本文整理汇总了C++中LED_Off函数的典型用法代码示例。如果您正苦于以下问题：C++ LED_Off函数的具体用法？C++ LED_Off怎么用？C++ LED_Off使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了LED_Off函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ui_init
void ui_init(void)
{
LED_On(LED0);
LED_Off(LED1);
}
开发者ID:Timvrakas，项目名称:samd21_gcc，代码行数:5，代码来源:ui.c
示例2: ui_process
void ui_process(uint16_t framenumber)
{
bool b_btn_state, success;
static bool btn_last_state = false;
static bool sequence_running = false;
static uint8_t u8_sequence_pos = 0;
uint8_t u8_value;
static uint16_t cpt_sof = 0;
if ((framenumber % 1000) == 0) {
LED_On(LED0);
}
if ((framenumber % 1000) == 500) {
LED_Off(LED0);
}
/* Scan process running each 2ms */
cpt_sof++;
if ((cpt_sof % 2) == 0) {
return;
}
/* Uses buttons to move mouse */
if (!ioport_get_pin_level(GPIO_PUSH_BUTTON_1)) {
udi_hid_mouse_moveY(-MOUSE_MOVE_RANGE);
}
/* SW0 down to send keys sequence */
b_btn_state = (!ioport_get_pin_level(GPIO_PUSH_BUTTON_1));
if (b_btn_state != btn_last_state) {
btn_last_state = b_btn_state;
sequence_running = true;
}
/* Sequence process running each period */
if (SEQUENCE_PERIOD > cpt_sof) {
return;
}
cpt_sof = 0;
if (sequence_running) {
/* Send next key */
u8_value = ui_sequence[u8_sequence_pos].u8_value;
if (u8_value!=0) {
if (ui_sequence[u8_sequence_pos].b_modifier) {
if (ui_sequence[u8_sequence_pos].b_down) {
success = udi_hid_kbd_modifier_down(u8_value);
} else {
success = udi_hid_kbd_modifier_up(u8_value);
}
} else {
if (ui_sequence[u8_sequence_pos].b_down) {
success = udi_hid_kbd_down(u8_value);
} else {
success = udi_hid_kbd_up(u8_value);
}
}
if (!success) {
return; /* Retry it on next schedule */
}
}
/* Valid sequence position */
u8_sequence_pos++;
if (u8_sequence_pos >=
sizeof(ui_sequence) / sizeof(ui_sequence[0])) {
u8_sequence_pos = 0;
sequence_running = false;
}
}
}
开发者ID:Timvrakas，项目名称:samd21_gcc，代码行数:69，代码来源:ui.c
示例3: ui_powerdown
void ui_powerdown(void)
{
LED_Off(LED0_GPIO);
LED_Off(LED1_GPIO);
}
开发者ID:ThucVD2704，项目名称:femto-usb-blink-example，代码行数:5，代码来源:ui.c
示例4: ui_com_close
void ui_com_close(uint8_t port)
{
UNUSED(port);
LED_Off(LED1);
}
开发者ID:Timvrakas，项目名称:samd21_gcc，代码行数:5，代码来源:ui.c
示例5: ui_stop_read
void ui_stop_read(void)
{
LED_Off(LED1);
}
开发者ID:Timvrakas，项目名称:samd21_gcc，代码行数:4，代码来源:ui.c
示例6: ui_com_close
void ui_com_close(uint8_t port)
{
LED_Off(LED2);
LED_Off(LED3);
}
开发者ID:kerichsen，项目名称:asf，代码行数:5，代码来源:ui.c
示例7: ui_init
void ui_init(void)
{
// Initialize LEDs
LED_On(LED0_GPIO);
LED_Off(LED1_GPIO);
}
开发者ID:AndreyMostovov，项目名称:asf，代码行数:6，代码来源:ui.c
示例8: ui_com_close
void ui_com_close(uint8_t port)
{
LED_Off(LED1_GPIO);
}
开发者ID:Gr3yR0n1n，项目名称:SAINTCON-2015-Badge，代码行数:4，代码来源:ui.c
示例9: ui_stop_write
void ui_stop_write(void)
{
LED_Off(LED2_GPIO);
}
开发者ID:Gr3yR0n1n，项目名称:SAINTCON-2015-Badge，代码行数:4，代码来源:ui.c
示例10: ModbusSaver
//Обрабатываем значения HoldingRegisters
void ModbusSaver()
{
switch (usRegHoldingBuf[MB_OFFSET+MB_COMMAND])
{
case 1:
wdt_enable(WDTO_15MS); // enable watchdog
while(1); // wait for watchdog to reset processor break;
break;
case 2:
ADXL345_Calibrate();
break;
}
usRegHoldingBuf[MB_OFFSET+MB_COMMAND] = 0;
if (usRegHoldingBuf[MB_OFFSET+MB_LED_BLUE])
{
LED_On(LED_BLUE);
}
else
{
LED_Off(LED_BLUE);
}
if (usRegHoldingBuf[MB_OFFSET+MB_LED_GREEN])
{
LED_On(LED_GREEN);
}
else
{
LED_Off(LED_GREEN);
}
if (bit_is_set(usRegHoldingBuf[MB_OFFSET+MB_SOUND], 0))
{
Sound_On();
}
else
{
Sound_Off();
}
if (usRegHoldingBuf[MB_OFFSET+MB_ALL]<16000UL)
{
usRegHoldingBuf[MB_OFFSET+MB_ALL]=16000UL;
}
if (bit_is_set(usRegHoldingBuf[MB_OFFSET+MB_MANUAL], 4))
{
float speeds[4];
speeds[FRONT_LEFT] = (float)usRegHoldingBuf[MB_OFFSET + MB_FRONT_LEFT];
speeds[FRONT_RIGHT] = (float)usRegHoldingBuf[MB_OFFSET + MB_FRONT_RIGHT];
speeds[REAR_LEFT] = (float)usRegHoldingBuf[MB_OFFSET + MB_REAR_LEFT];
speeds[REAR_RIGHT] = (float)usRegHoldingBuf[MB_OFFSET + MB_REAR_RIGHT];
SetMotors(speeds);
}
else
{
usRegHoldingBuf[MB_OFFSET + MB_FRONT_LEFT] = counter[FRONT_LEFT];
usRegHoldingBuf[MB_OFFSET + MB_FRONT_RIGHT] = counter[FRONT_RIGHT];
usRegHoldingBuf[MB_OFFSET + MB_REAR_LEFT] = counter[REAR_LEFT];
usRegHoldingBuf[MB_OFFSET + MB_REAR_RIGHT] = counter[REAR_RIGHT];
}
//t_Ox.value = 0;
//t_Oy.value = 0;
t_Ox.array[0] = usRegHoldingBuf[2];
t_Ox.array[1] = usRegHoldingBuf[3];
t_Oy.array[0] = usRegHoldingBuf[4];
t_Oy.array[1] = usRegHoldingBuf[5];
t_Oz.array[0] = usRegHoldingBuf[6];
t_Oz.array[1] = usRegHoldingBuf[7];
ModbusEEPROMLoader();
}
开发者ID:KoteSoft，项目名称:Quadrocopter-flight-controller，代码行数:80，代码来源:Params.cpp
示例11: ui_stop_read
void ui_stop_read(void)
{
LED_Off(LED1_GPIO);
}
开发者ID:Gr3yR0n1n，项目名称:SAINTCON-2015-Badge，代码行数:4，代码来源:ui.c
示例12: ui_init
void ui_init(void)
{
LED_Off(LED0_GPIO);
LED_Off(LED1_GPIO);
}
开发者ID:AndreyMostovov，项目名称:asf，代码行数:5，代码来源:ui.c
示例13: ui_process
void ui_process(uint16_t framenumber)
{
bool b_btn_state, success;
static bool btn_last_state = false;
static bool sequence_running = false;
static uint8_t sequence_pos = 0;
uint8_t value;
static uint16_t cpt_sof = 0;
if ((framenumber % 1000) == 0) {
LED_On(LED0);
}
if ((framenumber % 1000) == 500) {
LED_Off(LED0);
}
/* Scan process running each 2ms */
cpt_sof++;
if ((cpt_sof % 2) == 0) {
return;
}
/* Scan button on push button (SW0) to send keys sequence */
b_btn_state = !ioport_get_pin_level(GPIO_PUSH_BUTTON_1);
if (b_btn_state != btn_last_state) {
btn_last_state = b_btn_state;
if (btn_wakeup) {
if (!b_btn_state) {
btn_wakeup = false;
}
} else {
sequence_running = true;
}
}
/* Sequence process running each period */
if (SEQUENCE_PERIOD > cpt_sof) {
return;
}
cpt_sof = 0;
if (sequence_running) {
/* Send next key */
value = ui_sequence[sequence_pos].value;
if (value!=0) {
if (ui_sequence[sequence_pos].b_modifier) {
if (ui_sequence[sequence_pos].b_down) {
success = udi_hid_kbd_modifier_down(value);
} else {
success = udi_hid_kbd_modifier_up(value);
}
} else {
if (ui_sequence[sequence_pos].b_down) {
success = udi_hid_kbd_down(value);
} else {
success = udi_hid_kbd_up(value);
}
}
if (!success) {
return; /* Retry it on next schedule */
}
}
/* Valid sequence position */
sequence_pos++;
if (sequence_pos >=
sizeof(ui_sequence) / sizeof(ui_sequence[0])) {
sequence_pos = 0;
sequence_running = false;
}
}
}
开发者ID:Gr3yR0n1n，项目名称:SAINTCON-2015-Badge，代码行数:70，代码来源:ui.c
示例14: main
/**
* \brief Application entry point for TWI EEPROM example.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
uint32_t i;
twihs_options_t opt;
twihs_packet_t packet_tx, packet_rx;
/* Initialize the SAM system */
sysclk_init();
/* Initialize the board */
board_init();
/* Turn off LEDs */
LED_Off(LED0);
/* Initialize the console UART */
configure_console();
/* Output example information */
puts(STRING_HEADER);
/* Configure systick for 1 ms */
puts("Configure system tick to get 1ms tick period.\r");
if (SysTick_Config(sysclk_get_cpu_hz() / 1000)) {
puts("-E- Systick configuration error\r");
while (1) {
/* Capture error */
}
}
/* Enable the peripheral clock for TWI */
pmc_enable_periph_clk(BOARD_ID_TWIHS_EEPROM);
/* Configure the options of TWI driver */
opt.master_clk = sysclk_get_cpu_hz();
opt.speed = TWIHS_CLK;
/* Configure the data packet to be transmitted */
packet_tx.chip = AT24C_ADDRESS;
packet_tx.addr[0] = EEPROM_MEM_ADDR >> 8;
packet_tx.addr[1] = EEPROM_MEM_ADDR;
packet_tx.addr_length = EEPROM_MEM_ADDR_LENGTH;
packet_tx.buffer = (uint8_t *) test_data_tx;
packet_tx.length = TEST_DATA_LENGTH;
/* Configure the data packet to be received */
packet_rx.chip = packet_tx.chip;
packet_rx.addr[0] = packet_tx.addr[0];
packet_rx.addr[1] = packet_tx.addr[1];
packet_rx.addr_length = packet_tx.addr_length;
packet_rx.buffer = gs_uc_test_data_rx;
packet_rx.length = packet_tx.length;
if (twihs_master_init(BOARD_BASE_TWIHS_EEPROM, &opt) != TWIHS_SUCCESS) {
puts("-E-\tTWI master initialization failed.\r");
while (1) {
/* Capture error */
}
}
/* Send test pattern to EEPROM */
if (twihs_master_write(BOARD_BASE_TWIHS_EEPROM, &packet_tx) != TWIHS_SUCCESS) {
puts("-E-\tTWI master write packet failed.\r");
while (1) {
/* Capture error */
}
}
puts("Write:\tOK!\n\r");
/* Wait at least 10 ms */
mdelay(WAIT_TIME);
/* Get memory from EEPROM*/
if (twihs_master_read(BOARD_BASE_TWIHS_EEPROM, &packet_rx) != TWIHS_SUCCESS) {
puts("-E-\tTWI master read packet failed.\r");
while (1) {
/* Capture error */
}
}
puts("Read:\tOK!\r");
/* Compare the sent and the received */
for (i = 0; i < TEST_DATA_LENGTH; i++) {
if (test_data_tx[i] != gs_uc_test_data_rx[i]) {
/* No match */
puts("Data comparison:\tUnmatched!\r");
while (1) {
/* Capture error */
}
}
}
/* Match */
puts("Data comparison:\tMatched!\r");
LED_On(LED0);
while (1) {
//.........这里部分代码省略.........
开发者ID:thegeek82000，项目名称:asf，代码行数:101，代码来源:twihs_master_example.c
示例15: ui_com_rx_stop
void ui_com_rx_stop(void)
{
LED_Off(LED3_GPIO);
}
开发者ID:Gr3yR0n1n，项目名称:SAINTCON-2015-Badge，代码行数:4，代码来源:ui.c
示例16: LED_Init
void LED_Init (void)
{
LED_Off(0); /* Turn off all of the LEDs */
}
开发者ID:Vanganesha，项目名称:oufffteam，代码行数:4，代码来源:bsp.c
示例17: ui_com_tx_stop
void ui_com_tx_stop(void)
{
LED_Off(LED2_GPIO);
}
开发者ID:Gr3yR0n1n，项目名称:SAINTCON-2015-Badge，代码行数:4，代码来源:ui.c
示例18: ui_com_rx_stop
void ui_com_rx_stop(void)
{
LED_Off(LED3);
}
开发者ID:kerichsen，项目名称:asf，代码行数:4，代码来源:ui.c
示例19: ui_process
void ui_process(uint16_t framenumber)
{
bool b_btn_state, success;
static bool btn_last_state = false;
static bool sequence_running = false;
static uint8_t u8_sequence_pos = 0;
uint8_t u8_value;
static uint16_t cpt_sof = 0;
if ((framenumber % 1000) == 0) {
LED_On(LED0);
}
if ((framenumber % 1000) == 500) {
LED_Off(LED0);
}
// Scan process running each 2ms
cpt_sof++;
if ((cpt_sof % 2) == 0) {
return;
}
// Buttons down to send keys sequence
b_btn_state = (!ioport_get_pin_level(GPIO_PUSH_BUTTON_0));
if (b_btn_state != btn_last_state) {
btn_last_state = b_btn_state;
if (btn_wakeup) {
if (!b_btn_state) {
btn_wakeup = false;
}
} else {
sequence_running = true;
}
}
// Sequence process running each period
if (SEQUENCE_PERIOD > cpt_sof) {
return;
}
cpt_sof = 0;
if (sequence_running) {
// Send next key
u8_value = ui_sequence[u8_sequence_pos].u8_value;
if (u8_value!=0) {
if (ui_sequence[u8_sequence_pos].b_modifier) {
if (ui_sequence[u8_sequence_pos].b_down) {
success = udi_hid_kbd_modifier_down(u8_value);
} else {
success = udi_hid_kbd_modifier_up(u8_value);
}
} else {
if (ui_sequence[u8_sequence_pos].b_down) {
success = udi_hid_kbd_down(u8_value);
} else {
success = udi_hid_kbd_up(u8_value);
}
}
if (!success) {
return; // Retry it on next schedule
}
}
// Valid sequence position
u8_sequence_pos++;
if (u8_sequence_pos >=
sizeof(ui_sequence) / sizeof(ui_sequence[0])) {
u8_sequence_pos = 0;
sequence_running = false;
}
}
}
开发者ID:Gr3yR0n1n，项目名称:SAINTCON-2015-Badge，代码行数:70，代码来源:ui.c
示例20: ui_powerdown
void ui_powerdown(void)
{
LED_Off(LED0);
LED_Off(LED1);
}
开发者ID:Timvrakas，项目名称:samd21_gcc，代码行数:5，代码来源:ui.c
注：本文中的LED_Off函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论