C++ K_D函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中K_D函数的典型用法代码示例。如果您正苦于以下问题：C++ K_D函数的具体用法？C++ K_D怎么用？C++ K_D使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了K_D函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: AbstractVideoOutput

AbstractVideoDataOutput::AbstractVideoDataOutput()
    : AbstractVideoOutput(*new AbstractVideoDataOutputPrivate)
{
    K_D(AbstractVideoDataOutput);
    d->isRunning = false;
    d->allowedFormats << VideoFrame2::Format_RGB888;
}

开发者ID:sandsmark，项目名称:phonon-visualization-gsoc，代码行数:7，代码来源:abstractvideodataoutput.cpp

示例2: K_D

void MediaControls::setMediaObject(MediaObject *media)
{
    K_D(MediaControls);
    if (d->media) {
        disconnect(d->media, SIGNAL(destroyed()), this, SLOT(_k_mediaDestroyed()));
        disconnect(d->media, SIGNAL(stateChanged(Phonon::State, Phonon::State)), this,
                   SLOT(_k_stateChanged(Phonon::State, Phonon::State)));
        disconnect(d->media, SIGNAL(finished()), this, SLOT(_k_finished()));
        disconnect(&d->playButton, SIGNAL(clicked()), d->media, SLOT(play()));
        disconnect(&d->pauseButton, SIGNAL(clicked()), d->media, SLOT(pause()));
        disconnect(&d->stopButton, SIGNAL(clicked()), d->media, SLOT(stop()));
    }
    d->media = media;
    if (media) {
        connect(media, SIGNAL(destroyed()), SLOT(_k_mediaDestroyed()));
        connect(media, SIGNAL(stateChanged(Phonon::State, Phonon::State)),
                SLOT(_k_stateChanged(Phonon::State, Phonon::State)));
        connect(d->media, SIGNAL(finished()), this, SLOT(_k_finished()));
        connect(&d->playButton, SIGNAL(clicked()), media, SLOT(play()));
        connect(&d->pauseButton, SIGNAL(clicked()), media, SLOT(pause()));
        connect(&d->stopButton, SIGNAL(clicked()), media, SLOT(stop()));
    }

    d->seekSlider.setMediaObject(media);
}

开发者ID:sandsmark，项目名称:phonon-visualization-gsoc，代码行数:25，代码来源:mediacontrols.cpp

示例3: QWidget

SeekSlider::SeekSlider(QWidget *parent)
    : QWidget(parent)
    , k_ptr(new SeekSliderPrivate(this))
{
    K_D(SeekSlider);
    connect(&d->slider, SIGNAL(valueChanged(int)), SLOT(_k_seek(int)));
}

开发者ID:yjfcool，项目名称:lyxcar，代码行数:7，代码来源:seekslider.cpp

示例4: K_D

void MediaObject::pause()
{
    K_D(MediaObject);
    if (d->backendObject() && d->mediaSource.type() != MediaSource::Invalid) {
        INTERFACE_CALL(pause());
    }
}

开发者ID:dfizban，项目名称:remixos-usb-tool，代码行数:7，代码来源:mediaobject.cpp

示例5: MediaNode

AbstractAudioDataOutput::AbstractAudioDataOutput()
    : MediaNode(*new AbstractAudioDataOutputPrivate)
{
    K_D(AbstractAudioDataOutput);
    d->isRunning = false;
    d->allowedFormats << AudioFormat();
}

开发者ID:sandsmark，项目名称:phonon-visualization-gsoc，代码行数:7，代码来源:abstractaudiodataoutput.cpp

示例6: K_D

void MediaObject::play()
{
    K_D(MediaObject);
    if (d->backendObject() && isPlayable(d->mediaSource.type())) {
        INTERFACE_CALL(play());
    }
}

开发者ID:sandsmark，项目名称:phonon-visualization-gsoc，代码行数:7，代码来源:mediaobject.cpp

示例7: pDebug

void VideoWidget::setFullScreen(bool newFullScreen)
{
    pDebug() << Q_FUNC_INFO << newFullScreen;
    K_D(VideoWidget);
    // TODO: disable screensaver? or should we leave that responsibility to the
    // application?
    Qt::WindowFlags flags = windowFlags();
    if (newFullScreen) {
        if (!isFullScreen()) {
            //we only update that value if it is not already fullscreen
            d->changeFlags = flags & (Qt::Window | Qt::SubWindow);
            flags |= Qt::Window;
            flags ^= Qt::SubWindow;
            setWindowFlags(flags);
#ifdef Q_WS_X11
            // This works around a bug with Compiz
            // as the window must be visible before we can set the state
            show();
            raise();
            setWindowState( windowState() | Qt::WindowFullScreen ); // set
#else
            setWindowState( windowState() | Qt::WindowFullScreen ); // set
            show();
#endif
        }
    } else if (isFullScreen()) {
        flags ^= (Qt::Window | Qt::SubWindow); //clear the flags...
        flags |= d->changeFlags; //then we reset the flags (window and subwindow)
        setWindowFlags(flags);
        setWindowState( windowState()  ^ Qt::WindowFullScreen ); // reset
        show();
    }
}

开发者ID:vilkov，项目名称:phonon-vlc-mplayer，代码行数:33，代码来源:videowidget.cpp

示例8: QObject

Effect::Effect(const EffectDescription &description, QObject *parent)
    : QObject(parent), MediaNode(*new EffectPrivate)
{
    K_D(Effect);
    d->description = description;
    d->createBackendObject();
}

开发者ID:vilkov，项目名称:phonon-vlc-mplayer，代码行数:7，代码来源:effect.cpp

示例9: QWidget

VideoWidget::VideoWidget(VideoWidgetPrivate &dd, QWidget *parent)
    : QWidget(parent),
    Phonon::AbstractVideoOutput(dd)
{
    K_D(VideoWidget);
    d->init();
}

开发者ID:vilkov，项目名称:phonon-vlc-mplayer，代码行数:7，代码来源:videowidget.cpp

示例10: K_D

void VolumeSlider::setMutedIcon(const QIcon &icon)
{
    K_D(VolumeSlider);
    pDebug() << Q_FUNC_INFO << icon;
    k_ptr->mutedIcon = icon;
    d->updateIcon();
}

开发者ID:vilkov，项目名称:phonon-vlc-mplayer，代码行数:7，代码来源:volumeslider.cpp

示例11: QWidget

VolumeSlider::VolumeSlider(AudioOutput *output, QWidget *parent)
    : QWidget(parent),
    k_ptr(new VolumeSliderPrivate(this))
{
    K_D(VolumeSlider);
#ifndef QT_NO_TOOLTIP
    setToolTip(tr("Volume: %1%").arg(100));
#endif
#ifndef QT_NO_WHATSTHIS
    setWhatsThis(tr("Use this slider to adjust the volume. The leftmost position is 0%, the rightmost is %1%").arg(100));
#endif

    connect(&d->slider, SIGNAL(valueChanged(int)), SLOT(_k_sliderChanged(int)));
    connect(&d->muteButton, SIGNAL(clicked()), SLOT(_k_buttonClicked()));

    if (output) {
        d->output = output;
        d->slider.setValue(qRound(100 * output->volume()));
        d->slider.setEnabled(true);
        d->muteButton.setEnabled(true);
        connect(output, SIGNAL(volumeChanged(qreal)), SLOT(_k_volumeChanged(qreal)));
        connect(output, SIGNAL(mutedChanged(bool)), SLOT(_k_mutedChanged(bool)));
    }

    setFocusProxy(&d->slider);
}

开发者ID:Fale，项目名称:qtmoko，代码行数:26，代码来源:volumeslider.cpp

示例12: K_D

QAction *KXmlGuiWindow::toolBarMenuAction()
{
    K_D(KXmlGuiWindow);
    if ( !d->toolBarHandler )
	return 0;

    return d->toolBarHandler->toolBarMenuAction();
}

开发者ID:crayonink，项目名称:calligra-2，代码行数:8，代码来源:kxmlguiwindow.cpp

示例13: K_D

void Effect::setParameterValue(const EffectParameter &param, const QVariant &newValue)
{
    K_D(Effect);
    d->parameterValues[param] = newValue;
    if (d->backendObject()) {
        INTERFACE_CALL(setParameterValue(param, newValue));
    }
}

开发者ID:vilkov，项目名称:phonon-vlc-mplayer，代码行数:8，代码来源:effect.cpp

示例14: QWidget

EffectWidget::EffectWidget(Effect *effect, QWidget *parent)
    : QWidget(parent),
    k_ptr(new EffectWidgetPrivate(effect))
{
    K_D(EffectWidget);
    d->q_ptr = this;
    d->autogenerateUi();
}

开发者ID:yjfcool，项目名称:lyxcar，代码行数:8，代码来源:effectwidget.cpp

示例15: K_D

void SeekSlider::setOrientation(Qt::Orientation o)
{
    K_D(SeekSlider);
    Qt::Alignment align = (o == Qt::Horizontal ? Qt::AlignVCenter : Qt::AlignHCenter);
    d->layout.setAlignment(&d->iconLabel, align);
    d->layout.setAlignment(&d->slider, align);
    d->layout.setDirection(o == Qt::Horizontal ? QBoxLayout::LeftToRight : QBoxLayout::TopToBottom);
    d->slider.setOrientation(o);
}

开发者ID:yjfcool，项目名称:lyxcar，代码行数:9，代码来源:seekslider.cpp

示例16: K_D

void VolumeSlider::setOrientation(Qt::Orientation o)
{
    K_D(VolumeSlider);
    Qt::Alignment align = (o == Qt::Horizontal ? Qt::AlignVCenter : Qt::AlignHCenter);
    d->layout.setAlignment(&d->muteButton, align);
    d->layout.setAlignment(&d->slider, align);
    d->layout.setDirection(o == Qt::Horizontal ? QBoxLayout::LeftToRight : QBoxLayout::TopToBottom);
    d->slider.setOrientation(o);
}

开发者ID:Fale，项目名称:qtmoko，代码行数:9，代码来源:volumeslider.cpp

示例17: KMainWindow

KXmlGuiWindow::KXmlGuiWindow( QWidget* parent, Qt::WindowFlags f )
    : KMainWindow(*new KXmlGuiWindowPrivate, parent, f), KXMLGUIBuilder( this )
{
    K_D(KXmlGuiWindow);
    d->showHelpMenu = true;
    d->toolBarHandler = 0;
    d->showStatusBarAction = 0;
    d->factory = 0;
    new KMainWindowInterface(this);
}

开发者ID:crayonink，项目名称:calligra-2，代码行数:10，代码来源:kxmlguiwindow.cpp

示例18: K_D

void AbstractAudioDataOutput::setRunning(bool running)
{
    K_D(AbstractAudioDataOutput);
    Iface<AudioDataOutputInterface> iface(d);
    if (iface) {
        if (running) {
            iface->setFrontendObject(this);
        } else {
            iface->setFrontendObject(0);
        }
    }
}

开发者ID:sandsmark，项目名称:phonon-visualization-gsoc，代码行数:12，代码来源:abstractaudiodataoutput.cpp

注：本文中的K_D函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。