• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ ISSET函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中ISSET函数的典型用法代码示例。如果您正苦于以下问题:C++ ISSET函数的具体用法?C++ ISSET怎么用?C++ ISSET使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了ISSET函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: uftdi_param

Static int
uftdi_param(void *vsc, int portno, struct termios *t)
{
	struct uftdi_softc *sc = vsc;
	usb_device_request_t req;
	usbd_status err;
	int rate, data, flow;

	DPRINTF(("uftdi_param: sc=%p\n", sc));

	if (sc->sc_dying)
		return (EIO);

	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
	req.bRequest = FTDI_SIO_SET_BITMODE;
	USETW(req.wValue, FTDI_BITMODE_RESET << 8 | 0x00);
	USETW(req.wIndex, portno);
	USETW(req.wLength, 0);
	err = usbd_do_request(sc->sc_udev, &req, NULL);
	if (err)
		return (EIO);

	switch (sc->sc_type) {
	case UFTDI_TYPE_SIO:
		switch (t->c_ospeed) {
		case 300: rate = ftdi_sio_b300; break;
		case 600: rate = ftdi_sio_b600; break;
		case 1200: rate = ftdi_sio_b1200; break;
		case 2400: rate = ftdi_sio_b2400; break;
		case 4800: rate = ftdi_sio_b4800; break;
		case 9600: rate = ftdi_sio_b9600; break;
		case 19200: rate = ftdi_sio_b19200; break;
		case 38400: rate = ftdi_sio_b38400; break;
		case 57600: rate = ftdi_sio_b57600; break;
		case 115200: rate = ftdi_sio_b115200; break;
		default:
			return (EINVAL);
		}
		break;

	case UFTDI_TYPE_8U232AM:
		switch(t->c_ospeed) {
		case 300: rate = ftdi_8u232am_b300; break;
		case 600: rate = ftdi_8u232am_b600; break;
		case 1200: rate = ftdi_8u232am_b1200; break;
		case 2400: rate = ftdi_8u232am_b2400; break;
		case 4800: rate = ftdi_8u232am_b4800; break;
		case 9600: rate = ftdi_8u232am_b9600; break;
		case 19200: rate = ftdi_8u232am_b19200; break;
		case 38400: rate = ftdi_8u232am_b38400; break;
		case 57600: rate = ftdi_8u232am_b57600; break;
		case 115200: rate = ftdi_8u232am_b115200; break;
		case 230400: rate = ftdi_8u232am_b230400; break;
		case 460800: rate = ftdi_8u232am_b460800; break;
		case 921600: rate = ftdi_8u232am_b921600; break;
		default:
			return (EINVAL);
		}
		break;

	default:
		return (EINVAL);
	}
	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
	req.bRequest = FTDI_SIO_SET_BAUD_RATE;
	USETW(req.wValue, rate);
	USETW(req.wIndex, portno);
	USETW(req.wLength, 0);
	DPRINTFN(2,("uftdi_param: reqtype=0x%02x req=0x%02x value=0x%04x "
		    "index=0x%04x len=%d\n", req.bmRequestType, req.bRequest,
		    UGETW(req.wValue), UGETW(req.wIndex), UGETW(req.wLength)));
	err = usbd_do_request(sc->sc_udev, &req, NULL);
	if (err)
		return (EIO);

	if (ISSET(t->c_cflag, CSTOPB))
		data = FTDI_SIO_SET_DATA_STOP_BITS_2;
	else
		data = FTDI_SIO_SET_DATA_STOP_BITS_1;
	if (ISSET(t->c_cflag, PARENB)) {
		if (ISSET(t->c_cflag, PARODD))
			data |= FTDI_SIO_SET_DATA_PARITY_ODD;
		else
			data |= FTDI_SIO_SET_DATA_PARITY_EVEN;
	} else
		data |= FTDI_SIO_SET_DATA_PARITY_NONE;
	switch (ISSET(t->c_cflag, CSIZE)) {
	case CS5:
		data |= FTDI_SIO_SET_DATA_BITS(5);
		break;
	case CS6:
		data |= FTDI_SIO_SET_DATA_BITS(6);
		break;
	case CS7:
		data |= FTDI_SIO_SET_DATA_BITS(7);
		break;
	case CS8:
		data |= FTDI_SIO_SET_DATA_BITS(8);
		break;
	}
//.........这里部分代码省略.........
开发者ID:eyberg,项目名称:rumpkernel-netbsd-src,代码行数:101,代码来源:uftdi.c


示例2: at91usart_attach_subr

void
at91usart_attach_subr(struct at91usart_softc *sc, struct at91bus_attach_args *sa)
{
	struct tty *tp;
	int err;

	printf("\n");

	if (bus_space_map(sa->sa_iot, sa->sa_addr, sa->sa_size, 0, &sc->sc_ioh))
		panic("%s: Cannot map registers", device_xname(sc->sc_dev));

	sc->sc_iot = sa->sa_iot;
	sc->sc_hwbase = sa->sa_addr;
	sc->sc_dmat = sa->sa_dmat;
	sc->sc_pid = sa->sa_pid;

	/* allocate fifos */
	err = at91pdc_alloc_fifo(sc->sc_dmat, &sc->sc_rx_fifo, AT91USART_RING_SIZE, BUS_DMA_READ | BUS_DMA_STREAMING);
	if (err)
		panic("%s: cannot allocate rx fifo", device_xname(sc->sc_dev));

	err = at91pdc_alloc_fifo(sc->sc_dmat, &sc->sc_tx_fifo, AT91USART_RING_SIZE, BUS_DMA_WRITE | BUS_DMA_STREAMING);
	if (err)
		panic("%s: cannot allocate tx fifo", device_xname(sc->sc_dev));

	/* initialize uart */
	at91_peripheral_clock(sc->sc_pid, 1);

	at91usart_writereg(sc, US_IDR, -1);
	at91usart_writereg(sc, US_RTOR, 12);	// 12-bit timeout
	at91usart_writereg(sc, US_PDC + PDC_PTCR, PDC_PTCR_TXTDIS | PDC_PTCR_RXTDIS);
	at91_intr_establish(sa->sa_pid, IPL_TTY, INTR_HIGH_LEVEL, at91usart_intr, sc);
	USART_INIT(sc, 115200U);

#ifdef	NOTYET
	if (sc->sc_iot == usart_cn_sc.sc_iot
	    && sc->sc_hwbase == usart_cn_sc.sc_hwbase) {
		usart_cn_sc.sc_attached = 1;
		/* Make sure the console is always "hardwired". */
		delay(10000);	/* wait for output to finish */
		SET(sc->sc_hwflags, COM_HW_CONSOLE);
		SET(sc->sc_swflags, TIOCFLAG_SOFTCAR);
		SET(sc->sc_ier, USART_INT_RXRDY);
		USARTREG(USART_IER) = USART_INT_RXRDY; // @@@@@
	}
#endif	// NOTYET

	tp = ttymalloc();
	tp->t_oproc = at91usart_start;
	tp->t_param = at91usart_param;
	tp->t_hwiflow = at91usart_hwiflow;

	sc->sc_tty = tp;

	tty_attach(tp);

#if	NOTYET
	if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
		int maj;

		/* locate the major number */
		maj = cdevsw_lookup_major(&at91usart_cdevsw);

		cn_tab->cn_dev = makedev(maj, device_unit(sc->sc_dev));

		aprint_normal("%s: console (maj %u  min %u  cn_dev %u)\n",
		    device_xname(sc->sc_dev), maj, device_unit(sc->sc_dev),
		    cn_tab->cn_dev);
	}
#endif	/* NOTYET */

	sc->sc_si = softint_establish(SOFTINT_SERIAL, at91usart_soft, sc);

#if NRND > 0 && defined(RND_COM)
	rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev),
			  RND_TYPE_TTY, 0);
#endif

	/* if there are no enable/disable functions, assume the device
	   is always enabled */
	if (!sc->enable)
		sc->enabled = 1;

	/* XXX configure register */
	/* xxx_config(sc) */

	SET(sc->sc_hwflags, COM_HW_DEV_OK);
}
开发者ID:lacombar,项目名称:netbsd-alc,代码行数:88,代码来源:at91usart.c


示例3: at91usart_open

int
at91usart_open(dev_t dev, int flag, int mode, struct lwp *l)
{
	struct at91usart_softc *sc;
	struct tty *tp;
	int s;
	int error;

	sc = device_lookup_private(&at91usart_cd, COMUNIT(dev));
	if (sc == NULL || !ISSET(sc->sc_hwflags, COM_HW_DEV_OK))
		return (ENXIO);

	if (!device_is_active(sc->sc_dev))
		return (ENXIO);

#ifdef KGDB
	/*
	 * If this is the kgdb port, no other use is permitted.
	 */
	if (ISSET(sc->sc_hwflags, COM_HW_KGDB))
		return (EBUSY);
#endif

	tp = sc->sc_tty;

	if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
		return (EBUSY);

	s = spltty();

	/*
	 * Do the following iff this is a first open.
	 */
	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
		struct termios t;

		tp->t_dev = dev;

		if (sc->enable) {
			if ((*sc->enable)(sc)) {
				splx(s);
				printf("%s: device enable failed\n",
				       device_xname(sc->sc_dev));
				return (EIO);
			}
			sc->enabled = 1;
#if 0
/* XXXXXXXXXXXXXXX */
			com_config(sc);
#endif
		}

		/* reset fifos: */
		AT91PDC_RESET_FIFO(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, US_PDC, &sc->sc_rx_fifo, 0);
		AT91PDC_RESET_FIFO(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, US_PDC, &sc->sc_tx_fifo, 1);

		/* reset receive */
		at91usart_writereg(sc, US_CR, US_CR_RSTSTA | US_CR_STTTO);

		/* Turn on interrupts. */
		sc->sc_ier = US_CSR_ENDRX|US_CSR_RXBUFF|US_CSR_TIMEOUT|US_CSR_RXBRK;
		at91usart_writereg(sc, US_IER, sc->sc_ier);

		/* enable DMA: */
		at91usart_writereg(sc, US_PDC + PDC_PTCR, PDC_PTCR_RXTEN);

		/*
		 * Initialize the termios status to the defaults.  Add in the
		 * sticky bits from TIOCSFLAGS.
		 */
		t.c_ispeed = 0;
/*		if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
			t.c_ospeed = usart_cn_sc.sc_ospeed;
			t.c_cflag = usart_cn_sc.sc_cflag;
		} else*/ {
			t.c_ospeed = TTYDEF_SPEED;
			t.c_cflag = TTYDEF_CFLAG;
		}
		if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
			SET(t.c_cflag, CLOCAL);
		if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
			SET(t.c_cflag, CRTSCTS);
		if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
			SET(t.c_cflag, MDMBUF);

		/* Make sure at91usart_param() will do something. */
		tp->t_ospeed = 0;
		(void) at91usart_param(tp, &t);
		tp->t_iflag = TTYDEF_IFLAG;
		tp->t_oflag = TTYDEF_OFLAG;
		tp->t_lflag = TTYDEF_LFLAG;
		ttychars(tp);
		ttsetwater(tp);

		/* and unblock. */
		CLR(sc->sc_rx_flags, RX_ANY_BLOCK);

#ifdef COM_DEBUG
		if (at91usart_debug)
			comstatus(sc, "at91usart_open  ");
//.........这里部分代码省略.........
开发者ID:lacombar,项目名称:netbsd-alc,代码行数:101,代码来源:at91usart.c


示例4: nget_9p

__private_extern__ int
nget_9p(mount_9p *nmp, fid_9p fid, qid_9p qid, vnode_t dvp, vnode_t *vpp, struct componentname *cnp, vfs_context_t ctx)
{
#pragma unused(ctx)
	struct vnode_fsparam fsp;
	struct hnode_9p *nhp;
	node_9p *np;
	uint32_t vid;
	int e, i;

	TRACE();
	nhp = HASH9P(nmp, qid.path);
loop:
	lck_mtx_lock(nmp->nodelck);
	LIST_FOREACH (np, nhp, next) {
		if(np->dir.qid.path != qid.path)
			continue;
		if (ISSET(np->flags, NODE_INIT)) {
			SET(np->flags, NODE_WAITINIT);
			msleep(np, nmp->nodelck, PINOD|PDROP, "nget_9p_init", NULL);
			goto loop;
		}
		if (ISSET(np->flags, NODE_RECL)) {
			SET(np->flags, NODE_WAITRECL);
			msleep(np, nmp->nodelck, PINOD|PDROP, "nget_9p_reclaim", NULL);
			goto loop;
		}
		vid = vnode_vid(np->vp);
		lck_mtx_unlock(nmp->nodelck);
		if (vnode_getwithvid(np->vp, vid))
			goto loop;
		
		nlock_9p(np, NODE_LCK_EXCLUSIVE);
		if (dvp && cnp && ISSET(cnp->cn_flags, MAKEENTRY) && np->dir.qid.vers!=0) {
			// DEBUG("caching %s", np->dir->name);
			cache_enter(dvp, np->vp, cnp);
		} else {
			// DEBUG("not in cache qid=%d %s", qid.vers, np->dir->name);
		}

		*vpp = np->vp;
		return 0;
	}
	
	if (fid == NOFID)
		return EFAULT;

	np = malloc_9p(sizeof(*np));
	if (np == NULL) {
err0:
		lck_mtx_unlock(nmp->nodelck);
		return ENOMEM;
	}
	np->lck = lck_rw_alloc_init(lck_grp_9p, LCK_ATTR_NULL);
	if (np->lck == NULL) {
		free_9p(np);
		goto err0;
	}

	np->nmp = nmp;
	np->fid = fid;
	np->dir.qid = qid;
	for (i=0; i<3; i++)
		np->openfid[i].fid = NOFID;

	SET(np->flags, NODE_INIT);
	LIST_INSERT_HEAD(nhp, np, next);
	nlock_9p(np, NODE_LCK_EXCLUSIVE);
	lck_mtx_unlock(nmp->nodelck);

	if ((e=ngetdir_9p(np))) {
err1:
		nunlock_9p(np);
		lck_mtx_lock(nmp->nodelck);
		LIST_REMOVE(np, next);
		CLR(np->flags, NODE_INIT);
		if (ISSET(np->flags, NODE_WAITINIT)) {
			CLR(np->flags, NODE_WAITINIT);
			wakeup(np);
		}
		lck_mtx_unlock(nmp->nodelck);
		lck_rw_free(np->lck, lck_grp_9p);
		free_9p(np);
		return e;
	}

	fsp.vnfs_mp			= nmp->mp;
	fsp.vnfs_str		= fsname;
	fsp.vnfs_dvp		= dvp;
	fsp.vnfs_fsnode		= np;
	fsp.vnfs_vops		= vnode_op_9p;
	fsp.vnfs_markroot	= dvp==NULL? TRUE: FALSE;
	fsp.vnfs_marksystem	= FALSE;
	fsp.vnfs_filesize	= np->dir.length;
	fsp.vnfs_cnp		= cnp;
	fsp.vnfs_flags		= VNFS_ADDFSREF;
	dirvtype_9p(&np->dir, ISSET(nmp->flags, F_DOTU), &fsp.vnfs_vtype, &fsp.vnfs_rdev);
	if (!dvp || !cnp || !ISSET(cnp->cn_flags, MAKEENTRY) || qid.vers==0)
		SET(fsp.vnfs_flags, VNFS_NOCACHE);

//.........这里部分代码省略.........
开发者ID:aredridel,项目名称:mac9p,代码行数:101,代码来源:vnops.c


示例5: glGetUniformLocation

void AssimpShader::render(const glm::mat4& mv_matrix,
        const glm::mat4& mv_it_matrix, const glm::mat4& mvp_matrix,
        RenderData* render_data, Material* material) {
    Mesh* mesh = render_data->mesh();
    Texture* texture;
    int feature_set = material->get_shader_feature_set();

    /* Get the texture only diffuse texture is set */
    if (ISSET(feature_set, AS_DIFFUSE_TEXTURE)) {
        texture = material->getTexture("main_texture");
        if (texture->getTarget() != GL_TEXTURE_2D) {
            std::string error =
                    "TextureShader::render : texture with wrong target.";
            throw error;
        }
    }

    /* Based on feature set get the shader program, feature set cannot exceed program count */
    program_ = program_list_[feature_set & (AS_TOTAL_GL_PROGRAM_COUNT - 1)];

    u_mvp_ = glGetUniformLocation(program_->id(), "u_mvp");
    u_texture_ = glGetUniformLocation(program_->id(), "u_texture");
    u_diffuse_color_ = glGetUniformLocation(program_->id(), "u_diffuse_color");
    u_ambient_color_ = glGetUniformLocation(program_->id(), "u_ambient_color");
    u_color_ = glGetUniformLocation(program_->id(), "u_color");
    u_opacity_ = glGetUniformLocation(program_->id(), "u_opacity");

    /* Get common attributes and uniforms from material */
    glm::vec3 color = material->getVec3("color");
    float opacity = material->getFloat("opacity");

#if _GVRF_USE_GLES3_
    mesh->generateVAO();

    glUseProgram(program_->id());
    glUniformMatrix4fv(u_mvp_, 1, GL_FALSE, glm::value_ptr(mvp_matrix));

    if (ISSET(feature_set, AS_DIFFUSE_TEXTURE)) {
        glActiveTexture (GL_TEXTURE0);
        glBindTexture(texture->getTarget(), texture->getId());
        glUniform1i(u_texture_, 0);
    } else {
        glm::vec4 diffuse_color = material->getVec4("diffuse_color");
        glm::vec4 ambient_color = material->getVec4("ambient_color");
        glUniform4f(u_diffuse_color_, diffuse_color.r, diffuse_color.g,
                diffuse_color.b, diffuse_color.a);
        glUniform4f(u_ambient_color_, ambient_color.r, ambient_color.g,
                ambient_color.b, ambient_color.a);
    }

    /* Set up bones if AS_SKINNING is set */
    if (ISSET(feature_set, AS_SKINNING)) {
        a_bone_indices_ = glGetAttribLocation(program_->id(), "a_bone_indices");
        a_bone_weights_ = glGetAttribLocation(program_->id(), "a_bone_weights");
        u_bone_matrices_ = glGetUniformLocation(program_->id(), "u_bone_matrix[0]");
        if (u_bone_matrices_ == -1) {
            LOGD("Warning! Unable to get the location of uniform u_bone_matrix[0]\n");
        }

        mesh->setBoneLoc(a_bone_indices_, a_bone_weights_);
        mesh->generateBoneArrayBuffers();

        glm::mat4 finalTransform;
        int nBones = MIN(mesh->getVertexBoneData().getNumBones(), MAX_BONES);
        for (int i = 0; i < nBones; ++i) {
            finalTransform = mesh->getVertexBoneData().getFinalBoneTransform(i);
            glUniformMatrix4fv(u_bone_matrices_ + i, 1, GL_FALSE, glm::value_ptr(finalTransform));
        }
    }

    glUniform3f(u_color_, color.r, color.g, color.b);
    glUniform1f(u_opacity_, opacity);

    glBindVertexArray(mesh->getVAOId(Material::ASSIMP_SHADER));
    glDrawElements(render_data->draw_mode(), mesh->indices().size(), GL_UNSIGNED_SHORT,
            0);
    glBindVertexArray(0);
#else
    glUseProgram(program_->id());

    glVertexAttribPointer(a_position_, 3, GL_FLOAT, GL_FALSE, 0,
            mesh->vertices().data());
    glEnableVertexAttribArray(a_position_);

    glVertexAttribPointer(a_tex_coord_, 2, GL_FLOAT, GL_FALSE, 0,
            mesh->tex_coords().data());
    glEnableVertexAttribArray(a_tex_coord_);

    glUniformMatrix4fv(u_mvp_, 1, GL_FALSE, glm::value_ptr(mvp_matrix));

    if (ISSET(feature_set, AS_DIFFUSE_TEXTURE)) {
        glActiveTexture (GL_TEXTURE0);
        glBindTexture(texture->getTarget(), texture->getId());
        glUniform1i(u_texture_, 0);
    } else {
        glm::vec4 diffuse_color = material->getVec4("diffuse_color");
        glm::vec4 ambient_color = material->getVec4("ambient_color");
        glUniform4f(u_diffuse_color_, diffuse_color.x, diffuse_color.y, diffuse_color.z, diffuse_color.w);
        glUniform4f(u_ambient_color_, ambient_color.x, ambient_color.y, ambient_color.z, ambient_color.w);
    }
//.........这里部分代码省略.........
开发者ID:Liahim,项目名称:GearVRf,代码行数:101,代码来源:assimp_shader.cpp


示例6: vnop_readdir_9p

static int
vnop_readdir_9p(struct vnop_readdir_args *ap)
{
	struct direntry de64;
	struct dirent de32;
	vnode_t vp;
	node_9p *np;
	dir_9p *dp;
	fid_9p fid;
	off_t off;
	uio_t uio;
	uint32_t i, nd, nlen, plen;
	void *p;
	int e;
	
	TRACE();
	vp = ap->a_vp;
	uio = ap->a_uio;
	np = NTO9P(vp);

	if (!vnode_isdir(vp))
		return ENOTDIR;

	if (ISSET(ap->a_flags, VNODE_READDIR_REQSEEKOFF))
		return EINVAL;

	off = uio_offset(uio);
	if (off < 0)
		return EINVAL;
	
	if (uio_resid(uio) == 0)
		return 0;

	e = 0;
	nlock_9p(np, NODE_LCK_EXCLUSIVE);
	fid = np->openfid[OREAD].fid;
	if (fid == NOFID) {
		e = EBADF;
		goto error;
	}

	if (ap->a_eofflag)
		ap->a_eofflag = 0;

	if (off == 0 || np->direntries==NULL) {
		if((e=readdirs_9p(np->nmp, fid, &np->direntries, &np->ndirentries)))
			goto error;
		if (np->ndirentries && np->direntries==NULL)
			panic("bug in readdir");
	}
	
	dp = np->direntries;
	nd = np->ndirentries;
	for (i=off; i<nd; i++) {
		if (ISSET(ap->a_flags, VNODE_READDIR_EXTENDED)) {
			bzero(&de64, sizeof(de64));
			de64.d_ino = QTOI(dp[i].qid);
			de64.d_type = dp[i].mode&DMDIR? DT_DIR: DT_REG;
			nlen = strlen(dp[i].name);
			de64.d_namlen = MIN(nlen, sizeof(de64.d_name)-1);
			bcopy(dp[i].name, de64.d_name, de64.d_namlen);
			de64.d_reclen = DIRENT64_LEN(de64.d_namlen);
			plen = de64.d_reclen;
			p = &de64;
		} else {
			bzero(&de32, sizeof(de32));
			de32.d_ino = QTOI(dp[i].qid);
			de32.d_type = dp[i].mode&DMDIR? DT_DIR: DT_REG;
			nlen = strlen(dp[i].name);
			de32.d_namlen = MIN(nlen, sizeof(de32.d_name)-1);
			bcopy(dp[i].name, de32.d_name, de32.d_namlen);
			de32.d_reclen = DIRENT32_LEN(de32.d_namlen);
			plen = de32.d_reclen;
			p = &de32;
		}

		if (uio_resid(uio) < plen)
			break;

		if ((e=uiomove(p, plen, uio)))
			goto error;
	}

	uio_setoffset(uio, i);
	if (ap->a_numdirent)
		*ap->a_numdirent = i - off;
	if (i==nd && ap->a_eofflag) {
		*ap->a_eofflag = 1;
		free_9p(np->direntries);
		np->direntries = NULL;
		np->ndirentries = 0;
	}

error:
	nunlock_9p(np);
	return e;
}
开发者ID:aredridel,项目名称:mac9p,代码行数:97,代码来源:vnops.c


示例7: vnop_open_9p

static int
vnop_open_9p(struct vnop_open_args *ap)
{
	openfid_9p *op;
	node_9p *np;
	fid_9p fid;
	qid_9p qid;
	uint32_t iounit;
	int e, flags, mode;

	TRACE();
	flags = 0;
	if (ap->a_mode)
		flags = OFLAGS(ap->a_mode);

	mode = flags & O_ACCMODE;
	CLR(flags, O_ACCMODE);
    
	CLR(flags, O_DIRECTORY|O_NONBLOCK|O_NOFOLLOW);
	CLR(flags, O_APPEND);

	/* locks implemented on the vfs layer */
	CLR(flags, O_EXLOCK|O_SHLOCK);
    
	if (ISSET(flags, O_TRUNC)) {
		SET(mode, OTRUNC);
		CLR(flags, O_TRUNC);
	}

    if (ISSET(flags, O_CLOEXEC)) {
		SET(mode, OCEXEC);
		CLR(flags, O_CLOEXEC);
	}
    
    if (ISSET(flags, O_EXCL)) {
		SET(mode, OEXCL);
		CLR(flags, O_EXCL);
	}
    
	/* vnop_creat just called */
	CLR(flags, O_CREAT);

	if (ISSET(flags, O_EVTONLY))
		CLR(flags, O_EVTONLY);
	if (ISSET(flags, FNOCACHE))
		CLR(flags, FNOCACHE);
	if (ISSET(flags, FNORDAHEAD))
		CLR(flags, FNORDAHEAD);

	if (flags) {
		DEBUG("unexpected open mode %x", flags);
		return ENOTSUP;
	}

	np = NTO9P(ap->a_vp);
	nlock_9p(np, NODE_LCK_EXCLUSIVE);
	op = ofidget(np, ap->a_mode);
	if (op->fid == NOFID) {
		if ((e=walk_9p(np->nmp, np->fid, NULL, 0, &fid, &qid)))
			goto error;	
		if ((e=open_9p(np->nmp, fid, mode, &qid, &iounit)))
			goto error;

		np->iounit = iounit;
		op->fid = fid;
	}

	/* no cache for dirs, .u or synthetic files */
	if (!vnode_isreg(np->vp) || np->dir.qid.vers==0) {
		vnode_setnocache(np->vp);
		vnode_setnoreadahead(np->vp);
	}

	OSIncrementAtomic(&op->ref);
	nunlock_9p(np);
	return 0;

error:
	clunk_9p(np->nmp, fid);
	nunlock_9p(np);
	return e;
}
开发者ID:aredridel,项目名称:mac9p,代码行数:82,代码来源:vnops.c


示例8: ucomopen

int
ucomopen(dev_t dev, int flag, int mode, struct lwp *l)
{
	int unit = UCOMUNIT(dev);
	usbd_status err;
	struct ucom_softc *sc = device_lookup_private(&ucom_cd, unit);
	struct ucom_buffer *ub;
	struct tty *tp;
	int s, i;
	int error;

	if (sc == NULL)
		return (ENXIO);

	if (sc->sc_dying)
		return (EIO);

	if (!device_is_active(sc->sc_dev))
		return (ENXIO);

	tp = sc->sc_tty;

	DPRINTF(("ucomopen: unit=%d, tp=%p\n", unit, tp));

	if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
		return (EBUSY);

	s = spltty();

	/*
	 * Do the following iff this is a first open.
	 */
	while (sc->sc_opening)
		tsleep(&sc->sc_opening, PRIBIO, "ucomop", 0);

	if (sc->sc_dying) {
		splx(s);
		return (EIO);
	}
	sc->sc_opening = 1;

	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
		struct termios t;

		tp->t_dev = dev;

		if (sc->sc_methods->ucom_open != NULL) {
			error = sc->sc_methods->ucom_open(sc->sc_parent,
							  sc->sc_portno);
			if (error) {
				ucom_cleanup(sc);
				sc->sc_opening = 0;
				wakeup(&sc->sc_opening);
				splx(s);
				return (error);
			}
		}

		ucom_status_change(sc);

		/* Clear PPS capture state on first open. */
		mutex_spin_enter(&timecounter_lock);
		memset(&sc->sc_pps_state, 0, sizeof(sc->sc_pps_state));
		sc->sc_pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
		pps_init(&sc->sc_pps_state);
		mutex_spin_exit(&timecounter_lock);

		/*
		 * Initialize the termios status to the defaults.  Add in the
		 * sticky bits from TIOCSFLAGS.
		 */
		t.c_ispeed = 0;
		t.c_ospeed = TTYDEF_SPEED;
		t.c_cflag = TTYDEF_CFLAG;
		if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
			SET(t.c_cflag, CLOCAL);
		if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
			SET(t.c_cflag, CRTSCTS);
		if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
			SET(t.c_cflag, MDMBUF);
		/* Make sure ucomparam() will do something. */
		tp->t_ospeed = 0;
		(void) ucomparam(tp, &t);
		tp->t_iflag = TTYDEF_IFLAG;
		tp->t_oflag = TTYDEF_OFLAG;
		tp->t_lflag = TTYDEF_LFLAG;
		ttychars(tp);
		ttsetwater(tp);

		/*
		 * Turn on DTR.  We must always do this, even if carrier is not
		 * present, because otherwise we'd have to use TIOCSDTR
		 * immediately after setting CLOCAL, which applications do not
		 * expect.  We always assert DTR while the device is open
		 * unless explicitly requested to deassert it.  Ditto RTS.
		 */
		ucom_dtr(sc, 1);
		ucom_rts(sc, 1);

		DPRINTF(("ucomopen: open pipes in=%d out=%d\n",
//.........这里部分代码省略.........
开发者ID:ryoon,项目名称:netbsd-xhci,代码行数:101,代码来源:ucom.c


示例9: ucomparam

static int
ucomparam(struct tty *tp, struct termios *t)
{
	struct ucom_softc *sc = device_lookup_private(&ucom_cd,
	    UCOMUNIT(tp->t_dev));
	int error;

	if (sc == NULL || sc->sc_dying)
		return (EIO);

	/* Check requested parameters. */
	if (t->c_ispeed && t->c_ispeed != t->c_ospeed)
		return (EINVAL);

	/*
	 * For the console, always force CLOCAL and !HUPCL, so that the port
	 * is always active.
	 */
	if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR)) {
		SET(t->c_cflag, CLOCAL);
		CLR(t->c_cflag, HUPCL);
	}

	/*
	 * If there were no changes, don't do anything.  This avoids dropping
	 * input and improves performance when all we did was frob things like
	 * VMIN and VTIME.
	 */
	if (tp->t_ospeed == t->c_ospeed &&
	    tp->t_cflag == t->c_cflag)
		return (0);

	/* XXX lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag); */

	/* And copy to tty. */
	tp->t_ispeed = 0;
	tp->t_ospeed = t->c_ospeed;
	tp->t_cflag = t->c_cflag;

	if (sc->sc_methods->ucom_param != NULL) {
		error = sc->sc_methods->ucom_param(sc->sc_parent, sc->sc_portno,
			    t);
		if (error)
			return (error);
	}

	/* XXX worry about CHWFLOW */

	/*
	 * Update the tty layer's idea of the carrier bit, in case we changed
	 * CLOCAL or MDMBUF.  We don't hang up here; we only do that by
	 * explicit request.
	 */
	DPRINTF(("ucomparam: l_modem\n"));
	(void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, UMSR_DCD));

#if 0
XXX what if the hardware is not open
	if (!ISSET(t->c_cflag, CHWFLOW)) {
		if (sc->sc_tx_stopped) {
			sc->sc_tx_stopped = 0;
			ucomstart(tp);
		}
	}
#endif

	return (0);
}
开发者ID:ryoon,项目名称:netbsd-xhci,代码行数:68,代码来源:ucom.c


示例10: fts_build

/*
 * This is the tricky part -- do not casually change *anything* in here.  The
 * idea is to build the linked list of entries that are used by yfts_children
 * and yfts_read.  There are lots of special cases.
 *
 * The real slowdown in walking the tree is the stat calls.  If FTS_NOSTAT is
 * set and it's a physical walk (so that symbolic links can't be directories),
 * we can do things quickly.  First, if it's a 4.4BSD file system, the type
 * of the file is in the directory entry.  Otherwise, we assume that the number
 * of subdirectories in a node is equal to the number of links to the parent.
 * The former skips all stat calls.  The latter skips stat calls in any leaf
 * directories and for any files after the subdirectories in the directory have
 * been found, cutting the stat calls by about 2/3.
 */
static FTSENT *
fts_build(FTS * sp, int type)
{
    struct dirent *dp;
    FTSENT *p, *head;
    int nitems;
    FTSENT *cur, *tail;

#ifdef _win_
    dird dirpd;
    struct DIR *dirp;
#else
    DIR *dirp;
#endif

    void *oldaddr;
    int cderrno, descend, len, level, maxlen, nlinks, saved_errno,
        nostat, doadjust;
    char *cp;

    /* Set current node pointer. */
    cur = sp->fts_cur;

    /*
     * Open the directory for reading.  If this fails, we're done.
     * If being called from yfts_read, set the fts_info field.
     */
#ifdef FTS_WHITEOUT
    if (ISSET(FTS_WHITEOUT))
        oflag = DTF_NODUP|DTF_REWIND;
    else
        oflag = DTF_HIDEW|DTF_NODUP|DTF_REWIND;
#else
#define __opendir2(path, flag) opendir(path)
#endif
    if ((dirp = __opendir2(cur->fts_accpath, oflag)) == NULL) {
        if (type == BREAD) {
            cur->fts_info = FTS_DNR;
            cur->fts_errno = errno;
        }
        return (NULL);
    }

#ifdef _win_
    dirpd = get_dird(cur->fts_accpath);
#endif

    /*
     * Nlinks is the number of possible entries of type directory in the
     * directory if we're cheating on stat calls, 0 if we're not doing
     * any stat calls at all, -1 if we're doing stats on everything.
     */
    if (type == BNAMES) {
        nlinks = 0;
        /* Be quiet about nostat, GCC. */
        nostat = 0;
    } else if (ISSET(FTS_NOSTAT) && ISSET(FTS_PHYSICAL)) {
        nlinks = cur->fts_nlink - (ISSET(FTS_SEEDOT) ? 0 : 2);
        nostat = 1;
    } else {
        nlinks = -1;
        nostat = 0;
    }

#ifdef notdef
    (void)printf("nlinks == %d (cur: %d)\n", nlinks, cur->fts_nlink);
    (void)printf("NOSTAT %d PHYSICAL %d SEEDOT %d\n",
                 ISSET(FTS_NOSTAT), ISSET(FTS_PHYSICAL), ISSET(FTS_SEEDOT));
#endif
    /*
     * If we're going to need to stat anything or we want to descend
     * and stay in the directory, chdir.  If this fails we keep going,
     * but set a flag so we don't chdir after the post-order visit.
     * We won't be able to stat anything, but we can still return the
     * names themselves.  Note, that since yfts_read won't be able to
     * chdir into the directory, it will have to return different path
     * names than before, i.e. "a/b" instead of "b".  Since the node
     * has already been visited in pre-order, have to wait until the
     * post-order visit to return the error.  There is a special case
     * here, if there was nothing to stat then it's not an error to
     * not be able to stat.  This is all fairly nasty.  If a program
     * needed sorted entries or stat information, they had better be
     * checking FTS_NS on the returned nodes.
     */
    cderrno = 0;
    if (nlinks || type == BREAD) {
//.........这里部分代码省略.........
开发者ID:noscripter,项目名称:tomita-parser,代码行数:101,代码来源:fts.cpp


示例11: file_open_shaper

int file_open_shaper(struct shaper *my, char *fname, char *flags)
{
	char line[1024], group[256]="(unnamed)";
	float sum=0, load=0, peak=0;
	float scale[12][31][7][24];
	char ff[1024];

	/* clear everything */
	memset(scale,0,sizeof(scale));
	linenum=0; 
	file=fname;

	/* "-" means stdin */
	my->fp = (strcmp(fname,"-")==0?stdin:(gl_findfile(fname,NULL,R_OK,ff,sizeof(ff))?fopen(ff,flags):NULL));
	if (my->fp==NULL)
	{
		gl_error("shaper file %s: %s", fname, strerror(errno));
		my->status = TS_DONE;
		return 0;
	}
	my->status=TS_OPEN;
	my->type = FT_FILE;
	/* TODO: these should be read from the shape file, or better yet, inferred from it */
	my->step = 3600; /* default interval step is one hour */
	my->interval = 24; /* default unint shape integrated over one day */
	memset(my->shape,0,sizeof(my->shape));
	/* load the file into the shape */
	while (fgets(line,sizeof(line),my->fp)!=NULL)
	{
		unsigned char *hours, *days, *months, *weekdays;
		char min[256],hour[256],day[256],month[256],weekday[256],value[32];
		char *p=line;
		linenum++;
		while (isspace(*p)) p++;
		if (p[0]=='\0' || p[0]=='#') continue;
		if (strcmp(group,"")!=0 && (isdigit(p[0]) || p[0]=='*'))
		{	/* shape value */
			int h, d, m, w;
			if (sscanf(line,"%s %s %s %s %[^,],%[^,\n]",min,hour,day,month,weekday,value)<6)
			{
				gl_error("%s(%d) : shape '%s' has specification '%s'", file, linenum, group, line);
				continue;
			}
			/* minutes are ignored right now */
			if (min[0]!='*') gl_warning("%s(%d) : minutes are ignored in '%s'", file, linenum, line);
			hours=hourmap(hour);
			days=daymap(day);
			months=monthmap(month);
			weekdays=weekdaymap(weekday);
			load = (float)atof(value);
			for (m=0; m<12; m++)
			{
				if (!ISSET(months,m)) continue;
				for (w=0; w<7; w++)
				{
					if (!ISSET(weekdays,w)) continue;
					for (d=0; d<31; d++)
					{
						if (!ISSET(days,d)) continue;
						for (h=0; h<24; h++)
						{
							if (!ISSET(hours,h)) continue;
							scale[m][d][w][h] = -load; /* negative indicates unscaled value */
						}
					}
				}
			}
			sum += load; /* integrate over shape */
			if (load>peak) peak=load; /* keep the highest load in the shape (that's going to be 255) */
		}
		else if (p[0]=='}')
		{	/* end shape group */
			int h, d, m, w;
			my->scale = peak/255/sum;
			/* rescale group */
			for (m=0; m<12; m++)
			{
				for (w=0; w<7; w++)
				{
					for (d=0; d<31; d++)
					{
						for (h=0; h<24; h++)
						{
							if (scale[m][d][w][h]<0)
								my->shape[m][d][w][h] = (unsigned char)(-scale[m][d][w][h] / peak * 255 +0.5); /* negative removes scaled value indicator */
						}
					}
				}
			}
			strcpy(group,"");
		}
		else if (sscanf(p,"%s {",group)==1)
		{	/* new shape group */
			sum=0;
		}
		else
		{	/* syntax error */
			gl_error("%s(%d) : shape specification '%s' is not valid", file, linenum, line);
		}
	}
//.........这里部分代码省略.........
开发者ID:mafoti,项目名称:wso2-gridlabd,代码行数:101,代码来源:file.c


示例12: yfts_children

FTSENT *
yfts_children(FTS * sp, int instr)
{
    FTSENT *p;
    dird fd;
    if (instr && instr != FTS_NAMEONLY) {
        errno = EINVAL;
        return (NULL);
    }

    /* Set current node pointer. */
    p = sp->fts_cur;

    /*
     * Errno set to 0 so user can distinguish empty directory from
     * an error.
     */
    errno = 0;

    /* Fatal errors stop here. */
    if (ISSET(FTS_STOP))
        return (NULL);

    /* Return logical hierarchy of user's arguments. */
    if (p->fts_info == FTS_INIT)
        return (p->fts_link);

    /*
     * If not a directory being visited in pre-order, stop here.  Could
     * allow FTS_DNR, assuming the user has fixed the problem, but the
     * same effect is available with FTS_AGAIN.
     */
    if (p->fts_info != FTS_D /* && p->fts_info != FTS_DNR */)
        return (NULL);

    /* Free up any previous child list. */
    if (sp->fts_child)
        fts_lfree(sp->fts_child);

    if (instr == FTS_NAMEONLY) {
        SET(FTS_NAMEONLY);
        instr = BNAMES;
    } else
        instr = BCHILD;

    /*
     * If using chdir on a relative path and called BEFORE yfts_read does
     * its chdir to the root of a traversal, we can lose -- we need to
     * chdir into the subdirectory, and we don't know where the current
     * directory is, so we can't get back so that the upcoming chdir by
     * yfts_read will work.
     */
    if (p->fts_level != FTS_ROOTLEVEL || p->fts_accpath[0] == LOCSLASH_C ||
            ISSET(FTS_NOCHDIR))
        return (sp->fts_child = fts_build(sp, instr));

    if (valid_dird(fd = get_cwdd()))
        return (NULL);
    sp->fts_child = fts_build(sp, instr);
    if (chdir_dird(fd)) {
        close_dird(fd);
        return (NULL);
    }
    close_dird(fd);
    return (sp->fts_child);
}
开发者ID:noscripter,项目名称:tomita-parser,代码行数:66,代码来源:fts.cpp


示例13: yfts_read

FTSENT *
yfts_read(FTS * sp) {
    FTSENT *p, *tmp;
    int instr;
    char *t;
    int saved_errno;

    ClearLastSystemError();

    /* If finished or unrecoverable error, return NULL. */
    if (sp->fts_cur == NULL || ISSET(FTS_STOP))
        return (NULL);

    /* Set current node pointer. */
    p = sp->fts_cur;

    /* Save and zero out user instructions. */
    instr = p->fts_instr;
    p->fts_instr = FTS_NOINSTR;

    /* Any type of file may be re-visited; re-stat and re-turn. */
    if (instr == FTS_AGAIN) {
        p->fts_info = fts_stat(sp, p, 0);
        return (p);
    }

    /*
     * Following a symlink -- SLNONE test allows application to see
     * SLNONE and recover.  If indirecting through a symlink, have
     * keep a pointer to current location.  If unable to get that
     * pointer, follow fails.
     */
    if (instr == FTS_FOLLOW &&
            (p->fts_info == FTS_SL || p->fts_info == FTS_SLNONE)) {
        p->fts_info = fts_stat(sp, p, 1);
        if (p->fts_info == FTS_D && !ISSET(FTS_NOCHDIR)) {
            if (valid_dird(p->fts_symfd = get_cwdd())) {
                p->fts_errno = errno;
                p->fts_info = FTS_ERR;
            } else
                p->fts_flags |= FTS_SYMFOLLOW;
        }
        return (p);
    }

    /* Directory in pre-order. */
    if (p->fts_info == FTS_D) {
        /* If skipped or crossed mount point, do post-order visit. */
        if (instr == FTS_SKIP ||
                (ISSET(FTS_XDEV) && p->fts_dev != sp->fts_dev)) {
            if (p->fts_flags & FTS_SYMFOLLOW)
                close_dird(p->fts_symfd);
            if (sp->fts_child) {
                fts_lfree(sp->fts_child);
                sp->fts_child = NULL;
            }
            p->fts_info = FTS_DP;
            return (p);
        }

        /* Rebuild if only read the names and now traversing. */
        if (sp->fts_child && ISSET(FTS_NAMEONLY)) {
            CLR(FTS_NAMEONLY);
            fts_lfree(sp->fts_child);
            sp->fts_child = NULL;
        }

        /*
         * Cd to the subdirectory.
         *
         * If have already read and now fail to chdir, whack the list
         * to make the names come out right, and set the parent errno
         * so the application will eventually get an error condition.
         * Set the FTS_DONTCHDIR flag so that when we logically change
         * directories back to the parent we don't do a chdir.
         *
         * If haven't read do so.  If the read fails, fts_build sets
         * FTS_STOP or the fts_info field of the node.
         */
        if (sp->fts_child) {
            if (fts_safe_changedir(sp, p, -1, p->fts_accpath)) {
                p->fts_errno = errno;
                p->fts_flags |= FTS_DONTCHDIR;
                for (p = sp->fts_child; p; p = p->fts_link)
                    p->fts_accpath =
                        p->fts_parent->fts_accpath;
            }
        } else if ((sp->fts_child = fts_build(sp, BREAD)) == NULL) {
            if (ISSET(FTS_STOP))
                return (NULL);
            return (p);
        }
        p = sp->fts_child;
        sp->fts_child = NULL;
        goto name;
    }

    /* Move to the next node on this level. */
next:
    tmp = p;
//.........这里部分代码省略.........
开发者ID:noscripter,项目名称:tomita-parser,代码行数:101,代码来源:fts.cpp


示例14: yfts_open

FTS *
yfts_open(char * const * argv, int options, int (*compar) (const FTSENT **, const FTSENT **))
{
    FTS *sp;
    FTSENT *p, *root;
    int nitems;
    FTSENT *parent, *tmp;
    int len;

    errno = 0;

    /* Options check. */
    if (options & ~FTS_OPTIONMASK) {
        errno = EINVAL;
        return (NULL);
    }

    /* Allocate/initialize the stream */
    if ((sp = (FTS*)malloc(sizeof(FTS))) == NULL)
        return (NULL);
    memset(sp, 0, sizeof(FTS));
    sp->fts_compar = compar;
    sp->fts_options = options;

    /* Shush, GCC. */
    tmp = NULL;

    /* Logical walks turn on NOCHDIR; symbolic links are too hard. */
    if (ISSET(FTS_LOGICAL))
        SET(FTS_NOCHDIR);

    /*
     * Start out with 1K of path space, and enough, in any case,
     * to hold the user's paths.
     */
    if (fts_palloc(sp, MAX(fts_maxarglen(argv), MAXPATHLEN)))
        goto mem1;

    /* Allocate/initialize root's parent. */
    if ((parent = fts_alloc(sp, "", 0)) == NULL)
        goto mem2;
    parent->fts_level = FTS_ROOTPARENTLEVEL;

    /* Allocate/initialize root(s). */
    for (root = NULL, nitems = 0; *argv; ++argv, ++nitems) {
        /* Don't allow zero-length paths. */

        len = strlen(*argv);

//Any subsequent windows call will expect no trailing slashes so we will remove them here
#ifdef _win_
        while (len && ((*argv)[len-1] == '\\' || (*argv)[len-1] == '/')) {
            --len;
        }
#endif

        if (len == 0) {
            errno = ENOENT;
            goto mem3;
        }

        p = fts_alloc(sp, *argv, len);
        p->fts_level = FTS_ROOTLEVEL;
        p->fts_parent = parent;
        p->fts_accpath = p->fts_name;
        p->fts_info = fts_stat(sp, p, ISSET(FTS_COMFOLLOW));

        /* Command-line "." and ".." are real directories. */
        if (p->fts_info == FTS_DOT)
            p->fts_info = FTS_D;

        /*
         * If comparison routine supplied, traverse in sorted
         * order; otherwise traverse in the order specified.
         */
        if (compar) {
            p->fts_link = root;
            root = p;
        } else {
            p->fts_link = NULL;
            if (root == NULL)
                tmp = root = p;
            else {
                tmp->fts_link = p;
                tmp = p;
            }
        }
    }
    if (compar && nitems > 1)
        root = fts_sort(sp, root, nitems);

    /*
     * Allocate a dummy pointer and make yfts_read think that we've just
     * finished the node before the root(s); set p->fts_info to FTS_INIT
     * so that everything about the "current" node is ignored.
     */
    if ((sp->fts_cur = fts_alloc(sp, "", 0)) == NULL)
        goto mem3;
    sp->fts_cur->fts_level = FTS_ROOTLEVEL;
    sp->fts_cur->fts_link = root;
//.........这里部分代码省略.........
开发者ID:noscripter,项目名称:tomita-parser,代码行数:101,代码来源:fts.cpp


示例15: getnewbuf

/*
 * Find a buffer which is available for use.
 *
 * We must notify getblk if we slept during the buffer allocation. When
 * that happens, we allocate a buffer anyway (unless tsleep is interrupted
 * or times out) and return !0.
 */
int
getnewbuf(int slpflag, int slptimeo, struct buf **bpp)
{
	struct buf *bp;
	int s, ret, error;

	*bpp = NULL;
	ret = 0;

start:
	s = splbio();
	/*
	 * Wake up cleaner if we're getting low on buffers.
	 */
	if (numdirtypages >= hidirtypages)
		wakeup(&bd_req);

	if ((numcleanpages <= locleanpages) &&
	    curproc != syncerproc && curproc != cleanerproc) {
		needbuffer++;
		error = tsleep(&needbuffer, slpflag|(PRIBIO+1), "getnewbuf",
				slptimeo);
		splx(s);
		if (error)
			return (1);
		ret = 1;
		goto start;
	}
	if ((bp = TAILQ_FIRST(&bufqueues[BQ_CLEAN])) == NULL) {
		/* wait for a free buffer of any kind */
		nobuffers = 1;
		error = tsleep(&nobuffers, slpflag|(PRIBIO-3),
				"getnewbuf", slptimeo);
		splx(s);
		if (error)
			return (1);
		ret = 1;
		goto start;
	}

	bremfree(bp);

	/* Buffer is no longer on free lists. */
	SET(bp->b_flags, B_BUSY);

#ifdef DIAGNOSTIC
	if (ISSET(bp->b_flags, B_DELWRI))
		panic("Dirty buffer on BQ_CLEAN");
#endif

	/* disassociate us from our vnode, if we had one... */
	if (bp->b_vp)
		brelvp(bp);

	splx(s);

#ifdef DIAGNOSTIC
	/* CLEAN buffers must have no dependencies */ 
	if (LIST_FIRST(&bp->b_dep) != NULL)
		panic("BQ_CLEAN has buffer with dependencies");
#endif

	/* clear out various other fields */
	bp->b_flags = B_BUSY;
	bp->b_dev = NODEV;
	bp->b_blkno = bp->b_lblkno = 0;
	bp->b_iodone = 0;
	bp->b_error = 0;
	bp->b_resid = 0;
	bp->b_bcount = 0;
	bp->b_dirtyoff = bp->b_dirtyend = 0;
	bp->b_validoff = bp->b_validend = 0;

	bremhash(bp);
	*bpp = bp;
	return (ret);
}
开发者ID:NKSG,项目名称:INTER_MANET_NS3,代码行数:84,代码来源:vfs_bio.c


示例16: udf_mountfs


//.........这里部分代码省略.........
			printf("Can't read sector %d of VDS\n", sector);
			goto bail;
		}
		lvd = (struct logvol_desc *)bp->b_data;
		if (!udf_checktag(&lvd->tag, TAGID_LOGVOL)) {
			ump->um_bsize = letoh32(lvd->lb_size);
			ump->um_bmask = ump->um_bsize - 1;
			ump->um_bshift = ffs(ump->um_bsize) - 1;
			fsd_part = letoh16(lvd->_lvd_use.fsd_loc.loc.part_num);
			fsd_offset = letoh32(lvd->_lvd_use.fsd_loc.loc.lb_num);
			if (udf_find_partmaps(ump, lvd))
				break;
			logvol_found = 1;
		}
		pd = (struct part_desc *)bp->b_data;
		if (!udf_checktag(&pd->tag, TAGID_PARTITION)) {
			part_found = 1;
			part_num = letoh16(pd->part_num);
			ump->um_len = ump->um_reallen = letoh32(pd->part_len);
			ump->um_start = ump->um_realstart = letoh32(pd->start_loc);
		}

		brelse(bp); 
		bp = NULL;
		if ((part_found) && (logvol_found))
			break;
	}

	if (!part_found || !logvol_found) {
		error = EINVAL;
		goto bail;
	}

	if (ISSET(ump->um_flags, UDF_MNT_USES_META)) {
		/* Read Metadata File 'File Entry' to find Metadata file. */
		struct long_ad *la;
		sector = ump->um_start + ump->um_meta_start; /* Set in udf_get_mpartmap() */
		if ((error = RDSECTOR(devvp, sector, ump->um_bsize, &bp)) != 0) {
			printf("Cannot read sector %d for Metadata File Entry\n", sector);
			error = EINVAL;
			goto bail;
		}
		xfentry = (struct extfile_entry *)bp->b_data;
		fentry = (struct file_entry *)bp->b_data;
		if (udf_checktag(&xfentry->tag, TAGID_EXTFENTRY) == 0)
		 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ ISSLASH函数代码示例发布时间:2022-05-30
下一篇:
C++ ISR_EXIT函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap