C++ ISACVersion函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ISACVersion函数的典型用法代码示例。如果您正苦于以下问题：C++ ISACVersion函数的具体用法？C++ ISACVersion怎么用？C++ ISACVersion使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ISACVersion函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: njs_cs_init_rest

static int __devinit njs_cs_init_rest(struct IsdnCard *card,
				      struct IsdnCardState *cs)
{
	const int bytecnt = 256;

	printk(KERN_INFO
		"NETjet-S: %s card configured at %#lx IRQ %d\n",
		cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
	if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
		printk(KERN_WARNING
		       "HiSax: NETjet-S config port %#lx-%#lx already in use\n",
		       cs->hw.njet.base,
		       cs->hw.njet.base + bytecnt);
		return (0);
	}
	cs->readisac  = &NETjet_ReadIC;
	cs->writeisac = &NETjet_WriteIC;
	cs->readisacfifo  = &NETjet_ReadICfifo;
	cs->writeisacfifo = &NETjet_WriteICfifo;
	cs->BC_Read_Reg  = &dummyrr;
	cs->BC_Write_Reg = &dummywr;
	cs->BC_Send_Data = &netjet_fill_dma;
	setup_isac(cs);
	cs->cardmsg = &NETjet_S_card_msg;
	cs->irq_func = &netjet_s_interrupt;
	cs->irq_flags |= IRQF_SHARED;
	ISACVersion(cs, "NETjet-S:");

	return (1);
}

开发者ID:12019，项目名称:kernel_zte_u880，代码行数:30，代码来源:nj_s.c

示例2: setup_saphir

int __init
setup_saphir(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, saphir_rev);
	printk(KERN_INFO "HiSax: HST Saphir driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_HSTSAPHIR)
		return (0);

	/* IO-Ports */
	cs->hw.saphir.cfg_reg = card->para[1];
	cs->hw.saphir.isac = card->para[1] + ISAC_DATA;
	cs->hw.saphir.hscx = card->para[1] + HSCX_DATA;
	cs->hw.saphir.ale = card->para[1] + ADDRESS_REG;
	cs->irq = card->para[0];
	if (check_region((cs->hw.saphir.cfg_reg), 6)) {
		printk(KERN_WARNING
			"HiSax: %s config port %x-%x already in use\n",
			CardType[card->typ],
			cs->hw.saphir.cfg_reg,
			cs->hw.saphir.cfg_reg + 5);
		return (0);
	} else
		request_region(cs->hw.saphir.cfg_reg,6, "saphir");

	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.saphir.cfg_reg);

	cs->hw.saphir.timer.function = (void *) SaphirWatchDog;
	cs->hw.saphir.timer.data = (long) cs;
	init_timer(&cs->hw.saphir.timer);
	cs->hw.saphir.timer.expires = jiffies + 4*HZ;
	add_timer(&cs->hw.saphir.timer);
	if (saphir_reset(cs)) {
		release_io_saphir(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &saphir_card_msg;
	cs->irq_func = &saphir_interrupt;
	ISACVersion(cs, "saphir:");
	if (HscxVersion(cs, "saphir:")) {
		printk(KERN_WARNING
		    "saphir: wrong HSCX versions check IO address\n");
		release_io_saphir(cs);
		return (0);
	}
	return (1);
}

开发者ID:JBTech，项目名称:ralink_rt5350，代码行数:59，代码来源:saphir.c

示例3: setup_sportster

int __init
setup_sportster(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, sportster_revision);
	printk(KERN_INFO "HiSax: USR Sportster driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_SPORTSTER)
		return (0);

	cs->hw.spt.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (!get_io_range(cs))
		return (0);
	cs->hw.spt.isac = cs->hw.spt.cfg_reg + SPORTSTER_ISAC;
	cs->hw.spt.hscx[0] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXA;
	cs->hw.spt.hscx[1] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXB;
	
	switch(cs->irq) {
		case 5:	cs->hw.spt.res_irq = 1;
			break;
		case 7:	cs->hw.spt.res_irq = 2;
			break;
		case 10:cs->hw.spt.res_irq = 3;
			break;
		case 11:cs->hw.spt.res_irq = 4;
			break;
		case 12:cs->hw.spt.res_irq = 5;
			break;
		case 14:cs->hw.spt.res_irq = 6;
			break;
		case 15:cs->hw.spt.res_irq = 7;
			break;
		default:release_io_sportster(cs);
			printk(KERN_WARNING "Sportster: wrong IRQ\n");
			return(0);
	}
	printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Sportster_card_msg;
	cs->irq_func = &sportster_interrupt;
	ISACVersion(cs, "Sportster:");
	if (HscxVersion(cs, "Sportster:")) {
		printk(KERN_WARNING
		       "Sportster: wrong HSCX versions check IO address\n");
		release_io_sportster(cs);
		return (0);
	}
	return (1);
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-ef_fw-20-19-8，代码行数:59，代码来源:sportster.c

示例4: setup_avm_a1_pcmcia

int __devinit
setup_avm_a1_pcmcia(struct IsdnCard *card)
{
	u_char model, vers;
	struct IsdnCardState *cs = card->cs;
	long flags;
	char tmp[64];


	strcpy(tmp, avm_revision);
	printk(KERN_INFO "HiSax: AVM A1 PCMCIA driver Rev. %s\n",
						 HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_A1_PCMCIA)
		return (0);

	cs->hw.avm.cfg_reg = card->para[1];
	cs->irq = card->para[0];


	save_flags(flags);
	outb(cs->hw.avm.cfg_reg+ASL1_OFFSET, ASL1_W_ENABLE_S0);
        sti();

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,ASL0_W_RESET);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET, ASL0_W_TDISABLE|ASL0_W_TRESET);

	restore_flags(flags);

	model = bytein(cs->hw.avm.cfg_reg+MODREG_OFFSET);
	vers = bytein(cs->hw.avm.cfg_reg+VERREG_OFFSET);

	printk(KERN_INFO "AVM A1 PCMCIA: io 0x%x irq %d model %d version %d\n",
				cs->hw.avm.cfg_reg, cs->irq, model, vers);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &AVM_card_msg;
	cs->irq_func = &avm_a1p_interrupt;

	ISACVersion(cs, "AVM A1 PCMCIA:");
	if (HscxVersion(cs, "AVM A1 PCMCIA:")) {
		printk(KERN_WARNING
		       "AVM A1 PCMCIA: wrong HSCX versions check IO address\n");
		return (0);
	}
	return (1);
}

开发者ID:romanalexander，项目名称:Trickles，代码行数:57，代码来源:avm_a1p.c

示例5: setup_mic

int __init
setup_mic(struct IsdnCard *card)
{
	int bytecnt;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, mic_revision);
	printk(KERN_INFO "HiSax: mic driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_MIC)
		return (0);

	bytecnt = 8;
	cs->hw.mic.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	cs->hw.mic.adr = cs->hw.mic.cfg_reg + MIC_ADR;
	cs->hw.mic.isac = cs->hw.mic.cfg_reg + MIC_ISAC;
	cs->hw.mic.hscx = cs->hw.mic.cfg_reg + MIC_HSCX;

	if (check_region((cs->hw.mic.cfg_reg), bytecnt)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.mic.cfg_reg,
		       cs->hw.mic.cfg_reg + bytecnt);
		return (0);
	} else {
		request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn");
	}

	printk(KERN_INFO
	       "mic: defined at 0x%x IRQ %d\n",
	       cs->hw.mic.cfg_reg,
	       cs->irq);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &mic_card_msg;
	cs->irq_func = &mic_interrupt;
	ISACVersion(cs, "mic:");
	if (HscxVersion(cs, "mic:")) {
		printk(KERN_WARNING
		    "mic: wrong HSCX versions check IO address\n");
		release_io_mic(cs);
		return (0);
	}
	return (1);
}

开发者ID:dmgerman，项目名称:linux-pre-history，代码行数:52，代码来源:mic.c

示例6: __initfunc

__initfunc(int
setup_ix1micro(struct IsdnCard *card))
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (check_region((cs->hw.ix1.cfg_reg), 4)) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		} else
			request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg");
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.ix1.cfg_reg);
	ix1_reset(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:52，代码来源:ix1_micro.c

示例7: a4t_cs_init

static int __devinit a4t_cs_init(struct IsdnCard *card,
				 struct IsdnCardState *cs,
				 u_int pci_memaddr)
{
	I20_REGISTER_FILE *pI20_Regs;

	if (!cs->irq) {		/* IRQ range check ?? */
		printk(KERN_WARNING "HiSax: Telekom A4T: No IRQ\n");
		return (0);
	}
	cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
	/* Check suspecious address */
	pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
	if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
		printk(KERN_WARNING "HiSax: Telekom A4T address "
		       "%lx-%lx suspicious\n",
		       cs->hw.ax.base, cs->hw.ax.base + 4096);
		iounmap((void *) cs->hw.ax.base);
		cs->hw.ax.base = 0;
		return (0);
	}
	cs->hw.ax.isac_adr = cs->hw.ax.base + PO_OFFSET;
	cs->hw.ax.jade_adr = cs->hw.ax.base + PO_OFFSET;
	cs->hw.ax.isac_ale = GCS_1;
	cs->hw.ax.jade_ale = GCS_3;

	printk(KERN_INFO "HiSax: Telekom A4T: Card configured at "
	       "0x%lX IRQ %d\n",
	       cs->hw.ax.base, cs->irq);

	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadJADE;
	cs->BC_Write_Reg = &WriteJADE;
	cs->BC_Send_Data = &jade_fill_fifo;
	cs->cardmsg = &BKM_card_msg;
	cs->irq_func = &bkm_interrupt;
	cs->irq_flags |= IRQF_SHARED;
	ISACVersion(cs, "Telekom A4T:");
	/* Jade version */
	JadeVersion(cs, "Telekom A4T:");

	return (1);
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:47，代码来源:bkm_a4t.c

示例8: setup_telespci

int __devinit
setup_telespci(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif

	strcpy(tmp, telespci_revision);
;
	if (cs->typ != ISDN_CTYPE_TELESPCI)
		return (0);

	if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
		if (pci_enable_device(dev_tel))
			return(0);
		cs->irq = dev_tel->irq;
		if (!cs->irq) {
;
			return(0);
		}
		cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
			PAGE_SIZE);
//		printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
//			(unsigned long long)pci_resource_start(dev_tel, 0),
;
	} else {
;
		return(0);
	}

	/* Initialize Zoran PCI controller */
	writel(0x00000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x7BFFFFFF, cs->hw.teles0.membase + 0x2C);
	writel(0x70000000, cs->hw.teles0.membase + 0x3C);
	writel(0x61000000, cs->hw.teles0.membase + 0x40);
	/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */

//	printk(KERN_INFO
//	       "HiSax: Teles PCI config irq:%d mem:%p\n",
//	       cs->irq,
;

	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &TelesPCI_card_msg;
	cs->irq_func = &telespci_interrupt;
	cs->irq_flags |= IRQF_SHARED;
	ISACVersion(cs, "TelesPCI:");
	if (HscxVersion(cs, "TelesPCI:")) {
//		printk(KERN_WARNING
;
		release_io_telespci(cs);
		return (0);
	}
	return (1);
}

开发者ID:rrowicki，项目名称:Chrono_Kernel-1，代码行数:67，代码来源:telespci.c

示例9: setup_diva


//.........这里部分代码省略.........
		}

		if (!cs->irq) {
			printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
			return(0);
		}

		if (!cs->hw.diva.cfg_reg) {
			printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
			return(0);
		}
		cs->irq_flags |= SA_SHIRQ;
#else
		printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
		return (0);
#endif /* CONFIG_PCI */
		if (cs->subtyp == DIVA_IPAC_PCI) {
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = 0;
			cs->hw.diva.hscx = 0;
			cs->hw.diva.isac_adr = 0;
			cs->hw.diva.hscx_adr = 0;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
			bytecnt = 0;
		} else {
			cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
			cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
			cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
			cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
			bytecnt = 32;
		}
	}

	printk(KERN_INFO
		"Diva: %s card configured at %#lx IRQ %d\n",
		(cs->subtyp == DIVA_PCI) ? "PCI" :
		(cs->subtyp == DIVA_ISA) ? "ISA" : 
		(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" : "IPAC PCI",
		cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI) || (cs->subtyp == DIVA_PCI))
		printk(KERN_INFO "Diva: %s PCI space at %#lx\n",
			(cs->subtyp == DIVA_PCI) ? "PCI" : "IPAC PCI",
			cs->hw.diva.pci_cfg);
	if (cs->subtyp != DIVA_IPAC_PCI) {
		if (check_region(cs->hw.diva.cfg_reg, bytecnt)) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       CardType[card->typ],
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			return (0);
		} else {
			request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn");
		}
	}
	reset_diva(cs);
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else { /* DIVA 2.0 */
		cs->hw.diva.tl.function = (void *) diva_led_handler;
		cs->hw.diva.tl.data = (long) cs;
		init_timer(&cs->hw.diva.tl);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
		       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}

开发者ID:nhanh0，项目名称:hah，代码行数:101，代码来源:diva.c

示例10: __initfunc


//.........这里部分代码省略.........
		u_int pci_ioaddr;

		cs->subtyp = 0;
		for (; pci_index < 0xff; pci_index++) {
			if (pcibios_find_device(PCI_VENDOR_EICON_DIEHL,
			   PCI_DIVA20_ID, pci_index, &pci_bus, &pci_device_fn)
			   == PCIBIOS_SUCCESSFUL)
				cs->subtyp = DIVA_PCI;
			else if (pcibios_find_device(PCI_VENDOR_EICON_DIEHL,
			   PCI_DIVA20_ID, pci_index, &pci_bus, &pci_device_fn)
			   == PCIBIOS_SUCCESSFUL)
			   	cs->subtyp = DIVA_PCI;
			else
				break;
			/* get IRQ */
			pcibios_read_config_byte(pci_bus, pci_device_fn,
				PCI_INTERRUPT_LINE, &pci_irq);

			/* get IO address */
			pcibios_read_config_dword(pci_bus, pci_device_fn,
				PCI_BASE_ADDRESS_2, &pci_ioaddr);
			if (cs->subtyp)
				break;
		}
		if (!cs->subtyp) {
			printk(KERN_WARNING "Diva: No PCI card found\n");
			return(0);
		}
		pci_index++;
		if (!pci_irq) {
			printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
			return(0);
		}

		if (!pci_ioaddr) {
			printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
			return(0);
		}
		pci_ioaddr &= ~3; /* remove io/mem flag */
		cs->hw.diva.cfg_reg = pci_ioaddr;
		cs->hw.diva.ctrl = pci_ioaddr + DIVA_PCI_CTRL;
		cs->hw.diva.isac = pci_ioaddr + DIVA_PCI_ISAC_DATA;
		cs->hw.diva.hscx = pci_ioaddr + DIVA_HSCX_DATA;
		cs->hw.diva.isac_adr = pci_ioaddr + DIVA_PCI_ISAC_ADR;
		cs->hw.diva.hscx_adr = pci_ioaddr + DIVA_HSCX_ADR;
		cs->irq = pci_irq;
		bytecnt = 32;
#else
		printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
		return (0);
#endif /* CONFIG_PCI */
	}

	printk(KERN_INFO
		"Diva: %s card configured at 0x%x IRQ %d\n",
		(cs->subtyp == DIVA_PCI) ? "PCI" :
		(cs->subtyp == DIVA_ISA) ? "ISA" : "IPAC",
		cs->hw.diva.cfg_reg, cs->irq);
	if (check_region(cs->hw.diva.cfg_reg, bytecnt)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.diva.cfg_reg,
		       cs->hw.diva.cfg_reg + bytecnt);
		return (0);
	} else {
		request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn");
	}

	reset_diva(cs);
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else {
		cs->hw.diva.tl.function = (void *) diva_led_handler;
		cs->hw.diva.tl.data = (long) cs;
		init_timer(&cs->hw.diva.tl);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
		       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}

开发者ID:shattered，项目名称:linux-m68k，代码行数:101，代码来源:diva.c

示例11: setup_asuscom

int __init
setup_asuscom(struct IsdnCard *card)
{
    int bytecnt;
    struct IsdnCardState *cs = card->cs;
    u_char val;
    char tmp[64];

    strcpy(tmp, Asuscom_revision);
    printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
    if (cs->typ != ISDN_CTYPE_ASUSCOM)
        return (0);
#ifdef __ISAPNP__
    if (!card->para[1] && isapnp_present()) {
        struct pnp_dev *pnp_d;
        while(ipid->card_vendor) {
            if ((pnp_c = pnp_find_card(ipid->card_vendor,
                                       ipid->card_device, pnp_c))) {
                pnp_d = NULL;
                if ((pnp_d = pnp_find_dev(pnp_c,
                                          ipid->vendor, ipid->function, pnp_d))) {
                    int err;

                    printk(KERN_INFO "HiSax: %s detected\n",
                           (char *)ipid->driver_data);
                    pnp_disable_dev(pnp_d);
                    err = pnp_activate_dev(pnp_d);
                    if (err<0) {
                        printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
                               __FUNCTION__, err);
                        return(0);
                    }
                    card->para[1] = pnp_port_start(pnp_d, 0);
                    card->para[0] = pnp_irq(pnp_d, 0);
                    if (!card->para[0] || !card->para[1]) {
                        printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
                               card->para[0], card->para[1]);
                        pnp_disable_dev(pnp_d);
                        return(0);
                    }
                    break;
                } else {
                    printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
                }
            }
            ipid++;
            pnp_c = NULL;
        }
        if (!ipid->card_vendor) {
            printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
            return(0);
        }
    }
#endif
    bytecnt = 8;
    cs->hw.asus.cfg_reg = card->para[1];
    cs->irq = card->para[0];
    if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
        printk(KERN_WARNING
               "HiSax: %s config port %x-%x already in use\n",
               CardType[card->typ],
               cs->hw.asus.cfg_reg,
               cs->hw.asus.cfg_reg + bytecnt);
        return (0);
    }
    printk(KERN_INFO "ISDNLink: defined at 0x%x IRQ %d\n",
           cs->hw.asus.cfg_reg, cs->irq);
    setup_isac(cs);
    cs->BC_Read_Reg = &ReadHSCX;
    cs->BC_Write_Reg = &WriteHSCX;
    cs->BC_Send_Data = &hscx_fill_fifo;
    cs->cardmsg = &Asus_card_msg;
    val = readreg(cs->hw.asus.cfg_reg + ASUS_IPAC_ALE,
                  cs->hw.asus.cfg_reg + ASUS_IPAC_DATA, IPAC_ID);
    if ((val == 1) || (val == 2)) {
        cs->subtyp = ASUS_IPAC;
        cs->hw.asus.adr  = cs->hw.asus.cfg_reg + ASUS_IPAC_ALE;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        test_and_set_bit(HW_IPAC, &cs->HW_Flags);
        cs->readisac = &ReadISAC_IPAC;
        cs->writeisac = &WriteISAC_IPAC;
        cs->readisacfifo = &ReadISACfifo_IPAC;
        cs->writeisacfifo = &WriteISACfifo_IPAC;
        cs->irq_func = &asuscom_interrupt_ipac;
        printk(KERN_INFO "Asus: IPAC version %x\n", val);
    } else {
        cs->subtyp = ASUS_ISACHSCX;
        cs->hw.asus.adr = cs->hw.asus.cfg_reg + ASUS_ADR;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_ISAC;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_HSCX;
        cs->hw.asus.u7 = cs->hw.asus.cfg_reg + ASUS_CTRL_U7;
        cs->hw.asus.pots = cs->hw.asus.cfg_reg + ASUS_CTRL_POTS;
        cs->readisac = &ReadISAC;
        cs->writeisac = &WriteISAC;
        cs->readisacfifo = &ReadISACfifo;
        cs->writeisacfifo = &WriteISACfifo;
        cs->irq_func = &asuscom_interrupt;
        ISACVersion(cs, "ISDNLink:");
        if (HscxVersion(cs, "ISDNLink:")) {
//.........这里部分代码省略.........

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:101，代码来源:asuscom.c

示例12: setup_isurf

int __devinit
setup_isurf(struct IsdnCard *card)
{
	int ver;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ISurf_revision);
	printk(KERN_INFO "HiSax: ISurf driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ != ISDN_CTYPE_ISURF)
 		return(0);
	if (card->para[1] && card->para[2]) {
		cs->hw.isurf.reset = card->para[1];
		cs->hw.isurf.phymem = card->para[2];
		cs->irq = card->para[0];
	} else {
#ifdef __ISAPNP__
		if (isapnp_present()) {
			struct pnp_dev *pnp_d = NULL;
			int err;

			cs->subtyp = 0;
			if ((pnp_c = pnp_find_card(
				ISAPNP_VENDOR('S', 'I', 'E'),
				ISAPNP_FUNCTION(0x0010), pnp_c))) {
				if (!(pnp_d = pnp_find_dev(pnp_c,
					ISAPNP_VENDOR('S', 'I', 'E'),
					ISAPNP_FUNCTION(0x0010), pnp_d))) {
					printk(KERN_ERR "ISurfPnP: PnP error card found, no device\n");
					return (0);
				}
				pnp_disable_dev(pnp_d);
				err = pnp_activate_dev(pnp_d);
				cs->hw.isurf.reset = pnp_port_start(pnp_d, 0);
				cs->hw.isurf.phymem = pnp_mem_start(pnp_d, 1);
				cs->irq = pnp_irq(pnp_d, 0);
				if (!cs->irq || !cs->hw.isurf.reset || !cs->hw.isurf.phymem) {
					printk(KERN_ERR "ISurfPnP:some resources are missing %d/%x/%lx\n",
						cs->irq, cs->hw.isurf.reset, cs->hw.isurf.phymem);
					pnp_disable_dev(pnp_d);
					return(0);
				}
			} else {
				printk(KERN_INFO "ISurfPnP: no ISAPnP card found\n");
				return(0);
			}
		} else {
			printk(KERN_INFO "ISurfPnP: no ISAPnP bus found\n");
			return(0);
		}
#else
		printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
		return (0);
#endif
	}
	if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
		printk(KERN_WARNING
			"HiSax: Siemens I-Surf config port %x already in use\n",
			cs->hw.isurf.reset);
			return (0);
	}
	if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
		printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
			"%lx-%lx already in use\n",
			cs->hw.isurf.phymem,
			cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
		release_region(cs->hw.isurf.reset, 1);
		return (0);
	}
	cs->hw.isurf.isar = ioremap(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE);
	cs->hw.isurf.isac = cs->hw.isurf.isar + ISURF_ISAC_OFFSET;
	printk(KERN_INFO
	       "ISurf: defined at 0x%x 0x%lx IRQ %d\n",
	       cs->hw.isurf.reset,
	       cs->hw.isurf.phymem,
	       cs->irq);

	setup_isac(cs);
	cs->cardmsg = &ISurf_card_msg;
	cs->irq_func = &isurf_interrupt;
	cs->auxcmd = &isurf_auxcmd;
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->bcs[0].hw.isar.reg = &cs->hw.isurf.isar_r;
	cs->bcs[1].hw.isar.reg = &cs->hw.isurf.isar_r;
	test_and_set_bit(HW_ISAR, &cs->HW_Flags);
	ISACVersion(cs, "ISurf:");
	cs->BC_Read_Reg = &ReadISAR;
	cs->BC_Write_Reg = &WriteISAR;
	cs->BC_Send_Data = &isar_fill_fifo;
	ver = ISARVersion(cs, "ISurf:");
	if (ver < 0) {
		printk(KERN_WARNING
			"ISurf: wrong ISAR version (ret = %d)\n", ver);
		release_io_isurf(cs);
		return (0);
	}
//.........这里部分代码省略.........

开发者ID:robacklin，项目名称:ts4700，代码行数:101，代码来源:isurf.c

示例13: setup_diva_common

static int setup_diva_common(struct IsdnCardState *cs)
{
	int bytecnt;
	u_char val;

	if ((cs->subtyp == DIVA_ISA) || (cs->subtyp == DIVA_IPAC_ISA))
		bytecnt = 8;
	else
		bytecnt = 32;

	printk(KERN_INFO
	       "Diva: %s card configured at %#lx IRQ %d\n",
	       (cs->subtyp == DIVA_PCI) ? "PCI" :
	       (cs->subtyp == DIVA_ISA) ? "ISA" :
	       (cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
	       (cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
	       cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI)  ||
	    (cs->subtyp == DIVA_IPACX_PCI) ||
	    (cs->subtyp == DIVA_PCI))
		printk(KERN_INFO "Diva: %s space at %#lx\n",
		       (cs->subtyp == DIVA_PCI) ? "PCI" :
		       (cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
		       cs->hw.diva.pci_cfg);
	if ((cs->subtyp != DIVA_IPAC_PCI) &&
	    (cs->subtyp != DIVA_IPACX_PCI)) {
		if (!request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn")) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       "diva",
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			iounmap_diva(cs);
			return (0);
		}
	}
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	setup_isac(cs);
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPACX_PCI) {
		cs->readisac  = &MemReadISAC_IPACX;
		cs->writeisac = &MemWriteISAC_IPACX;
		cs->readisacfifo  = &MemReadISACfifo_IPACX;
		cs->writeisacfifo = &MemWriteISACfifo_IPACX;
		cs->BC_Read_Reg  = &MemReadHSCX_IPACX;
		cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
		cs->BC_Send_Data = NULL; // function located in ipacx module
		cs->irq_func = &diva_irq_ipacx_pci;
		printk(KERN_INFO "Diva: IPACX Design Id: %x\n",
		       MemReadISAC_IPACX(cs, IPACX_ID) & 0x3F);
	} else { /* DIVA 2.0 */
		setup_timer(&cs->hw.diva.tl, (void *)diva_led_handler,
			    (long)cs);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
			       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}

开发者ID:asmalldev，项目名称:linux，代码行数:89，代码来源:diva.c

示例14: setup_netjet_s


//.........这里部分代码省略.........
        }
        if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
                                          PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
            if (pci_enable_device(dev_netjet))
                return(0);
            pci_set_master(dev_netjet);
            cs->irq = dev_netjet->irq;
            if (!cs->irq) {
                printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
                return(0);
            }
            cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
            if (!cs->hw.njet.base) {
                printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
                return(0);
            }
        } else {
            printk(KERN_WARNING "NETjet-S: No PCI card found\n");
            return(0);
        }

        cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
        cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;

        save_flags(flags);
        sti();

        cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
        byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);

        set_current_state(TASK_UNINTERRUPTIBLE);
        schedule_timeout((10*HZ)/1000);	/* Timeout 10ms */

        cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
        byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);

        set_current_state(TASK_UNINTERRUPTIBLE);
        schedule_timeout((10*HZ)/1000);	/* Timeout 10ms */

        restore_flags(flags);

        cs->hw.njet.auxd = 0xC0;
        cs->hw.njet.dmactrl = 0;

        byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
        byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
        byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);

        switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
        {
        case 0 :
            break;

        case 3 :
            printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
            continue;

        default :
            printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
            return 0;
        }
        break;
    }
#else

    printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
    printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
    return (0);

#endif /* CONFIG_PCI */

    bytecnt = 256;

    printk(KERN_INFO
           "NETjet-S: PCI card configured at %#lx IRQ %d\n",
           cs->hw.njet.base, cs->irq);
    if (check_region(cs->hw.njet.base, bytecnt)) {
        printk(KERN_WARNING
               "HiSax: %s config port %#lx-%#lx already in use\n",
               CardType[card->typ],
               cs->hw.njet.base,
               cs->hw.njet.base + bytecnt);
        return (0);
    } else {
        request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn");
    }
    reset_netjet_s(cs);
    cs->readisac  = &NETjet_ReadIC;
    cs->writeisac = &NETjet_WriteIC;
    cs->readisacfifo  = &NETjet_ReadICfifo;
    cs->writeisacfifo = &NETjet_WriteICfifo;
    cs->BC_Read_Reg  = &dummyrr;
    cs->BC_Write_Reg = &dummywr;
    cs->BC_Send_Data = &netjet_fill_dma;
    cs->cardmsg = &NETjet_S_card_msg;
    cs->irq_func = &netjet_s_interrupt;
    cs->irq_flags |= SA_SHIRQ;
    ISACVersion(cs, "NETjet-S:");
    return (1);
}

开发者ID:kevin-longkai，项目名称:edimax-br-6528n，代码行数:101，代码来源:nj_s.c

示例15: setup_sedlbauer


//.........这里部分代码省略.........
	printk(KERN_INFO "Sedlbauer: %s detected\n",
		Sedlbauer_Types[cs->subtyp]);

	setup_isac(cs);
	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
		} else {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
		}
		test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		cs->readisac = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &sedlbauer_interrupt_ipac;
		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
		printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
	} else {
		/* ISAC_HSCX oder ISAC_ISAR */
		cs->readisac = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAR;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_OFF;
			}
			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
			test_and_set_bit(HW_ISAR, &cs->HW_Flags);
			cs->irq_func = &sedlbauer_interrupt_isar;
			cs->auxcmd = &isar_auxcmd;
			ISACVersion(cs, "Sedlbauer:");
			cs->BC_Read_Reg = &ReadISAR;
			cs->BC_Write_Reg = &WriteISAR;
			cs->BC_Send_Data = &isar_fill_fifo;
			bytecnt = 3;
			while (bytecnt) {
				ver = ISARVersion(cs, "Sedlbauer:");
				if (ver < 0)
					printk(KERN_WARNING
						"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
				else
					break;
				reset_sedlbauer(cs);
				bytecnt--;
			}
			if (!bytecnt) {
				release_io_sedlbauer(cs);
				return (0);
			}
		} else {
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->irq_flags |= IRQF_SHARED;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
			}
			cs->irq_func = &sedlbauer_interrupt;
			ISACVersion(cs, "Sedlbauer:");
		
			if (HscxVersion(cs, "Sedlbauer:")) {
				printk(KERN_WARNING
					"Sedlbauer: wrong HSCX versions check IO address\n");
				release_io_sedlbauer(cs);
				return (0);
			}
		}
	}
	return (1);
}

开发者ID:robacklin，项目名称:ts7800，代码行数:101，代码来源:sedlbauer.c

示例16: setup_sedlbauer


//.........这里部分代码省略.........
	printk(KERN_INFO "Sedlbauer: %s detected\n",
		Sedlbauer_Types[cs->subtyp]);

	setup_isac(cs);
	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
		} else {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
		}
		test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		cs->readisac = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &sedlbauer_interrupt_ipac;
		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
		printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
	} else {
		/* ISAC_HSCX oder ISAC_ISAR */
		cs->readisac = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAR;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_OFF;
			}
			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
			test_and_set_bit(HW_ISAR, &cs->HW_Flags);
			cs->irq_func = &sedlbauer_interrupt_isar;
			cs->auxcmd = &isar_auxcmd;
			ISACVersion(cs, "Sedlbauer:");
			cs->BC_Read_Reg = &ReadISAR;
			cs->BC_Write_Reg = &WriteISAR;
			cs->BC_Send_Data = &isar_fill_fifo;
			bytecnt = 3;
			while (bytecnt) {
				ver = ISARVersion(cs, "Sedlbauer:");
				if (ver < 0)
					printk(KERN_WARNING
						"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
				else
					break;
				reset_sedlbauer(cs);
				bytecnt--;
			}
			if (!bytecnt) {
				release_io_sedlbauer(cs);
				return (0);
			}
		} el

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ISALIVE函数代码示例发布时间：2022-05-30

C++ IR_dprintk函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

2023-10-27

florent37/ViewAnimator: A fluent Android

2022-08-15

florent37/Shrine-MaterialDesign2: implem

2022-08-17

CVE-2020-36276

2022-09-23

SimpleSoftwareIO/simple-sms: Send and re

2022-08-13

阅读排行榜

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19222|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ ISACVersion函数代码示例

示例1: njs_cs_init_rest

示例2: setup_saphir

示例3: setup_sportster

示例4: setup_avm_a1_pcmcia

示例5: setup_mic

示例6: __initfunc

示例7: a4t_cs_init

示例8: setup_telespci

示例9: setup_diva

示例10: __initfunc

示例11: setup_asuscom

示例12: setup_isurf

示例13: setup_diva_common

示例14: setup_netjet_s

示例15: setup_sedlbauer

示例16: setup_sedlbauer

请发表评论

全部评论

上一篇：

下一篇：

delphi验证码识别之如何识别高级验证码

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053