C++ Joystick_Init函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Joystick_Init函数的典型用法代码示例。如果您正苦于以下问题：C++ Joystick_Init函数的具体用法？C++ Joystick_Init怎么用？C++ Joystick_Init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Joystick_Init函数的19个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int main(void)
{
    uint_reg_t Dummy;

    /* =============================
     *     Buttons Compile Check
     * ============================= */
    // cppcheck-suppress redundantAssignment
    Dummy = BUTTONS_BUTTON1;
    Buttons_Init();
    // cppcheck-suppress redundantAssignment
    Dummy = Buttons_GetStatus();
    Buttons_Disable();

    /* =============================
     *    Dataflash Compile Check
     * ============================= */
    // cppcheck-suppress redundantAssignment
    Dummy = DATAFLASH_TOTALCHIPS + DATAFLASH_NO_CHIP + DATAFLASH_CHIP1 + DATAFLASH_PAGE_SIZE + DATAFLASH_PAGES;
    Dataflash_Init();
    Dataflash_TransferByte(0);
    Dataflash_SendByte(0);
    // cppcheck-suppress redundantAssignment
    Dummy = Dataflash_ReceiveByte();
    // cppcheck-suppress redundantAssignment
    Dummy = Dataflash_GetSelectedChip();
    Dataflash_SelectChip(DATAFLASH_CHIP1);
    Dataflash_DeselectChip();
    Dataflash_SelectChipFromPage(0);
    Dataflash_ToggleSelectedChipCS();
    Dataflash_WaitWhileBusy();
    Dataflash_SendAddressBytes(0, 0);

    /* =============================
     *       LEDs Compile Check
     * ============================= */
    // cppcheck-suppress redundantAssignment
    Dummy = LEDS_LED1 + LEDS_LED2 + LEDS_LED3 + LEDS_LED4;
    LEDs_Init();
    LEDs_TurnOnLEDs(LEDS_ALL_LEDS);
    LEDs_TurnOffLEDs(LEDS_ALL_LEDS);
    LEDs_SetAllLEDs(LEDS_ALL_LEDS);
    LEDs_ChangeLEDs(LEDS_ALL_LEDS, LEDS_NO_LEDS);
    LEDs_ToggleLEDs(LEDS_ALL_LEDS);
    // cppcheck-suppress redundantAssignment
    Dummy = LEDs_GetLEDs();
    LEDs_Disable();

    /* =============================
     *     Joystick Compile Check
     * ============================= */
    // cppcheck-suppress redundantAssignment
    Dummy = JOY_LEFT + JOY_RIGHT + JOY_UP + JOY_DOWN + JOY_PRESS;
    Joystick_Init();
    // cppcheck-suppress redundantAssignment
    Dummy = Joystick_GetStatus();
    Joystick_Disable();

    (void)Dummy;
}

开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:60，代码来源:Test.c

示例2: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	LEDs_Init();
	Joystick_Init();
	Buttons_Init();
	SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
	Dataflash_Init();
	USB_Init();

	/* Check if the Dataflash is working, abort if not */
	if (!(DataflashManager_CheckDataflashOperation()))
	{
		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
		for(;;);
	}

	/* Clear Dataflash sector protections, if enabled */
	DataflashManager_ResetDataflashProtections();
}

开发者ID:DuinoPilot，项目名称:lufa，代码行数:28，代码来源:MassStorageKeyboard.c

示例3: main

/** Main program entry point. This routine configures the hardware required by the application, then
 *  starts the scheduler to run the application tasks.
 */
int main(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	Joystick_Init();
	LEDs_Init();
	Buttons_Init();
	
	/* Millisecond timer initialization, with output compare interrupt enabled for the idle timing */
	OCR0A  = 0x7D;
	TCCR0A = (1 << WGM01);
	TCCR0B = ((1 << CS01) | (1 << CS00));
	TIMSK0 = (1 << OCIE0A);

	/* Indicate USB not ready */
	UpdateStatus(Status_USBNotReady);
	
	/* Initialize Scheduler so that it can be used */
	Scheduler_Init();

	/* Initialize USB Subsystem */
	USB_Init();

	/* Scheduling - routine never returns, so put this last in the main function */
	Scheduler_Start();
}

开发者ID:hanshuebner，项目名称:ayce1，代码行数:35，代码来源:Mouse.c

示例4: main

/** Main program entry point. This routine configures the hardware required by the application, then
 *  starts the scheduler to run the application tasks.
 */
int main(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	Joystick_Init();
	LEDs_Init();
	Buttons_Init();
	
	/* Indicate USB not ready */
	UpdateStatus(Status_USBNotReady);
	
	/* Initialize Scheduler so that it can be used */
	Scheduler_Init();

	/* Initialize USB Subsystem */
	USB_Init();

	/* Scheduling - routine never returns, so put this last in the main function */
	Scheduler_Start();
}

开发者ID:unnamet，项目名称:estick-jtag，代码行数:29，代码来源:Joystick.c

示例5: main

/** Main program entry point. This routine configures the hardware required by the application, then
 *  starts the scheduler to run the USB management task.
 */
int main(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable Clock Division */
	SetSystemClockPrescaler(0);

	/* Hardware Initialization */
	Joystick_Init();
	LEDs_Init();
	HWB_Init();
	
	/* Millisecond timer initialization, with output compare interrupt enabled for the idle timing */
	OCR0A  = 0x7D;
	TCCR0A = (1 << WGM01);
	TCCR0B = ((1 << CS01) | (1 << CS00));
	TIMSK0 = (1 << OCIE0A);

	/* Indicate USB not ready */
	UpdateStatus(Status_USBNotReady);
	
	/* Initialize USB Subsystem */
	USB_Init();

	/* Main program code loop */
	for (;;)
	{
		/* No main code -- all USB code is interrupt driven */
	}
}

开发者ID:Limpinho0，项目名称:motmot-camtrig，代码行数:35，代码来源:MouseFullInt.c

示例6: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware()
{
#if (ARCH == ARCH_AVR8)
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);

	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);

	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif

	/* Hardware Initialization */
	Joystick_Init();
	LEDs_Init();
	USB_Init();
}

开发者ID:BirdBrainTechnologies，项目名称:HummingbirdDuoFirmware，代码行数:27，代码来源:KeyboardMouseMultiReport.c

示例7: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	bsp_init();
	LEDs_Init();
	Buttons_Init();
	Joystick_Init();
	USB_Init();
#if defined(USB_DEVICE_ROM_DRIVER)
	UsbdHid_Init();
#endif
	USB_Connect();
}

开发者ID:TCollier92，项目名称:HAPR，代码行数:13，代码来源:Mouse.c

示例8: main

int main(void)
{
	uint_reg_t Dummy;

	/* =============================
	 *     Buttons Compile Check
	 * ============================= */
	Buttons_Init();
	// cppcheck-suppress redundantAssignment
	Dummy = Buttons_GetStatus();
	Buttons_Disable();

	/* =============================
	 *    Dataflash Compile Check
	 * ============================= */
	Dataflash_Init();
	Dataflash_TransferByte(0);
	Dataflash_SendByte(0);
	// cppcheck-suppress redundantAssignment
	Dummy = Dataflash_ReceiveByte();
	// cppcheck-suppress redundantAssignment
	Dummy = Dataflash_GetSelectedChip();
	Dataflash_SelectChip(0);
	Dataflash_DeselectChip();
	Dataflash_SelectChipFromPage(0);
	Dataflash_ToggleSelectedChipCS();
	Dataflash_WaitWhileBusy();
	Dataflash_SendAddressBytes(0, 0);

	/* =============================
	 *       LEDs Compile Check
	 * ============================= */
	LEDs_Init();
	LEDs_TurnOnLEDs(LEDS_ALL_LEDS);
	LEDs_TurnOffLEDs(LEDS_ALL_LEDS);
	LEDs_SetAllLEDs(LEDS_ALL_LEDS);
	LEDs_ChangeLEDs(LEDS_ALL_LEDS, LEDS_NO_LEDS);
	LEDs_ToggleLEDs(LEDS_ALL_LEDS);
	// cppcheck-suppress redundantAssignment
	Dummy = LEDs_GetLEDs();
	LEDs_Disable();

	/* =============================
	 *     Joystick Compile Check
	 * ============================= */
	Joystick_Init();
	// cppcheck-suppress redundantAssignment
	Dummy = Joystick_GetStatus();
	Joystick_Disable();

	(void)Dummy;
}

开发者ID:chicagoedt，项目名称:Firmware，代码行数:52，代码来源:Test.c

示例9: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	Joystick_Init();
	LEDs_Init();
	USB_Init();
}

开发者ID:AmesianX，项目名称:OpenPCR，代码行数:15，代码来源:DualVirtualSerial.c

示例10: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	Joystick_Init();
	LEDs_Init();
	USB_Init();
	SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
}

开发者ID:Saectar，项目名称:manga-screen，代码行数:16，代码来源:VirtualSerialMouse.c

示例11: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	SerialStream_Init(9600, false);
	LEDs_Init();
	Joystick_Init();
	Buttons_Init();
	USB_Init(USB_MODE_UID);
}

开发者ID:emcute0319，项目名称:ir-usb-kbd，代码行数:17，代码来源:MouseHostDevice.c

示例12: main

int main(){
	int muxpin[4] = {19,18,17,16};

	Uart_Init(57600);
	Uart_Print("Uart Inited\n\r");

	SPI_InitMaster(16);
	Mux_Init(&MBMux,20,muxpin);
	Encoder_Init(&MBMux);
	Uart_Print("SPI Encoder Inited\n\r");

	Joystick_Init();
	GPIO_Init(31,OUTPUT);

	Timer_Init(0,100,Timer_Rountine);
	return 0;
}

开发者ID:RBC-CUHK，项目名称:RBC2011，代码行数:17，代码来源:main.c

示例13: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);
#endif

	/* Hardware Initialization */
	LEDs_Init();
	USB_Init();
	Joystick_Init();
	Buttons_Init();
}

开发者ID:abcminiuser，项目名称:lufa，代码行数:18，代码来源:MissileLauncher.c

示例14: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	LEDs_Init();
	Joystick_Init();
	SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
	Dataflash_Init();
	USB_Init();

	/* Clear Dataflash sector protections, if enabled */
	DataflashManager_ResetDataflashProtections();
}

开发者ID:Codingboy，项目名称:ucuni，代码行数:20，代码来源:VirtualSerialMassStorage.c

示例15: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	Serial_Init(9600, false);
	LEDs_Init();
	Joystick_Init();
	Buttons_Init();
	USB_Init(USB_MODE_UID);

	/* Create a stdio stream for the serial port for stdin and stdout */
	Serial_CreateStream(NULL);
}

开发者ID:davidk，项目名称:lufa-lib，代码行数:20，代码来源:MouseHostDevice.c

示例16: I_Init

boolean I_Init(void)
{
    if(initOk)
        return true; // Already initialized.

#ifdef __CLIENT__

    // Select drivers.
    iMouse = &qtMouse;
#ifdef WIN32
    iMouse = &win32Mouse;
    DirectInput_Init();
#endif

    Mouse_Init();
    Joystick_Init();

#endif // __CLIENT__

    initOk = true;
    return true;
}

开发者ID:cmbruns，项目名称:Doomsday-Engine，代码行数:22，代码来源:sys_input.cpp

示例17: main

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
 int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f4xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f4xx.c file
     */  
  /* Setup STM32 system (clock, PLL and Flash configuration) */
  SystemInit();
  
  /* GLCD init */
  GLCD_PowerUpInit((pInt8U)IAR_Logo.pPicStream);
  GLCD_Backlight(BACKLIGHT_ON);
  DelayResolution100us(5000);

  GLCD_PowerUpInit((pInt8U)STM32_Logo.pPicStream);
  GLCD_SetFont(&Terminal_9_12_6,0x000F00,0x00FF0);
  GLCD_TextSetPos(4,6);
  GLCD_print("STM32F407ZG-SK");
  GLCD_Backlight(BACKLIGHT_ON);
  
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
    
  /* Menu init */
  Menu_Init();
 
  Joystick_Init();
 
   
  DisplayMenu();
  
   
  /* Infinite loop */
  while (1)
  {
  }	
}

开发者ID:mskamoona，项目名称:IAR-STM32F407ZG-SK，代码行数:43，代码来源:main.c

示例18: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);

	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);

	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif

	/* Hardware Initialization */
	LEDs_Init();
	Joystick_Init();
	Buttons_Init();
	Dataflash_Init();
	USB_Init();

	/* Check if the Dataflash is working, abort if not */
	if (!(DataflashManager_CheckDataflashOperation()))
	{
		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
		for(;;);
	}

	/* Clear Dataflash sector protections, if enabled */
	DataflashManager_ResetDataflashProtections();
}

开发者ID:Steffen-Engel，项目名称:lufa，代码行数:39，代码来源:MassStorageKeyboard.c

示例19: SetupHardware

/** Configures the board hardware and chip peripherals for the demo's functionality. */
inline static void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	LEDs_Init();
	Buttons_Init();	//button HWB
	Joystick_Init();

	//gate driving output - PORTC.6 / PWM-A Timer3
	DDRC |= (1<<PC6);
	PORTC &= ~(1<<PC6);
	Init_PWM_timer();
	
	/* conversion mode (free running or single) and prescaler masks 
	 * ACDSRA: start ADC, clock prescaler, interrupt, trigger enable, start single conv */
	ADC_Init( ADC_SINGLE_CONVERSION | ADC_PRESCALE_128);	
	/* Must setup the ADC channel to read beforehand */
	ADC_SetupChannel(3);
	ADC_SetupChannel(4);
	
	/* Start the ADC conversion in free running mode 
	 * ADMUX and Vref, adjust, sel mux channel with gain
	 * 
	*/
	//ADC_StartReading(ADC_REFERENCE_INT2560MV | ADC_RIGHT_ADJUSTED | ADC_1100MV_BANDGAP);
	
	//Temperature_Init();
	//Dataflash_Init();
	SerialStream_Init(9600, false);

}

开发者ID:Maciej1975，项目名称:Histogram，代码行数:38，代码来源:adcRS.c

注：本文中的Joystick_Init函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。