本文整理汇总了C++中IPH_CHKSUM_SET函数的典型用法代码示例。如果您正苦于以下问题:C++ IPH_CHKSUM_SET函数的具体用法?C++ IPH_CHKSUM_SET怎么用?C++ IPH_CHKSUM_SET使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了IPH_CHKSUM_SET函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: send_ping
void send_ping(router_t *router, addr_ip_t dest_ip, addr_ip_t src_ip, uint16_t id, uint16_t count) {
int len = IPV4_HEADER_LENGTH+8;
byte *payload = malloc_or_die(len*sizeof(byte)); //Free'd (below)
struct ip_hdr *iphdr = (void *)payload;
IPH_VHLTOS_SET(iphdr, 4, 5, 0);
IPH_LEN_SET(iphdr, htons(len));
IPH_ID_SET(iphdr, 0);
IPH_OFFSET_SET(iphdr, 0);
IPH_TTL_SET(iphdr, 64);
IPH_PROTO_SET(iphdr, 1);
iphdr->src.addr = src_ip;
iphdr->dest.addr = dest_ip;
IPH_CHKSUM_SET(iphdr, 0);
IPH_CHKSUM_SET(iphdr, htons(calc_checksum(payload, IPV4_HEADER_LENGTH)));
struct icmp_echo_hdr *pihdr = (void *)payload+IPV4_HEADER_LENGTH;
ICMPH_TYPE_SET(pihdr, ICMP_TYPE_ECHO_REQUEST);
ICMPH_CODE_SET(pihdr, 0);
pihdr->id = id;
pihdr->seqno = count;
ICMPH_CHKSUM_SET(pihdr, 0);
ICMPH_CHKSUM_SET(pihdr, htons(calc_checksum(payload+IPV4_HEADER_LENGTH, 8)));
send_packet(payload, src_ip, dest_ip, len, FALSE, FALSE);
free(payload);
}
开发者ID:CharlieBashford,项目名称:P33,代码行数:29,代码来源:my_icmp.c
示例2: ip_output_if
/*-----------------------------------------------------------------------------------*/
err_t
ip_output_if(struct pbuf *p, struct ip_addr *src, struct ip_addr *dest,
u8_t ttl,
u8_t proto, struct netif *netif)
{
static struct ip_hdr *iphdr;
static u16_t ip_id = 0;
if(dest != IP_HDRINCL) {
if(pbuf_header(p, IP_HLEN)) {
DEBUGF(IP_DEBUG, ("ip_output: not enough room for IP header in pbuf\n"));
#ifdef IP_STATS
++stats.ip.err;
#endif /* IP_STATS */
pbuf_free(p);
return ERR_BUF;
}
iphdr = p->payload;
IPH_TTL_SET(iphdr, ttl);
IPH_PROTO_SET(iphdr, proto);
ip_addr_set(&(iphdr->dest), dest);
IPH_VHLTOS_SET(iphdr, 4, IP_HLEN / 4, 0);
IPH_LEN_SET(iphdr, htons(p->tot_len));
IPH_OFFSET_SET(iphdr, htons(IP_DF));
IPH_ID_SET(iphdr, htons(++ip_id));
if(ip_addr_isany(src)) {
ip_addr_set(&(iphdr->src), &(netif->ip_addr));
} else {
ip_addr_set(&(iphdr->src), src);
}
IPH_CHKSUM_SET(iphdr, 0);
#if CHECKSUM_GEN_IP
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
#endif
} else {
iphdr = p->payload;
dest = &(iphdr->dest);
}
#ifdef IP_STATS
stats.ip.xmit++;
#endif /* IP_STATS */
DEBUGF(IP_DEBUG, ("ip_output_if: %c%c ", netif->name[0], netif->name[1]));
#if IP_DEBUG
ip_debug_print(p);
#endif /* IP_DEBUG */
return netif->output(netif, p, dest);
}
开发者ID:dafyddcrosby,项目名称:L4OS,代码行数:60,代码来源:ip.c
示例3: pbuf_header
// remove MTD_FLASHMEM to speedup routing
err_t MTD_FLASHMEM Router::netif_input(pbuf *p, netif *inp)
{
eth_hdr* ethdr = (eth_hdr*)p->payload;
if (ntohs(ethdr->type) == ETHTYPE_IP)
{
// move buffer pointer to start of IP header
pbuf_header(p, -sizeof(eth_hdr));
ip_hdr* iphdr = (ip_hdr*)(p->payload);
// needs to route?
// 1. check match of source interface IP/netmask and destination IP
bool route = ((iphdr->dest.addr & inp->netmask.addr) != (inp->ip_addr.addr & inp->netmask.addr));
// 2. check if not multicast or broadcast (>=224.0.0.0 up to 255.255.255.255)
route = route && ((iphdr->dest.addr & 0xE0) != 0xE0);
if (route)
{
/*
debug("netif_input intf=%d len=%d id=%d prot=%d src=%s dst=%s route?=%c\r\n",
inp->num, p->tot_len, IPH_ID(iphdr), IPH_PROTO(iphdr),
(char const*)IPAddress(iphdr->src.addr).get_str(),
(char const*)IPAddress(iphdr->dest.addr).get_str(),
route?'Y':'N');
*/
// find destination interface
ip_addr_t ipdest;
ipdest.addr = iphdr->dest.addr;
netif* destIntf = ip_route(&ipdest);
// decrement TTL
IPH_TTL_SET(iphdr, IPH_TTL(iphdr) - 1);
if (IPH_TTL(iphdr) > 0)
{
// update IP checksum
if (IPH_CHKSUM(iphdr) >= PP_HTONS(0xffffU - 0x100))
IPH_CHKSUM_SET(iphdr, IPH_CHKSUM(iphdr) + PP_HTONS(0x100) + 1);
else
IPH_CHKSUM_SET(iphdr, IPH_CHKSUM(iphdr) + PP_HTONS(0x100));
// send the packet
ip_output_if(p, NULL, IP_HDRINCL, 0, 0, 0, destIntf);
}
pbuf_free(p);
return ERR_OK;
}
// restore buffer pointer to start of Ethernet header
pbuf_header(p, +sizeof(eth_hdr));
}
return (Router::s_prevInput[inp->num])(p, inp);
}
开发者ID:krachlatte,项目名称:ESPWebFramework,代码行数:58,代码来源:fdvnetwork.cpp
示例4: ip_forward
/**
* Forwards an IP packet. It finds an appropriate route for the
* packet, decrements the TTL value of the packet, adjusts the
* checksum and outputs the packet on the appropriate interface.
*
* @param p the packet to forward (p->payload points to IP header)
* @param iphdr the IP header of the input packet
* @param inp the netif on which this packet was received
* @return the netif on which the packet was sent (NULL if it wasn't sent)
*/
static struct netif *
ip_forward(struct pbuf *p, struct ip_hdr *iphdr, struct netif *inp)
{
struct netif *netif;
PERF_START;
/* Find network interface where to forward this IP packet to. */
netif = ip_route((struct ip_addr *)&(iphdr->dest));
if (netif == NULL) {
LWIP_DEBUGF(IP_DEBUG, ("ip_forward: no forwarding route for 0x%"X32_F" found\n",
iphdr->dest.addr));
snmp_inc_ipoutnoroutes();
return (struct netif *)NULL;
}
/* Do not forward packets onto the same network interface on which
* they arrived. */
if (netif == inp) {
LWIP_DEBUGF(IP_DEBUG, ("ip_forward: not bouncing packets back on incoming interface.\n"));
snmp_inc_ipoutnoroutes();
return (struct netif *)NULL;
}
/* decrement TTL */
IPH_TTL_SET(iphdr, IPH_TTL(iphdr) - 1);
/* send ICMP if TTL == 0 */
if (IPH_TTL(iphdr) == 0) {
snmp_inc_ipinhdrerrors();
#if LWIP_ICMP
/* Don't send ICMP messages in response to ICMP messages */
if (IPH_PROTO(iphdr) != IP_PROTO_ICMP) {
icmp_time_exceeded(p, ICMP_TE_TTL);
}
#endif /* LWIP_ICMP */
return (struct netif *)NULL;
}
/* Incrementally update the IP checksum. */
if (IPH_CHKSUM(iphdr) >= htons(0xffff - 0x100)) {
IPH_CHKSUM_SET(iphdr, IPH_CHKSUM(iphdr) + htons(0x100) + 1);
} else {
IPH_CHKSUM_SET(iphdr, IPH_CHKSUM(iphdr) + htons(0x100));
}
LWIP_DEBUGF(IP_DEBUG, ("ip_forward: forwarding packet to 0x%"X32_F"\n",
iphdr->dest.addr));
IP_STATS_INC(ip.fw);
IP_STATS_INC(ip.xmit);
snmp_inc_ipforwdatagrams();
PERF_STOP("ip_forward");
/* transmit pbuf on chosen interface */
netif->output(netif, p, (struct ip_addr *)&(iphdr->dest));
return netif;
}
开发者ID:ChijunShen,项目名称:wildfire_stm32_iso,代码行数:65,代码来源:ip.c
示例5: ip_output_if
/**
* Sends an IP packet on a network interface. This function constructs
* the IP header and calculates the IP header checksum. If the source
* IP address is NULL, the IP address of the outgoing network
* interface is filled in as source address.
* If the destination IP address is IP_HDRINCL, p is assumed to already
* include an IP header and p->payload points to it instead of the data.
*
* @param p the packet to send (p->payload points to the data, e.g. next
protocol header; if dest == IP_HDRINCL, p already includes an IP
header and p->payload points to that IP header)
* @param src the source IP address to send from (if src == IP_ADDR_ANY, the
* IP address of the netif used to send is used as source address)
* @param dest the destination IP address to send the packet to
* @param ttl the TTL value to be set in the IP header
* @param tos the TOS value to be set in the IP header
* @param proto the PROTOCOL to be set in the IP header
* @param netif the netif on which to send this packet
* @return ERR_OK if the packet was sent OK
* ERR_BUF if p doesn't have enough space for IP/LINK headers
* returns errors returned by netif->output
*
* @note ip_id: RFC791 "some host may be able to simply use
* unique identifiers independent of destination"
*/
uint8 ip_output_if(PBUF *p, IP_ADDR *src, IP_ADDR *dest,
uint8 ttl, uint8 tos,
uint8 proto, NETIF *netif)
{
IP_HDR *iphdr;
static uint16 ip_id = 0;
uint8 ret;
/* Should the IP header be generated or is it already included in p? */
if (dest != IP_HDRINCL)
{
uint16 ip_hlen = IP_HLEN;
if (p != NULL)
{
pbuf_header(p, IP_HLEN);
}
iphdr = p->payload;
IPH_TTL_SET(iphdr, ttl);
IPH_PROTO_SET(iphdr, proto);
ip_addr_set(&(iphdr->dest), dest);
IPH_VHLTOS_SET(iphdr, 4, ip_hlen / 4, tos);
IPH_LEN_SET(iphdr, htons(p->len));
IPH_OFFSET_SET(iphdr, 0);
IPH_ID_SET(iphdr, htons(ip_id));
++ip_id;
if (ip_addr_isany(src))
{
ip_addr_set(&(iphdr->src), &(netif->ip_addr));
}
else
{
ip_addr_set(&(iphdr->src), src);
}
IPH_CHKSUM_SET(iphdr, 0);
#if CHECKSUM_GEN_IP
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, ip_hlen)); //wp
#endif
}
else
{
/* IP header already included in p */
iphdr = p->payload;
dest = &(iphdr->dest);
}
//printf("fle--> nefif output\n");
ret = netif->output(netif, p, dest); // etharp_output
return ret;
}
开发者ID:imaginegit,项目名称:wifisdk,代码行数:80,代码来源:ip.c
示例6: ip_forward
/*-----------------------------------------------------------------------------------*/
static void
ip_forward(struct pbuf *p, struct ip_hdr *iphdr, struct netif *inp)
{
static struct netif *netif;
PERF_START;
if((netif = ip_route((struct ip_addr *)&(iphdr->dest))) == NULL) {
DEBUGF(IP_DEBUG, ("ip_forward: no forwarding route for 0x%lx found\n",
iphdr->dest.addr));
return;
}
/* Don't forward packets onto the same network interface on which
they arrived. */
if(netif == inp) {
DEBUGF(IP_DEBUG, ("ip_forward: not forward packets back on incoming interface.\n"));
return;
}
/* Decrement TTL and send ICMP if ttl == 0. */
IPH_TTL_SET(iphdr, IPH_TTL(iphdr) - 1);
if(IPH_TTL(iphdr) == 0) {
/* Don't send ICMP messages in response to ICMP messages */
if(IPH_PROTO(iphdr) != IP_PROTO_ICMP) {
icmp_time_exceeded(p, ICMP_TE_TTL);
}
return;
}
/* Incremental update of the IP checksum. */
if(IPH_CHKSUM(iphdr) >= htons(0xffff - 0x100)) {
IPH_CHKSUM_SET(iphdr, IPH_CHKSUM(iphdr) + htons(0x100) + 1);
} else {
IPH_CHKSUM_SET(iphdr, IPH_CHKSUM(iphdr) + htons(0x100));
}
DEBUGF(IP_DEBUG, ("ip_forward: forwarding packet to 0x%lx\n",
iphdr->dest.addr));
#ifdef IP_STATS
++stats.ip.fw;
++stats.ip.xmit;
#endif /* IP_STATS */
PERF_STOP("ip_forward");
netif->output(netif, p, (struct ip_addr *)&(iphdr->dest));
}
开发者ID:Joel397,项目名称:Ongoing_work_files,代码行数:53,代码来源:ip.c
示例7: _low_level_dhcp_send
static rt_err_t _low_level_dhcp_send(struct netif *netif,
const void *buffer,
rt_size_t size)
{
struct pbuf *p;
struct eth_hdr *ethhdr;
struct ip_hdr *iphdr;
struct udp_hdr *udphdr;
p = pbuf_alloc(PBUF_LINK,
SIZEOF_ETH_HDR + sizeof(struct ip_hdr)
+ sizeof(struct udp_hdr) + size,
PBUF_RAM);
if (p == RT_NULL) return -RT_ENOMEM;
ethhdr = (struct eth_hdr *)p->payload;
iphdr = (struct ip_hdr *)((char *)ethhdr + SIZEOF_ETH_HDR);
udphdr = (struct udp_hdr *)((char *)iphdr + sizeof(struct ip_hdr));
ETHADDR32_COPY(ðhdr->dest, (struct eth_addr *)ðbroadcast);
ETHADDR16_COPY(ðhdr->src, netif->hwaddr);
ethhdr->type = PP_HTONS(ETHTYPE_IP);
iphdr->src.addr = 0x00000000; /* src: 0.0.0.0 */
iphdr->dest.addr = 0xFFFFFFFF; /* src: 255.255.255.255 */
IPH_VHL_SET(iphdr, 4, IP_HLEN / 4);
IPH_TOS_SET(iphdr, 0x00);
IPH_LEN_SET(iphdr, htons(IP_HLEN + sizeof(struct udp_hdr) + size));
IPH_ID_SET(iphdr, htons(2));
IPH_OFFSET_SET(iphdr, 0);
IPH_TTL_SET(iphdr, 255);
IPH_PROTO_SET(iphdr, IP_PROTO_UDP);
IPH_CHKSUM_SET(iphdr, 0);
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
udphdr->src = htons(DHCP_SERVER_PORT);
udphdr->dest = htons(DHCP_CLIENT_PORT);
udphdr->len = htons(sizeof(struct udp_hdr) + size);
udphdr->chksum = 0;
memcpy((char *)udphdr + sizeof(struct udp_hdr),
buffer, size);
return netif->linkoutput(netif, p);
}
开发者ID:gastonfeng,项目名称:rt-thread,代码行数:46,代码来源:dhcp_server.c
示例8: handle_not_repsponding_to_arp
void handle_not_repsponding_to_arp(byte *payload, unsigned len) {
debug_println("Not responding to arp:\n");
packet_info_t *pi = malloc_or_die(sizeof(packet_info_t)); //Free'd (below).
pi->packet = malloc_or_die((IPV4_HEADER_OFFSET+len)*sizeof(uint8_t)); //Free'd (below).
pi->len = len;
memcpy(pi->packet+IPV4_HEADER_OFFSET, payload, len);
struct eth_hdr *ethhdr = (void *)pi->packet;
ETH_DEST_SET(ethhdr, make_mac_addr(0, 0, 0, 0, 0, 0));
ETH_SRC_SET(ethhdr, make_mac_addr(0, 0, 0, 0, 0, 0));
ETH_TYPE_SET(ethhdr, 0);
//Reverse soruce and destination again.
struct ip_hdr *iphdr;/* = (void *)pi->packet+IPV4_HEADER_OFFSET;
swap_bytes(&IPH_SRC(iphdr), &IPH_DEST(iphdr), 4);*/
unsigned i;
for (i = 0; i < pi->len; i += 2)
printf("%02X%02X ", *(pi->packet+i),*(pi->packet+i+1));
printf("\n");
if (generate_response_ICMP_packet(pi, 3, 1)) return;
iphdr = (void *)pi->packet+IPV4_HEADER_OFFSET; //pi->packet have moved in memory, so re-define.
IPH_CHKSUM_SET(iphdr, 0);
IPH_CHKSUM_SET(iphdr, htons(calc_checksum(pi->packet+IPV4_HEADER_OFFSET, IPV4_HEADER_LENGTH)));
for (i = 0; i < pi->len; i += 2)
printf("%02X%02X ", *(pi->packet+i),*(pi->packet+i+1));
printf("\n");
addr_ip_t target_ip = sr_integ_findnextip(IPH_DEST(iphdr));
char target_ip_str[STRLEN_IP];
ip_to_string(target_ip_str, target_ip);
debug_println("target_ip=%s", target_ip_str);
//send_packet(pi->packet+IPV4_HEADER_OFFSET, IPH_SRC(iphdr), target_ip, pi->len-IPV4_HEADER_OFFSET, FALSE, FALSE);
free(pi->packet);
free(pi);
}
开发者ID:CharlieBashford,项目名称:P33,代码行数:44,代码来源:arp.c
示例9: tcp_create_segment
/** Create a TCP segment usable for passing to tcp_input */
struct pbuf*
tcp_create_segment(ip_addr_t* src_ip, ip_addr_t* dst_ip,
u16_t src_port, u16_t dst_port, void* data, size_t data_len,
u32_t seqno, u32_t ackno, u8_t headerflags)
{
struct pbuf* p;
struct ip_hdr* iphdr;
struct tcp_hdr* tcphdr;
u16_t pbuf_len = (u16_t)(sizeof(struct ip_hdr) + sizeof(struct tcp_hdr) + data_len);
p = pbuf_alloc(PBUF_RAW, pbuf_len, PBUF_POOL);
EXPECT_RETNULL(p != NULL);
EXPECT_RETNULL(p->next == NULL);
memset(p->payload, 0, p->len);
iphdr = p->payload;
/* fill IP header */
iphdr->dest.addr = dst_ip->addr;
iphdr->src.addr = src_ip->addr;
IPH_VHLTOS_SET(iphdr, 4, IP_HLEN / 4, 0);
IPH_LEN_SET(iphdr, htons(p->tot_len));
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
pbuf_header(p, -(s16_t)sizeof(struct ip_hdr));
tcphdr = p->payload;
tcphdr->src = htons(src_port);
tcphdr->dest = htons(dst_port);
tcphdr->seqno = htonl(seqno);
tcphdr->ackno = htonl(ackno);
TCPH_HDRLEN_SET(tcphdr, sizeof(struct tcp_hdr)/4);
TCPH_FLAGS_SET(tcphdr, headerflags);
tcphdr->wnd = htons(TCP_WND);
/* copy data */
memcpy((char*)tcphdr + sizeof(struct tcp_hdr), data, data_len);
/* calculate checksum */
tcphdr->chksum = inet_chksum_pseudo(p, src_ip, dst_ip,
IP_PROTO_TCP, p->tot_len);
pbuf_header(p, sizeof(struct ip_hdr));
return p;
}
开发者ID:10code,项目名称:lwip,代码行数:48,代码来源:tcp_helper.c
示例10: test_udp_create_test_packet
static struct pbuf *
test_udp_create_test_packet(u16_t length, u16_t port, u32_t dst_addr)
{
err_t err;
u8_t ret;
struct udp_hdr *uh;
struct ip_hdr *ih;
struct pbuf *p;
const u8_t test_data[16] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf};
p = pbuf_alloc(PBUF_TRANSPORT, length, PBUF_POOL);
fail_unless(p != NULL);
if (p == NULL) {
return NULL;
}
fail_unless(p->next == NULL);
err = pbuf_take(p, test_data, length);
fail_unless(err == ERR_OK);
/* add UDP header */
ret = pbuf_add_header(p, sizeof(struct udp_hdr));
fail_unless(!ret);
uh = (struct udp_hdr *)p->payload;
uh->chksum = 0;
uh->dest = uh->src = lwip_htons(port);
uh->len = lwip_htons(p->tot_len);
/* add IPv4 header */
ret = pbuf_add_header(p, sizeof(struct ip_hdr));
fail_unless(!ret);
ih = (struct ip_hdr *)p->payload;
memset(ih, 0, sizeof(*ih));
ih->dest.addr = dst_addr;
ih->_len = lwip_htons(p->tot_len);
ih->_ttl = 32;
ih->_proto = IP_PROTO_UDP;
IPH_VHL_SET(ih, 4, sizeof(struct ip_hdr) / 4);
IPH_CHKSUM_SET(ih, inet_chksum(ih, sizeof(struct ip_hdr)));
return p;
}
开发者ID:0xc0170,项目名称:mbed,代码行数:39,代码来源:test_udp.c
示例11: icmp_input
//.........这里部分代码省略.........
if (pbuf_header(r, -hlen)) {
LWIP_ASSERT("icmp_input: restoring original p->payload failed\n", 0);
goto memerr;
}
/* free the original p */
pbuf_free(p);
/* we now have an identical copy of p that has room for link headers */
p = r;
} else {
/* restore p->payload to point to icmp header */
if (pbuf_header(p, -(s16_t)(PBUF_IP_HLEN + PBUF_LINK_HLEN))) {
LWIP_ASSERT("icmp_input: restoring original p->payload failed\n", 0);
goto memerr;
}
}
#endif /* LWIP_ICMP_ECHO_CHECK_INPUT_PBUF_LEN */
/* At this point, all checks are OK. */
/* We generate an answer by switching the dest and src ip addresses,
* setting the icmp type to ECHO_RESPONSE and updating the checksum. */
/* 校验完成,调整ICMP回显请求的相关字段,生成回显应答
* 交换IP数据报的源IP和目的IP地址,填写ICMP报文的类型字段,并重新计算ICMP的校验和
*/
/* 获取ICMP报头指针 */
iecho = p->payload;
/* 交换IP报头的源IP地址和目的IP地址 */
tmpaddr.addr = iphdr->src.addr;
iphdr->src.addr = iphdr->dest.addr;
iphdr->dest.addr = tmpaddr.addr;
/* 设置ICMP报文类型为回显应答 */
ICMPH_TYPE_SET(iecho, ICMP_ER);
/* adjust the checksum */
/* 调整ICMP的校验和 */
if (iecho->chksum >= htons(0xffff - (ICMP_ECHO << 8))) {
iecho->chksum += htons(ICMP_ECHO << 8) + 1;
} else {
iecho->chksum += htons(ICMP_ECHO << 8);
}
/* Set the correct TTL and recalculate the header checksum. */
/* 设置IP首部的TTL */
IPH_TTL_SET(iphdr, ICMP_TTL);
/* 计算IP首部校验和 */
IPH_CHKSUM_SET(iphdr, 0);
#if CHECKSUM_GEN_IP
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
#endif /* CHECKSUM_GEN_IP */
/* 注意:这里没有修改IP首部的标识字段,所以ICMP回显应答的IP首部的标识字段和
* ICMP回显请求的标识字段是相同的。理论上来说ICMP回显应答的IP首部标识字段应该
* 被修改,但为什么不修改?
* 对Linux主机进行ping,Linux主机回复的ICMP回显应答的IP首部的标识字段就修改了
*/
ICMP_STATS_INC(icmp.xmit);
/* increase number of messages attempted to send */
snmp_inc_icmpoutmsgs();
/* increase number of echo replies attempted to send */
snmp_inc_icmpoutechoreps();
/* pbuf的payload由ICMP的报头移动到IP的报头,hlen保存了IP报头的长度 */
if(pbuf_header(p, hlen)) {
LWIP_ASSERT("Can't move over header in packet", 0);
/* 移动失败 */
} else {
/* 移动成功 */
err_t ret;
/* 调用ip_output_if发送IP数据报,IP_HDRINCL表示IP首部已经填写好,并且
* pbuf的payload指向IP数据报首部,而不是IP载荷首部
*/
ret = ip_output_if(p, &(iphdr->src), IP_HDRINCL,
ICMP_TTL, 0, IP_PROTO_ICMP, inp);
if (ret != ERR_OK) {
LWIP_DEBUGF(ICMP_DEBUG, ("icmp_input: ip_output_if returned an error: %c.\n", ret));
}
}
break;
/* 如果ICMP类型不是ICMP回显请求,则直接忽略 */
default:
LWIP_DEBUGF(ICMP_DEBUG, ("icmp_input: ICMP type %"S16_F" code %"S16_F" not supported.\n",
(s16_t)type, (s16_t)code));
/* 更新统计量 */
ICMP_STATS_INC(icmp.proterr);
ICMP_STATS_INC(icmp.drop);
}
/* 释放pbuf */
pbuf_free(p);
return;
lenerr:
pbuf_free(p);
ICMP_STATS_INC(icmp.lenerr);
snmp_inc_icmpinerrors();
return;
#if LWIP_ICMP_ECHO_CHECK_INPUT_PBUF_LEN
memerr:
pbuf_free(p);
ICMP_STATS_INC(icmp.err);
snmp_inc_icmpinerrors();
return;
#endif /* LWIP_ICMP_ECHO_CHECK_INPUT_PBUF_LEN */
}
开发者ID:sdwuyawen,项目名称:lwip_V1.3.2,代码行数:101,代码来源:icmp.c
示例12: ip_input
//.........这里部分代码省略.........
}
}
#endif /* IP_OPTIONS_SEND */
/* generate IP header */
if (pbuf_header(p, IP_HLEN)) {
LWIP_DEBUGF(IP_DEBUG | LWIP_DBG_LEVEL_SERIOUS, ("ip_output: not enough room for IP header in pbuf\n"));
IP_STATS_INC(ip.err);
snmp_inc_ipoutdiscards();
return ERR_BUF;
}
iphdr = p->payload;
LWIP_ASSERT("check that first pbuf can hold struct ip_hdr",
(p->len >= sizeof(struct ip_hdr)));
IPH_TTL_SET(iphdr, ttl);
IPH_PROTO_SET(iphdr, proto);
ip_addr_set(&(iphdr->dest), dest);
IPH_VHLTOS_SET(iphdr, 4, ip_hlen / 4, tos);
IPH_LEN_SET(iphdr, htons(p->tot_len));
IPH_OFFSET_SET(iphdr, 0);
IPH_ID_SET(iphdr, htons(ip_id));
++ip_id;
if (ip_addr_isany(src)) {
ip_addr_set(&(iphdr->src), &(netif->ip_addr));
} else {
ip_addr_set(&(iphdr->src), src);
}
IPH_CHKSUM_SET(iphdr, 0);
#if CHECKSUM_GEN_IP
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, ip_hlen));
#endif
} else {
/* IP header already included in p */
iphdr = p->payload;
dest = &(iphdr->dest);
}
IP_STATS_INC(ip.xmit);
LWIP_DEBUGF(IP_DEBUG, ("ip_output_if: %c%c%"U16_F"\n", netif->name[0], netif->name[1], netif->num));
ip_debug_print(p);
#if ENABLE_LOOPBACK
if (ip_addr_cmp(dest, &netif->ip_addr)) {
/* Packet to self, enqueue it for loopback */
LWIP_DEBUGF(IP_DEBUG, ("netif_loop_output()"));
return netif_loop_output(netif, p, dest);
}
#endif /* ENABLE_LOOPBACK */
#if IP_FRAG
/* don't fragment if interface has mtu set to 0 [loopif] */
if (netif->mtu && (p->tot_len > netif->mtu)) {
return ip_frag(p,netif,dest);
}
#endif
LWIP_DEBUGF(IP_DEBUG, ("netif->output()"));
return netif->output(netif, p, dest);
}
开发者ID:ChijunShen,项目名称:wildfire_stm32_iso,代码行数:66,代码来源:ip.c
示例13: tcp_create_segment_wnd
/** Create a TCP segment usable for passing to tcp_input */
static struct pbuf*
tcp_create_segment_wnd(ip_addr_t* src_ip, ip_addr_t* dst_ip,
u16_t src_port, u16_t dst_port, void* data, size_t data_len,
u32_t seqno, u32_t ackno, u8_t headerflags, u16_t wnd)
{
struct pbuf *p, *q;
struct ip_hdr* iphdr;
struct tcp_hdr* tcphdr;
u16_t pbuf_len = (u16_t)(sizeof(struct ip_hdr) + sizeof(struct tcp_hdr) + data_len);
LWIP_ASSERT("data_len too big", data_len <= 0xFFFF);
p = pbuf_alloc(PBUF_RAW, pbuf_len, PBUF_POOL);
EXPECT_RETNULL(p != NULL);
/* first pbuf must be big enough to hold the headers */
EXPECT_RETNULL(p->len >= (sizeof(struct ip_hdr) + sizeof(struct tcp_hdr)));
if (data_len > 0) {
/* first pbuf must be big enough to hold at least 1 data byte, too */
EXPECT_RETNULL(p->len > (sizeof(struct ip_hdr) + sizeof(struct tcp_hdr)));
}
for(q = p; q != NULL; q = q->next) {
memset(q->payload, 0, q->len);
}
iphdr = (struct ip_hdr*)p->payload;
/* fill IP header */
iphdr->dest.addr = ip_2_ip4(dst_ip)->addr;
iphdr->src.addr = ip_2_ip4(src_ip)->addr;
IPH_VHL_SET(iphdr, 4, IP_HLEN / 4);
IPH_TOS_SET(iphdr, 0);
IPH_LEN_SET(iphdr, htons(p->tot_len));
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
/* let p point to TCP header */
pbuf_header(p, -(s16_t)sizeof(struct ip_hdr));
tcphdr = (struct tcp_hdr*)p->payload;
tcphdr->src = htons(src_port);
tcphdr->dest = htons(dst_port);
tcphdr->seqno = htonl(seqno);
tcphdr->ackno = htonl(ackno);
TCPH_HDRLEN_SET(tcphdr, sizeof(struct tcp_hdr)/4);
TCPH_FLAGS_SET(tcphdr, headerflags);
tcphdr->wnd = htons(wnd);
if (data_len > 0) {
/* let p point to TCP data */
pbuf_header(p, -(s16_t)sizeof(struct tcp_hdr));
/* copy data */
pbuf_take(p, data, (u16_t)data_len);
/* let p point to TCP header again */
pbuf_header(p, sizeof(struct tcp_hdr));
}
/* calculate checksum */
tcphdr->chksum = ip_chksum_pseudo(p,
IP_PROTO_TCP, p->tot_len, src_ip, dst_ip);
pbuf_header(p, sizeof(struct ip_hdr));
return p;
}
开发者ID:NCTU-ivan,项目名称:embarc_osp,代码行数:64,代码来源:tcp_helper.c
示例14: icmp_input
//.........这里部分代码省略.........
/* allocate new packet buffer with space for link headers */
r = pbuf_alloc(PBUF_LINK, p->tot_len, PBUF_RAM);
if (r == NULL) {
LWIP_DEBUGF(ICMP_DEBUG, ("icmp_input: allocating new pbuf failed\n"));
goto memerr;
}
LWIP_ASSERT("check that first pbuf can hold struct the ICMP header",
(r->len >= hlen + sizeof(struct icmp_echo_hdr)));
/* copy the whole packet including ip header */
if (pbuf_copy(r, p) != ERR_OK) {
LWIP_ASSERT("icmp_input: copying to new pbuf failed\n", 0);
goto memerr;
}
iphdr = r->payload;
/* switch r->payload back to icmp header */
if (pbuf_header(r, -hlen)) {
LWIP_ASSERT("icmp_input: restoring original p->payload failed\n", 0);
goto memerr;
}
/* free the original p */
pbuf_free(p);
/* we now have an identical copy of p that has room for link headers */
p = r;
} else {
/* restore p->payload to point to icmp header */
if (pbuf_header(p, -(s16_t)(PBUF_IP_HLEN + PBUF_LINK_HLEN))) {
LWIP_ASSERT("icmp_input: restoring original p->payload failed\n", 0);
goto memerr;
}
}
#endif /* LWIP_ICMP_ECHO_CHECK_INPUT_PBUF_LEN */
/* At this point, all checks are OK. */
/* We generate an answer by switching the dest and src ip addresses,
* setting the icmp type to ECHO_RESPONSE and updating the checksum. */
iecho = p->payload;
tmpaddr.addr = iphdr->src.addr;
iphdr->src.addr = iphdr->dest.addr;
iphdr->dest.addr = tmpaddr.addr;
ICMPH_TYPE_SET(iecho, ICMP_ER);
/* This part of code has been modified by ST's MCD Application Team */
/* To use the Checksum Offload Engine for the putgoing ICMP packets,
the ICMP checksum field should be set to 0, this is required only for Tx ICMP*/
#ifdef CHECKSUM_BY_HARDWARE
iecho->chksum = 0;
#else
/* adjust the checksum */
if (iecho->chksum >= htons(0xffff - (ICMP_ECHO << 8))) {
iecho->chksum += htons(ICMP_ECHO << 8) + 1;
} else {
iecho->chksum += htons(ICMP_ECHO << 8);
}
#endif
/* Set the correct TTL and recalculate the header checksum. */
IPH_TTL_SET(iphdr, ICMP_TTL);
IPH_CHKSUM_SET(iphdr, 0);
#if CHECKSUM_GEN_IP
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
#endif /* CHECKSUM_GEN_IP */
ICMP_STATS_INC(icmp.xmit);
/* increase number of messages attempted to send */
snmp_inc_icmpoutmsgs();
/* increase number of echo replies attempted to send */
snmp_inc_icmpoutechoreps();
if(pbuf_header(p, hlen)) {
LWIP_ASSERT("Can't move over header in packet", 0);
} else {
err_t ret;
ret = ip_output_if(p, &(iphdr->src), IP_HDRINCL,
ICMP_TTL, 0, IP_PROTO_ICMP, inp);
if (ret != ERR_OK) {
LWIP_DEBUGF(ICMP_DEBUG, ("icmp_input: ip_output_if returned an error: %c.\n", ret));
}
}
break;
default:
LWIP_DEBUGF(ICMP_DEBUG, ("icmp_input: ICMP type %"S16_F" code %"S16_F" not supported.\n",
(s16_t)type, (s16_t)code));
ICMP_STATS_INC(icmp.proterr);
ICMP_STATS_INC(icmp.drop);
}
pbuf_free(p);
return;
lenerr:
pbuf_free(p);
ICMP_STATS_INC(icmp.lenerr);
snmp_inc_icmpinerrors();
return;
#if LWIP_ICMP_ECHO_CHECK_INPUT_PBUF_LEN
memerr:
pbuf_free(p);
ICMP_STATS_INC(icmp.err);
snmp_inc_icmpinerrors();
return;
#endif /* LWIP_ICMP_ECHO_CHECK_INPUT_PBUF_LEN */
}
开发者ID:fanqh,项目名称:ETH_Mange,代码行数:101,代码来源:icmp.c
示例15: ip_frag
/**
* Fragment an IP datagram if too large for the netif.
*
* Chop the datagram in MTU sized chunks and send them in order
* by using a fixed size static memory buffer (PBUF_ROM)
*/
err_t
ip_frag(struct pbuf *p, struct netif *netif, struct ip_addr *dest)
{
struct pbuf *rambuf;
struct pbuf *header;
struct ip_hdr *iphdr;
u16_t nfb = 0;
u16_t left, cop;
u16_t mtu = netif->mtu;
u16_t ofo, omf;
u16_t last;
u16_t poff = IP_HLEN;
u16_t tmp;
/* Get a RAM based MTU sized pbuf */
rambuf = pbuf_alloc(PBUF_LINK, 0, PBUF_REF);
if (rambuf == NULL) {
return ERR_MEM;
}
rambuf->tot_len = rambuf->len = mtu;
rambuf->payload = MEM_ALIGN((void *)buf);
/* Copy the IP header in it */
iphdr = rambuf->payload;
memcpy(iphdr, p->payload, IP_HLEN);
/* Save original offset */
tmp = ntohs(IPH_OFFSET(iphdr));
ofo = tmp & IP_OFFMASK;
omf = tmp & IP_MF;
left = p->tot_len - IP_HLEN;
while (left) {
last = (left <= mtu - IP_HLEN);
/* Set new offset and MF flag */
ofo += nfb;
tmp = omf | (IP_OFFMASK & (ofo));
if (!last)
tmp = tmp | IP_MF;
IPH_OFFSET_SET(iphdr, htons(tmp));
/* Fill this fragment */
nfb = (mtu - IP_HLEN) / 8;
cop = last ? left : nfb * 8;
p = copy_from_pbuf(p, &poff, (u8_t *) iphdr + IP_HLEN, cop);
/* Correct header */
IPH_LEN_SET(iphdr, htons(cop + IP_HLEN));
IPH_CHKSUM_SET(iphdr, 0);
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
if (last)
pbuf_realloc(rambuf, left + IP_HLEN);
/* This part is ugly: we alloc a RAM based pbuf for
* the link level header for each chunk and then
* free it.A PBUF_ROM style pbuf for which pbuf_header
* worked would make things simpler.
*/
header = pbuf_alloc(PBUF_LINK, 0, PBUF_RAM);
if (header != NULL) {
pbuf_chain(header, rambuf);
netif->output(netif, header, dest);
IPFRAG_STATS_INC(ip_frag.xmit);
pbuf_free(header);
} else {
pbuf_free(rambuf);
return ERR_MEM;
}
left -= cop;
}
pbuf_free(rambuf);
return ERR_OK;
}
开发者ID:AldenHiggins,项目名称:ELEC424-Lab06-Scheduling-with-FreeRTOS,代码行数:82,代码来源:ip_frag.c
示例16: ip_reass
//.........这里部分代码省略.........
LWIP_ASSERT("offset / (8 * 8) < sizeof(ip_reassbitmap)",
offset / (8 * 8) < sizeof(ip_reassbitmap));
ip_reassbitmap[offset / (8 * 8)] |= bitmap_bits[(offset / 8) & 7];
LWIP_DEBUGF(IP_REASS_DEBUG,
("ip_reass: updating many bytes in bitmap (%"S16_F":%"S16_F").\n",
1 + offset / (8 * 8), (offset + len) / (8 * 8)));
for (i = 1 + offset / (8 * 8); i < (offset + len) / (8 * 8); ++i) {
ip_reassbitmap[i] = 0xff;
}
LWIP_ASSERT("(offset + len) / (8 * 8) < sizeof(ip_reassbitmap)",
(offset + len) / (8 * 8) < sizeof(ip_reassbitmap));
ip_reassbitmap[(offset + len) / (8 * 8)] |=
~bitmap_bits[((offset + len) / 8) & 7];
}
/* If this fragment has the More Fragments flag set to zero, we
know that this is the last fragment, so we can calculate the
size of the entire packet. We also set the
IP_REASS_FLAG_LASTFRAG flag to indicate that we have received
the final fragment. */
if ((ntohs(IPH_OFFSET(fraghdr)) & IP_MF) == 0) {
ip_reassflags |= IP_REASS_FLAG_LASTFRAG;
ip_reasslen = offset + len;
LWIP_DEBUGF(IP_REASS_DEBUG,
("ip_reass: last fragment seen, total len %"S16_F"\n",
ip_reasslen));
}
/* Finally, we check if we have a full packet in the buffer. We do
this by checking if we have the last fragment and if all bits
in the bitmap are set. */
if (ip_reassflags & IP_REASS_FLAG_LASTFRAG) {
/* Check all bytes up to and including all but the last byte in
the bitmap. */
LWIP_ASSERT("ip_reasslen / (8 * 8) - 1 < sizeof(ip_reassbitmap)",
ip_reasslen / (8 * 8) - 1 < sizeof(ip_reassbitmap));
for (i = 0; i < ip_reasslen / (8 * 8) - 1; ++i) {
if (ip_reassbitmap[i] != 0xff) {
LWIP_DEBUGF(IP_REASS_DEBUG,
("ip_reass: last fragment seen, bitmap %"S16_F"/%"S16_F" failed (%"X16_F")\n",
i, ip_reasslen / (8 * 8) - 1, ip_reassbitmap[i]));
goto nullreturn;
}
}
/* Check the last byte in the bitmap. It should contain just the
right amount of bits. */
LWIP_ASSERT("ip_reasslen / (8 * 8) < sizeof(ip_reassbitmap)",
ip_reasslen / (8 * 8) < sizeof(ip_reassbitmap));
if (ip_reassbitmap[ip_reasslen / (8 * 8)] !=
(u8_t) ~ bitmap_bits[ip_reasslen / 8 & 7]) {
LWIP_DEBUGF(IP_REASS_DEBUG,
("ip_reass: last fragment seen, bitmap %"S16_F" didn't contain %"X16_F" (%"X16_F")\n",
ip_reasslen / (8 * 8), ~bitmap_bits[ip_reasslen / 8 & 7],
ip_reassbitmap[ip_reasslen / (8 * 8)]));
goto nullreturn;
}
/* Pretend to be a "normal" (i.e., not fragmented) IP packet
from now on. */
ip_reasslen += IP_HLEN;
IPH_LEN_SET(iphdr, htons(ip_reasslen));
IPH_OFFSET_SET(iphdr, 0);
IPH_CHKSUM_SET(iphdr, 0);
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
/* If we have come this far, we have a full packet in the
buffer, so we allocate a pbuf and copy the packet into it. We
also reset the timer. */
ip_reasstmr = 0;
pbuf_free(p);
p = pbuf_alloc(PBUF_LINK, ip_reasslen, PBUF_POOL);
if (p != NULL) {
i = 0;
for (q = p; q != NULL; q = q->next) {
/* Copy enough bytes to fill this pbuf in the chain. The
available data in the pbuf is given by the q->len variable. */
LWIP_DEBUGF(IP_REASS_DEBUG,
("ip_reass: memcpy from %p (%"S16_F") to %p, %"S16_F" bytes\n",
(void *)&ip_reassbuf[i], i, q->payload,
q->len > ip_reasslen - i ? ip_reasslen - i : q->len));
memcpy(q->payload, &ip_reassbuf[i],
q->len > ip_reasslen - i ? ip_reasslen - i : q->len);
i += q->len;
}
IPFRAG_STATS_INC(ip_frag.fw);
} else {
IPFRAG_STATS_INC(ip_frag.memerr);
}
LWIP_DEBUGF(IP_REASS_DEBUG, ("ip_reass: p %p\n", (void*)p));
return p;
}
}
nullreturn:
IPFRAG_STATS_INC(ip_frag.drop);
pbuf_free(p);
return NULL;
}
开发者ID:AldenHiggins,项目名称:ELEC424-Lab06-Scheduling-with-FreeRTOS,代码行数:101,代码来源:ip_frag.c
示例17: ip_frag
//.........这里部分代码省略.........
LWIP_ASSERT("this needs a pbuf in one piece!",
(p->len >= (IP_HLEN)));
SMEMCPY(rambuf->payload, original_iphdr, IP_HLEN);
iphdr = (struct ip_hdr *)rambuf->payload;
/* Can just adjust p directly for needed offset. */
p->payload = (u8_t *)p->payload + poff;
p->len -= poff;
left_to_copy = cop;
while (left_to_copy) {
struct pbuf_custom_ref *pcr;
newpbuflen = (left_to_copy < p->len) ? left_to_copy : p->len;
/* Is this pbuf already empty? */
if (!newpbuflen) {
p = p->next;
continue;
}
pcr = ip_frag_alloc_pbuf_custom_ref();
if (pcr == NULL) {
pbuf_free(rambuf);
return ERR_MEM;
}
/* Mirror this pbuf, although we might not need all of it. */
newpbuf = pbuf_alloced_custom(PBUF_RAW, newpbuflen, PBUF_REF, &pcr->pc, p->payload, newpbuflen);
if (newpbuf == NULL) {
ip_frag_free_pbuf_custom_ref(pcr);
pbuf_free(rambuf);
return ERR_MEM;
}
pbuf_ref(p);
pcr->original = p;
pcr->pc.custom_free_function = ipfrag_free_pbuf_custom;
/* Add it to end of rambuf's chain, but using pbuf_cat, not pbuf_chain
* so that it is removed when pbuf_dechain is later called on rambuf.
*/
pbuf_cat(rambuf, newpbuf);
left_to_copy -= newpbuflen;
if (left_to_copy) {
p = p->next;
}
}
poff = newpbuflen;
#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
#endif /* IP_FRAG_USES_STATIC_BUF */
/* Correct header */
IPH_OFFSET_SET(iphdr, htons(tmp));
IPH_LEN_SET(iphdr, htons(cop + IP_HLEN));
IPH_CHKSUM_SET(iphdr, 0);
IPH_CHKSUM_SET(iphdr, inet_chksum(iphdr, IP_HLEN));
#if IP_FRAG_USES_STATIC_BUF
if (last) {
pbuf_realloc(rambuf, left + IP_HLEN);
}
/* This part is ugly: we alloc a RAM based pbuf for
* the link level header for each chunk and then
* free it.A PBUF_ROM style pbuf for which pbuf_header
* worked would make things simpler.
*/
header = pbuf_alloc(PBUF_LINK, 0, PBUF_RAM);
if (header != NULL) {
pbuf_chain(header, rambuf);
netif->output(netif, header, dest);
IPFRAG_STATS_INC(ip_frag.xmit);
snmp_inc_ipfragcreates();
pbuf_free(header);
} else {
LWIP_DEBUGF(IP_REASS_DEBUG, ("ip_frag: pbuf_alloc() for header failed\n"));
pbuf_free(rambuf);
return ERR_MEM;
}
#else /* IP_FRAG_USES_STATIC_BUF */
/* No need for separate header pbuf - we allowed room for it in rambuf
* when allocated.
*/
netif->output(netif, rambuf, dest);
IPFRAG_STATS_INC(ip_frag.xmit);
/* Unfortunately we can't reuse rambuf - the hardware may still be
* using the buffer. Instead we free it (and the ensuing chain) and
* recreate it next time round the loop. If we're lucky the hardware
* will have already sent the packet, the free will really free, and
* there will be zero memory penalty.
*/
pbuf_free(rambuf);
#endif /* IP_FRAG_USES_STATIC_BUF */
left -= cop;
ofo += nfb;
}
#if IP_FRAG_USES_STATIC_BUF
pbuf_free(rambuf);
#endif /* IP_FRAG_USES_STATIC_BUF */
snmp_inc_ipfragoks();
return ERR_OK;
}
开发者ID:0wsqqsw,项目名称:lantern,代码行数:101,代码来源:ip_frag.c
示例18: ip_reass
//.........这里部分代码省略.........
goto nullreturn;
}
}
/* Look for the datagram the fragment belongs to in the current datagram queue,
* remembering the previous in the queue for la
|
请发表评论