• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ LIST_HEAD函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中LIST_HEAD函数的典型用法代码示例。如果您正苦于以下问题:C++ LIST_HEAD函数的具体用法?C++ LIST_HEAD怎么用?C++ LIST_HEAD使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了LIST_HEAD函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: list_test

static void list_test(void)
{
	int i ;
	struct data *node,*next;
	LIST_HEAD(lhead);
	for(i = 0; i < MAX_LIST; i++)
	{
		struct data *pdata;
		pdata = kmalloc(sizeof(struct data),GFP_KERNEL);
		pdata->i = i;
		if(!pdata)
			goto clean;
		list_add(&pdata->list,&lhead);
	}
	list_for_each_entry(node,&lhead,list)
		printk("list entry:%d\n",node->i);
clean:
	list_for_each_entry_safe(node,next,&lhead,list)
		kfree(node);
}
开发者ID:lyq628,项目名称:exercises,代码行数:20,代码来源:listhead.c


示例2: svr_checker_up

/* Test if realserver is marked UP for a specific checker */
int
svr_checker_up(checker_id_t cid, real_server_t *rs)
{
	element e;
	list l = rs->failed_checkers;
	checker_id_t *id;

	/*
	 * We assume there is not too much checker per
	 * real server, so we consider this lookup as
	 * o(1).
	 */
	for (e = LIST_HEAD(l); e; ELEMENT_NEXT(e)) {
		id = ELEMENT_DATA(e);
		if (*id == cid)
			return 0;
	}

	return 1;
}
开发者ID:dyhjgl,项目名称:keepalived,代码行数:21,代码来源:ipwrapper.c


示例3: __linkwatch_run_queue

static void __linkwatch_run_queue(int urgent_only)
{
	struct net_device *dev;
	LIST_HEAD(wrk);

	/*
                                               
                                                
                                            
                                                   
                                   
  */
	if (!urgent_only)
		linkwatch_nextevent = jiffies + HZ;
	/*                                    */
	else if (time_after(linkwatch_nextevent, jiffies + HZ))
		linkwatch_nextevent = jiffies;

	clear_bit(LW_URGENT, &linkwatch_flags);

	spin_lock_irq(&lweventlist_lock);
	list_splice_init(&lweventlist, &wrk);

	while (!list_empty(&wrk)) {

		dev = list_first_entry(&wrk, struct net_device, link_watch_list);
		list_del_init(&dev->link_watch_list);

		if (urgent_only && !linkwatch_urgent_event(dev)) {
			list_add_tail(&dev->link_watch_list, &lweventlist);
			continue;
		}
		spin_unlock_irq(&lweventlist_lock);
		linkwatch_do_dev(dev);
		spin_lock_irq(&lweventlist_lock);
	}

	if (!list_empty(&lweventlist))
		linkwatch_schedule_work(0);
	spin_unlock_irq(&lweventlist_lock);
}
开发者ID:romanbb,项目名称:android_kernel_lge_d851,代码行数:41,代码来源:link_watch.c


示例4: distdb_fetch_result_remote

/**
 * 获得远程返回的结果,
 */
int distdb_fetch_result_remote(struct DISTDB_SQL_RESULT * reslt,
		char ** table[], int ifpeek)
{
	int i;
	struct sql_result_plain_text * ptext;
	pthread_mutex_lock(&reslt->lock);
	if (LIST_ISEMPTY(reslt->sql_result))
	{
		if (reslt->ref && !ifpeek) //还有结果会陆续进来,呵呵
		{
			pthread_cond_wait(&reslt->waitcond, &reslt->lock);
		}
		else if (reslt->ref && ifpeek)
		{
			pthread_mutex_unlock(&reslt->lock);
			return 1;
		}
		else if( reslt->ref ==0)
		{
			pthread_mutex_unlock(&reslt->lock);
			return -1;
		}
	}
	if (reslt->ref == 0)
		return -1;

	if (reslt->last)
		free(reslt->last);

	ptext = LIST_HEAD(reslt->sql_result.head,sql_result_plain_text,resultlist);
	LIST_DELETE_AT(&ptext->resultlist);
	reslt->last = ptext;

	for (i = 0; i < reslt->colums; ++i)
	{
		reslt ->last_table[i] = ptext->plaindata + ptext->strings[i].offset;
	}

	pthread_mutex_unlock(&reslt->lock);
	return 0;
}
开发者ID:kikidong,项目名称:distdb,代码行数:44,代码来源:database.c


示例5: vrrp_print_stats

void
vrrp_print_stats(void)
{
	FILE *file;
	file = fopen ("/tmp/keepalived.stats","w");

	list l = vrrp_data->vrrp;
	element e;
	vrrp_t *vrrp;

	for (e = LIST_HEAD(l); e; ELEMENT_NEXT(e)) {
		vrrp = ELEMENT_DATA(e);
		fprintf(file, "VRRP Instance: %s\n", vrrp->iname);
		fprintf(file, "  Advertisements:\n");
		fprintf(file, "    Received: %d\n", vrrp->stats->advert_rcvd);
		fprintf(file, "    Sent: %d\n", vrrp->stats->advert_sent);
		fprintf(file, "  Became master: %d\n", vrrp->stats->become_master);
		fprintf(file, "  Released master: %d\n",
			vrrp->stats->release_master);
		fprintf(file, "  Packet Errors:\n");
		fprintf(file, "    Length: %d\n", vrrp->stats->packet_len_err);
		fprintf(file, "    TTL: %d\n", vrrp->stats->ip_ttl_err);
		fprintf(file, "    Invalid Type: %d\n",
			vrrp->stats->invalid_type_rcvd);
		fprintf(file, "    Advertisement Interval: %d\n",
			vrrp->stats->advert_interval_err);
		fprintf(file, "    Address List: %d\n",
			vrrp->stats->addr_list_err);
		fprintf(file, "  Authentication Errors:\n");
		fprintf(file, "    Invalid Type: %d\n",
			vrrp->stats->invalid_authtype);
		fprintf(file, "    Type Mismatch: %d\n",
			vrrp->stats->authtype_mismatch);
		fprintf(file, "    Failure: %d\n",
			vrrp->stats->auth_failure);
		fprintf(file, "  Priority Zero:\n");
		fprintf(file, "    Received: %d\n", vrrp->stats->pri_zero_rcvd);
		fprintf(file, "    Sent: %d\n", vrrp->stats->pri_zero_sent);
	}
	fclose(file);
}
开发者ID:jwalzer,项目名称:keepalived,代码行数:41,代码来源:vrrp_print.c


示例6: print_processes_backwards

static int __init print_processes_backwards(void)
{
    LIST_HEAD(data_stack);
    int result = 0; // OK

    stack_entry_t *task_entry = NULL;
    struct task_struct *task = NULL;
    char *task_name = NULL;

    for_each_process (task) {
        task_name = kmalloc(TASK_COMM_LEN, GFP_KERNEL);

        if (task_name) {
            task_entry = create_stack_entry(task_name);
            if (task_entry) {
                task_name = get_task_comm(task_name, task);
                stack_push(&data_stack, task_entry);
            } else {
                kfree(task_name);
                result = -ENOMEM;
                break;
            }
        } else {
            result = -ENOMEM;
            break;
        }
    }

    while (!stack_empty(&data_stack)) {
        task_entry = stack_pop(&data_stack);
        task_name = STACK_ENTRY_DATA(task_entry, char*);
        delete_stack_entry(task_entry);

        if (result != -ENOMEM) {
            printk(KERN_ALERT "task name = %s\n", task_name);
        }
        kfree(task_name);
    }

    return result;
}
开发者ID:GolovanovSrg,项目名称:au-linux-kernel-spring-2016,代码行数:41,代码来源:module.c


示例7: nfs_flushd

static void
nfs_flushd(struct rpc_task *task)
{
	struct nfs_server	*server;
	struct nfs_reqlist	*cache;
	LIST_HEAD(head);

        dprintk("NFS: %4d flushd starting\n", task->tk_pid);
	server = (struct nfs_server *) task->tk_calldata;
        cache = server->rw_requests;

	for(;;) {
		spin_lock(&nfs_wreq_lock);
		if (nfs_scan_lru_dirty_timeout(server, &head)) {
			spin_unlock(&nfs_wreq_lock);
			nfs_flush_list(&head, server->wpages, FLUSH_AGING);
			continue;
		}
		if (nfs_scan_lru_read_timeout(server, &head)) {
			spin_unlock(&nfs_wreq_lock);
			nfs_pagein_list(&head, server->rpages);
			continue;
		}
#ifdef CONFIG_NFS_V3
		if (nfs_scan_lru_commit_timeout(server, &head)) {
			spin_unlock(&nfs_wreq_lock);
			nfs_commit_list(&head, FLUSH_AGING);
			continue;
		}
#endif
		spin_unlock(&nfs_wreq_lock);
		break;
	}

	dprintk("NFS: %4d flushd back to sleep\n", task->tk_pid);
	if (task->tk_action) {
		task->tk_timeout = NFS_FLUSHD_TIMEOUT;
		cache->runat = jiffies + task->tk_timeout;
		rpc_sleep_on(&flushd_queue, task, NULL, NULL);
	}
}
开发者ID:iwangv,项目名称:edimax-br-6528n,代码行数:41,代码来源:flushd.c


示例8: pcibios_init

/*
 * Initialization. Try all known PCI access methods. Note that we support
 * using both PCI BIOS and direct access: in such cases, we use I/O ports
 * to access config space, but we still keep BIOS order of cards to be
 * compatible with 2.0.X. This should go away some day.
 */
static int __init pcibios_init(void)
{
	resource_size_t io_offset, mem_offset;
	LIST_HEAD(resources);
	struct pci_bus *bus;

	ioport_resource.start	= 0xA0000000;
	ioport_resource.end	= 0xDFFFFFFF;
	iomem_resource.start	= 0xA0000000;
	iomem_resource.end	= 0xDFFFFFFF;

	if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
		panic("Unable to insert PCI IOMEM resource\n");
	if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
		panic("Unable to insert PCI IOPORT resource\n");

	if (!pci_probe)
		return 0;

	if (pci_check_direct() < 0) {
		printk(KERN_WARNING "PCI: No PCI bus detected\n");
		return 0;
	}

	printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
	       MEM_PAGING_REG);

	io_offset = pci_ioport_resource.start -
	    (pci_ioport_resource.start & 0x00ffffff);
	mem_offset = pci_iomem_resource.start -
	    ((pci_iomem_resource.start & 0x03ffffff) | MEM_PAGING_REG);

	pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset);
	pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset);
	bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
	if (!bus)
		return 0;
	pcibios_resource_survey();
	pci_bus_add_devices(bus);
	return 0;
}
开发者ID:skdwriting,项目名称:kbase,代码行数:47,代码来源:pci.c


示例9: __linkwatch_run_queue

static void __linkwatch_run_queue(int urgent_only)
{
	struct net_device *dev;
	LIST_HEAD(wrk);

	/*
	 * Limit the number of linkwatch events to one
	 * per second so that a runaway driver does not
	 * cause a storm of messages on the netlink
	 * socket.  This limit does not apply to up events
	 * while the device qdisc is down.
	 */
	if (!urgent_only)
		linkwatch_nextevent = jiffies + HZ;
	/* Limit wrap-around effect on delay. */
	else if (time_after(linkwatch_nextevent, jiffies + HZ))
		linkwatch_nextevent = jiffies;

	clear_bit(LW_URGENT, &linkwatch_flags);

	spin_lock_irq(&lweventlist_lock);
	list_splice_init(&lweventlist, &wrk);

	while (!list_empty(&wrk)) {

		dev = list_first_entry(&wrk, struct net_device, link_watch_list);
		list_del_init(&dev->link_watch_list);

		if (urgent_only && !linkwatch_urgent_event(dev)) {
			list_add_tail(&dev->link_watch_list, &lweventlist);
			continue;
		}
		spin_unlock_irq(&lweventlist_lock);
		linkwatch_do_dev(dev);
		spin_lock_irq(&lweventlist_lock);
	}

	if (!list_empty(&lweventlist))
		linkwatch_schedule_work(0);
	spin_unlock_irq(&lweventlist_lock);
}
开发者ID:A2109devs,项目名称:lenovo_a2109a_kernel,代码行数:41,代码来源:link_watch.c


示例10: expand_single_string

static int expand_single_string(struct token *tok, struct token *next,
				struct string **string_ret)
{
	int ret;
	LIST_HEAD(string_list);
	ret = expand_params_and_word_split(tok, next, &string_list);
	if (ret)
		goto out_free_string_list;
	ret = glue_strings(&string_list);
	if (ret)
		goto out_free_string_list;
	if (!mysh_filename_expansion_disabled) {
		ret = do_filename_expansion(&string_list);
		if (ret)
			goto out_free_string_list;
	}
	if (list_empty(&string_list))
		*string_ret = NULL;
	else if (list_is_singular(&string_list))
		*string_ret = list_entry(string_list.next, struct string, list);
	else {
开发者ID:ebiggers,项目名称:mysh,代码行数:21,代码来源:mysh_parse.c


示例11: main

int main()
{
    LIST_HEAD(list);
    append_node(&list);
    append_node(&list);

    struct node *pos;
    list_for_each_entry(pos, &list, embedded_head)
        ___sl_plot(NULL);

    ___sl_plot(NULL);

    // insane -- better to use list_for_each_entry_safe()
    while (&list != list.prev) {
        list.next = list.prev->prev;
        free(list_entry(list.prev, struct node, embedded_head));
        list.prev = list.next;
    }

    return 0;
}
开发者ID:jpokorny,项目名称:predator,代码行数:21,代码来源:test-0139.c


示例12: vrrp_timer_vrid_timeout

static int
vrrp_timer_vrid_timeout(const int fd)
{
	vrrp_rt *vrrp;
	element e;
	list l = &vrrp_data->vrrp_index_fd[fd%1024 + 1];
	TIMEVAL timer;
	int vrid = 0;

	/* Multiple instances on the same interface */
	TIMER_RESET(timer);
	for (e = LIST_HEAD(l); e; ELEMENT_NEXT(e)) {
		vrrp = ELEMENT_DATA(e);
		if (timer_cmp(vrrp->sands, timer) < 0 ||
		    TIMER_ISNULL(timer)) {
			timer = timer_dup(vrrp->sands);
			vrid = vrrp->vrid;
		}
	}
	return vrid;
}
开发者ID:jsouthworth,项目名称:keepalived,代码行数:21,代码来源:vrrp_scheduler.c


示例13: take_over_work

static void take_over_work(struct ehca_comp_pool *pool, int cpu)
{
    struct ehca_cpu_comp_task *cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu);
    LIST_HEAD(list);
    struct ehca_cq *cq;
    unsigned long flags_cct;

    spin_lock_irqsave(&cct->task_lock, flags_cct);

    list_splice_init(&cct->cq_list, &list);

    while (!list_empty(&list)) {
        cq = list_entry(cct->cq_list.next, struct ehca_cq, entry);

        list_del(&cq->entry);
        __queue_comp_task(cq, this_cpu_ptr(pool->cpu_comp_tasks));
    }

    spin_unlock_irqrestore(&cct->task_lock, flags_cct);

}
开发者ID:MrJwiz,项目名称:UBER-M,代码行数:21,代码来源:ehca_irq.c


示例14: draw_battle_target

static void draw_battle_target(
    BATTLE *battle,
    BATTLE_ACTOR *ba
)
{
    int x, y;
    STEP_POINT *p;

    for (p = (STEP_POINT *) LIST_HEAD(&ba->targetList);
            p != NULL;
            p = (STEP_POINT *) LIST_NEXT(&p->listNode)) {

        x = p->i * BMARKER_WIDTH - battle->world->x;
        y = p->j * BMARKER_HEIGHT - battle->world->y;

        draw_sprite(x, y,
                    TARGET_MARKER, battle->bmarker,
                    0, 0, window_width, window_height);

    }
}
开发者ID:phoboz,项目名称:yz,代码行数:21,代码来源:battle.c


示例15: rpc_timeout_upcall_queue

static void
rpc_timeout_upcall_queue(struct work_struct *work)
{
	LIST_HEAD(free_list);
	struct rpc_pipe *pipe =
		container_of(work, struct rpc_pipe, queue_timeout.work);
	void (*destroy_msg)(struct rpc_pipe_msg *);
	struct dentry *dentry;

	spin_lock(&pipe->lock);
	destroy_msg = pipe->ops->destroy_msg;
	if (pipe->nreaders == 0) {
		list_splice_init(&pipe->pipe, &free_list);
		pipe->pipelen = 0;
	}
	dentry = dget(pipe->dentry);
	spin_unlock(&pipe->lock);
	rpc_purge_list(dentry ? &RPC_I(dentry->d_inode)->waitq : NULL,
			&free_list, destroy_msg, -ETIMEDOUT);
	dput(dentry);
}
开发者ID:7799,项目名称:linux,代码行数:21,代码来源:rpc_pipe.c


示例16: kmem_cache_reap

void kmem_cache_reap(struct kmem_cache *cache)
{
	LIST_HEAD(list);

	const bool enabled = spin_lock_irqsave(&cache->lock);

	list_splice(&cache->free_list, &list);
	spin_unlock_irqrestore(&cache->lock, enabled);

	for (struct list_head *ptr = list.next; ptr != &list;) {
		struct kmem_slab *slab =
			LIST_ENTRY(ptr, struct kmem_slab, link);
		struct page *pages = slab->pages;

		ptr = ptr->next;
		if (cache->ops->destroy)
			cache->ops->destroy(cache, slab);

		free_pages(pages, cache->order);	
	}
}
开发者ID:krinkinmu,项目名称:64bit,代码行数:21,代码来源:kmem_cache.c


示例17: hashinit

/*
 * General routine to allocate a hash table.
 */
void *
hashinit(int elements, int type, u_long *hashmask)
{
	long hashsize;
	LIST_HEAD(generic, generic) *hashtbl;
	int i;

	if (elements <= 0)
		panic("hashinit: bad cnt");
	for (hashsize = 1; hashsize <= elements; hashsize <<= 1)
		continue;
	hashsize >>= 1;
	MALLOC(hashtbl, struct generic *, 
		(u_long)hashsize * sizeof(*hashtbl), type, M_WAITOK|M_ZERO);
	if (hashtbl != NULL) {
		for (i = 0; i < hashsize; i++)
			LIST_INIT(&hashtbl[i]);
		*hashmask = hashsize - 1;
	}
	return (hashtbl);
}
开发者ID:MACasuba,项目名称:MACasuba-Utils-git,代码行数:24,代码来源:kern_subr.c


示例18: main

int main()
{
    // NOTE: two nodes should be enough to trigger DLS abstraction by default
    //       and consequently the spurious memory leak in the end
    LIST_HEAD(list);
    append_node(&list);
    append_node(&list);

    // plot heap in each iteration
    struct node *pos;
    list_for_each_entry(pos, &list, embedded_head)
        ___sl_plot(NULL);

    // plot heap after list_for_each_entry() -- an off-value should be there
    ___sl_plot(NULL);

    // use list_entry()
    free(list_entry(list.next, struct node, embedded_head));
    free(list_entry(list.prev, struct node, embedded_head));
    return 0;
}
开发者ID:jpokorny,项目名称:predator,代码行数:21,代码来源:test-0140.c


示例19: phashinit

/*
 * General routine to allocate a prime number sized hash table.
 */
void *
phashinit(int elements, struct malloc_type *type, u_long *nentries)
{
	long hashsize;
	LIST_HEAD(generic, generic) *hashtbl;
	int i;

	KASSERT(elements > 0, ("%s: bad elements", __func__));
	for (i = 1, hashsize = primes[1]; hashsize <= elements;) {
		i++;
		if (i == NPRIMES)
			break;
		hashsize = primes[i];
	}
	hashsize = primes[i - 1];
	hashtbl = malloc((u_long)hashsize * sizeof(*hashtbl), type, M_WAITOK);
	for (i = 0; i < hashsize; i++)
		LIST_INIT(&hashtbl[i]);
	*nentries = hashsize;
	return (hashtbl);
}
开发者ID:AhmadTux,项目名称:freebsd,代码行数:24,代码来源:subr_hash.c


示例20: netlink_rtlist

/* Add/Delete a list of IP routes */
void
netlink_rtlist(list rt_list, int cmd)
{
	ip_route_t *iproute;
	element e;

	/* No routes to add */
	if (LIST_ISEMPTY(rt_list))
		return;

	for (e = LIST_HEAD(rt_list); e; ELEMENT_NEXT(e)) {
		iproute = ELEMENT_DATA(e);
		if ((cmd == IPROUTE_ADD && !iproute->set) ||
		    (cmd == IPROUTE_DEL && iproute->set)) {
			if (netlink_route(iproute, cmd) > 0)
				iproute->set = (cmd == IPROUTE_ADD);
			else
				iproute->set = false;
		}
	}
}
开发者ID:Zex,项目名称:keepalived,代码行数:22,代码来源:vrrp_iproute.c



注:本文中的LIST_HEAD函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ LIST_HEAD_INIT函数代码示例发布时间:2022-05-30
下一篇:
C++ LIST_FOREACH函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap