本文整理汇总了C++中MACHP函数的典型用法代码示例。如果您正苦于以下问题:C++ MACHP函数的具体用法?C++ MACHP怎么用?C++ MACHP使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了MACHP函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: pnpprobe
static Ctlr*
pnpprobe(SDev *sd)
{
ulong start;
char *p;
static int i;
if(i > nprobe)
return 0;
p = probef[i++];
if(strlen(p) < 2)
return 0;
if(p[1] == '!')
p += 2;
start = TK2MS(MACHP(0)->ticks);
if(waserror()){
print("#æ: pnpprobe failed in %lud ms: %s: %s\n",
TK2MS(MACHP(0)->ticks) - start, probef[i-1],
up->errstr);
return nil;
}
sd = aoeprobe(p, sd); /* does a round of probing */
poperror();
print("#æ: pnpprobe established %s in %lud ms\n",
probef[i-1], TK2MS(MACHP(0)->ticks) - start);
return sd->ctlr;
}
开发者ID:carriercomm,项目名称:plan9-gpl,代码行数:28,代码来源:sdaoe.c
示例2: procalarm
ulong
procalarm(ulong time)
{
Proc **l, *f;
ulong when, old;
if(up->alarm)
old = tk2ms(up->alarm - MACHP(0)->ticks);
else
old = 0;
if(time == 0) {
up->alarm = 0;
return old;
}
when = ms2tk(time)+MACHP(0)->ticks;
if(when == 0) /* ticks have wrapped to 0? */
when = 1; /* distinguish a wrapped alarm from no alarm */
qlock(&alarms);
l = &alarms.head;
for(f = *l; f; f = f->palarm) {
if(up == f){
*l = f->palarm;
break;
}
l = &f->palarm;
}
up->palarm = 0;
if(alarms.head) {
l = &alarms.head;
for(f = *l; f; f = f->palarm) {
if((long)(f->alarm - when) >= 0) {
up->palarm = f;
*l = up;
goto done;
}
l = &f->palarm;
}
*l = up;
}
else
alarms.head = up;
done:
up->alarm = when;
qunlock(&alarms);
return old;
}
开发者ID:99years,项目名称:plan9,代码行数:49,代码来源:alarm.c
示例3: wifitx
static void
wifitx(Wifi *wifi, Wnode *wn, Block *b)
{
Wifipkt *w;
uint seq;
wn->lastsend = MACHP(0)->ticks;
seq = incref(&wifi->txseq);
seq <<= 4;
w = (Wifipkt*)b->rp;
w->dur[0] = 0;
w->dur[1] = 0;
w->seq[0] = seq;
w->seq[1] = seq>>8;
if((w->fc[0] & 0x0c) != 0x00){
b = wifiencrypt(wifi, wn, b);
if(b == nil)
return;
}
if((wn->txcount++ & 255) == 255){
if(wn->actrate != nil && wn->actrate < wn->maxrate)
wn->actrate++;
}
(*wifi->transmit)(wifi, wn, b);
}
开发者ID:srk-cmu,项目名称:9problems,代码行数:30,代码来源:wifi.c
示例4: alarmkproc
void
alarmkproc(void*)
{
Proc *rp;
ulong now, when;
while(waserror())
;
for(;;){
now = MACHP(0)->ticks;
qlock(&alarms);
for(rp = alarms.head; rp != nil; rp = rp->palarm){
if((when = rp->alarm) == 0)
continue;
if((long)(now - when) < 0)
break;
if(!canqlock(&rp->debug))
break;
if(rp->alarm != 0){
postnote(rp, 0, "alarm", NUser);
rp->alarm = 0;
}
qunlock(&rp->debug);
}
alarms.head = rp;
qunlock(&alarms);
sleep(&alarmr, return0, 0);
}
}
开发者ID:Nurb432,项目名称:plan9front,代码行数:31,代码来源:alarm.c
示例5: todset
/*
* Set the time of day struct
*/
void
todset(vlong t, vlong delta, int n)
{
if(!tod.init)
todinit();
ilock(&tod);
if(t >= 0){
tod.off = t;
tod.last = fastticks(nil);
tod.lasttime = 0;
tod.delta = 0;
tod.sstart = tod.send;
} else {
if(n <= 0)
n = 1;
n *= HZ;
if(delta < 0 && n > -delta)
n = -delta;
if(delta > 0 && n > delta)
n = delta;
if (n == 0) {
iprint("todset: n == 0, delta == %lld\n", delta);
delta = 0;
} else
delta /= n;
tod.sstart = MACHP(0)->ticks;
tod.send = tod.sstart + n;
tod.delta = delta;
}
iunlock(&tod);
}
开发者ID:Nurb432,项目名称:plan9front,代码行数:35,代码来源:tod.c
示例6: alarmkproc
void
alarmkproc(void*)
{
Proc *rp;
ulong now;
for(;;){
now = MACHP(0)->ticks;
qlock(&alarms);
/*
* the odd test of now vs. rp->alarm is to cope with
* now wrapping around.
*/
while((rp = alarms.head) && (long)(now - rp->alarm) >= 0){
if(rp->alarm != 0L){
if(canqlock(&rp->debug)){
if(!waserror()){
postnote(rp, 0, "alarm", NUser);
poperror();
}
qunlock(&rp->debug);
rp->alarm = 0L;
}else
break;
}
alarms.head = rp->palarm;
}
qunlock(&alarms);
sleep(&alarmr, return0, 0);
}
}
开发者ID:99years,项目名称:plan9,代码行数:32,代码来源:alarm.c
示例7: updatecpu
/*
* Update the cpu time average for this particular process,
* which is about to change from up -> not up or vice versa.
* p->lastupdate is the last time an updatecpu happened.
*
* The cpu time average is a decaying average that lasts
* about D clock ticks. D is chosen to be approximately
* the cpu time of a cpu-intensive "quick job". A job has to run
* for approximately D clock ticks before we home in on its
* actual cpu usage. Thus if you manage to get in and get out
* quickly, you won't be penalized during your burst. Once you
* start using your share of the cpu for more than about D
* clock ticks though, your p->cpu hits 1000 (1.0) and you end up
* below all the other quick jobs. Interactive tasks, because
* they basically always use less than their fair share of cpu,
* will be rewarded.
*
* If the process has not been running, then we want to
* apply the filter
*
* cpu = cpu * (D-1)/D
*
* n times, yielding
*
* cpu = cpu * ((D-1)/D)^n
*
* but D is big enough that this is approximately
*
* cpu = cpu * (D-n)/D
*
* so we use that instead.
*
* If the process has been running, we apply the filter to
* 1 - cpu, yielding a similar equation. Note that cpu is
* stored in fixed point (* 1000).
*
* Updatecpu must be called before changing up, in order
* to maintain accurate cpu usage statistics. It can be called
* at any time to bring the stats for a given proc up-to-date.
*/
void
updatecpu(Proc *p)
{
int n, t, ocpu;
int D = schedgain*HZ*Scaling;
if(p->edf != nil)
return;
t = MACHP(0)->ticks*Scaling + Scaling/2;
n = t - p->lastupdate;
p->lastupdate = t;
if(n == 0)
return;
if(n > D)
n = D;
ocpu = p->cpu;
if(p != up)
p->cpu = (ocpu*(D-n))/D;
else{
t = 1000 - ocpu;
t = (t*(D-n))/D;
p->cpu = 1000 - t;
}
//iprint("pid %d %s for %d cpu %d -> %d\n", p->pid,p==up?"active":"inactive",n, ocpu,p->cpu);
}
开发者ID:grobe0ba,项目名称:plan9front,代码行数:69,代码来源:proc.c
示例8: checkalarms
/*
* called every clock tick
*/
void
checkalarms(void)
{
Proc *p;
ulong now;
now = MACHP(0)->ticks;
if(talarm.list == 0 || canlock(&talarm) == 0)
return;
for(;;) {
p = talarm.list;
if(p == 0)
break;
if(p->twhen == 0) {
talarm.list = p->tlink;
p->trend = 0;
continue;
}
if(now < p->twhen)
break;
wakeup(p->trend);
talarm.list = p->tlink;
p->trend = 0;
}
unlock(&talarm);
}
开发者ID:8l,项目名称:inferno,代码行数:33,代码来源:alarm.c
示例9: reprioritize
/*
* On average, p has used p->cpu of a cpu recently.
* Its fair share is conf.nmach/m->load of a cpu. If it has been getting
* too much, penalize it. If it has been getting not enough, reward it.
* I don't think you can get much more than your fair share that
* often, so most of the queues are for using less. Having a priority
* of 3 means you're just right. Having a higher priority (up to p->basepri)
* means you're not using as much as you could.
*/
int
reprioritize(Proc *p)
{
int fairshare, n, load, ratio;
load = MACHP(0)->load;
if(load == 0)
return p->basepri;
/*
* fairshare = 1.000 * conf.nmach * 1.000/load,
* except the decimal point is moved three places
* on both load and fairshare.
*/
fairshare = (conf.nmach*1000*1000)/load;
n = p->cpu;
if(n == 0)
n = 1;
ratio = (fairshare+n/2) / n;
if(ratio > p->basepri)
ratio = p->basepri;
if(ratio < 0)
panic("reprioritize");
//iprint("pid %d cpu %d load %d fair %d pri %d\n", p->pid, p->cpu, load, fairshare, ratio);
return ratio;
}
开发者ID:grobe0ba,项目名称:plan9front,代码行数:35,代码来源:proc.c
示例10: ready
/*
* ready(p) picks a new priority for a process and sticks it in the
* runq for that priority.
*/
void
ready(Proc *p)
{
int s, pri;
Schedq *rq;
void (*pt)(Proc*, int, vlong);
if(p->state == Ready){
print("double ready %s %lud pc %p\n", p->text, p->pid, getcallerpc(&p));
return;
}
s = splhi();
if(edfready(p)){
splx(s);
return;
}
if(up != p && (p->wired == nil || p->wired == MACHP(m->machno)))
m->readied = p; /* group scheduling */
updatecpu(p);
pri = reprioritize(p);
p->priority = pri;
rq = &runq[pri];
p->state = Ready;
queueproc(rq, p);
pt = proctrace;
if(pt != nil)
pt(p, SReady, 0);
splx(s);
}
开发者ID:grobe0ba,项目名称:plan9front,代码行数:36,代码来源:proc.c
示例11: procwired
/*
* wire this proc to a machine
*/
void
procwired(Proc *p, int bm)
{
Proc *pp;
int i;
char nwired[MAXMACH];
Mach *wm;
if(bm < 0){
/* pick a machine to wire to */
memset(nwired, 0, sizeof(nwired));
p->wired = nil;
pp = proctab(0);
for(i=0; i<conf.nproc; i++, pp++){
wm = pp->wired;
if(wm != nil && pp->pid)
nwired[wm->machno]++;
}
bm = 0;
for(i=0; i<conf.nmach; i++)
if(nwired[i] < nwired[bm])
bm = i;
} else {
/* use the virtual machine requested */
bm = bm % conf.nmach;
}
p->wired = MACHP(bm);
p->mp = p->wired;
}
开发者ID:grobe0ba,项目名称:plan9front,代码行数:33,代码来源:proc.c
示例12: rebalance
static void
rebalance(void)
{
int pri, npri, t, x;
Schedq *rq;
Proc *p;
t = m->ticks;
if(t - balancetime < HZ)
return;
balancetime = t;
for(pri=0, rq=runq; pri<Npriq; pri++, rq++){
another:
p = rq->head;
if(p == nil)
continue;
if(p->mp != MACHP(m->machno))
continue;
if(pri == p->basepri)
continue;
updatecpu(p);
npri = reprioritize(p);
if(npri != pri){
x = splhi();
p = dequeueproc(rq, p);
if(p != nil)
queueproc(&runq[npri], p);
splx(x);
goto another;
}
}
}
开发者ID:grobe0ba,项目名称:plan9front,代码行数:33,代码来源:proc.c
示例13: alarmkproc
void
alarmkproc(void*)
{
Proc *rp;
ulong now;
for(;;){
now = MACHP(0)->ticks;
qlock(&alarms);
while((rp = alarms.head) && rp->alarm <= now){
if(rp->alarm != 0L){
if(canqlock(&rp->debug)){
if(!waserror()){
postnote(rp, 0, "alarm", NUser);
poperror();
}
qunlock(&rp->debug);
rp->alarm = 0L;
}else
break;
}
alarms.head = rp->palarm;
}
qunlock(&alarms);
sleep(&alarmr, return0, 0);
}
}
开发者ID:AustenConrad,项目名称:plan-9,代码行数:28,代码来源:alarm.c
示例14: procalarm
ulong
procalarm(ulong time)
{
Proc **l, *f;
ulong when, old;
if(up->alarm)
old = tk2ms(up->alarm - MACHP(0)->ticks);
else
old = 0;
if(time == 0) {
up->alarm = 0;
return old;
}
when = ms2tk(time)+MACHP(0)->ticks;
qlock(&alarms);
l = &alarms.head;
for(f = *l; f; f = f->palarm) {
if(up == f){
*l = f->palarm;
break;
}
l = &f->palarm;
}
up->palarm = 0;
if(alarms.head) {
l = &alarms.head;
for(f = *l; f; f = f->palarm) {
if(f->alarm > when) {
up->palarm = f;
*l = up;
goto done;
}
l = &f->palarm;
}
*l = up;
}
else
alarms.head = up;
done:
up->alarm = when;
qunlock(&alarms);
return old;
}
开发者ID:AustenConrad,项目名称:plan-9,代码行数:47,代码来源:alarm.c
示例15: nrand
int
nrand(int n)
{
if(randn == 0)
seedrand();
randn = randn*1103515245 + 12345 + MACHP(0)->ticks;
return (randn>>16) % n;
}
开发者ID:8l,项目名称:inferno,代码行数:8,代码来源:devcons.c
示例16: txstart
static void
txstart(Ether* ether)
{
int port;
Smc91xx* ctlr;
Block* bp;
int len, npages;
int pno;
/* assumes ctlr is locked and bank 2 is selected */
/* leaves bank 2 selected on return */
port = ether->port;
ctlr = ether->ctlr;
if (ctlr->txbp) {
bp = ctlr->txbp;
ctlr->txbp = 0;
} else {
bp = qget(ether->oq);
if (bp == 0)
return;
len = BLEN(bp);
npages = (len + HdrSize) / PageSize;
outs(port + MmuCmd, McAlloc | npages);
}
pno = inb(port + AllocRes);
if (pno & ArFailed) {
outb(port + IntrMask, inb(port + IntrMask) | IntAlloc);
ctlr->txbp = bp;
ctlr->txtime = MACHP(0)->ticks;
return;
}
outb(port + PktNo, pno);
outs(port + Pointer, PtrAutoInc);
len = BLEN(bp);
outs(port + Data1, 0);
outb(port + Data1, (len + HdrSize) & 0xFF);
outb(port + Data1, (len + HdrSize) >> 8);
outss(port + Data1, bp->rp, len / 2);
if ((len & 1) == 0) {
outs(port + Data1, 0);
} else {
outb(port + Data1, bp->rp[len - 1]);
outb(port + Data1, 0x20); /* no info what 0x20 means */
}
outb(port + IntrMask, inb(port + IntrMask) |
IntTxError | IntTxEmpty);
outs(port + MmuCmd, McEnqueue);
freeb(bp);
}
开发者ID:99years,项目名称:plan9,代码行数:56,代码来源:ethersmc.c
示例17: syncclock
void
syncclock(void)
{
uvlong x;
if(arch->fastclock != tscticks)
return;
if(m->machno == 0){
wrmsr(0x10, 0);
m->tscticks = 0;
} else {
x = MACHP(0)->tscticks;
while(x == MACHP(0)->tscticks)
;
wrmsr(0x10, MACHP(0)->tscticks);
cycles(&m->tscticks);
}
}
开发者ID:8l,项目名称:inferno,代码行数:19,代码来源:archmp.c
示例18: ethercheck
static void
ethercheck(Ether *ether)
{
if (ether->starttime != 0 &&
TK2MS(MACHP(0)->ticks)/1000 - ether->starttime > Etherstuck) {
etheractive(ether);
if (ether->ctlrno == 0) /* only complain about main ether */
iprint("#l%d: ethernet stuck\n", ether->ctlrno);
}
}
开发者ID:CoryXie,项目名称:NxM,代码行数:10,代码来源:ether1116.c
示例19: tsince
static int
tsince(int tag)
{
int n;
n = MACHP(0)->ticks & 0xffff;
n -= tag & 0xffff;
if(n < 0)
n += 1<<16;
return n;
}
开发者ID:Earnestly,项目名称:plan9,代码行数:11,代码来源:devaoe.c
示例20: newtag
static int
newtag(Aoedev *d)
{
int t;
do {
t = ++d->lasttag << 16;
t |= MACHP(0)->ticks & 0xffff;
} while (t == Tfree || t == Tmgmt);
return t;
}
开发者ID:Earnestly,项目名称:plan9,代码行数:11,代码来源:devaoe.c
注:本文中的MACHP函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论