C++ JPEG_DBG函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中JPEG_DBG函数的典型用法代码示例。如果您正苦于以下问题：C++ JPEG_DBG函数的具体用法？C++ JPEG_DBG怎么用？C++ JPEG_DBG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了JPEG_DBG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: msm_jpeg_subdev_release

void msm_jpeg_subdev_release(struct v4l2_subdev *jpeg_sd)
{
	int rc;
	struct msm_jpeg_device *pgmn_dev =
		(struct msm_jpeg_device *)jpeg_sd->host_priv;
	JPEG_DBG("%s:pgmn_dev=0x%lx", __func__, (unsigned long)pgmn_dev);
	rc = __msm_jpeg_release(pgmn_dev);
	JPEG_DBG("%s:rc=%d", __func__, rc);
}

开发者ID:Clumsy-Kernel-Development，项目名称:M9_Kernel，代码行数:9，代码来源:msm_jpeg_dev.c

示例2: msm_jpeg_set_init_dt_parms

/*
 * msm_jpeg_set_init_dt_parms() - get device tree config and write to registers.
 * @pgmn_dev: Pointer to jpeg device.
 * @dt_prop_name: Device tree property name.
 * @base: Base address.
 *
 * This function reads register offsets and values from dtsi based on
 * device tree property name and writes to jpeg registers.
 *
 * Return: 0 on success and negative error on failure.
 */
static int32_t msm_jpeg_set_init_dt_parms(struct msm_jpeg_device *pgmn_dev,
	const char *dt_prop_name,
	void *base)
{
	struct device_node *of_node;
	int32_t i = 0 , rc = 0;
	uint32_t *dt_reg_settings = NULL;
	uint32_t dt_count = 0;

	of_node = pgmn_dev->pdev->dev.of_node;
	JPEG_DBG("%s:%d E\n", __func__, __LINE__);

	if (!of_get_property(of_node, dt_prop_name,
				&dt_count)) {
		JPEG_DBG("%s: Error property does not exist\n",
				__func__);
		return -ENOENT;
	}
	if (dt_count % 8) {
		JPEG_PR_ERR("%s: Error invalid entries\n",
				__func__);
		return -EINVAL;
	}
	dt_count /= 4;
	if (dt_count != 0) {
		dt_reg_settings = kcalloc(dt_count, sizeof(uint32_t),
			GFP_KERNEL);
		if (!dt_reg_settings) {
			JPEG_PR_ERR("%s:%d No memory\n",
				__func__, __LINE__);
			return -ENOMEM;
		}
		rc = of_property_read_u32_array(of_node,
				dt_prop_name,
				dt_reg_settings,
				dt_count);
		if (rc < 0) {
			JPEG_PR_ERR("%s: No reg info\n",
				__func__);
			kfree(dt_reg_settings);
			return -EINVAL;
		}
		for (i = 0; i < dt_count; i = i + 2) {
			JPEG_DBG("%s:%d] %p %08x\n",
					__func__, __LINE__,
					base + dt_reg_settings[i],
					dt_reg_settings[i + 1]);
			msm_camera_io_w(dt_reg_settings[i + 1],
					base + dt_reg_settings[i]);
		}
		kfree(dt_reg_settings);
	}
	return 0;
}

开发者ID:sztablet2016，项目名称:Android-kernel-msm-3.10，代码行数:65，代码来源:msm_jpeg_platform.c

示例3: msm_jpeg_subdev_init

int msm_jpeg_subdev_init(struct v4l2_subdev *jpeg_sd)
{
	int rc;
	struct msm_jpeg_device *pgmn_dev =
		(struct msm_jpeg_device *)jpeg_sd->host_priv;

	JPEG_DBG("%s:%d: jpeg_sd=0x%x pgmn_dev=0x%x\n",
		__func__, __LINE__, (uint32_t)jpeg_sd, (uint32_t)pgmn_dev);
	rc = __msm_jpeg_open(pgmn_dev);
	JPEG_DBG("%s:%d: rc=%d\n",
		__func__, __LINE__, rc);
	return rc;
}

开发者ID:Arunvasu，项目名称:taoshan，代码行数:13，代码来源:msm_jpeg_dev.c

示例4: msm_jpeg_ioctl

static long msm_jpeg_ioctl(struct file *filp, unsigned int cmd,
	unsigned long arg)
{
	int rc;
	struct msm_jpeg_device *pgmn_dev = filp->private_data;

	JPEG_DBG("%s:%d] cmd=%d pgmn_dev=0x%x arg=0x%x\n", __func__,
		__LINE__, _IOC_NR(cmd), (uint32_t)pgmn_dev, (uint32_t)arg);

	rc = __msm_jpeg_ioctl(pgmn_dev, cmd, arg);

	JPEG_DBG("%s:%d]\n", __func__, __LINE__);
	return rc;
}

开发者ID:Arunvasu，项目名称:taoshan，代码行数:14，代码来源:msm_jpeg_dev.c

示例5: msm_jpeg_release

static int msm_jpeg_release(struct inode *inode, struct file *filp)
{
	int rc;

	struct msm_jpeg_device *pgmn_dev = filp->private_data;

	JPEG_DBG(KERN_INFO "%s:%d]\n", __func__, __LINE__);

	rc = __msm_jpeg_release(pgmn_dev);

	JPEG_DBG(KERN_INFO "%s:%d] %s open_count = %d\n", __func__, __LINE__,
		filp->f_path.dentry->d_name.name, pgmn_dev->open_count);
	return rc;
}

开发者ID:Arunvasu，项目名称:taoshan，代码行数:14，代码来源:msm_jpeg_dev.c

示例6: msm_jpeg_get_clk_info

static int msm_jpeg_get_clk_info(struct msm_jpeg_device *jpeg_dev,
	struct platform_device *pdev)
{
	uint32_t count;
	int i, rc;
	uint32_t rates[JPEG_CLK_INFO_MAX];

	struct device_node *of_node;
	of_node = pdev->dev.of_node;

	count = of_property_count_strings(of_node, "clock-names");

	JPEG_DBG("count = %d\n", count);
	if (count == 0) {
		pr_err("no clocks found in device tree, count=%d", count);
		return 0;
	}

	if (count > JPEG_CLK_INFO_MAX) {
		pr_err("invalid count=%d, max is %d\n", count,
			JPEG_CLK_INFO_MAX);
		return -EINVAL;
	}

	for (i = 0; i < count; i++) {
		rc = of_property_read_string_index(of_node, "clock-names",
				i, &(jpeg_8x_clk_info[i].clk_name));
		JPEG_DBG("clock-names[%d] = %s\n",
			 i, jpeg_8x_clk_info[i].clk_name);
		if (rc < 0) {
			pr_err("%s failed %d\n", __func__, __LINE__);
			return rc;
		}
	}
	rc = of_property_read_u32_array(of_node, "qcom,clock-rates",
		rates, count);
	if (rc < 0) {
		pr_err("%s failed %d\n", __func__, __LINE__);
		return rc;
	}
	for (i = 0; i < count; i++) {
		jpeg_8x_clk_info[i].clk_rate =
			(rates[i] == 0) ? -1 : rates[i];
		JPEG_DBG("clk_rate[%d] = %ld\n",
			i, jpeg_8x_clk_info[i].clk_rate);
	}
	jpeg_dev->num_clk = count;
	return 0;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:49，代码来源:msm_jpeg_platform.c

示例7: msm_jpeg_detach_iommu

static int msm_jpeg_detach_iommu(struct msm_jpeg_device *pgmn_dev)
{
	JPEG_DBG("%s:%d] handle %d detach\n",
			__func__, __LINE__, pgmn_dev->iommu_hdl);
	cam_smmu_ops(pgmn_dev->iommu_hdl, CAM_SMMU_DETACH);
	return 0;
}

开发者ID:sztablet2016，项目名称:Android-kernel-msm-3.10，代码行数:7，代码来源:msm_jpeg_platform.c

示例8: msm_jpeg_hw_irq_clear

void msm_jpeg_hw_irq_clear(uint32_t mask, uint32_t data, void *base)
{
	JPEG_DBG("%s:%d] mask %0x data %0x", __func__, __LINE__, mask, data);
	hw_cmd_irq_clear[0].mask = mask;
	hw_cmd_irq_clear[0].data = data;
	msm_jpeg_hw_write(&hw_cmd_irq_clear[0], base);
}

开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:7，代码来源:msm_jpeg_hw.c

示例9: msm_jpeg_platform_v2p

uint32_t msm_jpeg_platform_v2p(struct msm_jpeg_device *pgmn_dev, int fd,
	uint32_t len, int iommu_hdl)
{
	dma_addr_t paddr;
	size_t size;
	int rc;

	rc = cam_smmu_get_phy_addr(pgmn_dev->iommu_hdl, fd, CAM_SMMU_MAP_RW,
			&paddr, &size);
	JPEG_DBG("%s:%d] addr 0x%x size %zu", __func__, __LINE__,
		(uint32_t)paddr, size);

	if (rc < 0) {
		JPEG_PR_ERR("%s: fd %d got phy addr error %d\n", __func__, fd,
			rc);
		goto err_get_phy;
	}

	/* validate user input */
	if (len > size) {
		JPEG_PR_ERR("%s: invalid offset + len\n", __func__);
		goto err_size;
	}

	return paddr;
err_size:
	cam_smmu_put_phy_addr(pgmn_dev->iommu_hdl, fd);
err_get_phy:
	return 0;
}

开发者ID:sztablet2016，项目名称:Android-kernel-msm-3.10，代码行数:30，代码来源:msm_jpeg_platform.c

示例10: msm_jpeg_platform_set_clk_rate

int msm_jpeg_platform_set_clk_rate(struct msm_jpeg_device *pgmn_dev,
		long clk_rate)
{
	int rc = 0;
	struct clk *jpeg_clk;

	jpeg_clk = clk_get(&pgmn_dev->pdev->dev, "core_clk");
	if (IS_ERR(jpeg_clk)) {
		JPEG_PR_ERR("%s get failed\n", "core_clk");
		rc = PTR_ERR(jpeg_clk);
		goto error;
	}

	clk_rate = clk_round_rate(jpeg_clk, clk_rate);
	if (clk_rate < 0) {
		JPEG_PR_ERR("%s:%d] round rate failed", __func__, __LINE__);
		rc = -EINVAL;
		goto error;
	}
	JPEG_DBG("%s:%d] jpeg clk rate %ld", __func__, __LINE__, clk_rate);

	rc = clk_set_rate(jpeg_clk, clk_rate);

error:
	return rc;
}

开发者ID:AudioGod，项目名称:Gods_kernel_yu_msm8916，代码行数:26，代码来源:msm_jpeg_platform.c

示例11: msm_jpeg_subdev_ioctl

static long msm_jpeg_subdev_ioctl(struct v4l2_subdev *sd,
	unsigned int cmd, void *arg)
{
	long rc;
	struct msm_jpeg_device *pgmn_dev =
		(struct msm_jpeg_device *)sd->host_priv;

	JPEG_DBG("%s: cmd=%d\n", __func__, cmd);

	JPEG_DBG("%s: pgmn_dev 0x%lx", __func__, (unsigned long)pgmn_dev);

	JPEG_DBG("%s: Calling __msm_jpeg_ioctl\n", __func__);

	rc = __msm_jpeg_ioctl(pgmn_dev, cmd, (unsigned long)arg);
	pr_debug("%s: X\n", __func__);
	return rc;
}

开发者ID:Clumsy-Kernel-Development，项目名称:M9_Kernel，代码行数:17，代码来源:msm_jpeg_dev.c

示例12: msm_jpeg_open

static int msm_jpeg_open(struct inode *inode, struct file *filp)
{
	int rc = 0;

	struct msm_jpeg_device *pgmn_dev = container_of(inode->i_cdev,
		struct msm_jpeg_device, cdev);
	filp->private_data = pgmn_dev;

	JPEG_DBG("%s:%d]\n", __func__, __LINE__);

	rc = __msm_jpeg_open(pgmn_dev);

	JPEG_DBG(KERN_INFO "%s:%d] %s open_count = %d\n", __func__, __LINE__,
		filp->f_path.dentry->d_name.name, pgmn_dev->open_count);

	return rc;
}

开发者ID:Arunvasu，项目名称:taoshan，代码行数:17，代码来源:msm_jpeg_dev.c

示例13: msm_jpeg_q_init

inline void msm_jpeg_q_init(char const *name, struct msm_jpeg_q *q_p)
{
	JPEG_DBG("%s:%d] %s\n", __func__, __LINE__, name);
	q_p->name = name;
	spin_lock_init(&q_p->lck);
	INIT_LIST_HEAD(&q_p->q);
	init_waitqueue_head(&q_p->wait);
	q_p->unblck = 0;
}

开发者ID:98416，项目名称:Z7Max_NX505J_H129_kernel，代码行数:9，代码来源:msm_jpeg_sync.c

示例14: msm_jpeg_platform_release

int msm_jpeg_platform_release(struct resource *mem, void *base, int irq,
	void *context)
{
	int result = 0;
	int i = 0;
	struct msm_jpeg_device *pgmn_dev =
		(struct msm_jpeg_device *) context;

	free_irq(irq, context);

#ifdef CONFIG_MSM_IOMMU
	for (i = 0; i < pgmn_dev->iommu_cnt; i++) {
		iommu_detach_device(pgmn_dev->domain,
				pgmn_dev->iommu_ctx_arr[i]);
		JPEG_DBG("%s:%d]", __func__, __LINE__);
	}
#endif
	if (pgmn_dev->jpeg_bus_client) {
		msm_bus_scale_client_update_request(
			pgmn_dev->jpeg_bus_client, 0);
		msm_bus_scale_unregister_client(pgmn_dev->jpeg_bus_client);
	}

	msm_cam_clk_enable(&pgmn_dev->pdev->dev, jpeg_8x_clk_info,
	pgmn_dev->jpeg_clk, ARRAY_SIZE(jpeg_8x_clk_info), 0);
	JPEG_DBG("%s:%d] clock disbale done", __func__, __LINE__);

	if (pgmn_dev->jpeg_fs) {
		result = regulator_disable(pgmn_dev->jpeg_fs);
		if (!result)
			regulator_put(pgmn_dev->jpeg_fs);
		else
			JPEG_PR_ERR("%s:%d] regulator disable failed %d",
				__func__, __LINE__, result);
		pgmn_dev->jpeg_fs = NULL;
	}
	iounmap(pgmn_dev->jpeg_vbif);
	iounmap(base);
	release_mem_region(mem->start, resource_size(mem));
	ion_client_destroy(pgmn_dev->jpeg_client);
	pgmn_dev->state = MSM_JPEG_IDLE;
	JPEG_DBG("%s:%d] success\n", __func__, __LINE__);
	return result;
}

开发者ID:BlackSoulxxx，项目名称:XerXes，代码行数:44，代码来源:msm_jpeg_platform.c

示例15: msm_jpeg_attach_iommu

static int msm_jpeg_attach_iommu(struct msm_jpeg_device *pgmn_dev)
{
	int rc;
	rc = cam_smmu_ops(pgmn_dev->iommu_hdl, CAM_SMMU_ATTACH);
	if (rc < 0) {
		JPEG_PR_ERR("%s: Device attach failed\n", __func__);
		return -ENODEV;
	}
	JPEG_DBG("%s:%d] handle %d attach\n",
			__func__, __LINE__, pgmn_dev->iommu_hdl);
	return 0;
}

开发者ID:sztablet2016，项目名称:Android-kernel-msm-3.10，代码行数:12，代码来源:msm_jpeg_platform.c

示例16: msm_jpegdma_hw_irq_clear

void msm_jpegdma_hw_irq_clear(uint32_t mask, uint32_t data, void *base)
{
    struct msm_jpeg_hw_cmd cmd_irq_clear;

    cmd_irq_clear.type = MSM_JPEG_HW_CMD_TYPE_WRITE;
    cmd_irq_clear.n = 1;
    cmd_irq_clear.offset = JPEGDMA_IRQ_CLEAR_ADDR;
    cmd_irq_clear.mask = mask;
    cmd_irq_clear.data = data;
    JPEG_DBG("%s:%d] mask %0x data %0x", __func__, __LINE__, mask, data);
    msm_jpeg_hw_write(&cmd_irq_clear, base);
}

开发者ID:TeamRegular，项目名称:android_kernel_lge_msm8992，代码行数:12，代码来源:msm_jpeg_hw.c

示例17: msm_jpeg_detach_iommu

static int msm_jpeg_detach_iommu(struct msm_jpeg_device *pgmn_dev)
{
	int i;

	for (i = 0; i < pgmn_dev->iommu_cnt; i++) {
		JPEG_DBG("%s:%d] dom 0x%lx ctx 0x%lx", __func__, __LINE__,
				(unsigned long)pgmn_dev->domain,
				(unsigned long)pgmn_dev->iommu_ctx_arr[i]);
		iommu_detach_device(pgmn_dev->domain,
				pgmn_dev->iommu_ctx_arr[i]);
	}
	return 0;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:13，代码来源:msm_jpeg_platform.c

示例18: msm_jpeg_platform_release

int msm_jpeg_platform_release(struct resource *mem, void *base, int irq,
	void *context)
{
	int result = 0;

	struct msm_jpeg_device *pgmn_dev =
		(struct msm_jpeg_device *) context;

	free_irq(irq, context);

	msm_jpeg_detach_iommu(pgmn_dev);

	if (pgmn_dev->jpeg_bus_client) {
		msm_bus_scale_client_update_request(
			pgmn_dev->jpeg_bus_client, 0);
		msm_bus_scale_unregister_client(pgmn_dev->jpeg_bus_client);
	}

	msm_cam_clk_enable(&pgmn_dev->pdev->dev, pgmn_dev->jpeg_clk_info,
	pgmn_dev->jpeg_clk, pgmn_dev->num_clk, 0);
	JPEG_DBG("%s:%d] clock disbale done", __func__, __LINE__);

	if (pgmn_dev->jpeg_fs) {
		result = regulator_disable(pgmn_dev->jpeg_fs);
		if (!result)
			regulator_put(pgmn_dev->jpeg_fs);
		else
			JPEG_PR_ERR("%s:%d] regulator disable failed %d",
				__func__, __LINE__, result);
		pgmn_dev->jpeg_fs = NULL;
	}
	iounmap(pgmn_dev->jpeg_vbif);
	iounmap(base);
	release_mem_region(mem->start, resource_size(mem));
	ion_client_destroy(pgmn_dev->jpeg_client);
	pgmn_dev->state = MSM_JPEG_IDLE;
	JPEG_DBG("%s:%d] success\n", __func__, __LINE__);
	return result;
}

开发者ID:AudioGod，项目名称:Gods_kernel_yu_msm8916，代码行数:39，代码来源:msm_jpeg_platform.c

示例19: JPEG_DBG

inline void *msm_jpeg_q_out(struct msm_jpeg_q *q_p)
{
	unsigned long flags;
	struct msm_jpeg_q_entry *q_entry_p = NULL;
	void *data = NULL;

	JPEG_DBG("%s:%d] %s\n", __func__, __LINE__, q_p->name);
	spin_lock_irqsave(&q_p->lck, flags);
	if (!list_empty(&q_p->q)) {
		q_entry_p = list_first_entry(&q_p->q, struct msm_jpeg_q_entry,
			list);
		list_del_init(&q_entry_p->list);
	}

开发者ID:98416，项目名称:Z7Max_NX505J_H129_kernel，代码行数:13，代码来源:msm_jpeg_sync.c

示例20: msm_jpeg_platform_release

int msm_jpeg_platform_release(void *context)
{
	int result = 0;

	struct msm_jpeg_device *pgmn_dev =
		(struct msm_jpeg_device *) context;

	/* release the irq */
	msm_camera_unregister_irq(pgmn_dev->pdev,
		pgmn_dev->jpeg_irq_res, context);

	msm_jpeg_detach_iommu(pgmn_dev);

	if (pgmn_dev->bus_client) {
		if (pgmn_dev->jpeg_bus_vote) {
			/* update the bw with zeroth vector */
			msm_camera_update_bus_vector(pgmn_dev->bus_client, 0);
			JPEG_BUS_UNVOTED(pgmn_dev);
			JPEG_DBG("%s:%d] Bus unvoted\n", __func__, __LINE__);
		}
	}

	/* disable all the clocks */
	msm_camera_clk_enable(&pgmn_dev->pdev->dev, pgmn_dev->jpeg_clk_info,
		pgmn_dev->jpeg_clk, pgmn_dev->num_clk, false);
	JPEG_DBG("%s:%d] clock disbale done", __func__, __LINE__);

	/* disable all the regulators */
	msm_camera_regulator_enable(pgmn_dev->jpeg_vdd,
		pgmn_dev->num_reg, false);
	JPEG_DBG("%s:%d] regulator disable done", __func__, __LINE__);

	pgmn_dev->state = MSM_JPEG_IDLE;
	JPEG_DBG("%s:%d] success\n", __func__, __LINE__);
	return result;
}

开发者ID:sztablet2016，项目名称:Android-kernel-msm-3.10，代码行数:36，代码来源:msm_jpeg_platform.c

注：本文中的JPEG_DBG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ JPEG_MSG函数代码示例发布时间：2022-05-30

C++ JNU_ThrowOutOfMemoryError函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19231|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8645|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9667|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ JPEG_DBG函数代码示例

示例1: msm_jpeg_subdev_release

示例2: msm_jpeg_set_init_dt_parms

示例3: msm_jpeg_subdev_init

示例4: msm_jpeg_ioctl

示例5: msm_jpeg_release

示例6: msm_jpeg_get_clk_info

示例7: msm_jpeg_detach_iommu

示例8: msm_jpeg_hw_irq_clear

示例9: msm_jpeg_platform_v2p

示例10: msm_jpeg_platform_set_clk_rate

示例11: msm_jpeg_subdev_ioctl

示例12: msm_jpeg_open

示例13: msm_jpeg_q_init

示例14: msm_jpeg_platform_release

示例15: msm_jpeg_attach_iommu

示例16: msm_jpegdma_hw_irq_clear

示例17: msm_jpeg_detach_iommu

示例18: msm_jpeg_platform_release

示例19: JPEG_DBG

示例20: msm_jpeg_platform_release

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

adafruit/DHT-sensor-library: Arduino lib

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053