• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ JFS_SBI函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中JFS_SBI函数的典型用法代码示例。如果您正苦于以下问题:C++ JFS_SBI函数的具体用法?C++ JFS_SBI怎么用?C++ JFS_SBI使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了JFS_SBI函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: jfs_mount_rw

/*
 * NAME:	jfs_mount_rw(sb, remount)
 *
 * FUNCTION:	Completes read-write mount, or remounts read-only volume
 *		as read-write
 */
int jfs_mount_rw(struct super_block *sb, int remount)
{
	struct jfs_sb_info *sbi = JFS_SBI(sb);  
	struct jfs_log *log;
	int rc;

	/*
	 * If we are re-mounting a previously read-only volume, we want to
	 * re-read the inode and block maps, since fsck.jfs may have updated
	 * them.
	 */
	if (remount) {
		if (chkSuper(sb) || (sbi->state != FM_CLEAN))
			return -EINVAL;

		truncate_inode_pages(sbi->ipimap->i_mapping, 0);
		truncate_inode_pages(sbi->ipbmap->i_mapping, 0);
		diUnmount(sbi->ipimap, 1);
		if ((rc = diMount(sbi->ipimap))) {
			jfs_err("jfs_mount_rw: diMount failed!");
			return rc;
		}

		dbUnmount(sbi->ipbmap, 1);
		if ((rc = dbMount(sbi->ipbmap))) {
			jfs_err("jfs_mount_rw: dbMount failed!");
			return rc;
		}
	}

	/*
	 * open/initialize log
	 */
	if ((rc = lmLogOpen(sb, &log)))
		return rc;

	JFS_SBI(sb)->log = log;

	/*
	 * update file system superblock;
	 */
	if ((rc = updateSuper(sb, FM_MOUNT))) {
		jfs_err("jfs_mount: updateSuper failed w/rc = %d", rc);
		lmLogClose(sb, log);
		JFS_SBI(sb)->log = 0;
		return rc;
	}

	/*
	 * write MOUNT log record of the file system
	 */
	logMOUNT(sb);

	return rc;
}
开发者ID:SimonKagstrom,项目名称:mci500h-linux-2.4.27,代码行数:61,代码来源:jfs_mount.c


示例2: jfs_info

static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struct nameidata *nd)
{
	struct btstack btstack;
	ino_t inum;
	struct inode *ip;
	struct component_name key;
	const char *name = dentry->d_name.name;
	int len = dentry->d_name.len;
	int rc;

	jfs_info("jfs_lookup: name = %s", name);


	if ((name[0] == '.') && (len == 1))
		inum = dip->i_ino;
	else if (strcmp(name, "..") == 0)
		inum = PARENT(dip);
	else {
		if ((rc = get_UCSname(&key, dentry)))
			return ERR_PTR(rc);
		rc = dtSearch(dip, &key, &inum, &btstack, JFS_LOOKUP);
		free_UCSname(&key);
		if (rc == -ENOENT) {
			d_add(dentry, NULL);
			return ERR_PTR(0);
		} else if (rc) {
			jfs_err("jfs_lookup: dtSearch returned %d", rc);
			return ERR_PTR(rc);
		}
	}

	ip = iget(dip->i_sb, inum);
	if (ip == NULL || is_bad_inode(ip)) {
		jfs_err("jfs_lookup: iget failed on inum %d", (uint) inum);
		if (ip)
			iput(ip);
		return ERR_PTR(-EACCES);
	}

	if (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2)
		dentry->d_op = &jfs_ci_dentry_operations;

	dentry = d_splice_alias(ip, dentry);

	if (dentry && (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2))
		dentry->d_op = &jfs_ci_dentry_operations;

	return dentry;
}
开发者ID:kzlin129,项目名称:tt-gpl,代码行数:49,代码来源:namei.c


示例3: jfs_clear_inode

void jfs_clear_inode(struct inode *inode)
{
	struct jfs_inode_info *ji = JFS_IP(inode);

	if (is_bad_inode(inode))
		/*
		 * We free the fs-dependent structure before making the
		 * inode bad
		 */
		return;

	jfs_info("jfs_clear_inode called ip = 0x%p", inode);

	if (ji->active_ag != -1) {
		struct bmap *bmap = JFS_SBI(inode->i_sb)->bmap;
		atomic_dec(&bmap->db_active[ji->active_ag]);
	}

	ASSERT(list_empty(&ji->anon_inode_list));

	if (ji->atlhead) {
		jfs_err("jfs_clear_inode: inode %p has anonymous tlocks",
			inode);
		jfs_err("i_state = 0x%lx, cflag = 0x%lx", inode->i_state,
			ji->cflag);
	}

	free_jfs_inode(inode);
}
开发者ID:iPodLinux,项目名称:linux-2.4.24-ipod,代码行数:29,代码来源:inode.c


示例4: jfs_open

static int jfs_open(struct inode *inode, struct file *file)
{
	int rc;

	if ((rc = dquot_file_open(inode, file)))
		return rc;

	/*
	 * We attempt to allow only one "active" file open per aggregate
	 * group.  Otherwise, appending to files in parallel can cause
	 * fragmentation within the files.
	 *
	 * If the file is empty, it was probably just created and going
	 * to be written to.  If it has a size, we'll hold off until the
	 * file is actually grown.
	 */
	if (S_ISREG(inode->i_mode) && file->f_mode & FMODE_WRITE &&
	    (inode->i_size == 0)) {
		struct jfs_inode_info *ji = JFS_IP(inode);
		spin_lock_irq(&ji->ag_lock);
		if (ji->active_ag == -1) {
			struct jfs_sb_info *jfs_sb = JFS_SBI(inode->i_sb);
			ji->active_ag = BLKTOAG(addressPXD(&ji->ixpxd), jfs_sb);
			atomic_inc( &jfs_sb->bmap->db_active[ji->active_ag]);
		}
		spin_unlock_irq(&ji->ag_lock);
	}

	return 0;
}
开发者ID:Abioy,项目名称:kasan,代码行数:30,代码来源:file.c


示例5: jfs_umount_rw

int jfs_umount_rw(struct super_block *sb)
{
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct jfs_log *log = sbi->log;

	if (!log)
		return 0;

	/*
	 * close log: 
	 *
	 * remove file system from log active file system list.
	 */
	jfs_flush_journal(log, 2);

	/*
	 * Make sure all metadata makes it to disk
	 */
	dbSync(sbi->ipbmap);
	diSync(sbi->ipimap);
	fsync_inode_data_buffers(sb->s_bdev->bd_inode);

	updateSuper(sb, FM_CLEAN);
	sbi->log = NULL;

	return lmLogClose(sb, log);
}
开发者ID:JBTech,项目名称:ralink_rt5350,代码行数:27,代码来源:jfs_umount.c


示例6: jfs_umount_rw

int jfs_umount_rw(struct super_block *sb)
{
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct jfs_log *log = sbi->log;

	if (!log)
		return 0;

	/*
	 * close log:
	 *
	 * remove file system from log active file system list.
	 */
	jfs_flush_journal(log, 1);

	/*
	 * Make sure all metadata makes it to disk
	 */
	dbSync(sbi->ipbmap);
	diSync(sbi->ipimap);

	/*
	 * Note that we have to do this even if sync_blockdev() will
	 * do exactly the same a few instructions later:  We can't
	 * mark the superblock clean before everything is flushed to
	 * disk.
	 */
	filemap_write_and_wait(sbi->direct_inode->i_mapping);

	updateSuper(sb, FM_CLEAN);

	return lmLogClose(sb);
}
开发者ID:johnny,项目名称:CobraDroidBeta,代码行数:33,代码来源:jfs_umount.c


示例7: jfs_release

static int jfs_release(struct inode *inode, struct file *file)
{
	struct jfs_inode_info *ji = JFS_IP(inode);

	if (ji->active_ag != -1) {
		struct bmap *bmap = JFS_SBI(inode->i_sb)->bmap;
		atomic_dec(&bmap->db_active[ji->active_ag]);
		ji->active_ag = -1;
	}

	return 0;
}
开发者ID:iPodLinux,项目名称:linux-2.6.7-ipod,代码行数:12,代码来源:file.c


示例8: jfs_umount

int jfs_umount(struct super_block *sb)
{
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct inode *ipbmap = sbi->ipbmap;
	struct inode *ipimap = sbi->ipimap;
	struct inode *ipaimap = sbi->ipaimap;
	struct inode *ipaimap2 = sbi->ipaimap2;
	struct jfs_log *log;
	int rc = 0;

	jfs_info("UnMount JFS: sb:0x%p", sb);

	if ((log = sbi->log))
		/*
		 * Wait for outstanding transactions to be written to log:
		 */
		jfs_flush_journal(log, 2);

	diUnmount(ipimap, 0);

	diFreeSpecial(ipimap);
	sbi->ipimap = NULL;

	ipaimap2 = sbi->ipaimap2;
	if (ipaimap2) {
		diUnmount(ipaimap2, 0);
		diFreeSpecial(ipaimap2);
		sbi->ipaimap2 = NULL;
	}

	ipaimap = sbi->ipaimap;
	diUnmount(ipaimap, 0);
	diFreeSpecial(ipaimap);
	sbi->ipaimap = NULL;

	dbUnmount(ipbmap, 0);

	diFreeSpecial(ipbmap);
	sbi->ipimap = NULL;

	filemap_write_and_wait(sbi->direct_inode->i_mapping);

	if (log) {		
		updateSuper(sb, FM_CLEAN);

		rc = lmLogClose(sb);
	}
	jfs_info("UnMount JFS Complete: rc = %d", rc);
	return rc;
}
开发者ID:MiniBlu,项目名称:cm11_kernel_htc_msm8974a3ul,代码行数:50,代码来源:jfs_umount.c


示例9: updateSuper

/*
 *	updateSuper()
 *
 * update synchronously superblock if it is mounted read-write.
 */
int updateSuper(struct super_block *sb, uint state)
{
	struct jfs_superblock *j_sb;
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct buffer_head *bh;
	int rc;

	if (sbi->flag & JFS_NOINTEGRITY) {
		if (state == FM_DIRTY) {
			sbi->p_state = state;
			return 0;
		} else if (state == FM_MOUNT) {
			sbi->p_state = sbi->state;
			state = FM_DIRTY;
		} else if (state == FM_CLEAN) {
			state = sbi->p_state;
		} else
			jfs_err("updateSuper: bad state");
	} else if (sbi->state == FM_DIRTY)
		return 0;
	
	if ((rc = readSuper(sb, &bh)))
		return rc;

	j_sb = (struct jfs_superblock *)bh->b_data;

	j_sb->s_state = cpu_to_le32(state);
	sbi->state = state;

	if (state == FM_MOUNT) {
		/* record log's dev_t and mount serial number */
		j_sb->s_logdev = cpu_to_le32(sbi->log->bdev->bd_dev);
		j_sb->s_logserial = cpu_to_le32(sbi->log->serial);
	} else if (state == FM_CLEAN) {
		/*
		 * If this volume is shared with OS/2, OS/2 will need to
		 * recalculate DASD usage, since we don't deal with it.
		 */
		if (j_sb->s_flag & cpu_to_le32(JFS_DASD_ENABLED))
			j_sb->s_flag |= cpu_to_le32(JFS_DASD_PRIME);
	}

	mark_buffer_dirty(bh);
	ll_rw_block(WRITE, 1, &bh);
	wait_on_buffer(bh);
	brelse(bh);

	return 0;
}
开发者ID:SimonKagstrom,项目名称:mci500h-linux-2.4.27,代码行数:54,代码来源:jfs_mount.c


示例10: jfs_fsync

int jfs_fsync(struct file *file, struct dentry *dentry, int datasync)
{
	struct inode *inode = dentry->d_inode;
	int rc = 0;

	if (!(inode->i_state & I_DIRTY) ||
	    (datasync && !(inode->i_state & I_DIRTY_DATASYNC))) {
		/* Make sure committed changes hit the disk */
		jfs_flush_journal(JFS_SBI(inode->i_sb)->log, 1);
		return rc;
	}

	rc |= jfs_commit_inode(inode, 1);

	return rc ? -EIO : 0;
}
开发者ID:325116067,项目名称:semc-qsd8x50,代码行数:16,代码来源:file.c


示例11: updateSuper

int updateSuper(struct super_block *sb, uint state)
{
	struct jfs_superblock *j_sb;
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct buffer_head *bh;
	int rc;

	if (sbi->flag & JFS_NOINTEGRITY) {
		if (state == FM_DIRTY) {
			sbi->p_state = state;
			return 0;
		} else if (state == FM_MOUNT) {
			sbi->p_state = sbi->state;
			state = FM_DIRTY;
		} else if (state == FM_CLEAN) {
			state = sbi->p_state;
		} else
			jfs_err("updateSuper: bad state");
	} else if (sbi->state == FM_DIRTY)
		return 0;

	if ((rc = readSuper(sb, &bh)))
		return rc;

	j_sb = (struct jfs_superblock *)bh->b_data;

	j_sb->s_state = cpu_to_le32(state);
	sbi->state = state;

	if (state == FM_MOUNT) {
		
		j_sb->s_logdev = cpu_to_le32(new_encode_dev(sbi->log->bdev->bd_dev));
		j_sb->s_logserial = cpu_to_le32(sbi->log->serial);
	} else if (state == FM_CLEAN) {
		if (j_sb->s_flag & cpu_to_le32(JFS_DASD_ENABLED))
			j_sb->s_flag |= cpu_to_le32(JFS_DASD_PRIME);
	}

	mark_buffer_dirty(bh);
	sync_dirty_buffer(bh);
	brelse(bh);

	return 0;
}
开发者ID:ra0710,项目名称:PsycoKernel,代码行数:44,代码来源:jfs_mount.c


示例12: jfs_umount_rw

int jfs_umount_rw(struct super_block *sb)
{
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct jfs_log *log = sbi->log;

	if (!log)
		return 0;

	jfs_flush_journal(log, 2);

	dbSync(sbi->ipbmap);
	diSync(sbi->ipimap);

	filemap_write_and_wait(sbi->direct_inode->i_mapping);

	updateSuper(sb, FM_CLEAN);

	return lmLogClose(sb);
}
开发者ID:MiniBlu,项目名称:cm11_kernel_htc_msm8974a3ul,代码行数:19,代码来源:jfs_umount.c


示例13: jfs_write_inode

void jfs_write_inode(struct inode *inode, int wait)
{
	if (test_cflag(COMMIT_Nolink, inode))
		return;
	/*
	 * If COMMIT_DIRTY is not set, the inode isn't really dirty.
	 * It has been committed since the last change, but was still
	 * on the dirty inode list.
	 */
	 if (!test_cflag(COMMIT_Dirty, inode)) {
		/* Make sure committed changes hit the disk */
		jfs_flush_journal(JFS_SBI(inode->i_sb)->log, wait);
		return;
	 }

	if (jfs_commit_inode(inode, wait)) {
		jfs_err("jfs_write_inode: jfs_commit_inode failed!");
	}
}
开发者ID:iPodLinux,项目名称:linux-2.4.24-ipod,代码行数:19,代码来源:inode.c


示例14: jfs_fsync

int jfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
	struct inode *inode = file->f_mapping->host;
	int rc = 0;

	rc = filemap_write_and_wait_range(inode->i_mapping, start, end);
	if (rc)
		return rc;

	mutex_lock(&inode->i_mutex);
	if (!(inode->i_state & I_DIRTY_ALL) ||
	    (datasync && !(inode->i_state & I_DIRTY_DATASYNC))) {
		/* Make sure committed changes hit the disk */
		jfs_flush_journal(JFS_SBI(inode->i_sb)->log, 1);
		mutex_unlock(&inode->i_mutex);
		return rc;
	}

	rc |= jfs_commit_inode(inode, 1);
	mutex_unlock(&inode->i_mutex);

	return rc ? -EIO : 0;
}
开发者ID:Abioy,项目名称:kasan,代码行数:23,代码来源:file.c


示例15: jfs_write_inode

int jfs_write_inode(struct inode *inode, struct writeback_control *wbc)
{
	int wait = 1; /* XXX fix fsync and use wbc->sync_mode == WB_SYNC_ALL; */

	if (test_cflag(COMMIT_Nolink, inode))
		return 0;
	/*
	 * If COMMIT_DIRTY is not set, the inode isn't really dirty.
	 * It has been committed since the last change, but was still
	 * on the dirty inode list.
	 */
	 if (!test_cflag(COMMIT_Dirty, inode)) {
		/* Make sure committed changes hit the disk */
		jfs_flush_journal(JFS_SBI(inode->i_sb)->log, wait);
		return 0;
	 }

	if (jfs_commit_inode(inode, wait)) {
		jfs_err("jfs_write_inode: jfs_commit_inode failed!");
		return -EIO;
	} else
		return 0;
}
开发者ID:marc1706,项目名称:desire_kernel_35,代码行数:23,代码来源:inode.c


示例16: jfs_mount_rw

int jfs_mount_rw(struct super_block *sb, int remount)
{
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	int rc;

	if (remount) {
		if (chkSuper(sb) || (sbi->state != FM_CLEAN))
			return -EINVAL;

		truncate_inode_pages(sbi->ipimap->i_mapping, 0);
		truncate_inode_pages(sbi->ipbmap->i_mapping, 0);
		diUnmount(sbi->ipimap, 1);
		if ((rc = diMount(sbi->ipimap))) {
			jfs_err("jfs_mount_rw: diMount failed!");
			return rc;
		}

		dbUnmount(sbi->ipbmap, 1);
		if ((rc = dbMount(sbi->ipbmap))) {
			jfs_err("jfs_mount_rw: dbMount failed!");
			return rc;
		}
	}

	if ((rc = lmLogOpen(sb)))
		return rc;

	if ((rc = updateSuper(sb, FM_MOUNT))) {
		jfs_err("jfs_mount: updateSuper failed w/rc = %d", rc);
		lmLogClose(sb);
		return rc;
	}

	logMOUNT(sb);

	return rc;
}
开发者ID:ra0710,项目名称:PsycoKernel,代码行数:37,代码来源:jfs_mount.c


示例17: get_UCSname

/*
 * NAME:    get_UCSname()
 *
 * FUNCTION:    Allocate and translate to unicode string
 *
 */
int get_UCSname(struct component_name * uniName, struct dentry *dentry)
{
    struct nls_table *nls_tab = JFS_SBI(dentry->d_sb)->nls_tab;
    int length = dentry->d_name.len;

    if (length > JFS_NAME_MAX)
        return -ENAMETOOLONG;

    uniName->name =
        kmalloc((length + 1) * sizeof(wchar_t), GFP_NOFS);

    if (uniName->name == NULL)
        return -ENOMEM;

    uniName->namlen = jfs_strtoUCS(uniName->name, dentry->d_name.name,
                       length, nls_tab);

    if (uniName->namlen < 0) {
        kfree(uniName->name);
        return uniName->namlen;
    }

    return 0;
}
开发者ID:274914765,项目名称:C,代码行数:30,代码来源:jfs_unicode.c


示例18: jfs_mount

/*
 * NAME:	jfs_mount(sb)
 *
 * FUNCTION:	vfs_mount()
 *
 * PARAMETER:	sb	- super block
 *
 * RETURN:	-EBUSY	- device already mounted or open for write
 *		-EBUSY	- cvrdvp already mounted;
 *		-EBUSY	- mount table full
 *		-ENOTDIR- cvrdvp not directory on a device mount
 *		-ENXIO	- device open failure
 */
int jfs_mount(struct super_block *sb)
{
	int rc = 0;		/* Return code          */
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct inode *ipaimap = NULL;
	struct inode *ipaimap2 = NULL;
	struct inode *ipimap = NULL;
	struct inode *ipbmap = NULL;

	/*
	 * read/validate superblock 
	 * (initialize mount inode from the superblock)
	 */
	if ((rc = chkSuper(sb))) {
		goto errout20;
	}

	ipaimap = diReadSpecial(sb, AGGREGATE_I, 0);
	if (ipaimap == NULL) {
		jfs_err("jfs_mount: Faild to read AGGREGATE_I");
		rc = -EIO;
		goto errout20;
	}
	sbi->ipaimap = ipaimap;

	jfs_info("jfs_mount: ipaimap:0x%p", ipaimap);

	/*
	 * initialize aggregate inode allocation map
	 */
	if ((rc = diMount(ipaimap))) {
		jfs_err("jfs_mount: diMount(ipaimap) failed w/rc = %d", rc);
		goto errout21;
	}

	/*
	 * open aggregate block allocation map
	 */
	ipbmap = diReadSpecial(sb, BMAP_I, 0);
	if (ipbmap == NULL) {
		rc = -EIO;
		goto errout22;
	}

	jfs_info("jfs_mount: ipbmap:0x%p", ipbmap);

	sbi->ipbmap = ipbmap;

	/*
	 * initialize aggregate block allocation map
	 */
	if ((rc = dbMount(ipbmap))) {
		jfs_err("jfs_mount: dbMount failed w/rc = %d", rc);
		goto errout22;
	}

	/*
	 * open the secondary aggregate inode allocation map
	 *
	 * This is a duplicate of the aggregate inode allocation map.
	 *
	 * hand craft a vfs in the same fashion as we did to read ipaimap.
	 * By adding INOSPEREXT (32) to the inode number, we are telling
	 * diReadSpecial that we are reading from the secondary aggregate
	 * inode table.  This also creates a unique entry in the inode hash
	 * table.
	 */
	if ((sbi->mntflag & JFS_BAD_SAIT) == 0) {
		ipaimap2 = diReadSpecial(sb, AGGREGATE_I, 1);
		if (ipaimap2 == 0) {
			jfs_err("jfs_mount: Faild to read AGGREGATE_I");
			rc = -EIO;
			goto errout35;
		}
		sbi->ipaimap2 = ipaimap2;

		jfs_info("jfs_mount: ipaimap2:0x%p", ipaimap2);

		/*
		 * initialize secondary aggregate inode allocation map
		 */
		if ((rc = diMount(ipaimap2))) {
			jfs_err("jfs_mount: diMount(ipaimap2) failed, rc = %d",
				rc);
			goto errout35;
		}
	} else
//.........这里部分代码省略.........
开发者ID:OpenHMR,项目名称:Open-HMR600,代码行数:101,代码来源:jfs_mount.c


示例19: chkSuper

/*
 *	chkSuper()
 *
 * validate the superblock of the file system to be mounted and 
 * get the file system parameters.
 *
 * returns
 *	0 with fragsize set if check successful
 *	error code if not successful
 */
static int chkSuper(struct super_block *sb)
{
	int rc = 0;
	struct jfs_sb_info *sbi = JFS_SBI(sb);
	struct jfs_superblock *j_sb;
	struct buffer_head *bh;
	int AIM_bytesize, AIT_bytesize;
	int expected_AIM_bytesize, expected_AIT_bytesize;
	s64 AIM_byte_addr, AIT_byte_addr, fsckwsp_addr;
	s64 byte_addr_diff0, byte_addr_diff1;
	s32 bsize;

	if ((rc = readSuper(sb, &bh)))
		return rc;
	j_sb = (struct jfs_superblock *)bh->b_data;

	/*
	 * validate superblock
	 */
	/* validate fs signature */
	if (strncmp(j_sb->s_magic, JFS_MAGIC, 4) ||
	    le32_to_cpu(j_sb->s_version) > JFS_VERSION) {
		rc = -EINVAL;
		goto out;
	}

	bsize = le32_to_cpu(j_sb->s_bsize);
#ifdef _JFS_4K
	if (bsize != PSIZE) {
		jfs_err("Currently only 4K block size supported!");
		rc = -EINVAL;
		goto out;
	}
#endif				/* _JFS_4K */

	jfs_info("superblock: flag:0x%08x state:0x%08x size:0x%Lx",
		 le32_to_cpu(j_sb->s_flag), le32_to_cpu(j_sb->s_state),
		 (unsigned long long) le64_to_cpu(j_sb->s_size));

	/* validate the descriptors for Secondary AIM and AIT */
	if ((j_sb->s_flag & cpu_to_le32(JFS_BAD_SAIT)) !=
	    cpu_to_le32(JFS_BAD_SAIT)) {
		expected_AIM_bytesize = 2 * PSIZE;
		AIM_bytesize = lengthPXD(&(j_sb->s_aim2)) * bsize;
		expected_AIT_bytesize = 4 * PSIZE;
		AIT_bytesize = lengthPXD(&(j_sb->s_ait2)) * bsize;
		AIM_byte_addr = addressPXD(&(j_sb->s_aim2)) * bsize;
		AIT_byte_addr = addressPXD(&(j_sb->s_ait2)) * bsize;
		byte_addr_diff0 = AIT_byte_addr - AIM_byte_addr;
		fsckwsp_addr = addressPXD(&(j_sb->s_fsckpxd)) * bsize;
		byte_addr_diff1 = fsckwsp_addr - AIT_byte_addr;
		if ((AIM_bytesize != expected_AIM_bytesize) ||
		    (AIT_bytesize != expected_AIT_bytesize) ||
		    (byte_addr_diff0 != AIM_bytesize) ||
		    (byte_addr_diff1 <= AIT_bytesize))
			j_sb->s_flag |= cpu_to_le32(JFS_BAD_SAIT);
	}

	if ((j_sb->s_flag & cpu_to_le32(JFS_GROUPCOMMIT)) !=
	    cpu_to_le32(JFS_GROUPCOMMIT))
		j_sb->s_flag |= cpu_to_le32(JFS_GROUPCOMMIT);

	/* validate fs state */
	if (j_sb->s_state != cpu_to_le32(FM_CLEAN) &&
	    !(sb->s_flags & MS_RDONLY)) {
		jfs_err("jfs_mount: Mount Failure: File System Dirty.");
		rc = -EINVAL;
		goto out;
	}

	sbi->state = le32_to_cpu(j_sb->s_state);
	sbi->mntflag = le32_to_cpu(j_sb->s_flag);

	/*
	 * JFS always does I/O by 4K pages.  Don't tell the buffer cache
	 * that we use anything else (leave s_blocksize alone).
	 */
	sbi->bsize = bsize;
	sbi->l2bsize = le16_to_cpu(j_sb->s_l2bsize);

	/*
	 * For now, ignore s_pbsize, l2bfactor.  All I/O going through buffer
	 * cache.
	 */
	sbi->nbperpage = PSIZE >> sbi->l2bsize;
	sbi->l2nbperpage = L2PSIZE - sbi->l2bsize;
	sbi->l2niperblk = sbi->l2bsize - L2DISIZE;
	if (sbi->mntflag & JFS_INLINELOG)
		sbi->logpxd = j_sb->s_logpxd;
	else {
//.........这里部分代码省略.........
开发者ID:OpenHMR,项目名称:Open-HMR600,代码行数:101,代码来源:jfs_mount.c


示例20: jfs_symlink


//.........这里部分代码省略.........

    if (ssize <= IDATASIZE) {
        ip->i_op = &jfs_fast_symlink_inode_operations;

        i_fastsymlink = JFS_IP(ip)->i_inline;
        memcpy(i_fastsymlink, name, ssize);
        ip->i_size = ssize - 1;

        /*
         * if symlink is > 128 bytes, we don't have the space to
         * store inline extended attributes
         */
        if (ssize > sizeof (JFS_IP(ip)->i_inline))
            JFS_IP(ip)->mode2 &= ~INLINEEA;

        jfs_info("jfs_symlink: fast symlink added  ssize:%d name:%s ",
                 ssize, name);
    }
    /*
     * write source path name in a single extent
     */
    else {
        jfs_info("jfs_symlink: allocate extent ip:0x%p", ip);

        ip->i_op = &jfs_symlink_inode_operations;
        ip->i_mapping->a_ops = &jfs_aops;

        /*
         * even though the data of symlink object (source
         * path name) is treated as non-journaled user data,
         * it is read/written thru buffer cache for performance.
         */
        sb = ip->i_sb;
        bmask = JFS_SBI(sb)->bsize - 1;
        xsize = (ssize + bmask) & ~bmask;
        xaddr = 0;
        xlen = xsize >> JFS_SBI(sb)->l2bsize;
        if ((rc = xtInsert(tid, ip, 0, 0, xlen, &xaddr, 0))) {
            txAbort(tid, 0);
            goto out3;
        }
        extent = xaddr;
        ip->i_size = ssize - 1;
        while (ssize) {
            /* This is kind of silly since PATH_MAX == 4K */
            int copy_size = min(ssize, PSIZE);

            mp = get_metapage(ip, xaddr, PSIZE, 1);

            if (mp == NULL) {
                xtTruncate(tid, ip, 0, COMMIT_PWMAP);
                rc = -EIO;
                txAbort(tid, 0);
                goto out3;
            }
            memcpy(mp->data, name, copy_size);
            flush_metapage(mp);
            ssize -= copy_size;
            name += copy_size;
            xaddr += JFS_SBI(sb)->nbperpage;
        }
    }

    /*
     * create entry for symbolic link in parent directory
     */
开发者ID:Berrrry,项目名称:SPH-L710_NA_Kernel,代码行数:67,代码来源:namei.c



注:本文中的JFS_SBI函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ JFWRITE函数代码示例发布时间:2022-05-30
下一篇:
C++ JFS_IP函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap