C++ IT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IT函数的典型用法代码示例。如果您正苦于以下问题：C++ IT函数的具体用法？C++ IT怎么用？C++ IT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: pppoutsolstat

/* output solution status for PPP --------------------------------------------*/
extern void pppoutsolstat(rtk_t *rtk, int level, FILE *fp)
{
    ssat_t *ssat;
    double tow,pos[3],vel[3],acc[3];
    int i,j,week,nfreq=1;
    char id[32];
    
    if (level<=0||!fp) return;
    
    trace(3,"pppoutsolstat:\n");
    
    tow=time2gpst(rtk->sol.time,&week);
    
    /* receiver position */
    fprintf(fp,"$POS,%d,%.3f,%d,%.4f,%.4f,%.4f,%.4f,%.4f,%.4f\n",week,tow,
            rtk->sol.stat,rtk->x[0],rtk->x[1],rtk->x[2],0.0,0.0,0.0);
    
    /* receiver velocity and acceleration */
    if (rtk->opt.dynamics) {
        ecef2pos(rtk->sol.rr,pos);
        ecef2enu(pos,rtk->x+3,vel);
        ecef2enu(pos,rtk->x+6,acc);
        fprintf(fp,"$VELACC,%d,%.3f,%d,%.4f,%.4f,%.4f,%.5f,%.5f,%.5f,%.4f,%.4f,%.4f,%.5f,%.5f,%.5f\n",
                week,tow,rtk->sol.stat,vel[0],vel[1],vel[2],acc[0],acc[1],acc[2],
                0.0,0.0,0.0,0.0,0.0,0.0);
    }
    /* receiver clocks */
    i=IC(0,&rtk->opt);
    fprintf(fp,"$CLK,%d,%.3f,%d,%d,%.3f,%.3f,%.3f,%.3f\n",
            week,tow,rtk->sol.stat,1,rtk->x[i]*1E9/CLIGHT,rtk->x[i+1]*1E9/CLIGHT,
            0.0,0.0);
    
    /* tropospheric parameters */
    if (rtk->opt.tropopt==TROPOPT_EST||rtk->opt.tropopt==TROPOPT_ESTG) {
        i=IT(&rtk->opt);
        fprintf(fp,"$TROP,%d,%.3f,%d,%d,%.4f,%.4f\n",week,tow,rtk->sol.stat,
                1,rtk->x[i],0.0);
    }
    if (rtk->opt.tropopt==TROPOPT_ESTG) {
        i=IT(&rtk->opt);
        fprintf(fp,"$TRPG,%d,%.3f,%d,%d,%.5f,%.5f,%.5f,%.5f\n",week,tow,
                rtk->sol.stat,1,rtk->x[i+1],rtk->x[i+2],0.0,0.0);
    }
    if (rtk->sol.stat==SOLQ_NONE||level<=1) return;
    
    /* residuals and status */
    for (i=0;i<MAXSAT;i++) {
        ssat=rtk->ssat+i;
        if (!ssat->vs) continue;
        satno2id(i+1,id);
        for (j=0;j<nfreq;j++) {
            fprintf(fp,"$SAT,%d,%.3f,%s,%d,%.1f,%.1f,%.4f,%.4f,%d,%.0f,%d,%d,%d,%d,%d,%d\n",
                    week,tow,id,j+1,ssat->azel[0]*R2D,ssat->azel[1]*R2D,
                    ssat->resp[j],ssat->resc[j],ssat->vsat[j],ssat->snr[j]*0.25,
                    ssat->fix[j],ssat->slip[j]&3,ssat->lock[j],ssat->outc[j],
                    ssat->slipc[j],ssat->rejc[j]);
        }
    }
}

开发者ID:cyborg-x1，项目名称:rtk_debug，代码行数:60，代码来源:ppp.c

示例2: test_connect_properly_formatted

int test_connect_properly_formatted() {
    IT("sends a properly formatted connect packet and succeeds");
    ShimClient shimClient;

    shimClient.setAllowConnect(true);
    byte expectServer[] = { 172, 16, 0, 2 };
    shimClient.expectConnect(expectServer,1883);
    byte connect[] = {0x10,0x18,0x0,0x4,0x4d,0x51,0x54,0x54,0x4,0x2,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };

    shimClient.expect(connect,26);
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int state = client.state();
    IS_TRUE(state == MQTT_DISCONNECTED);

    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    state = client.state();
    IS_TRUE(state == MQTT_CONNECTED);

    END_IT
}

开发者ID:NikolasE，项目名称:pubsubclient，代码行数:26，代码来源:connect_spec.cpp

示例3: test_receive_max_sized_message

int test_receive_max_sized_message() {
    IT("receives an max-sized message");
    reset_callback();
    
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    
    byte length = MQTT_MAX_PACKET_SIZE;
    byte publish[] = {0x30,length-2,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    byte bigPublish[length];
    memset(bigPublish,'A',length);
    bigPublish[length] = 'B';
    memcpy(bigPublish,publish,16);
    shimClient.respond(bigPublish,length);
    
    rc = client.loop();
    
    IS_TRUE(rc);
    
    IS_TRUE(callback_called);
    IS_TRUE(strcmp(lastTopic,"topic")==0);
    IS_TRUE(lastLength == length-9);
    IS_TRUE(memcmp(lastPayload,bigPublish+9,lastLength)==0);
    
    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:4refr0nt，项目名称:ESPEasy-full-source，代码行数:35，代码来源:receive_spec.cpp

示例4: test_keepalive_pings_idle

int test_keepalive_pings_idle() {
    IT("keeps an idle connection alive (takes 1 minute)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte pingreq[] = { 0xC0,0x0 };
    shimClient.expect(pingreq,2);
    byte pingresp[] = { 0xD0,0x0 };
    shimClient.respond(pingresp,2);

    for (int i = 0; i < 50; i++) {
        sleep(1);
        if ( i == 15 || i == 31 || i == 47) {
            shimClient.expect(pingreq,2);
            shimClient.respond(pingresp,2);
        }
        rc = client.loop();
        IS_TRUE(rc);
    }

    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:1125384055，项目名称:libraries，代码行数:32，代码来源:keepalive_spec.cpp

示例5: test_receive_qos1

int test_receive_qos1() {
    IT("receives a qos1 message");
    reset_callback();
    
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    
    byte publish[] = {0x32,0x10,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x12,0x34,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    shimClient.respond(publish,18);
    
    byte puback[] = {0x40,0x2,0x12,0x34};
    shimClient.expect(puback,4);
    
    rc = client.loop();
    
    IS_TRUE(rc);
    
    IS_TRUE(callback_called);
    IS_TRUE(strcmp(lastTopic,"topic")==0);
    IS_TRUE(memcmp(lastPayload,"payload",7)==0);
    IS_TRUE(lastLength == 7);
    
    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:4refr0nt，项目名称:ESPEasy-full-source，代码行数:33，代码来源:receive_spec.cpp

示例6: test_keepalive_no_pings_inbound_qos1

int test_keepalive_no_pings_inbound_qos1() {
    IT("does not send pings for connections with inbound qos1 (takes 1 minute)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte publish[] = {0x32,0x10,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x12,0x34,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    byte puback[] = {0x40,0x2,0x12,0x34};

    for (int i = 0; i < 50; i++) {
        shimClient.respond(publish,18);
        shimClient.expect(puback,4);
        sleep(1);
        rc = client.loop();
        IS_TRUE(rc);
        IS_FALSE(shimClient.error());
    }

    END_IT
}

开发者ID:1125384055，项目名称:libraries，代码行数:27，代码来源:keepalive_spec.cpp

示例7: udtrop_ppp

/* temporal update of tropospheric parameters --------------------------------*/
static void udtrop_ppp(rtk_t *rtk)
{
    double pos[3],azel[]={0.0,PI/2.0},ztd,var;
    int i=IT(&rtk->opt),j;
    
    trace(3,"udtrop_ppp:\n");
    
    if (rtk->x[i]==0.0) {
        ecef2pos(rtk->sol.rr,pos);
        ztd=sbstropcorr(rtk->sol.time,pos,azel,&var);
        initx(rtk,ztd,var,i);
        
        if (rtk->opt.tropopt>=TROPOPT_ESTG) {
            for (j=0;j<2;j++) initx(rtk,1E-6,VAR_GRA,++i);
        }
    }
    else {
        rtk->P[i*(1+rtk->nx)]+=SQR(rtk->opt.prn[2])*fabs(rtk->tt);
        
        if (rtk->opt.tropopt>=TROPOPT_ESTG) {
            for (j=0;j<2;j++) {
                rtk->P[++i*(1+rtk->nx)]+=SQR(rtk->opt.prn[2]*0.1)*fabs(rtk->tt);
            }
        }
    }
}

开发者ID:AlfaroP，项目名称:isr-uc-ros-pkg，代码行数:27，代码来源:ppp.c

示例8: main

int main( int argc, /* number of arguments */ char *argv[] /* arguments */){
    int j,k;
	unsigned int p;

	myuint *X=rng_alloc();
    //myuint X[N+1];

	fprintf(stderr,"Welcome to the Yerevan random number generator!\nThe curent matrix size is %u\n"
		   "(the actual matrix is not kept in memory in this new efficient implementation)",N);
    fprintf(stderr,"\nWe will now generate a power of our matrix A^m\n "); 
    fprintf(stderr,"\nHow many iterations m do you want?\n(2^10=1024, 2^20=1048576, 2^30=1073741824)\nEnter m: "); scanf("%u", &p);

		printf("\nHere is convenient Mathematica Input:\n AT={");
		for (k=1; (k<=N); k++) {
			seedvector(X,k);
			for (j=0; (j<p); j++) {
				IT(X);
			}
			printf("\n{");
			printf("%llu", X[1] );
			for (j=2; (j<=N); j++) {
				printf(",\t%llu", X[j] );
			}
			printf("},");
		}
		printf("\b} \n A = Transpose[AT] \n d = Det[A] \n AM = Mod[A, 2^61-1] \n cp = CharacteristicPolynomial[AM, x] \n "
			   "N[Solve[cp == 0, x]] \n N[Eigenvalues[AM]] \n Abs[%%]\n"
				"M1K = Mod[MatrixPower[A, 2^10], 2^61 - 1]\n "); 
		//\n Maxima input: eq:charpoly(N,x);\n p:radcan(eq); r:allroots(p);
	printf("\n\nok\n");
	rng_free(X);
	return 1;
}

开发者ID:hep-mirrors，项目名称:h1fitter，代码行数:33，代码来源:driver_verification.c

示例9: test_keepalive_disconnects_hung

int test_keepalive_disconnects_hung() {
    IT("disconnects a hung connection (takes 30 seconds)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte pingreq[] = { 0xC0,0x0 };
    shimClient.expect(pingreq,2);

    for (int i = 0; i < 32; i++) {
        sleep(1);
        rc = client.loop();
    }
    IS_FALSE(rc);

    int state = client.state();
    IS_TRUE(state == MQTT_CONNECTION_TIMEOUT);

    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:1125384055，项目名称:libraries，代码行数:29，代码来源:keepalive_spec.cpp

示例10: test_publish_retained

int test_publish_retained() {
    IT("publishes retained");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte payload[] = { 0x01,0x02,0x03,0x0,0x05 };
    int length = 5;

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte publish[] = {0x31,0xc,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x1,0x2,0x3,0x0,0x5};
    shimClient.expect(publish,14);

    rc = client.publish((char*)"topic",payload,length,true);
    IS_TRUE(rc);

    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:schidler，项目名称:pubsubclient，代码行数:25，代码来源:publish_spec.cpp

示例11: test_receive_stream

int test_receive_stream() {
    IT("receives a streamed callback message");
    reset_callback();
    
    Stream stream;
    stream.expect((uint8_t*)"payload",7);
    
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient, stream);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    
    byte publish[] = {0x30,0xe,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    shimClient.respond(publish,16);
    
    rc = client.loop();

    IS_TRUE(rc);
    
    IS_TRUE(callback_called);
    IS_TRUE(strcmp(lastTopic,"topic")==0);
    IS_TRUE(lastLength == 7);
    
    IS_FALSE(stream.error());
    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:4refr0nt，项目名称:ESPEasy-full-source，代码行数:33，代码来源:receive_spec.cpp

示例12: test_keepalive_pings_with_inbound_qos0

int test_keepalive_pings_with_inbound_qos0() {
    IT("keeps a connection alive that only receives qos0 (takes 1 minute)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte publish[] = {0x30,0xe,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};

    for (int i = 0; i < 50; i++) {
        TRACE(i<<":");
        sleep(1);
        if ( i == 15 || i == 31 || i == 47) {
            byte pingreq[] = { 0xC0,0x0 };
            shimClient.expect(pingreq,2);
            byte pingresp[] = { 0xD0,0x0 };
            shimClient.respond(pingresp,2);
        }
        shimClient.respond(publish,16);
        rc = client.loop();
        IS_TRUE(rc);
        IS_FALSE(shimClient.error());
    }

    END_IT
}

开发者ID:1125384055，项目名称:libraries，代码行数:32，代码来源:keepalive_spec.cpp

示例13: test_connect_fails_on_no_response

int test_connect_fails_on_no_response() {
    IT("fails to connect if no response received after 15 seconds");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_FALSE(rc);
    END_IT
}

开发者ID:bugduino，项目名称:pubsubclient，代码行数:9，代码来源:connect_spec.cpp

示例14: test_connect_fails_no_network

int test_connect_fails_no_network() {
    IT("fails to connect if underlying client doesn't connect");
    ShimClient shimClient;
    shimClient.setAllowConnect(false);
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_FALSE(rc);
    END_IT
}

开发者ID:bugduino，项目名称:pubsubclient，代码行数:9，代码来源:connect_spec.cpp

示例15: test_connect_fails_on_bad_rc

int test_connect_fails_on_bad_rc() {
    IT("fails to connect if a bad return code is received");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    byte connack[] = { 0x20, 0x02, 0x00, 0x01 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_FALSE(rc);
    END_IT
}

开发者ID:bugduino，项目名称:pubsubclient，代码行数:12，代码来源:connect_spec.cpp

示例16: test_publish_not_connected

int test_publish_not_connected() {
    IT("publish fails when not connected");
    ShimClient shimClient;

    PubSubClient client(server, 1883, callback, shimClient);

    int rc = client.publish((char*)"topic",(char*)"payload");
    IS_FALSE(rc);

    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:schidler，项目名称:pubsubclient，代码行数:13，代码来源:publish_spec.cpp

示例17: test_subscribe_not_connected

int test_subscribe_not_connected() {
    IT("subscribe fails when not connected");
    ShimClient shimClient;

    PubSubClient client(server, 1883, callback, shimClient);

    int rc = client.subscribe((char*)"topic");
    IS_FALSE(rc);

    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:schidler，项目名称:pubsubclient，代码行数:13，代码来源:subscribe_spec.cpp

示例18: test_connect_properly_formatted_hostname

int test_connect_properly_formatted_hostname() {
    IT("accepts a hostname");
    ShimClient shimClient;
    
    shimClient.setAllowConnect(true);
    shimClient.expectConnect((char* const)"localhost",1883);
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client((char* const)"localhost", 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());
    
    END_IT
}

开发者ID:bugduino，项目名称:pubsubclient，代码行数:16，代码来源:connect_spec.cpp

示例19: test_connect_disconnect_connect

int test_connect_disconnect_connect() {
    IT("connects, disconnects and connects again");
    ShimClient shimClient;

    shimClient.setAllowConnect(true);
    byte expectServer[] = { 172, 16, 0, 2 };
    shimClient.expectConnect(expectServer,1883);
    byte connect[] = {0x10,0x18,0x0,0x4,0x4d,0x51,0x54,0x54,0x4,0x2,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };

    shimClient.expect(connect,26);
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);

    int state = client.state();
    IS_TRUE(state == MQTT_DISCONNECTED);

    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    state = client.state();
    IS_TRUE(state == MQTT_CONNECTED);

    byte disconnect[] = {0xE0,0x00};
    shimClient.expect(disconnect,2);

    client.disconnect();

    IS_FALSE(client.connected());
    IS_FALSE(shimClient.connected());
    IS_FALSE(shimClient.error());

    state = client.state();
    IS_TRUE(state == MQTT_DISCONNECTED);

    shimClient.expect(connect,28);
    shimClient.respond(connack,4);
    rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());
    state = client.state();
    IS_TRUE(state == MQTT_CONNECTED);

    END_IT
}

开发者ID:NikolasE，项目名称:pubsubclient，代码行数:47，代码来源:connect_spec.cpp

示例20: test_connect_accepts_username_password

int test_connect_accepts_username_password() {
    IT("accepts a username and password");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connect[] = { 0x10,0x26,0x0,0x6,0x4d,0x51,0x49,0x73,0x64,0x70,0x3,0xc2,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31,0x0,0x4,0x75,0x73,0x65,0x72,0x0,0x4,0x70,0x61,0x73,0x73};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.expect(connect,0x28);
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1",(char*)"user",(char*)"pass");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:bugduino，项目名称:pubsubclient，代码行数:17，代码来源:connect_spec.cpp

注：本文中的IT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ITEMGET函数代码示例发布时间：2022-05-30

C++ IStream_Write函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19227|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8645|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ IT函数代码示例

示例1: pppoutsolstat

示例2: test_connect_properly_formatted

示例3: test_receive_max_sized_message

示例4: test_keepalive_pings_idle

示例5: test_receive_qos1

示例6: test_keepalive_no_pings_inbound_qos1

示例7: udtrop_ppp

示例8: main

示例9: test_keepalive_disconnects_hung

示例10: test_publish_retained

示例11: test_receive_stream

示例12: test_keepalive_pings_with_inbound_qos0

示例13: test_connect_fails_on_no_response

示例14: test_connect_fails_no_network

示例15: test_connect_fails_on_bad_rc

示例16: test_publish_not_connected

示例17: test_subscribe_not_connected

示例18: test_connect_properly_formatted_hostname

示例19: test_connect_disconnect_connect

示例20: test_connect_accepts_username_password

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

tilwinjoy/angular-bootstrap-material: An

scotch-io/simple-laravel-crud: Code for

更的笔顺,体会更的笔画,理会更的部首

我的小程序之旅二、如何创建一个微信小程序

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053