum16[3] = 0;
    
    pCmd->AcSeqNum32[0] = ENDIAN_HANDLE_LONG(uSecuritySeqNumHigh);
    pCmd->AcSeqNum32[1] = 0;
    pCmd->AcSeqNum32[2] = 0;
    pCmd->AcSeqNum32[3] = 0;


TRACE6(pCmdBld->hReport, REPORT_SEVERITY_INFORMATION, "Addr: %02x:%02x:%02x:%02x:%02x:%02x\n", pCmd->addr[0],pCmd->addr[1],pCmd->addr[2],pCmd->addr[3],pCmd->addr[4],pCmd->addr[5]);
			
TRACE7(pCmdBld->hReport, REPORT_SEVERITY_INFORMATION, "Action=%x,keySize=0x%x,type=%x, id=%x, ssidProfile=%x, AcSeqNum16[0]=%x, AcSeqNum32[0]=%x\n", pCmd->action,pCmd->keySize, pCmd->type,pCmd->id,pCmd->ssidProfile,pCmd->AcSeqNum16[0],pCmd->AcSeqNum32[0] );

	return cmdQueue_SendCommand (pCmdBld->hCmdQueue, CMD_SET_KEYS, (char *)pCmd, sizeof(*pCmd), fCb, hCb, NULL);
}
开发者ID:aleho,项目名称:ti_wilink,代码行数:74,代码来源:CmdBldCmdIE.c


示例11: sme_SelectRsnMatch

/** 
 * \fn     sme_SelectRsnMatch
 * \brief  Checks if the configured scurity settings match those of a site
 * 
 * Checks if the configured scurity settings match those of a site
 * 
 * \param  hSme - handle to the SME object
 * \param  pCurrentSite - the site to check
 * \return TI_TRUE if site matches RSN settings, TI FALSE if it doesn't
 * \sa     sme_Select
 */ 
TI_BOOL sme_SelectRsnMatch (TI_HANDLE hSme, TSiteEntry *pCurrentSite)
{
    TSme            *pSme = (TSme*)hSme;
	TRsnData    	tRsnData;
    dot11_RSN_t     *pRsnIe;
    TI_UINT8        uRsnIECount=0;
    TI_UINT8        uCurRsnData[255];
    TI_UINT32       uLength = 0;
    TI_UINT32       uMetric;
	TRsnSiteParams  tRsnSiteParams;

	tRsnSiteParams.bssType = pCurrentSite->bssType;
	MAC_COPY(tRsnSiteParams.bssid, pCurrentSite->bssid);
	tRsnSiteParams.pHTCapabilities = &pCurrentSite->tHtCapabilities;
	tRsnSiteParams.pHTInfo = &pCurrentSite->tHtInformation;

    /* copy all RSN IE's */
    pRsnIe = pCurrentSite->pRsnIe;
    while ((uLength < pCurrentSite->rsnIeLen) && (uRsnIECount < MAX_RSN_IE))
    {
        if (uLength + 2 + pRsnIe->hdr[ 1 ] > sizeof (uCurRsnData))
        {
           TRACE4( pSme->hReport, REPORT_SEVERITY_ERROR,
                  "sme_SelectRsnMatch. uRsnIECount=%d, uLength=%d; required copy of %d bytes exceeds the buffer limit %d\n",
                   uRsnIECount, uLength, pRsnIe->hdr[ 1 ] +2, sizeof (uCurRsnData));
           handleRunProblem(PROBLEM_BUF_SIZE_VIOLATION);
           return TI_FALSE;
        }
        uCurRsnData[ 0 + uLength ] = pRsnIe->hdr[ 0 ];
        uCurRsnData[ 1 + uLength ] = pRsnIe->hdr[ 1 ];
        os_memoryCopy (pSme->hOS, &uCurRsnData[ 2 + uLength ], pRsnIe->rsnIeData, pRsnIe->hdr[ 1 ]); 
        uLength += pRsnIe->hdr[ 1 ] + 2;
        pRsnIe += 1;
        uRsnIECount++;
    }
    /* sanity check - make sure RSN IE's size is not too big */
    if (uLength < pCurrentSite->rsnIeLen) 
    {
        TRACE2(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_SelectRsnMatch, RSN IE is too long: rsnIeLen=%d, MAX_RSN_IE=%d\n", pCurrentSite->rsnIeLen, MAX_RSN_IE);
    }

    /* call the RSN to evaluate the site */
    tRsnData.pIe = (pCurrentSite->rsnIeLen == 0) ? NULL : uCurRsnData;
    tRsnData.ieLen = pCurrentSite->rsnIeLen;
    tRsnData.privacy = pCurrentSite->privacy;
    if (rsn_evalSite (pSme->hRsn, &tRsnData, &tRsnSiteParams , &uMetric) != TI_OK)
    {
        /* no match */
        return TI_FALSE;
    }
    else
    {
        /* match! */
        return TI_TRUE;
    }
}
开发者ID:CyanogenDefy,项目名称:android_system_wlan_ti,代码行数:67,代码来源:smeSelect.c


示例12: cmdBld_CmdIeSetKey

/****************************************************************************
 *                      cmdBld_CmdIeSetKey()
 ****************************************************************************
 * DESCRIPTION: Construct the SetKey command fileds and send it to the mailbox
 *
 * INPUTS:
 *      Action      - add/remove key
 *      MacAddr     - relevant only for mapping keys
 *      KeySize     - key size
 *      KeyType     - default/mapping/TKIP
 *      KeyId       - relevant only for default keys
 *      Key         - key data
 *
 * OUTPUT:  None
 *
 * RETURNS: TI_OK or TI_NOK
 ****************************************************************************/
TI_STATUS cmdBld_CmdIeSetKey (TI_HANDLE hCmdBld,
                              TI_UINT32 action,
                              TI_UINT8  *pMacAddr,
                              TI_UINT32 uKeySize,
                              TI_UINT32 uKeyType,
                              TI_UINT32 uKeyId,
                              TI_UINT8  *pKey,
                              TI_UINT32 uSecuritySeqNumLow,
                              TI_UINT32 uSecuritySeqNumHigh,
                              void      *fCb,
                              TI_HANDLE hCb)
{
	TCmdBld *pCmdBld = (TCmdBld *)hCmdBld;
	SetKey_t AcxCmd_SetKey;
	SetKey_t *pCmd = &AcxCmd_SetKey;

	os_memoryZero (pCmdBld->hOs, (void *)pCmd, sizeof(*pCmd));

	MAC_COPY (pCmd->addr, pMacAddr);

	if (uKeySize > MAX_KEY_SIZE) {
		os_memoryCopy (pCmdBld->hOs, (void *)pCmd->key, (void *)pKey, MAX_KEY_SIZE);
	} else {
		os_memoryCopy (pCmdBld->hOs, (void *)pCmd->key, (void *)pKey, uKeySize);
	}

	pCmd->action = ENDIAN_HANDLE_WORD((TI_UINT16)action);
	pCmd->keySize = (TI_UINT8)uKeySize;
	pCmd->type = (TI_UINT8)uKeyType;
	pCmd->id = (TI_UINT8)uKeyId;
	pCmd->ssidProfile = 0;

	/*
	 * Preserve TKIP/AES security sequence number after recovery.
	 * If not in reconfig set to 0 so the FW will ignore it and keep its own number.
	 * Note that our STA Tx is currently using only one sequence-counter
	 * for all ACs (unlike the Rx which is separated per AC).
	 */
	if (pCmdBld->bReconfigInProgress == TI_FALSE) {
		uSecuritySeqNumLow = uSecuritySeqNumHigh = 0;
	}
	pCmd->AcSeqNum16[0] = ENDIAN_HANDLE_WORD((TI_UINT16)uSecuritySeqNumLow);
	pCmd->AcSeqNum16[1] = 0;
	pCmd->AcSeqNum16[2] = 0;
	pCmd->AcSeqNum16[3] = 0;

	pCmd->AcSeqNum32[0] = ENDIAN_HANDLE_LONG(uSecuritySeqNumHigh);
	pCmd->AcSeqNum32[1] = 0;
	pCmd->AcSeqNum32[2] = 0;
	pCmd->AcSeqNum32[3] = 0;


	return cmdQueue_SendCommand (pCmdBld->hCmdQueue, CMD_SET_KEYS, (char *)pCmd, sizeof(*pCmd), fCb, hCb, NULL);
}
开发者ID:IdeosDev,项目名称:vendor_ti_wlan,代码行数:71,代码来源:CmdBldCmdIE.c


示例13: App_DevicesAllocCreate

/*****************************************************************************
 * Function name: App_DevicesAllocCreate
 * Description  : This function creates Enet and IMA devices over the Enet
 *     ports created earlier. Also interworking host device is created for 
 *     the host generation and termination of the packets. 
 * Input  params: None
 * Output params: None
 * Return val   : None
 *****************************************************************************/
void App_DevicesAllocCreate (void)
{
   /* Create device on Enet1 */
   MAC_COPY (device_enet_cfg.mac_addr, wt_mac_enet1);
   h_device_enet1 =
      WP_DeviceCreate (h_port_enet1, WP_PHY (0), WP_DEVICE_ENET,
                       &device_enet_cfg);
   App_TerminateOnError (h_device_enet1, "WP_DeviceCreate() Enet1");
   /* Create device on Enet2 */
   device_enet_cfg.loopbackmode = WP_ENET_NORMAL;  /* no loop back */
   MAC_COPY (device_enet_cfg.mac_addr, wt_mac_enet2);
   h_device_enet2 =
      WP_DeviceCreate (h_port_enet2, WP_PHY (0), WP_DEVICE_ENET,
                       &device_enet_cfg);
   App_TerminateOnError (h_device_enet2, "WP_DeviceCreate() Enet2");

   /* Create an IW Host Device */
   h_dev_iwhost =
      WP_DeviceCreate (h_port_iwhost, 0, WP_DEVICE_IW_HOST, NULL);
   App_TerminateOnError (h_dev_iwhost, "WP_DeviceCreate() IW Host");
}
开发者ID:morrisxd,项目名称:morrix-project-name,代码行数:30,代码来源:atm_ima_ufe.c


示例14: cmdBld_CfgSetBaSession

/**
 * \fn     cmdBld_CfgSetBaInitiator
 * \brief  configure BA session initiator\receiver parameters setting in the FW.
 *
 * \note
 * \return TI_OK on success or TI_NOK on failure
 * \sa
 */
TI_STATUS cmdBld_CfgSetBaSession (TI_HANDLE hCmdBld,
                                  InfoElement_e eBaType,
                                  TI_UINT8 uTid,
                                  TI_UINT8 uState,
                                  TMacAddr tRa,
                                  TI_UINT16 uWinSize,
                                  TI_UINT16 uInactivityTimeout,
                                  void *fCb,
                                  TI_HANDLE hCb)
{
	if (ACX_BA_SESSION_INITIATOR_POLICY == eBaType) {
		DB_BSS(hCmdBld).bBaInitiator[uTid] = TI_TRUE;
		DB_BSS(hCmdBld).tBaSessionInitiatorPolicy[uTid].uTid = uTid;
		DB_BSS(hCmdBld).tBaSessionInitiatorPolicy[uTid].uPolicy = uState;
		MAC_COPY ((DB_BSS(hCmdBld).tBaSessionInitiatorPolicy[uTid].aMacAddress),tRa);
		DB_BSS(hCmdBld).tBaSessionInitiatorPolicy[uTid].uWinSize = uWinSize;
		DB_BSS(hCmdBld).tBaSessionInitiatorPolicy[uTid].uInactivityTimeout = uInactivityTimeout;
	} else {
		DB_BSS(hCmdBld).bBaResponder[uTid] = TI_TRUE;
		DB_BSS(hCmdBld).tBaSessionResponderPolicy[uTid].uTid = uTid;
		DB_BSS(hCmdBld).tBaSessionResponderPolicy[uTid].uPolicy = uState;
		MAC_COPY ((DB_BSS(hCmdBld).tBaSessionResponderPolicy[uTid].aMacAddress),tRa);
		DB_BSS(hCmdBld).tBaSessionResponderPolicy[uTid].uWinSize = uWinSize;
		DB_BSS(hCmdBld).tBaSessionResponderPolicy[uTid].uInactivityTimeout = uInactivityTimeout;
	}

	CMD_BLD_MARK_INIT_SEQUENCE_CMD_AS_VALID(hCmdBld,__CFG_BA_SET_SESSION);

	return cmdBld_CfgIeSetBaSession (hCmdBld,
	                                 eBaType,
	                                 uTid,
	                                 uState,
	                                 tRa,
	                                 uWinSize,
	                                 uInactivityTimeout,
	                                 fCb,
	                                 hCb);
}
开发者ID:Achotjan,项目名称:FreeXperia,代码行数:46,代码来源:CmdBldCfg.c


示例15: buildDisconnTemplate

/************************************************************************
 *                        buildDisconnTemplate								*
 ************************************************************************
DESCRIPTION: This function build a Death/Disassoc template to set to the HAL 
				when joining an infrastructure network
				performs the following:
				-	Build a template & set the template len, the template type is set in the site mgr
                                                                                                   
INPUT:      pSiteMgr	-	Handle to site manager	
			pTemplate	-	Pointer to the template structure		

OUTPUT:		

RETURN:     TI_OK

************************************************************************/
TI_STATUS buildDisconnTemplate(siteMgr_t * pSiteMgr, TSetTemplate * pTemplate)
{
	paramInfo_t param;
	TI_UINT32 size;
	disconnTemplate_t *pBuffer = (disconnTemplate_t *) pTemplate->ptr;
	siteEntry_t *pPrimarySite = pSiteMgr->pSitesMgmtParams->pPrimarySite;
	TI_UINT16 fc;

	os_memoryZero(pSiteMgr->hOs, pBuffer, sizeof(disconnTemplate_t));

	/*
	 * Header First
	 */
	/* Set destination address */
	MAC_COPY(pBuffer->hdr.DA, pPrimarySite->bssid);

	/* Set BSSID address */
	MAC_COPY(pBuffer->hdr.BSSID, pPrimarySite->bssid);

	/* Build Source address */
	param.paramType = CTRL_DATA_MAC_ADDRESS;
	ctrlData_getParam(pSiteMgr->hCtrlData, &param);
	MAC_COPY(pBuffer->hdr.SA, param.content.ctrlDataDeviceMacAddress);

	fc = DOT11_FC_DISASSOC;	/* will be change by firmware to DOT11_FC_DEAUTH if needed */

	COPY_WLAN_WORD(&pBuffer->hdr.fc, &fc);	/* copy with endianess handling. */

	pBuffer->disconnReason = 0;	/* filled by firmware */

	size = sizeof(disconnTemplate_t);

	pTemplate->len = size;

	return TI_OK;
}
开发者ID:blueskycoco,项目名称:wang-linux,代码行数:52,代码来源:templates.c


示例16: handle

/***********************************************************************
 *                        txCtrlServ_buildNullFrame
 ***********************************************************************

DESCRIPTION:    Build Null frame Function.
                The function does the following:
                -   Builds Null Data Frame, considering current QoS mode.

INPUT:      hTxCtrl     - Tx Ctrl module handle (the txServ uses the txCtrl object!!).
            pFrame      - A pointer to a buffer where the frame should be stored
            pLength     - A pointer to a placeholder for the frame length

************************************************************************/
TI_STATUS txCtrlServ_buildNullFrame(TI_HANDLE hTxCtrl, TI_UINT8* pFrame, TI_UINT32* pLength)
{
    txCtrl_t            *pTxCtrl = (txCtrl_t *)hTxCtrl;
    EHeaderConvertMode  qosMode = pTxCtrl->headerConverMode;
    dot11_header_t      *pHeader; /* Note : there is no body for null frame */
    TI_STATUS           status;
    TI_UINT16           fc;

    pHeader = (dot11_header_t*)(pFrame);

    if (qosMode == HDR_CONVERT_QOS)
    {
        *pLength = WLAN_QOS_HDR_LEN;
		SET_WLAN_WORD(&pHeader->qosControl, 0);     /* We are using user priority 0 (BE) so no need for shift and endianess */
    }
    else
    {
        *pLength = WLAN_HDR_LEN;
    }


    /* Set the Frame Control with Null Data type, QoS or non-QoS */
    if (qosMode == HDR_CONVERT_QOS)
        fc = DOT11_FC_DATA_NULL_QOS | DOT11_FC_TO_DS;
    else
        fc = DOT11_FC_DATA_NULL_FUNCTION | DOT11_FC_TO_DS;
    COPY_WLAN_WORD(&pHeader->fc, &fc); /* copy with endianess handling. */

    /* copy destination mac address */
    status = ctrlData_getParamBssid(pTxCtrl->hCtrlData, CTRL_DATA_CURRENT_BSSID_PARAM, pHeader->address3);
    if (status != TI_OK)
    {
        return TI_NOK;
    }

    /* copy source mac address */
    status = ctrlData_getParamBssid(pTxCtrl->hCtrlData, CTRL_DATA_MAC_ADDRESS, pHeader->address2);

    if (status != TI_OK)
    {
        return TI_NOK;
    }

    /* copy BSSID (destination mac address) */
    MAC_COPY (pHeader->address1, pHeader->address3);

    return status;
}
开发者ID:Achotjan,项目名称:FreeXperia,代码行数:61,代码来源:txCtrlServ.c


示例17: keyDeriveAes_derive

TI_STATUS keyDeriveAes_derive(struct _keyDerive_t *pKeyDerive, encodedKeyMaterial_t *pEncodedKey)
{
	TI_STATUS status;
	TSecurityKeys	key;
	keyMaterialAes_t   *keyMaterialAes = NULL;
	
	/* Small verification */
	if ((pEncodedKey==NULL) || (pKeyDerive == NULL))
	{
		return TI_NOK;
	}
	
    /* Note: Reduce 2 bytes from the size of keyMaterialAes_t in the following check, 
	         because it is added as padding at the end due to the OS_PACKED removal. */
    if ( pEncodedKey->keyLen < (sizeof(keyMaterialAes_t) - 2) )
	{
TRACE1(pKeyDerive->hReport, REPORT_SEVERITY_ERROR, "KEY_DERIVE_AES: ERROR: wrong key length %d !!!\n",						pEncodedKey->keyLen);
		return TI_NOK;
	}

	keyMaterialAes = (keyMaterialAes_t*)pEncodedKey->pData;

	
	/* Fill security key structure */
	os_memoryZero(pKeyDerive->hOs, &key, sizeof(TSecurityKeys));

	key.keyType   = KEY_AES;
	key.keyIndex  = (TI_UINT8)pEncodedKey->keyId;
	key.encLen    = DERIVE_AES_KEY_LEN;
	os_memoryCopy(pKeyDerive->hOs, (void *)key.encKey, pEncodedKey->pData + MAC_ADDR_LEN+KEY_RSC_LEN, 
		          DERIVE_AES_KEY_LEN);

	/* Copy MAC address key */
	MAC_COPY (key.macAddress, keyMaterialAes->macAddress);
	/* Copy RSC */
	os_memoryCopy(pKeyDerive->hOs, (void *)key.keyRsc, (void *)keyMaterialAes->keyRSC, KEY_RSC_LEN);

	status = pKeyDerive->pMainKeys->setKey(pKeyDerive->pMainKeys, &key);
	if (status == TI_OK)
	{
		os_memoryCopy(pKeyDerive->hOs, &pKeyDerive->key, pEncodedKey, sizeof(encodedKeyMaterial_t));
	}
	
	return status;
}
开发者ID:Achotjan,项目名称:FreeXperia,代码行数:45,代码来源:keyDeriveAes.c


示例18: txDataQ_LinkMacAdd

/**
 * \fn     txDataQ_LinkMacAdd
 * \brief  Set MAC address for the link id.
 *
  * \return void
 * \sa     txDataQ_LinkMacAdd
 */
TI_STATUS txDataQ_LinkMacAdd (TI_HANDLE hTxDataQ, TI_UINT32 uHlid, TMacAddr tMacAddr)
{
	TTxDataQ *pTxDataQ = (TTxDataQ *)hTxDataQ;

	if (uHlid >= LINK_MAC_TABLE_SIZE) {
		WLAN_OS_REPORT(("%s: illegal uHlid = %d\n", __FUNCTION__, uHlid));
		return TI_NOK;
	}
	/* Enter critical section to protect links data */
	context_EnterCriticalSection (pTxDataQ->hContext);

	pTxDataQ->aLinkMac[uHlid].uValid = TI_TRUE;
	MAC_COPY (pTxDataQ->aLinkMac[uHlid].tMacAddr, tMacAddr);

	context_LeaveCriticalSection (pTxDataQ->hContext);

	return TI_OK;
}
开发者ID:IdeosDev,项目名称:vendor_ti_wlan,代码行数:25,代码来源:txDataQueue.c


示例19: keyDeriveWep_remove

TI_STATUS keyDeriveWep_remove(struct _keyDerive_t *pKeyDerive, encodedKeyMaterial_t *pEncodedKey)
{
	TI_STATUS status;
	TSecurityKeys	key;

	os_memoryZero(pKeyDerive->hOs, &key, sizeof(TSecurityKeys));
	key.keyType = KEY_WEP;
	key.keyIndex = (TI_UINT8)pEncodedKey->keyId;
	key.encLen = (TI_UINT16)pKeyDerive->key.keyLen;
	MAC_COPY (key.macAddress, pEncodedKey->pData);

	status = pKeyDerive->pMainKeys->removeKey(pKeyDerive->pMainKeys, &key);
	if (status == TI_OK) {
		os_memoryZero(pKeyDerive->hOs, &pKeyDerive->key, sizeof(encodedKeyMaterial_t));
	}

	return status;
}
开发者ID:IdeosDev,项目名称:vendor_ti_wlan,代码行数:18,代码来源:keyDeriveWep.c


示例20: keyDeriveAes_remove

TI_STATUS keyDeriveAes_remove(struct _keyDerive_t *pKeyDerive, encodedKeyMaterial_t *pEncodedKey)
{
	TI_STATUS status;
	TSecurityKeys	key;

	if ((pEncodedKey==NULL) || (pKeyDerive == NULL)) {
		return TI_NOK;
	}

	os_memoryZero(pKeyDerive->hOs, &key, sizeof(TSecurityKeys));
	key.keyType  = KEY_AES;
	key.keyIndex = (TI_UINT8)pEncodedKey->keyId;
	key.encLen    = DERIVE_AES_KEY_LEN;
	MAC_COPY (key.macAddress, pEncodedKey->pData);

	status = pKeyDerive->pMainKeys->removeKey(pKeyDerive->pMainKeys, &key);
	if (status == TI_OK) {
		os_memoryZero(pKeyDerive->hOs, &pKeyDerive->key, sizeof(encodedKeyMaterial_t));
	}

	return status;
}
开发者ID:IdeosDev,项目名称:vendor_ti_wlan,代码行数:22,代码来源:keyDeriveAes.c



注:本文中的MAC_COPY函数


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MAC_POLICY_CHECK_NOSLEEP函数代码示例发布时间:2022-05-30
下一篇:
C++ MAC_CHECK_PROBE2函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap