C++ LibVarGetValue函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LibVarGetValue函数的典型用法代码示例。如果您正苦于以下问题：C++ LibVarGetValue函数的具体用法？C++ LibVarGetValue怎么用？C++ LibVarGetValue使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LibVarGetValue函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: AAS_ContinueInit

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
void AAS_ContinueInit(float time)
{
	//if no AAS file loaded
	if (!aasworld.loaded) return;
	//if AAS is already initialized
	if (aasworld.initialized) return;
	//calculate reachability, if not finished return
	if (AAS_ContinueInitReachability(time)) return;
	//initialize clustering for the new map
	AAS_InitClustering();
	//if reachability has been calculated and an AAS file should be written
	//or there is a forced data optimization
	if (aasworld.savefile || ((int)LibVarGetValue("forcewrite")))
	{
		//optimize the AAS data
		if ((int)LibVarValue("aasoptimize", "0")) AAS_Optimize();
		//save the AAS file
		if (AAS_WriteAASFile(aasworld.filename))
		{
			botimport.Print(PRT_MESSAGE, "%s written succesfully\n", aasworld.filename);
		} //end if
		else
		{
			botimport.Print(PRT_ERROR, "couldn't write %s\n", aasworld.filename);
		} //end else
	} //end if
	//initialize the routing
	AAS_InitRouting();
	//at this point AAS is initialized
	AAS_SetInitialized();
} //end of the function AAS_ContinueInit

开发者ID:kingtiger01，项目名称:OpenMOHAA，代码行数:37，代码来源:be_aas_main.c

示例2: Export_BotLibSetup

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
int Export_BotLibSetup(void)
{
	int		errnum;
	
	bot_developer = LibVarGetValue("bot_developer");
  memset( &botlibglobals, 0, sizeof(botlibglobals) ); // bk001207 - init
	//initialize byte swapping (litte endian etc.)
//	Swap_Init();
	Log_Open("botlib.log");
	//
	botimport.Print(PRT_MESSAGE, "------- BotLib Initialization -------\n");
	//
	botlibglobals.maxclients = (int) LibVarValue("maxclients", "128");
	botlibglobals.maxentities = (int) LibVarValue("maxentities", "1024");

	errnum = AAS_Setup();			//be_aas_main.c
	if (errnum != BLERR_NOERROR) return errnum;
	errnum = EA_Setup();			//be_ea.c
	if (errnum != BLERR_NOERROR) return errnum;
	/*
	errnum = BotSetupWeaponAI();	//be_ai_weap.c
	if (errnum != BLERR_NOERROR)return errnum;
	errnum = BotSetupGoalAI();		//be_ai_goal.c
	if (errnum != BLERR_NOERROR) return errnum;
	errnum = BotSetupChatAI();		//be_ai_chat.c
	if (errnum != BLERR_NOERROR) return errnum;
	errnum = BotSetupMoveAI();		//be_ai_move.c
	if (errnum != BLERR_NOERROR) return errnum;
	*/
	botlibsetup = qtrue;
	botlibglobals.botlibsetup = qtrue;

	return BLERR_NOERROR;
} //end of the function Export_BotLibSetup

开发者ID:5Quintessential，项目名称:jedioutcast，代码行数:40，代码来源:be_interface.cpp

示例3: FreeWeightConfig

//===========================================================================
//
// Parameter:           -
// Returns:             -
// Changes Globals:     -
//===========================================================================
void FreeWeightConfig(weightconfig_t * config)
{
	if(!LibVarGetValue("bot_reloadcharacters"))
	{
		return;
	}
	FreeWeightConfig2(config);
}								//end of the function FreeWeightConfig

开发者ID:TheDushan，项目名称:OpenWolf，代码行数:14，代码来源:be_ai_weight.cpp

示例4: BotFreeCharacter

// Parameter:			 - 
// Returns:				 - 
// Changes Globals:		 - 
// ========================================================================
void BotFreeCharacter(int handle) {

	if (!LibVarGetValue("bot_reloadcharacters")) {
		return;
	}

	BotFreeCharacter2(handle);
} // end of the function BotFreeCharacter

开发者ID:ioid3-games，项目名称:ioid3-rtcw，代码行数:12，代码来源:be_ai_char.c

示例5: Export_BotLibSetup

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
int Export_BotLibSetup(void)
{
	int		errnum;

	botDeveloper = LibVarGetValue("bot_developer");
  memset( &botlibglobals, 0, sizeof(botlibglobals) ); // bk001207 - init
	//initialize byte swapping (litte endian etc.)
//	Swap_Init();

	if(botDeveloper)
	{
		char const * homedir, * gamedir, * basedir;
		char logfilename[MAX_OSPATH];

		homedir = LibVarGetString("homedir");
		gamedir = LibVarGetString("gamedir");
		basedir = LibVarGetString("com_basegame");

		if (*homedir)
		{
			if(*gamedir)
				Com_sprintf(logfilename, sizeof(logfilename), "%s%c%s%cbotlib.log", homedir, PATH_SEP, gamedir, PATH_SEP);
			else if(*basedir)
				Com_sprintf(logfilename, sizeof(logfilename), "%s%c%s%cbotlib.log", homedir, PATH_SEP, basedir, PATH_SEP);
			else
				Com_sprintf(logfilename, sizeof(logfilename), "%s%c" "base" "%cbotlib.log", homedir, PATH_SEP, PATH_SEP); //fixme use BASEGAME define
		}
		else
			Com_sprintf(logfilename, sizeof(logfilename), "botlib.log");

		Log_Open(logfilename);
	}
	//
//	botimport.Print(PRT_MESSAGE, "------- BotLib Initialization -------\n");
	//
	botlibglobals.maxclients = (int) LibVarValue("maxclients", "128");
	botlibglobals.maxentities = (int) LibVarValue("maxentities", "1024");

	errnum = AAS_Setup();			//be_aas_main.c
	if (errnum != BLERR_NOERROR) return errnum;
	errnum = EA_Setup();			//be_ea.c
	if (errnum != BLERR_NOERROR) return errnum;
	/*
	errnum = BotSetupWeaponAI();	//be_ai_weap.c
	if (errnum != BLERR_NOERROR)return errnum;
	errnum = BotSetupGoalAI();		//be_ai_goal.c
	if (errnum != BLERR_NOERROR) return errnum;
	errnum = BotSetupChatAI();		//be_ai_chat.c
	if (errnum != BLERR_NOERROR) return errnum;
	errnum = BotSetupMoveAI();		//be_ai_move.c
	if (errnum != BLERR_NOERROR) return errnum;
	*/
	botlibsetup = qtrue;
	botlibglobals.botlibsetup = qtrue;

	return BLERR_NOERROR;
} //end of the function Export_BotLibSetup

开发者ID:cagelight，项目名称:jaownt，代码行数:63，代码来源:be_interface.cpp

示例6: BotLoadCharacterSkill

//===========================================================================
//
// Parameter:			-
// Returns:				-
// Changes Globals:		-
//===========================================================================
int BotLoadCharacterSkill( char *charfile, int skill ) {
	int ch, defaultch;

	defaultch = BotLoadCachedCharacter( DEFAULT_CHARACTER, skill, qfalse );
	ch = BotLoadCachedCharacter( charfile, skill, LibVarGetValue( "bot_reloadcharacters" ) );

	if ( defaultch && ch ) {
		BotDefaultCharacteristics( botcharacters[ch], botcharacters[defaultch] );
	} //end if

	return ch;
} //end of the function BotLoadCharacterSkill

开发者ID:Justasic，项目名称:RTCW-MP，代码行数:18，代码来源:be_ai_char.c

示例7: AAS_StartFrame

//===========================================================================
// called at the start of every frame
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
int AAS_StartFrame(float time)
{
	aasworld.time = time;
	//unlink all entities that were not updated last frame
	AAS_UnlinkInvalidEntities();
	//invalidate the entities
	AAS_InvalidateEntities();
	//initialize AAS
	AAS_ContinueInit(time);
	//
	aasworld.frameroutingupdates = 0;
	//
	if (bot_developer)
	{
		if (LibVarGetValue("showcacheupdates"))
		{
			AAS_RoutingInfo();
			LibVarSet("showcacheupdates", "0");
		} //end if
		if (LibVarGetValue("showmemoryusage"))
		{
			PrintUsedMemorySize();
			LibVarSet("showmemoryusage", "0");
		} //end if
		if (LibVarGetValue("memorydump"))
		{
			PrintMemoryLabels();
			LibVarSet("memorydump", "0");
		} //end if
	} //end if
	//
	if (saveroutingcache->value)
	{
		AAS_WriteRouteCache();
		LibVarSet("saveroutingcache", "0");
	} //end if
	//
	aasworld.numframes++;
	return BLERR_NOERROR;
} //end of the function AAS_StartFrame

开发者ID:kingtiger01，项目名称:OpenMOHAA，代码行数:47，代码来源:be_aas_main.c

示例8: BotLibSetup

int BotLibSetup( bool singleplayer ) {
	bot_developer = LibVarGetValue( "bot_developer" );
	Com_Memset( &botlibglobals, 0, sizeof ( botlibglobals ) );
	Log_Open( "botlib.log" );

	BotImport_Print( PRT_MESSAGE, "------- BotLib Initialization -------\n" );

	botlibglobals.maxclients = ( int )LibVarValue( "maxclients", "128" );
	botlibglobals.maxentities = ( int )LibVarValue( "maxentities", GGameType & GAME_WolfSP ? "2048" : "1024" );

	int errnum = AAS_Setup();			//be_aas_main.c
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}
	errnum = EA_Setup();			//be_ea.c
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}
	if ( !( GGameType & ( GAME_WolfSP | GAME_WolfMP ) ) ) {
		errnum = BotSetupWeaponAI();	//be_ai_weap.c
		if ( errnum != BLERR_NOERROR ) {
			return errnum;
		}
		errnum = BotSetupGoalAI( singleplayer );		//be_ai_goal.c
		if ( errnum != BLERR_NOERROR ) {
			return errnum;
		}
		errnum = BotSetupChatAI();		//be_ai_chat.c
		if ( errnum != BLERR_NOERROR ) {
			return errnum;
		}
	}
	if ( !( GGameType & GAME_WolfMP ) ) {
		errnum = BotSetupMoveAI();		//be_ai_move.c
		if ( errnum != BLERR_NOERROR ) {
			return errnum;
		}
	}

	if ( GGameType & GAME_ET ) {
		PC_RemoveAllGlobalDefines();
	}

	botlibsetup = true;
	botlibglobals.botlibsetup = true;

	return BLERR_NOERROR;
}

开发者ID:janisl，项目名称:jlquake，代码行数:48，代码来源:interface.cpp

示例9: Sys_MilliSeconds

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
weightconfig_t *ReadWeightConfig( char *filename ) {
	int newindent, avail = 0, n;
	token_t token;
	source_t *source;
	fuzzyseperator_t *fs;
	weightconfig_t *config = NULL;
#ifdef DEBUG
	int starttime;

	starttime = Sys_MilliSeconds();
#endif //DEBUG

	if ( !LibVarGetValue( "bot_reloadcharacters" ) ) {
		avail = -1;
		for ( n = 0; n < MAX_WEIGHT_FILES; n++ )
		{
			config = weightFileList[n];
			if ( !config ) {
				if ( avail == -1 ) {
					avail = n;
				} //end if
				continue;
			} //end if
			if ( strcmp( filename, config->filename ) == 0 ) {
				//botimport.Print( PRT_MESSAGE, "retained %s\n", filename );
				return config;
			} //end if
		} //end for

		if ( avail == -1 ) {
			botimport.Print( PRT_ERROR, "weightFileList was full trying to load %s\n", filename );
			return NULL;
		} //end if
	} //end if

	source = LoadSourceFile( filename );
	if ( !source ) {
		botimport.Print( PRT_ERROR, "counldn't load %s\n", filename );
		return NULL;
	} //end if
	  //
	config = (weightconfig_t *) GetClearedMemory( sizeof( weightconfig_t ) );
	config->numweights = 0;
	Q_strncpyz( config->filename, filename, sizeof( config->filename ) );
	//parse the item config file
	while ( PC_ReadToken( source, &token ) )
	{
		if ( !strcmp( token.string, "weight" ) ) {
			if ( config->numweights >= MAX_WEIGHTS ) {
				SourceWarning( source, "too many fuzzy weights" );
				break;
			} //end if
			if ( !PC_ExpectTokenType( source, TT_STRING, 0, &token ) ) {
				FreeWeightConfig( config );
				FreeSource( source );
				return NULL;
			} //end if
			StripDoubleQuotes( token.string );
			config->weights[config->numweights].name = (char *) GetClearedMemory( strlen( token.string ) + 1 );
			strcpy( config->weights[config->numweights].name, token.string );
			if ( !PC_ExpectAnyToken( source, &token ) ) {
				FreeWeightConfig( config );
				FreeSource( source );
				return NULL;
			} //end if
			newindent = qfalse;
			if ( !strcmp( token.string, "{" ) ) {
				newindent = qtrue;
				if ( !PC_ExpectAnyToken( source, &token ) ) {
					FreeWeightConfig( config );
					FreeSource( source );
					return NULL;
				} //end if
			} //end if
			if ( !strcmp( token.string, "switch" ) ) {
				fs = ReadFuzzySeperators_r( source );
				if ( !fs ) {
					FreeWeightConfig( config );
					FreeSource( source );
					return NULL;
				} //end if
				config->weights[config->numweights].firstseperator = fs;
			} //end if
			else if ( !strcmp( token.string, "return" ) ) {
				fs = (fuzzyseperator_t *) GetClearedMemory( sizeof( fuzzyseperator_t ) );
				fs->index = 0;
				fs->value = MAX_INVENTORYVALUE;
				fs->next = NULL;
				fs->child = NULL;
				if ( !ReadFuzzyWeight( source, fs ) ) {
					FreeMemory( fs );
					FreeWeightConfig( config );
					FreeSource( source );
					return NULL;
//.........这里部分代码省略.........

开发者ID:MAN-AT-ARMS，项目名称:iortcw-archive，代码行数:101，代码来源:be_ai_weight.c

示例10: BotExportTest

int BotExportTest( int parm0, char *parm1, vec3_t parm2, vec3_t parm3 ) {

#if !defined RTCW_ET
//	return AAS_PointLight(parm2, NULL, NULL, NULL);

#ifdef DEBUG
	static int area = -1;
	static int line[2];

#if defined RTCW_SP
	int newarea, i, highlightarea, bot_testhidepos, hideposarea, bot_testroutevispos;
#elif defined RTCW_MP
	int newarea, i, highlightarea, bot_testhidepos, hideposarea;
#endif // RTCW_XX

//	int reachnum;
	vec3_t eye, forward, right, end, origin;
//	vec3_t bottomcenter;
//	aas_trace_t trace;
//	aas_face_t *face;
//	aas_entity_t *ent;
//	bsp_trace_t bsptrace;
//	aas_reachability_t reach;
//	bot_goal_t goal;

//	clock_t start_time, end_time;
	vec3_t mins = {-16, -16, -24};
	vec3_t maxs = {16, 16, 32};
//	int areas[10], numareas;


	//return 0;

	if ( !( *aasworld ).loaded ) {
		return 0;
	}
	AAS_SetCurrentWorld( 0 );

	for ( i = 0; i < 2; i++ ) if ( !line[i] ) {
			line[i] = botimport.DebugLineCreate();
		}

//	AAS_ClearShownDebugLines();
	bot_testhidepos = LibVarGetValue( "bot_testhidepos" );
	if ( bot_testhidepos ) {
		VectorCopy( parm2, origin );
		newarea = BotFuzzyPointReachabilityArea( origin );
		if ( parm0 & 1 ) {
			botlibglobals.goalareanum = newarea;
			VectorCopy( origin, botlibglobals.goalorigin );
			botimport.Print( PRT_MESSAGE, "new enemy position %2.1f %2.1f %2.1f area %d\n",
							 origin[0], origin[1], origin[2], newarea );
		} //end if
		AAS_ClearShownPolygons();
		AAS_ClearShownDebugLines();

#if defined RTCW_SP
		hideposarea = AAS_NearestHideArea( -1, origin, AAS_PointAreaNum( origin ), 0,
#elif defined RTCW_MP
		hideposarea = AAS_NearestHideArea( 0, origin, AAS_PointAreaNum( origin ), 0,
#endif // RTCW_XX

										   botlibglobals.goalorigin, botlibglobals.goalareanum, TFL_DEFAULT );

#if defined RTCW_SP
		if ( bot_testhidepos > 1 ) {
			if ( hideposarea ) {
				botimport.Print( PRT_MESSAGE, "hidepos (%i) %2.1f %2.1f %2.1f\n",
								 hideposarea,
								 ( *aasworld ).areawaypoints[hideposarea][0],
								 ( *aasworld ).areawaypoints[hideposarea][1],
								 ( *aasworld ).areawaypoints[hideposarea][2] );
			} else {
				botimport.Print( PRT_MESSAGE, "no hidepos found\n" );
			}
		}
#endif // RTCW_XX

		//area we are currently in
		AAS_ShowAreaPolygons( newarea, 1, qtrue );
		//enemy position
		AAS_ShowAreaPolygons( botlibglobals.goalareanum, 2, qtrue );
		//area we should go hide
		AAS_ShowAreaPolygons( hideposarea, 4, qtrue );
		return 0;
	}

#if defined RTCW_SP
	bot_testroutevispos = LibVarGetValue( "bot_testroutevispos" );
	if ( bot_testroutevispos ) {
		VectorCopy( parm2, origin );
		newarea = BotFuzzyPointReachabilityArea( origin );
		if ( parm0 & 1 ) {
			botlibglobals.goalareanum = newarea;
			VectorCopy( origin, botlibglobals.goalorigin );
			botimport.Print( PRT_MESSAGE, "new enemy position %2.1f %2.1f %2.1f area %d\n",
							 origin[0], origin[1], origin[2], newarea );
		} //end if
		AAS_ClearShownPolygons();
		AAS_ClearShownDebugLines();
//.........这里部分代码省略.........

开发者ID:bibendovsky，项目名称:rtcw，代码行数:101，代码来源:be_interface.cpp

示例11: Export_BotLibSetup

int Export_BotLibSetup( void ) {
#else
int Export_BotLibSetup( qboolean singleplayer ) {
#endif // RTCW_XX

	int errnum;

	bot_developer = LibVarGetValue( "bot_developer" );

    //BBi
	////initialize byte swapping (litte endian etc.)
	//Swap_Init();
    //BBi

	Log_Open( "botlib.log" );
	//
	botimport.Print( PRT_MESSAGE, "------- BotLib Initialization -------\n" );
	//
	botlibglobals.maxclients = (int) LibVarValue( "maxclients", "128" );

#if defined RTCW_SP
	botlibglobals.maxentities = (int) LibVarValue( "maxentities", "2048" );
#else
	botlibglobals.maxentities = (int) LibVarValue( "maxentities", "1024" );
#endif // RTCW_XX

	errnum = AAS_Setup();           //be_aas_main.c
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}
	errnum = EA_Setup();            //be_ea.c
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}

#if !defined RTCW_ET
//	errnum = BotSetupWeaponAI();	//be_ai_weap.c
//	if (errnum != BLERR_NOERROR)return errnum;
//	errnum = BotSetupGoalAI();		//be_ai_goal.c
//	if (errnum != BLERR_NOERROR) return errnum;
//	errnum = BotSetupChatAI();		//be_ai_chat.c
//	if (errnum != BLERR_NOERROR) return errnum;
#else
	errnum = BotSetupWeaponAI();    //be_ai_weap.c
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}
// START	Arnout changes, 28-08-2002.
// added single player
	errnum = BotSetupGoalAI( singleplayer );      //be_ai_goal.c
// END	Arnout changes, 28-08-2002.
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}
	errnum = BotSetupChatAI();      //be_ai_chat.c
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}
#endif // RTCW_XX

#if defined RTCW_MP
//	errnum = BotSetupMoveAI();		//be_ai_move.c
//	if (errnum != BLERR_NOERROR) return errnum;
#endif // RTCW_XX

#if !defined RTCW_MP
	errnum = BotSetupMoveAI();      //be_ai_move.c
	if ( errnum != BLERR_NOERROR ) {
		return errnum;
	}
#endif // RTCW_XX

#if defined RTCW_ET
	globaldefines = NULL;
#endif // RTCW_XX


	botlibsetup = qtrue;
	botlibglobals.botlibsetup = qtrue;

	return BLERR_NOERROR;
} //end of the function Export_BotLibSetup

开发者ID:bibendovsky，项目名称:rtcw，代码行数:82，代码来源:be_interface.cpp

示例12: AAS_InitClustering

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
void AAS_InitClustering(void)
{
	int i, removedPortalAreas;
	int n, total, numreachabilityareas;

	if (!aasworld.loaded) return;
	//if there are clusters
	if (aasworld.numclusters >= 1)
	{
#ifndef BSPC
		//if clustering isn't forced
		if (!((int)LibVarGetValue("forceclustering")) &&
			!((int)LibVarGetValue("forcereachability"))) return;
#endif
	} //end if
	//set all view portals as cluster portals in case we re-calculate the reachabilities and clusters (with -reach)
	AAS_SetViewPortalsAsClusterPortals();
	//count the number of forced cluster portals
	AAS_CountForcedClusterPortals();
	//remove all area cluster marks
	AAS_RemoveClusterAreas();
	//find possible cluster portals
	AAS_FindPossiblePortals();
	//craete portals to for the bot view
	AAS_CreateViewPortals();
	//remove all portals that are not closing a cluster
	//AAS_RemoveNotClusterClosingPortals();
	//initialize portal memory
	if (aasworld.portals) FreeMemory(aasworld.portals);
	aasworld.portals = (aas_portal_t *) GetClearedMemory(AAS_MAX_PORTALS * sizeof(aas_portal_t));
	//initialize portal index memory
	if (aasworld.portalindex) FreeMemory(aasworld.portalindex);
	aasworld.portalindex = (aas_portalindex_t *) GetClearedMemory(AAS_MAX_PORTALINDEXSIZE * sizeof(aas_portalindex_t));
	//initialize cluster memory
	if (aasworld.clusters) FreeMemory(aasworld.clusters);
	aasworld.clusters = (aas_cluster_t *) GetClearedMemory(AAS_MAX_CLUSTERS * sizeof(aas_cluster_t));
	//
	removedPortalAreas = 0;
	botimport.Print(PRT_MESSAGE, "\r%6d removed portal areas", removedPortalAreas);
	while(1)
	{
		botimport.Print(PRT_MESSAGE, "\r%6d", removedPortalAreas);
		//initialize the number of portals and clusters
		aasworld.numportals = 1;		//portal 0 is a dummy
		aasworld.portalindexsize = 0;
		aasworld.numclusters = 1;		//cluster 0 is a dummy
		//create the portals from the portal areas
		AAS_CreatePortals();
		//
		removedPortalAreas++;
		//find the clusters
		if (!AAS_FindClusters())
			continue;
		//test the portals
		if (!AAS_TestPortals())
			continue;
		//
		break;
	} //end while
	botimport.Print(PRT_MESSAGE, "\n");
	//the AAS file should be saved
	aasworld.savefile = qtrue;
	//write the portal areas to the log file
	for (i = 1; i < aasworld.numportals; i++)
	{
		Log_Write("portal %d: area %d\r\n", i, aasworld.portals[i].areanum);
	} //end for
	// report cluster info
	botimport.Print(PRT_MESSAGE, "%6d portals created\n", aasworld.numportals);
	botimport.Print(PRT_MESSAGE, "%6d clusters created\n", aasworld.numclusters);
	for (i = 1; i < aasworld.numclusters; i++)
	{
		botimport.Print(PRT_MESSAGE, "cluster %d has %d reachability areas\n", i,
				aasworld.clusters[i].numreachabilityareas);
	} //end for
	// report AAS file efficiency
	numreachabilityareas = 0;
	total = 0;
	for (i = 0; i < aasworld.numclusters; i++) {
		n = aasworld.clusters[i].numreachabilityareas;
		numreachabilityareas += n;
		total += n * n;
	}
	total += numreachabilityareas * aasworld.numportals;
	//
	botimport.Print(PRT_MESSAGE, "%6i total reachability areas\n", numreachabilityareas);
	botimport.Print(PRT_MESSAGE, "%6i AAS memory/CPU usage (the lower the better)\n", total * 3);
} //end of the function AAS_InitClustering

开发者ID:OADoctor，项目名称:SmokinGuns，代码行数:94，代码来源:be_aas_cluster.c

示例13: BotExportTest

int BotExportTest(int parm0, char *parm1, vec3_t parm2, vec3_t parm3)
{

//	return AAS_PointLight(parm2, NULL, NULL, NULL);

#ifdef DEBUG
	static int area = -1;
	static int line[2];
	int newarea, i, highlightarea, flood;
//	int reachnum;
	vec3_t eye, forward, right, end, origin;
//	vec3_t bottomcenter;
//	aas_trace_t trace;
//	aas_face_t *face;
//	aas_entity_t *ent;
//	bsp_trace_t bsptrace;
//	aas_reachability_t reach;
//	bot_goal_t goal;

	// clock_t start_time, end_time;
	vec3_t mins = {-16, -16, -24};
	vec3_t maxs = {16, 16, 32};

//	int areas[10], numareas;


	//return 0;

	if (!aasworld.loaded) return 0;

	/*
	if (parm0 & 1)
	{
		AAS_ClearShownPolygons();
		AAS_FloodAreas(parm2);
	} //end if
	return 0;
	*/
	for (i = 0; i < 2; i++) if (!line[i]) line[i] = botimport.DebugLineCreate();

//	AAS_ClearShownDebugLines();

	//if (AAS_AgainstLadder(parm2)) botimport.Print(PRT_MESSAGE, "against ladder\n");
	//BotOnGround(parm2, PRESENCE_NORMAL, 1, &newarea, &newarea);
	//botimport.Print(PRT_MESSAGE, "%f %f %f\n", parm2[0], parm2[1], parm2[2]);
	//*
	highlightarea = LibVarGetValue("bot_highlightarea");
	if (highlightarea > 0)
	{
		newarea = highlightarea;
	} //end if
	else
	{
		VectorCopy(parm2, origin);
		origin[2] += 0.5;
		//newarea = AAS_PointAreaNum(origin);
		newarea = BotFuzzyPointReachabilityArea(origin);
	} //end else

	botimport.Print(PRT_MESSAGE, "\rtravel time to goal (%d) = %d  ", botlibglobals.goalareanum,
		AAS_AreaTravelTimeToGoalArea(newarea, origin, botlibglobals.goalareanum, TFL_DEFAULT));
	//newarea = BotReachabilityArea(origin, qtrue);
	if (newarea != area)
	{
		botimport.Print(PRT_MESSAGE, "origin = %f, %f, %f\n", origin[0], origin[1], origin[2]);
		area = newarea;
		botimport.Print(PRT_MESSAGE, "new area %d, cluster %d, presence type %d\n",
					area, AAS_AreaCluster(area), AAS_PointPresenceType(origin));
		botimport.Print(PRT_MESSAGE, "area contents: ");
		if (aasworld.areasettings[area].contents & AREACONTENTS_WATER)
		{
			botimport.Print(PRT_MESSAGE, "water &");
		} //end if
		if (aasworld.areasettings[area].contents & AREACONTENTS_LAVA)
		{
			botimport.Print(PRT_MESSAGE, "lava &");
		} //end if
		if (aasworld.areasettings[area].contents & AREACONTENTS_SLIME)
		{
			botimport.Print(PRT_MESSAGE, "slime &");
		} //end if
		if (aasworld.areasettings[area].contents & AREACONTENTS_JUMPPAD)
		{
			botimport.Print(PRT_MESSAGE, "jump pad &");
		} //end if
		if (aasworld.areasettings[area].contents & AREACONTENTS_CLUSTERPORTAL)
		{
			botimport.Print(PRT_MESSAGE, "cluster portal &");
		} //end if
		if (aasworld.areasettings[area].contents & AREACONTENTS_VIEWPORTAL)
		{
			botimport.Print(PRT_MESSAGE, "view portal &");
		} //end if
		if (aasworld.areasettings[area].contents & AREACONTENTS_DONOTENTER)
		{
			botimport.Print(PRT_MESSAGE, "do not enter &");
		} //end if
		if (aasworld.areasettings[area].contents & AREACONTENTS_MOVER)
		{
			botimport.Print(PRT_MESSAGE, "mover &");
//.........这里部分代码省略.........

开发者ID:Fighter19，项目名称:Quake3PSP-mirror，代码行数:101，代码来源:be_interface.c

示例14: BotFreeCharacter

void
BotFreeCharacter(int handle)
{
	if(!LibVarGetValue("bot_reloadcharacters")) return;
	BotFreeCharacter2(handle);
}

开发者ID:icanhas，项目名称:yantar，代码行数:6，代码来源:be_ai_char.c

注：本文中的LibVarGetValue函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LiceColor函数代码示例发布时间：2022-05-30

C++ LibAmdPciWrite函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19237|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9671|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8668|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ LibVarGetValue函数代码示例

示例1: AAS_ContinueInit

示例2: Export_BotLibSetup

示例3: FreeWeightConfig

示例4: BotFreeCharacter

示例5: Export_BotLibSetup

示例6: BotLoadCharacterSkill

示例7: AAS_StartFrame

示例8: BotLibSetup

示例9: Sys_MilliSeconds

示例10: BotExportTest

示例11: Export_BotLibSetup

示例12: AAS_InitClustering

示例13: BotExportTest

示例14: BotFreeCharacter

请发表评论

全部评论

上一篇：

下一篇：

solegalli/feature-selection-for-machine-

tianli/matlab_offscreen: Matlab offscree

win7系统重装系统初始设置的操作方法

これがマストドンだ！使い方からインスタ

CVE-2022-34216

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

客服电话

电子邮件

C++ LibVarGetValue函数代码示例

示例1: AAS_ContinueInit

示例2: Export_BotLibSetup

示例3: FreeWeightConfig

示例4: BotFreeCharacter

示例5: Export_BotLibSetup

示例6: BotLoadCharacterSkill

示例7: AAS_StartFrame

示例8: BotLibSetup

示例9: Sys_MilliSeconds

示例10: BotExportTest

示例11: Export_BotLibSetup

示例12: AAS_InitClustering

示例13: BotExportTest

示例14: BotFreeCharacter

请发表评论

全部评论

上一篇：

下一篇：

solegalli/feature-selection-for-machine-

tianli/matlab_offscreen: Matlab offscree

win7系统重装系统初始设置的操作方法

これがマストドンだ！ 使い方からインスタ

CVE-2022-34216

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ