• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ LOG_TRACE1函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中LOG_TRACE1函数的典型用法代码示例。如果您正苦于以下问题:C++ LOG_TRACE1函数的具体用法?C++ LOG_TRACE1怎么用?C++ LOG_TRACE1使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了LOG_TRACE1函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: halAudioGenerator_HbrClockDivider

void halAudioGenerator_HbrClockDivider(IM_UINT16 baseAddress, IM_UINT16 value)
{
	LOG_TRACE1(value);
	/* 9-bit width */
	access_CoreWriteByte((u8) (value), baseAddress + AG_HBR_CLKDIV0);
	access_CoreWrite(value >> 8, baseAddress + AG_HBR_CLKDIV1, 0, 1);
}
开发者ID:xavim,项目名称:android_kernel_infotm_imapx800,代码行数:7,代码来源:halAudioGenerator.c


示例2: edid_GetSad

int edid_GetSad(u16 baseAddr, unsigned int n, shortAudioDesc_t * sad)
{
	LOG_TRACE1(n);
	if (n < edid_GetSadCount(baseAddr))
	{
		*sad = edid_mSad[n];
		return TRUE;
	}
	return FALSE;
}
开发者ID:IngenicSemiconductor,项目名称:X-BOOT-WARRIOR,代码行数:10,代码来源:edid.c


示例3: edid_GetSvd

int edid_GetSvd(u16 baseAddr, unsigned int n, shortVideoDesc_t * svd)
{
	LOG_TRACE1(n);
	if (n < edid_GetSvdCount(baseAddr))
	{
		*svd = edid_mSvd[n];
		return TRUE;
	}
	return FALSE;
}
开发者ID:IngenicSemiconductor,项目名称:X-BOOT-WARRIOR,代码行数:10,代码来源:edid.c


示例4: edid_GetDtd

int edid_GetDtd(u16 baseAddr, unsigned int n, dtd_t * dtd)
{
	LOG_TRACE1(n);
	if (n < edid_GetDtdCount(baseAddr))
	{
		*dtd = edid_mDtd[n];
		return TRUE;
	}
	return FALSE;
}
开发者ID:IngenicSemiconductor,项目名称:X-BOOT-WARRIOR,代码行数:10,代码来源:edid.c


示例5: halVideoPacketizer_PixelRepetitionFactor

void halVideoPacketizer_PixelRepetitionFactor(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	/* desired factor */
	access_CoreWrite(value, (baseAddr + VP_PR_CD), 0, 4);
	/* enable stuffing */
	access_CoreWrite(1, (baseAddr + VP_STUFF), 0, 1);
	/* enable block */
	access_CoreWrite((value > 1) ? 1 : 0, (baseAddr + VP_CONF), 4, 1);
	/* bypass block */
	access_CoreWrite((value > 1) ? 0 : 1, (baseAddr + VP_CONF), 2, 1);
}
开发者ID:IngenicSemiconductor,项目名称:X-BOOT-WARRIOR,代码行数:12,代码来源:halVideoPacketizer.c


示例6: Signal_Post

VOID Signal_Post( Signal *pThis )
{
	//SEM_postBinary(pThis->Handle);
#ifdef	ToFindExcpError
	//LOG_TRACE1("Inside signalpost pThis->Handle : 0x%x",pThis->Handle);
if(CSL_chipReadDNUM ()==1)
{
	NumSignal++;
		LOG_TRACE1("signal posting :%d ",NumSignal);
}


#endif

	Semaphore_post(pThis->Handle);
#ifdef	ToFindExcpError
//	LOG_TRACE0(" signal posted");
#endif
}
开发者ID:nachiram,项目名称:dsp-layer1-gsm-processing-c6678,代码行数:19,代码来源:Task.c


示例7: halAudioGenerator_UserLeft

void halAudioGenerator_UserLeft(IM_UINT16 baseAddress, IM_UINT8 bit, IM_UINT8 channelNo)
{
	LOG_TRACE1(bit);
	switch (channelNo)
	{
		case 0:
			access_CoreWrite(bit, baseAddress + AG_SPDIF_CONF, 2, 1);
			break;
		case 1:
			access_CoreWrite(bit, baseAddress + AG_GPA_USERBIT, 0, 1);
			break;
		case 2:
			access_CoreWrite(bit, baseAddress + AG_GPA_USERBIT, 2, 1);
			break;
		case 3:
			access_CoreWrite(bit, baseAddress + AG_GPA_USERBIT, 4, 1);
			break;
		default:
			LOG_ERROR("wrong channel number");
			break;
	}
}
开发者ID:xavim,项目名称:android_kernel_infotm_imapx800,代码行数:22,代码来源:halAudioGenerator.c


示例8: halAudioGenerator_IecChannelLeft

void halAudioGenerator_IecChannelLeft(IM_UINT16 baseAddress, IM_UINT8 value, IM_UINT8 channelNo)
{
	LOG_TRACE1(value);
	switch (channelNo)
	{
		case 0:
			access_CoreWrite(value, baseAddress + AG_SPDIF_AUDSCHNLS3, 0, 4);
			break;
		case 1:
			access_CoreWrite(value, baseAddress + AG_GPA_CHNUM1, 0, 4);
			break;
		case 2:
			access_CoreWrite(value, baseAddress + AG_GPA_CHNUM2, 0, 4);
			break;
		case 3:
			access_CoreWrite(value, baseAddress + AG_GPA_CHNUM3, 0, 4);
			break;
		default:
			LOG_ERROR("wrong channel number");
			break;
	}	
}
开发者ID:xavim,项目名称:android_kernel_infotm_imapx800,代码行数:22,代码来源:halAudioGenerator.c


示例9: halVideoPacketizer_OutputSelector

void halVideoPacketizer_OutputSelector(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	if (value == 0)
	{ /* pixel packing */
		access_CoreWrite(0, (baseAddr + VP_CONF), 6, 1);
		/* enable pixel packing */
		access_CoreWrite(1, (baseAddr + VP_CONF), 5, 1);
		access_CoreWrite(0, (baseAddr + VP_CONF), 3, 1);
	}
	else if (value == 1)
	{ /* YCC422 */
		access_CoreWrite(0, (baseAddr + VP_CONF), 6, 1);
		access_CoreWrite(0, (baseAddr + VP_CONF), 5, 1);
		/* enable YCC422 */
		access_CoreWrite(1, (baseAddr + VP_CONF), 3, 1);
	}
	else if (value == 2 || value == 3)
	{ /* bypass */
		/* enable bypass */
		access_CoreWrite(1, (baseAddr + VP_CONF), 6, 1);
		access_CoreWrite(0, (baseAddr + VP_CONF), 5, 1);
		access_CoreWrite(0, (baseAddr + VP_CONF), 3, 1);
	}
	else
	{
		LOG_ERROR2("wrong output option: ", value);
		return;
	}

	/* YCC422 stuffing */
	access_CoreWrite(1, (baseAddr + VP_STUFF), 2, 1);
	/* pixel packing stuffing */
	access_CoreWrite(1, (baseAddr + VP_STUFF), 1, 1);

	/* ouput selector */
	access_CoreWrite(value, (baseAddr + VP_CONF), 0, 2);
}
开发者ID:IngenicSemiconductor,项目名称:X-BOOT-WARRIOR,代码行数:38,代码来源:halVideoPacketizer.c


示例10: halFrameComposerAudio_PacketLayout

void halFrameComposerAudio_PacketLayout(u16 baseAddr, u8 bit)
{
	LOG_TRACE1(bit);
	access_CoreWrite(bit, baseAddr + FC_AUDSCONF, 0, 1);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例11: halFrameComposerAudio_IecCgmsA

void halFrameComposerAudio_IecCgmsA(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	access_CoreWrite(value, baseAddr + FC_AUDSCHNLS0, 4, 2);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例12: halFrameComposerAudio_IecWordLength

void halFrameComposerAudio_IecWordLength(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	access_CoreWrite(value, baseAddr + FC_AUDSCHNLS8, 0, 4);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例13: halFrameComposerAudio_PacketSampleFlat

void halFrameComposerAudio_PacketSampleFlat(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	access_CoreWrite(value, baseAddr + FC_AUDSCONF, 4, 4);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例14: halFrameComposerAudio_IecClockAccuracy

void halFrameComposerAudio_IecClockAccuracy(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	access_CoreWrite(value, baseAddr + FC_AUDSCHNLS7, 4, 2);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例15: halFrameComposerAudio_IecOriginalSamplingFreq

void halFrameComposerAudio_IecOriginalSamplingFreq(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	access_CoreWrite(value, baseAddr + FC_AUDSCHNLS8, 4, 4);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例16: halFrameComposerGcp_DefaultPhase

void halFrameComposerGcp_DefaultPhase(u16 baseAddr, u8 uniform)
{
	LOG_TRACE1(uniform);
	access_CoreWrite((uniform ? 1 : 0), (baseAddr + FC_GCP), DEFAULT_PHASE, 1);
}
开发者ID:IngenicSemiconductor,项目名称:X-BOOT-WARRIOR,代码行数:5,代码来源:halFrameComposerGcp.c


示例17: halFrameComposerAudio_IecPcmMode

void halFrameComposerAudio_IecPcmMode(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	access_CoreWrite(value, baseAddr + FC_AUDSCHNLS2, 4, 3);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例18: halFrameComposerAudio_IecCopyright

void halFrameComposerAudio_IecCopyright(u16 baseAddr, u8 bit)
{
	LOG_TRACE1(bit);
	access_CoreWrite(bit, baseAddr + FC_AUDSCHNLS0, 0, 1);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c


示例19: halFrameComposerGcp_AvMute

void halFrameComposerGcp_AvMute(u16 baseAddr, u8 enable)
{
	LOG_TRACE1(enable);
	access_CoreWrite((enable ? 1 : 0), (baseAddr + FC_GCP), SET_AVMUTE, 1);
	access_CoreWrite((enable ? 0 : 1), (baseAddr + FC_GCP), CLEAR_AVMUTE, 1);
}
开发者ID:IngenicSemiconductor,项目名称:X-BOOT-WARRIOR,代码行数:6,代码来源:halFrameComposerGcp.c


示例20: halFrameComposerAudio_IecCategoryCode

void halFrameComposerAudio_IecCategoryCode(u16 baseAddr, u8 value)
{
	LOG_TRACE1(value);
	access_CoreWriteByte(value, baseAddr + FC_AUDSCHNLS1);
}
开发者ID:luoxiafeng,项目名称:MIPI_DSI,代码行数:5,代码来源:halFrameComposerAudio.c



注:本文中的LOG_TRACE1函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ LOG_UNIMPLEMENTED函数代码示例发布时间:2022-05-30
下一篇:
C++ LOG_TRACE函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap