• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ Invalidate函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中Invalidate函数的典型用法代码示例。如果您正苦于以下问题:C++ Invalidate函数的具体用法?C++ Invalidate怎么用?C++ Invalidate使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了Invalidate函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ToggleFullScreen


//.........这里部分代码省略.........
	int h;
	int bpp;
	unsigned char *pixels = NULL;
	SDL_Color *palette = NULL;
	int ncolors = 0;

	if (!TheScreen) { // don't bother if there's no surface.
		return;
	}

	flags = TheScreen->flags;
	w = TheScreen->w;
	h = TheScreen->h;
	bpp = TheScreen->format->BitsPerPixel;

	if (!SDL_VideoModeOK(w, h, bpp,	flags ^ SDL_FULLSCREEN)) {
		return;
	}

	SDL_GetClipRect(TheScreen, &clip);

	// save the contents of the screen.
	framesize = w * h * TheScreen->format->BytesPerPixel;

#if defined(USE_OPENGL) || defined(USE_GLES)
	if (!UseOpenGL)
#endif
	{
		if (!(pixels = new unsigned char[framesize])) { // out of memory
			return;
		}
		SDL_LockSurface(TheScreen);
		memcpy(pixels, TheScreen->pixels, framesize);

		if (TheScreen->format->palette) {
			ncolors = TheScreen->format->palette->ncolors;
			if (!(palette = new SDL_Color[ncolors])) {
				delete[] pixels;
				return;
			}
			memcpy(palette, TheScreen->format->palette->colors,
				   ncolors * sizeof(SDL_Color));
		}
		SDL_UnlockSurface(TheScreen);
	}

	TheScreen = SDL_SetVideoMode(w, h, bpp, flags ^ SDL_FULLSCREEN);
	if (!TheScreen) {
		TheScreen = SDL_SetVideoMode(w, h, bpp, flags);
		if (!TheScreen) { // completely screwed.
#if defined(USE_OPENGL) || defined(USE_GLES)
			if (!UseOpenGL)
#endif
			{
				delete[] pixels;
				delete[] palette;
			}
			fprintf(stderr, "Toggle to fullscreen, crashed all\n");
			Exit(-1);
		}
	}

#ifndef USE_TOUCHSCREEN
	// Cannot hide cursor on Windows with touchscreen, as it switches
	// to relative mouse coordinates in fullscreen. See above initial
	// call to ShowCursor
	//
	// Windows shows the SDL cursor when starting in fullscreen mode
	// then switching to window mode.  This hides the cursor again.
	SDL_ShowCursor(SDL_ENABLE);
	SDL_ShowCursor(SDL_DISABLE);
#endif

#if defined(USE_OPENGL) || defined(USE_GLES)
	if (UseOpenGL) {
		ReloadOpenGL();
	} else
#endif
	{
		SDL_LockSurface(TheScreen);
		memcpy(TheScreen->pixels, pixels, framesize);
		delete[] pixels;

		if (TheScreen->format->palette) {
			// !!! FIXME : No idea if that flags param is right.
			SDL_SetPalette(TheScreen, SDL_LOGPAL, palette, 0, ncolors);
			delete[] palette;
		}
		SDL_UnlockSurface(TheScreen);
	}

	SDL_SetClipRect(TheScreen, &clip);

	Invalidate(); // Update display
#else // !USE_WIN32
	SDL_WM_ToggleFullScreen(TheScreen);
#endif

	Video.FullScreen = (TheScreen->flags & SDL_FULLSCREEN) ? 1 : 0;
}
开发者ID:realhidden,项目名称:stratagus,代码行数:101,代码来源:sdl.cpp


示例2: check

void FSingleTileEditorViewportClient::SetTileIndex(int32 InTileIndex)
{
	const int32 OldTileIndex = TileBeingEditedIndex;
	const bool bNewIndexValid = (InTileIndex >= 0) && (InTileIndex < TileSet->GetTileCount());
	TileBeingEditedIndex = bNewIndexValid ? InTileIndex : INDEX_NONE;

	FSpriteGeometryEditMode* GeometryEditMode = ModeTools->GetActiveModeTyped<FSpriteGeometryEditMode>(FSpriteGeometryEditMode::EM_SpriteGeometry);
	check(GeometryEditMode);
	FSpriteGeometryCollection* GeomToEdit = nullptr;
	
	if (TileBeingEditedIndex != INDEX_NONE)
	{
		if (FPaperTileMetadata* Metadata = TileSet->GetMutableTileMetadata(InTileIndex))
		{
			GeomToEdit = &(Metadata->CollisionData);
		}
	}

	// Tell the geometry editor about the new tile (if it exists)
	GeometryEditMode->SetGeometryBeingEdited(GeomToEdit, /*bAllowCircles=*/ true, /*bAllowSubtractivePolygons=*/ false);

	// Update the visual representation
	UPaperSprite* DummySprite = nullptr;
	if (TileBeingEditedIndex != INDEX_NONE)
	{
		DummySprite = NewObject<UPaperSprite>();
 		DummySprite->SpriteCollisionDomain = ESpriteCollisionMode::None;
 		DummySprite->PivotMode = ESpritePivotMode::Center_Center;
 		DummySprite->CollisionGeometry.GeometryType = ESpritePolygonMode::SourceBoundingBox;
 		DummySprite->RenderGeometry.GeometryType = ESpritePolygonMode::SourceBoundingBox;

		FSpriteAssetInitParameters SpriteReinitParams;

		SpriteReinitParams.Texture = TileSet->GetTileSheetTexture();

		//@TODO: Should analyze the texture (*at a higher level, not per tile click!*) to pick the correct material
		FVector2D UV;
		TileSet->GetTileUV(TileBeingEditedIndex, /*out*/ UV);
		SpriteReinitParams.Offset = FIntPoint((int32)UV.X, (int32)(UV.Y));
		SpriteReinitParams.Dimension = TileSet->GetTileSize();
		SpriteReinitParams.SetPixelsPerUnrealUnit(1.0f);
		DummySprite->InitializeSprite(SpriteReinitParams);
	}
	PreviewTileSpriteComponent->SetSprite(DummySprite);

	// Update the default geometry bounds
	const FVector2D HalfTileSize(TileSet->GetTileSize().X * 0.5f, TileSet->GetTileSize().Y * 0.5f);
	FBox2D DesiredBounds(ForceInitToZero);
	DesiredBounds.Min = -HalfTileSize;
	DesiredBounds.Max = HalfTileSize;
	GeometryEditMode->SetNewGeometryPreferredBounds(DesiredBounds);

	// Zoom to fit when we start editing a tile and weren't before, but leave it alone if we just changed tiles, in case they zoomed in or out further
	if ((TileBeingEditedIndex != INDEX_NONE) && (OldTileIndex == INDEX_NONE))
	{
		RequestFocusOnSelection(/*bInstant=*/ true);
	}

	// Trigger a details panel customization rebuild
	OnSingleTileIndexChanged.Broadcast(TileBeingEditedIndex, OldTileIndex);

	// Redraw the viewport
	Invalidate();
}
开发者ID:PickUpSU,项目名称:UnrealEngine4,代码行数:64,代码来源:SingleTileEditorViewportClient.cpp


示例3: Invalidate

	void CDateTimeUI::SetTime(SYSTEMTIME* pst)
	{
		m_sysTime = *pst;
		Invalidate();
	}
开发者ID:wyrover,项目名称:IMClient,代码行数:5,代码来源:UIDateTime.cpp


示例4: wxASSERT

void Styler_SearchHL::Delete(unsigned int start_pos, unsigned int end_pos) {
	wxASSERT(0 <= start_pos && start_pos <= m_doc.GetLength());
	if (m_text.empty()) return;

	if (start_pos == end_pos) return;
	wxASSERT(end_pos > start_pos);

	// Check if we have deleted the entire document
	if (m_doc.GetLength() == 0) {
		Invalidate();
		return;
	}

	// Adjust start & end
	unsigned int length = end_pos - start_pos;
	if (m_search_start >= start_pos) {
		if (m_search_start > end_pos) m_search_start -= length;
		else m_search_start = start_pos;
	}
	if (m_search_end > start_pos) {
		if (m_search_end > end_pos) m_search_end -= length;
		else m_search_end = start_pos;
	}
	else return; // Change after search area, no need to re-search

	unsigned int search_start = m_search_start;

	if (!m_matches.empty()) {
		if (start_pos >= m_matches.back().end) {
			// Do a new search from end of last match
			DoSearch(search_start, m_search_end, true);
			return;
		}

		// Find matches touched by deletion and remove those. Update all following
		bool is_first = true;
		vector<interval>::iterator p = m_matches.begin();
		while (p != m_matches.end()) {
			if (p->end > start_pos) {
				// Remember first valid match before pos
				if (is_first) {
					if (p != m_matches.begin()) search_start = (p-1)->end;
					is_first = false;
				}

				if (p->start < end_pos) {
					// pos inside match. Delete and continue
					p = m_matches.erase(p);
					if (p != m_matches.end()) continue; // new iterator
					else break;
				}
				else {
					// Move match to correct position
					p->start -= length;
					p->end -= length;
				}
			}
			++p;
		}
	}

	// Do a new search starting from end of first match before pos
	DoSearch(search_start, m_search_end, false);
}
开发者ID:sapient,项目名称:e,代码行数:64,代码来源:styler_searchhl.cpp


示例5: Invalidate

void FSingleTileEditorViewportClient::MarkTransactionAsDirty()
{
	bManipulationDirtiedSomething = true;
	Invalidate();
}
开发者ID:PickUpSU,项目名称:UnrealEngine4,代码行数:5,代码来源:SingleTileEditorViewportClient.cpp


示例6: glGetIntegerv


//.........这里部分代码省略.........
        }

        m_pDepthTexture->m_Width = m_Width;
        m_pDepthTexture->m_Height = m_Height;
    }

    // create the texture
    if( m_pColorTexture && m_pColorTexture->m_TextureID != 0 )
    {
        glBindTexture( GL_TEXTURE_2D, m_pColorTexture->m_TextureID );
        //glTexImage2D( GL_TEXTURE_2D, 0, GL_RGB, m_TextureWidth, m_TextureHeight, 0, GL_RGB, GL_UNSIGNED_SHORT_5_6_5, NULL );
        glTexImage2D( GL_TEXTURE_2D, 0, GL_RGBA, m_TextureWidth, m_TextureHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, NULL );
        glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE );
        glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE );
        glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, m_MinFilter );
        glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, m_MagFilter );
        glBindTexture( GL_TEXTURE_2D, 0 );
        checkGlError( "glBindTexture" );
    }

    // create a depth renderbuffer.
    if( m_pDepthTexture && m_pDepthTexture->m_TextureID != 0 )
    {
#if !MYFW_OPENGLES2
        GLint depthformat = GL_DEPTH_COMPONENT32;
        if( m_DepthBits == 24 )
            depthformat = GL_DEPTH_COMPONENT24;
        else if( m_DepthBits == 16 )
            depthformat = GL_DEPTH_COMPONENT16;
#else
        GLint depthformat = GL_DEPTH_COMPONENT16;
#endif

        if( m_DepthIsTexture )
        {
            glBindTexture( GL_TEXTURE_2D, m_pDepthTexture->m_TextureID );
            checkGlError( "glBindTexture" );
            glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST );
            glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST );
            glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE );
            glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE );
            checkGlError( "glTexParameteri" );
            glTexImage2D( GL_TEXTURE_2D, 0, depthformat, m_TextureWidth, m_TextureHeight, 0,
                          GL_DEPTH_COMPONENT, GL_UNSIGNED_BYTE, 0 );
                          //GL_DEPTH_COMPONENT, GL_FLOAT, 0 );
            checkGlError( "glTexImage2D" );
            glBindTexture( GL_TEXTURE_2D, 0 );
            checkGlError( "glBindTexture" );
        }
        else
        {
            glBindRenderbuffer( GL_RENDERBUFFER, m_pDepthTexture->m_TextureID );
            glRenderbufferStorage( GL_RENDERBUFFER, depthformat, m_TextureWidth, m_TextureHeight );
            checkGlError( "glRenderbufferStorageEXT" );
        }
    }

    // attach everything to the FBO
    {
        MyBindFramebuffer( GL_FRAMEBUFFER, m_FrameBufferID, 0, 0 );

        // attach color texture
        if( m_pColorTexture && m_pColorTexture->m_TextureID != 0 )
            glFramebufferTexture2D( GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, m_pColorTexture->m_TextureID, 0 );

        // attach depth renderbuffer
        if( m_pDepthTexture && m_pDepthTexture->m_TextureID != 0 )
        {
            if( m_DepthIsTexture )
            {
                glFramebufferTexture2D( GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_TEXTURE_2D, m_pDepthTexture->m_TextureID, 0 );
            }
            else
            {
               glFramebufferRenderbuffer( GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_RENDERBUFFER, m_pDepthTexture->m_TextureID );
            }
        }

        MyBindFramebuffer( GL_FRAMEBUFFER, 0, 0, 0 );
        checkGlError( "glBindFramebufferEXT" );
    }

    // any problems?
    GLint status = glCheckFramebufferStatus( GL_FRAMEBUFFER );
    checkGlError( "glCheckFramebufferStatus" );
    if( status != GL_FRAMEBUFFER_COMPLETE )
    {
        LOGInfo( LOGTag, "CreateFBO - error\n" );
        //MyAssert( false );
        Invalidate( true );
        return false;
    }

    LOGInfo( LOGTag, "CreateFBO - complete (%d, %d)\n", m_TextureWidth, m_TextureHeight );
#else
    return false;
#endif

    return true;
}
开发者ID:jaccen,项目名称:MyFramework,代码行数:101,代码来源:FBODefinition.cpp


示例7: _nc_mouse_parse

static bool
_nc_mouse_parse(SCREEN *sp, int runcount)
/* parse a run of atomic mouse events into a gesture */
{
    MEVENT *eventp = sp->_mouse_eventp;
    MEVENT *next, *ep;
    MEVENT *first_valid = NULL;
    MEVENT *first_invalid = NULL;
    int n;
    int b;
    bool merge;
    bool endLoop;

    TR(MY_TRACE, ("_nc_mouse_parse(%d) called", runcount));

    /*
     * When we enter this routine, the event list next-free pointer
     * points just past a run of mouse events that we know were separated
     * in time by less than the critical click interval. The job of this
     * routine is to collapse this run into a single higher-level event
     * or gesture.
     *
     * We accomplish this in two passes.  The first pass merges press/release
     * pairs into click events.  The second merges runs of click events into
     * double or triple-click events.
     *
     * It's possible that the run may not resolve to a single event (for
     * example, if the user quadruple-clicks).  If so, leading events
     * in the run are ignored if user does not call getmouse in a loop (getting
     * them from newest to older).
     *
     * Note that this routine is independent of the format of the specific
     * format of the pointing-device's reports.  We can use it to parse
     * gestures on anything that reports press/release events on a per-
     * button basis, as long as the device-dependent mouse code puts stuff
     * on the queue in MEVENT format.
     */

    /*
     * Reset all events that were not set, in case the user sometimes calls
     * getmouse only once and other times until there are no more events in
     * queue.
     *
     * This also allows reaching the beginning of the run.
     */
    ep = eventp;
    for (n = runcount; n < EV_MAX; n++) {
	Invalidate(ep);
	ep = NEXT(ep);
    }

#ifdef TRACE
    if (USE_TRACEF(TRACE_IEVENT)) {
	_trace_slot(sp, "before mouse press/release merge:");
	_tracef("_nc_mouse_parse: run starts at %ld, ends at %ld, count %d",
		RunParams(sp, eventp, ep),
		runcount);
	_nc_unlock_global(tracef);
    }
#endif /* TRACE */

    /* first pass; merge press/release pairs */
    endLoop = FALSE;
    while (!endLoop) {
	next = NEXT(ep);
	if (next == eventp) {
	    /* Will end the loop, but compact before */
	    endLoop = TRUE;
	} else {

#define MASK_CHANGED(x) (!(ep->bstate & MASK_PRESS(x)) \
		      == !(next->bstate & MASK_RELEASE(x)))

	    if (ValidEvent(ep) && ValidEvent(next)
		&& ep->x == next->x && ep->y == next->y
		&& (ep->bstate & BUTTON_PRESSED)
		&& (!(next->bstate & BUTTON_PRESSED))) {
		bool changed = TRUE;

		for (b = 1; b <= MAX_BUTTONS; ++b) {
		    if (!MASK_CHANGED(b)) {
			changed = FALSE;
			break;
		    }
		}

		if (changed) {
		    merge = FALSE;
		    for (b = 1; b <= MAX_BUTTONS; ++b) {
			if ((sp->_mouse_mask & MASK_CLICK(b))
			    && (ep->bstate & MASK_PRESS(b))) {
			    next->bstate &= ~MASK_RELEASE(b);
			    next->bstate |= MASK_CLICK(b);
			    merge = TRUE;
			}
		    }
		    if (merge) {
			Invalidate(ep);
		    }
		}
//.........这里部分代码省略.........
开发者ID:infoburp,项目名称:ncurses,代码行数:101,代码来源:lib_mouse.c


示例8: Invalidate

void EventSheetEditor::OnMouseMove(UINT nFlags, CPoint point) 
{
	if(!m_pHeader)
		return;
	m_ObjectHeaderTooltip.ShowAt(point, *this);

	m_Mouse = point;
	m_pHeader->OnMouseMove(point);
	if(m_pHeader->m_isDrag)
		Invalidate();

	else
	{
		// Is is possible we might be dragging.
		if(!m_Drag.IsDragging && m_leftDown)
		{
			if(	( (point.x - m_Drag.StoredPos.x)*(point.x - m_Drag.StoredPos.x)
				+(point.y - m_Drag.StoredPos.y)*(point.y - m_Drag.StoredPos.y)) >  8)
			{
				switch (m_Drag.dragtype)
				{
					case EVENT:
					{
						SelectedEventVector  m_SelectedEvents;
						CreateEventSelectionVectorLimited(m_SelectedEvents,(*m_pEventList));
						CEditorDragEvents* Events = new CEditorDragEvents;

						Events->pEd = this;
						Events->m_pSelectedEvents = &m_SelectedEvents;

						DROPEFFECT de = DROPEFFECT_COPY;
						m_pDDMgr->PrepareDrop(DO_DRAGDROP,"Construct Events",Events,&de);				
					
						// wait till the drop is done...then....
						m_Drag.dragtype = -1;
						m_Drag.IsDragging = false;
						Invalidate();
					}
					break;

					case CONDITION:
					{
						SelectedConditionVector m_SelectedConditions;
						CreateConditionSelectionVector(m_SelectedConditions,(*m_pEventList));
						CEditorDragConditions* Conditions = new CEditorDragConditions;

						Conditions->pEd = this;
						Conditions->m_pSelectedConditions = &m_SelectedConditions;

						DROPEFFECT de = DROPEFFECT_COPY;
						m_pDDMgr->PrepareDrop(DO_DRAGDROP,"Construct Conditions",Conditions,&de);				
					
						// wait till the drop is done..then...
						m_Drag.dragtype = -1;
						m_Drag.IsDragging = false;
						Invalidate();
						m_SelectedConditions.clear();
					
					}
					break;

					case ACTION:
					{
						SelectedActionVector m_SelectedActions;
						CreateActionSelectionVector(m_SelectedActions,(*m_pEventList));
						CEditorDragActions* Actions = new CEditorDragActions;
						
						Actions->pEd = this;
						Actions->m_pSelectedActions = &m_SelectedActions;

						DROPEFFECT de = DROPEFFECT_COPY;
						m_pDDMgr->PrepareDrop(DO_DRAGDROP,"Construct Actions",Actions,&de);				
					
						// wait till the drop is done..then...
						m_Drag.dragtype = -1;
						m_Drag.IsDragging = false;
						Invalidate();
						m_SelectedActions.clear();
					}
					break;	

					case OBJECT:
					{
						CEditorDragObject* Objects = new CEditorDragObject;
						Objects->pEd = (EventSheetEditor*)this;
						Objects->ObjectIdentifier = m_pHeader->GetObjectAtX(m_Drag.StoredPos.x)->oid;

						DROPEFFECT de = DROPEFFECT_COPY;
						m_pDDMgr->PrepareDrop(DO_DRAGDROP,"Construct Object",Objects,&de);				
					
						// wait till the drop is done..then...
						m_Drag.dragtype = -1;
						m_Drag.IsDragging = false;
						Invalidate();
					}
					break;	

					default:
					break;
				}
//.........这里部分代码省略.........
开发者ID:aolko,项目名称:construct,代码行数:101,代码来源:Event+Sheet+Editor+-+Mouse+&+Keyboard.cpp


示例9: Invalidate

 /*****************************************************************************
 * Function - Update
 * DESCRIPTION: Check if pointer pSubject is one of the subjects observed.
 * If it is then put the pointer in queue and request task time for sub task.
 *
 *****************************************************************************/
 void InputFunctionState::Update(Subject* pSubject)
 {
   Invalidate();
 }
开发者ID:Strongc,项目名称:DC_source,代码行数:10,代码来源:InputFunctionState.cpp


示例10: Invalidate

//绘画背景
BOOL CPlazaViewItem::OnEraseBkgnd(CDC * pDC)
{
	Invalidate(FALSE);
	UpdateWindow();
	return TRUE;
}
开发者ID:firehot,项目名称:WH2008,代码行数:7,代码来源:PlazaViewItem.cpp


示例11: EventAt

void EventSheetEditor::OnLButtonDown(UINT nFlags, CPoint pt) 
{
	if (!(pt.x >= m_pHeader->m_Split - 2 && pt.x <= m_pHeader->m_Split + 5))
	{
		CEditorEvent* pEvent = EventAt(pt);
		if(pEvent)
		{
			if(pEvent->canAddActions())
			{
				if(pEvent->mouseOverNewAction)
				{
					AddAction(pEvent, -1);
					return;
				}
				if(pEvent->mouseOverFooter)
				{
					AddCondition(false, NULL, true, pEvent);
					return;
				}		
			}
		}
	}

	if(KillFocusOnInlineEditor())
		return;
	m_ActionTooltip.Hide();

	CEditorEvent* pMyEventParent = NULL;
	CEditorEvent* pMyEvent = EventAt(pt, &pMyEventParent);
	m_leftDown = true;
	
	//if(m_pHeader->m_rect.PtInRect(pt))
	if(pt.x >= m_pHeader->m_Split - 2 && pt.x <= m_pHeader->m_Split + 5)
	{
		m_InsertAfter.Hide();
		m_InsertBefore.Hide();
		m_InsertSub.Hide();
		m_ActionTooltip.Hide();
		m_pHeader->OnLeftClick(pt);
		if(m_pHeader->m_isDrag)
		{
			SetCapture();
		}
		else // basically just if we arn't doing something interesting in the header...
		{
			if(!m_CtrlDown)
			{
				DeselectEvents();
				DeselectActions();
				DeselectConditions();
			}
		}



		for(int a = 0; a < m_pHeader->m_Objects.size(); a ++ )
		{
			if(m_pHeader->m_Objects.at(a).m_rect.PtInRect(pt))
			{
				m_Drag.dragtype = OBJECT;
				m_Drag.StoredPos = pt;
				m_Drag.CtrlDown = false;
			}
		}
	}
	else if(pMyEvent)
	{
		if(pMyEvent->PtInOnOffButton(pt, this))
		{
			// The user is clicked the + button
			pMyEvent->m_open(this) = pMyEvent->m_open(this) ? false:true;
			Invalidate();
			
		}

		else
		{
			///////////////
			// Select Condition
			
			CEditorCondition* pMyCondition = pMyEvent->conditionAt(pt, this);
			if(pMyCondition)
			{
				// find index
				int index = 0;
				for(int a = 0; a < pMyEvent->m_Conditions.size() ; a ++ )
					if(pMyEvent->m_Conditions[a] == pMyCondition)
						index = a;

				//Deselect selected events or actions
				DeselectEvents();
				DeselectActions();
				

				// Now the conditions
	
				if(pMyCondition->m_select(this)) // if we clicked on something already selected...wait till release
					m_ClickedSelectedCondition = true;
				else
				{
//.........这里部分代码省略.........
开发者ID:aolko,项目名称:construct,代码行数:101,代码来源:Event+Sheet+Editor+-+Mouse+&+Keyboard.cpp


示例12: Invalidate

void CSkinSliderCtrl::StartLoopArrow()
{
	m_bLoopArrow = TRUE;
	Invalidate();
}
开发者ID:dreamsxin,项目名称:EasyClient,代码行数:5,代码来源:SkinSliderCtrl.cpp


示例13: Invalidate

void CHoverButton::OnMouseHover(WPARAM wparam, LPARAM lparam) 
{
	// TODO: Add your message handler code here and/or call default
	m_bHover=TRUE;
	Invalidate();
}
开发者ID:sosoayaen,项目名称:DescentBoardGameTools,代码行数:6,代码来源:HoverButton.cpp


示例14: Invalidate

void CWndImage::SetBackgroundBrush(CBrush & brush)
{
  m_backBrush = (HBRUSH) brush.m_hObject;
  Invalidate();
}
开发者ID:malpharo,项目名称:AiPI,代码行数:5,代码来源:WndImage.cpp


示例15: ReplaceItemData

// Sets the image to use in a list box item
//
// Parameters:
//		[IN]	nIndex
//				Specifies the zero-based index of the item.
//		[IN]	nImage
//				Specifies the zero-based index of the image
//				inside the imagelist to use.
//		[IN]	bRepaint
//				If TRUE the control will be repainted.
//
void CListBoxST::SetImage(int nIndex, int nImage, BOOL bRepaint)
{
  ReplaceItemData(nIndex, 0, NULL, nImage, 0, MASK_NIMAGE);
  
  if (bRepaint)	Invalidate();
} // End of SetImage
开发者ID:chengpenghui,项目名称:UGame,代码行数:17,代码来源:ListBoxST.cpp


示例16: Invalidate

void CMyHeaderCtrl::OnLButtonUp(UINT nFlags, CPoint point)
{
	m_bLButtonDown = false;
	Invalidate();
	__super::OnLButtonUp(nFlags, point);
}
开发者ID:2Dou,项目名称:PlayBox,代码行数:6,代码来源:MyHeaderCtrl.cpp


示例17: Invalidate

FBODefinition::~FBODefinition()
{
    this->Remove();

    Invalidate( true );
}
开发者ID:jaccen,项目名称:MyFramework,代码行数:6,代码来源:FBODefinition.cpp


示例18: SetDistance

 void SetDistance(double _distance) {
   distance = _distance;
   Invalidate();
 }
开发者ID:ahsparrow,项目名称:xcsoar,代码行数:4,代码来源:FlarmTrafficWindow.hpp


示例19: SetActiveView

// *** KStowell
void CCTabCtrlBar::OnTabSelChange(NMHDR* pNMHDR, LRESULT* pResult)
{
	SetActiveView(m_tabctrl.GetCurSel());
	Invalidate();
}
开发者ID:philipgreat,项目名称:cplusplus-windows-test-apps,代码行数:6,代码来源:CCTabctrlBar.cpp


示例20: WXUNUSED

void Styler_SearchHL::ApplyDiff(const vector<cxChange>& WXUNUSED(changes)) {
	Invalidate();
}
开发者ID:sapient,项目名称:e,代码行数:3,代码来源:styler_searchhl.cpp



注:本文中的Invalidate函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ InvalidateCache函数代码示例发布时间:2022-05-30
下一篇:
C++ Invalid_Argument函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap