• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ LWIP_MEM_ALIGN_SIZE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中LWIP_MEM_ALIGN_SIZE函数的典型用法代码示例。如果您正苦于以下问题:C++ LWIP_MEM_ALIGN_SIZE函数的具体用法?C++ LWIP_MEM_ALIGN_SIZE怎么用?C++ LWIP_MEM_ALIGN_SIZE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了LWIP_MEM_ALIGN_SIZE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mem_malloc

/**
 * Allocate memory: determine the smallest pool that is big enough
 * to contain an element of 'size' and get an element from that pool.
 *
 * @param size the size in bytes of the memory needed
 * @return a pointer to the allocated memory or NULL if the pool is empty
 */
void *
mem_malloc(mem_size_t size)
{
  void *ret;
  struct memp_malloc_helper *element;
  memp_t poolnr;
  mem_size_t required_size = size + LWIP_MEM_ALIGN_SIZE(sizeof(struct memp_malloc_helper));

  for (poolnr = MEMP_POOL_FIRST; poolnr <= MEMP_POOL_LAST; poolnr = (memp_t)(poolnr + 1)) {
#if MEM_USE_POOLS_TRY_BIGGER_POOL
again:
#endif /* MEM_USE_POOLS_TRY_BIGGER_POOL */
    /* is this pool big enough to hold an element of the required size
       plus a struct memp_malloc_helper that saves the pool this element came from? */
    if (required_size <= memp_pools[poolnr]->size) {
      break;
    }
  }
  if (poolnr > MEMP_POOL_LAST) {
    LWIP_ASSERT("mem_malloc(): no pool is that big!", 0);
    MEM_STATS_INC(err);
    return NULL;
  }
  element = (struct memp_malloc_helper*)memp_malloc(poolnr);
  if (element == NULL) {
    /* No need to DEBUGF or ASSERT: This error is already
       taken care of in memp.c */
#if MEM_USE_POOLS_TRY_BIGGER_POOL
    /** Try a bigger pool if this one is empty! */
    if (poolnr < MEMP_POOL_LAST) {
      poolnr++;
      goto again;
    }
#endif /* MEM_USE_POOLS_TRY_BIGGER_POOL */
    MEM_STATS_INC(err);
    return NULL;
  }

  /* save the pool number this element came from */
  element->poolnr = poolnr;
  /* and return a pointer to the memory directly after the struct memp_malloc_helper */
  ret = (u8_t*)element + LWIP_MEM_ALIGN_SIZE(sizeof(struct memp_malloc_helper));

#if MEMP_OVERFLOW_CHECK || (LWIP_STATS && MEM_STATS)
  /* truncating to u16_t is safe because struct memp_desc::size is u16_t */
  element->size = (u16_t)size;
  MEM_STATS_INC_USED(used, element->size);
#endif /* MEMP_OVERFLOW_CHECK || (LWIP_STATS && MEM_STATS) */
#if MEMP_OVERFLOW_CHECK
  /* initialize unused memory (diff between requested size and selected pool's size) */
  memset((u8_t*)ret + size, 0xcd, memp_pools[poolnr]->size - size);
#endif /* MEMP_OVERFLOW_CHECK */
  return ret;
}
开发者ID:SolarTeamEindhoven,项目名称:mbed,代码行数:61,代码来源:lwip_mem.c


示例2: pbuf_alloced_custom

/**
 * @ingroup pbuf
 * Initialize a custom pbuf (already allocated).
 *
 * @param l flag to define header size
 * @param length size of the pbuf's payload
 * @param type type of the pbuf (only used to treat the pbuf accordingly, as
 *        this function allocates no memory)
 * @param p pointer to the custom pbuf to initialize (already allocated)
 * @param payload_mem pointer to the buffer that is used for payload and headers,
 *        must be at least big enough to hold 'length' plus the header size,
 *        may be NULL if set later.
 *        ATTENTION: The caller is responsible for correct alignment of this buffer!!
 * @param payload_mem_len the size of the 'payload_mem' buffer, must be at least
 *        big enough to hold 'length' plus the header size
 */
struct pbuf*
pbuf_alloced_custom(pbuf_layer l, u16_t length, pbuf_type type, struct pbuf_custom *p,
                    void *payload_mem, u16_t payload_mem_len)
{
  u16_t offset;
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloced_custom(length=%"U16_F")\n", length));

  /* determine header offset */
  switch (l) {
  case PBUF_TRANSPORT:
    /* add room for transport (often TCP) layer header */
    offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN + PBUF_TRANSPORT_HLEN;
    break;
  case PBUF_IP:
    /* add room for IP layer header */
    offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN;
    break;
  case PBUF_LINK:
    /* add room for link layer header */
    offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN;
    break;
  case PBUF_RAW_TX:
    /* add room for encapsulating link layer headers (e.g. 802.11) */
    offset = PBUF_LINK_ENCAPSULATION_HLEN;
    break;
  case PBUF_RAW:
    offset = 0;
    break;
  default:
    LWIP_ASSERT("pbuf_alloced_custom: bad pbuf layer", 0);
    return NULL;
  }

  if (LWIP_MEM_ALIGN_SIZE(offset) + length > payload_mem_len) {
    LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_WARNING, ("pbuf_alloced_custom(length=%"U16_F") buffer too short\n", length));
    return NULL;
  }

  p->pbuf.next = NULL;
  if (payload_mem != NULL) {
    p->pbuf.payload = (u8_t *)payload_mem + LWIP_MEM_ALIGN_SIZE(offset);
  } else {
    p->pbuf.payload = NULL;
  }
  p->pbuf.flags = PBUF_FLAG_IS_CUSTOM;
  p->pbuf.len = p->pbuf.tot_len = length;
  p->pbuf.type = type;
  p->pbuf.ref = 1;
  return &p->pbuf;
}
开发者ID:Stichting-MINIX-Research-Foundation,项目名称:minix,代码行数:66,代码来源:pbuf.c


示例3: pbuf_alloc

struct pbuf *
pbuf_alloc(pbuf_layer layer, u16_t length, pbuf_type type)
{
  struct pbuf *p;
  u16_t offset = 0;
  offset += 16;
  
    /* If pbuf is to be allocated in RAM, allocate memory for it. */
  p = (struct pbuf*)rt_malloc(LWIP_MEM_ALIGN_SIZE(SIZEOF_STRUCT_PBUF + offset) + LWIP_MEM_ALIGN_SIZE(length));
  if (p == RT_NULL)  return RT_NULL; 
    /* Set up internal structure of the pbuf. */
  p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + SIZEOF_STRUCT_PBUF + offset));
  p->len = length;   
  return p;
}
开发者ID:634351070,项目名称:rt-thread,代码行数:15,代码来源:uip_pbuf.c


示例4: mem_free

/**
 * Free memory previously allocated by mem_malloc. Loads the pool number
 * and calls memp_free with that pool number to put the element back into
 * its pool
 *
 * @param rmem the memory element to free
 */
void
mem_free(void *rmem)
{
  struct memp_malloc_helper *hmem;

  LWIP_ASSERT("rmem != NULL", (rmem != NULL));
  LWIP_ASSERT("rmem == MEM_ALIGN(rmem)", (rmem == LWIP_MEM_ALIGN(rmem)));

  /* get the original struct memp_malloc_helper */
  /* cast through void* to get rid of alignment warnings */
  hmem = (struct memp_malloc_helper*)(void*)((u8_t*)rmem - LWIP_MEM_ALIGN_SIZE(sizeof(struct memp_malloc_helper)));

  LWIP_ASSERT("hmem != NULL", (hmem != NULL));
  LWIP_ASSERT("hmem == MEM_ALIGN(hmem)", (hmem == LWIP_MEM_ALIGN(hmem)));
  LWIP_ASSERT("hmem->poolnr < MEMP_MAX", (hmem->poolnr < MEMP_MAX));

  MEM_STATS_DEC_USED(used, hmem->size);
#if MEMP_OVERFLOW_CHECK
  {
     u16_t i;
     LWIP_ASSERT("MEM_USE_POOLS: invalid chunk size",
        hmem->size <= memp_pools[hmem->poolnr]->size);
     /* check that unused memory remained untouched (diff between requested size and selected pool's size) */
     for (i = hmem->size; i < memp_pools[hmem->poolnr]->size; i++) {
        u8_t data = *((u8_t*)rmem + i);
        LWIP_ASSERT("MEM_USE_POOLS: mem overflow detected", data == 0xcd);
     }
  }
#endif /* MEMP_OVERFLOW_CHECK */

  /* and put it in the pool we saved earlier */
  memp_free(hmem->poolnr, hmem);
}
开发者ID:SolarTeamEindhoven,项目名称:mbed,代码行数:40,代码来源:lwip_mem.c


示例5: mem_free

/**
 * Free memory previously allocated by mem_malloc. Loads the pool number
 * and calls memp_free with that pool number to put the element back into
 * its pool
 *
 * @param rmem the memory element to free
 */
void
mem_free(void *rmem)
{
  struct memp_malloc_helper *hmem;

  LWIP_ASSERT("rmem != NULL", (rmem != NULL));
  LWIP_ASSERT("rmem == MEM_ALIGN(rmem)", (rmem == LWIP_MEM_ALIGN(rmem)));

  /* get the original struct memp_malloc_helper */
  hmem = (struct memp_malloc_helper*)(void*)((u8_t*)rmem - LWIP_MEM_ALIGN_SIZE(sizeof(struct memp_malloc_helper)));

  LWIP_ASSERT("hmem != NULL", (hmem != NULL));
  LWIP_ASSERT("hmem == MEM_ALIGN(hmem)", (hmem == LWIP_MEM_ALIGN(hmem)));
  LWIP_ASSERT("hmem->poolnr < MEMP_MAX", (hmem->poolnr < MEMP_MAX));

#if MEMP_OVERFLOW_CHECK
  {
     u16_t i;
     LWIP_ASSERT("MEM_USE_POOLS: invalid chunk size",
        hmem->size <= memp_sizes[hmem->poolnr]);
     /* check that unused memory remained untouched */
     for (i = hmem->size; i < memp_sizes[hmem->poolnr]; i++) {
        u8_t data = *((u8_t*)rmem + i);
        LWIP_ASSERT("MEM_USE_POOLS: mem overflow detected", data == 0xcd);
     }
  }
#endif /* MEMP_OVERFLOW_CHECK */

  /* and put it in the pool we saved earlier */
  memp_free(hmem->poolnr, hmem);
}
开发者ID:alemoke,项目名称:esp8266-frankenstein,代码行数:38,代码来源:mem.c


示例6: LWIP_MEM_ALIGN_SIZE

/**
 * Allocate memory: determine the smallest pool that is big enough
 * to contain an element of 'size' and get an element from that pool.
 *
 * @param size the size in bytes of the memory needed
 * @return a pointer to the allocated memory or NULL if the pool is empty
 */
void *mem_malloc(mem_size_t size) {
  void *ret;
  struct memp_malloc_helper *element;
  memp_t poolnr;
  mem_size_t required_size =
      size + LWIP_MEM_ALIGN_SIZE(sizeof(struct memp_malloc_helper));

  for (poolnr = MEMP_POOL_FIRST; poolnr <= MEMP_POOL_LAST;
       poolnr = (memp_t)(poolnr + 1)) {
#if MEM_USE_POOLS_TRY_BIGGER_POOL
  again:
#endif /* MEM_USE_POOLS_TRY_BIGGER_POOL */
       /* is this pool big enough to hold an element of the required size
          plus a struct memp_malloc_helper that saves the pool this element came
          from? */
    if (required_size <= memp_sizes[poolnr]) {
      break;
    }
  }
  if (poolnr > MEMP_POOL_LAST) {
    LWIP_ASSERT("mem_malloc(): no pool is that big!", 0);
    return NULL;
  }
  element = (struct memp_malloc_helper *) memp_malloc(poolnr);
  if (element == NULL) {
/* No need to DEBUGF or ASSERT: This error is already
   taken care of in memp.c */
#if MEM_USE_POOLS_TRY_BIGGER_POOL
    /** Try a bigger pool if this one is empty! */
    if (poolnr < MEMP_POOL_LAST) {
      poolnr++;
      goto again;
    }
#endif /* MEM_USE_POOLS_TRY_BIGGER_POOL */
    return NULL;
  }

  /* save the pool number this element came from */
  element->poolnr = poolnr;
  /* and return a pointer to the memory directly after the struct
   * memp_malloc_helper */
  ret =
      (u8_t *) element + LWIP_MEM_ALIGN_SIZE(sizeof(struct memp_malloc_helper));

  return ret;
}
开发者ID:cesanta,项目名称:mongoose-iot,代码行数:53,代码来源:mem.c


示例7: lwip_comm_mem_malloc

//lwip内核部分,内存申请
//返回值:0,成功;
//    其他,失败
u8 lwip_comm_mem_malloc(void)
{
	u32 mempsize;
	u32 ramheapsize; 
	mempsize=memp_get_memorysize();			//得到memp_memory数组大小
	memp_memory=mymalloc(SRAMIN,mempsize);	//为memp_memory申请内存
	ramheapsize=LWIP_MEM_ALIGN_SIZE(MEM_SIZE)+2*LWIP_MEM_ALIGN_SIZE(4*3)+MEM_ALIGNMENT;//得到ram heap大小
	ram_heap=mymalloc(SRAMIN,ramheapsize);	//为ram_heap申请内存 
	TCPIP_THREAD_TASK_STK=mymalloc(SRAMIN,TCPIP_THREAD_STACKSIZE*4);//给内核任务申请堆栈 
	LWIP_DHCP_TASK_STK=mymalloc(SRAMIN,LWIP_DHCP_STK_SIZE*4);		//给dhcp任务堆栈申请内存空间
	if(!memp_memory||!ram_heap||!TCPIP_THREAD_TASK_STK||!LWIP_DHCP_TASK_STK)//有申请失败的
	{
		lwip_comm_mem_free();
		return 1;
	}
	return 0;	
}
开发者ID:houzhenggang,项目名称:IHome-ContrlCenter,代码行数:20,代码来源:lwip_comm.c


示例8: pbuf_alloced_custom

/**
 * @ingroup pbuf
 * Initialize a custom pbuf (already allocated).
 * Example of custom pbuf usage: @ref zerocopyrx
 *
 * @param l header size
 * @param length size of the pbuf's payload
 * @param type type of the pbuf (only used to treat the pbuf accordingly, as
 *        this function allocates no memory)
 * @param p pointer to the custom pbuf to initialize (already allocated)
 * @param payload_mem pointer to the buffer that is used for payload and headers,
 *        must be at least big enough to hold 'length' plus the header size,
 *        may be NULL if set later.
 *        ATTENTION: The caller is responsible for correct alignment of this buffer!!
 * @param payload_mem_len the size of the 'payload_mem' buffer, must be at least
 *        big enough to hold 'length' plus the header size
 */
struct pbuf *
pbuf_alloced_custom(pbuf_layer l, u16_t length, pbuf_type type, struct pbuf_custom *p,
                    void *payload_mem, u16_t payload_mem_len)
{
  u16_t offset = (u16_t)l;
  void *payload;
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloced_custom(length=%"U16_F")\n", length));

  if (LWIP_MEM_ALIGN_SIZE(offset) + length > payload_mem_len) {
    LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_WARNING, ("pbuf_alloced_custom(length=%"U16_F") buffer too short\n", length));
    return NULL;
  }

  if (payload_mem != NULL) {
    payload = (u8_t *)payload_mem + LWIP_MEM_ALIGN_SIZE(offset);
  } else {
    payload = NULL;
  }
  pbuf_init_alloced_pbuf(&p->pbuf, payload, length, length, type, PBUF_FLAG_IS_CUSTOM);
  return &p->pbuf;
}
开发者ID:jonask1337,项目名称:esp-lwip,代码行数:38,代码来源:pbuf.c


示例9: lwip_comm_mem_malloc

//lwip内核部分,内存申请
//返回值:0,成功;
//    其他,失败
uint8_t lwip_comm_mem_malloc(void)
{
    uint32_t mempsize;
    uint32_t ramheapsize;
    mempsize=memp_get_memorysize();			//得到memp_memory数组大小
    memp_memory=mymalloc(SRAMEX,mempsize);	//为memp_memory申请内存
    printf("memp_memory内存大小为:%d\r\n",mempsize);


    ramheapsize=LWIP_MEM_ALIGN_SIZE(MEM_SIZE)+2*LWIP_MEM_ALIGN_SIZE(4*3)+MEM_ALIGNMENT;//得到ram heap大小
    ram_heap=mymalloc(SRAMEX,ramheapsize);	//为ram_heap申请内存
    printf("ram_heap内存大小为:%d\r\n",ramheapsize);


    TCPIP_THREAD_TASK_STK=mymalloc(SRAMEX,TCPIP_THREAD_STACKSIZE*4);			//给内核任务申请堆栈
    //LWIP_DHCP_TASK_STK=mymalloc(SRAMEX,LWIP_DHCP_STK_SIZE*4);					//给dhcp任务申请堆栈

    if(!memp_memory) {
        lwip_comm_mem_free();
        return 1;
    }

    if(!ram_heap) {
        lwip_comm_mem_free();
        return 1;
    }

    if(!TCPIP_THREAD_TASK_STK) {
        lwip_comm_mem_free();
        return 1;
    }
//	if((!memp_memory)||(!ram_heap)||(!TCPIP_THREAD_TASK_STK));//||!LWIP_DHCP_TASK_STK)	//有申请失败的
//	{
//		lwip_comm_mem_free();
//		return 1;
//	}

    return 0;
}
开发者ID:Siqiu,项目名称:Template_For_uCOS-II,代码行数:42,代码来源:lwip_comm.c


示例10: tcp_pbuf_prealloc

static struct pbuf *ICACHE_FLASH_ATTR
tcp_pbuf_prealloc(pbuf_layer layer, u16_t length, u16_t max_length,
                  u16_t *oversize, struct tcp_pcb *pcb, u8_t apiflags,
                  u8_t first_seg)
{
  struct pbuf *p;
  u16_t alloc = length;

#if LWIP_NETIF_TX_SINGLE_PBUF
  LWIP_UNUSED_ARG(max_length);
  LWIP_UNUSED_ARG(pcb);
  LWIP_UNUSED_ARG(apiflags);
  LWIP_UNUSED_ARG(first_seg);
  /* always create MSS-sized pbufs */
  alloc = TCP_MSS;
#else /* LWIP_NETIF_TX_SINGLE_PBUF */
  if (length < max_length) {
    /* Should we allocate an oversized pbuf, or just the minimum
     * length required? If tcp_write is going to be called again
     * before this segment is transmitted, we want the oversized
     * buffer. If the segment will be transmitted immediately, we can
     * save memory by allocating only length. We use a simple
     * heuristic based on the following information:
     *
     * Did the user set TCP_WRITE_FLAG_MORE?
     *
     * Will the Nagle algorithm defer transmission of this segment?
     */
    if ((apiflags & TCP_WRITE_FLAG_MORE) ||
        (!(pcb->flags & TF_NODELAY) &&
         (!first_seg ||
          pcb->unsent != NULL ||
          pcb->unacked != NULL))) {
      alloc = LWIP_MIN(max_length, LWIP_MEM_ALIGN_SIZE(length + TCP_OVERSIZE));
    }
  }
#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
  p = pbuf_alloc(layer, alloc, PBUF_RAM);
  if (p == NULL) {
    return NULL;
  }
  LWIP_ASSERT("need unchained pbuf", p->next == NULL);
  *oversize = p->len - length;
  /* trim p->len to the currently used size */
  p->len = p->tot_len = length;
  return p;
}
开发者ID:ankurmittal1991,项目名称:esp8266-devkit,代码行数:47,代码来源:tcp_out.c


示例11: mem_free

/**
 * Free memory previously allocated by mem_malloc. Loads the pool number
 * and calls memp_free with that pool number to put the element back into
 * its pool
 *
 * @param rmem the memory element to free
 */
void
mem_free(void *rmem)
{
  struct memp_malloc_helper *hmem;

  LWIP_ASSERT("rmem != NULL", (rmem != NULL));
  LWIP_ASSERT("rmem == MEM_ALIGN(rmem)", (rmem == LWIP_MEM_ALIGN(rmem)));

  /* get the original struct memp_malloc_helper */
  hmem = (struct memp_malloc_helper*)(void*)((u8_t*)rmem - LWIP_MEM_ALIGN_SIZE(sizeof(struct memp_malloc_helper)));

  LWIP_ASSERT("hmem != NULL", (hmem != NULL));
  LWIP_ASSERT("hmem == MEM_ALIGN(hmem)", (hmem == LWIP_MEM_ALIGN(hmem)));
  LWIP_ASSERT("hmem->poolnr < MEMP_MAX", (hmem->poolnr < MEMP_MAX));

  /* and put it in the pool we saved earlier */
  memp_free(hmem->poolnr, hmem);
}
开发者ID:cxy560,项目名称:ZCloud-WM,代码行数:25,代码来源:mem.c


示例12: mem_init

/**
 * Zero the heap and initialize start, end and lowest-free
 */
void
mem_init(LWIP_MEM_CFG *mem_cfg)
{
  struct mem *mem;
  BOOL en = mem_cfg->enable;
  UINT8 *start = mem_cfg->start;
  UINT32 length = LWIP_MEM_ALIGN_SIZE(mem_cfg->length);
  
  LWIP_ASSERT("Sanity check alignment",
    (SIZEOF_STRUCT_MEM & (MEM_ALIGNMENT-1)) == 0);

  if(en == TRUE)
  {
    ram_heap = (UINT8 *)start;
    MEM_SIZE_ALIGNED = (length - (2*SIZEOF_STRUCT_MEM) - MEM_ALIGNMENT);
  }
  else
  {
    ram_heap = (UINT8 *)MALLOC(MEM_SIZE);
    MEM_SIZE_ALIGNED = (MEM_SIZE - (2*SIZEOF_STRUCT_MEM) - MEM_ALIGNMENT);
  }
  
  /* align the heap */
  ram = LWIP_MEM_ALIGN(ram_heap);
  /* initialize the start of the heap */
  mem = (struct mem *)ram;
  mem->next = MEM_SIZE_ALIGNED;
  mem->prev = 0;
  mem->used = 0;
  /* initialize the end of the heap */
  ram_end = (struct mem *)&ram[MEM_SIZE_ALIGNED];
  ram_end->used = 1;
  ram_end->next = MEM_SIZE_ALIGNED;
  ram_end->prev = MEM_SIZE_ALIGNED;

  mem_sem = sys_sem_new(1);

  /* initialize the lowest-free pointer to the start of the heap */
  lfree = (struct mem *)ram;

#if MEM_STATS
  lwip_stats.mem.avail = MEM_SIZE_ALIGNED;
#endif /* MEM_STATS */
}
开发者ID:alkap007,项目名称:ali3606,代码行数:47,代码来源:mem.c


示例13: pbuf_alloc

/**
 * @ingroup pbuf
 * Allocates a pbuf of the given type (possibly a chain for PBUF_POOL type).
 *
 * The actual memory allocated for the pbuf is determined by the
 * layer at which the pbuf is allocated and the requested size
 * (from the size parameter).
 *
 * @param layer flag to define header size
 * @param length size of the pbuf's payload
 * @param type this parameter decides how and where the pbuf
 * should be allocated as follows:
 *
 * - PBUF_RAM: buffer memory for pbuf is allocated as one large
 *             chunk. This includes protocol headers as well.
 * - PBUF_ROM: no buffer memory is allocated for the pbuf, even for
 *             protocol headers. Additional headers must be prepended
 *             by allocating another pbuf and chain in to the front of
 *             the ROM pbuf. It is assumed that the memory used is really
 *             similar to ROM in that it is immutable and will not be
 *             changed. Memory which is dynamic should generally not
 *             be attached to PBUF_ROM pbufs. Use PBUF_REF instead.
 * - PBUF_REF: no buffer memory is allocated for the pbuf, even for
 *             protocol headers. It is assumed that the pbuf is only
 *             being used in a single thread. If the pbuf gets queued,
 *             then pbuf_take should be called to copy the buffer.
 * - PBUF_POOL: the pbuf is allocated as a pbuf chain, with pbufs from
 *              the pbuf pool that is allocated during pbuf_init().
 *
 * @return the allocated pbuf. If multiple pbufs where allocated, this
 * is the first pbuf of a pbuf chain.
 */
struct pbuf *
pbuf_alloc(pbuf_layer layer, u16_t length, pbuf_type type)
{
  struct pbuf *p, *q, *r;
  u16_t offset;
  s32_t rem_len; /* remaining length */
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F")\n", length));

  /* determine header offset */
  switch (layer) {
  case PBUF_TRANSPORT:
    /* add room for transport (often TCP) layer header */
    offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN + PBUF_TRANSPORT_HLEN;
    break;
  case PBUF_IP:
    /* add room for IP layer header */
    offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN;
    break;
  case PBUF_LINK:
    /* add room for link layer header */
    offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN;
    break;
  case PBUF_RAW_TX:
    /* add room for encapsulating link layer headers (e.g. 802.11) */
    offset = PBUF_LINK_ENCAPSULATION_HLEN;
    break;
  case PBUF_RAW:
    /* no offset (e.g. RX buffers or chain successors) */
    offset = 0;
    break;
  default:
    LWIP_ASSERT("pbuf_alloc: bad pbuf layer", 0);
    return NULL;
  }

  switch (type) {
  case PBUF_POOL:
    /* allocate head of pbuf chain into p */
    p = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL);
    LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc: allocated pbuf %p\n", (void *)p));
    if (p == NULL) {
      PBUF_POOL_IS_EMPTY();
      return NULL;
    }
    p->type = type;
    p->next = NULL;
    p->if_idx = NETIF_NO_INDEX;

    /* make the payload pointer point 'offset' bytes into pbuf data memory */
    p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + (SIZEOF_STRUCT_PBUF + offset)));
    LWIP_ASSERT("pbuf_alloc: pbuf p->payload properly aligned",
            ((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0);
    /* the total length of the pbuf chain is the requested size */
    p->tot_len = length;
    /* set the length of the first pbuf in the chain */
    p->len = LWIP_MIN(length, PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset));
    LWIP_ASSERT("check p->payload + p->len does not overflow pbuf",
                ((u8_t*)p->payload + p->len <=
                 (u8_t*)p + SIZEOF_STRUCT_PBUF + PBUF_POOL_BUFSIZE_ALIGNED));
    LWIP_ASSERT("PBUF_POOL_BUFSIZE must be bigger than MEM_ALIGNMENT",
      (PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset)) > 0 );
    /* set reference count (needed here in case we fail) */
    p->ref = 1;

    /* now allocate the tail of the pbuf chain */

    /* remember first pbuf for linkage in next iteration */
    r = p;
//.........这里部分代码省略.........
开发者ID:Stichting-MINIX-Research-Foundation,项目名称:minix,代码行数:101,代码来源:pbuf.c


示例14: mem_malloc

/**
 * Adam's mem_malloc() plus solution for bug #17922
 * Allocate a block of memory with a minimum of 'size' bytes.
 *
 * @param size is the minimum size of the requested block in bytes.
 * @return pointer to allocated memory or NULL if no free memory was found.
 *
 * Note that the returned value will always be aligned (as defined by MEM_ALIGNMENT).
 */
void *
mem_malloc(mem_size_t size)
{
  mem_size_t ptr, ptr2;
  struct mem *mem, *mem2;
#if LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
  u8_t local_mem_free_count = 0;
#endif /* LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT */
  LWIP_MEM_ALLOC_DECL_PROTECT();

  if (size == 0) {
    return NULL;
  }

  /* Expand the size of the allocated memory region so that we can
     adjust for alignment. */
  size = LWIP_MEM_ALIGN_SIZE(size);

  if(size < MIN_SIZE_ALIGNED) {
    /* every data block must be at least MIN_SIZE_ALIGNED long */
    size = MIN_SIZE_ALIGNED;
  }

  if (size > MEM_SIZE_ALIGNED) {
    return NULL;
  }

  /* protect the heap from concurrent access */
  sys_mutex_lock(&mem_mutex);
  LWIP_MEM_ALLOC_PROTECT();
#if LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
  /* run as long as a mem_free disturbed mem_malloc or mem_trim */
  do {
    local_mem_free_count = 0;
#endif /* LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT */

    /* Scan through the heap searching for a free block that is big enough,
     * beginning with the lowest free block.
     */
    for (ptr = (mem_size_t)((u8_t *)lfree - ram); ptr < MEM_SIZE_ALIGNED - size;
         ptr = ((struct mem *)(void *)&ram[ptr])->next) {
      mem = (struct mem *)(void *)&ram[ptr];
#if LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
      mem_free_count = 0;
      LWIP_MEM_ALLOC_UNPROTECT();
      /* allow mem_free or mem_trim to run */
      LWIP_MEM_ALLOC_PROTECT();
      if (mem_free_count != 0) {
        /* If mem_free or mem_trim have run, we have to restart since they
           could have altered our current struct mem. */
        local_mem_free_count = 1;
        break;
      }
#endif /* LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT */

      if ((!mem->used) &&
          (mem->next - (ptr + SIZEOF_STRUCT_MEM)) >= size) {
        /* mem is not used and at least perfect fit is possible:
         * mem->next - (ptr + SIZEOF_STRUCT_MEM) gives us the 'user data size' of mem */

        if (mem->next - (ptr + SIZEOF_STRUCT_MEM) >= (size + SIZEOF_STRUCT_MEM + MIN_SIZE_ALIGNED)) {
          /* (in addition to the above, we test if another struct mem (SIZEOF_STRUCT_MEM) containing
           * at least MIN_SIZE_ALIGNED of data also fits in the 'user data space' of 'mem')
           * -> split large block, create empty remainder,
           * remainder must be large enough to contain MIN_SIZE_ALIGNED data: if
           * mem->next - (ptr + (2*SIZEOF_STRUCT_MEM)) == size,
           * struct mem would fit in but no data between mem2 and mem2->next
           * @todo we could leave out MIN_SIZE_ALIGNED. We would create an empty
           *       region that couldn't hold data, but when mem->next gets freed,
           *       the 2 regions would be combined, resulting in more free memory
           */
          ptr2 = ptr + SIZEOF_STRUCT_MEM + size;
          /* create mem2 struct */
          mem2 = (struct mem *)(void *)&ram[ptr2];
          mem2->used = 0;
          mem2->next = mem->next;
          mem2->prev = ptr;
          /* and insert it between mem and mem->next */
          mem->next = ptr2;
          mem->used = 1;

          if (mem2->next != MEM_SIZE_ALIGNED) {
            ((struct mem *)(void *)&ram[mem2->next])->prev = ptr2;
          }
          MEM_STATS_INC_USED(used, (size + SIZEOF_STRUCT_MEM));
        } else {
          /* (a mem2 struct does no fit into the user data space of mem and mem->next will always
           * be used at this point: if not we have 2 unused structs in a row, plug_holes should have
           * take care of this).
           * -> near fit or excact fit: do not split, no mem2 creation
           * also can't move mem->next directly behind mem, since mem->next
//.........这里部分代码省略.........
开发者ID:networkextension,项目名称:A.BIG.T,代码行数:101,代码来源:mem.c


示例15: mem_trim

/**
 * Shrink memory returned by mem_malloc().
 *
 * @param rmem pointer to memory allocated by mem_malloc the is to be shrinked
 * @param newsize required size after shrinking (needs to be smaller than or
 *                equal to the previous size)
 * @return for compatibility reasons: is always == rmem, at the moment
 *         or NULL if newsize is > old size, in which case rmem is NOT touched
 *         or freed!
 */
void *
mem_trim(void *rmem, mem_size_t newsize)
{
  mem_size_t size;
  mem_size_t ptr, ptr2;
  struct mem *mem, *mem2;
  /* use the FREE_PROTECT here: it protects with sem OR SYS_ARCH_PROTECT */
  LWIP_MEM_FREE_DECL_PROTECT();

  /* Expand the size of the allocated memory region so that we can
     adjust for alignment. */
  newsize = LWIP_MEM_ALIGN_SIZE(newsize);

  if(newsize < MIN_SIZE_ALIGNED) {
    /* every data block must be at least MIN_SIZE_ALIGNED long */
    newsize = MIN_SIZE_ALIGNED;
  }

  if (newsize > MEM_SIZE_ALIGNED) {
    return NULL;
  }

  LWIP_ASSERT("mem_trim: legal memory", (u8_t *)rmem >= (u8_t *)ram &&
   (u8_t *)rmem < (u8_t *)ram_end);

  if ((u8_t *)rmem < (u8_t *)ram || (u8_t *)rmem >= (u8_t *)ram_end) {
    SYS_ARCH_DECL_PROTECT(lev);
    LWIP_DEBUGF(MEM_DEBUG | LWIP_DBG_LEVEL_SEVERE, ("mem_trim: illegal memory\n"));
    /* protect mem stats from concurrent access */
    SYS_ARCH_PROTECT(lev);
    MEM_STATS_INC(illegal);
    SYS_ARCH_UNPROTECT(lev);
    return rmem;
  }
  /* Get the corresponding struct mem ... */
  mem = (struct mem *)(void *)((u8_t *)rmem - SIZEOF_STRUCT_MEM);
  /* ... and its offset pointer */
  ptr = (mem_size_t)((u8_t *)mem - ram);

  size = mem->next - ptr - SIZEOF_STRUCT_MEM;
  LWIP_ASSERT("mem_trim can only shrink memory", newsize <= size);
  if (newsize > size) {
    /* not supported */
    return NULL;
  }
  if (newsize == size) {
    /* No change in size, simply return */
    return rmem;
  }

  /* protect the heap from concurrent access */
  LWIP_MEM_FREE_PROTECT();

  mem2 = (struct mem *)(void *)&ram[mem->next];
  if(mem2->used == 0) {
    /* The next struct is unused, we can simply move it at little */
    mem_size_t next;
    /* remember the old next pointer */
    next = mem2->next;
    /* create new struct mem which is moved directly after the shrinked mem */
    ptr2 = ptr + SIZEOF_STRUCT_MEM + newsize;
    if (lfree == mem2) {
      lfree = (struct mem *)(void *)&ram[ptr2];
    }
    mem2 = (struct mem *)(void *)&ram[ptr2];
    mem2->used = 0;
    /* restore the next pointer */
    mem2->next = next;
    /* link it back to mem */
    mem2->prev = ptr;
    /* link mem to it */
    mem->next = ptr2;
    /* last thing to restore linked list: as we have moved mem2,
     * let 'mem2->next->prev' point to mem2 again. but only if mem2->next is not
     * the end of the heap */
    if (mem2->next != MEM_SIZE_ALIGNED) {
      ((struct mem *)(void *)&ram[mem2->next])->prev = ptr2;
    }
    MEM_STATS_DEC_USED(used, (size - newsize));
    /* no need to plug holes, we've already done that */
  } else if (newsize + SIZEOF_STRUCT_MEM + MIN_SIZE_ALIGNED <= size) {
    /* Next struct is used but there's room for another struct mem with
     * at least MIN_SIZE_ALIGNED of data.
     * Old size ('size') must be big enough to contain at least 'newsize' plus a struct mem
     * ('SIZEOF_STRUCT_MEM') with some data ('MIN_SIZE_ALIGNED').
     * @todo we could leave out MIN_SIZE_ALIGNED. We would create an empty
     *       region that couldn't hold data, but when mem->next gets freed,
     *       the 2 regions would be combined, resulting in more free memory */
    ptr2 = ptr + SIZEOF_STRUCT_MEM + newsize;
    mem2 = (struct mem *)(void *)&ram[ptr2];
//.........这里部分代码省略.........
开发者ID:networkextension,项目名称:A.BIG.T,代码行数:101,代码来源:mem.c


示例16: LWIP_DEBUGF

  }
  /* the datagram is not (yet?) reassembled completely */
  LWIP_DEBUGF(IP_REASS_DEBUG,("ip_reass_pbufcount: %d out\n", ip_reass_pbufcount));
  return NULL;

nullreturn:
  LWIP_DEBUGF(IP_REASS_DEBUG,("ip_reass: nullreturn\n"));
  IPFRAG_STATS_INC(ip_frag.drop);
  pbuf_free(p);
  return NULL;
}
#endif /* IP_REASSEMBLY */

#if IP_FRAG
#if IP_FRAG_USES_STATIC_BUF
static u8_t buf[LWIP_MEM_ALIGN_SIZE(IP_FRAG_MAX_MTU + MEM_ALIGNMENT - 1)];
#else /* IP_FRAG_USES_STATIC_BUF */

#if !LWIP_NETIF_TX_SINGLE_PBUF
/** Allocate a new struct pbuf_custom_ref */
static struct pbuf_custom_ref*
ip_frag_alloc_pbuf_custom_ref(void)
{
  return (struct pbuf_custom_ref*)memp_malloc(MEMP_FRAG_PBUF);
}

/** Free a struct pbuf_custom_ref */
static void
ip_frag_free_pbuf_custom_ref(struct pbuf_custom_ref* p)
{
  LWIP_ASSERT("p != NULL", p != NULL);
开发者ID:0wsqqsw,项目名称:lantern,代码行数:31,代码来源:ip_frag.c


示例17: mem_malloc

/**
 * Adam's mem_malloc() plus solution for bug #17922
 * Allocate a block of memory with a minimum of 'size' bytes.
 *
 * @param size is the minimum size of the requested block in bytes.
 * @return pointer to allocated memory or NULL if no free memory was found.
 *
 * Note that the returned value will always be aligned (as defined by MEM_ALIGNMENT).
 */
	void *
mem_malloc(mem_size_t size)
{
	mem_size_t ptr, ptr2;
	struct mem *mem, *mem2;

	if (size == 0) {
		return NULL;
	}

	/* Expand the size of the allocated memory region so that we can
	   adjust for alignment. */
	size = LWIP_MEM_ALIGN_SIZE(size);

	if(size < MIN_SIZE_ALIGNED) {
		/* every data block must be at least MIN_SIZE_ALIGNED long */
		size = MIN_SIZE_ALIGNED;
	}

	if (size > MEM_SIZE_ALIGNED) {
		return NULL;
	}

	/* protect the heap from concurrent access */
	sys_arch_sem_wait(mem_sem, 0);

	/* Scan through the heap searching for a free block that is big enough,
	 * beginning with the lowest free block.
	 */
	for (ptr = (u8_t *)lfree - ram; ptr < MEM_SIZE_ALIGNED - size;
			ptr = ((struct mem *)&ram[ptr])->next) {
		mem = (struct mem *)&ram[ptr];

		if ((!mem->used) &&
				(mem->next - (ptr + SIZEOF_STRUCT_MEM)) >= size) {
			/* mem is not used and at least perfect fit is possible:
			 * mem->next - (ptr + SIZEOF_STRUCT_MEM) gives us the 'user data size' of mem */

			if (mem->next - (ptr + SIZEOF_STRUCT_MEM) >= (size + SIZEOF_STRUCT_MEM + MIN_SIZE_ALIGNED)) {
				/* (in addition to the above, we test if another struct mem (SIZEOF_STRUCT_MEM) containing
				 * at least MIN_SIZE_ALIGNED of data also fits in the 'user data space' of 'mem')
				 * -> split large block, create empty remainder,
				 * remainder must be large enough to contain MIN_SIZE_ALIGNED data: if
				 * mem->next - (ptr + (2*SIZEOF_STRUCT_MEM)) == size,
				 * struct mem would fit in but no data between mem2 and mem2->next
				 * @todo we could leave out MIN_SIZE_ALIGNED. We would create an empty
				 *       region that couldn't hold data, but when mem->next gets freed,
				 *       the 2 regions would be combined, resulting in more free memory
				 */
				ptr2 = ptr + SIZEOF_STRUCT_MEM + size;
				/* create mem2 struct */
				mem2 = (struct mem *)&ram[ptr2];
				mem2->used = 0;
				mem2->next = mem->next;
				mem2->prev = ptr;
				/* and insert it between mem and mem->next */
				mem->next = ptr2;
				mem->used = 1;

				if (mem2->next != MEM_SIZE_ALIGNED) {
					((struct mem *)&ram[mem2->next])->prev = ptr2;
				}
#if MEM_STATS
				lwip_stats.mem.used += (size + SIZEOF_STRUCT_MEM);
				if (lwip_stats.mem.max < lwip_stats.mem.used) {
					lwip_stats.mem.max = lwip_stats.mem.used;
				}
#endif /* MEM_STATS */
			} else {
				/* (a mem2 struct does no fit into the user data space of mem and mem->next will always
				 * be used at this point: if not we have 2 unused structs in a row, plug_holes should have
				 * take care of this).
				 * -> near fit or excact fit: do not split, no mem2 creation
				 * also can't move mem->next directly behind mem, since mem->next
				 * will always be used at this point!
				 */
				mem->used = 1;
#if MEM_STATS
				lwip_stats.mem.used += mem->next - ((u8_t *)mem - ram);
				if (lwip_stats.mem.max < lwip_stats.mem.used) {
					lwip_stats.mem.max = lwip_stats.mem.used;
				}
#endif /* MEM_STATS */
			}

			if (mem == lfree) {
				/* Find next free block after mem and update lowest free pointer */
				while (lfree->used && lfree != ram_end) {
					lfree = (struct mem *)&ram[lfree->next];
				}
				LWIP_ASSERT("mem_malloc: !lfree->used", ((lfree == ram_end) || (!lfree->used)));
//.........这里部分代码省略.........
开发者ID:EATtomatoes,项目名称:PIC24F_MotorControl,代码行数:101,代码来源:mem.c


示例18: tcp_create_segment


//.........这里部分代码省略.........
 * @param length size of the pbuf's payload.
 * @param max_length maximum usable size of payload+oversize.
 * @param oversize pointer to a u16_t that will receive the number of usable tail bytes.
 * @param pcb The TCP connection that willo enqueue the pbuf.
 * @param apiflags API flags given to tcp_write.
 * @param first_seg true when this pbuf will be used in the first enqueued segment.
 * @param 
 */
static struct pbuf *
tcp_pbuf_prealloc(u16_t length, u16_t max_length,
                  u16_t *oversize, struct tcp_pcb *pcb, u8_t apiflags,
                  u8_t first_seg)
{
  struct pbuf *p;
  u16_t alloc = length;

  if (length < max_length) {
    /* Should we allocate an oversized pbuf, or just the minimum
     * length required? If tcp_write is going to be called again
     * before this segment is transmitted, we want the oversized
     * buffer. If the segment will be transmitted immediately, we can
     * save memory by allocating only length. We use a simple
     * heuristic based on the following information:
     *
     * Did the user set TCP_WRITE_FLAG_MORE?
     *
     * Will the Nagle algorithm defer transmission of this segment?
     */
    if ((apiflags & TCP_WRITE_FLAG_MORE) ||
        (!(pcb->flags & TF_NODELAY) &&
         (!first_seg ||
          pcb->unsent != NULL ||
          pcb->unacked != NULL))) {
          alloc = LWIP_MIN(max_length, LWIP_MEM_ALIGN_SIZE(length + pcb->tcp_oversize_val));
    }
  }
  p = tcp_tx_pbuf_alloc(pcb, alloc, PBUF_RAM);
  if (p == NULL) {
    return NULL;
  }
  LWIP_ASSERT("need unchained pbuf", p->next == NULL);
  *oversize = p->len - length;
  /* trim p->len to the currently used size */
  p->len = p->tot_len = length;
  return p;
}

/** Checks if tcp_write is allowed or not (checks state, snd_buf and snd_queuelen).
 *
 * @param pcb the tcp pcb to check for
 * @param len length of data to send (checked agains snd_buf)
 * @return ERR_OK if tcp_write is allowed to proceed, another err_t otherwise
 */
static err_t
tcp_write_checks(struct tcp_pcb *pcb, u32_t len)
{
  /* connection is in invalid state for data transmission? */
  if ((get_tcp_state(pcb) != ESTABLISHED) &&
      (get_tcp_state(pcb) != CLOSE_WAIT) &&
      (get_tcp_state(pcb) != SYN_SENT) &&
      (get_tcp_state(pcb) != SYN_RCVD)) {
    LWIP_DEBUGF(TCP_OUTPUT_DEBUG | LWIP_DBG_STATE | LWIP_DBG_LEVEL_SEVERE, ("tcp_write() called in invalid state\n"));
    return ERR_CONN;
  } else if (len == 0) {
    return ERR_OK;
  }
开发者ID:AlexeyAB,项目名称:libvma,代码行数:67,代码来源:tcp_out.c


示例19: low_level_input

static struct pbuf* low_level_input(struct netif *netif) {
    u16_t l, temp_l;
    struct pbuf *first_pbuf, *next_pbuf, *q;
    u16_t len;
#ifdef ENET_LITTLE_ENDIAN
    u8_t *data_temp;
#endif
    u8_t more_pkts = 1, processing_error = 0;
    
    (void)netif;
    
    /* initial pkt handling */
    if (!(rx_bd[rx_next_buf].status & ENET_RX_BD_E)) {       /* if pkt is filled */
        if (rx_bd[rx_next_buf].status & ENET_RX_BD_L) {
            more_pkts = 0;
            if (rx_bd[rx_next_buf].status & (ENET_RX_BD_LG | ENET_RX_BD_NO | ENET_RX_BD_CR | ENET_RX_BD_OV)) {
                /* bad packet */
                LINK_STATS_INC(link.memerr);
                LINK_STATS_INC(link.drop);
                goto EXIT_RX_PKT;
            }
            else {
#ifdef ENET_LITTLE_ENDIAN
                len = __REVSH(rx_bd[rx_next_buf].length);
#else
                len = rx_bd[rx_next_buf].length;
#endif 
                LINK_STATS_INC(link.recv);
            }
        }
        else /* if not L bit, then buffer's length */
            len = ENET_RX_BUF_SIZE;
        
        if ((first_pbuf = pbuf_alloc(PBUF_RAW, len, PBUF_POOL)) != NULL) {
            /* get data */
            l = 0;
            temp_l = 0;        
            /* We iterate ov 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ LWIP_UNUSED_ARG函数代码示例发布时间:2022-05-30
下一篇:
C++ LWIP_MEM_ALIGN函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap