本文整理汇总了C++中INTERNAL_SYSCALL_ERROR_P函数的典型用法代码示例。如果您正苦于以下问题:C++ INTERNAL_SYSCALL_ERROR_P函数的具体用法?C++ INTERNAL_SYSCALL_ERROR_P怎么用?C++ INTERNAL_SYSCALL_ERROR_P使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了INTERNAL_SYSCALL_ERROR_P函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: sched_setaffinity
int sched_setaffinity(pid_t pid, size_t cpusetsize, const cpu_set_t *cpuset)
{
size_t cnt;
if (unlikely (__kernel_cpumask_size == 0)) {
INTERNAL_SYSCALL_DECL (err);
int res;
size_t psize = 128;
void *p = alloca (psize);
while (res = INTERNAL_SYSCALL (sched_getaffinity, err, 3, getpid (),
psize, p),
INTERNAL_SYSCALL_ERROR_P (res, err)
&& INTERNAL_SYSCALL_ERRNO (res, err) == EINVAL)
p = extend_alloca (p, psize, 2 * psize);
if (res == 0 || INTERNAL_SYSCALL_ERROR_P (res, err)) {
__set_errno (INTERNAL_SYSCALL_ERRNO (res, err));
return -1;
}
__kernel_cpumask_size = res;
}
/* We now know the size of the kernel cpumask_t. Make sure the user
does not request to set a bit beyond that. */
for (cnt = __kernel_cpumask_size; cnt < cpusetsize; ++cnt)
if (((char *) cpuset)[cnt] != '\0') {
/* Found a nonzero byte. This means the user request cannot be
fulfilled. */
__set_errno (EINVAL);
return -1;
}
return INLINE_SYSCALL (sched_setaffinity, 3, pid, cpusetsize, cpuset);
}
开发者ID:anithag,项目名称:kleestr,代码行数:35,代码来源:sched_setaffinity.c
示例2: __feholdexcept
int
__feholdexcept (fenv_t *envp)
{
fenv_union_t u;
INTERNAL_SYSCALL_DECL (err);
int r;
/* Get the current state. */
r = INTERNAL_SYSCALL (prctl, err, 2, PR_GET_FPEXC, &u.l[0]);
if (INTERNAL_SYSCALL_ERROR_P (r, err))
return -1;
u.l[1] = fegetenv_register ();
*envp = u.fenv;
/* Clear everything except for the rounding mode and trapping to the
kernel. */
u.l[0] &= ~(PR_FP_EXC_DIV
| PR_FP_EXC_OVF
| PR_FP_EXC_UND
| PR_FP_EXC_RES
| PR_FP_EXC_INV);
u.l[1] &= SPEFSCR_FRMC | (SPEFSCR_ALL_EXCEPT_ENABLE & ~SPEFSCR_FINXE);
/* Put the new state in effect. */
fesetenv_register (u.l[1]);
r = INTERNAL_SYSCALL (prctl, err, 2, PR_SET_FPEXC,
u.l[0] | PR_FP_EXC_SW_ENABLE);
if (INTERNAL_SYSCALL_ERROR_P (r, err))
return -1;
return 0;
}
开发者ID:JamesLinus,项目名称:glibc-mips,代码行数:33,代码来源:feholdexcpt.c
示例3: fedisableexcept
int
fedisableexcept (int excepts)
{
int result = 0, pflags, r;
INTERNAL_SYSCALL_DECL (err);
r = INTERNAL_SYSCALL (prctl, err, 2, PR_GET_FPEXC, &pflags);
if (INTERNAL_SYSCALL_ERROR_P (r, err))
return -1;
/* Save old enable bits. */
result = __fexcepts_from_prctl (pflags);
pflags &= ~__fexcepts_to_prctl (excepts);
r = INTERNAL_SYSCALL (prctl, err, 2, PR_SET_FPEXC,
pflags | PR_FP_EXC_SW_ENABLE);
if (INTERNAL_SYSCALL_ERROR_P (r, err))
return -1;
/* If disabling signals for "inexact", also disable trapping to the
kernel. */
if ((excepts & FE_INEXACT) != 0)
{
unsigned long fpescr;
fpescr = fegetenv_register ();
fpescr &= ~SPEFSCR_FINXE;
fesetenv_register (fpescr);
}
return result;
}
开发者ID:riscv,项目名称:riscv-glibc,代码行数:32,代码来源:fedisblxcpt.c
示例4: do_sigwait
/* Return any pending signal or wait for one for the given time. */
static int
do_sigwait (const sigset_t *set, int *sig)
{
int ret;
#ifdef SIGCANCEL
sigset_t tmpset;
if (set != NULL
&& (__builtin_expect (__sigismember (set, SIGCANCEL), 0)
# ifdef SIGSETXID
|| __builtin_expect (__sigismember (set, SIGSETXID), 0)
# endif
))
{
/* Create a temporary mask without the bit for SIGCANCEL set. */
// We are not copying more than we have to.
memcpy (&tmpset, set, _NSIG / 8);
__sigdelset (&tmpset, SIGCANCEL);
# ifdef SIGSETXID
__sigdelset (&tmpset, SIGSETXID);
# endif
set = &tmpset;
}
#endif
/* XXX The size argument hopefully will have to be changed to the
real size of the user-level sigset_t. */
#ifdef INTERNAL_SYSCALL
INTERNAL_SYSCALL_DECL (err);
do
ret = INTERNAL_SYSCALL (rt_sigtimedwait, err, 4, set,
NULL, NULL, _NSIG / 8);
while (INTERNAL_SYSCALL_ERROR_P (ret, err)
&& INTERNAL_SYSCALL_ERRNO (ret, err) == EINTR);
if (! INTERNAL_SYSCALL_ERROR_P (ret, err))
{
*sig = ret;
ret = 0;
}
else
ret = INTERNAL_SYSCALL_ERRNO (ret, err);
#else
do
ret = INLINE_SYSCALL (rt_sigtimedwait, 4, set, NULL, NULL, _NSIG / 8);
while (ret == -1 && errno == EINTR);
if (ret != -1)
{
*sig = ret;
ret = 0;
}
else
ret = errno;
#endif
return ret;
}
开发者ID:bluecmd,项目名称:or1k-glibc,代码行数:57,代码来源:sigwait.c
示例5: __pthread_kill
int
__pthread_kill (
pthread_t threadid,
int signo)
{
struct pthread *pd = (struct pthread *) threadid;
/* Make sure the descriptor is valid. */
if (DEBUGGING_P && INVALID_TD_P (pd))
/* Not a valid thread handle. */
return ESRCH;
/* Force load of pd->tid into local variable or register. Otherwise
if a thread exits between ESRCH test and tgkill, we might return
EINVAL, because pd->tid would be cleared by the kernel. */
pid_t tid = atomic_forced_read (pd->tid);
if (__builtin_expect (tid <= 0, 0))
/* Not a valid thread handle. */
return ESRCH;
/* Disallow sending the signal we use for cancellation, timers, for
for the setxid implementation. */
if (signo == SIGCANCEL || signo == SIGTIMER || signo == SIGSETXID)
return EINVAL;
/* We have a special syscall to do the work. */
INTERNAL_SYSCALL_DECL (err);
/* One comment: The PID field in the TCB can temporarily be changed
(in fork). But this must not affect this code here. Since this
function would have to be called while the thread is executing
fork, it would have to happen in a signal handler. But this is
no allowed, pthread_kill is not guaranteed to be async-safe. */
int val;
#if defined(__ASSUME_TGKILL) && __ASSUME_TGKILL
val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid),
tid, signo);
#else
# ifdef __NR_tgkill
val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid),
tid, signo);
if (INTERNAL_SYSCALL_ERROR_P (val, err)
&& INTERNAL_SYSCALL_ERRNO (val, err) == ENOSYS)
# endif
val = INTERNAL_SYSCALL (tkill, err, 2, tid, signo);
#endif
return (INTERNAL_SYSCALL_ERROR_P (val, err)
? INTERNAL_SYSCALL_ERRNO (val, err) : 0);
}
开发者ID:JamesLinus,项目名称:uClibc-or1k,代码行数:50,代码来源:pthread_kill.c
示例6: posix_fallocate
/* Reserve storage for the data of the file associated with FD. */
int
posix_fallocate (int fd, __off_t offset, __off_t len)
{
#ifdef __NR_fallocate
# ifndef __ASSUME_FALLOCATE
if (__glibc_likely (__have_fallocate >= 0))
# endif
{
INTERNAL_SYSCALL_DECL (err);
# ifdef INTERNAL_SYSCALL_TYPES
int res = INTERNAL_SYSCALL_TYPES (fallocate, err, 4, int, fd,
int, 0, off_t, offset,
off_t, len);
# else
int res = INTERNAL_SYSCALL (fallocate, err, 4, fd, 0, offset, len);
# endif
if (! INTERNAL_SYSCALL_ERROR_P (res, err))
return 0;
# ifndef __ASSUME_FALLOCATE
if (__glibc_unlikely (INTERNAL_SYSCALL_ERRNO (res, err) == ENOSYS))
__have_fallocate = -1;
else
# endif
if (INTERNAL_SYSCALL_ERRNO (res, err) != EOPNOTSUPP)
return INTERNAL_SYSCALL_ERRNO (res, err);
}
开发者ID:JamesLinus,项目名称:glibc-mips,代码行数:29,代码来源:posix_fallocate.c
示例7: do_sigwait
/* Return any pending signal or wait for one for the given time. */
static __inline__ int
do_sigwait (const sigset_t *set, int *sig)
{
int ret;
/* XXX The size argument hopefully will have to be changed to the
real size of the user-level sigset_t. */
#ifdef INTERNAL_SYSCALL
INTERNAL_SYSCALL_DECL (err);
ret = INTERNAL_SYSCALL (rt_sigtimedwait, err, 4, set,
NULL, NULL, _NSIG / 8);
if (! INTERNAL_SYSCALL_ERROR_P (ret, err))
{
*sig = ret;
ret = 0;
}
else
ret = INTERNAL_SYSCALL_ERRNO (ret, err);
#else
ret = INLINE_SYSCALL (rt_sigtimedwait, 4, set,
NULL, NULL, _NSIG / 8);
if (ret != -1)
{
*sig = ret;
ret = 0;
}
else
ret = errno;
#endif
return ret;
}
开发者ID:Jaden-J,项目名称:uClibc,代码行数:33,代码来源:sigwait.c
示例8: posix_fadvise64
int posix_fadvise64(int fd, off64_t offset, off64_t len, int advice)
{
INTERNAL_SYSCALL_DECL (err);
/* ARM has always been funky. */
#if defined (__arm__) || \
(defined(__UCLIBC_SYSCALL_ALIGN_64BIT__) && (defined(__powerpc__) || defined(__xtensa__)))
/* arch with 64-bit data in even reg alignment #1: [powerpc/xtensa]
* custom syscall handler (rearranges @advice to avoid register hole punch) */
int ret = INTERNAL_SYSCALL (fadvise64_64, err, 6, fd, advice,
OFF64_HI_LO (offset), OFF64_HI_LO (len));
#elif defined(__UCLIBC_SYSCALL_ALIGN_64BIT__)
/* arch with 64-bit data in even reg alignment #2: [arcv2/others-in-future]
* stock syscall handler in kernel (reg hole punched) */
int ret = INTERNAL_SYSCALL (fadvise64_64, err, 7, fd, 0,
OFF64_HI_LO (offset), OFF64_HI_LO (len),
advice);
# else
int ret = INTERNAL_SYSCALL (fadvise64_64, err, 6, fd,
OFF64_HI_LO (offset), OFF64_HI_LO (len),
advice);
# endif
if (INTERNAL_SYSCALL_ERROR_P (ret, err))
return INTERNAL_SYSCALL_ERRNO (ret, err);
return 0;
}
开发者ID:Jaden-J,项目名称:uClibc,代码行数:25,代码来源:posix_fadvise64.c
示例9: pthread_sigmask
int
pthread_sigmask (int how, const sigset_t *newmask, sigset_t *oldmask)
{
sigset_t local_newmask;
/* The only thing we have to make sure here is that SIGCANCEL and
SIGSETXID is not blocked. */
if (newmask != NULL
&& (__builtin_expect (__sigismember (newmask, SIGCANCEL), 0)
|| __builtin_expect (__sigismember (newmask, SIGSETXID), 0)))
{
local_newmask = *newmask;
__sigdelset (&local_newmask, SIGCANCEL);
__sigdelset (&local_newmask, SIGSETXID);
newmask = &local_newmask;
}
#ifdef INTERNAL_SYSCALL
/* We know that realtime signals are available if NPTL is used. */
INTERNAL_SYSCALL_DECL (err);
int result = INTERNAL_SYSCALL (rt_sigprocmask, err, 4, how, newmask,
oldmask, _NSIG / 8);
return (INTERNAL_SYSCALL_ERROR_P (result, err)
? INTERNAL_SYSCALL_ERRNO (result, err)
: 0);
#else
return sigprocmask (how, newmask, oldmask) == -1 ? errno : 0;
#endif
}
开发者ID:JamesLinus,项目名称:glibc-mips,代码行数:30,代码来源:pthread_sigmask.c
示例10: __times
clock_t
__times (struct tms *buf)
{
INTERNAL_SYSCALL_DECL (err);
clock_t ret = INTERNAL_SYSCALL (times, err, 1, buf);
if (INTERNAL_SYSCALL_ERROR_P (ret, err)
&& __builtin_expect (INTERNAL_SYSCALL_ERRNO (ret, err) == EFAULT, 0))
{
/* This might be an error or not. For architectures which have
no separate return value and error indicators we cannot
distinguish a return value of -1 from an error. Do it the
hard way. We crash applications which pass in an invalid BUF
pointer. */
#define touch(v) \
do { \
clock_t temp = v; \
asm volatile ("" : "+r" (temp)); \
v = temp; \
} while (0)
touch (buf->tms_utime);
touch (buf->tms_stime);
touch (buf->tms_cutime);
touch (buf->tms_cstime);
/* If we come here the memory is valid and the kernel did not
return an EFAULT error. Return the value given by the kernel. */
}
/* Return value (clock_t) -1 signals an error, but if there wasn't any,
return the following value. */
if (ret == (clock_t) -1)
return (clock_t) 0;
return ret;
}
开发者ID:Akheon23,项目名称:chromecast-mirrored-source.toolchain,代码行数:35,代码来源:times.c
示例11: mq_unlink
/* Remove message queue named NAME. */
int
mq_unlink (const char *name)
{
if (name[0] != '/')
{
__set_errno (EINVAL);
return -1;
}
INTERNAL_SYSCALL_DECL (err);
int ret = INTERNAL_SYSCALL (mq_unlink, err, 1, name + 1);
/* While unlink can return either EPERM or EACCES, mq_unlink should
return just EACCES. */
if (__glibc_unlikely (INTERNAL_SYSCALL_ERROR_P (ret, err)))
{
ret = INTERNAL_SYSCALL_ERRNO (ret, err);
if (ret == EPERM)
ret = EACCES;
__set_errno (ret);
ret = -1;
}
return ret;
}
开发者ID:AubrCool,项目名称:glibc,代码行数:26,代码来源:mq_unlink.c
示例12: posix_fadvise
int
posix_fadvise (int fd, off_t offset, off_t len, int advise)
{
INTERNAL_SYSCALL_DECL (err);
# ifdef __NR_fadvise64
int ret = INTERNAL_SYSCALL_CALL (fadvise64, err, fd,
__ALIGNMENT_ARG SYSCALL_LL (offset),
len, advise);
# else
# ifdef __ASSUME_FADVISE64_64_6ARG
int ret = INTERNAL_SYSCALL_CALL (fadvise64_64, err, fd, advise,
__ALIGNMENT_ARG SYSCALL_LL (offset),
SYSCALL_LL (len));
# else
# ifdef __ASSUME_FADVISE64_64_NO_ALIGN
# undef __ALIGNMENT_ARG
# define __ALIGNMENT_ARG
# endif
int ret = INTERNAL_SYSCALL_CALL (fadvise64_64, err, fd,
__ALIGNMENT_ARG SYSCALL_LL (offset),
SYSCALL_LL (len), advise);
# endif
# endif
if (INTERNAL_SYSCALL_ERROR_P (ret, err))
return INTERNAL_SYSCALL_ERRNO (ret, err);
return 0;
}
开发者ID:kraj,项目名称:glibc,代码行数:29,代码来源:posix_fadvise.c
示例13: setup_thread
int
setup_thread (struct database_dyn *db)
{
#ifdef __NR_set_tid_address
/* Only supported when NPTL is used. */
char buf[100];
if (confstr (_CS_GNU_LIBPTHREAD_VERSION, buf, sizeof (buf)) >= sizeof (buf)
|| strncmp (buf, "NPTL", 4) != 0)
return 0;
/* Do not try this at home, kids. We play with the SETTID address
even thought the process is multi-threaded. This can only work
since none of the threads ever terminates. */
INTERNAL_SYSCALL_DECL (err);
int r = INTERNAL_SYSCALL (set_tid_address, err, 1,
&db->head->nscd_certainly_running);
if (!INTERNAL_SYSCALL_ERROR_P (r, err))
/* We know the kernel can reset this field when nscd terminates.
So, set the field to a nonzero value which indicates that nscd
is certainly running and clients can skip the test. */
return db->head->nscd_certainly_running = 1;
#endif
return 0;
}
开发者ID:riscv,项目名称:riscv-glibc,代码行数:25,代码来源:nscd_setup_thread.c
示例14: posix_fallocate
/* Reserve storage for the data of the file associated with FD. */
int
posix_fallocate (int fd, __off_t offset, __off_t len)
{
#ifdef __NR_fallocate
# ifndef __ASSUME_FALLOCATE
if (__builtin_expect (__have_fallocate >= 0, 1))
# endif
{
INTERNAL_SYSCALL_DECL (err);
int res = INTERNAL_SYSCALL (fallocate, err, 4, fd, 0, offset, len);
if (! INTERNAL_SYSCALL_ERROR_P (res, err))
return 0;
# ifndef __ASSUME_FALLOCATE
if (__builtin_expect (INTERNAL_SYSCALL_ERRNO (res, err) == ENOSYS, 0))
__have_fallocate = -1;
else
# endif
if (INTERNAL_SYSCALL_ERRNO (res, err) != EOPNOTSUPP)
return INTERNAL_SYSCALL_ERRNO (res, err);
}
#endif
return internal_fallocate (fd, offset, len);
}
开发者ID:AubrCool,项目名称:glibc,代码行数:27,代码来源:posix_fallocate.c
示例15: __pthread_setaffinity_new
int
__pthread_setaffinity_new (pthread_t th, size_t cpusetsize,
const cpu_set_t *cpuset)
{
const struct pthread *pd = (const struct pthread *) th;
INTERNAL_SYSCALL_DECL (err);
int res;
if (__builtin_expect (__kernel_cpumask_size == 0, 0))
{
res = __determine_cpumask_size (pd->tid);
if (res != 0)
return res;
}
/* We now know the size of the kernel cpumask_t. Make sure the user
does not request to set a bit beyond that. */
for (size_t cnt = __kernel_cpumask_size; cnt < cpusetsize; ++cnt)
if (((char *) cpuset)[cnt] != '\0')
/* Found a nonzero byte. This means the user request cannot be
fulfilled. */
return EINVAL;
res = INTERNAL_SYSCALL (sched_setaffinity, err, 3, pd->tid, cpusetsize,
cpuset);
return (INTERNAL_SYSCALL_ERROR_P (res, err)
? INTERNAL_SYSCALL_ERRNO (res, err)
: 0);
}
开发者ID:mbref,项目名称:glibc-236-microblaze,代码行数:30,代码来源:pthread_setaffinity.c
示例16: __clock_nanosleep
/* We can simply use the syscall. The CPU clocks are not supported
with this function. */
int
__clock_nanosleep (clockid_t clock_id, int flags, const struct timespec *req,
struct timespec *rem)
{
INTERNAL_SYSCALL_DECL (err);
int r;
if (clock_id == CLOCK_THREAD_CPUTIME_ID)
return EINVAL;
if (clock_id == CLOCK_PROCESS_CPUTIME_ID)
clock_id = MAKE_PROCESS_CPUCLOCK (0, CPUCLOCK_SCHED);
if (SINGLE_THREAD_P)
r = INTERNAL_SYSCALL (clock_nanosleep, err, 4, clock_id, flags, req, rem);
else
{
int oldstate = LIBC_CANCEL_ASYNC ();
r = INTERNAL_SYSCALL (clock_nanosleep, err, 4, clock_id, flags, req,
rem);
LIBC_CANCEL_RESET (oldstate);
}
return (INTERNAL_SYSCALL_ERROR_P (r, err)
? INTERNAL_SYSCALL_ERRNO (r, err) : 0);
}
开发者ID:bluecmd,项目名称:or1k-glibc,代码行数:29,代码来源:clock_nanosleep.c
示例17: __getegid
gid_t
__getegid (void)
{
INTERNAL_SYSCALL_DECL (err);
#if __ASSUME_32BITUIDS > 0
/* No error checking. */
return INTERNAL_SYSCALL (getegid32, err, 0);
#else
# ifdef __NR_getegid32
if (__libc_missing_32bit_uids <= 0)
{
int result;
result = INTERNAL_SYSCALL (getegid32, err, 0);
if (! INTERNAL_SYSCALL_ERROR_P (result, err)
|| INTERNAL_SYSCALL_ERRNO (result, err) != ENOSYS)
return result;
__libc_missing_32bit_uids = 1;
}
# endif /* __NR_getegid32 */
/* No error checking. */
return INTERNAL_SYSCALL (getegid, err, 0);
#endif
}
开发者ID:Akheon23,项目名称:chromecast-mirrored-source.toolchain,代码行数:26,代码来源:getegid.c
示例18: setfsuid
int
setfsuid (uid_t uid)
{
INTERNAL_SYSCALL_DECL (err);
# if __ASSUME_32BITUIDS > 0
/* No error checking. */
return INTERNAL_SYSCALL (setfsuid32, err, 1, uid);
# else
# ifdef __NR_setfsuid32
if (__libc_missing_32bit_uids <= 0)
{
int result;
result = INTERNAL_SYSCALL (setfsuid32, err, 1, uid);
if (! INTERNAL_SYSCALL_ERROR_P (result, err)
|| INTERNAL_SYSCALL_ERRNO (result, err) != ENOSYS)
return result;
__libc_missing_32bit_uids = 1;
}
# endif /* __NR_setfsuid32 */
if (uid != (uid_t) ((__kernel_uid_t) uid))
{
__set_errno (EINVAL);
return -1;
}
/* No error checking. */
return INTERNAL_SYSCALL (setfsuid, err, 1, uid);
# endif
}
开发者ID:mbref,项目名称:glibc-236-microblaze,代码行数:32,代码来源:setfsuid.c
示例19: __pthread_kill
int
__pthread_kill (pthread_t threadid, int signo)
{
struct pthread *pd = (struct pthread *) threadid;
/* Make sure the descriptor is valid. */
if (DEBUGGING_P && INVALID_TD_P (pd))
/* Not a valid thread handle. */
return ESRCH;
/* Force load of pd->tid into local variable or register. Otherwise
if a thread exits between ESRCH test and tgkill, we might return
EINVAL, because pd->tid would be cleared by the kernel. */
pid_t tid = atomic_forced_read (pd->tid);
if (__glibc_unlikely (tid <= 0))
/* Not a valid thread handle. */
return ESRCH;
/* Disallow sending the signal we use for cancellation, timers,
for the setxid implementation. */
if (signo == SIGCANCEL || signo == SIGTIMER || signo == SIGSETXID)
return EINVAL;
/* We have a special syscall to do the work. */
INTERNAL_SYSCALL_DECL (err);
pid_t pid = __getpid ();
int val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, tid, signo);
return (INTERNAL_SYSCALL_ERROR_P (val, err)
? INTERNAL_SYSCALL_ERRNO (val, err) : 0);
}
开发者ID:kraj,项目名称:glibc,代码行数:32,代码来源:pthread_kill.c
示例20: __sched_setaffinity_new
int
__sched_setaffinity_new (pid_t pid, size_t cpusetsize, const cpu_set_t *cpuset)
{
if (__builtin_expect (__kernel_cpumask_size == 0, 0))
{
INTERNAL_SYSCALL_DECL (err);
int res;
size_t psize = 128;
void *p = alloca (psize);
while (res = INTERNAL_SYSCALL (sched_getaffinity, err, 3, getpid (),
psize, p),
INTERNAL_SYSCALL_ERROR_P (res, err)
&& INTERNAL_SYSCALL_ERRNO (res, err) == EINVAL)
p = extend_alloca (p, psize, 2 * psize);
if (res == 0 || INTERNAL_SYSCALL_ERROR_P (res, err))
{
__set_errno (INTERNAL_SYSCALL_ERRNO (res, err));
return -1;
}
__kernel_cpumask_size = res;
}
/* We now know the size of the kernel cpumask_t. Make sure the user
does not request to set a bit beyond that. */
for (size_t cnt = __kernel_cpumask_size; cnt < cpusetsize; ++cnt)
if (((char *) cpuset)[cnt] != '\0')
{
/* Found a nonzero byte. This means the user request cannot be
fulfilled. */
__set_errno (EINVAL);
return -1;
}
int result = INLINE_SYSCALL (sched_setaffinity, 3, pid, cpusetsize, cpuset);
#ifdef RESET_VGETCPU_CACHE
if (result != -1)
RESET_VGETCPU_CACHE ();
#endif
return result;
}
开发者ID:Akheon23,项目名称:chromecast-mirrored-source.toolchain,代码行数:46,代码来源:sched_setaffinity.c
注:本文中的INTERNAL_SYSCALL_ERROR_P函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论