• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ InfoNES_SetupChr函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中InfoNES_SetupChr函数的典型用法代码示例。如果您正苦于以下问题:C++ InfoNES_SetupChr函数的具体用法?C++ InfoNES_SetupChr怎么用?C++ InfoNES_SetupChr使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了InfoNES_SetupChr函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Map99_Apu

/*-------------------------------------------------------------------*/
void Map99_Apu( WORD wAddr, BYTE byData )
{
    if( wAddr == 0x4016 ) {
        if( byData & 0x04 ) {
            PPUBANK[ 0 ] = VROMPAGE(  8 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 1 ] = VROMPAGE(  9 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 2 ] = VROMPAGE( 10 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 3 ] = VROMPAGE( 11 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 4 ] = VROMPAGE( 12 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 5 ] = VROMPAGE( 13 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 6 ] = VROMPAGE( 14 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 7 ] = VROMPAGE( 15 % ( NesHeader.byVRomSize << 3 ) );
            InfoNES_SetupChr();
        } else {
            PPUBANK[ 0 ] = VROMPAGE( 0 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 1 ] = VROMPAGE( 1 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 2 ] = VROMPAGE( 2 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 3 ] = VROMPAGE( 3 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 4 ] = VROMPAGE( 4 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 5 ] = VROMPAGE( 5 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 6 ] = VROMPAGE( 6 % ( NesHeader.byVRomSize << 3 ) );
            PPUBANK[ 7 ] = VROMPAGE( 7 % ( NesHeader.byVRomSize << 3 ) );
            InfoNES_SetupChr();
        }
    }

    if( wAddr == 0x4020 ) {
        Map99_Coin = byData;
    }
}
开发者ID:nothingzz,项目名称:iphonenes,代码行数:31,代码来源:InfoNES_Mapper_099.cpp


示例2: Map47_Set_PPU_Banks

/*-------------------------------------------------------------------*/
void Map47_Set_PPU_Banks()
{
  if ( NesHeader.byVRomSize > 0 )
  {
    if ( Map47_Chr_Swap() )
    { 
      PPUBANK[ 0 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr4 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 1 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr5 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 2 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr6 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 3 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr7 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 4 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr01 + 0 ) ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 5 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr01 + 1 ) ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 6 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr23 + 0 ) ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 7 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr23 + 1 ) ) % ( NesHeader.byVRomSize << 3 ) );
      InfoNES_SetupChr();
    } else {
      PPUBANK[ 0 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr01 + 0 ) ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 1 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr01 + 1 ) ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 2 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr23 + 0 ) ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 3 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + ( Map47_Chr23 + 1 ) ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 4 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr4 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 5 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr5 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 6 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr6 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 7 ] = VROMPAGE( ( ( Map47_Rom_Bank << 7 ) + Map47_Chr7 ) % ( NesHeader.byVRomSize << 3 ) );
      InfoNES_SetupChr();
    }
  }
}
开发者ID:nejidev,项目名称:arm-NES-linux-,代码行数:29,代码来源:InfoNES_Mapper_047.cpp


示例3: Map115_Set_PPU_Banks

/*-------------------------------------------------------------------*/
void Map115_Set_PPU_Banks()
{
  if ( NesHeader.byVRomSize > 0 ) {
    if( Map115_Reg[0] & 0x80 ) {
      PPUBANK[ 0 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr4) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 1 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr5) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 2 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr6) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 3 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr7) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 4 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr0) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 5 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr1) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 6 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr2) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 7 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr3) % (NesHeader.byVRomSize<<3));
      InfoNES_SetupChr();
    } else {
      PPUBANK[ 0 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr0) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 1 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr1) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 2 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr2) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 3 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr3) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 4 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr4) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 5 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr5) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 6 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr6) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 7 ] = VROMPAGE( ((Map115_ExChrSwitch<<8)+Map115_Chr7) % (NesHeader.byVRomSize<<3));
      InfoNES_SetupChr();
    }
  }
}
开发者ID:Tonyfield,项目名称:Nester,代码行数:27,代码来源:InfoNES_Mapper_115.c


示例4: Map193_Sram

/*-------------------------------------------------------------------*/
void Map193_Sram( WORD wAddr, BYTE byData )
{
  switch( wAddr ) {
  case	0x6000:
    PPUBANK[ 0 ] = VROMPAGE( ((byData&0xfc) + 0 ) % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 1 ] = VROMPAGE( ((byData&0xfc) + 1 ) % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 2 ] = VROMPAGE( ((byData&0xfc) + 2 ) % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 3 ] = VROMPAGE( ((byData&0xfc) + 3 ) % ( NesHeader.byVRomSize << 3 ) );
    InfoNES_SetupChr();
    break;
  case	0x6001:
    PPUBANK[ 4 ] = VROMPAGE( ( byData + 0 ) % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 5 ] = VROMPAGE( ( byData + 1 ) % ( NesHeader.byVRomSize << 3 ) );
    InfoNES_SetupChr();
    break;
  case	0x6002:
    PPUBANK[ 6 ] = VROMPAGE( ( byData + 0 ) % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 7 ] = VROMPAGE( ( byData + 1 ) % ( NesHeader.byVRomSize << 3 ) );
    InfoNES_SetupChr();
    break;
  case	0x6003:
    ROMBANK0 = ROMPAGE( ((byData<<2) + 0 ) % ( NesHeader.byRomSize << 1 ) );
    ROMBANK1 = ROMPAGE( ((byData<<2) + 1 ) % ( NesHeader.byRomSize << 1 ) );
    ROMBANK2 = ROMPAGE( ((byData<<2) + 2 ) % ( NesHeader.byRomSize << 1 ) );
    ROMBANK3 = ROMPAGE( ((byData<<2) + 3 ) % ( NesHeader.byRomSize << 1 ) );
    break;
  }
}
开发者ID:Tonyfield,项目名称:Nester,代码行数:29,代码来源:InfoNES_Mapper_193.c


示例5: Map114_Set_PPU_Banks

/*-------------------------------------------------------------------*/
void Map114_Set_PPU_Banks()
{
  if ( NesHeader.byVRomSize > 0 )
  {
    if ( Map114_Chr_Swap() )
    { 
      PPUBANK[ 0 ] = VROMPAGE( Map114_Chr4 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 1 ] = VROMPAGE( Map114_Chr5 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 2 ] = VROMPAGE( Map114_Chr6 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 3 ] = VROMPAGE( Map114_Chr7 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 4 ] = VROMPAGE( ( Map114_Chr01 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 5 ] = VROMPAGE( ( Map114_Chr01 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 6 ] = VROMPAGE( ( Map114_Chr23 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 7 ] = VROMPAGE( ( Map114_Chr23 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      InfoNES_SetupChr();
    } else {
      PPUBANK[ 0 ] = VROMPAGE( ( Map114_Chr01 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 1 ] = VROMPAGE( ( Map114_Chr01 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 2 ] = VROMPAGE( ( Map114_Chr23 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 3 ] = VROMPAGE( ( Map114_Chr23 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 4 ] = VROMPAGE( Map114_Chr4 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 5 ] = VROMPAGE( Map114_Chr5 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 6 ] = VROMPAGE( Map114_Chr6 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 7 ] = VROMPAGE( Map114_Chr7 % ( NesHeader.byVRomSize << 3 ) );
      InfoNES_SetupChr();
    }
  }
}
开发者ID:304471720,项目名称:GridOS,代码行数:29,代码来源:InfoNES_Mapper_114.cpp


示例6: Map185_Write

/*-------------------------------------------------------------------*/
void Map185_Write( WORD wAddr, BYTE byData )
{
    /* Set PPU Banks */
    if ( byData & 0x03 )
    {
        PPUBANK[ 0 ] = VROMPAGE( 0 );
        PPUBANK[ 1 ] = VROMPAGE( 1 );
        PPUBANK[ 2 ] = VROMPAGE( 2 );
        PPUBANK[ 3 ] = VROMPAGE( 3 );
        PPUBANK[ 4 ] = VROMPAGE( 4 );
        PPUBANK[ 5 ] = VROMPAGE( 5 );
        PPUBANK[ 6 ] = VROMPAGE( 6 );
        PPUBANK[ 7 ] = VROMPAGE( 7 );
        InfoNES_SetupChr();
    } else {
        PPUBANK[ 0 ] = Map185_Dummy_Chr_Rom;
        PPUBANK[ 1 ] = Map185_Dummy_Chr_Rom;
        PPUBANK[ 2 ] = Map185_Dummy_Chr_Rom;
        PPUBANK[ 3 ] = Map185_Dummy_Chr_Rom;
        PPUBANK[ 4 ] = Map185_Dummy_Chr_Rom;
        PPUBANK[ 5 ] = Map185_Dummy_Chr_Rom;
        PPUBANK[ 6 ] = Map185_Dummy_Chr_Rom;
        PPUBANK[ 7 ] = Map185_Dummy_Chr_Rom;
        InfoNES_SetupChr();
    }
}
开发者ID:Tonyfield,项目名称:Nester,代码行数:27,代码来源:InfoNES_Mapper_185.c


示例7: Map249_Write

/*-------------------------------------------------------------------*/
void Map249_Write( WORD wAddr, BYTE byData )
{
  BYTE	byM0,byM1,byM2,byM3,byM4,byM5,byM6,byM7;

  switch( wAddr&0xFF01 ) {
  case	  0x8000:
  case    0x8800:
    Map249_Reg[0] = byData;
    break;
  case	  0x8001:
  case    0x8801:
    switch( Map249_Reg[0] & 0x07 ) {
    case	0x00:
      if( Map249_Spdata == 1 ) {
	byM0=byData&0x1;
	byM1=(byData&0x02)>>1;
	byM2=(byData&0x04)>>2;
	byM3=(byData&0x08)>>3;
	byM4=(byData&0x10)>>4;
	byM5=(byData&0x20)>>5;
	byM6=(byData&0x40)>>6;
	byM7=(byData&0x80)>>7;
	byData=(byM5<<7)|(byM4<<6)|(byM2<<5)|(byM6<<4)|(byM7<<3)|(byM3<<2)|(byM1<<1)|byM0;
      }
      PPUBANK[ 0 ] = VROMPAGE((byData&0xFE) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 1 ] = VROMPAGE((byData|0x01) % (NesHeader.byVRomSize<<3));
      InfoNES_SetupChr();
      break;
    case	0x01:
      if( Map249_Spdata == 1 ) {
	byM0=byData&0x1;
	byM1=(byData&0x02)>>1;
	byM2=(byData&0x04)>>2;
	byM3=(byData&0x08)>>3;
	byM4=(byData&0x10)>>4;
	byM5=(byData&0x20)>>5;
	byM6=(byData&0x40)>>6;
	byM7=(byData&0x80)>>7;
	byData=(byM5<<7)|(byM4<<6)|(byM2<<5)|(byM6<<4)|(byM7<<3)|(byM3<<2)|(byM1<<1)|byM0;
      }
      PPUBANK[ 2 ] = VROMPAGE((byData&0xFE) % (NesHeader.byVRomSize<<3));
      PPUBANK[ 3 ] = VROMPAGE((byData|0x01) % (NesHeader.byVRomSize<<3));
      InfoNES_SetupChr();
      break;
    case	0x02:
      if( Map249_Spdata == 1 ) {
	byM0=byData&0x1;
	byM1=(byData&0x02)>>1;
	byM2=(byData&0x04)>>2;
	byM3=(byData&0x08)>>3;
	byM4=(byData&0x10)>>4;
	byM5=(byData&0x20)>>5;
	byM6=(byData&0x40)>>6;
	byM7=(byData&0x80)>>7;
	byData=(byM5<<7)|(byM4<<6)|(byM2<<5)|(byM6<<4)|(byM7<<3)|(byM3<<2)|(byM1<<1)|byM0;
      }
开发者ID:Hiroyuki-Nagata,项目名称:mona,代码行数:57,代码来源:InfoNES_Mapper_249.c


示例8: Map10_PPU

/*-------------------------------------------------------------------*/
void Map10_PPU( WORD wAddr )
{
  /* Control Latch Selector */ 
  switch ( wAddr & 0x3ff0 )
  {
    case 0x0fd0:
      /* Latch Control */
      latch3.state = 0xfd;
      /* Set PPU Banks */
      PPUBANK[ 0 ] = VROMPAGE( latch3.lo_bank );
      PPUBANK[ 1 ] = VROMPAGE( latch3.lo_bank + 1 );
      PPUBANK[ 2 ] = VROMPAGE( latch3.lo_bank + 2 );
      PPUBANK[ 3 ] = VROMPAGE( latch3.lo_bank + 3 );     
      InfoNES_SetupChr();
      break;

    case 0x0fe0:
      /* Latch Control */
      latch3.state = 0xfe;
      /* Set PPU Banks */
      PPUBANK[ 0 ] = VROMPAGE( latch3.hi_bank );
      PPUBANK[ 1 ] = VROMPAGE( latch3.hi_bank + 1 );
      PPUBANK[ 2 ] = VROMPAGE( latch3.hi_bank + 2 );
      PPUBANK[ 3 ] = VROMPAGE( latch3.hi_bank + 3 );     
      InfoNES_SetupChr();      
      break;

    case 0x1fd0:
      /* Latch Control */
      latch4.state = 0xfd;
      /* Set PPU Banks */
      PPUBANK[ 4 ] = VROMPAGE( latch4.lo_bank );
      PPUBANK[ 5 ] = VROMPAGE( latch4.lo_bank + 1 );
      PPUBANK[ 6 ] = VROMPAGE( latch4.lo_bank + 2 );
      PPUBANK[ 7 ] = VROMPAGE( latch4.lo_bank + 3 );     
      InfoNES_SetupChr();
      break;      

    case 0x1fe0:
      /* Latch Control */
      latch4.state = 0xfe;
      /* Set PPU Banks */
      PPUBANK[ 4 ] = VROMPAGE( latch4.hi_bank );
      PPUBANK[ 5 ] = VROMPAGE( latch4.hi_bank + 1 );
      PPUBANK[ 6 ] = VROMPAGE( latch4.hi_bank + 2 );
      PPUBANK[ 7 ] = VROMPAGE( latch4.hi_bank + 3 );     
      InfoNES_SetupChr();            
      break;
  }
}
开发者ID:304471720,项目名称:GridOS,代码行数:51,代码来源:InfoNES_Mapper_010.cpp


示例9: Map251_Set_Banks

/*-------------------------------------------------------------------*/
void Map251_Set_Banks()
{
  int	nChr[6];
  int	nPrg[4];

  int i ;
for (i = 0; i < 6; i++ ) {
    nChr[i] = (Map251_Reg[i]|(Map251_Breg[1]<<4)) & ((Map251_Breg[2]<<4)|0x0F);
  }

  if( Map251_Reg[8] & 0x80 ) {
    PPUBANK[ 0 ] = VROMPAGE(nChr[2] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 1 ] = VROMPAGE(nChr[3] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 2 ] = VROMPAGE(nChr[4] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 3 ] = VROMPAGE(nChr[5] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 4 ] = VROMPAGE(nChr[0] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 5 ] = VROMPAGE((nChr[0]+1) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 6 ] = VROMPAGE(nChr[1] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 7 ] = VROMPAGE((nChr[1]+1) % (NesHeader.byVRomSize<<3));
    InfoNES_SetupChr();
  } else {
    PPUBANK[ 0 ] = VROMPAGE(nChr[0] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 1 ] = VROMPAGE((nChr[0]+1) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 2 ] = VROMPAGE(nChr[1] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 3 ] = VROMPAGE((nChr[1]+1) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 4 ] = VROMPAGE(nChr[2] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 5 ] = VROMPAGE(nChr[3] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 6 ] = VROMPAGE(nChr[4] % (NesHeader.byVRomSize<<3));
    PPUBANK[ 7 ] = VROMPAGE(nChr[5] % (NesHeader.byVRomSize<<3));
    InfoNES_SetupChr();
  }

  nPrg[0] = (Map251_Reg[6]&((Map251_Breg[3]&0x3F)^0x3F))|(Map251_Breg[1]);
  nPrg[1] = (Map251_Reg[7]&((Map251_Breg[3]&0x3F)^0x3F))|(Map251_Breg[1]);
  nPrg[2] = nPrg[3] =((Map251_Breg[3]&0x3F)^0x3F)|(Map251_Breg[1]);
  nPrg[2] &= (NesHeader.byRomSize<<1)-1;

  if( Map251_Reg[8] & 0x40 ) {
    ROMBANK0 = ROMPAGE(nPrg[2] % (NesHeader.byRomSize<<1));
    ROMBANK1 = ROMPAGE(nPrg[1] % (NesHeader.byRomSize<<1));
    ROMBANK2 = ROMPAGE(nPrg[0] % (NesHeader.byRomSize<<1));
    ROMBANK3 = ROMPAGE(nPrg[3] % (NesHeader.byRomSize<<1));
  } else { 
    ROMBANK0 = ROMPAGE(nPrg[0] % (NesHeader.byRomSize<<1));
    ROMBANK1 = ROMPAGE(nPrg[1] % (NesHeader.byRomSize<<1));
    ROMBANK2 = ROMPAGE(nPrg[2] % (NesHeader.byRomSize<<1));
    ROMBANK3 = ROMPAGE(nPrg[3] % (NesHeader.byRomSize<<1));
  }
}
开发者ID:nothingzz,项目名称:iphonenes,代码行数:50,代码来源:InfoNES_Mapper_251.cpp


示例10: SetBank_PPU

/*-------------------------------------------------------------------*/
void SetBank_PPU()
{
  if( NesHeader.byVRomSize > 0 ) {
    if( Map245_Reg[0] & 0x80 ) {
      PPUBANK[ 0 ] = VROMPAGE( Map245_Chr4 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 1 ] = VROMPAGE( Map245_Chr5 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 2 ] = VROMPAGE( Map245_Chr6 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 3 ] = VROMPAGE( Map245_Chr7 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 4 ] = VROMPAGE( ( Map245_Chr01 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 5 ] = VROMPAGE( ( Map245_Chr01 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 6 ] = VROMPAGE( ( Map245_Chr23 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 7 ] = VROMPAGE( ( Map245_Chr23 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      InfoNES_SetupChr();
    } else {
      PPUBANK[ 0 ] = VROMPAGE( ( Map245_Chr01 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 1 ] = VROMPAGE( ( Map245_Chr01 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 2 ] = VROMPAGE( ( Map245_Chr23 + 0 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 3 ] = VROMPAGE( ( Map245_Chr23 + 1 ) % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 4 ] = VROMPAGE( Map245_Chr4 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 5 ] = VROMPAGE( Map245_Chr5 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 6 ] = VROMPAGE( Map245_Chr6 % ( NesHeader.byVRomSize << 3 ) );
      PPUBANK[ 7 ] = VROMPAGE( Map245_Chr7 % ( NesHeader.byVRomSize << 3 ) );
      InfoNES_SetupChr();
    }
  } else {
    if( Map245_Reg[0] & 0x80 ) {
      PPUBANK[ 4 ] = CRAMPAGE( (Map245_Chr01+0)&0x07 );
      PPUBANK[ 5 ] = CRAMPAGE( (Map245_Chr01+1)&0x07 );
      PPUBANK[ 6 ] = CRAMPAGE( (Map245_Chr23+0)&0x07 );
      PPUBANK[ 7 ] = CRAMPAGE( (Map245_Chr23+1)&0x07 );
      PPUBANK[ 0 ] = CRAMPAGE( Map245_Chr4&0x07 );
      PPUBANK[ 1 ] = CRAMPAGE( Map245_Chr5&0x07 );
      PPUBANK[ 2 ] = CRAMPAGE( Map245_Chr6&0x07 );
      PPUBANK[ 3 ] = CRAMPAGE( Map245_Chr7&0x07 );
      InfoNES_SetupChr();
    } else {
      PPUBANK[ 0 ] = CRAMPAGE( (Map245_Chr01+0)&0x07 );
      PPUBANK[ 1 ] = CRAMPAGE( (Map245_Chr01+1)&0x07 );
      PPUBANK[ 2 ] = CRAMPAGE( (Map245_Chr23+0)&0x07 );
      PPUBANK[ 3 ] = CRAMPAGE( (Map245_Chr23+1)&0x07 );
      PPUBANK[ 4 ] = CRAMPAGE( Map245_Chr4&0x07 );
      PPUBANK[ 5 ] = CRAMPAGE( Map245_Chr5&0x07 );
      PPUBANK[ 6 ] = CRAMPAGE( Map245_Chr6&0x07 );
      PPUBANK[ 7 ] = CRAMPAGE( Map245_Chr7&0x07 );
      InfoNES_SetupChr();
    }
  }
}
开发者ID:nothingzz,项目名称:iphonenes,代码行数:49,代码来源:InfoNES_Mapper_245.cpp


示例11: Map72_Write

/*-------------------------------------------------------------------*/
void Map72_Write( WORD wAddr, BYTE byData )
{
  BYTE byBank = byData & 0x0f;

  if ( byData & 0x80 )
  {
    /* Set ROM Banks */
    byBank <<= 1;
    byBank %= ( NesHeader.byRomSize << 1 );
    ROMBANK0 = ROMPAGE( byBank );
    ROMBANK1 = ROMPAGE( byBank + 1 );
  } else 
  if ( byData & 0x40 )
  {
    /* Set PPU Banks */
    byBank <<= 3;
    byBank %= ( NesHeader.byVRomSize << 3 );
    PPUBANK[ 0 ] = VROMPAGE( byBank );
    PPUBANK[ 1 ] = VROMPAGE( byBank + 1 );
    PPUBANK[ 2 ] = VROMPAGE( byBank + 2 );
    PPUBANK[ 3 ] = VROMPAGE( byBank + 3 );
    PPUBANK[ 4 ] = VROMPAGE( byBank + 4 );
    PPUBANK[ 5 ] = VROMPAGE( byBank + 5 );
    PPUBANK[ 6 ] = VROMPAGE( byBank + 6 );
    PPUBANK[ 7 ] = VROMPAGE( byBank + 7 );
    InfoNES_SetupChr();
  }
}
开发者ID:Tonyfield,项目名称:Nester,代码行数:29,代码来源:InfoNES_Mapper_072.c


示例12: Map62_Write

/*-------------------------------------------------------------------*/
void Map62_Write( WORD wAddr, BYTE byData )
{
  switch( wAddr & 0xFF00 ) {
  case	0x8100:
    ROMBANK0 = ROMPAGE((byData+0) % (NesHeader.byRomSize<<1));
    ROMBANK1 = ROMPAGE((byData+1) % (NesHeader.byRomSize<<1));
    break;
  case	0x8500:
    ROMBANK0 = ROMPAGE(byData % (NesHeader.byRomSize<<1));
    break;
  case	0x8700:
    ROMBANK1 = ROMPAGE(byData % (NesHeader.byRomSize<<1));
    break;

  default:
    PPUBANK[ 0 ] = VROMPAGE((byData+0) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 1 ] = VROMPAGE((byData+1) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 2 ] = VROMPAGE((byData+2) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 3 ] = VROMPAGE((byData+3) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 4 ] = VROMPAGE((byData+4) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 5 ] = VROMPAGE((byData+5) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 6 ] = VROMPAGE((byData+6) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 7 ] = VROMPAGE((byData+7) % (NesHeader.byVRomSize<<3));
    InfoNES_SetupChr();
    break;
  }
}
开发者ID:nothingzz,项目名称:iphonenes,代码行数:28,代码来源:InfoNES_Mapper_062.cpp


示例13: Map70_Write

/*-------------------------------------------------------------------*/
void Map70_Write( WORD wAddr, BYTE byData )
{
  BYTE byChrBank = byData & 0x0f;
  BYTE byPrgBank = ( byData & 0x70 ) >> 4;

  /* Set ROM Banks */
  byPrgBank <<= 1;
  byPrgBank %= ( NesHeader.byRomSize << 1 );

  ROMBANK0 = ROMPAGE( byPrgBank );
  ROMBANK1 = ROMPAGE( byPrgBank + 1 );

  /* Set PPU Banks */
  byChrBank <<= 3;
  byChrBank %= ( NesHeader.byVRomSize << 3 );

  PPUBANK[ 0 ] = VROMPAGE( byChrBank + 0 );
  PPUBANK[ 1 ] = VROMPAGE( byChrBank + 1 );
  PPUBANK[ 2 ] = VROMPAGE( byChrBank + 2 );
  PPUBANK[ 3 ] = VROMPAGE( byChrBank + 3 );
  PPUBANK[ 4 ] = VROMPAGE( byChrBank + 4 );
  PPUBANK[ 5 ] = VROMPAGE( byChrBank + 5 );
  PPUBANK[ 6 ] = VROMPAGE( byChrBank + 6 );
  PPUBANK[ 7 ] = VROMPAGE( byChrBank + 7 );
  InfoNES_SetupChr();

  /* Name Table Mirroring */
  if ( byData & 0x80 )
  {
    InfoNES_Mirroring( 2 );
  } else {
    InfoNES_Mirroring( 3 );
  }
}
开发者ID:Tonyfield,项目名称:Nester,代码行数:35,代码来源:InfoNES_Mapper_070.c


示例14: Map202_WriteSub

/*-------------------------------------------------------------------*/
void Map202_WriteSub( WORD wAddr, BYTE byData )
{
	int bank = (wAddr>>1) & 0x07;

	/* Set ROM Banks */
	ROMBANK0 = ROMPAGE(((bank<<1)+0) % (NesHeader.byRomSize<<1));
	ROMBANK1 = ROMPAGE(((bank<<1)+1) % (NesHeader.byRomSize<<1));

	if ((wAddr&0x0c) == 0x0c) {
		ROMBANK2 = ROMPAGE((((bank+1)<<1)+0) % (NesHeader.byRomSize<<1));
		ROMBANK3 = ROMPAGE((((bank+1)<<1)+1) % (NesHeader.byRomSize<<1));
	} else {		
		ROMBANK2 = ROMPAGE((((bank+0)<<1)+0) % (NesHeader.byRomSize<<1));
		ROMBANK3 = ROMPAGE((((bank+0)<<1)+1) % (NesHeader.byRomSize<<1));
	}	

	/* Set PPU Banks */
	PPUBANK[0] = VROMPAGE(((bank<<3)+0) % (NesHeader.byVRomSize<<3));
	PPUBANK[1] = VROMPAGE(((bank<<3)+1) % (NesHeader.byVRomSize<<3));
	PPUBANK[2] = VROMPAGE(((bank<<3)+2) % (NesHeader.byVRomSize<<3));
	PPUBANK[3] = VROMPAGE(((bank<<3)+3) % (NesHeader.byVRomSize<<3));
	PPUBANK[4] = VROMPAGE(((bank<<3)+4) % (NesHeader.byVRomSize<<3));
	PPUBANK[5] = VROMPAGE(((bank<<3)+5) % (NesHeader.byVRomSize<<3));
	PPUBANK[6] = VROMPAGE(((bank<<3)+6) % (NesHeader.byVRomSize<<3));
	PPUBANK[7] = VROMPAGE(((bank<<3)+7) % (NesHeader.byVRomSize<<3));
	InfoNES_SetupChr();

	if ( wAddr & 0x01 ) {
		InfoNES_Mirroring( 0 );
	} else {
		InfoNES_Mirroring( 1 );
	}
}
开发者ID:nejidev,项目名称:arm-NES-linux-,代码行数:34,代码来源:InfoNES_Mapper_202.cpp


示例15: Map10_Init

/*-------------------------------------------------------------------*/
void Map10_Init()
{
  int nPage;

  /* Initialize Mapper */
  MapperInit = Map10_Init;

  /* Write to Mapper */
  MapperWrite = Map10_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map0_HSync;

  /* Callback at PPU */
  MapperPPU = Map10_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( NesHeader.byVRomSize > 0 )
  {
    for ( nPage = 0; nPage < 8; ++nPage )
      PPUBANK[ nPage ] = VROMPAGE( nPage );
    InfoNES_SetupChr();
  }

  /* Init Latch Selector */
  latch3.state = 0xfe;
  latch3.lo_bank = 0;
  latch3.hi_bank = 0;
  latch4.state = 0xfe;
  latch4.lo_bank = 0;
  latch4.hi_bank = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 );
}
开发者ID:304471720,项目名称:GridOS,代码行数:60,代码来源:InfoNES_Mapper_010.cpp


示例16: Map252_Init

/*-------------------------------------------------------------------*/
void Map252_Init()
{
  /* Initialize Mapper */
  MapperInit = Map252_Init;

  /* Write to Mapper */
  MapperWrite = Map252_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map252_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set Registers */
  for( int i = 0; i < 9; i++ ) {
    Map252_Reg[i] = i;
  }

  Map252_IRQ_Enable = 0;
  Map252_IRQ_Counter = 0;
  Map252_IRQ_Latch = 0;
  Map252_IRQ_Clock = 0;
  Map252_IRQ_Occur = 0;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( NesHeader.byVRomSize > 0 ) {
    for ( int nPage = 0; nPage < 8; ++nPage )
      PPUBANK[ nPage ] = VROMPAGE( nPage );
    InfoNES_SetupChr();
  }

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}
开发者ID:304471720,项目名称:GridOS,代码行数:60,代码来源:InfoNES_Mapper_252.cpp


示例17: Map45_Set_PPU_Banks

/*-------------------------------------------------------------------*/
void Map45_Set_PPU_Banks()
{
	BYTE table[16] =
	    {
	        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	        0x01,0x03,0x07,0x0F,0x1F,0x3F,0x7F,0xFF
	    };
	Map45_C[0] = Map45_Chr0;
	Map45_C[1] = Map45_Chr1;
	Map45_C[2] = Map45_Chr2;
	Map45_C[3] = Map45_Chr3;
	Map45_C[4] = Map45_Chr4;
	Map45_C[5] = Map45_Chr5;
	Map45_C[6] = Map45_Chr6;
	Map45_C[7] = Map45_Chr7;
	for(BYTE i = 0; i < 8; i++)
	{
		Map45_C[i] &= table[Map45_Regs[2] & 0x0F];
		Map45_C[i] |= Map45_Regs[0] & 0xff;
		Map45_C[i] += (BYTE)(Map45_Regs[2] & 0x10) << 4;
	}
	if(Map45_Regs[6] & 0x80)
	{
    PPUBANK[ 0 ] = VROMPAGE( Map45_C[4] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 1 ] = VROMPAGE( Map45_C[5] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 2 ] = VROMPAGE( Map45_C[6] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 3 ] = VROMPAGE( Map45_C[7] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 4 ] = VROMPAGE( Map45_C[0] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 5 ] = VROMPAGE( Map45_C[1] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 6 ] = VROMPAGE( Map45_C[2] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 7 ] = VROMPAGE( Map45_C[3] % ( NesHeader.byVRomSize << 3 ) );
    InfoNES_SetupChr();
	}
	else
	{
    PPUBANK[ 0 ] = VROMPAGE( Map45_C[0] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 1 ] = VROMPAGE( Map45_C[1] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 2 ] = VROMPAGE( Map45_C[2] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 3 ] = VROMPAGE( Map45_C[3] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 4 ] = VROMPAGE( Map45_C[4] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 5 ] = VROMPAGE( Map45_C[5] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 6 ] = VROMPAGE( Map45_C[6] % ( NesHeader.byVRomSize << 3 ) );
    PPUBANK[ 7 ] = VROMPAGE( Map45_C[7] % ( NesHeader.byVRomSize << 3 ) );
    InfoNES_SetupChr();
	}
}
开发者ID:willhope,项目名称:NES-game-simulated-on-TQ2440,代码行数:47,代码来源:InfoNES_Mapper_045.cpp


示例18: Map255_Init

/*-------------------------------------------------------------------*/
void Map255_Init()
{
  int nPage;

  /* Initialize Mapper */
  MapperInit = Map255_Init;

  /* Write to Mapper */
  MapperWrite = Map255_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map255_Apu;

  /* Read from APU */
  MapperReadApu = Map255_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map0_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMPAGE( 2 );
  ROMBANK3 = ROMPAGE( 3 );

  /* Set PPU Banks */
  if ( NesHeader.byVRomSize > 0 ) {
    for ( nPage = 0; nPage < 8; ++nPage )
      PPUBANK[ nPage ] = VROMPAGE( nPage );
    InfoNES_SetupChr();
  }

  /* Set Registers */
  InfoNES_Mirroring( 1 );

  Map255_Reg[0] = 0;
  Map255_Reg[1] = 0;
  Map255_Reg[2] = 0;
  Map255_Reg[3] = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}
开发者ID:Tonyfield,项目名称:Nester,代码行数:59,代码来源:InfoNES_Mapper_255.c


示例19: Map67_Init

/*-------------------------------------------------------------------*/
void Map67_Init()
{
  /* Initialize Mapper */
  MapperInit = Map67_Init;

  /* Write to Mapper */
  MapperWrite = Map67_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map67_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  PPUBANK[ 0 ] = VROMPAGE( 0 );
  PPUBANK[ 1 ] = VROMPAGE( 1 );
  PPUBANK[ 2 ] = VROMPAGE( 2 );
  PPUBANK[ 3 ] = VROMPAGE( 3 );
  PPUBANK[ 4 ] = VROMPAGE( ( NesHeader.byVRomSize << 3 ) - 4 );
  PPUBANK[ 5 ] = VROMPAGE( ( NesHeader.byVRomSize << 3 ) - 3 );
  PPUBANK[ 6 ] = VROMPAGE( ( NesHeader.byVRomSize << 3 ) - 2 );
  PPUBANK[ 7 ] = VROMPAGE( ( NesHeader.byVRomSize << 3 ) - 1 );
  InfoNES_SetupChr();

  /* Initialize IRQ Registers */
  Map67_IRQ_Enable = 0;
  Map67_IRQ_Cnt = 0;
  Map67_IRQ_Latch = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}
开发者ID:Hiroyuki-Nagata,项目名称:mona,代码行数:58,代码来源:InfoNES_Mapper_067.c


示例20: Map229_Write

/*-------------------------------------------------------------------*/
void Map229_Write( WORD wAddr, BYTE byData )
{
  if( wAddr & 0x001E ) {
    BYTE byPrg = wAddr&0x001F;

    ROMBANK0 = ROMPAGE(((byPrg<<1)+0) % (NesHeader.byRomSize<<1));
    ROMBANK1 = ROMPAGE(((byPrg<<1)+1) % (NesHeader.byRomSize<<1));
    ROMBANK2 = ROMPAGE(((byPrg<<1)+0) % (NesHeader.byRomSize<<1));
    ROMBANK3 = ROMPAGE(((byPrg<<1)+1) % (NesHeader.byRomSize<<1));

    BYTE byChr = wAddr & 0x0FFF;

    PPUBANK[ 0 ] = VROMPAGE(((byChr<<3) + 0) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 1 ] = VROMPAGE(((byChr<<3) + 1) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 2 ] = VROMPAGE(((byChr<<3) + 2) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 3 ] = VROMPAGE(((byChr<<3) + 3) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 4 ] = VROMPAGE(((byChr<<3) + 4) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 5 ] = VROMPAGE(((byChr<<3) + 5) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 6 ] = VROMPAGE(((byChr<<3) + 6) % (NesHeader.byVRomSize<<3));
    PPUBANK[ 7 ] = VROMPAGE(((byChr<<3) + 7) % (NesHeader.byVRomSize<<3));
    InfoNES_SetupChr();
  } else {
    ROMBANK0 = ROMPAGE( 0 );
    ROMBANK1 = ROMPAGE( 1 );
    ROMBANK2 = ROMPAGE( 2 );
    ROMBANK3 = ROMPAGE( 3 );

    PPUBANK[ 0 ] = VROMPAGE( 0 );
    PPUBANK[ 1 ] = VROMPAGE( 1 );
    PPUBANK[ 2 ] = VROMPAGE( 2 );
    PPUBANK[ 3 ] = VROMPAGE( 3 );
    PPUBANK[ 4 ] = VROMPAGE( 4 );
    PPUBANK[ 5 ] = VROMPAGE( 5 );
    PPUBANK[ 6 ] = VROMPAGE( 6 );
    PPUBANK[ 7 ] = VROMPAGE( 7 );
    InfoNES_SetupChr();
  }

  if( wAddr & 0x0020 ) {
    InfoNES_Mirroring( 0 );
  } else {
    InfoNES_Mirroring( 1 );
  }
}
开发者ID:nothingzz,项目名称:iphonenes,代码行数:45,代码来源:InfoNES_Mapper_229.cpp



注:本文中的InfoNES_SetupChr函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ Info_Print函数代码示例发布时间:2022-05-30
下一篇:
C++ Info函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap