C++ LOCK_TELEM函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LOCK_TELEM函数的典型用法代码示例。如果您正苦于以下问题：C++ LOCK_TELEM函数的具体用法？C++ LOCK_TELEM怎么用？C++ LOCK_TELEM使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LOCK_TELEM函数的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: lock

nsresult nsCacheEntryDescriptor::
nsInputStreamWrapper::LazyInit()
{
    nsCacheServiceAutoLock lock(LOCK_TELEM(NSINPUTSTREAMWRAPPER_LAZYINIT));

    nsCacheAccessMode mode;
    nsresult rv = mDescriptor->GetAccessGranted(&mode);
    if (NS_FAILED(rv)) return rv;

    NS_ENSURE_TRUE(mode & nsICache::ACCESS_READ, NS_ERROR_UNEXPECTED);

    nsCacheEntry* cacheEntry = mDescriptor->CacheEntry();
    if (!cacheEntry) return NS_ERROR_NOT_AVAILABLE;

    rv = nsCacheService::OpenInputStreamForEntry(cacheEntry, mode,
                                                 mStartOffset,
                                                 getter_AddRefs(mInput));

    CACHE_LOG_DEBUG(("nsInputStreamWrapper::LazyInit "
                      "[entry=%p, wrapper=%p, mInput=%p, rv=%d]",
                      mDescriptor, this, mInput.get(), int(rv)));

    if (NS_FAILED(rv)) return rv;

    mInitialized = true;
    return NS_OK;
}

开发者ID:Type-of-Tool，项目名称:ExMail，代码行数:27，代码来源:nsCacheEntryDescriptor.cpp

示例2: lock

NS_INTERFACE_MAP_END_THREADSAFE

nsresult nsCacheEntryDescriptor::
nsInputStreamWrapper::LazyInit()
{
    // Check if we have the descriptor. If not we can't even grab the cache
    // lock since it is not ensured that the cache service still exists.
    if (!mDescriptor)
        return NS_ERROR_NOT_AVAILABLE;

    nsCacheServiceAutoLock lock(LOCK_TELEM(NSINPUTSTREAMWRAPPER_LAZYINIT));

    nsCacheAccessMode mode;
    nsresult rv = mDescriptor->GetAccessGranted(&mode);
    if (NS_FAILED(rv)) return rv;

    NS_ENSURE_TRUE(mode & nsICache::ACCESS_READ, NS_ERROR_UNEXPECTED);

    nsCacheEntry* cacheEntry = mDescriptor->CacheEntry();
    if (!cacheEntry) return NS_ERROR_NOT_AVAILABLE;

    rv = nsCacheService::OpenInputStreamForEntry(cacheEntry, mode,
                                                 mStartOffset,
                                                 getter_AddRefs(mInput));

    CACHE_LOG_DEBUG(("nsInputStreamWrapper::LazyInit "
                      "[entry=%p, wrapper=%p, mInput=%p, rv=%d]",
                      mDescriptor, this, mInput.get(), int(rv)));

    if (NS_FAILED(rv)) return rv;

    mInitialized = true;
    return NS_OK;
}

开发者ID:JuannyWang，项目名称:gecko-dev，代码行数:34，代码来源:nsCacheEntryDescriptor.cpp

示例3: NS_ENSURE_ARG_POINTER

NS_IMETHODIMP
nsCacheEntryDescriptor::OpenOutputStream(uint32_t offset, nsIOutputStream ** result)
{
    NS_ENSURE_ARG_POINTER(result);

    {
        nsCacheServiceAutoLock lock(LOCK_TELEM(NSCACHEENTRYDESCRIPTOR_OPENOUTPUTSTREAM));
        if (!mCacheEntry)                  return NS_ERROR_NOT_AVAILABLE;
        if (!mCacheEntry->IsStreamData())  return NS_ERROR_CACHE_DATA_IS_NOT_STREAM;

        // ensure valid permissions
        if (!(mAccessGranted & nsICache::ACCESS_WRITE))
            return NS_ERROR_CACHE_WRITE_ACCESS_DENIED;
    }

    nsOutputStreamWrapper* cacheOutput = nullptr;
    int32_t compressionLevel = nsCacheService::CacheCompressionLevel();
    const char *val;
    val = mCacheEntry->GetMetaDataElement("uncompressed-len");
    if ((compressionLevel > 0) && val) {
        cacheOutput = new nsCompressOutputStreamWrapper(this, offset);
    } else {
        // clear compression flag when compression disabled - see bug #715198
        if (val) {
            mCacheEntry->SetMetaDataElement("uncompressed-len", nullptr);
        }
        cacheOutput = new nsOutputStreamWrapper(this, offset);
    }
    if (!cacheOutput) return NS_ERROR_OUT_OF_MEMORY;

    NS_ADDREF(*result = cacheOutput);
    return NS_OK;
}

开发者ID:Type-of-Tool，项目名称:ExMail，代码行数:33，代码来源:nsCacheEntryDescriptor.cpp

示例4: NS_ENSURE_ARG_POINTER

NS_IMETHODIMP
nsCacheEntryDescriptor::OpenInputStream(uint32_t offset, nsIInputStream ** result)
{
    NS_ENSURE_ARG_POINTER(result);

    nsInputStreamWrapper* cacheInput = nullptr;
    {
        nsCacheServiceAutoLock lock(LOCK_TELEM(NSCACHEENTRYDESCRIPTOR_OPENINPUTSTREAM));
        if (!mCacheEntry)                  return NS_ERROR_NOT_AVAILABLE;
        if (!mCacheEntry->IsStreamData())  return NS_ERROR_CACHE_DATA_IS_NOT_STREAM;

        // Don't open any new stream when closing descriptor or clearing entries
        if (mClosingDescriptor || nsCacheService::GetClearingEntries())
            return NS_ERROR_NOT_AVAILABLE;

        // ensure valid permissions
        if (!(mAccessGranted & nsICache::ACCESS_READ))
            return NS_ERROR_CACHE_READ_ACCESS_DENIED;

        const char *val;
        val = mCacheEntry->GetMetaDataElement("uncompressed-len");
        if (val) {
            cacheInput = new nsDecompressInputStreamWrapper(this, offset);
        } else {
            cacheInput = new nsInputStreamWrapper(this, offset);
        }
        if (!cacheInput) return NS_ERROR_OUT_OF_MEMORY;

        mInputWrappers.AppendElement(cacheInput);
    }

    NS_ADDREF(*result = cacheInput);
    return NS_OK;
}

开发者ID:JuannyWang，项目名称:gecko-dev，代码行数:34，代码来源:nsCacheEntryDescriptor.cpp

注：本文中的LOCK_TELEM函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。