本文整理汇总了C++中IP6CB函数的典型用法代码示例。如果您正苦于以下问题:C++ IP6CB函数的具体用法?C++ IP6CB怎么用?C++ IP6CB使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了IP6CB函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ip6_frag_reasm
static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
struct net_device *dev)
{
struct net *net = container_of(fq->q.net, struct net, ipv6.frags);
struct sk_buff *fp, *head = fq->q.fragments;
int payload_len;
unsigned int nhoff;
fq_kill(fq);
if (prev) {
head = prev->next;
fp = skb_clone(head, GFP_ATOMIC);
if (!fp)
goto out_oom;
fp->next = head->next;
if (!fp->next)
fq->q.fragments_tail = fp;
prev->next = fp;
skb_morph(head, fq->q.fragments);
head->next = fq->q.fragments->next;
kfree_skb(fq->q.fragments);
fq->q.fragments = head;
}
WARN_ON(head == NULL);
WARN_ON(FRAG6_CB(head)->offset != 0);
payload_len = ((head->data - skb_network_header(head)) -
sizeof(struct ipv6hdr) + fq->q.len -
sizeof(struct frag_hdr));
if (payload_len > IPV6_MAXPLEN)
goto out_oversize;
if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC))
goto out_oom;
if (skb_has_frag_list(head)) {
struct sk_buff *clone;
int i, plen = 0;
if ((clone = alloc_skb(0, GFP_ATOMIC)) == NULL)
goto out_oom;
clone->next = head->next;
head->next = clone;
skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
skb_frag_list_init(head);
for (i = 0; i < skb_shinfo(head)->nr_frags; i++)
plen += skb_frag_size(&skb_shinfo(head)->frags[i]);
clone->len = clone->data_len = head->data_len - plen;
head->data_len -= clone->len;
head->len -= clone->len;
clone->csum = 0;
clone->ip_summed = head->ip_summed;
atomic_add(clone->truesize, &fq->q.net->mem);
}
nhoff = fq->nhoffset;
skb_network_header(head)[nhoff] = skb_transport_header(head)[0];
memmove(head->head + sizeof(struct frag_hdr), head->head,
(head->data - head->head) - sizeof(struct frag_hdr));
head->mac_header += sizeof(struct frag_hdr);
head->network_header += sizeof(struct frag_hdr);
skb_shinfo(head)->frag_list = head->next;
skb_reset_transport_header(head);
skb_push(head, head->data - skb_network_header(head));
for (fp=head->next; fp; fp = fp->next) {
head->data_len += fp->len;
head->len += fp->len;
if (head->ip_summed != fp->ip_summed)
head->ip_summed = CHECKSUM_NONE;
else if (head->ip_summed == CHECKSUM_COMPLETE)
head->csum = csum_add(head->csum, fp->csum);
head->truesize += fp->truesize;
}
atomic_sub(head->truesize, &fq->q.net->mem);
head->next = NULL;
head->dev = dev;
head->tstamp = fq->q.stamp;
ipv6_hdr(head)->payload_len = htons(payload_len);
IP6CB(head)->nhoff = nhoff;
if (head->ip_summed == CHECKSUM_COMPLETE)
head->csum = csum_partial(skb_network_header(head),
skb_network_header_len(head),
head->csum);
rcu_read_lock();
IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
//.........这里部分代码省略.........
开发者ID:Albinoman887,项目名称:pyramid-3.4.10,代码行数:101,代码来源:reassembly.c
示例2: ip6_frag_reasm
//.........这里部分代码省略.........
if (payload_len > IPV6_MAXPLEN)
goto out_oversize;
/* Head of list must not be cloned. */
if (skb_unclone(head, GFP_ATOMIC))
goto out_oom;
/* If the first fragment is fragmented itself, we split
* it to two chunks: the first with data and paged part
* and the second, holding only fragments. */
if (skb_has_frag_list(head)) {
struct sk_buff *clone;
int i, plen = 0;
clone = alloc_skb(0, GFP_ATOMIC);
if (!clone)
goto out_oom;
clone->next = head->next;
head->next = clone;
skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
skb_frag_list_init(head);
for (i = 0; i < skb_shinfo(head)->nr_frags; i++)
plen += skb_frag_size(&skb_shinfo(head)->frags[i]);
clone->len = clone->data_len = head->data_len - plen;
head->data_len -= clone->len;
head->len -= clone->len;
clone->csum = 0;
clone->ip_summed = head->ip_summed;
add_frag_mem_limit(fq->q.net, clone->truesize);
}
/* We have to remove fragment header from datagram and to relocate
* header in order to calculate ICV correctly. */
nhoff = fq->nhoffset;
skb_network_header(head)[nhoff] = skb_transport_header(head)[0];
memmove(head->head + sizeof(struct frag_hdr), head->head,
(head->data - head->head) - sizeof(struct frag_hdr));
if (skb_mac_header_was_set(head))
head->mac_header += sizeof(struct frag_hdr);
head->network_header += sizeof(struct frag_hdr);
skb_reset_transport_header(head);
skb_push(head, head->data - skb_network_header(head));
sum_truesize = head->truesize;
for (fp = head->next; fp;) {
bool headstolen;
int delta;
struct sk_buff *next = fp->next;
sum_truesize += fp->truesize;
if (head->ip_summed != fp->ip_summed)
head->ip_summed = CHECKSUM_NONE;
else if (head->ip_summed == CHECKSUM_COMPLETE)
head->csum = csum_add(head->csum, fp->csum);
if (skb_try_coalesce(head, fp, &headstolen, &delta)) {
kfree_skb_partial(fp, headstolen);
} else {
if (!skb_shinfo(head)->frag_list)
skb_shinfo(head)->frag_list = fp;
head->data_len += fp->len;
head->len += fp->len;
head->truesize += fp->truesize;
}
fp = next;
}
sub_frag_mem_limit(fq->q.net, sum_truesize);
head->next = NULL;
head->dev = dev;
head->tstamp = fq->q.stamp;
ipv6_hdr(head)->payload_len = htons(payload_len);
ipv6_change_dsfield(ipv6_hdr(head), 0xff, ecn);
IP6CB(head)->nhoff = nhoff;
IP6CB(head)->flags |= IP6SKB_FRAGMENTED;
IP6CB(head)->frag_max_size = fq->q.max_size;
/* Yes, and fold redundant checksum back. 8) */
skb_postpush_rcsum(head, skb_network_header(head),
skb_network_header_len(head));
rcu_read_lock();
__IP6_INC_STATS(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
rcu_read_unlock();
fq->q.fragments = NULL;
fq->q.fragments_tail = NULL;
return 1;
out_oversize:
net_dbg_ratelimited("ip6_frag_reasm: payload len = %d\n", payload_len);
goto out_fail;
out_oom:
net_dbg_ratelimited("ip6_frag_reasm: no memory for reassembly\n");
out_fail:
rcu_read_lock();
__IP6_INC_STATS(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
rcu_read_unlock();
return -1;
}
开发者ID:AshishNamdev,项目名称:linux,代码行数:101,代码来源:reassembly.c
示例3: ipv6_rcv
int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
struct ipv6hdr *hdr;
u32 pkt_len;
struct inet6_dev *idev;
if (skb->pkt_type == PACKET_OTHERHOST) {
kfree_skb(skb);
return 0;
}
rcu_read_lock();
idev = __in6_dev_get(skb->dev);
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INRECEIVES);
if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL || !idev || unlikely(idev->cnf.disable_ipv6)) {
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INDISCARDS);
rcu_read_unlock();
// goto out;
kfree_skb(skb);
return 0;
}
memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));
/*
* Store incoming device index. When the packet will
* be queued, we cannot refer to skb->dev anymore.
*
* BTW, when we send a packet for our own local address on a
* non-loopback interface (e.g. ethX), it is being delivered
* via the loopback interface (lo) here; skb->dev = &loopback_dev.
* It, however, should be considered as if it is being
* arrived via the sending interface (ethX), because of the
* nature of scoping architecture. --yoshfuji
*/
IP6CB(skb)->iif = skb->dst ? ip6_dst_idev(skb->dst)->dev->ifindex : dev->ifindex;
if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
goto err;
hdr = skb->nh.ipv6h;
if (hdr->version != 6)
goto err;
/*
* RFC4291 2.5.3
* A packet received on an interface with a destination address
* of loopback must be dropped.
*/
if (!(dev->flags & IFF_LOOPBACK) && ipv6_addr_loopback(&hdr->daddr))
goto err;
skb->h.raw = (u8 *)(hdr + 1);
IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
pkt_len = ntohs(hdr->payload_len);
/* pkt_len may be zero if Jumbo payload option is present */
if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INTRUNCATEDPKTS);
goto drop;
}
if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
goto drop;
}
hdr = skb->nh.ipv6h;
}
if (hdr->nexthdr == NEXTHDR_HOP) {
if (ipv6_parse_hopopts(&skb) < 0) {
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
rcu_read_unlock();
return 0;
}
}
rcu_read_unlock();
return NF_HOOK(PF_INET6,NF_IP6_PRE_ROUTING, skb, dev, NULL, ip6_rcv_finish);
err:
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
drop:
rcu_read_unlock();
kfree_skb(skb);
//out:
return 0;
}
开发者ID:WiseMan787,项目名称:ralink_sdk,代码行数:93,代码来源:ip6_input.c
示例4: ip6_mc_input
int ip6_mc_input(struct sk_buff *skb)
{
const struct ipv6hdr *hdr;
int deliver;
IP6_UPD_PO_STATS_BH(dev_net(skb_dst(skb)->dev),
ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INMCAST,
skb->len);
hdr = ipv6_hdr(skb);
deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
#ifdef CONFIG_IPV6_MROUTE
/*
* IPv6 multicast router mode is now supported ;)
*/
if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
!(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
/*
* Okay, we try to forward - split and duplicate
* packets.
*/
struct sk_buff *skb2;
struct inet6_skb_parm *opt = IP6CB(skb);
/* Check for MLD */
if (unlikely(opt->ra)) {
/* Check if this is a mld message */
u8 *ptr = skb_network_header(skb) + opt->ra;
struct icmp6hdr *icmp6;
u8 nexthdr = hdr->nexthdr;
int offset;
/* Check if the value of Router Alert
* is for MLD (0x0000).
*/
if ((ptr[2] | ptr[3]) == 0) {
deliver = 0;
if (!ipv6_ext_hdr(nexthdr)) {
/* BUG */
goto out;
}
offset = ipv6_skip_exthdr(skb, sizeof(*hdr),
&nexthdr);
if (offset < 0)
goto out;
if (nexthdr != IPPROTO_ICMPV6)
goto out;
if (!pskb_may_pull(skb, (skb_network_header(skb) +
offset + 1 - skb->data)))
goto out;
icmp6 = (struct icmp6hdr *)(skb_network_header(skb) + offset);
switch (icmp6->icmp6_type) {
case ICMPV6_MGM_QUERY:
case ICMPV6_MGM_REPORT:
case ICMPV6_MGM_REDUCTION:
case ICMPV6_MLD2_REPORT:
deliver = 1;
break;
}
goto out;
}
/* unknown RA - process it normally */
}
if (deliver)
skb2 = skb_clone(skb, GFP_ATOMIC);
else {
skb2 = skb;
skb = NULL;
}
if (skb2) {
ip6_mr_input(skb2);
}
}
out:
#endif
if (likely(deliver))
ip6_input(skb);
else {
/* discard */
kfree_skb(skb);
}
return 0;
}
开发者ID:AmeriCanAndroid,项目名称:aca-evo3d-gsm-omega-3.0-mdj,代码行数:93,代码来源:ip6_input.c
示例5: ip6_fragment
int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
int (*output)(struct net *, struct sock *, struct sk_buff *))
{
struct sk_buff *frag;
struct rt6_info *rt = (struct rt6_info *)skb_dst(skb);
struct ipv6_pinfo *np = skb->sk && !dev_recursion_level() ?
inet6_sk(skb->sk) : NULL;
struct ipv6hdr *tmp_hdr;
struct frag_hdr *fh;
unsigned int mtu, hlen, left, len;
int hroom, troom;
__be32 frag_id;
int ptr, offset = 0, err = 0;
u8 *prevhdr, nexthdr = 0;
err = ip6_find_1stfragopt(skb, &prevhdr);
if (err < 0)
goto fail;
hlen = err;
nexthdr = *prevhdr;
mtu = ip6_skb_dst_mtu(skb);
/* We must not fragment if the socket is set to force MTU discovery
* or if the skb it not generated by a local socket.
*/
if (unlikely(!skb->ignore_df && skb->len > mtu))
goto fail_toobig;
if (IP6CB(skb)->frag_max_size) {
if (IP6CB(skb)->frag_max_size > mtu)
goto fail_toobig;
/* don't send fragments larger than what we received */
mtu = IP6CB(skb)->frag_max_size;
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
}
if (np && np->frag_size < mtu) {
if (np->frag_size)
mtu = np->frag_size;
}
if (mtu < hlen + sizeof(struct frag_hdr) + 8)
goto fail_toobig;
mtu -= hlen + sizeof(struct frag_hdr);
frag_id = ipv6_select_ident(net, &ipv6_hdr(skb)->daddr,
&ipv6_hdr(skb)->saddr);
if (skb->ip_summed == CHECKSUM_PARTIAL &&
(err = skb_checksum_help(skb)))
goto fail;
hroom = LL_RESERVED_SPACE(rt->dst.dev);
if (skb_has_frag_list(skb)) {
unsigned int first_len = skb_pagelen(skb);
struct sk_buff *frag2;
if (first_len - hlen > mtu ||
((first_len - hlen) & 7) ||
skb_cloned(skb) ||
skb_headroom(skb) < (hroom + sizeof(struct frag_hdr)))
goto slow_path;
skb_walk_frags(skb, frag) {
/* Correct geometry. */
if (frag->len > mtu ||
((frag->len & 7) && frag->next) ||
skb_headroom(frag) < (hlen + hroom + sizeof(struct frag_hdr)))
goto slow_path_clean;
/* Partially cloned skb? */
if (skb_shared(frag))
goto slow_path_clean;
BUG_ON(frag->sk);
if (skb->sk) {
frag->sk = skb->sk;
frag->destructor = sock_wfree;
}
skb->truesize -= frag->truesize;
}
err = 0;
offset = 0;
/* BUILD HEADER */
*prevhdr = NEXTHDR_FRAGMENT;
tmp_hdr = kmemdup(skb_network_header(skb), hlen, GFP_ATOMIC);
if (!tmp_hdr) {
IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
IPSTATS_MIB_FRAGFAILS);
err = -ENOMEM;
goto fail;
}
frag = skb_shinfo(skb)->frag_list;
skb_frag_list_init(skb);
__skb_pull(skb, hlen);
//.........这里部分代码省略.........
开发者ID:rldleblanc,项目名称:linux,代码行数:101,代码来源:ip6_output.c
示例6: _decode_session6
static inline void
_decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
{
int onlyproto = 0;
u16 offset = skb_network_header_len(skb);
struct ipv6hdr *hdr = ipv6_hdr(skb);
struct ipv6_opt_hdr *exthdr;
const unsigned char *nh = skb_network_header(skb);
u8 nexthdr = nh[IP6CB(skb)->nhoff];
memset(fl, 0, sizeof(struct flowi));
ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
while (nh + offset + 1 < skb->data ||
pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
nh = skb_network_header(skb);
exthdr = (struct ipv6_opt_hdr *)(nh + offset);
switch (nexthdr) {
case NEXTHDR_FRAGMENT:
onlyproto = 1;
case NEXTHDR_ROUTING:
case NEXTHDR_HOP:
case NEXTHDR_DEST:
offset += ipv6_optlen(exthdr);
nexthdr = exthdr->nexthdr;
exthdr = (struct ipv6_opt_hdr *)(nh + offset);
break;
case IPPROTO_UDP:
case IPPROTO_UDPLITE:
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
if (!onlyproto && (nh + offset + 4 < skb->data ||
pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
__be16 *ports = (__be16 *)exthdr;
fl->fl_ip_sport = ports[!!reverse];
fl->fl_ip_dport = ports[!reverse];
}
fl->proto = nexthdr;
return;
case IPPROTO_ICMPV6:
if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) {
u8 *icmp = (u8 *)exthdr;
fl->fl_icmp_type = icmp[0];
fl->fl_icmp_code = icmp[1];
}
fl->proto = nexthdr;
return;
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPPROTO_MH:
if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
struct ip6_mh *mh;
mh = (struct ip6_mh *)exthdr;
fl->fl_mh_type = mh->ip6mh_type;
}
fl->proto = nexthdr;
return;
#endif
/* XXX Why are there these headers? */
case IPPROTO_AH:
case IPPROTO_ESP:
case IPPROTO_COMP:
default:
fl->fl_ipsec_spi = 0;
fl->proto = nexthdr;
return;
}
}
}
开发者ID:325116067,项目名称:semc-qsd8x50,代码行数:78,代码来源:xfrm6_policy.c
示例7: ip6_input_finish
static int ip6_input_finish(struct sk_buff *skb)
{
struct net *net = dev_net(skb_dst(skb)->dev);
const struct inet6_protocol *ipprot;
struct inet6_dev *idev;
unsigned int nhoff;
int nexthdr;
bool raw;
/*
* Parse extension headers
*/
rcu_read_lock();
resubmit:
idev = ip6_dst_idev(skb_dst(skb));
if (!pskb_pull(skb, skb_transport_offset(skb)))
goto discard;
nhoff = IP6CB(skb)->nhoff;
nexthdr = skb_network_header(skb)[nhoff];
raw = raw6_local_deliver(skb, nexthdr);
if ((ipprot = rcu_dereference(inet6_protos[nexthdr])) != NULL) {
int ret;
if (ipprot->flags & INET6_PROTO_FINAL) {
const struct ipv6hdr *hdr;
/* Free reference early: we don't need it any more,
and it may hold ip_conntrack module loaded
indefinitely. */
nf_reset(skb);
skb_postpull_rcsum(skb, skb_network_header(skb),
skb_network_header_len(skb));
hdr = ipv6_hdr(skb);
if (ipv6_addr_is_multicast(&hdr->daddr) &&
!ipv6_chk_mcast_addr(skb->dev, &hdr->daddr,
&hdr->saddr) &&
!ipv6_is_mld(skb, nexthdr, skb_network_header_len(skb)))
goto discard;
}
if (!(ipprot->flags & INET6_PROTO_NOPOLICY) &&
!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
goto discard;
ret = ipprot->handler(skb);
if (ret > 0)
goto resubmit;
else if (ret == 0)
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDELIVERS);
} else {
if (!raw) {
if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
IP6_INC_STATS_BH(net, idev,
IPSTATS_MIB_INUNKNOWNPROTOS);
icmpv6_send(skb, ICMPV6_PARAMPROB,
ICMPV6_UNK_NEXTHDR, nhoff);
}
kfree_skb(skb);
} else {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDELIVERS);
consume_skb(skb);
}
}
rcu_read_unlock();
return 0;
discard:
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDISCARDS);
rcu_read_unlock();
kfree_skb(skb);
return 0;
}
开发者ID:Babel-builder,项目名称:linux,代码行数:74,代码来源:ip6_input.c
示例8: ipv6_rcv
int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
const struct ipv6hdr *hdr;
u32 pkt_len;
struct inet6_dev *idev;
struct net *net = dev_net(skb->dev);
if (skb->pkt_type == PACKET_OTHERHOST) {
kfree_skb(skb);
return NET_RX_DROP;
}
rcu_read_lock();
idev = __in6_dev_get(skb->dev);
IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_IN, skb->len);
if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
!idev || unlikely(idev->cnf.disable_ipv6)) {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDISCARDS);
goto drop;
}
memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));
/*
* Store incoming device index. When the packet will
* be queued, we cannot refer to skb->dev anymore.
*
* BTW, when we send a packet for our own local address on a
* non-loopback interface (e.g. ethX), it is being delivered
* via the loopback interface (lo) here; skb->dev = loopback_dev.
* It, however, should be considered as if it is being
* arrived via the sending interface (ethX), because of the
* nature of scoping architecture. --yoshfuji
*/
IP6CB(skb)->iif = skb_dst(skb) ? ip6_dst_idev(skb_dst(skb))->dev->ifindex : dev->ifindex;
if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
goto err;
hdr = ipv6_hdr(skb);
if (hdr->version != 6)
goto err;
/*
* RFC4291 2.5.3
* A packet received on an interface with a destination address
* of loopback must be dropped.
*/
if (!(dev->flags & IFF_LOOPBACK) &&
ipv6_addr_loopback(&hdr->daddr))
goto err;
/* RFC4291 2.7
* Nodes must not originate a packet to a multicast address whose scope
* field contains the reserved value 0; if such a packet is received, it
* must be silently dropped.
*/
if (ipv6_addr_is_multicast(&hdr->daddr) &&
IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0)
goto err;
/*
* RFC4291 2.7
* Multicast addresses must not be used as source addresses in IPv6
* packets or appear in any Routing header.
*/
if (ipv6_addr_is_multicast(&hdr->saddr))
goto err;
skb->transport_header = skb->network_header + sizeof(*hdr);
IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
pkt_len = ntohs(hdr->payload_len);
/* pkt_len may be zero if Jumbo payload option is present */
if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
IP6_INC_STATS_BH(net,
idev, IPSTATS_MIB_INTRUNCATEDPKTS);
goto drop;
}
if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
goto drop;
}
hdr = ipv6_hdr(skb);
}
if (hdr->nexthdr == NEXTHDR_HOP) {
if (ipv6_parse_hopopts(skb) < 0) {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
rcu_read_unlock();
return NET_RX_DROP;
}
}
//.........这里部分代码省略.........
开发者ID:Babel-builder,项目名称:linux,代码行数:101,代码来源:ip6_input.c
示例9: ipv6_frag_rcv
static int ipv6_frag_rcv(struct sk_buff *skb)
{
struct frag_hdr *fhdr;
struct frag_queue *fq;
const struct ipv6hdr *hdr = ipv6_hdr(skb);
struct net *net = dev_net(skb_dst(skb)->dev);
int evicted;
if (IP6CB(skb)->flags & IP6SKB_FRAGMENTED)
goto fail_hdr;
IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMREQDS);
/* Jumbo payload inhibits frag. header */
if (hdr->payload_len==0)
goto fail_hdr;
if (!pskb_may_pull(skb, (skb_transport_offset(skb) +
sizeof(struct frag_hdr))))
goto fail_hdr;
hdr = ipv6_hdr(skb);
fhdr = (struct frag_hdr *)skb_transport_header(skb);
if (!(fhdr->frag_off & htons(0xFFF9))) {
/* It is not a fragmented frame */
skb->transport_header += sizeof(struct frag_hdr);
IP6_INC_STATS_BH(net,
ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMOKS);
IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
IP6CB(skb)->flags |= IP6SKB_FRAGMENTED;
return 1;
}
evicted = inet_frag_evictor(&net->ipv6.frags, &ip6_frags, false);
if (evicted)
IP6_ADD_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
IPSTATS_MIB_REASMFAILS, evicted);
fq = fq_find(net, fhdr->identification, &hdr->saddr, &hdr->daddr,
ip6_frag_ecn(hdr));
if (fq != NULL) {
int ret;
spin_lock(&fq->q.lock);
ret = ip6_frag_queue(fq, skb, fhdr, IP6CB(skb)->nhoff);
spin_unlock(&fq->q.lock);
inet_frag_put(&fq->q, &ip6_frags);
return ret;
}
IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMFAILS);
kfree_skb(skb);
return -1;
fail_hdr:
IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INHDRERRORS);
icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, skb_network_header_len(skb));
return -1;
}
开发者ID:7799,项目名称:linux,代码行数:63,代码来源:reassembly.c
示例10: _decode_session6
static inline void
_decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
{
struct flowi6 *fl6 = &fl->u.ip6;
int onlyproto = 0;
const struct ipv6hdr *hdr = ipv6_hdr(skb);
u16 offset = sizeof(*hdr);
struct ipv6_opt_hdr *exthdr;
const unsigned char *nh = skb_network_header(skb);
u16 nhoff = IP6CB(skb)->nhoff;
int oif = 0;
u8 nexthdr;
if (!nhoff)
nhoff = offsetof(struct ipv6hdr, nexthdr);
nexthdr = nh[nhoff];
if (skb_dst(skb))
oif = skb_dst(skb)->dev->ifindex;
memset(fl6, 0, sizeof(struct flowi6));
fl6->flowi6_mark = skb->mark;
fl6->flowi6_oif = reverse ? skb->skb_iif : oif;
fl6->daddr = reverse ? hdr->saddr : hdr->daddr;
fl6->saddr = reverse ? hdr->daddr : hdr->saddr;
while (nh + offset + 1 < skb->data ||
pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
nh = skb_network_header(skb);
exthdr = (struct ipv6_opt_hdr *)(nh + offset);
switch (nexthdr) {
case NEXTHDR_FRAGMENT:
onlyproto = 1;
case NEXTHDR_ROUTING:
case NEXTHDR_HOP:
case NEXTHDR_DEST:
offset += ipv6_optlen(exthdr);
nexthdr = exthdr->nexthdr;
exthdr = (struct ipv6_opt_hdr *)(nh + offset);
break;
case IPPROTO_UDP:
case IPPROTO_UDPLITE:
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
if (!onlyproto && (nh + offset + 4 < skb->data ||
pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
__be16 *ports;
nh = skb_network_header(skb);
ports = (__be16 *)(nh + offset);
fl6->fl6_sport = ports[!!reverse];
fl6->fl6_dport = ports[!reverse];
}
fl6->flowi6_proto = nexthdr;
return;
case IPPROTO_ICMPV6:
if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) {
u8 *icmp;
nh = skb_network_header(skb);
icmp = (u8 *)(nh + offset);
fl6->fl6_icmp_type = icmp[0];
fl6->fl6_icmp_code = icmp[1];
}
fl6->flowi6_proto = nexthdr;
return;
#if IS_ENABLED(CONFIG_IPV6_MIP6)
case IPPROTO_MH:
offset += ipv6_optlen(exthdr);
if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
struct ip6_mh *mh;
nh = skb_network_header(skb);
mh = (struct ip6_mh *)(nh + offset);
fl6->fl6_mh_type = mh->ip6mh_type;
}
fl6->flowi6_proto = nexthdr;
return;
#endif
/* XXX Why are there these headers? */
case IPPROTO_AH:
case IPPROTO_ESP:
case IPPROTO_COMP:
default:
fl6->fl6_ipsec_spi = 0;
fl6->flowi6_proto = nexthdr;
return;
}
}
}
开发者ID:19Dan01,项目名称:linux,代码行数:98,代码来源:xfrm6_policy.c
示例11: xfrm6_rcv_spi
int xfrm6_rcv_spi(struct sk_buff *skb, __be32 spi)
{
int err;
__be32 seq;
struct xfrm_state *xfrm_vec[XFRM_MAX_DEPTH];
struct xfrm_state *x;
int xfrm_nr = 0;
int decaps = 0;
int nexthdr;
unsigned int nhoff;
nhoff = IP6CB(skb)->nhoff;
nexthdr = skb->nh.raw[nhoff];
seq = 0;
if (!spi && (err = xfrm_parse_spi(skb, nexthdr, &spi, &seq)) != 0)
goto drop;
do {
struct ipv6hdr *iph = skb->nh.ipv6h;
if (xfrm_nr == XFRM_MAX_DEPTH)
goto drop;
x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi,
nexthdr != IPPROTO_IPIP ? nexthdr : IPPROTO_IPV6, AF_INET6);
if (x == NULL)
goto drop;
spin_lock(&x->lock);
if (unlikely(x->km.state != XFRM_STATE_VALID))
goto drop_unlock;
if (x->props.replay_window && xfrm_replay_check(x, seq))
goto drop_unlock;
if (xfrm_state_check_expire(x))
goto drop_unlock;
nexthdr = x->type->input(x, skb);
if (nexthdr <= 0)
goto drop_unlock;
skb->nh.raw[nhoff] = nexthdr;
if (x->props.replay_window)
xfrm_replay_advance(x, seq);
x->curlft.bytes += skb->len;
x->curlft.packets++;
spin_unlock(&x->lock);
xfrm_vec[xfrm_nr++] = x;
if (x->mode->input(x, skb))
goto drop;
if (x->props.mode == XFRM_MODE_TUNNEL) { /* XXX */
decaps = 1;
break;
}
if ((err = xfrm_parse_spi(skb, nexthdr, &spi, &seq)) < 0)
goto drop;
} while (!err);
/* Allocate new secpath or COW existing one. */
if (!skb->sp || atomic_read(&skb->sp->refcnt) != 1) {
struct sec_path *sp;
sp = secpath_dup(skb->sp);
if (!sp)
goto drop;
if (skb->sp)
secpath_put(skb->sp);
skb->sp = sp;
}
if (xfrm_nr + skb->sp->len > XFRM_MAX_DEPTH)
goto drop;
memcpy(skb->sp->xvec + skb->sp->len, xfrm_vec,
xfrm_nr * sizeof(xfrm_vec[0]));
skb->sp->len += xfrm_nr;
skb->ip_summed = CHECKSUM_NONE;
nf_reset(skb);
if (decaps) {
dst_release(skb->dst);
skb->dst = NULL;
netif_rx(skb);
return -1;
} else {
#ifdef CONFIG_NETFILTER
skb->nh.ipv6h->payload_len = htons(skb->len);
__skb_push(skb, skb->data - skb->nh.raw);
NF_HOOK(PF_INET6, NF_IP6_PRE_ROUTING, skb, skb->dev, NULL,
ip6_rcv_finish);
return -1;
//.........这里部分代码省略.........
开发者ID:jameshilliard,项目名称:actiontec_opensrc_mi424wr-rev-i_fw-50-0-16-6-2,代码行数:101,代码来源:xfrm6_input.c
示例12: br_nf_dev_queue_xmit
static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff *skb)
{
struct nf_bridge_info *nf_bridge;
unsigned int mtu_reserved;
mtu_reserved = nf_bridge_mtu_reduction(skb);
if (skb_is_gso(skb) || skb->len + mtu_reserved <= skb->dev->mtu) {
nf_bridge_info_free(skb);
return br_dev_queue_push_xmit(net, sk, skb);
}
nf_bridge = nf_bridge_info_get(skb);
/* This is wrong! We should preserve the original fragment
* boundaries by preserving frag_list rather than refragmenting.
*/
if (IS_ENABLED(CONFIG_NF_DEFRAG_IPV4) &&
skb->protocol == htons(ETH_P_IP)) {
struct brnf_frag_data *data;
if (br_validate_ipv4(net, skb))
goto drop;
IPCB(skb)->frag_max_size = nf_bridge->frag_max_size;
nf_bridge_update_protocol(skb);
data = this_cpu_ptr(&brnf_frag_data_storage);
data->vlan_tci = skb->vlan_tci;
data->vlan_proto = skb->vlan_proto;
data->encap_size = nf_bridge_encap_header_len(skb);
data->size = ETH_HLEN + data->encap_size;
skb_copy_from_linear_data_offset(skb, -data->size, data->mac,
data->size);
return br_nf_ip_fragment(net, sk, skb, br_nf_push_frag_xmit);
}
if (IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) &&
skb->protocol == htons(ETH_P_IPV6)) {
const struct nf_ipv6_ops *v6ops = nf_get_ipv6_ops();
struct brnf_frag_data *data;
if (br_validate_ipv6(net, skb))
goto drop;
IP6CB(skb)->frag_max_size = nf_bridge->frag_max_size;
nf_bridge_update_protocol(skb);
data = this_cpu_ptr(&brnf_frag_data_storage);
data->encap_size = nf_bridge_encap_header_len(skb);
data->size = ETH_HLEN + data->encap_size;
skb_copy_from_linear_data_offset(skb, -data->size, data->mac,
data->size);
if (v6ops)
return v6ops->fragment(net, sk, skb, br_nf_push_frag_xmit);
kfree_skb(skb);
return -EMSGSIZE;
}
nf_bridge_info_free(skb);
return br_dev_queue_push_xmit(net, sk, skb);
drop:
kfree_skb(skb);
return 0;
}
开发者ID:branderxero,项目名称:linux,代码行数:71,代码来源:br_netfilter_hooks.c
示例13: br_nf_forward_ip
/* This is the 'purely bridged' case. For IP, we pass the packet to
* netfilter with indev and outdev set to the bridge device,
* but we are still able to filter on the 'real' indev/outdev
* because of the physdev module. For ARP, indev and outdev are the
* bridge ports. */
static unsigned int br_nf_forward_ip(void *priv,
struct sk_buff *skb,
const struct nf_hook_state *state)
{
struct nf_bridge_info *nf_bridge;
struct net_device *parent;
u_int8_t pf;
if (!skb->nf_bridge)
return NF_ACCEPT;
/* Need exclusive nf_bridge_info since we might have multiple
* different physoutdevs. */
if (!nf_bridge_unshare(skb))
return NF_DROP;
nf_bridge = nf_bridge_info_get(skb);
if (!nf_bridge)
return NF_DROP;
parent = bridge_parent(state->out);
if (!parent)
return NF_DROP;
if (IS_IP(skb) || IS_VLAN_IP(skb) || IS_PPPOE_IP(skb))
pf = NFPROTO_IPV4;
else if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb))
pf = NFPROTO_IPV6;
else
return NF_ACCEPT;
nf_bridge_pull_encap_header(skb);
if (skb->pkt_type == PACKET_OTHERHOST) {
skb->pkt_type = PACKET_HOST;
nf_bridge->pkt_otherhost = true;
}
if (pf == NFPROTO_IPV4) {
if (br_validate_ipv4(state->net, skb))
return NF_DROP;
IPCB(skb)->frag_max_size = nf_bridge->frag_max_size;
}
if (pf == NFPROTO_IPV6) {
if (br_validate_ipv6(state->net, skb))
return NF_DROP;
IP6CB(skb)->frag_max_size = nf_bridge->frag_max_size;
}
nf_bridge->physoutdev = skb->dev;
if (pf == NFPROTO_IPV4)
skb->protocol = htons(ETH_P_IP);
else
skb->protocol = htons(ETH_P_IPV6);
NF_HOOK(pf, NF_INET_FORWARD, state->net, NULL, skb,
brnf_get_logical_dev(skb, state->in),
parent, br_nf_forward_finish);
return NF_STOLEN;
}
开发者ID:branderxero,项目名称:linux,代码行数:67,代码来源:br_netfilter_hooks.c
示例14: vrf_ip6_input_dst
static void vrf_ip6_input_dst(struct sk_buff *skb, struct net_device *vrf_dev,
int ifindex)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
struct flowi6 fl6 = {
.daddr = iph->daddr,
.saddr = iph->saddr,
.flowlabel = ip6_flowinfo(iph),
.flowi6_mark = skb->mark,
.flowi6_proto = iph->nexthdr,
.flowi6_iif = ifindex,
};
struct net *net = dev_net(vrf_dev);
struct rt6_info *rt6;
rt6 = vrf_ip6_route_lookup(net, vrf_dev, &fl6, ifindex,
RT6_LOOKUP_F_HAS_SADDR | RT6_LOOKUP_F_IFACE);
if (unlikely(!rt6))
return;
if (unlikely(&rt6->dst == &net->ipv6.ip6_null_entry->dst))
return;
skb_dst_set(skb, &rt6->dst);
}
static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
int orig_iif = skb->skb_iif;
bool need_strict;
/* loopback traffic; do not push through packet taps again.
* Reset pkt_type for upper layers to process skb
*/
if (skb->pkt_type == PACKET_LOOPBACK) {
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
skb->pkt_type = PACKET_HOST;
goto out;
}
/* if packet is NDISC or addressed to multicast or link-local
* then keep the ingress interface
*/
need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
if (!ipv6_ndisc_frame(skb) && !need_strict) {
vrf_rx_stats(vrf_dev, skb->len);
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
skb_push(skb, skb->mac_len);
dev_queue_xmit_nit(skb, vrf_dev);
skb_pull(skb, skb->mac_len);
IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
}
if (need_strict)
vrf_ip6_input_dst(skb, vrf_dev, orig_iif);
skb = vrf_rcv_nfhook(NFPROTO_IPV6, NF_INET_PRE_ROUTING, skb, vrf_dev);
out:
return skb;
}
开发者ID:AshishNamdev,项目名称:linux,代码行数:66,代码来源:vrf.c
示例15: kfree_skb
static struct sk_buff *ip6_rcv_core(struct sk_buff *skb, struct net_device *dev,
struct net *net)
{
const struct ipv6hdr *hdr;
u32 pkt_len;
struct inet6_dev *idev;
if (skb->pkt_type == PACKET_OTHERHOST) {
kfree_skb(skb);
return NULL;
}
rcu_read_lock();
idev = __in6_dev_get(skb->dev);
__IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_IN, skb->len);
if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
!idev || unlikely(idev->cnf.disable_ipv6)) {
__IP6_INC_STATS(net, idev, IPSTATS_MIB_INDISCARDS);
goto drop;
}
memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));
/*
* Store incoming device index. When the packet will
* be queued, we cannot refer to skb->dev anymore.
*
* BTW, when we send a packet for our own local address on a
* non-loopback interface (e.g. ethX), it is being delivered
* via the loopback interface (lo) here; skb->dev = loopback_dev.
* It, however, should be considered as if it is being
* arrived via the sending interface (ethX), because of the
* nature of scoping architecture. --yoshfuji
*/
IP6CB(skb)->iif = skb_valid_dst(skb) ? ip6_dst_idev(skb_dst(skb))->dev->ifindex : dev->ifindex;
if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
goto err;
hdr = ipv6_hdr(skb);
if (hdr->version != 6)
goto err;
__IP6_ADD_STATS(net, idev,
IPSTATS_MIB_NOECTPKTS +
(ipv6_get_dsfield(hdr) & INET_ECN_MASK),
max_t(unsigned short, 1, skb_shinfo(skb)->gso_segs));
/*
* RFC4291 2.5.3
* The loopback address must not be used as the source address in IPv6
* packets that are sent outside of a single node. [..]
* A packet received on an interface with a destination address
* of loopback must be dropped.
*/
if ((ipv6_addr_loopback(&hdr->saddr) ||
ipv6_addr_loopback(&hdr->daddr)) &&
!(dev->flags & IFF_LOOPBACK) &&
!netif_is_l3_master(dev))
goto err;
/* RFC4291 Errata ID: 3480
* Interface-Local scope spans only a single interface on a
* node and is useful only for loopback transmission of
* multicast. Packets with interface-local scope received
* from another node must be discarded.
*/
if (!(skb->pkt_type == PACKET_LOOPBACK ||
dev->flags & IFF_LOOPBACK) &&
ipv6_addr_is_multicast(&hdr->daddr) &&
IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1)
goto err;
/* If enabled, drop unicast packets that were encapsulated in link-layer
* multicast or broadcast to protected against the so-called "hole-196"
* attack in 802.11 wireless.
*/
if (!ipv6_addr_is_multicast(&hdr->daddr) &&
(skb->pkt_type == PACKET_BROADCAST ||
skb->pkt_type == PACKET_MULTICAST) &&
idev->cnf.drop_unicast_in_l2_multicast)
goto err;
/* RFC4291 2.7
* Nodes must not originate a packet to a multicast address whose scope
* field contains the reserved value 0; if such a packet is received, it
* must be silently dropped.
*/
if (ipv6_addr_is_multicast(&hdr->daddr) &&
IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0)
goto err;
/*
* RFC4291 2.7
* Multicast addresses must not be used as source addresses in IPv6
* packets or appear in any Routing header.
*/
//.........这里部分代码省略.........
开发者ID:avagin,项目名称:linux,代码行数:101,代码来源:ip6_input.c
示例16: dccp_v6_conn_request
static int dccp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
{
struct request_sock *req;
struct dccp_request_sock *dreq;
struct inet_request_sock *ireq;
struct ipv6_pinfo *np = inet6_sk(sk);
const __be32 service = dccp_hdr_request(skb)->dccph_req_service;
struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
if (skb->protocol == htons(ETH_P_IP))
return dccp_v4_conn_request(sk, skb);
if (!ipv6_unicast_destination(skb))
return 0; /* discard, don't send a reset here */
if (dccp_bad_service_code(sk, service)) {
dcb->dccpd_reset_code = DCCP_RESET_CODE_BAD_SERVICE_CODE;
goto drop;
}
/*
* There are no SYN attacks on IPv6, yet...
*/
dcb->dccpd_reset_code = DCCP_RESET_CODE_TOO_BUSY;
if (inet_csk_reqsk_queue_is_full(sk))
goto drop;
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
req = inet_reqsk_alloc(&dccp6_request_sock_ops, sk, true);
if (req == NULL)
goto drop;
if (dccp_reqsk_init(req, dccp_sk(sk), skb))
goto drop_and_free;
dreq = dccp_rsk(req);
if (dccp_parse_options(sk, dreq, skb))
goto drop_and_free;
if (security_inet_conn_request(sk, skb, req))
goto drop_and_free;
ireq = inet_rsk(req);
ireq->ir_v6_rmt_addr = ipv6_hdr(skb)->saddr;
ireq->ir_v6_loc_addr = ipv6_hdr(skb)->daddr;
ireq->ireq_family = AF_INET6;
if (ipv6_opt_accepted(sk, skb, IP6CB(skb)) ||
np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo ||
np->rxopt.bits.rxhlim || np->rxopt.bits.rxohlim) {
atomic_inc(&skb->users);
ireq->pktopts = skb;
}
ireq->ir_iif = sk->sk_bound_dev_if;
/* So that link locals have meaning */
if (!sk->sk_bound_dev_if &&
ipv6_addr_type(&ireq->ir_v6_rmt_addr) & IPV6_ADDR_LINKLOCAL)
ireq->ir_iif = inet6_iif(skb);
/*
* Step 3: Process LISTEN state
*
* Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init Cookie
*
* Setting S.SWL/S.SWH to is deferred to dccp_create_openreq_child().
*/
dreq->dreq_isr = dcb->dccpd_seq;
dreq->dreq_gsr = dreq->dreq_isr;
dreq->dreq_iss = dccp_v6_init_sequence(skb);
dreq->dreq_gss = dreq->dreq_iss;
dreq->dreq_service = service;
if (dccp_v6_send_response(sk, req))
goto drop_and_free;
inet_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
return 0;
drop_and_free:
reqsk_free(req);
drop:
__DCCP_INC_STATS(DCCP_MIB_ATTEMPTFAILS);
return -1;
}
开发者ID:513855417,项目名称:linux,代码行数:86,代码来源:ipv6.c
示例17: ip6_protocol_deliver_rcu
/*
* Deliver the packet to the host
*/
void ip6_protocol_deliver_rcu(struct net *net, struct sk_buff *skb, int nexthdr,
bool have_final)
{
const struct inet6_protocol *ipprot;
struct inet6_dev *idev;
unsigned int nhoff;
bool raw;
/*
* Parse extension headers
*/
resubmit:
idev = ip6_dst_idev(skb_dst(skb));
nhoff = IP6CB(skb)->nhoff;
if (!have_final) {
if (!pskb_pull(skb, skb_transport_offset(skb)))
goto discard;
nexthdr = skb_network_header(skb)[nhoff];
}
resubmit_final:
raw = raw6_local_deliver(skb, nexthdr);
ipprot = rcu_dereference(inet6_protos[nexthdr]);
if (ipprot) {
int ret;
if (have_final) {
if (!(ipprot->flags & INET6_PROTO_FINAL)) {
/* Once we've seen a final protocol don't
* allow encapsulation on any non-final
* ones. This allows foo in UDP encapsulation
* to work.
*/
goto discard;
}
} else if (ipprot->flags & INET6_PROTO_FINAL) {
const struct ipv6hdr *hdr;
int sdif = inet6_sdif(skb);
struct net_device *dev;
/* Only do this once for first final protocol */
have_final = true;
/* Free reference early: we don't need it any more,
and it may hold ip_conntrack module loaded
indefinitely. */
nf_reset(skb);
skb_postpull_rcsum(skb, skb_network_header(skb),
skb_network_header_len(skb));
hdr = ipv6_hdr(skb);
/* skb->dev passed may be master dev for vrfs. */
if (sdif) {
dev = dev_get_by_index_rcu(net, sdif);
if (!dev)
goto discard;
} else {
dev = skb->dev;
}
if (ipv6_addr_is_multicast(&hdr->daddr) &&
!ipv6_chk_mcast_addr(dev, &hdr->daddr,
&hdr->saddr) &&
!ipv6_is_mld(skb, nexthdr, skb_network_header_len(skb)))
goto discard;
}
if (!(ipprot->flags & INET6_PROTO_NOPOLICY) &&
!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
goto discard;
ret = INDIRECT_CALL_2(ipprot->handler, tcp_v6_rcv, udpv6_rcv,
skb);
if
|
请发表评论