• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ IN_SET函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中IN_SET函数的典型用法代码示例。如果您正苦于以下问题:C++ IN_SET函数的具体用法?C++ IN_SET怎么用?C++ IN_SET使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了IN_SET函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: prepend_component

static int prepend_component(const char **p, bool usec, unsigned nesting, CalendarComponent **c) {
        int r, start, stop = -1, repeat = 0;
        CalendarComponent *cc;
        const char *e = *p;

        assert(p);
        assert(c);

        if (nesting > CALENDARSPEC_COMPONENTS_MAX)
                return -ENOBUFS;

        r = parse_component_decimal(&e, usec, &start);
        if (r < 0)
                return r;

        if (e[0] == '.' && e[1] == '.') {
                e += 2;
                r = parse_component_decimal(&e, usec, &stop);
                if (r < 0)
                        return r;

                repeat = usec ? USEC_PER_SEC : 1;
        }

        if (*e == '/') {
                e++;
                r = parse_component_decimal(&e, usec, &repeat);
                if (r < 0)
                        return r;

                if (repeat == 0)
                        return -ERANGE;
        }

        if (!IN_SET(*e, 0, ' ', ',', '-', '~', ':'))
                return -EINVAL;

        cc = new0(CalendarComponent, 1);
        if (!cc)
                return -ENOMEM;

        cc->start = start;
        cc->stop = stop;
        cc->repeat = repeat;
        cc->next = *c;

        *p = e;
        *c = cc;

        if (*e ==',') {
                *p += 1;
                return prepend_component(p, usec, nesting + 1, c);
        }

        return 0;
}
开发者ID:Keruspe,项目名称:systemd,代码行数:56,代码来源:calendarspec.c


示例2: frame_callback

static int frame_callback(Dwfl_Frame *frame, void *userdata) {
        struct stack_context *c = userdata;
        Dwarf_Addr pc, pc_adjusted, bias = 0;
        _cleanup_free_ Dwarf_Die *scopes = NULL;
        const char *fname = NULL, *symbol = NULL;
        Dwfl_Module *module;
        bool is_activation;

        assert(frame);
        assert(c);

        if (c->n_frame >= FRAMES_MAX)
                return DWARF_CB_ABORT;

        if (!dwfl_frame_pc(frame, &pc, &is_activation))
                return DWARF_CB_ABORT;

        pc_adjusted = pc - (is_activation ? 0 : 1);

        module = dwfl_addrmodule(c->dwfl, pc_adjusted);
        if (module) {
                Dwarf_Die *s, *cudie;
                int n;

                cudie = dwfl_module_addrdie(module, pc_adjusted, &bias);
                if (cudie) {
                        n = dwarf_getscopes(cudie, pc_adjusted - bias, &scopes);
                        for (s = scopes; s < scopes + n; s++) {
                                if (IN_SET(dwarf_tag(s), DW_TAG_subprogram, DW_TAG_inlined_subroutine, DW_TAG_entry_point)) {
                                        Dwarf_Attribute *a, space;

                                        a = dwarf_attr_integrate(s, DW_AT_MIPS_linkage_name, &space);
                                        if (!a)
                                                a = dwarf_attr_integrate(s, DW_AT_linkage_name, &space);
                                        if (a)
                                                symbol = dwarf_formstring(a);
                                        if (!symbol)
                                                symbol = dwarf_diename(s);

                                        if (symbol)
                                                break;
                                }
                        }
                }

                if (!symbol)
                        symbol = dwfl_module_addrname(module, pc_adjusted);

                fname = dwfl_module_info(module, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
        }

        fprintf(c->f, "#%-2u 0x%016" PRIx64 " %s (%s)\n", c->n_frame, (uint64_t) pc, strna(symbol), strna(fname));
        c->n_frame++;

        return DWARF_CB_OK;
}
开发者ID:OpenDZ,项目名称:systemd,代码行数:56,代码来源:stacktrace.c


示例3: builtin_uaccess

static int builtin_uaccess(sd_device *dev, int argc, char *argv[], bool test) {
        const char *path = NULL, *seat;
        bool changed_acl = false;
        uid_t uid;
        int r;

        umask(0022);

        /* don't muck around with ACLs when the system is not running systemd */
        if (!logind_running())
                return 0;

        r = sd_device_get_devname(dev, &path);
        if (r < 0) {
                log_device_error_errno(dev, r, "Failed to get device name: %m");
                goto finish;
        }

        if (sd_device_get_property_value(dev, "ID_SEAT", &seat) < 0)
                seat = "seat0";

        r = sd_seat_get_active(seat, NULL, &uid);
        if (r < 0) {
                if (IN_SET(r, -ENXIO, -ENODATA))
                        /* No active session on this seat */
                        r = 0;
                else
                        log_device_error_errno(dev, r, "Failed to determine active user on seat %s: %m", seat);

                goto finish;
        }

        r = devnode_acl(path, true, false, 0, true, uid);
        if (r < 0) {
                log_device_full(dev, r == -ENOENT ? LOG_DEBUG : LOG_ERR, r, "Failed to apply ACL: %m");
                goto finish;
        }

        changed_acl = true;
        r = 0;

finish:
        if (path && !changed_acl) {
                int k;

                /* Better be safe than sorry and reset ACL */
                k = devnode_acl(path, true, false, 0, false, 0);
                if (k < 0) {
                        log_device_full(dev, k == -ENOENT ? LOG_DEBUG : LOG_ERR, k, "Failed to apply ACL: %m");
                        if (r >= 0)
                                r = k;
                }
        }

        return r;
}
开发者ID:Keruspe,项目名称:systemd,代码行数:56,代码来源:udev-builtin-uaccess.c


示例4: calendar_spec_to_string

int calendar_spec_to_string(const CalendarSpec *c, char **p) {
        char *buf = NULL;
        size_t sz = 0;
        FILE *f;
        int r;

        assert(c);
        assert(p);

        f = open_memstream(&buf, &sz);
        if (!f)
                return -ENOMEM;

        if (c->weekdays_bits > 0 && c->weekdays_bits <= BITS_WEEKDAYS) {
                format_weekdays(f, c);
                fputc(' ', f);
        }

        format_chain(f, 4, c->year, false);
        fputc('-', f);
        format_chain(f, 2, c->month, false);
        fputc(c->end_of_month ? '~' : '-', f);
        format_chain(f, 2, c->day, false);
        fputc(' ', f);
        format_chain(f, 2, c->hour, false);
        fputc(':', f);
        format_chain(f, 2, c->minute, false);
        fputc(':', f);
        format_chain(f, 2, c->microsecond, true);

        if (c->utc)
                fputs(" UTC", f);
        else if (IN_SET(c->dst, 0, 1)) {

                /* If daylight saving is explicitly on or off, let's show the used timezone. */

                tzset();

                if (!isempty(tzname[c->dst])) {
                        fputc(' ', f);
                        fputs(tzname[c->dst], f);
                }
        }

        r = fflush_and_check(f);
        if (r < 0) {
                free(buf);
                fclose(f);
                return r;
        }

        fclose(f);

        *p = buf;
        return 0;
}
开发者ID:tsmock,项目名称:systemd,代码行数:56,代码来源:calendarspec.c


示例5: busname_start

static int busname_start(Unit *u) {
        BusName *n = BUSNAME(u);
        int r;

        assert(n);

        /* We cannot fulfill this request right now, try again later
         * please! */
        if (IN_SET(n->state, BUSNAME_SIGTERM, BUSNAME_SIGKILL))
                return -EAGAIN;

        /* Already on it! */
        if (n->state == BUSNAME_MAKING)
                return 0;

        if (n->activating && UNIT_ISSET(n->service)) {
                Service *service;

                service = SERVICE(UNIT_DEREF(n->service));

                if (UNIT(service)->load_state != UNIT_LOADED) {
                        log_unit_error(u, "Bus service %s not loaded, refusing.", UNIT(service)->id);
                        return -ENOENT;
                }
        }

        assert(IN_SET(n->state, BUSNAME_DEAD, BUSNAME_FAILED));

        r = unit_start_limit_test(u);
        if (r < 0) {
                busname_enter_dead(n, BUSNAME_FAILURE_START_LIMIT_HIT);
                return r;
        }

        r = unit_acquire_invocation_id(u);
        if (r < 0)
                return r;

        n->result = BUSNAME_SUCCESS;
        busname_enter_making(n);

        return 1;
}
开发者ID:aulanov,项目名称:systemd,代码行数:43,代码来源:busname.c


示例6: dns_type_is_valid_rr

bool dns_type_is_valid_rr(uint16_t type) {

        /* The types valid as RR in packets (but not necessarily
         * stored on servers). */

        return !IN_SET(type,
                       DNS_TYPE_ANY,
                       DNS_TYPE_AXFR,
                       DNS_TYPE_IXFR);
}
开发者ID:alkino,项目名称:systemd,代码行数:10,代码来源:dns-type.c


示例7: dns_type_is_valid_query

bool dns_type_is_valid_query(uint16_t type) {

        /* The types valid as questions in packets */

        return !IN_SET(type,
                       0,
                       DNS_TYPE_OPT,
                       DNS_TYPE_TSIG,
                       DNS_TYPE_TKEY);
}
开发者ID:alkino,项目名称:systemd,代码行数:10,代码来源:dns-type.c


示例8: sd_ipv4ll_set_index

int sd_ipv4ll_set_index(sd_ipv4ll *ll, int interface_index) {
    assert_return(ll, -EINVAL);
    assert_return(interface_index > 0, -EINVAL);
    assert_return(IN_SET(ll->state, IPV4LL_STATE_INIT,
                         IPV4LL_STATE_STOPPED), -EBUSY);

    ll->index = interface_index;

    return 0;
}
开发者ID:kreijack,项目名称:systemd,代码行数:10,代码来源:sd-ipv4ll.c


示例9: sd_dhcp_client_set_index

int sd_dhcp_client_set_index(sd_dhcp_client *client, int interface_index) {
        assert_return(client, -EINVAL);
        assert_return (IN_SET(client->state, DHCP_STATE_INIT,
                              DHCP_STATE_STOPPED), -EBUSY);
        assert_return(interface_index > 0, -EINVAL);

        client->index = interface_index;

        return 0;
}
开发者ID:kyoiora,项目名称:systemd,代码行数:10,代码来源:sd-dhcp-client.c


示例10: pppoe_send

static int pppoe_send(sd_pppoe *ppp, uint8_t code) {
        union sockaddr_union link = {
                .ll = {
                        .sll_family = AF_PACKET,
                        .sll_protocol = htons(ETH_P_PPP_DISC),
                        .sll_halen = ETH_ALEN,
                },
        };
        _cleanup_free_ struct pppoe_hdr *packet = NULL;
        int r;

        assert(ppp);
        assert(ppp->fd != -1);
        assert(IN_SET(code, PADI_CODE, PADR_CODE, PADT_CODE));

        link.ll.sll_ifindex = ppp->ifindex;
        if (code == PADI_CODE)
                memset(&link.ll.sll_addr, 0xff, ETH_ALEN);
        else
                memcpy(&link.ll.sll_addr, &ppp->peer_mac, ETH_ALEN);

        packet = malloc0(PPPOE_MAX_PACKET_SIZE);
        if (!packet)
                return -ENOMEM;

        packet->ver = 0x1;
        packet->type = 0x1;
        packet->code = code;
        if (code == PADT_CODE)
                packet->sid = ppp->session_id;

        /* Service-Name */
        pppoe_tag_append(packet, PPPOE_MAX_PACKET_SIZE, PTT_SRV_NAME,
                         ppp->service_name, ppp->service_name ? strlen(ppp->service_name) : 0);

        /* AC-Cookie */
        if (code == PADR_CODE && ppp->tags.cookie)
                pppoe_tag_append(packet, PPPOE_MAX_PACKET_SIZE, PTT_AC_COOKIE,
                                 ppp->tags.cookie, ppp->tags.cookie_len);

        /* Host-Uniq */
        if (code != PADT_CODE) {
                ppp->host_uniq = random_u64();

                pppoe_tag_append(packet, PPPOE_MAX_PACKET_SIZE, PTT_HOST_UNIQ,
                                 &ppp->host_uniq, sizeof(ppp->host_uniq));
        }

        r = sendto(ppp->fd, packet, sizeof(struct pppoe_hdr) + PPPOE_PACKET_LENGTH(packet),
                   0, &link.sa, sizeof(link.ll));
        if (r < 0)
                return -errno;

        return 0;
}
开发者ID:275288698,项目名称:systemd-ubuntu-with-dbus,代码行数:55,代码来源:sd-pppoe.c


示例11: test_in_set

static void test_in_set(void) {
        assert_se(IN_SET(1, 1));
        assert_se(IN_SET(1, 1, 2, 3, 4));
        assert_se(IN_SET(2, 1, 2, 3, 4));
        assert_se(IN_SET(3, 1, 2, 3, 4));
        assert_se(IN_SET(4, 1, 2, 3, 4));
        assert_se(!IN_SET(0, 1));
        assert_se(!IN_SET(0, 1, 2, 3, 4));
}
开发者ID:Hariprasathganesh,项目名称:testsysd,代码行数:9,代码来源:test-util.c


示例12: dirent_is_file_with_suffix

bool dirent_is_file_with_suffix(const struct dirent *de, const char *suffix) {
    assert(de);

    if (!IN_SET(de->d_type, DT_REG, DT_LNK, DT_UNKNOWN))
        return false;

    if (de->d_name[0] == '.')
        return false;

    return endswith(de->d_name, suffix);
}
开发者ID:CogumelosMaravilha,项目名称:systemd,代码行数:11,代码来源:dirent-util.c


示例13: dirent_is_file

bool dirent_is_file(const struct dirent *de) {
    assert(de);

    if (!IN_SET(de->d_type, DT_REG, DT_LNK, DT_UNKNOWN))
        return false;

    if (hidden_or_backup_file(de->d_name))
        return false;

    return true;
}
开发者ID:CogumelosMaravilha,项目名称:systemd,代码行数:11,代码来源:dirent-util.c


示例14: scope_set_state

static void scope_set_state(Scope *s, ScopeState state) {
        ScopeState old_state;
        assert(s);

        old_state = s->state;
        s->state = state;

        if (!IN_SET(state, SCOPE_STOP_SIGTERM, SCOPE_STOP_SIGKILL))
                s->timer_event_source = sd_event_source_unref(s->timer_event_source);

        if (IN_SET(state, SCOPE_DEAD, SCOPE_FAILED)) {
                unit_unwatch_all_pids(UNIT(s));
                unit_dequeue_rewatch_pids(UNIT(s));
        }

        if (state != old_state)
                log_debug("%s changed %s -> %s", UNIT(s)->id, scope_state_to_string(old_state), scope_state_to_string(state));

        unit_notify(UNIT(s), state_translation_table[old_state], state_translation_table[state], 0);
}
开发者ID:halfline,项目名称:systemd,代码行数:20,代码来源:scope.c


示例15: rmdir_one

static int rmdir_one(const char *prefix, const char *suffix) {
        char *p;

        p = strjoina(prefix, "/", suffix);
        if (rmdir(p) < 0) {
                if (!IN_SET(errno, ENOENT, ENOTEMPTY))
                        return log_error_errno(errno, "Failed to remove \"%s\": %m", p);
        } else
                log_info("Removed \"%s\".", p);

        return 0;
}
开发者ID:Rydoo42,项目名称:systemd,代码行数:12,代码来源:bootctl.c


示例16: test_bus_open

static int test_bus_open(void) {
        _cleanup_(sd_bus_flush_close_unrefp) sd_bus *bus = NULL;
        int r;

        r = sd_bus_open_user(&bus);
        if (IN_SET(r, -ECONNREFUSED, -ENOENT))
                return r;

        assert_se(r >= 0);
        printf("after open: refcount %u\n", REFCNT_GET(bus->n_ref));

        return 0;
}
开发者ID:Werkov,项目名称:systemd,代码行数:13,代码来源:test-bus-cleanup.c


示例17: exit_status_set_test

bool exit_status_set_test(ExitStatusSet *x, int code, int status) {

        if (exit_status_set_is_empty(x))
                return false;

        if (code == CLD_EXITED && set_contains(x->status, INT_TO_PTR(status)))
                return true;

        if (IN_SET(code, CLD_KILLED, CLD_DUMPED) && set_contains(x->signal, INT_TO_PTR(status)))
                return true;

        return false;
}
开发者ID:davide125,项目名称:systemd,代码行数:13,代码来源:exit-status.c


示例18: test_clock_is_localtime_system

/* Test with the real /etc/adjtime */
static void test_clock_is_localtime_system(void) {
        int r;
        r = clock_is_localtime(NULL);

        if (access("/etc/adjtime", F_OK) == 0) {
                log_info("/etc/adjtime exists, clock_is_localtime() == %i", r);
                /* if /etc/adjtime exists we expect some answer, no error or
                 * crash */
                assert_se(IN_SET(r, 0, 1));
        } else
                /* default is UTC if there is no /etc/adjtime */
                assert_se(r == 0);
}
开发者ID:Werkov,项目名称:systemd,代码行数:14,代码来源:test-clock.c


示例19: busname_stop

static int busname_stop(Unit *u) {
        BusName *n = BUSNAME(u);

        assert(n);

        /* Already on it */
        if (IN_SET(n->state, BUSNAME_SIGTERM, BUSNAME_SIGKILL))
                return 0;

        /* If there's already something running, we go directly into
         * kill mode. */

        if (n->state == BUSNAME_MAKING) {
                busname_enter_signal(n, BUSNAME_SIGTERM, BUSNAME_SUCCESS);
                return -EAGAIN;
        }

        assert(IN_SET(n->state, BUSNAME_REGISTERED, BUSNAME_LISTENING, BUSNAME_RUNNING));

        busname_enter_dead(n, BUSNAME_SUCCESS);
        return 1;
}
开发者ID:freedesktop-unofficial-mirror,项目名称:systemd__systemd,代码行数:22,代码来源:busname.c


示例20: busname_coldplug

static int busname_coldplug(Unit *u, Hashmap *deferred_work) {
        BusName *n = BUSNAME(u);
        int r;

        assert(n);
        assert(n->state == BUSNAME_DEAD);

        if (n->deserialized_state == n->state)
                return 0;

        if (IN_SET(n->deserialized_state, BUSNAME_MAKING, BUSNAME_SIGTERM, BUSNAME_SIGKILL)) {

                if (n->control_pid <= 0)
                        return -EBADMSG;

                r = unit_watch_pid(UNIT(n), n->control_pid);
                if (r < 0)
                        return r;

                r = busname_arm_timer(n);
                if (r < 0)
                        return r;
        }

        if (IN_SET(n->deserialized_state, BUSNAME_MAKING, BUSNAME_LISTENING, BUSNAME_REGISTERED, BUSNAME_RUNNING)) {
                r = busname_open_fd(n);
                if (r < 0)
                        return r;
        }

        if (n->deserialized_state == BUSNAME_LISTENING) {
                r = busname_watch_fd(n);
                if (r < 0)
                        return r;
        }

        busname_set_state(n, n->deserialized_state);
        return 0;
}
开发者ID:freedesktop-unofficial-mirror,项目名称:systemd__systemd,代码行数:39,代码来源:busname.c



注:本文中的IN_SET函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ IN_Shutdown函数代码示例发布时间:2022-05-30
下一篇:
C++ IN_ROOM函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap