• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ MACB_BIT函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MACB_BIT函数的典型用法代码示例。如果您正苦于以下问题:C++ MACB_BIT函数的具体用法?C++ MACB_BIT怎么用?C++ MACB_BIT使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MACB_BIT函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: macb_mdio_read

static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
{
	unsigned long netctl;
	unsigned long netstat;
	unsigned long frame;

	netctl = macb_readl(macb, NCR);
	netctl |= MACB_BIT(MPE);
	macb_writel(macb, NCR, netctl);

	frame = (MACB_BF(SOF, 1)
		 | MACB_BF(RW, 2)
		 | MACB_BF(PHYA, macb->phy_addr)
		 | MACB_BF(REGA, reg)
		 | MACB_BF(CODE, 2));
	macb_writel(macb, MAN, frame);

	do {
		netstat = macb_readl(macb, NSR);
	} while (!(netstat & MACB_BIT(IDLE)));

	frame = macb_readl(macb, MAN);

	netctl = macb_readl(macb, NCR);
	netctl &= ~MACB_BIT(MPE);
	macb_writel(macb, NCR, netctl);

	return MACB_BFEXT(DATA, frame);
}
开发者ID:RobertCNelson,项目名称:u-boot-boards,代码行数:29,代码来源:macb.c


示例2: macb_phy_write

static int macb_phy_write(struct mii_device *mdev, int addr, int reg, int value)
{
	struct eth_device *edev = mdev->edev;
	struct macb_device *macb = edev->priv;
	unsigned long netctl;
	unsigned long netstat;
	unsigned long frame;

	debug("%s\n", __func__);

	netctl = readl(macb->regs + MACB_NCR);
	netctl |= MACB_BIT(MPE);
	writel(netctl, macb->regs + MACB_NCR);

	frame = (MACB_BF(SOF, 1)
		 | MACB_BF(RW, 1)
		 | MACB_BF(PHYA, addr)
		 | MACB_BF(REGA, reg)
		 | MACB_BF(CODE, 2)
		 | MACB_BF(DATA, value));
	writel(frame, macb->regs + MACB_MAN);

	do {
		netstat = readl(macb->regs + MACB_NSR);
	} while (!(netstat & MACB_BIT(IDLE)));

	netctl = readl(macb->regs + MACB_NCR);
	netctl &= ~MACB_BIT(MPE);
	writel(netctl, macb->regs + MACB_NCR);

	return 0;
}
开发者ID:cpdesign,项目名称:barebox,代码行数:32,代码来源:macb.c


示例3: macb_smi_write

static void macb_smi_write(struct macb_device *macb, u16 phy, u8 reg, u16 value)
{
	unsigned long netctl;
	unsigned long netstat;
	unsigned long frame;

	netctl = macb_readl(macb, NCR);
	netctl |= MACB_BIT(MPE);
	macb_writel(macb, NCR, netctl);

	frame = (MACB_BF(SOF, 1)
		 | MACB_BF(RW, 1)
		 | MACB_BF(PHYA, phy)
		 | MACB_BF(REGA, reg)
		 | MACB_BF(CODE, 2)
		 | MACB_BF(DATA, value));
	macb_writel(macb, MAN, frame);

	do {
		netstat = macb_readl(macb, NSR);
	} while (!(netstat & MACB_BIT(IDLE)));

	netctl = macb_readl(macb, NCR);
	netctl &= ~MACB_BIT(MPE);
	macb_writel(macb, NCR, netctl);
}
开发者ID:feir777,项目名称:wr1004sjl,代码行数:26,代码来源:macb.c


示例4: at91ether_close

/* Close the interface */
static int at91ether_close(struct net_device *dev)
{
	struct macb *lp = netdev_priv(dev);
	u32 ctl;

	/* Disable Receiver and Transmitter */
	ctl = macb_readl(lp, NCR);
	macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));

	/* Disable MAC interrupts */
	macb_writel(lp, IDR, MACB_BIT(RCOMP)	|
			     MACB_BIT(RXUBR)	|
			     MACB_BIT(ISR_TUND)	|
			     MACB_BIT(ISR_RLE)	|
			     MACB_BIT(TCOMP)	|
			     MACB_BIT(ISR_ROVR) |
			     MACB_BIT(HRESP));

	netif_stop_queue(dev);

	dma_free_coherent(&lp->pdev->dev,
				MAX_RX_DESCR * sizeof(struct macb_dma_desc),
				lp->rx_ring, lp->rx_ring_dma);
	lp->rx_ring = NULL;

	dma_free_coherent(&lp->pdev->dev,
				MAX_RX_DESCR * MAX_RBUFF_SZ,
				lp->rx_buffers, lp->rx_buffers_dma);
	lp->rx_buffers = NULL;

	return 0;
}
开发者ID:7799,项目名称:linux,代码行数:33,代码来源:at91_ether.c


示例5: macb_phy_init

static int macb_phy_init(struct macb_device *macb)
{
	struct eth_device *netdev = &macb->netdev;
	u32 ncfgr;
	u16 phy_id, status, adv, lpa;
	int media, speed, duplex;
	int i;

	/* Check if the PHY is up to snuff... */
	phy_id = macb_mdio_read(macb, MII_PHYSID1);
	if (phy_id == 0xffff) {
		printf("%s: No PHY present\n", netdev->name);
		return 0;
	}

	status = macb_mdio_read(macb, MII_BMSR);
	if (!(status & BMSR_LSTATUS)) {
		/* Try to re-negotiate if we don't have link already. */
		macb_phy_reset(macb);

		for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
			status = macb_mdio_read(macb, MII_BMSR);
			if (status & BMSR_LSTATUS)
				break;
			udelay(100);
		}
	}

	if (!(status & BMSR_LSTATUS)) {
		printf("%s: link down (status: 0x%04x)\n",
		       netdev->name, status);
		return 0;
	} else {
		adv = macb_mdio_read(macb, MII_ADVERTISE);
		lpa = macb_mdio_read(macb, MII_LPA);
		media = mii_nway_result(lpa & adv);
		speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
			 ? 1 : 0);
		duplex = (media & ADVERTISE_FULL) ? 1 : 0;
		printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
		       netdev->name,
		       speed ? "100" : "10",
		       duplex ? "full" : "half",
		       lpa);

		ncfgr = macb_readl(macb, NCFGR);
		ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
		if (speed)
			ncfgr |= MACB_BIT(SPD);
		if (duplex)
			ncfgr |= MACB_BIT(FD);
		macb_writel(macb, NCFGR, ncfgr);
		return 1;
	}
}
开发者ID:kipr,项目名称:u-boot-2009.07-silvermoon,代码行数:55,代码来源:macb.c


示例6: macb_send

static int macb_send(struct eth_device *netdev, void *packet, int length)
{
	struct macb_device *macb = to_macb(netdev);
	unsigned long paddr, ctrl;
	unsigned int tx_head = macb->tx_head;
	int i;
         
	paddr = dma_map_single(packet, length, DMA_TO_DEVICE);

	ctrl = length & TXBUF_FRMLEN_MASK;
	ctrl |= TXBUF_FRAME_END;
	if (tx_head == (MACB_TX_RING_SIZE - 1)) {
		ctrl |= TXBUF_WRAP;
		macb->tx_head = 0;
	} else {
		macb->tx_head++;
	}

	macb->tx_ring[tx_head].ctrl = ctrl;
	macb->tx_ring[tx_head].addr = paddr;
	barrier();
	macb_flush_ring_desc(macb, TX);
	/* Do we need check paddr and length is dcache line aligned? */
	flush_dcache_range(paddr, paddr + length);
	macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));

	/*
	 * I guess this is necessary because the networking core may
	 * re-use the transmit buffer as soon as we return...
	 */
	for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
		barrier();
		macb_invalidate_ring_desc(macb, TX);
		ctrl = macb->tx_ring[tx_head].ctrl;
		if (ctrl & TXBUF_USED)
			break;
		udelay(1);
	}

	dma_unmap_single(packet, length, paddr);

	if (i <= MACB_TX_TIMEOUT) {
		if (ctrl & TXBUF_UNDERRUN)
			printf("%s: TX underrun\n", netdev->name);
		if (ctrl & TXBUF_EXHAUSTED)
			printf("%s: TX buffers exhausted in mid frame\n",
			       netdev->name);
	} else {
		printf("%s: TX timeout\n", netdev->name);
	}

	/* No one cares anyway */ 
	return 0;
}
开发者ID:chendian,项目名称:uboot,代码行数:54,代码来源:macb.c


示例7: at91ether_open

/* Open the ethernet interface */
static int at91ether_open(struct net_device *dev)
{
	struct macb *lp = netdev_priv(dev);
	u32 ctl;
	int ret;

	/* Clear internal statistics */
	ctl = macb_readl(lp, NCR);
	macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));

	macb_set_hwaddr(lp);

	ret = at91ether_start(dev);
	if (ret)
		return ret;

	/* Enable MAC interrupts */
	macb_writel(lp, IER, MACB_BIT(RCOMP)	|
			     MACB_BIT(RXUBR)	|
			     MACB_BIT(ISR_TUND)	|
			     MACB_BIT(ISR_RLE)	|
			     MACB_BIT(TCOMP)	|
			     MACB_BIT(ISR_ROVR)	|
			     MACB_BIT(HRESP));

	/* schedule a link state check */
	phy_start(lp->phy_dev);

	netif_start_queue(dev);

	return 0;
}
开发者ID:7799,项目名称:linux,代码行数:33,代码来源:at91_ether.c


示例8: at91ether_start

/* Initialize and start the Receiver and Transmit subsystems */
static int at91ether_start(struct net_device *dev)
{
	struct macb *lp = netdev_priv(dev);
	dma_addr_t addr;
	u32 ctl;
	int i;

	lp->rx_ring = dma_alloc_coherent(&lp->pdev->dev,
					MAX_RX_DESCR * sizeof(struct macb_dma_desc),
					&lp->rx_ring_dma, GFP_KERNEL);
	if (!lp->rx_ring) {
		netdev_err(dev, "unable to alloc rx ring DMA buffer\n");
		return -ENOMEM;
	}

	lp->rx_buffers = dma_alloc_coherent(&lp->pdev->dev,
					MAX_RX_DESCR * MAX_RBUFF_SZ,
					&lp->rx_buffers_dma, GFP_KERNEL);
	if (!lp->rx_buffers) {
		netdev_err(dev, "unable to alloc rx data DMA buffer\n");

		dma_free_coherent(&lp->pdev->dev,
					MAX_RX_DESCR * sizeof(struct macb_dma_desc),
					lp->rx_ring, lp->rx_ring_dma);
		lp->rx_ring = NULL;
		return -ENOMEM;
	}

	addr = lp->rx_buffers_dma;
	for (i = 0; i < MAX_RX_DESCR; i++) {
		lp->rx_ring[i].addr = addr;
		lp->rx_ring[i].ctrl = 0;
		addr += MAX_RBUFF_SZ;
	}

	/* Set the Wrap bit on the last descriptor */
	lp->rx_ring[MAX_RX_DESCR - 1].addr |= MACB_BIT(RX_WRAP);

	/* Reset buffer index */
	lp->rx_tail = 0;

	/* Program address of descriptor list in Rx Buffer Queue register */
	macb_writel(lp, RBQP, lp->rx_ring_dma);

	/* Enable Receive and Transmit */
	ctl = macb_readl(lp, NCR);
	macb_writel(lp, NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE));

	return 0;
}
开发者ID:AdrianHuang,项目名称:linux-3.8.13,代码行数:51,代码来源:at91_ether.c


示例9: macb_phy_read

static int macb_phy_read(struct mii_device *mdev, int addr, int reg)
{
	struct eth_device *edev = mdev->edev;
	struct macb_device *macb = edev->priv;

	unsigned long netctl;
	unsigned long netstat;
	unsigned long frame;
	int iflag;
	int value;
	uint64_t start;

	debug("%s\n", __func__);

	iflag = disable_interrupts();
	netctl = readl(macb->regs + MACB_NCR);
	netctl |= MACB_BIT(MPE);
	writel(netctl, macb->regs + MACB_NCR);
	if (iflag)
		enable_interrupts();

	frame = (MACB_BF(SOF, 1)
		 | MACB_BF(RW, 2)
		 | MACB_BF(PHYA, addr)
		 | MACB_BF(REGA, reg)
		 | MACB_BF(CODE, 2));
	writel(frame, macb->regs + MACB_MAN);

	start = get_time_ns();
	do {
		netstat = readl(macb->regs + MACB_NSR);
		if (is_timeout(start, SECOND)) {
			printf("phy read timed out\n");
			return -1;
		}
	} while (!(netstat & MACB_BIT(IDLE)));

	frame = readl(macb->regs + MACB_MAN);
	value = MACB_BFEXT(DATA, frame);

	iflag = disable_interrupts();
	netctl = readl(macb->regs + MACB_NCR);
	netctl &= ~MACB_BIT(MPE);
	writel(netctl, macb->regs + MACB_NCR);
	if (iflag)
		enable_interrupts();

	return value;
}
开发者ID:ray650128,项目名称:barebox-sh4-nextvod,代码行数:49,代码来源:macb.c


示例10: at91ether_start_xmit

/* Transmit packet */
static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
	struct macb *lp = netdev_priv(dev);

	if (macb_readl(lp, TSR) & MACB_BIT(RM9200_BNQ)) {
		netif_stop_queue(dev);

		/* Store packet information (to free when Tx completed) */
		lp->skb = skb;
		lp->skb_length = skb->len;
		lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len,
							DMA_TO_DEVICE);

		/* Set address of the data in the Transmit Address register */
		macb_writel(lp, TAR, lp->skb_physaddr);
		/* Set length of the packet in the Transmit Control register */
		macb_writel(lp, TCR, skb->len);

	} else {
		netdev_err(dev, "%s called, but device is busy!\n", __func__);
		return NETDEV_TX_BUSY;
	}

	return NETDEV_TX_OK;
}
开发者ID:7799,项目名称:linux,代码行数:26,代码来源:at91_ether.c


示例11: _macb_halt

static void _macb_halt(struct macb_device *macb)
{
	u32 ncr, tsr;

	/* Halt the controller and wait for any ongoing transmission to end. */
	ncr = macb_readl(macb, NCR);
	ncr |= MACB_BIT(THALT);
	macb_writel(macb, NCR, ncr);

	do {
		tsr = macb_readl(macb, TSR);
	} while (tsr & MACB_BIT(TGO));

	/* Disable TX and RX, and clear statistics */
	macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
}
开发者ID:RobertCNelson,项目名称:u-boot-boards,代码行数:16,代码来源:macb.c


示例12: macb_init

static int macb_init(struct eth_device *edev)
{
	struct macb_device *macb = edev->priv;
	unsigned long paddr, val = 0;
	int i;

	debug("%s\n", __func__);

	/*
	 * macb_halt should have been called at some point before now,
	 * so we'll assume the controller is idle.
	 */

	/* initialize DMA descriptors */
	paddr = (ulong)macb->rx_buffer;
	for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
		if (i == (CFG_MACB_RX_RING_SIZE - 1))
			paddr |= RXADDR_WRAP;
		macb->rx_ring[i].addr = paddr;
		macb->rx_ring[i].ctrl = 0;
		paddr += 128;
	}

	macb->tx_ring[0].addr = 0;
	macb->tx_ring[0].ctrl = TXBUF_USED | TXBUF_WRAP;

	macb->rx_tail = macb->tx_tail = 0;

	writel((ulong)macb->rx_ring, macb->regs + MACB_RBQP);
	writel((ulong)macb->tx_ring, macb->regs + MACB_TBQP);

	if (macb->flags & AT91SAM_ETHER_RMII)
		val |= MACB_BIT(RMII);
	else
		val &= ~MACB_BIT(RMII);

#if defined(CONFIG_ARCH_AT91)
	val |= MACB_BIT(CLKEN);
#endif
	writel(val, macb->regs + MACB_USRIO);

	/* Enable TX and RX */
	writel(MACB_BIT(TE) | MACB_BIT(RE), macb->regs + MACB_NCR);

	return 0;
}
开发者ID:ray650128,项目名称:barebox-sh4-nextvod,代码行数:46,代码来源:macb.c


示例13: macb_halt

static void macb_halt(struct eth_device *edev)
{
	struct macb_device *macb = edev->priv;
	u32 ncr, tsr;

	/* Halt the controller and wait for any ongoing transmission to end. */
	ncr = readl(macb->regs + MACB_NCR);
	ncr |= MACB_BIT(THALT);
	writel(ncr, macb->regs + MACB_NCR);

	do {
		tsr = readl(macb->regs + MACB_TSR);
	} while (tsr & MACB_BIT(TGO));

	/* Disable TX and RX, and clear statistics */
	writel(MACB_BIT(CLRSTAT), macb->regs + MACB_NCR);
}
开发者ID:ray650128,项目名称:barebox-sh4-nextvod,代码行数:17,代码来源:macb.c


示例14: macb_open

static int macb_open(struct eth_device *edev)
{
	struct macb_device *macb = edev->priv;
	int duplex = 1, speed = 1;
	u32 ncfgr;

	debug("%s\n", __func__);

	miidev_wait_aneg(&macb->miidev);
	miidev_print_status(&macb->miidev);

	ncfgr = readl(macb->regs + MACB_NCFGR);
	ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
	if (speed)
		ncfgr |= MACB_BIT(SPD);
	if (duplex)
		ncfgr |= MACB_BIT(FD);
	writel(ncfgr, macb->regs + MACB_NCFGR);

	return 0;
}
开发者ID:ray650128,项目名称:barebox-sh4-nextvod,代码行数:21,代码来源:macb.c


示例15: at91ether_rx

/* Extract received frame from buffer descriptors and sent to upper layers.
 * (Called from interrupt context)
 */
static void at91ether_rx(struct net_device *dev)
{
	struct macb *lp = netdev_priv(dev);
	unsigned char *p_recv;
	struct sk_buff *skb;
	unsigned int pktlen;

	while (lp->rx_ring[lp->rx_tail].addr & MACB_BIT(RX_USED)) {
		p_recv = lp->rx_buffers + lp->rx_tail * MAX_RBUFF_SZ;
		pktlen = MACB_BF(RX_FRMLEN, lp->rx_ring[lp->rx_tail].ctrl);
		skb = netdev_alloc_skb(dev, pktlen + 2);
		if (skb) {
			skb_reserve(skb, 2);
			memcpy(skb_put(skb, pktlen), p_recv, pktlen);

			skb->protocol = eth_type_trans(skb, dev);
			lp->stats.rx_packets++;
			lp->stats.rx_bytes += pktlen;
			netif_rx(skb);
		} else {
			lp->stats.rx_dropped++;
			netdev_notice(dev, "Memory squeeze, dropping packet.\n");
		}

		if (lp->rx_ring[lp->rx_tail].ctrl & MACB_BIT(RX_MHASH_MATCH))
			lp->stats.multicast++;

		/* reset ownership bit */
		lp->rx_ring[lp->rx_tail].addr &= ~MACB_BIT(RX_USED);

		/* wrap after last buffer */
		if (lp->rx_tail == MAX_RX_DESCR - 1)
			lp->rx_tail = 0;
		else
			lp->rx_tail++;
	}
}
开发者ID:AdrianHuang,项目名称:linux-3.8.13,代码行数:40,代码来源:at91_ether.c


示例16: macb_send

static int macb_send(struct eth_device *edev, void *packet,
		     int length)
{
	struct macb_device *macb = edev->priv;
	unsigned long ctrl;

	debug("%s\n", __func__);

	ctrl = length & TXBUF_FRMLEN_MASK;
	ctrl |= TXBUF_FRAME_END | TXBUF_WRAP;

	macb->tx_ring[0].ctrl = ctrl;
	macb->tx_ring[0].addr = (ulong)packet;
	barrier();
	writel(MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART), macb->regs + MACB_NCR);

	if (ctrl & TXBUF_UNDERRUN)
		printf("TX underrun\n");
	if (ctrl & TXBUF_EXHAUSTED)
		printf("TX buffers exhausted in mid frame\n");

	/* No one cares anyway */
	return 0;
}
开发者ID:ray650128,项目名称:barebox-sh4-nextvod,代码行数:24,代码来源:macb.c


示例17: at91ether_interrupt

/* MAC interrupt handler */
static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
{
	struct net_device *dev = dev_id;
	struct macb *lp = netdev_priv(dev);
	u32 intstatus, ctl;

	/* MAC Interrupt Status register indicates what interrupts are pending.
	 * It is automatically cleared once read.
	 */
	intstatus = macb_readl(lp, ISR);

	/* Receive complete */
	if (intstatus & MACB_BIT(RCOMP))
		at91ether_rx(dev);

	/* Transmit complete */
	if (intstatus & MACB_BIT(TCOMP)) {
		/* The TCOM bit is set even if the transmission failed */
		if (intstatus & (MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)))
			lp->stats.tx_errors++;

		if (lp->skb) {
			dev_kfree_skb_irq(lp->skb);
			lp->skb = NULL;
			dma_unmap_single(NULL, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE);
			lp->stats.tx_packets++;
			lp->stats.tx_bytes += lp->skb_length;
		}
		netif_wake_queue(dev);
	}

	/* Work-around for EMAC Errata section 41.3.1 */
	if (intstatus & MACB_BIT(RXUBR)) {
		ctl = macb_readl(lp, NCR);
		macb_writel(lp, NCR, ctl & ~MACB_BIT(RE));
		macb_writel(lp, NCR, ctl | MACB_BIT(RE));
	}

	if (intstatus & MACB_BIT(ISR_ROVR))
		netdev_err(dev, "ROVR error\n");

	return IRQ_HANDLED;
}
开发者ID:7799,项目名称:linux,代码行数:44,代码来源:at91_ether.c


示例18: at91ether_probe

/* Detect MAC & PHY and perform ethernet interface initialization */
static int __init at91ether_probe(struct platform_device *pdev)
{
	struct macb_platform_data *board_data = dev_get_platdata(&pdev->dev);
	struct resource *regs;
	struct net_device *dev;
	struct phy_device *phydev;
	struct macb *lp;
	int res;
	u32 reg;
	const char *mac;

	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!regs)
		return -ENOENT;

	dev = alloc_etherdev(sizeof(struct macb));
	if (!dev)
		return -ENOMEM;

	lp = netdev_priv(dev);
	lp->pdev = pdev;
	lp->dev = dev;
	spin_lock_init(&lp->lock);

	/* physical base address */
	dev->base_addr = regs->start;
	lp->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
	if (!lp->regs) {
		res = -ENOMEM;
		goto err_free_dev;
	}

	/* Clock */
	lp->pclk = devm_clk_get(&pdev->dev, "ether_clk");
	if (IS_ERR(lp->pclk)) {
		res = PTR_ERR(lp->pclk);
		goto err_free_dev;
	}
	clk_enable(lp->pclk);

	lp->hclk = ERR_PTR(-ENOENT);
	lp->tx_clk = ERR_PTR(-ENOENT);

	/* Install the interrupt handler */
	dev->irq = platform_get_irq(pdev, 0);
	res = devm_request_irq(&pdev->dev, dev->irq, at91ether_interrupt, 0, dev->name, dev);
	if (res)
		goto err_disable_clock;

	ether_setup(dev);
	dev->netdev_ops = &at91ether_netdev_ops;
	dev->ethtool_ops = &macb_ethtool_ops;
	platform_set_drvdata(pdev, dev);
	SET_NETDEV_DEV(dev, &pdev->dev);

	mac = of_get_mac_address(pdev->dev.of_node);
	if (mac)
		memcpy(lp->dev->dev_addr, mac, ETH_ALEN);
	else
		macb_get_hwaddr(lp);

	res = of_get_phy_mode(pdev->dev.of_node);
	if (res < 0) {
		if (board_data && board_data->is_rmii)
			lp->phy_interface = PHY_INTERFACE_MODE_RMII;
		else
			lp->phy_interface = PHY_INTERFACE_MODE_MII;
	} else {
		lp->phy_interface = res;
	}

	macb_writel(lp, NCR, 0);

	reg = MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG);
	if (lp->phy_interface == PHY_INTERFACE_MODE_RMII)
		reg |= MACB_BIT(RM9200_RMII);

	macb_writel(lp, NCFGR, reg);

	/* Register the network interface */
	res = register_netdev(dev);
	if (res)
		goto err_disable_clock;

	res = macb_mii_init(lp);
	if (res)
		goto err_out_unregister_netdev;

	/* will be enabled in open() */
	netif_carrier_off(dev);

	phydev = lp->phy_dev;
	netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
				phydev->drv->name, dev_name(&phydev->dev),
				phydev->irq);

	/* Display ethernet banner */
	netdev_info(dev, "AT91 ethernet at 0x%08lx int=%d (%pM)\n",
				dev->base_addr, dev->irq, dev->dev_addr);
//.........这里部分代码省略.........
开发者ID:7799,项目名称:linux,代码行数:101,代码来源:at91_ether.c


示例19: _macb_init

static int _macb_init(struct macb_device *macb, const char *name)
#endif
{
#ifdef CONFIG_DM_ETH
	struct macb_device *macb = dev_get_priv(dev);
#endif
	unsigned long paddr;
	int i;

	/*
	 * macb_halt should have been called at some point before now,
	 * so we'll assume the controller is idle.
	 */

	/* initialize DMA descriptors */
	paddr = macb->rx_buffer_dma;
	for (i = 0; i < MACB_RX_RING_SIZE; i++) {
		if (i == (MACB_RX_RING_SIZE - 1))
			paddr |= RXADDR_WRAP;
		macb->rx_ring[i].addr = paddr;
		macb->rx_ring[i].ctrl = 0;
		paddr += 128;
	}
	macb_flush_ring_desc(macb, RX);
	macb_flush_rx_buffer(macb);

	for (i = 0; i < MACB_TX_RING_SIZE; i++) {
		macb->tx_ring[i].addr = 0;
		if (i == (MACB_TX_RING_SIZE - 1))
			macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
		else
			macb->tx_ring[i].ctrl = TXBUF_USED;
	}
	macb_flush_ring_desc(macb, TX);

	macb->rx_tail = 0;
	macb->tx_head = 0;
	macb->tx_tail = 0;
	macb->next_rx_tail = 0;

	macb_writel(macb, RBQP, macb->rx_ring_dma);
	macb_writel(macb, TBQP, macb->tx_ring_dma);

	if (macb_is_gem(macb)) {
		/* Check the multi queue and initialize the queue for tx */
		gmac_init_multi_queues(macb);

		/*
		 * When the GMAC IP with GE feature, this bit is used to
		 * select interface between RGMII and GMII.
		 * When the GMAC IP without GE feature, this bit is used
		 * to select interface between RMII and MII.
		 */
#ifdef CONFIG_DM_ETH
		if ((macb->phy_interface == PHY_INTERFACE_MODE_RMII) ||
		    (macb->phy_interface == PHY_INTERFACE_MODE_RGMII))
			gem_writel(macb, UR, GEM_BIT(RGMII));
		else
			gem_writel(macb, UR, 0);
#else
#if defined(CONFIG_RGMII) || defined(CONFIG_RMII)
		gem_writel(macb, UR, GEM_BIT(RGMII));
#else
		gem_writel(macb, UR, 0);
#endif
#endif
	} else {
	/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_DM_ETH
#ifdef CONFIG_AT91FAMILY
		if (macb->phy_interface == PHY_INTERFACE_MODE_RMII) {
			macb_writel(macb, USRIO,
				    MACB_BIT(RMII) | MACB_BIT(CLKEN));
		} else {
			macb_writel(macb, USRIO, MACB_BIT(CLKEN));
		}
#else
		if (macb->phy_interface == PHY_INTERFACE_MODE_RMII)
			macb_writel(macb, USRIO, 0);
		else
			macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
#else
#ifdef CONFIG_RMII
#ifdef CONFIG_AT91FAMILY
	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
#else
	macb_writel(macb, USRIO, 0);
#endif
#else
#ifdef CONFIG_AT91FAMILY
	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
	macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
#endif /* CONFIG_RMII */
#endif
	}

#ifdef CONFIG_DM_ETH
//.........这里部分代码省略.........
开发者ID:RobertCNelson,项目名称:u-boot-boards,代码行数:101,代码来源:macb.c


示例20: macb_phy_init

static int macb_phy_init(struct macb_device *macb, const char *name)
#endif
{
#ifdef CONFIG_DM_ETH
	struct macb_device *macb = dev_get_priv(dev);
#endif
	u32 ncfgr;
	u16 phy_id, status, adv, lpa;
	int media, speed, duplex;
	int i;

	arch_get_mdio_control(name);
	/* Auto-detect phy_addr */
	if (!macb_phy_find(macb, name))
		return 0;

	/* Check if the PHY is up to snuff... */
	phy_id = macb_mdio_read(macb, MII_PHYSID1);
	if (phy_id == 0xffff) {
		printf("%s: No PHY present\n", name);
		return 0;
	}

#ifdef CONFIG_PHYLIB
#ifdef CONFIG_DM_ETH
	macb->phydev = phy_connect(macb->bus, macb->phy_addr, dev,
			     macb->phy_interface);
#else
	/* need to consider other phy interface mode */
	macb->phydev = phy_connect(macb->bus, macb->phy_addr, &macb->netdev,
			     PHY_INTERFACE_MODE_RGMII);
#endif
	if (!macb->phydev) {
		printf("phy_connect failed\n");
		return -ENODEV;
	}

	phy_config(macb->phydev);
#endif

	status = macb_mdio_read(macb, MII_BMSR);
	if (!(status & BMSR_LSTATUS)) {
		/* Try to re-negotiate if we don't have link already. */
		macb_phy_reset(macb, name);

		for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
			status = macb_mdio_read(macb, MII_BMSR);
			if (status & BMSR_LSTATUS)
				break;
			udelay(100);
		}
	}

	if (!(status & BMSR_LSTATUS)) {
		printf("%s: link down (status: 0x%04x)\n",
		       name, status);
		return 0;
	}

	/* First check for GMAC and that it is GiB capable */
	if (gem_is_gigabit_capable(macb)) {
		lpa = macb_mdio_read(macb, MII_STAT1000);

		if (lpa & (LPA_1000FULL | LPA_1000HALF)) {
			duplex = ((lpa & LPA_1000FULL) ? 1 : 0);

			printf("%s: link up, 1000Mbps %s-duplex (lpa: 0x%04x)\n",
			       name,
			       duplex ? "full" : "half",
			       lpa);

			ncfgr = macb_readl(macb, NCFGR);
			ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
			ncfgr |= GEM_BIT(GBE);

			if (duplex)
				ncfgr |= MACB_BIT(FD);

			macb_writel(macb, NCFGR, ncfgr);

			return 1;
		}
	}

	/* fall back for EMAC checking */
	adv = macb_mdio_read(macb, MII_ADVERTISE);
	lpa = macb_mdio_read(macb, MII_LPA);
	media = mii_nway_result(lpa & adv);
	speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
		 ? 1 : 0);
	duplex = (media & ADVERTISE_FULL) ? 1 : 0;
	printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
	       name,
	       speed ? "100" : "10",
	       duplex ? "full" : "half",
	       lpa);

	ncfgr = macb_readl(macb, NCFGR);
	ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD) | GEM_BIT(GBE));
	if (speed)
//.........这里部分代码省略.........
开发者ID:RobertCNelson,项目名称:u-boot-boards,代码行数:101,代码来源:macb.c



注:本文中的MACB_BIT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MACHINE函数代码示例发布时间:2022-05-30
下一篇:
C++ MAC2STR函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap