本文整理汇总了C++中ListFindItem函数的典型用法代码示例。如果您正苦于以下问题:C++ ListFindItem函数的具体用法?C++ ListFindItem怎么用?C++ ListFindItem使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ListFindItem函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: MQTTProtocol_handlePubacks
/**
* Process an incoming puback packet for a socket
* @param pack pointer to the publish packet
* @param sock the socket on which the packet was received
* @return completion code
*/
int MQTTProtocol_handlePubacks(void* pack, int sock)
{
Puback* puback = (Puback*)pack;
Clients* client = (Clients*)(ListFindItem(bstate->clients, &sock, clientSocketCompare)->content);
int rc = TCPSOCKET_COMPLETE;
FUNC_ENTRY;
Log(LOG_PROTOCOL, 14, NULL, sock, client->clientID, puback->msgId);
/* look for the message by message id in the records of outbound messages for this client */
if (ListFindItem(client->outboundMsgs, &(puback->msgId), messageIDCompare) == NULL)
Log(LOG_WARNING, 50, NULL, "PUBACK", client->clientID, puback->msgId);
else
{
Messages* m = (Messages*)(client->outboundMsgs->current->content);
if (m->qos != 1)
Log(LOG_WARNING, 51, NULL, "PUBACK", client->clientID, puback->msgId, m->qos);
else
{
Log(TRACE_MIN, 4, NULL, client->clientID, puback->msgId);
++(bstate->msgs_sent);
bstate->bytes_sent += m->publish->payloadlen;
MQTTProtocol_removePublication(m->publish);
ListRemove(client->outboundMsgs, m);
}
}
free(pack);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:Frank-KunLi,项目名称:rsmb,代码行数:36,代码来源:MQTTProtocolClient.c
示例2: MQTTProtocol_handlePubacks
/**
* Process an incoming puback packet for a socket
* @param pack pointer to the publish packet
* @param sock the socket on which the packet was received
* @return completion code
*/
int MQTTProtocol_handlePubacks(void* pack, int sock)
{
Puback* puback = (Puback*)pack;
Clients* client = NULL;
int rc = TCPSOCKET_COMPLETE;
FUNC_ENTRY;
client = (Clients*)(ListFindItem(bstate->clients, &sock, clientSocketCompare)->content);
Log(LOG_PROTOCOL, 14, NULL, sock, client->clientID, puback->msgId);
/* look for the message by message id in the records of outbound messages for this client */
if (ListFindItem(client->outboundMsgs, &(puback->msgId), messageIDCompare) == NULL)
Log(TRACE_MIN, 3, NULL, "PUBACK", client->clientID, puback->msgId);
else
{
Messages* m = (Messages*)(client->outboundMsgs->current->content);
if (m->qos != 1)
Log(TRACE_MIN, 4, NULL, "PUBACK", client->clientID, puback->msgId, m->qos);
else
{
Log(TRACE_MIN, 6, NULL, "PUBACK", client->clientID, puback->msgId);
#if !defined(NO_PERSISTENCE)
rc = MQTTPersistence_remove(client, PERSISTENCE_PUBLISH_SENT, m->qos, puback->msgId);
#endif
MQTTProtocol_removePublication(m->publish);
ListRemove(client->outboundMsgs, m);
}
}
free(pack);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:macchina-io,项目名称:macchina.io,代码行数:38,代码来源:MQTTProtocolClient.c
示例3: MQTTProtocol_handlePubrels
/**
* Process an incoming pubrel packet for a socket
* @param pack pointer to the publish packet
* @param sock the socket on which the packet was received
* @return completion code
*/
int MQTTProtocol_handlePubrels(void* pack, int sock)
{
Pubrel* pubrel = (Pubrel*)pack;
Clients* client = (Clients*)(ListFindItem(bstate->clients, &sock, clientSocketCompare)->content);
int rc = TCPSOCKET_COMPLETE;
FUNC_ENTRY;
Log(LOG_PROTOCOL, 17, NULL, sock, client->clientID, pubrel->msgId);
/* look for the message by message id in the records of inbound messages for this client */
if (ListFindItem(client->inboundMsgs, &(pubrel->msgId), messageIDCompare) == NULL)
{
if (pubrel->header.bits.dup == 0)
Log(LOG_WARNING, 50, NULL, "PUBREL", client->clientID, pubrel->msgId);
/* Apparently this is "normal" behaviour, so we don't need to issue a warning */
rc = MQTTPacket_send_pubcomp(pubrel->msgId, sock, client->clientID);
}
else
{
Messages* m = (Messages*)(client->inboundMsgs->current->content);
if (m->qos != 2)
Log(LOG_WARNING, 51, NULL, "PUBREL", client->clientID, pubrel->msgId, m->qos);
else if (m->nextMessageType != PUBREL)
Log(LOG_WARNING, 52, NULL, "PUBREL", client->clientID, pubrel->msgId);
else
{
Publish publish;
char saved_clientid[MAX_CLIENTID_LEN + 1];
strcpy(saved_clientid, client->clientID);
/* send pubcomp before processing the publications because a lot of return publications could fill up the socket buffer */
rc = MQTTPacket_send_pubcomp(pubrel->msgId, sock, client->clientID);
publish.header.bits.qos = m->qos;
publish.header.bits.retain = m->retain;
publish.msgId = m->msgid;
publish.topic = m->publish->topic;
publish.payload = m->publish->payload;
publish.payloadlen = m->publish->payloadlen;
publish.priority = m->priority;
++(bstate->msgs_received);
bstate->bytes_received += m->publish->payloadlen;
Protocol_processPublication(&publish, client->clientID);
/* The client structure might have been removed in processPublication, on error */
if (ListFindItem(bstate->clients, saved_clientid, clientIDCompare))
{
ListRemove(client->inboundMsgs, m);
MQTTProtocol_removePublication(m->publish);
}
}
}
free(pack);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:Frank-KunLi,项目名称:rsmb,代码行数:61,代码来源:MQTTProtocolClient.c
示例4: MQTTProtocol_handleGets
int MQTTProtocol_handleGets(void* pack, int sock)
{
Getack* getack = (Getack*)pack;
Clients* client = NULL;
char* clientid = NULL;
int rc = TCPSOCKET_COMPLETE;
FUNC_ENTRY;
// printf("------>%s, %s, %d\n", __func__, getack->ack_payload.ret_string, getack->ack_payload.ext_cmd);
client = (Clients*)(ListFindItem(bstate->clients, &sock, clientSocketCompare)->content);
clientid = client->clientID;
// Log(LOG_PROTOCOL, 11, NULL, sock, clientid, getack->msgId, get->header.bits.qos,
// getack->header.bits.retain, min(20, getack->ext_payloadlen), get->ext_payload);
/* here we needn't process some just like publish. only to parse ext ack, get one callback. */
#if 0
if (get->header.bits.qos == 0)
Protocol_processPublication(get, client);
else if (get->header.bits.qos == 1)
{
/* send puback before processing the publications because a lot of return publications could fill up the socket buffer */
rc = MQTTPacket_send_puback(publish->msgId, &client->net, client->clientID);
/* if we get a socket error from sending the puback, should we ignore the publication? */
Protocol_processPublication(publish, client);
}
else if (publish->header.bits.qos == 2)
{
/* store publication in inbound list */
int len;
ListElement* listElem = NULL;
Messages* m = malloc(sizeof(Messages));
Publications* p = MQTTProtocol_storePublication(publish, &len);
m->publish = p;
m->msgid = publish->msgId;
m->qos = publish->header.bits.qos;
m->retain = publish->header.bits.retain;
m->nextMessageType = PUBREL;
if ( ( listElem = ListFindItem(client->inboundMsgs, &(m->msgid), messageIDCompare) ) != NULL )
{ /* discard queued publication with same msgID that the current incoming message */
Messages* msg = (Messages*)(listElem->content);
MQTTProtocol_removePublication(msg->publish);
ListInsert(client->inboundMsgs, m, sizeof(Messages) + len, listElem);
ListRemove(client->inboundMsgs, msg);
} else
ListAppend(client->inboundMsgs, m, sizeof(Messages) + len);
rc = MQTTPacket_send_pubrec(publish->msgId, &client->net, client->clientID);
publish->topic = NULL;
}
MQTTPacket_freePublish(publish);
#endif
MQTTPacket_freeGet(getack);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:is00hcw,项目名称:yunba-c-sdk,代码行数:55,代码来源:MQTTProtocolClient.c
示例5: MQTTProtocol_handlePubrels
/**
* Process an incoming pubrel packet for a socket
* @param pack pointer to the publish packet
* @param sock the socket on which the packet was received
* @return completion code
*/
int MQTTProtocol_handlePubrels(void* pack, int sock)
{
Pubrel* pubrel = (Pubrel*)pack;
Clients* client = NULL;
int rc = TCPSOCKET_COMPLETE;
FUNC_ENTRY;
client = (Clients*)(ListFindItem(bstate->clients, &sock, clientSocketCompare)->content);
Log(LOG_PROTOCOL, 17, NULL, sock, client->clientID, pubrel->msgId);
/* look for the message by message id in the records of inbound messages for this client */
if (ListFindItem(client->inboundMsgs, &(pubrel->msgId), messageIDCompare) == NULL)
{
if (pubrel->header.bits.dup == 0)
Log(TRACE_MIN, 3, NULL, "PUBREL", client->clientID, pubrel->msgId);
else
/* Apparently this is "normal" behaviour, so we don't need to issue a warning */
rc = MQTTPacket_send_pubcomp(pubrel->msgId, &client->net, client->clientID);
}
else
{
Messages* m = (Messages*)(client->inboundMsgs->current->content);
if (m->qos != 2)
Log(TRACE_MIN, 4, NULL, "PUBREL", client->clientID, pubrel->msgId, m->qos);
else if (m->nextMessageType != PUBREL)
Log(TRACE_MIN, 5, NULL, "PUBREL", client->clientID, pubrel->msgId);
else
{
Publish publish;
/* send pubcomp before processing the publications because a lot of return publications could fill up the socket buffer */
rc = MQTTPacket_send_pubcomp(pubrel->msgId, &client->net, client->clientID);
publish.header.bits.qos = m->qos;
publish.header.bits.retain = m->retain;
publish.msgId = m->msgid;
publish.topic = m->publish->topic;
publish.topiclen = m->publish->topiclen;
publish.payload = m->publish->payload;
publish.payloadlen = m->publish->payloadlen;
Protocol_processPublication(&publish, client);
#if !defined(NO_PERSISTENCE)
rc += MQTTPersistence_remove(client, PERSISTENCE_PUBLISH_RECEIVED, m->qos, pubrel->msgId);
#endif
ListRemove(&(state.publications), m->publish);
ListRemove(client->inboundMsgs, m);
++(state.msgs_received);
}
}
free(pack);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:macchina-io,项目名称:macchina.io,代码行数:58,代码来源:MQTTProtocolClient.c
示例6: MQTTSProtocol_handlePubacks
int MQTTSProtocol_handlePubacks(void* pack, int sock, char* clientAddr, Clients* client)
{
int rc = 0;
MQTTS_PubAck* puback = (MQTTS_PubAck*)pack;
FUNC_ENTRY;
Log(LOG_PROTOCOL, 57, NULL, sock, clientAddr, client ? client->clientID : "", puback->msgId);
/* look for the message by message id in the records of outbound messages for this client */
if (ListFindItem(client->outboundMsgs, &(puback->msgId), messageIDCompare) == NULL)
Log(LOG_WARNING, 50, NULL, "PUBACK", client->clientID, puback->msgId);
else
{
Messages* m = (Messages*)(client->outboundMsgs->current->content);
if (m->qos != 1)
Log(LOG_WARNING, 51, NULL, "PUBACK", client->clientID, puback->msgId, m->qos);
else
{
Log(TRACE_MAX, 4, NULL, client->clientID, puback->msgId);
MQTTProtocol_removePublication(m->publish);
ListRemove(client->outboundMsgs, m);
/* TODO: msgs counts */
/* (++state.msgs_sent);*/
}
}
MQTTSPacket_free_packet(pack);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:Frank-KunLi,项目名称:rsmb,代码行数:29,代码来源:MQTTSProtocol.c
示例7: ListFindItem
/**
* Reallocates a block of memory. A direct replacement for realloc, but keeps track of items
* allocated in a list, so that free can check that a item is being freed correctly and that
* we can check that all memory is freed at shutdown.
* @param file use the __FILE__ macro to indicate which file this item was reallocated in
* @param line use the __LINE__ macro to indicate which line this item was reallocated at
* @param p pointer to the item to be reallocated
* @param size the new size of the item
* @return pointer to the allocated item, or NULL if there was an error
*/
void *myrealloc(char* file, int line, void* p, size_t size)
{
void* rc = NULL;
ListElement* e = ListFindItem(&heap, p, ptrCompare);
if (e == NULL)
Log(LOG_ERROR, -1, "Failed to reallocate heap item at file %s line %d", file, line);
else
{
storageElement* s = (storageElement*)(heap.current->content);
state.current_size += size - s->size;
if (state.current_size > state.max_size)
state.max_size = state.current_size;
rc = s->ptr = realloc(s->ptr, size);
s->size = size;
s->file = realloc(s->file, strlen(file)+1);
strcpy(s->file, file);
s->line = line;
if (s->stack)
{
free(s->stack);
s->stack = StackTrace_get(Thread_getid());
}
}
return rc;
}
开发者ID:FlavioFalcao,项目名称:RSSI-Sniffer,代码行数:36,代码来源:Heap.c
示例8: ListUnlink
/**
* Removes and optionally frees an element in a list by comparing the content.
* A callback function is used to define the method of comparison for each element.
* @param aList the list in which the search is to be conducted
* @param content pointer to the content to look for
* @param callback pointer to a function which compares each element
* @param freeContent boolean value to indicate whether the item found is to be freed
* @return 1=item removed, 0=item not removed
*/
int ListUnlink(List* aList, void* content, int(*callback)(void*, void*), int freeContent)
{
ListElement* next = NULL;
ListElement* saved = aList->current;
int saveddeleted = 0;
if (!ListFindItem(aList, content, callback))
return 0; /* false, did not remove item */
if (aList->current->prev == NULL)
/* so this is the first element, and we have to update the "first" pointer */
aList->first = aList->current->next;
else
aList->current->prev->next = aList->current->next;
if (aList->current->next == NULL)
aList->last = aList->current->prev;
else
aList->current->next->prev = aList->current->prev;
next = aList->current->next;
if (freeContent)
free(aList->current->content);
if (saved == aList->current)
saveddeleted = 1;
free(aList->current);
if (saveddeleted)
aList->current = next;
else
aList->current = saved;
--(aList->count);
return 1; /* successfully removed item */
}
开发者ID:CJxD,项目名称:paho.mqtt.c,代码行数:42,代码来源:LinkedList.c
示例9: MQTTProtocol_assignMsgId
/**
* Assign a new message id for a client. Make sure it isn't already being used and does
* not exceed the maximum.
* @param client a client structure
* @return the next message id to use, or 0 if none available
*/
uint64_t MQTTProtocol_assignMsgId(Clients* client)
{
uint64_t msgid;
FUNC_ENTRY;
msgid = generate_uuid();
client->msgID = msgid;
FUNC_EXIT_RC(msgid);
return msgid;
#if 0
int start_msgid = client->msgID;
uint64_t msgid = start_msgid;
FUNC_ENTRY;
msgid = (msgid == MAX_MSG_ID) ? 1 : msgid + 1;
while (ListFindItem(client->outboundMsgs, &msgid, messageIDCompare) != NULL)
{
msgid = (msgid == MAX_MSG_ID) ? 1 : msgid + 1;
if (msgid == start_msgid)
{ /* we've tried them all - none free */
msgid = 0;
break;
}
}
if (msgid != 0)
client->msgID = msgid;
FUNC_EXIT_RC(msgid);
return msgid;
#endif
}
开发者ID:is00hcw,项目名称:yunba-c-sdk,代码行数:35,代码来源:MQTTProtocolClient.c
示例10: MQTTClient_yield
void MQTTClient_yield(void)
{
START_TIME_TYPE start = MQTTClient_start_clock();
unsigned long elapsed = 0L;
unsigned long timeout = 100L;
int rc = 0;
FUNC_ENTRY;
if (running)
{
MQTTClient_sleep(timeout);
goto exit;
}
elapsed = MQTTClient_elapsed(start);
do
{
int sock = -1;
MQTTClient_cycle(&sock, (timeout > elapsed) ? timeout - elapsed : 0L, &rc);
if (rc == SOCKET_ERROR && ListFindItem(handles, &sock, clientSockCompare))
{
MQTTClients* m = (MQTTClient)(handles->current->content);
if (m->c->connect_state != -2)
MQTTClient_disconnect_internal(m, 0);
}
elapsed = MQTTClient_elapsed(start);
}
while (elapsed < timeout);
exit:
FUNC_EXIT;
}
开发者ID:krattai,项目名称:noo-ebs,代码行数:31,代码来源:MQTTClient.c
示例11: SocketBuffer_getQueuedData
/**
* Get any queued data for a specific socket
* @param socket the socket to get queued data for
* @param bytes the number of bytes of data to retrieve
* @param actual_len the actual length returned
* @return the actual data
*/
char* SocketBuffer_getQueuedData(int socket, size_t bytes, size_t* actual_len)
{
socket_queue* queue = NULL;
FUNC_ENTRY;
if (ListFindItem(queues, &socket, socketcompare))
{ /* if there is queued data for this socket, add any data read to it */
queue = (socket_queue*)(queues->current->content);
*actual_len = queue->datalen;
}
else
{
*actual_len = 0;
queue = def_queue;
}
if (bytes > queue->buflen)
{
if (queue->datalen > 0)
{
void* newmem = malloc(bytes);
memcpy(newmem, queue->buf, queue->datalen);
free(queue->buf);
queue->buf = newmem;
}
else
queue->buf = realloc(queue->buf, bytes);
queue->buflen = bytes;
}
FUNC_EXIT;
return queue->buf;
}
开发者ID:CJxD,项目名称:paho.mqtt.c,代码行数:39,代码来源:SocketBuffer.c
示例12: SocketBuffer_getQueuedChar
/**
* Get any queued character for a specific socket
* @param socket the socket to get queued data for
* @param c the character returned if any
* @return completion code
*/
int SocketBuffer_getQueuedChar(int socket, char* c)
{
int rc = SOCKETBUFFER_INTERRUPTED;
FUNC_ENTRY;
if (ListFindItem(queues, &socket, socketcompare))
{ /* if there is queued data for this socket, read that first */
socket_queue* queue = (socket_queue*)(queues->current->content);
if (queue->index < queue->headerlen)
{
*c = queue->fixed_header[(queue->index)++];
Log(TRACE_MAX, -1, "index is now %d, headerlen %d", queue->index, queue->headerlen);
rc = SOCKETBUFFER_COMPLETE;
goto exit;
}
else if (queue->index > 4)
{
Log(LOG_FATAL, -1, "header is already at full length");
rc = SOCKET_ERROR;
goto exit;
}
}
exit:
FUNC_EXIT_RC(rc);
return rc; /* there was no queued char if rc is SOCKETBUFFER_INTERRUPTED*/
}
开发者ID:CJxD,项目名称:paho.mqtt.c,代码行数:32,代码来源:SocketBuffer.c
示例13: SocketBuffer_queueChar
/**
* A socket operation had now completed so we can get rid of the queue
* @param socket the socket for which the operation is now complete
* @param c the character to queue
*/
void SocketBuffer_queueChar(int socket, char c)
{
int error = 0;
socket_queue* curq = def_queue;
FUNC_ENTRY;
if (ListFindItem(queues, &socket, socketcompare))
curq = (socket_queue*)(queues->current->content);
else if (def_queue->socket == 0)
{
def_queue->socket = socket;
def_queue->index = 0;
def_queue->datalen = 0;
}
else if (def_queue->socket != socket)
{
Log(LOG_FATAL, -1, "attempt to reuse socket queue");
error = 1;
}
if (curq->index > 4)
{
Log(LOG_FATAL, -1, "socket queue fixed_header field full");
error = 1;
}
if (!error)
{
curq->fixed_header[(curq->index)++] = c;
curq->headerlen = curq->index;
}
Log(TRACE_MAX, -1, "queueChar: index is now %d, headerlen %d", curq->index, curq->headerlen);
FUNC_EXIT;
}
开发者ID:CJxD,项目名称:paho.mqtt.c,代码行数:37,代码来源:SocketBuffer.c
示例14: MQTTClient_waitForCompletion
int MQTTClient_waitForCompletion(MQTTClient handle, MQTTClient_deliveryToken mdt, unsigned long timeout)
{
int rc = MQTTCLIENT_FAILURE;
START_TIME_TYPE start = MQTTClient_start_clock();
unsigned long elapsed = 0L;
MQTTClients* m = handle;
FUNC_ENTRY;
Thread_lock_mutex(mqttclient_mutex);
if (m == NULL || m->c == NULL)
{
rc = MQTTCLIENT_FAILURE;
goto exit;
}
if (m->c->connected == 0)
{
rc = MQTTCLIENT_DISCONNECTED;
goto exit;
}
if (ListFindItem(m->c->outboundMsgs, &mdt, messageIDCompare) == NULL)
{
rc = MQTTCLIENT_SUCCESS; /* well we couldn't find it */
goto exit;
}
elapsed = MQTTClient_elapsed(start);
while (elapsed < timeout)
{
Thread_unlock_mutex(mqttclient_mutex);
MQTTClient_yield();
Thread_lock_mutex(mqttclient_mutex);
if (ListFindItem(m->c->outboundMsgs, &mdt, messageIDCompare) == NULL)
{
rc = MQTTCLIENT_SUCCESS; /* well we couldn't find it */
goto exit;
}
elapsed = MQTTClient_elapsed(start);
}
exit:
Thread_unlock_mutex(mqttclient_mutex);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:krattai,项目名称:noo-ebs,代码行数:46,代码来源:MQTTClient.c
示例15: MQTTClient_receive
int MQTTClient_receive(MQTTClient handle, char** topicName, int* topicLen, MQTTClient_message** message,
unsigned long timeout)
{
int rc = TCPSOCKET_COMPLETE;
START_TIME_TYPE start = MQTTClient_start_clock();
unsigned long elapsed = 0L;
MQTTClients* m = handle;
FUNC_ENTRY;
if (m == NULL || m->c == NULL)
{
rc = MQTTCLIENT_FAILURE;
goto exit;
}
if (m->c->connected == 0)
{
rc = MQTTCLIENT_DISCONNECTED;
goto exit;
}
*topicName = NULL;
*message = NULL;
/* if there is already a message waiting, don't hang around but still do some packet handling */
if (m->c->messageQueue->count > 0)
timeout = 0L;
elapsed = MQTTClient_elapsed(start);
do
{
int sock = 0;
MQTTClient_cycle(&sock, (timeout > elapsed) ? timeout - elapsed : 0L, &rc);
if (rc == SOCKET_ERROR)
{
if (ListFindItem(handles, &sock, clientSockCompare) && /* find client corresponding to socket */
(MQTTClient)(handles->current->content) == handle)
break; /* there was an error on the socket we are interested in */
}
elapsed = MQTTClient_elapsed(start);
}
while (elapsed < timeout && m->c->messageQueue->count == 0);
if (m->c->messageQueue->count > 0)
rc = MQTTClient_deliverMessage(rc, m, topicName, topicLen, message);
if (rc == SOCKET_ERROR)
MQTTClient_disconnect_internal(handle, 0);
exit:
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:FlavioFalcao,项目名称:RSSI-Sniffer,代码行数:55,代码来源:MQTTClient.c
示例16: MQTTProtocol_handlePubrecs
/**
* Process an incoming pubrec packet for a socket
* @param pack pointer to the publish packet
* @param sock the socket on which the packet was received
* @return completion code
*/
int MQTTProtocol_handlePubrecs(void* pack, int sock)
{
Pubrec* pubrec = (Pubrec*)pack;
Clients* client = (Clients*)(ListFindItem(bstate->clients, &sock, clientSocketCompare)->content);
int rc = TCPSOCKET_COMPLETE;
FUNC_ENTRY;
Log(LOG_PROTOCOL, 15, NULL, sock, client->clientID, pubrec->msgId);
/* look for the message by message id in the records of outbound messages for this client */
client->outboundMsgs->current = NULL;
if (ListFindItem(client->outboundMsgs, &(pubrec->msgId), messageIDCompare) == NULL)
{
if (pubrec->header.bits.dup == 0)
Log(LOG_WARNING, 50, NULL, "PUBREC", client->clientID, pubrec->msgId);
}
else
{
Messages* m = (Messages*)(client->outboundMsgs->current->content);
if (m->qos != 2)
{
if (pubrec->header.bits.dup == 0)
Log(LOG_WARNING, 51, NULL, "PUBREC", client->clientID, pubrec->msgId, m->qos);
}
else if (m->nextMessageType != PUBREC)
{
if (pubrec->header.bits.dup == 0)
Log(LOG_WARNING, 52, NULL, "PUBREC", client->clientID, pubrec->msgId);
}
else
{
rc = MQTTPacket_send_pubrel(pubrec->msgId, 0, sock, client->clientID);
m->nextMessageType = PUBCOMP;
time(&(m->lastTouch));
if (rc == TCPSOCKET_COMPLETE && client->outbound)
client->lastContact = m->lastTouch;
}
}
free(pack);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:Frank-KunLi,项目名称:rsmb,代码行数:48,代码来源:MQTTProtocolClient.c
示例17: MQTTProtocol_assignMsgId
/**
* Assign a new message id for a client. Make sure it isn't already being used and does
* not exceed the maximum.
* @param client a client structure
* @return the next message id to use
*/
int MQTTProtocol_assignMsgId(Clients* client)
{
FUNC_ENTRY;
++(client->msgID);
while (ListFindItem(client->outboundMsgs, &(client->msgID), messageIDCompare) != NULL)
++(client->msgID);
if (client->msgID == MAX_MSG_ID)
client->msgID = 1;
FUNC_EXIT_RC(client->msgID);
return client->msgID;
}
开发者ID:bluerover,项目名称:rsmb,代码行数:17,代码来源:MQTTProtocolClient.c
示例18: SocketBuffer_cleanup
void SocketBuffer_cleanup(int socket)
{
FUNC_ENTRY;
if (ListFindItem(queues, &socket, socketcompare))
{
free(((socket_queue*)(queues->current->content))->buf);
ListRemove(queues, queues->current->content);
}
if (def_queue->socket == socket)
def_queue->socket = def_queue->index = def_queue->headerlen = def_queue->datalen = 0;
FUNC_EXIT;
}
开发者ID:wgels,项目名称:apple-sdk,代码行数:12,代码来源:SocketBuffer.c
示例19: isReady
/**
* Don't accept work from a client unless it is accepting work back, i.e. its socket is writeable
* this seems like a reasonable form of flow control, and practically, seems to work.
* @param socket the socket to check
* @param read_set the socket read set (see select doc)
* @param write_set the socket write set (see select doc)
* @return boolean - is the socket ready to go?
*/
int isReady(int socket, fd_set* read_set, fd_set* write_set)
{
int rc = 1;
FUNC_ENTRY;
if (ListFindItem(s.connect_pending, &socket, intcompare) && FD_ISSET(socket, write_set))
ListRemoveItem(s.connect_pending, &socket, intcompare);
else
rc = FD_ISSET(socket, read_set) && FD_ISSET(socket, write_set) && Socket_noPendingWrites(socket);
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:shotantan,项目名称:mruby-mqtt,代码行数:20,代码来源:Socket.c
示例20: MQTTProtocol_handlePingresps
/**
* Process an incoming pingresp packet for a socket
* @param pack pointer to the publish packet
* @param sock the socket on which the packet was received
* @return completion code
*/
int MQTTProtocol_handlePingresps(void* pack, int sock)
{
Clients* client = NULL;
int rc = TCPSOCKET_COMPLETE;
FUNC_ENTRY;
client = (Clients*)(ListFindItem(bstate->clients, &sock, clientSocketCompare)->content);
Log(LOG_PROTOCOL, 21, NULL, sock, client->clientID);
client->ping_outstanding = 0;
FUNC_EXIT_RC(rc);
return rc;
}
开发者ID:EricOcasio,项目名称:paho.mqtt.c,代码行数:18,代码来源:MQTTProtocolOut.c
注:本文中的ListFindItem函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论