C++ IsValidLayer函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IsValidLayer函数的典型用法代码示例。如果您正苦于以下问题：C++ IsValidLayer函数的具体用法？C++ IsValidLayer怎么用？C++ IsValidLayer使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IsValidLayer函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: AllocateLayer

//-----------------------------------------------------------------------------
// Purpose: 
// Output : int
//-----------------------------------------------------------------------------
int	CBaseAnimatingOverlay::AddLayeredSequence( int sequence, int iPriority )
{
	int i = AllocateLayer( iPriority );
	Assert( IsValidLayer( i ) );
	// No room?
	if ( IsValidLayer( i ) )
	{
		m_AnimOverlay[i].m_flCycle = 0;
		m_AnimOverlay[i].m_flPrevCycle = 0;
		m_AnimOverlay[i].m_flPlaybackRate = 1.0;
		m_AnimOverlay[i].m_nActivity = ACT_INVALID;
		m_AnimOverlay[i].m_nSequence = sequence;
		m_AnimOverlay[i].m_flWeight = 1.0f;
		m_AnimOverlay[i].m_flBlendIn = 0.0f;
		m_AnimOverlay[i].m_flBlendOut = 0.0f;
		m_AnimOverlay[i].m_bSequenceFinished = false;
		m_AnimOverlay[i].m_flLastEventCheck = 0;
		m_AnimOverlay[i].m_bLooping = ((GetSequenceFlags( GetModelPtr(), sequence ) & STUDIO_LOOPING) != 0);
		if (ai_sequence_debug.GetBool() == true && m_debugOverlays & OVERLAY_NPC_SELECTED_BIT)
		{
			Msg("%5.3f : adding %d (%d): %s : %5.3f (%.3f)\n", gpGlobals->curtime, i, m_AnimOverlay[ i ].m_nOrder.Get(), GetSequenceName( m_AnimOverlay[ i ].m_nSequence ), m_AnimOverlay[ i ].m_flCycle.Get(), m_AnimOverlay[ i ].m_flWeight.Get() );
		}
	}

	return i;
}

开发者ID:Bubbasacs，项目名称:FinalProj，代码行数:30，代码来源:baseanimatingoverlay.cpp

示例2: GetLayerWeight

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
float CBaseAnimatingOverlay::GetLayerWeight( int iLayer )
{
	if (!IsValidLayer( iLayer ))
		return 0.0;

	return m_AnimOverlay[iLayer].m_flWeight;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:10，代码来源:BaseAnimatingOverlay.cpp

示例3: SetLayerDuration

void CBaseAnimatingOverlay::SetLayerDuration( int iLayer, float flDuration )
{
	if (IsValidLayer( iLayer ) && flDuration > 0)
	{
		m_AnimOverlay[iLayer].m_flPlaybackRate = SequenceDuration( m_AnimOverlay[iLayer].m_nSequence ) / flDuration;
	}
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:7，代码来源:BaseAnimatingOverlay.cpp

示例4: SetLayerLooping

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerLooping( int iLayer, bool bLooping )
{
	if (!IsValidLayer( iLayer ))
		return;

	m_AnimOverlay[iLayer].m_bLooping = bLooping;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:10，代码来源:BaseAnimatingOverlay.cpp

示例5: SetLayerBlendOut

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerBlendOut( int iLayer, float flBlendOut )
{
	if (!IsValidLayer( iLayer ))
		return;

	m_AnimOverlay[iLayer].m_flBlendOut = flBlendOut;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:10，代码来源:BaseAnimatingOverlay.cpp

示例6: GetLayerCycle

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
float CBaseAnimatingOverlay::GetLayerCycle( int iLayer )
{
	if (!IsValidLayer( iLayer ))
		return 0.0;

	return m_AnimOverlay[iLayer].m_flCycle;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:10，代码来源:BaseAnimatingOverlay.cpp

示例7: GetLayerSequence

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
int CBaseAnimatingOverlay::GetLayerSequence( int iLayer )
{
	if (!IsValidLayer( iLayer ))
	{
		return ACT_INVALID;
	}
		
	return m_AnimOverlay[iLayer].m_nSequence;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:12，代码来源:BaseAnimatingOverlay.cpp

示例8: SetLayerWeight

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerWeight( int iLayer, float flWeight )
{
	if (!IsValidLayer( iLayer ))
		return;

	flWeight = clamp( flWeight, 0.0f, 1.0f );
	m_AnimOverlay[iLayer].m_flWeight = flWeight;
	m_AnimOverlay[iLayer].MarkActive( );
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:12，代码来源:BaseAnimatingOverlay.cpp

示例9: SetLayerPlaybackRate

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerPlaybackRate( int iLayer, float flPlaybackRate )
{
	if (!IsValidLayer( iLayer ))
		return;

	Assert( flPlaybackRate > -1.0 && flPlaybackRate < 40.0);

	m_AnimOverlay[iLayer].m_flPlaybackRate = flPlaybackRate;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:12，代码来源:BaseAnimatingOverlay.cpp

示例10: GetLayerActivity

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
Activity CBaseAnimatingOverlay::GetLayerActivity( int iLayer )
{
	if (!IsValidLayer( iLayer ))
	{
		return ACT_INVALID;
	}
		
	return m_AnimOverlay[iLayer].m_nActivity;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:12，代码来源:BaseAnimatingOverlay.cpp

示例11: wxFAIL_MSG

void LAYERS_MAP_DIALOG::OnSelectLayer( wxCommandEvent& event )
{
    int ii;

    ii = event.GetId() - ID_BUTTON_0;

    if( (ii < 0) || (ii >= GERBER_DRAWLAYERS_COUNT) )
    {
        wxFAIL_MSG( wxT("Bad layer id") );
        return;
    }

    LAYER_NUM jj = m_layersLookUpTable[m_buttonTable[ii]];

    if( jj != UNSELECTED_LAYER && !IsValidLayer( jj ) )
        jj = B_Cu;  // (Defaults to "Copper" layer.)

    jj = m_Parent->SelectPCBLayer( jj, m_exportBoardCopperLayersCount, true );

    if( jj != UNSELECTED_LAYER && !IsValidLayer( jj ) )
        return;

    if( jj != m_layersLookUpTable[m_buttonTable[ii]] )
    {
        m_layersLookUpTable[m_buttonTable[ii]] = jj;

        if( jj == UNSELECTED_LAYER )
        {
            m_layersList[ii]->SetLabel( _( "Do not export" ) );

            // Change the text color to blue (to highlight
            // that this layer is *not* being exported)
            m_layersList[ii]->SetForegroundColour( *wxBLUE );
        }
        else
        {
            m_layersList[ii]->SetLabel( GetPCBDefaultLayerName( jj ) );

            // Change the text color to fuchsia (to highlight
            // that this layer *is* being exported)
            m_layersList[ii]->SetForegroundColour( wxColour( 255, 0, 128 ) );
        }
    }
}

开发者ID:KiCad，项目名称:kicad-source-mirror，代码行数:44，代码来源:select_layers_to_pcb.cpp

示例12: SetLayerPriority

//-----------------------------------------------------------------------------
// Purpose: 
// Output : int
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerPriority( int iLayer, int iPriority )
{
	if (!IsValidLayer( iLayer ))
	{
		return;
	}

	if (m_AnimOverlay[iLayer].m_nPriority == iPriority)
	{
		return;
	}

	// look for an open slot and for existing layers that are lower priority
	int i;
	for (i = 0; i < m_AnimOverlay.Count(); i++)
	{
		if ( m_AnimOverlay[i].IsActive() )
		{
			if (m_AnimOverlay[i].m_nOrder > m_AnimOverlay[iLayer].m_nOrder)
			{
				m_AnimOverlay[i].m_nOrder--;
			}
		}
	}

	int iNewOrder = 0;
	for (i = 0; i < m_AnimOverlay.Count(); i++)
	{
		if ( i != iLayer && m_AnimOverlay[i].IsActive() )
		{
			if (m_AnimOverlay[i].m_nPriority <= iPriority)
			{
				iNewOrder = MAX( iNewOrder, m_AnimOverlay[i].m_nOrder + 1 );
			}
		}
	}

	for (i = 0; i < m_AnimOverlay.Count(); i++)
	{
		if ( i != iLayer && m_AnimOverlay[i].IsActive() )
		{
			if ( m_AnimOverlay[i].m_nOrder >= iNewOrder)
			{
				m_AnimOverlay[i].m_nOrder++;
			}
		}
	}

	m_AnimOverlay[iLayer].m_nOrder = iNewOrder;
	m_AnimOverlay[iLayer].m_nPriority = iPriority;
	m_AnimOverlay[iLayer].MarkActive( );

	VerifyOrder();

	return;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:60，代码来源:BaseAnimatingOverlay.cpp

示例13: AddLayeredSequence

//-----------------------------------------------------------------------------
// Purpose: 
// Output : int
//-----------------------------------------------------------------------------
int CBaseAnimatingOverlay::AddGestureSequence( int sequence, bool autokill /*= true*/ )
{
	int i = AddLayeredSequence( sequence, 0 );
	// No room?
	if ( IsValidLayer( i ) )
	{
		SetLayerAutokill( i, autokill );
	}

	return i;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:15，代码来源:BaseAnimatingOverlay.cpp

示例14: SetLayerCycle

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerCycle( int iLayer, float flCycle )
{
	if (!IsValidLayer( iLayer ))
		return;

	if (!m_AnimOverlay[iLayer].m_bLooping)
	{
		flCycle = clamp( flCycle, 0.0, 1.0 );
	}
	m_AnimOverlay[iLayer].m_flCycle = flCycle;
	m_AnimOverlay[iLayer].MarkActive( );
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:15，代码来源:BaseAnimatingOverlay.cpp

示例15: GetLayerDuration

float CBaseAnimatingOverlay::GetLayerDuration( int iLayer )
{
	if (IsValidLayer( iLayer ))
	{
		if (m_AnimOverlay[iLayer].m_flPlaybackRate != 0.0f)
		{
			return (1.0 - m_AnimOverlay[iLayer].m_flCycle) * SequenceDuration( m_AnimOverlay[iLayer].m_nSequence ) / m_AnimOverlay[iLayer].m_flPlaybackRate;
		}
		return SequenceDuration( m_AnimOverlay[iLayer].m_nSequence );
	}
	return 0.0;
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:12，代码来源:BaseAnimatingOverlay.cpp

示例16: SetLayerAutokill

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerAutokill( int iLayer, bool bAutokill )
{
	if (!IsValidLayer( iLayer ))
		return;

	if (bAutokill)
	{
		m_AnimOverlay[iLayer].m_fFlags |= ANIM_LAYER_AUTOKILL;
	}
	else
	{
		m_AnimOverlay[iLayer].m_fFlags &= ~ANIM_LAYER_AUTOKILL;
	}
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:17，代码来源:BaseAnimatingOverlay.cpp

示例17: SetLayerNoEvents

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerNoEvents( int iLayer, bool bNoEvents )
{
	if (!IsValidLayer( iLayer ))
		return;

	if (bNoEvents)
	{
		m_AnimOverlay[iLayer].m_fFlags |= ANIM_LAYER_NOEVENTS;
	}
	else
	{
		m_AnimOverlay[iLayer].m_fFlags &= ~ANIM_LAYER_NOEVENTS;
	}
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:17，代码来源:BaseAnimatingOverlay.cpp

示例18: SetLayerNoRestore

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerNoRestore( int iLayer, bool bNoRestore )
{
	if (!IsValidLayer( iLayer ))
		return;

	if (bNoRestore)
	{
		m_AnimOverlay[iLayer].m_fFlags |= ANIM_LAYER_DONTRESTORE;
	}
	else
	{
		m_AnimOverlay[iLayer].m_fFlags &= ~ANIM_LAYER_DONTRESTORE;
	}
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:17，代码来源:BaseAnimatingOverlay.cpp

示例19: SetLayerCycle

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CBaseAnimatingOverlay::SetLayerCycle( int iLayer, float flCycle, float flPrevCycle, float flLastEventCheck )
{
	if (!IsValidLayer( iLayer ))
		return;

	if (!m_AnimOverlay[iLayer].m_bLooping)
	{
		flCycle = clamp( flCycle, 0.0f, 1.0f );
		flPrevCycle = clamp( flPrevCycle, 0.0f, 1.0f );
	}
	m_AnimOverlay[iLayer].m_flCycle = flCycle;
	m_AnimOverlay[iLayer].m_flPrevCycle = flPrevCycle;
	m_AnimOverlay[iLayer].m_flLastEventCheck = flLastEventCheck;
	m_AnimOverlay[iLayer].MarkActive( );
}

开发者ID:Adidasman1，项目名称:source-sdk-2013，代码行数:18，代码来源:BaseAnimatingOverlay.cpp

示例20: FastRemoveLayer

void CBaseAnimatingOverlay::FastRemoveLayer( int iLayer )
{
	if (!IsValidLayer( iLayer ))
		return;

	// shift the other layers down in order
	for (int j = 0; j < m_AnimOverlay.Count(); j++ )
	{
		if ((m_AnimOverlay[ j ].IsActive()) && m_AnimOverlay[ j ].m_nOrder > m_AnimOverlay[ iLayer ].m_nOrder)
		{
			m_AnimOverlay[ j ].m_nOrder--;
		}
	}
	m_AnimOverlay[ iLayer ].Init( this );

	VerifyOrder();
}

开发者ID:Muini，项目名称:Nag-asw，代码行数:17，代码来源:BaseAnimatingOverlay.cpp

注：本文中的IsValidLayer函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。