C++ LOGGER_ERROR函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LOGGER_ERROR函数的典型用法代码示例。如果您正苦于以下问题：C++ LOGGER_ERROR函数的具体用法？C++ LOGGER_ERROR怎么用？C++ LOGGER_ERROR使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LOGGER_ERROR函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: FILE_SERVICE

	bool ConfigManager::loadConfig( const ConstString & _fileGroup, const ConstString & _applicationPath )
	{
		InputStreamInterfacePtr applicationInputStream = 
			FILE_SERVICE(m_serviceProvider)->openInputFile( _fileGroup, _applicationPath, false );

		if( applicationInputStream == nullptr )
		{
			LOGGER_ERROR(m_serviceProvider)("ConfigManager::loadConfig Invalid open application settings %s"
				, _applicationPath.c_str()
				);

			return false;
		}

		if( IniUtil::loadIni( m_ini, applicationInputStream, m_serviceProvider ) == false )
		{
			LOGGER_ERROR(m_serviceProvider)("ConfigManager::loadConfig Invalid load application settings %s"
				, _applicationPath.c_str()
				);

			return false;
		}

		return true;
	}

开发者ID:irov，项目名称:Mengine，代码行数:25，代码来源:ConfigManager.cpp

示例2: write_out_stream

static void
write_out_stream (const char *filename, char *data) {
    vmbuf_reset(&write_buffer);
    vmbuf_sprintf(&write_buffer, "{ \"message\": \"%s|%s|", hostname, filename);
    json_escape_str_vmb(&write_buffer, data);
    vmbuf_strcpy(&write_buffer, "\" }");
    vmbuf_chrcpy(&write_buffer, '\0');

    if (write_to_file) {
        if (0 > file_writer_write(&fw, vmbuf_data(&write_buffer), vmbuf_wlocpos(&write_buffer))) {
            LOGGER_ERROR("%s", "failed write attempt on outfile| aborting to diagnose!");
            abort();
        }
        return;
    }

    int threshold = INTERFACE_ONERROR_RETRY_THRESHOLD;
    while (0 > post_to_interface(vmbuf_data(&write_buffer), vmbuf_wlocpos(&write_buffer)) && (0 < threshold--)) {
        if (0 == post_to_interface(vmbuf_data(&write_buffer), vmbuf_wlocpos(&write_buffer))) {
            LOGGER_ERROR("post failed to %s, issuing reattempt#%d", eserv.hostname, threshold);
            --failure;
            break;
        }
    }
}

开发者ID:shwetanks，项目名称:logzilla，代码行数:25，代码来源:logz.c

示例3: LOGGER_ERROR

	const RenderMaterialStage * RenderMaterialManager::createRenderStageGroup( const ConstString & _name, const RenderMaterialStage & _stage )
    {
		TMapRenderStage::const_iterator it_found = m_materialStageIndexer.find( _name );

		if( it_found != m_materialStageIndexer.end() )
        {
            LOGGER_ERROR(m_serviceProvider)("RenderMaterialManager::createRenderStageGroup '%s' is already created"
                , _name.c_str()
                );

            return nullptr;
        }

		const RenderMaterialStage * cache_stage = this->cacheStage( _stage );

		if( cache_stage == nullptr )
		{
			LOGGER_ERROR( m_serviceProvider )("RenderMaterialManager::createRenderStageGroup '%s' invalid cache"
				, _name.c_str()
				);

			return nullptr;
		}
		
		return cache_stage;
    }

开发者ID:irov，项目名称:Mengine，代码行数:26，代码来源:RenderMaterialManager.cpp

示例4: http_server_init

int http_server_init(struct http_server *server) {
    /*
     * one time global initializers
     */
    if (0 > mime_types_init())
        return LOGGER_ERROR("failed to initialize mime types"), -1;
    if (0 > http_headers_init())
        return LOGGER_ERROR("failed to initialize http headers"), -1;
    /*
     * idle connection handler
     */
    server->idle_ctx = ribs_context_create(SMALL_STACK_SIZE, http_server_idle_handler);
    server->idle_ctx->data.ptr = server;
    /*
     * context pool
     */
    if (0 == server->stack_size || 0 == server->num_stacks) {
        struct rlimit rlim;
        if (0 > getrlimit(RLIMIT_STACK, &rlim))
            return LOGGER_PERROR("getrlimit(RLIMIT_STACK)"), -1;

        long total_mem = sysconf(_SC_PHYS_PAGES);
        if (total_mem < 0)
            return LOGGER_PERROR("sysconf"), -1;
        total_mem *= getpagesize();
        size_t num_ctx_in_one_map = total_mem / rlim.rlim_cur;
        /* half of total mem to start with so we don't need to enable overcommit */
        num_ctx_in_one_map >>= 1;
        LOGGER_INFO("http server pool: initial=%zu, grow=%zu", num_ctx_in_one_map, num_ctx_in_one_map);
        ctx_pool_init(&server->ctx_pool, num_ctx_in_one_map, num_ctx_in_one_map, rlim.rlim_cur, sizeof(struct http_server_context) + server->context_size);
    } else {

开发者ID:Abioy，项目名称:ribs2，代码行数:31，代码来源:http_server.c

示例5: msi_kill

int msi_kill(MSISession *session, Logger *log)
{
    if (session == NULL) {
        LOGGER_ERROR(log, "Tried to terminate non-existing session");
        return -1;
    }

    m_callback_msi_packet((struct Messenger *) session->messenger, NULL, NULL);

    if (pthread_mutex_trylock(session->mutex) != 0) {
        LOGGER_ERROR(session->messenger->log, "Failed to aquire lock on msi mutex");
        return -1;
    }

    if (session->calls) {
        MSIMessage msg;
        msg_init(&msg, requ_pop);

        MSICall *it = get_call(session, session->calls_head);

        while (it) {
            send_message(session->messenger, it->friend_number, &msg);
            MSICall *temp_it = it;
            it = it->next;
            kill_call(temp_it); /* This will eventually free session->calls */
        }
    }

    pthread_mutex_unlock(session->mutex);
    pthread_mutex_destroy(session->mutex);

    LOGGER_DEBUG(session->messenger->log, "Terminated session: %p", session);
    free(session);
    return 0;
}

开发者ID:GrayHatter，项目名称:toxcore，代码行数:35，代码来源:msi.c

示例6: msi_hangup

int msi_hangup(MSICall *call)
{
    if (!call || !call->session) {
        return -1;
    }

    MSISession *session = call->session;

    LOGGER_DEBUG(session->messenger->log, "Session: %p Hanging up call with friend: %u", call->session,
                 call->friend_number);

    if (pthread_mutex_trylock(session->mutex) != 0) {
        LOGGER_ERROR(session->messenger->log, "Failed to aquire lock on msi mutex");
        return -1;
    }

    if (call->state == msi_CallInactive) {
        LOGGER_ERROR(session->messenger->log, "Call is in invalid state!");
        pthread_mutex_unlock(session->mutex);
        return -1;
    }

    MSIMessage msg;
    msg_init(&msg, requ_pop);

    send_message(session->messenger, call->friend_number, &msg);

    kill_call(call);
    pthread_mutex_unlock(session->mutex);
    return 0;
}

开发者ID:GrayHatter，项目名称:toxcore，代码行数:31，代码来源:msi.c

示例7: toxav_kill_transmission

/**
 * @brief Call this at the end of the transmission.
 *
 * @param av Handler.
 * @return int
 * @retval 0 Success.
 * @retval ToxAvError On error.
 */
int toxav_kill_transmission ( ToxAv *av, int32_t call_index )
{
    if (cii(call_index, av->msi_session)) return ErrorNoCall;

    CallSpecific *call = &av->calls[call_index];

    if ( call->crtps[audio_index] && -1 == rtp_terminate_session(call->crtps[audio_index], av->messenger) ) {
        LOGGER_ERROR("Error while terminating audio RTP session!\n");
        return ErrorTerminatingAudioRtp;
    }

    if ( call->crtps[video_index] && -1 == rtp_terminate_session(call->crtps[video_index], av->messenger) ) {
        LOGGER_ERROR("Error while terminating video RTP session!\n");
        return ErrorTerminatingVideoRtp;
    }

    call->crtps[audio_index] = NULL;
    call->crtps[video_index] = NULL;

    if ( call->j_buf ) {
        terminate_queue(call->j_buf);
        call->j_buf = NULL;
        LOGGER_DEBUG("Terminated j queue");
    } else LOGGER_DEBUG("No j queue");

    if ( call->cs ) {
        codec_terminate_session(call->cs);
        call->cs = NULL;
        LOGGER_DEBUG("Terminated codec session");
    } else LOGGER_DEBUG("No codec session");

    return ErrorNone;
}

开发者ID:Jman012，项目名称:toxcore，代码行数:41，代码来源:toxav.c

示例8: init_audio_encoder

static int init_audio_encoder(CSSession *cs)
{
    int rc = OPUS_OK;
    cs->audio_encoder = opus_encoder_create(cs->audio_encoder_sample_rate,
                                            cs->audio_encoder_channels, OPUS_APPLICATION_AUDIO, &rc);

    if ( rc != OPUS_OK ) {
        LOGGER_ERROR("Error while starting audio encoder: %s", opus_strerror(rc));
        return -1;
    }

    rc = opus_encoder_ctl(cs->audio_encoder, OPUS_SET_BITRATE(cs->audio_encoder_bitrate));

    if ( rc != OPUS_OK ) {
        LOGGER_ERROR("Error while setting encoder ctl: %s", opus_strerror(rc));
        return -1;
    }

    rc = opus_encoder_ctl(cs->audio_encoder, OPUS_SET_COMPLEXITY(10));

    if ( rc != OPUS_OK ) {
        LOGGER_ERROR("Error while setting encoder ctl: %s", opus_strerror(rc));
        return -1;
    }

    return 0;
}

开发者ID:ittner，项目名称:toxcore，代码行数:27，代码来源:codec.c

示例9: FILE_SERVICE

	ParticleEmitterContainerInterface2Ptr ParticleEngine2::createEmitterContainerFromFile( const ConstString& _fileGroupName, const FilePath & _fileName )
	{
		if( m_available == false )
		{
			return nullptr;
		}
		
		InputStreamInterfacePtr stream = FILE_SERVICE(m_serviceProvider)
			->openInputFile( _fileGroupName, _fileName, false );
		
		if( stream == nullptr )
		{
			LOGGER_ERROR(m_serviceProvider)("ParticleEngine2::createEmitterContainerFromFile can't open file %s:%s"
				, _fileGroupName.c_str()
				, _fileName.c_str() 
				);

			return nullptr;
		}

		ParticleEmitterContainerInterface2Ptr container = PARTICLE_SYSTEM2(m_serviceProvider)
            ->createEmitterContainerFromMemory( stream, m_archivator );

		if( container == nullptr )
		{
			LOGGER_ERROR(m_serviceProvider)("ParticleEngine2::createEmitterContainerFromFile can't create emitter container '%s'"
				, _fileName.c_str() 
				);

			return nullptr;
		}

		return container;
	}

开发者ID:irov，项目名称:Mengine，代码行数:34，代码来源:ParticleEngine2.cpp

示例10: LOGGER_ERROR

	AccountInterfacePtr AccountManager::loadAccount_( const WString& _accountID )
	{
		AccountInterfacePtr account = this->newAccount_( _accountID );

        if( account == nullptr )
        {
            LOGGER_ERROR(m_serviceProvider)("AccountManager::loadAccount_ invalid create account %ls"
                , _accountID.c_str()
                );

            return nullptr;
        }
        
        if( m_accountProvider != nullptr )
        {
            m_currentAccount = account;
            m_accountProvider->onCreateAccount( _accountID );
            m_currentAccount = nullptr;
        }

        if( account->load() == false )
        {
            LOGGER_ERROR(m_serviceProvider)("AccountManager::loadAccount_ invalid load account %ls"
                , _accountID.c_str()
                );

            return nullptr;
        }       
        
		return account;
	}

开发者ID:irov，项目名称:Mengine，代码行数:31，代码来源:AccountManager.cpp

示例11: LOGGER_ERROR

    bool SDLFileInputStream::openFile_( const FilePath & _folder, const FilePath & _fileName, Char * _filePath )
    {
        if( SDLLAYER_SERVICE(m_serviceProvider)
            ->concatenateFilePath( _folder, _fileName, _filePath, MENGINE_MAX_PATH ) == false )
        {
            LOGGER_ERROR(m_serviceProvider)("SDLFileInputStream::open invlalid concatenate filePath '%s':'%s'"
                , _folder.c_str()
                , _fileName.c_str()
                );

            return false;
        }

        m_rwops = SDL_RWFromFile(_filePath, "rb");

        if ( m_rwops == nullptr )
        {
            LOGGER_ERROR(m_serviceProvider)("SDLFileInputStream::open %s invalid open"
                , _filePath
                );

            return false;
        }

#	ifdef _DEBUG
        if( SERVICE_EXIST( m_serviceProvider, NotificationServiceInterface ) == true )
        {
            NOTIFICATION_SERVICE( m_serviceProvider )
                ->notify( NOTIFICATOR_DEBUG_OPEN_FILE, _folder.c_str(), _fileName.c_str() );
        }
#	endif

        return true;
    }

开发者ID:irov，项目名称:Mengine，代码行数:34，代码来源:SDLFileInputStream.cpp

示例12: ribs_ssl_set_options

int ribs_ssl_set_options(SSL_CTX *ssl_ctx, char *cipher_list) {
    /* bugs */
    SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL); /* almost all bugs */
    SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_SSLv2); /* disable SSLv2 per RFC 6176 */
    SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_SSLv3); /* disable SSLv3. goodbye IE6 */
    SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_COMPRESSION);
    SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);

    /* ciphers */
    if (!cipher_list)
        cipher_list = _HTTP_SERVER_SSL_CIPHERS;
    SSL_CTX_set_options(ssl_ctx, SSL_OP_CIPHER_SERVER_PREFERENCE);
    if (0 == SSL_CTX_set_cipher_list(ssl_ctx, cipher_list))
        return LOGGER_ERROR("failed to initialize SSL:cipher_list"), -1;

    /* DH 2048 bits */
    SSL_CTX_set_options(ssl_ctx, SSL_OP_SINGLE_DH_USE);
    DH *dh = DH_new();
    dh->p = get_rfc3526_prime_2048(NULL);
    BN_dec2bn(&dh->g, "2");
    if (0 == SSL_CTX_set_tmp_dh(ssl_ctx, dh))
        return LOGGER_ERROR("failed to initialize SSL:dh"), -1;
    DH_free(dh);

    /* Ecliptic Curve DH */
    SSL_CTX_set_options(ssl_ctx, SSL_OP_SINGLE_ECDH_USE);
    EC_KEY *ecdh = EC_KEY_new_by_curve_name(OBJ_sn2nid("prime256v1"));
    if (ecdh == NULL)
        return LOGGER_ERROR("failed to initialize SSL:edch"), -1;
    SSL_CTX_set_tmp_ecdh(ssl_ctx, ecdh);
    EC_KEY_free(ecdh);

    return 0;
}

开发者ID:TrueSkills，项目名称:ribs2，代码行数:34，代码来源:ribs_ssl.c

示例13: LOGGER_ERROR

MSISession *msi_new(Messenger *m)
{
    if (m == NULL) {
        return NULL;
    }

    MSISession *retu = (MSISession *)calloc(sizeof(MSISession), 1);

    if (retu == NULL) {
        LOGGER_ERROR(m->log, "Allocation failed! Program might misbehave!");
        return NULL;
    }

    if (create_recursive_mutex(retu->mutex) != 0) {
        LOGGER_ERROR(m->log, "Failed to init mutex! Program might misbehave");
        free(retu);
        return NULL;
    }

    retu->messenger = m;

    m_callback_msi_packet(m, handle_msi_packet, retu);

    /* This is called when remote terminates session */
    m_callback_connectionstatus_internal_av(m, on_peer_status, retu);

    LOGGER_DEBUG(m->log, "New msi session: %p ", retu);
    return retu;
}

开发者ID:GrayHatter，项目名称:toxcore，代码行数:29，代码来源:msi.c

示例14: msi_change_capabilities

int msi_change_capabilities(MSICall *call, uint8_t capabilities)
{
    if (!call || !call->session) {
        return -1;
    }

    MSISession *session = call->session;

    LOGGER_DEBUG(session->messenger->log, "Session: %p Trying to change capabilities to friend %u", call->session,
                 call->friend_number);

    if (pthread_mutex_trylock(session->mutex) != 0) {
        LOGGER_ERROR(session->messenger->log, "Failed to aquire lock on msi mutex");
        return -1;
    }

    if (call->state != msi_CallActive) {
        LOGGER_ERROR(session->messenger->log, "Call is in invalid state!");
        pthread_mutex_unlock(session->mutex);
        return -1;
    }

    call->self_capabilities = capabilities;

    MSIMessage msg;
    msg_init(&msg, requ_push);

    msg.capabilities.exists = true;
    msg.capabilities.value = capabilities;

    send_message(call->session->messenger, call->friend_number, &msg);

    pthread_mutex_unlock(session->mutex);
    return 0;
}

开发者ID:GrayHatter，项目名称:toxcore，代码行数:35，代码来源:msi.c

示例15: LOGGER_ERROR

bool CSocker::createSocket(SOCKET sock)
{
	if( m_socket != INVALID_SOCKET )
	{
		LOGGER_ERROR("create socket failed: socket not invalid %d", m_socket);
		return false;
	}

	m_socket = sock != INVALID_SOCKET ? sock : SocketOps::CreateTCPFileDescriptor();
	if( m_socket == INVALID_SOCKET )
	{
		LOGGER_ERROR("create socket failed:%d", SocketOps::GetLastError());
		return false;
	}

	if( !SocketOps::SetGracefulClose(m_socket) )
	{
		LOGGER_ERROR("SocketOps::SetGracefulClose error:%d, socket=%d", SocketOps::GetLastError(), m_socket);
		return false;
	}

	m_status = Key_Work;

	return true;
}

开发者ID:songjundev，项目名称:b，代码行数:25，代码来源:Socker.cpp

示例16: LOGGER_ERROR

	bool Win32FileGroupDirectory::openInputFile( const FilePath & _fileName, const InputStreamInterfacePtr & _stream, size_t _offset, size_t _size, bool _streaming )
	{
		(void)_streaming;

        if( _stream == nullptr )
        {
            LOGGER_ERROR(m_serviceProvider)("Win32FileGroupDirectory::openInputFile failed _stream == NULL"
                );

            return false;
        }

        FileInputStreamInterface * file = stdex::intrusive_get<FileInputStreamInterface *>(_stream);

		if( file->open( m_path, _fileName, _offset, _size ) == false )
        {
            LOGGER_ERROR(m_serviceProvider)("Win32FileGroupDirectory::openInputFile failed open file '%s':'%s'"
                , m_path.c_str()
                , _fileName.c_str()
                );

            return false;
        }

		return true;
	}

开发者ID:irov，项目名称:Mengine，代码行数:26，代码来源:Win32FileGroupDirectory.cpp

示例17: LOGGER_ERROR

	bool ParticleConverterPTCToPTZ::convert()
	{
        FileGroupInterfacePtr fileGroup;
        if( FILE_SERVICE(m_serviceProvider)->hasFileGroup( m_options.pakName, &fileGroup ) == false )
        {
            LOGGER_ERROR(m_serviceProvider)("ParticleConverterPTCToPTZ::convert_: not found file group '%s'"
                , m_options.pakName.c_str()
                );

            return false;
        }

        const ConstString & pakPath = fileGroup->getPath();            

        ConstString full_input = Helper::concatenationFilePath( m_serviceProvider, pakPath, m_options.inputFileName );
        ConstString full_output = Helper::concatenationFilePath( m_serviceProvider, pakPath, m_options.outputFileName );
		        
		MemoryCacheBufferInterfacePtr data_cache = Helper::createMemoryCacheFile( m_serviceProvider, STRINGIZE_STRING_LOCAL( m_serviceProvider, "dev" ), full_input, false, "ParticleConverterPTCToPTZ_data" );

		if( data_cache == nullptr )
		{
			return false;
		}
			
		const Blobject::value_type * data_memory = data_cache->getMemory();
		size_t data_size = data_cache->getSize();

		if( data_memory == nullptr )
		{
			LOGGER_ERROR(m_serviceProvider)("ParticleConverterPTCToPTZ::convert_: invalid cache memory '%s'"
				, full_input.c_str()
				);

			return false;
		}

        OutputStreamInterfacePtr output = FILE_SERVICE(m_serviceProvider)
            ->openOutputFile( STRINGIZE_STRING_LOCAL( m_serviceProvider, "dev" ), full_output );

		if( output == nullptr )
		{
			LOGGER_ERROR(m_serviceProvider)("ParticleConverterPTCToPTZ::convert_: invalid open '%s'"
				, full_output.c_str()
				);

			return false;
		}

		if( Helper::writeStreamArchiveData( m_serviceProvider, output, m_archivator, GET_MAGIC_NUMBER(MAGIC_PTZ), GET_MAGIC_VERSION(MAGIC_PTZ), false, data_memory, data_size ) == false )
		{
			LOGGER_ERROR(m_serviceProvider)("ParticleConverterPTCToPTZ::convert_: invalid write '%s'"
				, full_output.c_str()
				);

			return false;
		}

		return true;
	}

开发者ID:irov，项目名称:Mengine，代码行数:59，代码来源:ParticleConverterPTCToPTZ.cpp

示例18: vc_reconfigure_encoder

int vc_reconfigure_encoder(VCSession *vc, uint32_t bit_rate, uint16_t width, uint16_t height, int16_t kf_max_dist)
{
    if (!vc) {
        return -1;
    }

    vpx_codec_enc_cfg_t cfg2 = *vc->encoder->config.enc;
    vpx_codec_err_t rc;

    if (cfg2.rc_target_bitrate == bit_rate && cfg2.g_w == width && cfg2.g_h == height && kf_max_dist == -1) {
        return 0; /* Nothing changed */
    }

    if (cfg2.g_w == width && cfg2.g_h == height && kf_max_dist == -1) {
        /* Only bit rate changed */
        LOGGER_INFO(vc->log, "bitrate change from: %u to: %u", (uint32_t)cfg2.rc_target_bitrate, (uint32_t)bit_rate);
        cfg2.rc_target_bitrate = bit_rate;
        rc = vpx_codec_enc_config_set(vc->encoder, &cfg2);

        if (rc != VPX_CODEC_OK) {
            LOGGER_ERROR(vc->log, "Failed to set encoder control setting: %s", vpx_codec_err_to_string(rc));
            return -1;
        }
    } else {
        /* Resolution is changed, must reinitialize encoder since libvpx v1.4 doesn't support
         * reconfiguring encoder to use resolutions greater than initially set.
         */
        LOGGER_DEBUG(vc->log, "Have to reinitialize vpx encoder on session %p", (void *)vc);
        vpx_codec_ctx_t new_c;
        vpx_codec_enc_cfg_t  cfg;
        vc_init_encoder_cfg(vc->log, &cfg, kf_max_dist);
        cfg.rc_target_bitrate = bit_rate;
        cfg.g_w = width;
        cfg.g_h = height;

        LOGGER_DEBUG(vc->log, "Using VP8 codec for encoder");
        rc = vpx_codec_enc_init(&new_c, video_codec_encoder_interface(), &cfg, VPX_CODEC_USE_FRAME_THREADING);

        if (rc != VPX_CODEC_OK) {
            LOGGER_ERROR(vc->log, "Failed to initialize encoder: %s", vpx_codec_err_to_string(rc));
            return -1;
        }

        int cpu_used_value = VP8E_SET_CPUUSED_VALUE;

        rc = vpx_codec_control(&new_c, VP8E_SET_CPUUSED, cpu_used_value);

        if (rc != VPX_CODEC_OK) {
            LOGGER_ERROR(vc->log, "Failed to set encoder control setting: %s", vpx_codec_err_to_string(rc));
            vpx_codec_destroy(&new_c);
            return -1;
        }

        vpx_codec_destroy(vc->encoder);
        memcpy(vc->encoder, &new_c, sizeof(new_c));
    }

    return 0;
}

开发者ID:TokTok，项目名称:toxcore，代码行数:59，代码来源:video.c

示例19: LOGGER_ERROR

	bool SoundConverterFFMPEGToOGG::convert()
	{
        FileGroupInterfacePtr fileGroup;
        if( FILE_SERVICE(m_serviceProvider)->hasFileGroup( m_options.pakName, &fileGroup ) == false )
        {
            LOGGER_ERROR(m_serviceProvider)("SoundConverterFFMPEGToOGG::convert_: not found file group '%s'"
                , m_options.pakName.c_str()
                );

            return false;
        }

        const ConstString & pakPath = fileGroup->getPath();            

        String full_input = pakPath.c_str();
        full_input += m_options.inputFileName.c_str();

        String full_output = pakPath.c_str();
        full_output += m_options.outputFileName.c_str();

        WString unicode_input;
        if( Helper::utf8ToUnicode( m_serviceProvider, full_input, unicode_input ) == false )
        {
            LOGGER_ERROR(m_serviceProvider)("SoundConverterFFMPEGToOGG::convert_: invalid convert input utf8 to unicode %s"
                , full_input.c_str()
                );

            return false;
        }
                
        WString unicode_output;
        if( Helper::utf8ToUnicode( m_serviceProvider, full_output, unicode_output ) == false )
        {
            LOGGER_ERROR(m_serviceProvider)("SoundConverterFFMPEGToOGG::convert_: invalid convert output utf8 to unicode %s"
                , full_output.c_str()
                );
            
            return false;
        }

        WString buffer = L"ffmpeg.exe -loglevel error -y -threads 4 -i \""  + unicode_input + L"\" -map_metadata -1 -ac 2 -ar 44100 -acodec libvorbis -aq 100 \"" + unicode_output + L"\"";
		
		LOGGER_WARNING(m_serviceProvider)( "SoundDecoderConverterFFMPEGToOGG:: converting file '%ls' to '%ls'"
			, unicode_input.c_str()
			, unicode_output.c_str()
			);

        if( WINDOWSLAYER_SERVICE(m_serviceProvider)
            ->cmd( buffer ) == false )
        {
			LOGGER_ERROR(m_serviceProvider)("SoundConverterFFMPEGToOGG::convert_: invalid convert:"
				);

			return false;
		}

        return true;
	}

开发者ID:irov，项目名称:Mengine，代码行数:58，代码来源:SoundConverterFFMPEGToOGG.cpp

示例20: s_writeAek

	static bool s_writeAek( const WString & _protocolPath, const WString & _xmlPath, const WString & _aekPath )
	{
		String utf8_protocolPath;
		Helper::unicodeToUtf8( serviceProvider, _protocolPath, utf8_protocolPath );

		String utf8_xmlPath;
		Helper::unicodeToUtf8( serviceProvider, _xmlPath, utf8_xmlPath );

		String utf8_aekPath;
		Helper::unicodeToUtf8( serviceProvider, _aekPath, utf8_aekPath );
		
		LOADER_SERVICE( serviceProvider )
			->setProtocolPath( Helper::stringizeString( serviceProvider, utf8_protocolPath ) );
	
		String framePackPath( utf8_xmlPath.c_str(), utf8_xmlPath.size() );

		String::size_type size = framePackPath.size();
		framePackPath[size-3] = L'x';
		framePackPath[size-2] = L'm';
		framePackPath[size-1] = L'l';

		FilePath path_xml = Helper::stringizeString( serviceProvider, framePackPath );

		ConverterOptions options;
		   
		options.pakName = ConstString::none();
		options.inputFileName = path_xml;
		options.outputFileName = Helper::stringizeString(serviceProvider, utf8_aekPath);
		
		ConverterInterfacePtr converter = CONVERTER_SERVICE(serviceProvider)
			->createConverter( Helper::stringizeString(serviceProvider, "xmlToAekMovie") );

		if( converter == nullptr )
		{
			LOGGER_ERROR(serviceProvider)( "writeAek can't create convert '%s'\nfrom: %s\nto: %s\n"
				, "xmlToAekMovie"
				, options.inputFileName.c_str()
				, options.outputFileName.c_str()
				);

			return false;
		}
 
		converter->setOptions( &options );
		
		if( converter->convert() == false )
		{
			LOGGER_ERROR(serviceProvider)( "ConverterEngine::convert can't convert '%s'\nfrom: %s\nto: %s\n"
				, Helper::stringizeString(serviceProvider, "xmlToAekMovie").c_str()
				, options.inputFileName.c_str()
				, options.outputFileName.c_str()
				);
			
			return false;
		}
		
		return true;
	}

开发者ID:irov，项目名称:Mengine，代码行数:58，代码来源:XmlToAekConverter.cpp

注：本文中的LOGGER_ERROR函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LOGGER_WARNING函数代码示例发布时间：2022-05-30

C++ LOGGER函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9670|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ LOGGER_ERROR函数代码示例

示例1: FILE_SERVICE

示例2: write_out_stream

示例3: LOGGER_ERROR

示例4: http_server_init

示例5: msi_kill

示例6: msi_hangup

示例7: toxav_kill_transmission

示例8: init_audio_encoder

示例9: FILE_SERVICE

示例10: LOGGER_ERROR

示例11: LOGGER_ERROR

示例12: ribs_ssl_set_options

示例13: LOGGER_ERROR

示例14: msi_change_capabilities

示例15: LOGGER_ERROR

示例16: LOGGER_ERROR

示例17: LOGGER_ERROR

示例18: vc_reconfigure_encoder

示例19: LOGGER_ERROR

示例20: s_writeAek

请发表评论

全部评论

上一篇：

下一篇：

万里平台汉口会场

lyfeyaj/swipe: Swipe is the most accurat

solegalli/feature-selection-for-machine-

sussillo/hfopt-matlab: A parallel, cpu-b

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053