• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ LOBYTE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中LOBYTE函数的典型用法代码示例。如果您正苦于以下问题:C++ LOBYTE函数的具体用法?C++ LOBYTE怎么用?C++ LOBYTE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了LOBYTE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: address

  /********************  Mass Storage interface ********************/
  0x09,   /* bLength: Interface Descriptor size */
  0x04,   /* bDescriptorType: */
  MSC_INTERFACE,   /* bInterfaceNumber: Number of Interface */
  0x00,   /* bAlternateSetting: Alternate setting */
  0x02,   /* bNumEndpoints*/
  0x08,   /* bInterfaceClass: MSC Class */
  0x06,   /* bInterfaceSubClass : SCSI transparent*/
  0x50,   /* nInterfaceProtocol */
  0x05,          /* iInterface: */
  /********************  Mass Storage Endpoints ********************/
  0x07,   /*Endpoint descriptor length = 7*/
  0x05,   /*Endpoint descriptor type */
  MSC_IN_EP,   /*Endpoint address (IN, address 1) */
  0x02,   /*Bulk endpoint type */
  LOBYTE(MSC_MAX_PACKET),
  HIBYTE(MSC_MAX_PACKET),
  0x00,   /*Polling interval in milliseconds */
  
  0x07,   /*Endpoint descriptor length = 7 */
  0x05,   /*Endpoint descriptor type */
  MSC_OUT_EP,   /*Endpoint address (OUT, address 1) */
  0x02,   /*Bulk endpoint type */
  LOBYTE(MSC_MAX_PACKET),
  HIBYTE(MSC_MAX_PACKET),
  0x00     /*Polling interval in milliseconds*/
} ;

/* Private function prototypes -----------------------------------------------*/

/*********************************************
开发者ID:MbedTinkerer,项目名称:stmbl,代码行数:31,代码来源:usbd_msc_hid_core.c


示例2: CORE_Process

// Plug-in process
void CORE_Process(int iArg)
{
    try
    {
        char version[16];
        sprintf(version, "%u.%u", HIBYTE(MY_VERSION), LOBYTE(MY_VERSION));
        msg("\n>> WhatAPIs: v: %s, built: %s, By Sirmabus\n", version, __DATE__);
        if (!autoIsOk())
        {
            msg("** Must wait for IDA to finish processing before starting plug-in! **\n*** Aborted ***\n\n");
            return;
        }

        // Show UI
        refreshUI();
        int uiResult = AskUsingForm_c(mainDialog, version, doHyperlink);
        if (!uiResult)
        {
            msg(" - Canceled -\n");
            return;
        }

        WaitBox::show();
        TIMESTAMP startTime = getTimeStamp();

        // Build import segment bounds table
        {
            msg("Import segments:\n");
            refreshUI();
            SEGLIST segList;
            for (int i = 0; i < get_segm_qty(); i++)
            {
                if (segment_t *s = getnseg(i))
                {
                    if (s->type == SEG_XTRN)
                    {
                        char buffer[64] = { "unknown" }; buffer[SIZESTR(buffer)] = 0;
                        get_true_segm_name(s, buffer, SIZESTR(buffer));
                        msg(" [%d] \"%s\" "EAFORMAT" - "EAFORMAT"\n", segmentCount, buffer, s->startEA, s->endEA);
                        BOUNDS b = { s->startEA, s->endEA };
                        segList.push_back(b);
                        segmentCount++;
                    }
                }
            }
            refreshUI();

            // Flatten list into an array for speed
            if (segmentCount)
            {
                UINT size = (segmentCount * sizeof(BOUNDS));
                if (segmentPtr = (BOUNDS *)_aligned_malloc(size, 16))
                {
                    BOUNDS *b = segmentPtr;
                    for (SEGLIST::iterator i = segList.begin(); i != segList.end(); i++, b++)
                    {
                        b->startEA = i->startEA;
                        b->endEA   = i->endEA;
                    }
                }
                else
                {
                    msg("\n*** Allocation failure of %u bytes! ***\n", size);
                    refreshUI();
                }
            }
        }

        if (segmentCount)
        {
            // Make a list of all import names
            if (int moduleCount = get_import_module_qty())
            {
                for (int i = 0; i < moduleCount; i++)
                    enum_import_names(i, importNameCallback);

                char buffer[32];
                msg("Parsed %s module imports.\n", prettyNumberString(moduleCount, buffer));
                refreshUI();
            }

            // Iterate through all functions..
            BOOL aborted = FALSE;
            UINT functionCount = get_func_qty();
            char buffer[32];
            msg("Processing %s functions.\n", prettyNumberString(functionCount, buffer));
            refreshUI();

            for (UINT n = 0; n < functionCount; n++)
            {
                processFunction(getn_func(n));

                if (WaitBox::isUpdateTime())
                {
                    if (WaitBox::updateAndCancelCheck((int)(((float)n / (float)functionCount) * 100.0f)))
                    {
                        msg("* Aborted *\n");
                        break;
                    }
//.........这里部分代码省略.........
开发者ID:nihilus,项目名称:WhatAPIs,代码行数:101,代码来源:Core.cpp


示例3: init_shofixti

RACE_DESC*
init_shofixti (void)
{
    RACE_DESC *RaceDescPtr;

    static RACE_DESC new_shofixti_desc;

    shofixti_desc.postprocess_func = shofixti_postprocess;
    shofixti_desc.init_weapon_func = initialize_standard_missile;
    shofixti_desc.cyborg_control.intelligence_func = shofixti_intelligence;

    new_shofixti_desc = shofixti_desc;
    if (LOBYTE (GLOBAL (CurrentActivity)) == IN_ENCOUNTER
            && !GET_GAME_STATE (SHOFIXTI_RECRUITED))
    {
        // Tanaka/Katana flies in a damaged ship.
#define NUM_LIMPETS 3
        COUNT i;

        new_shofixti_desc.ship_data.ship_rsc[0] = OLDSHOF_BIG_MASK_PMAP_ANIM;
        new_shofixti_desc.ship_data.ship_rsc[1] = OLDSHOF_MED_MASK_PMAP_ANIM;
        new_shofixti_desc.ship_data.ship_rsc[2] = OLDSHOF_SML_MASK_PMAP_ANIM;
        new_shofixti_desc.ship_data.special_rsc[0] = NULL_RESOURCE;
        new_shofixti_desc.ship_data.special_rsc[1] = NULL_RESOURCE;
        new_shofixti_desc.ship_data.special_rsc[2] = NULL_RESOURCE;
        new_shofixti_desc.ship_data.captain_control.captain_rsc =
            OLDSHOF_CAPTAIN_MASK_PMAP_ANIM;

        /* Weapon doesn't work as well */
        new_shofixti_desc.characteristics.weapon_wait = 10;

        /* Simulate VUX limpets */
        for (i = 0; i < NUM_LIMPETS; ++i)
        {
            if (++new_shofixti_desc.characteristics.turn_wait == 0)
                --new_shofixti_desc.characteristics.turn_wait;
            if (++new_shofixti_desc.characteristics.thrust_wait == 0)
                --new_shofixti_desc.characteristics.thrust_wait;
#define MIN_THRUST_INCREMENT DISPLAY_TO_WORLD (1)
            if (new_shofixti_desc.characteristics.thrust_increment <=
                    MIN_THRUST_INCREMENT)
            {
                new_shofixti_desc.characteristics.max_thrust =
                    new_shofixti_desc.characteristics.thrust_increment << 1;
            }
            else
            {
                COUNT num_thrusts;

                num_thrusts = new_shofixti_desc.characteristics.max_thrust /
                              new_shofixti_desc.characteristics.thrust_increment;
                --new_shofixti_desc.characteristics.thrust_increment;
                new_shofixti_desc.characteristics.max_thrust =
                    new_shofixti_desc.characteristics.thrust_increment *
                    num_thrusts;
            }
        }
    }

    RaceDescPtr = &new_shofixti_desc;

    return (RaceDescPtr);
}
开发者ID:seanknox,项目名称:uqm,代码行数:63,代码来源:shofixti.c


示例4: set_tool_item_proc


//.........这里部分代码省略.........
			i |= HOTKEYF_WIN;
		}
		if (ti->virtkey != 0) {
			SendDlgItemMessage(hDlg, IDC_HOTKEY_TOOL, HKM_SETHOTKEY,
				(WPARAM)MAKEWORD(ti->virtkey, i), 0);
		}
		SendMessage(hDlg, WM_COMMAND, IDC_CHECK_MENU, 0);

		SetWindowLong(hDlg, GWL_USERDATA, lParam);
		break;

	case WM_CLOSE:
		EndDialog(hDlg, FALSE);
		break;

	case WM_COMMAND:
		switch (LOWORD(wParam)) {
		case IDC_CHECK_MENU:
			EnableWindow(GetDlgItem(hDlg, IDC_CHECK_COPY_PATE), IsDlgButtonChecked(hDlg, IDC_CHECK_MENU));
			EnableWindow(GetDlgItem(hDlg, IDC_HOTKEY_TOOL), IsDlgButtonChecked(hDlg, IDC_CHECK_MENU));
			break;

		case IDC_BUTTON_FILE_SELECT:
			// ファイル選択
			SetFocus(GetDlgItem(hDlg, IDC_EDIT_LIB_PATH));
			if (file_select(hDlg, TEXT("*.dll\0*.dll\0*.*\0*.*\0\0"), 1, buf) == -1) {
				break;
			}
			SendDlgItemMessage(hDlg, IDC_EDIT_LIB_PATH, WM_SETTEXT, 0, (LPARAM)buf);
			SendDlgItemMessage(hDlg, IDC_EDIT_HEADER, WM_SETTEXT, 0, (LPARAM)TEXT(""));

		case IDC_BUTTON_FUNC_SELECT:
			// ツール選択
			*buf = TEXT('\0');
			SendDlgItemMessage(hDlg, IDC_EDIT_LIB_PATH, WM_GETTEXT, BUF_SIZE - 1, (LPARAM)buf);
			if (DialogBoxParam(hInst, MAKEINTRESOURCE(IDD_DIALOG_SELECT_FUNC), hDlg, select_tool_proc, (LPARAM)buf) == TRUE) {
				SendMessage(hDlg, WM_COMMAND, IDC_CHECK_MENU, 0);
			}
			break;

		case IDOK:
			*buf = TEXT('\0');
			SendDlgItemMessage(hDlg, IDC_EDIT_TITLE, WM_GETTEXT, BUF_SIZE - 1, (LPARAM)buf);
			if (*buf == TEXT('\0')) {
				MessageBox(hDlg, message_get_res(IDS_TOOL_ERR_TITLE), WINDOW_TITLE, MB_ICONEXCLAMATION);
				SetFocus(GetDlgItem(hDlg, IDC_EDIT_TITLE));
				break;
			}

			if ((ti = (TOOL_INFO *)GetWindowLong(hDlg, GWL_USERDATA)) == NULL) {
				ti = mem_calloc(sizeof(TOOL_INFO));
			}
			if (ti != NULL) {
				// 設定取得
				alloc_get_text(GetDlgItem(hDlg, IDC_EDIT_TITLE), &ti->title);
				alloc_get_text(GetDlgItem(hDlg, IDC_EDIT_LIB_PATH), &ti->lib_file_path);
				alloc_get_text(GetDlgItem(hDlg, IDC_EDIT_HEADER), &ti->func_name);
				alloc_get_text(GetDlgItem(hDlg, IDC_EDIT_CMD_LINE), &ti->cmd_line);
				
				ti->call_type = 0;
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_MENU) * CALLTYPE_MENU);
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_VIEWER) * CALLTYPE_VIEWER);
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_VIEWER_OPEN) * CALLTYPE_VIEWER_OPEN);
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_VIEWER_CLOSE) * CALLTYPE_VIEWER_CLOSE);
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_HISTORY) * CALLTYPE_ADD_HISTORY);
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_CLIPBOARD) * CALLTYPE_ITEM_TO_CLIPBOARD);
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_START) * CALLTYPE_START);
				ti->call_type |= (IsDlgButtonChecked(hDlg, IDC_CHECK_END) * CALLTYPE_END);

				ti->copy_paste = IsDlgButtonChecked(hDlg, IDC_CHECK_COPY_PATE);
				ti->old = IsDlgButtonChecked(hDlg, IDC_CHECK_OLD);

				i = SendDlgItemMessage(hDlg, IDC_HOTKEY_TOOL, HKM_GETHOTKEY, 0, 0);
				ti->virtkey = LOBYTE(i);
				i = HIBYTE(i);
				ti->modifiers = ((i & HOTKEYF_SHIFT) ? MOD_SHIFT : 0) |
					((i & HOTKEYF_CONTROL) ? MOD_CONTROL : 0) |
					((i & HOTKEYF_ALT) ? MOD_ALT : 0) |
					((i & HOTKEYF_WIN) ? MOD_WIN : 0);
			}

			if (GetWindowLong(hDlg, GWL_USERDATA) == 0) {
				// 新規
				HWND pWnd = PropSheet_GetCurrentPageHwnd(GetParent(hDlg));
				listview_set_tool(GetDlgItem(pWnd, IDC_LIST_TOOL), ti, FALSE);
			}
			EndDialog(hDlg, TRUE);
			break;

		case IDCANCEL:
			EndDialog(hDlg, FALSE);
			break;
		}
		break;

	default:
		return FALSE;
	}
	return TRUE;
}
开发者ID:tobynet,项目名称:clcl,代码行数:101,代码来源:SetTool.c


示例5: getEepeomParameter

//-------------------------------------------------------------------------------------------------
//  Public Functions
//-------------------------------------------------------------------------------------------------
static ST_EEPROM_PARA getEepeomParameter(ST_EEPROM_ID EepromType,MS_U16 offset)
{
    ST_EEPROM_PARA stEtype;
    u16 u16Tmp = 0;
   
    switch(EepromType.type)
    {
        case EEPROM_24C01:    
        case EEPROM_24C02:
            stEtype.u16SlaveIDAddr=EepromType.u16DeviceAddr;
            stEtype.u8AddrCnt=1;
            stEtype.pu8Offset[0]=LOBYTE(offset);
            stEtype.u8PageSize=8;
            break;
        case EEPROM_24C04:
            u16Tmp=((HIBYTE(offset)&0x1)<<1);          
            stEtype.u16SlaveIDAddr=(EepromType.u16DeviceAddr|u16Tmp);
            stEtype.u8AddrCnt=1;
            stEtype.pu8Offset[0]=LOBYTE(offset);
            stEtype.u8PageSize=16;            
            break;
        case EEPROM_24C08:
            u16Tmp=((HIBYTE(offset)&0x3)<<1);          
            stEtype.u16SlaveIDAddr=(EepromType.u16DeviceAddr|u16Tmp);
            stEtype.u8AddrCnt=1;
            stEtype.pu8Offset[0]=LOBYTE(offset);
            stEtype.u8PageSize=16;                        
            break;
        case EEPROM_24C16:
            u16Tmp=((HIBYTE(offset)&0x7)<<1);          
            stEtype.u16SlaveIDAddr=(EepromType.u16DeviceAddr|u16Tmp);
            stEtype.u8AddrCnt=1;
            stEtype.pu8Offset[0]=LOBYTE(offset);
            stEtype.u8PageSize=16;              
            break;            
        case EEPROM_24C32:            
        case EEPROM_24C64:            
            stEtype.u8PageSize=32;              
            stEtype.u16SlaveIDAddr=EepromType.u16DeviceAddr;
            stEtype.u8AddrCnt=2;
            stEtype.pu8Offset[0]=HIBYTE(offset);
            stEtype.pu8Offset[1]=LOBYTE(offset);            
            break;
        case EEPROM_24C128:
        case EEPROM_24C256:
            stEtype.u8PageSize=64;              
            stEtype.u16SlaveIDAddr=EepromType.u16DeviceAddr;
            stEtype.u8AddrCnt=2;
            stEtype.pu8Offset[0]=HIBYTE(offset);
            stEtype.pu8Offset[1]=LOBYTE(offset);                
            break;
        case EEPROM_24C512:
            stEtype.u8PageSize=128;              
            stEtype.u16SlaveIDAddr=EepromType.u16DeviceAddr;
            stEtype.u8AddrCnt=2;
            stEtype.pu8Offset[0]=HIBYTE(offset);
            stEtype.pu8Offset[1]=LOBYTE(offset);                
        case EEPROM_24C1024:            
            stEtype.u8PageSize=256;              
            stEtype.u16SlaveIDAddr=EepromType.u16DeviceAddr;
            stEtype.u8AddrCnt=2;
            stEtype.pu8Offset[0]=HIBYTE(offset);
            stEtype.pu8Offset[1]=LOBYTE(offset);                
            break;
        default:
            UBOOT_ERROR("Wrong Eeprom Type!!\n");
            break;
    }
    return stEtype;
}
开发者ID:Scorpio92,项目名称:mstar6a918,代码行数:73,代码来源:MsEeprom.c


示例6: ImmEscapeW

LRESULT WINAPI ImmEscapeW(
    HKL    hKL,
    HIMC   hImc,
    UINT   uSubFunc,
    LPVOID lpData)
{
    PIMEDPI pImeDpi;
    LRESULT lRet = 0;

    pImeDpi = FindOrLoadImeDpi(hKL);
    if (pImeDpi == NULL) {
        RIPMSG0(RIP_WARNING, "ImmEscapeW: no pImeDpi entry.");
        return lRet;
    }

    if ((pImeDpi->ImeInfo.fdwProperty & IME_PROP_UNICODE) || lpData == NULL) {
        /*
         * Doesn't need W/A conversion. Calls directly to IME to
         * bring up the configuration dialogbox.
         */
        lRet = (*pImeDpi->pfn.ImeEscape)(hImc, uSubFunc, lpData);
        ImmUnlockImeDpi(pImeDpi);
        return lRet;
    }

    /*
     * Unicode caller, ANSI IME. Needs W/A conversion depending on
     * uSubFunc.
     */
    switch (uSubFunc) {
    case IME_ESC_GET_EUDC_DICTIONARY:
    case IME_ESC_IME_NAME:
        {
            CHAR szData[IME_T_EUDC_DIC_SIZE];
            INT  i;

            lRet = ImmEscapeA(hKL, hImc, uSubFunc, (LPVOID)szData);

            if (lRet != 0) {

                try {
                    i = MultiByteToWideChar(CP_ACP,
                                            (DWORD)MB_PRECOMPOSED,
                                            (LPSTR)szData,          // src
                                            (INT)strlen(szData),
                                            (LPWSTR)lpData,         // dest
                                            (INT)IME_T_EUDC_DIC_SIZE);
                    ((LPWSTR)lpData)[i] = L'\0';
                }
                except (EXCEPTION_EXECUTE_HANDLER) {
                    lRet = 0;
                }
            }

            break;
        }

    case IME_ESC_SET_EUDC_DICTIONARY:
    case IME_ESC_HANJA_MODE:
        {
            CHAR szData[IME_T_EUDC_DIC_SIZE];
            BOOL bUDC;
            INT  i;

            i = WideCharToMultiByte( CP_ACP,
                                    (DWORD)0,
                                    (LPWSTR)lpData,          // src
                                    (INT)wcslen(lpData),
                                    (LPSTR)szData,          // dest
                                    (INT)sizeof(szData),
                                    (LPSTR)NULL,
                                    (LPBOOL)&bUDC);
            szData[i] = '\0';

            lRet = ImmEscapeA(hKL, hImc, uSubFunc, (LPVOID)szData);

            break;
        }

    case IME_ESC_SEQUENCE_TO_INTERNAL:
        {
            CHAR    szData[4];
            WCHAR   wszData[4];
            INT     i = 0;

            lRet = ImmEscapeA(hKL, hImc, uSubFunc, lpData);

            if (HIBYTE(LOWORD(lRet)))
                szData[i++] = HIBYTE(LOWORD(lRet));

            if (LOBYTE(LOWORD(lRet)))
                szData[i++] = LOBYTE(LOWORD(lRet));

            i = MultiByteToWideChar(CP_ACP,
                                    (DWORD)MB_PRECOMPOSED,
                                    (LPSTR)szData,            // src
                                    i,
                                    (LPWSTR)wszData,          // dest
                                    (INT)sizeof(wszData)/sizeof(WCHAR));

//.........这里部分代码省略.........
开发者ID:Gaikokujin,项目名称:WinNT4,代码行数:101,代码来源:immime.c


示例7: PackCommRqtEx

static int
PackCommRqtEx(unsigned char* pAppBuf, int nAppBufLen, PBYTE pSA, PBYTE pDA, BOOL bNeedRsp, unsigned char nSeq, unsigned char* pFrm)
{
	int				nFrmLen	= 0;
	int				nLenPos	= OFFSET_COM_LY_PACKAGE_LEN;
//	unsigned int	nSeq	= GetNextRqtSeq();
	unsigned short  usChk = 0;
	int i = 0;
	// STX
	*(pFrm + nFrmLen + 1) = BACP_COM_LY_STX_B0;
	*(pFrm + nFrmLen + 0) = BACP_COM_LY_STX_B1;

	nFrmLen += LEN_COM_STX;
	// VER
	*(pFrm + nFrmLen) = CURRENT_COM_NET_LAY_VER;
	nFrmLen += LEN_COM_VER;

	// LEN
	nFrmLen += LEN_COM_LEN;

	// SEQ

	*(pFrm + nFrmLen + 0) = nSeq;
			
	nFrmLen += LEN_COM_SEQ;


	// OPT
	if (bNeedRsp)
	{
		*(pFrm + nFrmLen) = COM_LY_OPT_REQ_ON ;
	}
	else
	{
		*(pFrm + nFrmLen) = COM_LY_OPT_REQ_OFF ;
	}
	nFrmLen += LEN_COM_OPT; 

	memcpy(pFrm + nFrmLen, pDA, 3);
	nFrmLen += LEN_COM_DA;

	memcpy(pFrm + nFrmLen, pSA, 3);
	nFrmLen += LEN_COM_SA;
	// APP
	memcpy((pFrm + nFrmLen), pAppBuf, nAppBufLen);
	nFrmLen += nAppBufLen;
	
	// check num
	nFrmLen += 2;

	// ETX
	*(pFrm + nFrmLen + 1) = BACP_COM_LY_ETX_B0;
	*(pFrm + nFrmLen + 0) = BACP_COM_LY_ETX_B1;

	nFrmLen += LEN_COM_ETX;

	// Fill LEN 
	*(pFrm + nLenPos + 1) = LOBYTE(nFrmLen);
	*(pFrm + nLenPos + 0) = HIBYTE(nFrmLen);


	usChk = 0;
	for (i = LEN_COM_STX; i < nFrmLen - 4; i++)
	{
		usChk += *(pFrm + i);
	}

	*(pFrm + nFrmLen - 3) = LOBYTE(usChk);
	*(pFrm + nFrmLen - 4) = HIBYTE(usChk);

	return nFrmLen;
}
开发者ID:SkyChen2012,项目名称:GMApp,代码行数:72,代码来源:LCAPro_mox_V2.c


示例8: modData

/**************************************************************************
 * 			modData					[internal]
 */
static DWORD modData(WORD wDevID, DWORD dwParam)
{
    BYTE	evt = LOBYTE(LOWORD(dwParam));
    BYTE	d1  = HIBYTE(LOWORD(dwParam));
    BYTE	d2  = LOBYTE(HIWORD(dwParam));
    
    TRACE("(%04X, %08lX);\n", wDevID, dwParam);

    if (wDevID >= MODM_NumDevs) return MMSYSERR_BADDEVICEID;
    if (!MidiOutDev[wDevID].bEnabled) return MIDIERR_NODEVICE;

    if (midiSeq == NULL) {
	WARN("can't play !\n");
	return MIDIERR_NODEVICE;
    }
    switch (MidiOutDev[wDevID].caps.wTechnology) {
    case MOD_SYNTH:
    case MOD_MIDIPORT:
	{
	    int handled = 1; /* Assume event is handled */
            snd_seq_event_t event;
            snd_seq_ev_clear(&event);
            snd_seq_ev_set_direct(&event);
            snd_seq_ev_set_source(&event, port_out);
            snd_seq_ev_set_dest(&event, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port);
	    
	    switch (evt & 0xF0) {
	    case MIDI_CMD_NOTE_OFF:
		snd_seq_ev_set_noteoff(&event, evt&0x0F, d1, d2);
		break;
	    case MIDI_CMD_NOTE_ON:
		snd_seq_ev_set_noteon(&event, evt&0x0F, d1, d2);
		break;
	    case MIDI_CMD_NOTE_PRESSURE:
		snd_seq_ev_set_keypress(&event, evt&0x0F, d1, d2);
		break;
	    case MIDI_CMD_CONTROL:
		snd_seq_ev_set_controller(&event, evt&0x0F, d1, d2);
		break;
	    case MIDI_CMD_BENDER:
		snd_seq_ev_set_pitchbend(&event, evt&0x0F, ((WORD)d2 << 7 | (WORD)d1) - 0x2000);
		break;
	    case MIDI_CMD_PGM_CHANGE:
		snd_seq_ev_set_pgmchange(&event, evt&0x0F, d1);
		break;
	    case MIDI_CMD_CHANNEL_PRESSURE:
		snd_seq_ev_set_chanpress(&event, evt&0x0F, d1);
		break;
	    case MIDI_CMD_COMMON_SYSEX:
		switch (evt & 0x0F) {
		case 0x00:	/* System Exclusive, don't do it on modData,
				 * should require modLongData*/
		case 0x01:	/* Undefined */
		case 0x04:	/* Undefined. */
		case 0x05:	/* Undefined. */
		case 0x07:	/* End of Exclusive. */
		case 0x09:	/* Undefined. */
		case 0x0D:	/* Undefined. */
		    handled = 0;
		    break;
		case 0x06:	/* Tune Request */
		case 0x08:	/* Timing Clock. */
		case 0x0A:	/* Start. */
		case 0x0B:	/* Continue */
		case 0x0C:	/* Stop */
		case 0x0E: 	/* Active Sensing. */
		    /* FIXME: Is this function suitable for these purposes
		       (and also Song Select and Song Position Pointer) */
	            snd_seq_ev_set_sysex(&event, 1, &evt);
		    break;
		case 0x0F: 	/* Reset */
				/* snd_seq_ev_set_sysex(&event, 1, &evt);
				   this other way may be better */
		    {
			BYTE reset_sysex_seq[] = {MIDI_CMD_COMMON_SYSEX, 0x7e, 0x7f, 0x09, 0x01, 0xf7};
			snd_seq_ev_set_sysex(&event, sizeof(reset_sysex_seq), reset_sysex_seq);
		    }
		    break;
		case 0x03:	/* Song Select. */
		    {
			BYTE buf[2];
			buf[0] = evt;
			buf[1] = d1;
			snd_seq_ev_set_sysex(&event, sizeof(buf), buf);
	            }
	            break;
		case 0x02:	/* Song Position Pointer. */
		    {
			BYTE buf[3];
			buf[0] = evt;
			buf[1] = d1;
			buf[2] = d2;
			snd_seq_ev_set_sysex(&event, sizeof(buf), buf);
	            }
		    break;
		}
		break;
//.........这里部分代码省略.........
开发者ID:howard5888,项目名称:wineT,代码行数:101,代码来源:midi.c


示例9: main

/**
 * main
 * 
 * executable entry point
 */
INT __cdecl main( INT argc, CHAR **argv ) 
{
    /* local variables */
    int err;
    int i,j;
    WORD wVersionRequested;
    WSADATA wsaData;
    DWORD dwSocketError;

    SOCKET sock = INVALID_SOCKET;


    /* PAL initialization */
    if( (PAL_Initialize(argc, argv)) != 0 )
    {
        return( FAIL );
    }

    /* try to cleanup the winsock library -- should fail */
    /* since we haven't initialized it yet */
    err = WSACleanup();
    if( err == 0 )
    {
        Fail(   "WSACleanup call succeeded before call to WSAStartup\n" );
    }
    
    /* check the socket-specific error code */    
    dwSocketError = GetLastError();
    if( dwSocketError != WSANOTINITIALISED )
    {
        Fail(   "WSACleanup call does not return WSANOTINITIALISED "
                "before successful call to WSAStartup\n" );
    }


    /* initialize winsock version 2.2 */
    wVersionRequested = MAKEWORD( 2, 2 );
    
    for(i=0;i<5;i++)
    {
        err = WSAStartup( wVersionRequested, &wsaData );
        if( err != 0 )
        {            
            for(j=0;j<i;j++)
            {
                err = WSACleanup();
                if( err != 0 )
                {
                    /* check the socket-specific error code */    
                    dwSocketError = GetLastError();
                    Trace(   "WSACleanup call fails with error code %d\n",
                            dwSocketError ); 
                }
            }
            Fail( "Unexpected WSAStartup call failed with error code %d\n", 
                err ); 
        }

        /* Confirm that the WinSock DLL supports the specified version. */
        if( LOBYTE( wsaData.wVersion ) != 2 ||
            HIBYTE( wsaData.wVersion ) != 2 )
        {
            /* Tell the user that we could not find a usable winsock DLL. */
            Trace( "Requested winsock version unsupported, "
                    "returned version %d.%d\n",
                    LOBYTE( wsaData.wVersion ),
                    HIBYTE( wsaData.wVersion ) ); 

            for(j=0;j<=i;j++)
            {
                err = WSACleanup();
                if( err != 0 )
                {
                    /* check the socket-specific error code */    
                    dwSocketError = GetLastError();
                    Trace(   "WSACleanup call fails with error code %d\n",
                            dwSocketError ); 
                }
            }
            
            return( FAIL );
        }
    }

    for(i=0;i<4;i++)
    {
        /* try to cleanup the winsock library -- should succeed now */
        err = WSACleanup();
        if( err != 0 )
        {
            /* check the socket-specific error code */    
            dwSocketError = GetLastError();
            Fail(   "WSACleanup call fails with error code %d\n",
                    dwSocketError ); 
        }
//.........这里部分代码省略.........
开发者ID:ArildF,项目名称:masters,代码行数:101,代码来源:test1.c


示例10: USBD_StdEPReq

/**
* @brief  USBD_StdEPReq
*         Handle standard usb endpoint requests
* @param  pdev: USB OTG device instance
* @param  req: usb request
* @retval status
*/
USBD_Status  USBD_StdEPReq (USB_OTG_CORE_HANDLE  *pdev, USB_SETUP_REQ  *req)
{

  uint8_t   ep_addr;
  USBD_Status ret = USBD_OK;

  ep_addr  = LOBYTE(req->wIndex);

  switch (req->bRequest)
  {

  case USB_REQ_SET_FEATURE :

    switch (pdev->dev.device_status)
    {
    case USB_OTG_ADDRESSED:
      if ((ep_addr != 0x00) && (ep_addr != 0x80))
      {
        DCD_EP_Stall(pdev , ep_addr);
      }
      break;

    case USB_OTG_CONFIGURED:
      if (req->wValue == USB_FEATURE_EP_HALT)
      {
        if ((ep_addr != 0x00) && (ep_addr != 0x80))
        {
          DCD_EP_Stall(pdev , ep_addr);

        }
      }
      pdev->dev.class_cb->Setup (pdev, req);
      USBD_CtlSendStatus(pdev);

      break;

    default:
      USBD_CtlError(pdev , req);
      break;
    }
    break;

  case USB_REQ_CLEAR_FEATURE :

    switch (pdev->dev.device_status)
    {
    case USB_OTG_ADDRESSED:
      if ((ep_addr != 0x00) && (ep_addr != 0x80))
      {
        DCD_EP_Stall(pdev , ep_addr);
      }
      break;

    case USB_OTG_CONFIGURED:
      if (req->wValue == USB_FEATURE_EP_HALT)
      {
        if ((ep_addr != 0x00) && (ep_addr != 0x80))
        {
          DCD_EP_ClrStall(pdev , ep_addr);
          pdev->dev.class_cb->Setup (pdev, req);
        }
        USBD_CtlSendStatus(pdev);
      }
      break;

    default:
       USBD_CtlError(pdev , req);
      break;
    }
    break;

  case USB_REQ_GET_STATUS:
    switch (pdev->dev.device_status)
    {
    case USB_OTG_ADDRESSED:
      if ((ep_addr != 0x00) && (ep_addr != 0x80))
      {
        DCD_EP_Stall(pdev , ep_addr);
      }
      break;

    case USB_OTG_CONFIGURED:


      if ((ep_addr & 0x80)== 0x80)
      {
        if(pdev->dev.in_ep[ep_addr & 0x7F].is_stall)
        {
          USBD_ep_status = 0x0001;
        }
        else
        {
          USBD_ep_status = 0x0000;
//.........这里部分代码省略.........
开发者ID:fl04t,项目名称:codec2,代码行数:101,代码来源:usbd_req.c


示例11: TestSuite_PrintJsonHeader

static void
TestSuite_PrintJsonHeader (TestSuite *suite, /* IN */
                           FILE *stream)     /* IN */
{
#ifdef _WIN32
#  define INFO_BUFFER_SIZE 32767

   SYSTEM_INFO si;
   DWORD version = 0;
   DWORD major_version = 0;
   DWORD minor_version = 0;
   DWORD build = 0;

   GetSystemInfo(&si);
   version = GetVersion();

   major_version = (DWORD)(LOBYTE(LOWORD(version)));
   minor_version = (DWORD)(HIBYTE(LOWORD(version)));

   if (version < 0x80000000) {
      build = (DWORD)(HIWORD(version));
   }

   fprintf (stream,
            "{\n"
            "  \"host\": {\n"
            "    \"sysname\": \"Windows\",\n"
            "    \"release\": \"%ld.%ld (%ld)\",\n"
            "    \"machine\": \"%ld\",\n"
            "    \"memory\": {\n"
            "      \"pagesize\": %ld,\n"
            "      \"npages\": %d\n"
            "    }\n"
            "  },\n"
            "  \"options\": {\n"
            "    \"parallel\": \"%s\",\n"
            "    \"fork\": \"%s\"\n"
            "  },\n"
            "  \"tests\": [\n",
            major_version, minor_version, build,
            si.dwProcessorType,
            si.dwPageSize,
            0,
            (suite->flags & TEST_NOTHREADS) ? "false" : "true",
            (suite->flags & TEST_NOFORK) ? "false" : "true");
#else
   struct utsname u;
   uint64_t pagesize;
   uint64_t npages = 0;

   ASSERT (suite);

   if (uname (&u) == -1) {
      perror ("uname()");
      return;
   }

   pagesize = sysconf (_SC_PAGE_SIZE);

#  if defined(_SC_PHYS_PAGES)
   npages = sysconf (_SC_PHYS_PAGES);
#  endif

   fprintf (stream,
            "{\n"
            "  \"host\": {\n"
            "    \"sysname\": \"%s\",\n"
            "    \"release\": \"%s\",\n"
            "    \"machine\": \"%s\",\n"
            "    \"memory\": {\n"
            "      \"pagesize\": %"PRIu64",\n"
            "      \"npages\": %"PRIu64"\n"
            "    }\n"
            "  },\n"
            "  \"options\": {\n"
            "    \"parallel\": \"%s\",\n"
            "    \"fork\": \"%s\"\n"
            "  },\n"
            "  \"tests\": [\n",
            u.sysname,
            u.release,
            u.machine,
            pagesize,
            npages,
            (suite->flags & TEST_NOTHREADS) ? "false" : "true",
            (suite->flags & TEST_NOFORK) ? "false" : "true");
#endif

   fflush (stream);
}
开发者ID:duzhanyuan,项目名称:SequoiaDB,代码行数:90,代码来源:TestSuite.c


示例12: keyDownCallback

static JSValueRef keyDownCallback(JSContextRef context, JSObjectRef function, JSObjectRef thisObject, size_t argumentCount, const JSValueRef arguments[], JSValueRef* exception)
{
    if (argumentCount < 1)
        return JSValueMakeUndefined(context);

    static const JSStringRef lengthProperty = JSStringCreateWithUTF8CString("length");

    COMPtr<IWebFramePrivate> framePrivate;
    if (SUCCEEDED(frame->QueryInterface(&framePrivate)))
        framePrivate->layout();
    
    JSStringRef character = JSValueToStringCopy(context, arguments[0], exception);
    ASSERT(!*exception);
    int virtualKeyCode;
    int charCode = 0;
    int keyData = 1;
    bool needsShiftKeyModifier = false;
    if (JSStringIsEqualToUTF8CString(character, "leftArrow")) {
        virtualKeyCode = VK_LEFT;
        keyData += KF_EXTENDED << 16; // In this case, extended means "not keypad".
    } else if (JSStringIsEqualToUTF8CString(character, "rightArrow")) {
        virtualKeyCode = VK_RIGHT;
        keyData += KF_EXTENDED << 16;
    } else if (JSStringIsEqualToUTF8CString(character, "upArrow")) {
        virtualKeyCode = VK_UP;
        keyData += KF_EXTENDED << 16;
    } else if (JSStringIsEqualToUTF8CString(character, "downArrow")) {
        virtualKeyCode = VK_DOWN;
        keyData += KF_EXTENDED << 16;
    } else if (JSStringIsEqualToUTF8CString(character, "pageUp"))
        virtualKeyCode = VK_PRIOR;
    else if (JSStringIsEqualToUTF8CString(character, "pageDown"))
        virtualKeyCode = VK_NEXT;
    else if (JSStringIsEqualToUTF8CString(character, "home"))
        virtualKeyCode = VK_HOME;
    else if (JSStringIsEqualToUTF8CString(character, "end"))
        virtualKeyCode = VK_END;
    else if (JSStringIsEqualToUTF8CString(character, "insert"))
        virtualKeyCode = VK_INSERT;
    else if (JSStringIsEqualToUTF8CString(character, "delete"))
        virtualKeyCode = VK_DELETE;
    else if (JSStringIsEqualToUTF8CString(character, "printScreen"))
        virtualKeyCode = VK_SNAPSHOT;
    else if (JSStringIsEqualToUTF8CString(character, "menu"))
        virtualKeyCode = VK_APPS;
    else if (JSStringIsEqualToUTF8CString(character, "leftControl"))
        virtualKeyCode = VK_LCONTROL;
    else if (JSStringIsEqualToUTF8CString(character, "leftShift"))
        virtualKeyCode = VK_LSHIFT;
    else if (JSStringIsEqualToUTF8CString(character, "leftAlt"))
        virtualKeyCode = VK_LMENU;
    else if (JSStringIsEqualToUTF8CString(character, "rightControl"))
        virtualKeyCode = VK_RCONTROL;
    else if (JSStringIsEqualToUTF8CString(character, "rightShift"))
        virtualKeyCode = VK_RSHIFT;
    else if (JSStringIsEqualToUTF8CString(character, "rightAlt"))
        virtualKeyCode = VK_RMENU;
    else {
        charCode = JSStringGetCharactersPtr(character)[0];
        virtualKeyCode = LOBYTE(VkKeyScan(charCode));
        if (WTF::isASCIIUpper(charCode))
            needsShiftKeyModifier = true;
    }
    JSStringRelease(character);

    BYTE keyState[256];
    if (argumentCount > 1 || needsShiftKeyModifier) {
        ::GetKeyboardState(keyState);

        BYTE newKeyState[256];
        memcpy(newKeyState, keyState, sizeof(keyState));

        if (needsShiftKeyModifier)
            newKeyState[VK_SHIFT] = 0x80;

        if (argumentCount > 1) {
            JSObjectRef modifiersArray = JSValueToObject(context, arguments[1], 0);
            if (modifiersArray) {
                int modifiersCount = JSValueToNumber(context, JSObjectGetProperty(context, modifiersArray, lengthProperty, 0), 0);
                for (int i = 0; i < modifiersCount; ++i) {
                    JSValueRef value = JSObjectGetPropertyAtIndex(context, modifiersArray, i, 0);
                    JSStringRef string = JSValueToStringCopy(context, value, 0);
                    if (JSStringIsEqualToUTF8CString(string, "ctrlKey") || JSStringIsEqualToUTF8CString(string, "addSelectionKey"))
                        newKeyState[VK_CONTROL] = 0x80;
                    else if (JSStringIsEqualToUTF8CString(string, "shiftKey") || JSStringIsEqualToUTF8CString(string, "rangeSelectionKey"))
                        newKeyState[VK_SHIFT] = 0x80;
                    else if (JSStringIsEqualToUTF8CString(string, "altKey"))
                        newKeyState[VK_MENU] = 0x80;

                    JSStringRelease(string);
                }
            }
        }

        ::SetKeyboardState(newKeyState);
    }

    MSG msg = makeMsg(webViewWindow, (::GetKeyState(VK_MENU) & 0x8000) ? WM_SYSKEYDOWN : WM_KEYDOWN, virtualKeyCode, keyData);
    if (virtualKeyCode != 255)
        dispatchMessage(&msg);
//.........这里部分代码省略.........
开发者ID:Spencerx,项目名称:webkit,代码行数:101,代码来源:EventSender.cpp


示例13: main

int __cdecl main(int argc, char *argv[])
{
    WORD VersionRequested = MAKEWORD(2,2);
    WSADATA WsaData;
    int err;
    int socketID;
    struct sockaddr_in mySockaddr;

    /*set the backlog number*/
    const int BacklogNumber = 10;

    /*Initialize the PAL environment*/
    err = PAL_Initialize(argc, argv);
    if(0 != err)
    {
        return FAIL;
    }

    /*initialize to use winsock2.dll*/
    err = WSAStartup(VersionRequested,&WsaData);
    if(err != 0)
    {
        Fail("\nFailed to find a usable WinSock DLL!\n");
    }

    /*Confirm that the WinSock DLL supports 2.2.*/
    if(LOBYTE( WsaData.wVersion ) != 2 ||
            HIBYTE( WsaData.wVersion ) != 2)
    {
        Trace("\nFailed to find a usable WinSock DLL!\n");
        err = WSACleanup();
        if(SOCKET_ERROR == err)
        {
            Trace("\nFailed to call WSACleanup API!\n");
        }
        Fail("");
    }

    /*create a datagram socket in AF_INET domain*/
    socketID = socket(AF_INET,SOCK_DGRAM,0);
    if(INVALID_SOCKET == socketID)
    {
        Trace("\nFailed to call socket API to create a stream socket!\n");
        err = WSACleanup();
        if(SOCKET_ERROR == err)
        {
            Trace("\nFailed to call WSACleanup API!\n");
        }
        Fail("");
    }

    /*prepare the sockaddr structure*/
    mySockaddr.sin_family = AF_INET;
    mySockaddr.sin_port = 0;
    mySockaddr.sin_addr.S_un.S_addr = INADDR_ANY;
    memset( &(mySockaddr.sin_zero), 0, 8);

    /*bind local address to a socket*/
    err = bind(socketID,(struct sockaddr *)&mySockaddr,sizeof(struct sockaddr));
    if(SOCKET_ERROR == err)
    {
        Trace("\nFailed to call bind API to bind a socket with "
                "local address!\n");
        err = closesocket(socketID);
        if(SOCKET_ERROR == err)
        {    
            Trace("\nFailed to call closesocket API!\n");
        }
        err = WSACleanup();
        if(SOCKET_ERROR == err)
        {
            Trace("\nFailed to call WSACleanup API!\n");
        }
        Fail("");
    }

    /*to setup the backlog number for a datagram socket*/
    err = listen(socketID,BacklogNumber);
    if(WSAEOPNOTSUPP != GetLastError() || SOCKET_ERROR != err)
    {
        Trace("\nFailed to call listen API for a negative test, "
                "setup backlog number for a datagram socket!\n");
        err = closesocket(socketID);
        if(SOCKET_ERROR == err)
        {    
            Trace("\nFailed to call closesocket API!\n");
        }
        err = WSACleanup();
        if(SOCKET_ERROR == err)
        {
            Trace("\nFailed to call WSACleanup API!\n");
        }
        Fail("");
    }

    err = closesocket(socketID);
    if(SOCKET_ERROR == err)
    {
        Trace("\nFailed to call closesocket API!\n");
        err = WSACleanup();
//.........这里部分代码省略.........
开发者ID:smartmaster,项目名称:sscli,代码行数:101,代码来源:listen_neg.c


示例14: m_bWinXPOrLater

CCherryNotificationDialog::CCherryNotificationDialog()
:
m_bWinXPOrLater(IsWindowsVersionOrGreater(HIBYTE(_WIN32_WINNT_WINXP), LOBYTE(_WIN32_WINNT_WINXP), 0))
{
	Initialize();
}
开发者ID:ogoons,项目名称:CherryLib,代码行数:6,代码来源:CherryNotificationDialog.cpp


示例15: listen_tcp

// Listen to incoming TCP requests. Supply the port you want the server to listen on
int listen_tcp(int host_port) {

	// adapted from: http://www.tidytutorials.com/2009/12/c-winsock-example-using-client-server.html

	int err = 0;

    // Initialize socket support WINDOWS ONLY!
    unsigned short wVersionRequested;
    WSADATA wsaData;
    wVersionRequested = MAKEWORD(2, 2);
    err = WSAStartup(wVersionRequested, &wsaData);
    if (err != 0 || (LOBYTE(wsaData.wVersion) != 2 ||
            HIBYTE(wsaData.wVersion) != 2)) {
        fprintf(stderr, "Could not find useable sock dll %d\n", WSAGetLastError());
        goto FINISH;
    }

    // Initialize sockets and set any options
    int hsock;
    int* p_int ;
    hsock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
    if (hsock == -1) {
        printf("Error initializing socket %d\n", WSAGetLastError());
        goto FINISH;
    }
    
    p_int = (int*)malloc(sizeof(int));
    *p_int = 1;
    if ((setsockopt(hsock, SOL_SOCKET, SO_REUSEADDR, (char*)p_int, sizeof(int)) == -1)||
        (setsockopt(hsock, SOL_SOCKET, SO_KEEPALIVE, (char*)p_int, sizeof(int)) == -1)) {
        printf("Error setting options %d\n", WSAGetLastError());
        free(p_int);
        goto FINISH;
    }
    free(p_int);

    // Bind and listen
    struct sockaddr_in my_addr;

    my_addr.sin_family = AF_INET ;
    my_addr.sin_port = htons(host_port);
    
    memset(&(my_addr.sin_zero), 0, 8);
    my_addr.sin_addr.s_addr = INADDR_ANY ;
    
    if (bind(hsock, (struct sockaddr*)&my_addr, sizeof(my_addr)) != 0) {
        fprintf(stderr,"Error binding to socket, make sure nothing else is listening on port %d\n", WSAGetLastError());
        goto FINISH;
    }
    if (listen(hsock, 10) != 0) {
        fprintf(stderr, "Error listening %d\n", WSAGetLastError());
        goto FINISH;
    }
    
	// wait for connections

    int* csock;
    sockaddr_in sadr;
    int addr_size = sizeof(SOCKADDR);
    
    while (true) {
        printf("Listening for a TCP connection on port %d\n", host_port);
        csock = (int*)malloc(sizeof(int));
        
        if ((*csock = accept(hsock, (SOCKADDR*)&sadr, &addr_size)) != INVALID_SOCKET) {
            printf("Connection attempt from %s\n", inet_ntoa(sadr.sin_addr));

            err = HandleTCPConnection(csock);
			
			fprintf(stderr, "Result: %d\n", err);
        }
        else{
            fprintf(stderr, "Error accepting %d\n",WSAGetLastError());
        }
	}

FINISH:
	return err;
}
开发者ID:leomeyer,项目名称:OPDI,代码行数:80,代码来源:WinOPDI.cpp


示例16: main

/* =========================== */
int main(int argc,char *argv[])
{
   unsigned short       port;
   int                  result;
   int                  err;
   SOCKET               masterSock;
   SOCKET               clientSock;
   em_workspace_t       *wrk;
   struct sockaddr_in   servAddr;
   int                  i;
   WORD                 wVersionRequested;
   WSADATA              wsaData;
   int                  clientAddrLen;
   struct sockaddr      clientAddr;

   fprintf(stdout,"Embedded Web Server - Windows 95 : %s\n",__TIMESTAMP__);
   fprintf(stdout,"Copyright (c) 1995-1996 David M. Howard\n");

   port = w95t_server_port;

   /* initialize printf */
   printf_init();

   /* =============================================== */
   /* initialize winsock library                      */
   /* =============================================== */

   wVersionRequested = MAKEWORD(1, 1);

   err = WSAStartup(wVersionRequested, &wsaData);
   if (err != 0) {
      fprintf(stderr,"Can't initialize winsock lib\n");
      exit(1);
   }

   /* Confirm that the Windows Sockets DLL supports 1.1.*/
   /* Note that if the DLL supports versions greater */
   /* than 1.1  

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ LOC函数代码示例发布时间:2022-05-30
下一篇:
C++ LOAD_SYMBOL函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap