本文整理汇总了C++中LIST_DEL函数的典型用法代码示例。如果您正苦于以下问题:C++ LIST_DEL函数的具体用法?C++ LIST_DEL怎么用?C++ LIST_DEL使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了LIST_DEL函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: _fenced_buffer_remove
static INLINE void
_fenced_buffer_remove(struct fenced_buffer_list *fenced_list,
struct fenced_buffer *fenced_buf)
{
struct pipe_winsys *winsys = fenced_list->winsys;
assert(fenced_buf->fence);
assert(fenced_buf->list == fenced_list);
winsys->fence_reference(winsys, &fenced_buf->fence, NULL);
fenced_buf->flags &= ~PIPE_BUFFER_USAGE_GPU_READ_WRITE;
assert(fenced_buf->head.prev);
assert(fenced_buf->head.next);
LIST_DEL(&fenced_buf->head);
#ifdef DEBUG
fenced_buf->head.prev = NULL;
fenced_buf->head.next = NULL;
#endif
assert(fenced_list->numDelayed);
--fenced_list->numDelayed;
if(!fenced_buf->base.base.refcount)
_fenced_buffer_destroy(fenced_buf);
}
开发者ID:astrofimov,项目名称:vgallium,代码行数:26,代码来源:pb_buffer_fenced.c
示例2: unvme_session_delete
/**
* Delete a session and its associated queues.
* @param ses session
*/
static void unvme_session_delete(unvme_session_t* ses)
{
if (ses->id > 0) {
pthread_spin_lock(&ses->iomem.lock);
if (ses->iomem.size) {
int i;
for (i = 0; i < ses->iomem.count; i++) {
(void) vfio_dma_free(ses->iomem.map[i]);
}
ses->iomem.size = ses->iomem.count = 0;
free(ses->iomem.map);
}
pthread_spin_unlock(&ses->iomem.lock);
pthread_spin_destroy(&ses->iomem.lock);
}
if (ses == ses->next) {
DEBUG_FN("%x: adminq", unvme_dev.vfiodev->pci);
unvme_adminq_delete(ses->queues);
} else {
DEBUG_FN("%x: q=%d-%d", unvme_dev.vfiodev->pci, ses->id,
ses->id + ses->qcount -1);
while (--ses->qcount >= 0) {
unvme_queue_t* ioq = &ses->queues[ses->qcount];
if (ioq->ses) unvme_ioq_delete(ioq);
}
}
LIST_DEL(unvme_dev.ses, ses);
free(ses);
}
开发者ID:MicronSSD,项目名称:unvme,代码行数:34,代码来源:unvme_core.c
示例3: usb_close
int
usb_close(usb_dev_handle * udev)
{
struct usb_device *dev;
int err;
err = libusb20_dev_close((void *)udev);
if (err)
return (-1);
if (usb_backend != NULL) {
/*
* Enqueue USB device to backend queue so that it gets freed
* when the backend is re-scanned:
*/
libusb20_be_enqueue_device(usb_backend, (void *)udev);
} else {
/*
* The backend is gone. Free device data so that we
* don't start leaking memory!
*/
dev = usb_device(udev);
libusb20_dev_free((void *)udev);
LIST_DEL(usb_global_bus.devices, dev);
free(dev);
}
return (0);
}
开发者ID:Gwenio,项目名称:DragonFlyBSD,代码行数:29,代码来源:libusb01.c
示例4: resume_listener
/* This function tries to resume a temporarily disabled listener. Paused, full,
* limited and disabled listeners are handled, which means that this function
* may replace enable_listener(). The resulting state will either be LI_READY
* or LI_FULL. 0 is returned in case of failure to resume (eg: dead socket).
*/
int resume_listener(struct listener *l)
{
if (l->state < LI_PAUSED)
return 0;
if (l->proto->sock_prot == IPPROTO_TCP &&
l->state == LI_PAUSED &&
listen(l->fd, l->backlog ? l->backlog : l->maxconn) != 0)
return 0;
if (l->state == LI_READY)
return 1;
if (l->state == LI_LIMITED)
LIST_DEL(&l->wait_queue);
if (l->nbconn >= l->maxconn) {
l->state = LI_FULL;
return 1;
}
fd_want_recv(l->fd);
l->state = LI_READY;
return 1;
}
开发者ID:carriercomm,项目名称:haproxy-1,代码行数:30,代码来源:listener.c
示例5: svga_buffer_upload_flush
/**
* Patch up the upload DMA command reserved by svga_buffer_upload_command
* with the final ranges.
*/
void
svga_buffer_upload_flush(struct svga_context *svga,
struct svga_buffer *sbuf)
{
SVGA3dCopyBox *boxes;
unsigned i;
struct pipe_resource *dummy;
if (!sbuf->dma.pending) {
return;
}
assert(sbuf->handle);
assert(sbuf->hwbuf);
assert(sbuf->map.num_ranges);
assert(sbuf->dma.svga == svga);
assert(sbuf->dma.boxes);
/*
* Patch the DMA command with the final copy box.
*/
SVGA_DBG(DEBUG_DMA, "dma to sid %p\n", sbuf->handle);
boxes = sbuf->dma.boxes;
for (i = 0; i < sbuf->map.num_ranges; ++i) {
SVGA_DBG(DEBUG_DMA, " bytes %u - %u\n",
sbuf->map.ranges[i].start, sbuf->map.ranges[i].end);
boxes[i].x = sbuf->map.ranges[i].start;
boxes[i].y = 0;
boxes[i].z = 0;
boxes[i].w = sbuf->map.ranges[i].end - sbuf->map.ranges[i].start;
boxes[i].h = 1;
boxes[i].d = 1;
boxes[i].srcx = sbuf->map.ranges[i].start;
boxes[i].srcy = 0;
boxes[i].srcz = 0;
}
sbuf->map.num_ranges = 0;
assert(sbuf->head.prev && sbuf->head.next);
LIST_DEL(&sbuf->head);
#ifdef DEBUG
sbuf->head.next = sbuf->head.prev = NULL;
#endif
sbuf->dma.pending = FALSE;
sbuf->dma.flags.discard = FALSE;
sbuf->dma.flags.unsynchronized = FALSE;
sbuf->dma.svga = NULL;
sbuf->dma.boxes = NULL;
/* Decrement reference count (and potentially destroy) */
dummy = &sbuf->b.b;
pipe_resource_reference(&dummy, NULL);
}
开发者ID:ChillyWillyGuru,项目名称:RSXGL,代码行数:62,代码来源:svga_resource_buffer_upload.c
示例6: _ies_task_job_handle_queue
static _ies_task_job_handle_queue()
{
/*----------------------------------------------------------------*/
/* Local Variables */
/*----------------------------------------------------------------*/
srv_ies_job *pJob;
SRV_IES_JOB_STATE_ENUM state;
/*----------------------------------------------------------------*/
/* Code Body */
/*----------------------------------------------------------------*/
pJob = NULL;
if (LIST_EMPTY(&(g_ies_task_context.normal)))
{
if (!LIST_EMPTY(&(g_ies_task_context.lowest)))
{
pJob = (srv_ies_job*)(g_ies_task_context.lowest.pNext);
LIST_DEL((srv_ies_list_head_struct*)pJob);
}
}
else
{
pJob = (srv_ies_job*)(g_ies_task_context.normal.pNext);
LIST_DEL(((srv_ies_list_head_struct*)pJob));
}
if (pJob)
{
kal_take_mutex(g_srv_ies_job_mutex);
state = pJob->state;
kal_give_mutex(g_srv_ies_job_mutex);
ASSERT(SRV_IES_JOB_STATE_FINISHED != pJob->state);
if (SRV_IES_JOB_STATE_CANCELLED != state)
{
g_ies_task_context.pJob = pJob;
if (_ies_task_job_handle_start(g_ies_task_context.pJob))
{
g_ies_task_context.pJob = NULL;
}
}
}
}
开发者ID:wangzhibinjunhua,项目名称:plutommi,代码行数:45,代码来源:ImgEdtSrvTask.c
示例7: while
static void *gp_worker_main(void *pvt)
{
struct gp_thread *t = (struct gp_thread *)pvt;
struct gp_query *q = NULL;
char dummy = 0;
int ret;
while (!t->pool->shutdown) {
/* ======> COND_MUTEX */
pthread_mutex_lock(&t->cond_mutex);
while (t->query == NULL) {
/* wait for next query */
pthread_cond_wait(&t->cond_wakeup, &t->cond_mutex);
if (t->pool->shutdown) {
pthread_exit(NULL);
}
}
/* grab the query off the shared pointer */
q = t->query;
t->query = NULL;
/* <====== COND_MUTEX */
pthread_mutex_unlock(&t->cond_mutex);
/* handle the client request */
gp_handle_query(t->pool, q);
/* now get lock on main queue, to play with the reply list */
/* ======> POOL LOCK */
pthread_mutex_lock(&t->pool->lock);
/* put back query so that dispatcher can send reply */
q->next = t->pool->reply_list;
t->pool->reply_list = q;
/* add us back to the free list but only if we are not
* shutting down */
if (!t->pool->shutdown) {
LIST_DEL(t->pool->busy_list, t);
LIST_ADD(t->pool->free_list, t);
}
/* <====== POOL LOCK */
pthread_mutex_unlock(&t->pool->lock);
/* and wake up dispatcher so it will handle it */
ret = write(t->pool->sig_pipe[1], &dummy, 1);
if (ret == -1) {
GPERROR("Failed to signal dispatcher!");
}
}
pthread_exit(NULL);
}
开发者ID:frozencemetery,项目名称:gssproxy,代码行数:56,代码来源:gp_workers.c
示例8: LIST_FOR_EACH
void *mm_request_bf(int n, int *steps)
{
void *p, *prev, *next;
void *best;
unsigned int best_size;
unsigned int size;
void *new_p;
if (steps != NULL) *steps = 0;
if (n <= 0) return NULL;
best = NULL;
best_size = INT_MAX;
LIST_FOR_EACH(FREE_LIST_HEAD, p) {
if (steps != NULL) (*steps)++;
size = GET_SIZE_FRONT(p);
if (size >= (unsigned int)n) {
best_size = size;
best = p;
break;
}
}
if (best == NULL) return NULL;
if (best_size >= (unsigned int)n && best_size < n + HEAD_SIZE + FOOT_SIZE + 1) { //刚好相等 或 多出来的不足以存放(head+foot+1),就把整块给用户
LIST_DEL(best);
SET_TAG_FRONT(best, TAG_USED);
return GET_USER_START_FRONT(best);
} else if (best_size >= n + HEAD_SIZE + FOOT_SIZE + 1) { //足够多,可以分成两块,一块给用户,另一块空闲
prev = GET_PREV_FRONT(best);
next = GET_NEXT_FRONT(best);
SET_SIZE_FRONT(best, n);
SET_TAG_FRONT(best, TAG_USED);
new_p = GET_BACK_FRONT(best);
SET_SIZE_FRONT(new_p, best_size - n - FOOT_SIZE - HEAD_SIZE);
SET_TAG_FRONT(new_p, TAG_FREE);
SET_NEXT_FRONT(prev, new_p);
SET_PREV_FRONT(new_p, prev);
SET_PREV_FRONT(next, new_p);
SET_NEXT_FRONT(new_p, next);
LIST_DEL(new_p);
list_add_bf(new_p, FREE_LIST_HEAD);
return GET_USER_START_FRONT(best);
}
return NULL;
}
开发者ID:innoink,项目名称:bjtu_projects,代码行数:43,代码来源:mem_mgr_bf.c
示例9: listener_full
/* Marks a ready listener as full so that the session code tries to re-enable
* it upon next close() using resume_listener().
*/
void listener_full(struct listener *l)
{
if (l->state >= LI_READY) {
if (l->state == LI_LIMITED)
LIST_DEL(&l->wait_queue);
EV_FD_CLR(l->fd, DIR_RD);
l->state = LI_FULL;
}
}
开发者ID:BeachheadStudio,项目名称:haproxy,代码行数:13,代码来源:protocols.c
示例10: disable_listener
/* This function removes the specified listener's file descriptor from the
* polling lists if it is in the LI_READY or in the LI_FULL state. The listener
* enters LI_LISTEN.
*/
void disable_listener(struct listener *listener)
{
if (listener->state < LI_READY)
return;
if (listener->state == LI_READY)
EV_FD_CLR(listener->fd, DIR_RD);
if (listener->state == LI_LIMITED)
LIST_DEL(&listener->wait_queue);
listener->state = LI_LISTEN;
}
开发者ID:BeachheadStudio,项目名称:haproxy,代码行数:14,代码来源:protocols.c
示例11: while
~ipcwbuf_s()
{
while (first_a)
{
ipcwspace *spc = first_a;
LIST_DEL(spc, first_a, last_a, prev, next);
spc->~ipcwspace();
ph_allocator::mf(spc);
}
}
开发者ID:strogo,项目名称:Isotoxin,代码行数:10,代码来源:plghost.cpp
示例12: listener_full
/* Marks a ready listener as full so that the session code tries to re-enable
* it upon next close() using resume_listener().
*/
void listener_full(struct listener *l)
{
if (l->state >= LI_READY) {
if (l->state == LI_LIMITED)
LIST_DEL(&l->wait_queue);
fd_stop_recv(l->fd);
l->state = LI_FULL;
}
}
开发者ID:Eyepea,项目名称:haproxy,代码行数:13,代码来源:listener.c
示例13: disable_listener
/* This function removes the specified listener's file descriptor from the
* polling lists if it is in the LI_READY or in the LI_FULL state. The listener
* enters LI_LISTEN.
*/
void disable_listener(struct listener *listener)
{
if (listener->state < LI_READY)
return;
if (listener->state == LI_READY)
fd_stop_recv(listener->fd);
if (listener->state == LI_LIMITED)
LIST_DEL(&listener->wait_queue);
listener->state = LI_LISTEN;
}
开发者ID:Eyepea,项目名称:haproxy,代码行数:14,代码来源:listener.c
示例14: pendconn_free
/*
* Detaches pending connection <p>, decreases the pending count, and frees
* the pending connection. The connection might have been queued to a specific
* server as well as to the proxy. The session also gets marked unqueued.
*/
void pendconn_free(struct pendconn *p)
{
LIST_DEL(&p->list);
p->sess->pend_pos = NULL;
if (p->srv)
p->srv->nbpend--;
else
p->sess->be->nbpend--;
p->sess->be->totpend--;
pool_free2(pool2_pendconn, p);
}
开发者ID:kjwierenga,项目名称:haproxy-icey,代码行数:16,代码来源:queue.c
示例15: req_acl_free
void
req_acl_free(struct list *r) {
struct req_acl_rule *tr, *pr;
list_for_each_entry_safe(pr, tr, r, list) {
LIST_DEL(&pr->list);
if (pr->action == PR_REQ_ACL_ACT_HTTP_AUTH)
free(pr->http_auth.realm);
free(pr);
}
开发者ID:chyh1990,项目名称:fastsocket,代码行数:11,代码来源:auth.c
示例16: unvme_ioq_delete
/**
* Delete an I/O queue.
* @param ioq io queue
*/
static void unvme_ioq_delete(unvme_queue_t* ioq)
{
DEBUG_FN("%x: q=%d", unvme_dev.vfiodev->pci, ioq->id);
if (ioq->nvq) (void) nvme_delete_ioq(ioq->nvq);
if (ioq->prplist) (void) vfio_dma_free(ioq->prplist);
if (ioq->cqdma) (void) vfio_dma_free(ioq->cqdma);
if (ioq->sqdma) (void) vfio_dma_free(ioq->sqdma);
if (ioq->cidmask) free(ioq->cidmask);
unvme_desc_t* desc;
while ((desc = ioq->desclist) != NULL) {
LIST_DEL(ioq->desclist, desc);
free(desc);
}
while ((desc = ioq->descfree) != NULL) {
LIST_DEL(ioq->descfree, desc);
free(desc);
}
unvme_dev.numioqs--;
}
开发者ID:MicronSSD,项目名称:unvme,代码行数:25,代码来源:unvme_core.c
示例17: account_list_free
void account_list_free(struct list_head* list)
{
struct list_head* get = NULL;
struct list_head* n = NULL;
list_iterate_safe(get, n, list)
{
struct account_desc* tmp = list_get(get, struct account_desc, list);
LIST_DEL(&tmp->list);
account_desc_free(&tmp);
}
}
开发者ID:phlogisto,项目名称:turnserver-mysql,代码行数:12,代码来源:account.c
示例18: _pb_cache_buffer_destroy
/**
* Actually destroy the buffer.
*/
static INLINE void
_pb_cache_buffer_destroy(struct pb_cache_buffer *buf)
{
struct pb_cache_manager *mgr = buf->mgr;
LIST_DEL(&buf->head);
assert(mgr->numDelayed);
--mgr->numDelayed;
assert(!pipe_is_referenced(&buf->base.base.reference));
pb_reference(&buf->buffer, NULL);
FREE(buf);
}
开发者ID:CPFDSoftware-Tony,项目名称:gmv,代码行数:15,代码来源:pb_bufmgr_cache.c
示例19: MXUserRemoveFromList
void
MXUserRemoveFromList(MXUserHeader *header) // IN/OUT:
{
MXRecLock *listLock = MXUserInternalSingleton(&mxLockMemPtr);
/* Tolerate a failure. This is too low down to log */
if (listLock) {
MXRecLockAcquire(listLock,
NULL); // non-stats
LIST_DEL(&header->item, &mxUserLockList);
MXRecLockRelease(listLock);
}
}
开发者ID:XenServerBestPractice,项目名称:open-vm-tools,代码行数:13,代码来源:ulStats.c
示例20: nv30_query_object_del
static void
nv30_query_object_del(struct nv30_screen *screen, struct nv30_query_object **po)
{
struct nv30_query_object *qo = *po; *po = NULL;
if (qo) {
volatile uint32_t *ntfy = nv30_ntfy(screen, qo);
while (ntfy[3] & 0xff000000) {
}
nouveau_heap_free(&qo->hw);
LIST_DEL(&qo->list);
FREE(qo);
}
}
开发者ID:FASTCHIP,项目名称:kernel_3.4.67_lenovo_s939_mtk6592,代码行数:13,代码来源:nv30_query.c
注:本文中的LIST_DEL函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论