C++ INPUTLINE函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中INPUTLINE函数的典型用法代码示例。如果您正苦于以下问题：C++ INPUTLINE函数的具体用法？C++ INPUTLINE怎么用？C++ INPUTLINE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了INPUTLINE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MACHINE_CONFIG_START

static MACHINE_CONFIG_START( eacc, eacc_state )
	/* basic machine hardware */
	MCFG_CPU_ADD("maincpu", M6802, XTAL_3_579545MHz)  /* Divided by 4 inside the m6802*/
	MCFG_CPU_PROGRAM_MAP(eacc_mem)

	MCFG_DEFAULT_LAYOUT(layout_eacc)

	MCFG_DEVICE_ADD("pia", PIA6821, 0)
	MCFG_PIA_READPB_HANDLER(READ8(eacc_state, eacc_keyboard_r))
	MCFG_PIA_READCA1_HANDLER(READLINE(eacc_state, eacc_distance_r))
	MCFG_PIA_READCB1_HANDLER(READLINE(eacc_state, eacc_cb1_r))
	MCFG_PIA_READCA2_HANDLER(READLINE(eacc_state, eacc_fuel_sensor_r))
	MCFG_PIA_WRITEPA_HANDLER(WRITE8(eacc_state, eacc_segment_w))
	MCFG_PIA_WRITEPB_HANDLER(WRITE8(eacc_state, eacc_digit_w))
	MCFG_PIA_CB2_HANDLER(WRITELINE(eacc_state, eacc_cb2_w))
	MCFG_PIA_IRQA_HANDLER(INPUTLINE("maincpu", M6802_IRQ_LINE))
	MCFG_PIA_IRQB_HANDLER(INPUTLINE("maincpu", M6802_IRQ_LINE))

	MCFG_NVRAM_ADD_0FILL("nvram")
	MCFG_TIMER_DRIVER_ADD_PERIODIC("eacc_nmi", eacc_state, eacc_nmi, attotime::from_hz(600))
	MCFG_TIMER_DRIVER_ADD_PERIODIC("eacc_cb1", eacc_state, eacc_cb1, attotime::from_hz(30))
MACHINE_CONFIG_END



/******************************************************************************
 ROM Definitions
******************************************************************************/

ROM_START(eacc)
	ROM_REGION(0x10000, "maincpu", 0)

开发者ID:Robbbert，项目名称:store1，代码行数:31，代码来源:eacc.cpp

示例2: MCFG_SCREEN_REFRESH_RATE

	MCFG_SCREEN_REFRESH_RATE(60)
	MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0))
	MCFG_SCREEN_UPDATE_DEVICE("hd63484", h63484_device, update_screen)
	MCFG_SCREEN_SIZE(720, 480)
	MCFG_SCREEN_VISIBLE_AREA(0, 720-1, 0, 448-1)
	MCFG_SCREEN_PALETTE("palette")

	MCFG_PALETTE_ADD("palette", 16)
	MCFG_RAMDAC_ADD("ramdac", ramdac_map, "palette")

	MCFG_H63484_ADD("hd63484", 8000000, segajw_hd63484_map) // unknown clock

	/* sound hardware */
	MCFG_SPEAKER_STANDARD_MONO("mono")
	MCFG_SOUND_ADD("ymsnd", YM3438, 8000000)   // unknown clock
	MCFG_YM2612_IRQ_HANDLER(INPUTLINE("maincpu", 5))
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.50)
MACHINE_CONFIG_END

/***************************************************************************

  Game driver(s)

***************************************************************************/

ROM_START( segajw )
	ROM_REGION( 0x40000, "maincpu", 0 )
	ROM_LOAD16_BYTE( "14584b.epr",   0x00001, 0x20000, CRC(d3a6d63d) SHA1(ce9d4769b7514294a91af1dfd7cd10ee40b3572c) )
	ROM_LOAD16_BYTE( "14585b.epr",   0x00000, 0x20000, CRC(556d0a62) SHA1(d2def433a511cbdebbe2cd0c8e51fc8c4ff1ed7b) )

	ROM_REGION( 0x20000, "audiocpu", 0 )

开发者ID:DragonMinded，项目名称:mame，代码行数:31，代码来源:segajw.cpp

示例3: MCFG_SCREEN_REFRESH_RATE

	MCFG_SCREEN_REFRESH_RATE(60)
	MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0))
	MCFG_SCREEN_SIZE(256, 256)
	MCFG_SCREEN_VISIBLE_AREA(0, 256-1, 0+16, 256-16-1)
	MCFG_SCREEN_UPDATE_DRIVER(amspdwy_state, screen_update_amspdwy)
	MCFG_SCREEN_PALETTE("palette")

	MCFG_GFXDECODE_ADD("gfxdecode", "palette", amspdwy)
	MCFG_PALETTE_ADD("palette", 32)
	MCFG_PALETTE_FORMAT(BBGGGRRR_inverted)

	/* sound hardware */
	MCFG_SPEAKER_STANDARD_STEREO("lspeaker", "rspeaker")

	MCFG_GENERIC_LATCH_8_ADD("soundlatch")
	MCFG_GENERIC_LATCH_DATA_PENDING_CB(INPUTLINE("audiocpu", INPUT_LINE_NMI))

	MCFG_YM2151_ADD("ymsnd", 3000000)
	MCFG_YM2151_IRQ_HANDLER(INPUTLINE("audiocpu", 0))
	MCFG_SOUND_ROUTE(0, "lspeaker", 1.0)
	MCFG_SOUND_ROUTE(1, "rspeaker", 1.0)
MACHINE_CONFIG_END




/***************************************************************************


                                ROMs Loading

开发者ID:qwijibo，项目名称:mame，代码行数:30，代码来源:amspdwy.cpp

示例4: MCFG_DEVICE_ADD

	MCFG_DEVICE_ADD("maincpu", Z80, 4000000)   /* 4 MHz ? */
	MCFG_DEVICE_PROGRAM_MAP(mouser_map)
	MCFG_DEVICE_OPCODES_MAP(decrypted_opcodes_map)

	MCFG_DEVICE_ADD("audiocpu", Z80, 4000000)  /* ??? */
	MCFG_DEVICE_PROGRAM_MAP(mouser_sound_map)
	MCFG_DEVICE_IO_MAP(mouser_sound_io_map)
	MCFG_DEVICE_PERIODIC_INT_DRIVER(mouser_state, mouser_sound_nmi_assert,  4*60) /* ??? This controls the sound tempo */

	ls259_device &mainlatch(LS259(config, "mainlatch")); // type unconfirmed
	mainlatch.q_out_cb<0>().set(FUNC(mouser_state::nmi_enable_w));
	mainlatch.q_out_cb<1>().set(FUNC(mouser_state::flip_screen_x_w));
	mainlatch.q_out_cb<2>().set(FUNC(mouser_state::flip_screen_y_w));

	MCFG_GENERIC_LATCH_8_ADD("soundlatch")
	MCFG_GENERIC_LATCH_DATA_PENDING_CB(INPUTLINE("audiocpu", 0))

	/* video hardware */
	MCFG_SCREEN_ADD("screen", RASTER)
	MCFG_SCREEN_REFRESH_RATE(60)
	MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500) /* not accurate */)
	MCFG_SCREEN_SIZE(32*8, 32*8)
	MCFG_SCREEN_VISIBLE_AREA(0*8, 32*8-1, 2*8, 30*8-1)
	MCFG_SCREEN_UPDATE_DRIVER(mouser_state, screen_update_mouser)
	MCFG_SCREEN_PALETTE("palette")
	MCFG_SCREEN_VBLANK_CALLBACK(WRITELINE(*this, mouser_state, mouser_nmi_interrupt))

	MCFG_DEVICE_ADD("gfxdecode", GFXDECODE, "palette", gfx_mouser)
	MCFG_PALETTE_ADD("palette", 64)
	MCFG_PALETTE_INIT_OWNER(mouser_state, mouser)

开发者ID:MASHinfo，项目名称:mame，代码行数:30，代码来源:mouser.cpp

示例5: WRITE_LINE_MEMBER

}

WRITE_LINE_MEMBER(isbc_state::isbc_uart8274_irq)
{
	m_uart8274->m1_r(); // always set
	m_pic_0->ir6_w(state);
}

static MACHINE_CONFIG_START( isbc86, isbc_state )
	/* basic machine hardware */
	MCFG_CPU_ADD("maincpu", I8086, XTAL_5MHz)
	MCFG_CPU_PROGRAM_MAP(isbc86_mem)
	MCFG_CPU_IO_MAP(isbc_io)
	MCFG_CPU_IRQ_ACKNOWLEDGE_DEVICE("pic_0", pic8259_device, inta_cb)

	MCFG_PIC8259_ADD("pic_0", INPUTLINE(":maincpu", 0), VCC, NULL)

	MCFG_DEVICE_ADD("pit", PIT8253, 0)
	MCFG_PIT8253_CLK0(XTAL_22_1184MHz/18)
	MCFG_PIT8253_OUT0_HANDLER(DEVWRITELINE("pic_0", pic8259_device, ir0_w))
	MCFG_PIT8253_CLK1(XTAL_22_1184MHz/18)
	MCFG_PIT8253_CLK2(XTAL_22_1184MHz/18)
	MCFG_PIT8253_OUT2_HANDLER(WRITELINE(isbc_state, isbc86_tmr2_w))

	MCFG_DEVICE_ADD("ppi", I8255A, 0)

	MCFG_DEVICE_ADD("uart8251", I8251, 0)
	MCFG_I8251_TXD_HANDLER(DEVWRITELINE("rs232", rs232_port_device, write_txd))
	MCFG_I8251_DTR_HANDLER(DEVWRITELINE("rs232", rs232_port_device, write_dtr))
	MCFG_I8251_RTS_HANDLER(DEVWRITELINE("rs232", rs232_port_device, write_rts))
	MCFG_I8251_RXRDY_HANDLER(DEVWRITELINE("pic_0", pic8259_device, ir6_w))

开发者ID:MisterTea，项目名称:MAMEHub，代码行数:31，代码来源:isbc.c

示例6: MCFG_SOUND_ROUTE

	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)

	// internal ram
	MCFG_RAM_ADD(RAM_TAG)
	MCFG_RAM_DEFAULT_SIZE("256k")
	MCFG_RAM_EXTRA_OPTIONS("384k,512k") // with 1 or 2 128k expansion boards

	// devices
	MCFG_DEVICE_ADD("ic17", I8255A, 0)
	MCFG_I8255_IN_PORTA_CB(DEVREAD8("cent_data_in", input_buffer_device, read))
	MCFG_I8255_OUT_PORTA_CB(DEVWRITE8("cent_data_out", output_latch_device, write))
	MCFG_I8255_OUT_PORTB_CB(WRITE8(apricot_state, i8255_portb_w))
	MCFG_I8255_IN_PORTC_CB(READ8(apricot_state, i8255_portc_r))
	MCFG_I8255_OUT_PORTC_CB(WRITE8(apricot_state, i8255_portc_w))

	MCFG_PIC8259_ADD("ic31", INPUTLINE("ic91", 0), VCC, NULL)

	MCFG_DEVICE_ADD("ic16", PIT8253, 0)
	MCFG_PIT8253_CLK0(XTAL_4MHz / 16)
	MCFG_PIT8253_OUT0_HANDLER(DEVWRITELINE("ic31", pic8259_device, ir6_w))
	MCFG_PIT8253_CLK1(XTAL_4MHz / 2)
	MCFG_PIT8253_OUT1_HANDLER(WRITELINE(apricot_state, timer_out1))
	MCFG_PIT8253_CLK2(XTAL_4MHz / 2)
	MCFG_PIT8253_OUT2_HANDLER(WRITELINE(apricot_state, timer_out2))

	MCFG_Z80SIO0_ADD("ic15", XTAL_15MHz / 6, 0, 0, XTAL_4MHz / 16, XTAL_4MHz / 16)
	MCFG_Z80DART_OUT_TXDA_CB(DEVWRITELINE("rs232", rs232_port_device, write_txd))
	MCFG_Z80DART_OUT_DTRA_CB(DEVWRITELINE("rs232", rs232_port_device, write_dtr))
	MCFG_Z80DART_OUT_RTSA_CB(DEVWRITELINE("rs232", rs232_port_device, write_rts))
	MCFG_Z80DART_OUT_WRDYA_CB(DEVWRITELINE("ic71", i8089_device, drq2_w))
	MCFG_Z80DART_OUT_DTRB_CB(WRITELINE(apricot_state, data_selector_dtr_w))

开发者ID:Archlogic，项目名称:libretro-mame，代码行数:31，代码来源:apricot.c

示例7: MCFG_CPU_PROGRAM_MAP

MCFG_CPU_PROGRAM_MAP(cpu_mem)
MCFG_CPU_IO_MAP(cpu_io)
MCFG_CPU_IRQ_ACKNOWLEDGE_DEVICE(DEVICE_SELF, epson_tf20_device,irq_callback)

// 64k internal ram
MCFG_RAM_ADD("ram")
MCFG_RAM_DEFAULT_SIZE("64k")

// upd7201 serial interface
MCFG_UPD7201_ADD("3a", XTAL_CR1 / 2, 0, 0, 0, 0)
MCFG_Z80DART_OUT_TXDA_CB(WRITELINE(epson_tf20_device, txda_w))
MCFG_Z80DART_OUT_DTRA_CB(WRITELINE(epson_tf20_device, dtra_w))

// floppy disk controller
MCFG_UPD765A_ADD("5a", true, true)
MCFG_UPD765_INTRQ_CALLBACK(INPUTLINE("19b", INPUT_LINE_IRQ0))

// floppy drives
MCFG_FLOPPY_DRIVE_ADD("5a:0", tf20_floppies, "sd320", floppy_image_device::default_floppy_formats)
MCFG_FLOPPY_DRIVE_ADD("5a:1", tf20_floppies, "sd320", floppy_image_device::default_floppy_formats)

// serial interface to another device
MCFG_EPSON_SIO_ADD("sio", nullptr)
MCFG_EPSON_SIO_RX(DEVWRITELINE(DEVICE_SELF, epson_tf20_device, rxc_w))
MCFG_EPSON_SIO_PIN(DEVWRITELINE(DEVICE_SELF, epson_tf20_device, pinc_w))
MACHINE_CONFIG_END

machine_config_constructor epson_tf20_device::device_mconfig_additions() const
{
    return MACHINE_CONFIG_NAME( tf20 );
}

开发者ID:DragonMinded，项目名称:mame，代码行数:31，代码来源:tf20.cpp

示例8: MCFG_SCREEN_SIZE

	MCFG_SCREEN_SIZE(40 * 12, 24 * 20)
	MCFG_SCREEN_VISIBLE_AREA(0, 40 * 12 - 1, 0, 24 * 20 - 1)
	MCFG_SCREEN_UPDATE_DEVICE("saa5050", saa5050_device, screen_update)

	/* sound hardware */
	MCFG_SPEAKER_STANDARD_MONO("mono")
	MCFG_SOUND_ADD("speaker", SPEAKER_SOUND, 0)
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.50)

	/* Devices */
	MCFG_DEVICE_ADD("saa5050", SAA5050, 6000000)
	MCFG_SAA5050_D_CALLBACK(READ8(poly_state, videoram_r))
	MCFG_SAA5050_SCREEN_SIZE(40, 24, 40)

	MCFG_DEVICE_ADD("pia0", PIA6821, 0)
	MCFG_PIA_IRQA_HANDLER(INPUTLINE("maincpu", M6809_IRQ_LINE))
	MCFG_PIA_IRQB_HANDLER(INPUTLINE("maincpu", M6809_IRQ_LINE))

	MCFG_DEVICE_ADD("pia1", PIA6821, 0)
	MCFG_PIA_READPB_HANDLER(READ8(poly_state, pia1_b_in))
	// CB1 kbd strobe
	MCFG_PIA_IRQA_HANDLER(INPUTLINE("maincpu", M6809_IRQ_LINE))
	MCFG_PIA_IRQB_HANDLER(INPUTLINE("maincpu", M6809_IRQ_LINE))

	MCFG_DEVICE_ADD("ptm", PTM6840, 0)
	MCFG_PTM6840_INTERNAL_CLOCK(XTAL_12MHz / 3)
	MCFG_PTM6840_EXTERNAL_CLOCKS(0, 0, 0)
	MCFG_PTM6840_OUT1_CB(WRITE8(poly_state, ptm_o2_callback))
	MCFG_PTM6840_OUT2_CB(WRITE8(poly_state, ptm_o3_callback))
	MCFG_PTM6840_IRQ_CB(INPUTLINE("maincpu", M6809_IRQ_LINE))

开发者ID:bradhugh，项目名称:mame，代码行数:30，代码来源:poly.cpp

示例9: MCFG_SCREEN_REFRESH_RATE

	MCFG_SCREEN_REFRESH_RATE(60)
	MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500) /* not accurate */)
	MCFG_SCREEN_SIZE(32*8, 32*8)
	MCFG_SCREEN_VISIBLE_AREA(0*8, 32*8-1, 1*8, 31*8-1)
	MCFG_SCREEN_UPDATE_DRIVER(shootout_state, screen_update_shootout)
	MCFG_SCREEN_PALETTE("palette")

	MCFG_GFXDECODE_ADD("gfxdecode", "palette", shootout)
	MCFG_PALETTE_ADD("palette", 256)
	MCFG_PALETTE_INIT_OWNER(shootout_state, shootout)

	/* sound hardware */
	MCFG_SPEAKER_STANDARD_MONO("mono")

	MCFG_SOUND_ADD("ymsnd", YM2203, 1500000)
	MCFG_YM2203_IRQ_HANDLER(INPUTLINE("audiocpu", M6502_IRQ_LINE))
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.50)
MACHINE_CONFIG_END


static MACHINE_CONFIG_START( shootouj, shootout_state )

	/* basic machine hardware */
	MCFG_CPU_ADD("maincpu", M6502, 2000000) /* 2 MHz? */
	MCFG_CPU_PROGRAM_MAP(shootouj_map)

	/* video hardware */
	MCFG_SCREEN_ADD("screen", RASTER)
	MCFG_SCREEN_REFRESH_RATE(60)
	MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500) /* not accurate */)
	MCFG_SCREEN_SIZE(32*8, 32*8)

开发者ID:NULUSIOS，项目名称:mame，代码行数:31，代码来源:shootout.cpp

示例10: MACHINE_CONFIG_FRAGMENT

static MACHINE_CONFIG_FRAGMENT( pcx_video )
	MCFG_CPU_ADD("graphics", I8031, XTAL_24MHz/2)
	MCFG_CPU_PROGRAM_MAP(pcx_vid_map)
	MCFG_CPU_IO_MAP(pcx_vid_io)

	// video hardware
	MCFG_SCREEN_ADD("screen", RASTER)
	MCFG_SCREEN_SIZE(640, 350)
	MCFG_SCREEN_VISIBLE_AREA(0, 639, 0, 349)
	MCFG_SCREEN_REFRESH_RATE(50)
	MCFG_SCREEN_UPDATE_DEVICE("crtc", scn2674_device, screen_update)

	MCFG_GFXDECODE_ADD("gfxdecode", "palette", pcx)
	MCFG_PALETTE_ADD_BLACK_AND_WHITE("palette")

	MCFG_SCN2674_VIDEO_ADD("crtc", 0, INPUTLINE("graphics", MCS51_INT0_LINE));
	MCFG_SCN2674_TEXT_CHARACTER_WIDTH(8)
	MCFG_SCN2674_GFX_CHARACTER_WIDTH(16)
	MCFG_SCN2674_DRAW_CHARACTER_CALLBACK_OWNER(pcx_video_device, display_pixels)
	MCFG_VIDEO_SET_SCREEN("screen")
	MCFG_DEVICE_ADDRESS_MAP(AS_0, pcx_vram)
MACHINE_CONFIG_END

machine_config_constructor pcx_video_device::device_mconfig_additions() const
{
	return MACHINE_CONFIG_NAME( pcx_video );
}

SCN2674_DRAW_CHARACTER_MEMBER(pcd_video_device::display_pixels)
{
	address <<= 1;

开发者ID:DragonMinded，项目名称:mame，代码行数:31，代码来源:pcd.cpp

示例11: MACHINE_CONFIG_START

//-------------------------------------------------
//  device_add_mconfig - add device configuration
//-------------------------------------------------

MACHINE_CONFIG_START(bbc_tube_z80_device::device_add_mconfig)
	MCFG_DEVICE_ADD("z80", Z80, XTAL(12'000'000) / 2)
	MCFG_DEVICE_PROGRAM_MAP(tube_z80_mem)
	MCFG_DEVICE_OPCODES_MAP(tube_z80_fetch)
	MCFG_DEVICE_IO_MAP(tube_z80_io)
	MCFG_DEVICE_IRQ_ACKNOWLEDGE_DEVICE(DEVICE_SELF, bbc_tube_z80_device, irq_callback)

	MCFG_TUBE_ADD("ula")
	MCFG_TUBE_HIRQ_HANDLER(WRITELINE(DEVICE_SELF_OWNER, bbc_tube_slot_device, irq_w))
	MCFG_TUBE_PNMI_HANDLER(WRITELINE(*this, bbc_tube_z80_device, nmi_w))
	MCFG_TUBE_PIRQ_HANDLER(INPUTLINE("z80", INPUT_LINE_IRQ0))

	/* internal ram */
	MCFG_RAM_ADD(RAM_TAG)
	MCFG_RAM_DEFAULT_SIZE("64K")
	MCFG_RAM_DEFAULT_VALUE(0x00)

	/* software lists */
	MCFG_SOFTWARE_LIST_ADD("flop_ls_z80", "bbc_flop_z80")
MACHINE_CONFIG_END

//-------------------------------------------------
//  rom_region - device-specific ROM region
//-------------------------------------------------

const tiny_rom_entry *bbc_tube_z80_device::device_rom_region() const

开发者ID:RafTacker，项目名称:mame，代码行数:30，代码来源:tube_z80.cpp

示例12: MCFG_DEVICE_ADD

	MCFG_DEVICE_ADD("fgcpu", Z80,XTAL1/4) // ?
	MCFG_DEVICE_PROGRAM_MAP(divebomb_fgcpu_map)
	MCFG_DEVICE_IO_MAP(divebomb_fgcpu_iomap)

	MCFG_DEVICE_ADD("spritecpu", Z80,XTAL1/4) // ?
	MCFG_DEVICE_PROGRAM_MAP(divebomb_spritecpu_map)
	MCFG_DEVICE_IO_MAP(divebomb_spritecpu_iomap)

	MCFG_DEVICE_ADD("rozcpu", Z80,XTAL1/4) // ?
	MCFG_DEVICE_PROGRAM_MAP(divebomb_rozcpu_map)
	MCFG_DEVICE_IO_MAP(divebomb_rozcpu_iomap)

	MCFG_QUANTUM_PERFECT_CPU("fgcpu")

	MCFG_INPUT_MERGER_ANY_HIGH("fgcpu_irq")
	MCFG_INPUT_MERGER_OUTPUT_HANDLER(INPUTLINE("fgcpu", INPUT_LINE_IRQ0))

	MCFG_GENERIC_LATCH_8_ADD("fg2spr")
	MCFG_GENERIC_LATCH_DATA_PENDING_CB(INPUTLINE("spritecpu", INPUT_LINE_IRQ0))

	MCFG_GENERIC_LATCH_8_ADD("fg2roz")
	MCFG_GENERIC_LATCH_DATA_PENDING_CB(INPUTLINE("rozcpu", INPUT_LINE_IRQ0))

	MCFG_GENERIC_LATCH_8_ADD("spr2fg")
	MCFG_GENERIC_LATCH_DATA_PENDING_CB(WRITELINE("fgcpu_irq", input_merger_any_high_device, in_w<0>))

	MCFG_GENERIC_LATCH_8_ADD("roz2fg")
	MCFG_GENERIC_LATCH_DATA_PENDING_CB(WRITELINE("fgcpu_irq", input_merger_any_high_device, in_w<1>))

	MCFG_DEVICE_ADD("k051316_1", K051316, 0)
	MCFG_GFX_PALETTE("palette")

开发者ID:MASHinfo，项目名称:mame，代码行数:31，代码来源:divebomb.cpp

示例13: MACHINE_CONFIG_START

MACHINE_CONFIG_START(bbc_tube_casper_device::device_add_mconfig)
	MCFG_CPU_ADD("m68000", M68000, XTAL(4'000'000))
	MCFG_CPU_PROGRAM_MAP(tube_casper_mem)

	MCFG_DEVICE_ADD("via6522_0", VIA6522, XTAL(4'000'000) / 2)
	MCFG_VIA6522_WRITEPB_HANDLER(DEVWRITE8("via6522_1", via6522_device, write_pa))
	MCFG_VIA6522_CA2_HANDLER(DEVWRITELINE("via6522_1", via6522_device, write_cb1))
	MCFG_VIA6522_CB2_HANDLER(DEVWRITELINE("via6522_1", via6522_device, write_ca1))
	MCFG_VIA6522_IRQ_HANDLER(DEVWRITELINE(DEVICE_SELF_OWNER, bbc_tube_slot_device, irq_w))

	MCFG_DEVICE_ADD("via6522_1", VIA6522, XTAL(4'000'000) / 2)
	MCFG_VIA6522_WRITEPB_HANDLER(DEVWRITE8("via6522_0", via6522_device, write_pa))
	MCFG_VIA6522_CA2_HANDLER(DEVWRITELINE("via6522_0", via6522_device, write_cb1))
	MCFG_VIA6522_CB2_HANDLER(DEVWRITELINE("via6522_0", via6522_device, write_ca1))
	MCFG_VIA6522_IRQ_HANDLER(INPUTLINE("maincpu", M68K_IRQ_1))

	/* software lists */
	MCFG_SOFTWARE_LIST_ADD("flop_ls_casper", "bbc_flop_68000")
MACHINE_CONFIG_END

//-------------------------------------------------
//  rom_region - device-specific ROM region
//-------------------------------------------------

const tiny_rom_entry *bbc_tube_casper_device::device_rom_region() const
{
	return ROM_NAME( tube_casper );
}

//**************************************************************************

开发者ID:rootfather，项目名称:mame，代码行数:30，代码来源:tube_casper.cpp

示例14: MCFG_DEVICE_ADD

MCFG_DEVICE_ADD("modppi1", I8255, 0)
MCFG_DEVICE_ADD("modppi2", I8255, 0)

MCFG_DEVICE_ADD("moduart", I8251, XTAL_4MHz / 2) // divider guessed

MCFG_DEVICE_ADD("rtc", MM58167, XTAL_32_768kHz)

MACHINE_CONFIG_END

static MACHINE_CONFIG_START( pg675, pg685_state )
// main cpu
MCFG_CPU_ADD("maincpu", I8088, XTAL_15MHz / 3)
MCFG_CPU_PROGRAM_MAP(pg675_mem)
MCFG_CPU_IRQ_ACKNOWLEDGE_DEVICE("mainpic", pic8259_device, inta_cb)

MCFG_PIC8259_ADD("mainpic", INPUTLINE("maincpu", 0), VCC, NOOP)

// i/o cpu

// ram

// video hardware
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_RAW_PARAMS(12288000, 882, 0, 720, 370, 0, 350 ) // not real values
MCFG_SCREEN_UPDATE_DEVICE( "crtc", mc6845_device, screen_update )

MCFG_MC6845_ADD("crtc", MC6845, "screen", 12288000)
MCFG_MC6845_SHOW_BORDER_AREA(false)
MCFG_MC6845_CHAR_WIDTH(8)
MCFG_MC6845_UPDATE_ROW_CB(pg685_state, crtc_update_row)

开发者ID:Robbbert，项目名称:store1，代码行数:30，代码来源:pg685.cpp

示例15: MACHINE_CONFIG_START

/*************************
*    Machine Drivers     *
*************************/

static MACHINE_CONFIG_START( jwildb52, sigmab52_state )

	/* basic machine hardware */
	MCFG_CPU_ADD("maincpu", M6809, MAIN_CLOCK/9)    /* 2 MHz */
	MCFG_CPU_PROGRAM_MAP(jwildb52_map)

	MCFG_CPU_ADD("audiocpu", M6809, MAIN_CLOCK/9)   /* 2 MHz */
	MCFG_CPU_PROGRAM_MAP(sound_prog_map)

	MCFG_DEVICE_ADD("6840ptm_1", PTM6840, 0)
	MCFG_PTM6840_INTERNAL_CLOCK(MAIN_CLOCK/9)       // FIXME
	MCFG_PTM6840_IRQ_CB(INPUTLINE("maincpu", M6809_IRQ_LINE))

	MCFG_DEVICE_ADD("6840ptm_2", PTM6840, 0)
	MCFG_PTM6840_INTERNAL_CLOCK(MAIN_CLOCK/18)      // FIXME
	MCFG_PTM6840_IRQ_CB(WRITELINE(sigmab52_state, ptm2_irq))

	MCFG_NVRAM_ADD_NO_FILL("nvram")

	MCFG_SCREEN_ADD("screen", RASTER)
	MCFG_SCREEN_REFRESH_RATE(30)
	MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0))
	MCFG_SCREEN_SIZE(1024, 1024)
	MCFG_SCREEN_VISIBLE_AREA(0, 544-1, 0, 436-1)
	MCFG_SCREEN_UPDATE_DEVICE("hd63484", hd63484_device, update_screen)
	MCFG_SCREEN_PALETTE("palette")

开发者ID:goofwear，项目名称:mame，代码行数:30，代码来源:sigmab52.cpp

示例16: MCFG_SPEAKER_STANDARD_MONO

	/* sound hardware */
	MCFG_SPEAKER_STANDARD_MONO("mono")

	//MCFG_DAC_ADD("dac")
	//MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
	MCFG_SOUND_ADD("custom", BEEZER, 0)
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.00)

	/* via */
	MCFG_DEVICE_ADD("via6522_0", VIA6522, 0)
	MCFG_VIA6522_READPA_HANDLER(READ8(beezer_state, b_via_0_pa_r))
	MCFG_VIA6522_READPB_HANDLER(READ8(beezer_state, b_via_0_pb_r))
	MCFG_VIA6522_WRITEPA_HANDLER(WRITE8(beezer_state, b_via_0_pa_w))
	MCFG_VIA6522_WRITEPB_HANDLER(WRITE8(beezer_state, b_via_0_pb_w))
	MCFG_VIA6522_CB2_HANDLER(DEVWRITELINE("via6522_1", via6522_device, write_ca1))
	MCFG_VIA6522_IRQ_HANDLER(INPUTLINE("maincpu", M6809_IRQ_LINE))

	MCFG_DEVICE_ADD("via6522_1", VIA6522, 0)
	MCFG_VIA6522_READPA_HANDLER(READ8(beezer_state, b_via_1_pa_r))
	MCFG_VIA6522_READPB_HANDLER(READ8(beezer_state, b_via_1_pb_r))
	MCFG_VIA6522_WRITEPA_HANDLER(WRITE8(beezer_state, b_via_1_pa_w))
	MCFG_VIA6522_WRITEPB_HANDLER(WRITE8(beezer_state, b_via_1_pb_w))
	MCFG_VIA6522_CA2_HANDLER(DEVWRITELINE("via6522_0", via6522_device, write_cb1))
	MCFG_VIA6522_IRQ_HANDLER(INPUTLINE("audiocpu", M6809_IRQ_LINE))
MACHINE_CONFIG_END

/***************************************************************************

  Game driver(s)

***************************************************************************/

开发者ID:bradhugh，项目名称:mame，代码行数:31，代码来源:beezer.cpp

示例17: MCFG_CPU_ADD

	MCFG_CPU_ADD("maincpu", Z80, XTAL_8MHz / 2)
	MCFG_CPU_PROGRAM_MAP(rc702_mem)
	MCFG_CPU_IO_MAP(rc702_io)
	MCFG_Z80_DAISY_CHAIN(daisy_chain_intf)

	MCFG_MACHINE_RESET_OVERRIDE(rc702_state, rc702)

	MCFG_DEVICE_ADD("ctc_clock", CLOCK, 614000)
	MCFG_CLOCK_SIGNAL_HANDLER(WRITELINE(rc702_state, clock_w))

	MCFG_DEVICE_ADD("ctc1", Z80CTC, XTAL_8MHz / 2)
	MCFG_Z80CTC_ZC0_CB(WRITELINE(rc702_state, zc0_w))
	MCFG_Z80CTC_ZC1_CB(DEVWRITELINE("sio1", z80dart_device, rxtxcb_w))

	MCFG_Z80DART_ADD("sio1", XTAL_8MHz / 2, 0, 0, 0, 0 )
	MCFG_Z80DART_OUT_INT_CB(INPUTLINE("maincpu", INPUT_LINE_IRQ0))

	MCFG_DEVICE_ADD("pio", Z80PIO, XTAL_8MHz / 2)
	MCFG_Z80PIO_OUT_INT_CB(INPUTLINE("maincpu", INPUT_LINE_IRQ0))
//	MCFG_Z80PIO_OUT_PB_CB(WRITE8(rc702_state, portxx_w)) // parallel port

	MCFG_DEVICE_ADD("dma", AM9517A, XTAL_8MHz / 2)
	MCFG_I8237_OUT_HREQ_CB(WRITELINE(rc702_state, busreq_w))
	MCFG_I8237_OUT_EOP_CB(WRITELINE(rc702_state, tc_w)) // inverted
	MCFG_I8237_IN_MEMR_CB(READ8(rc702_state, memory_read_byte))
	MCFG_I8237_OUT_MEMW_CB(WRITE8(rc702_state, memory_write_byte))
	MCFG_I8237_IN_IOR_1_CB(DEVREAD8("fdc", upd765a_device, mdma_r))
	MCFG_I8237_OUT_IOW_1_CB(DEVWRITE8("fdc", upd765a_device, mdma_w))
	MCFG_I8237_OUT_IOW_2_CB(DEVWRITE8("crtc", i8275_device, dack_w))
	MCFG_I8237_OUT_IOW_3_CB(DEVWRITE8("crtc", i8275_device, dack_w))
	MCFG_I8237_OUT_DACK_1_CB(WRITELINE(rc702_state, dack1_w)) // inverted

开发者ID:bradhugh，项目名称:mame，代码行数:31，代码来源:rc702.cpp

示例18: MCFG_SCREEN_VBLANK_TIME

	MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500) /* not accurate */)
	MCFG_SCREEN_SIZE(512, 256)
	MCFG_SCREEN_VISIBLE_AREA(80, 511-112, 8, 247) /* 320 x 240 */
	MCFG_SCREEN_UPDATE_DRIVER(m107_state, screen_update_m107)
	MCFG_SCREEN_PALETTE("palette")

	MCFG_GFXDECODE_ADD("gfxdecode", "palette", firebarr)
	MCFG_PALETTE_ADD("palette", 2048)
	MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)


	/* sound hardware */
	MCFG_SPEAKER_STANDARD_STEREO("lspeaker", "rspeaker")

	MCFG_YM2151_ADD("ymsnd", 14318180/4)
	MCFG_YM2151_IRQ_HANDLER(INPUTLINE("soundcpu", NEC_INPUT_LINE_INTP0))
	MCFG_SOUND_ROUTE(0, "lspeaker", 0.40)
	MCFG_SOUND_ROUTE(1, "rspeaker", 0.40)

	MCFG_IREMGA20_ADD("irem", 14318180/4)
	MCFG_SOUND_ROUTE(0, "lspeaker", 1.0)
	MCFG_SOUND_ROUTE(1, "rspeaker", 1.0)
MACHINE_CONFIG_END

static MACHINE_CONFIG_DERIVED( dsoccr94, firebarr )

	/* basic machine hardware */
	MCFG_CPU_MODIFY("maincpu")
	MCFG_CPU_CLOCK(20000000/2)  /* NEC V33, Could be 28MHz clock? */

	MCFG_CPU_MODIFY("soundcpu")

开发者ID:Archlogic，项目名称:libretro-mame，代码行数:31，代码来源:m107.c

示例19: MCFG_DECO16IC_PF2_COL_MASK

	MCFG_DECO16IC_PF2_COL_MASK(0x0f)
	MCFG_DECO16IC_BANK1_CB(dietgo_state, bank_callback)
	MCFG_DECO16IC_BANK2_CB(dietgo_state, bank_callback)
	MCFG_DECO16IC_PF12_8X8_BANK(0)
	MCFG_DECO16IC_PF12_16X16_BANK(1)
	MCFG_DECO16IC_GFXDECODE("gfxdecode")

	MCFG_DEVICE_ADD("spritegen", DECO_SPRITE, 0)
	MCFG_DECO_SPRITE_GFX_REGION(2)
	MCFG_DECO_SPRITE_GFXDECODE("gfxdecode")

	MCFG_DECO104_ADD("ioprot104")
	MCFG_DECO146_IN_PORTA_CB(IOPORT("INPUTS"))
	MCFG_DECO146_IN_PORTB_CB(IOPORT("SYSTEM"))
	MCFG_DECO146_IN_PORTC_CB(IOPORT("DSW"))
	MCFG_DECO146_SOUNDLATCH_IRQ_CB(INPUTLINE("audiocpu", 0))
	MCFG_DECO146_SET_INTERFACE_SCRAMBLE_INTERLEAVE
	MCFG_DECO146_SET_USE_MAGIC_ADDRESS_XOR

	/* sound hardware */
	MCFG_SPEAKER_STANDARD_MONO("mono")

	MCFG_YM2151_ADD("ymsnd", XTAL_32_22MHz/9) /* verified on pcb */
	MCFG_YM2151_IRQ_HANDLER(INPUTLINE("audiocpu", 1)) /* IRQ 2 */
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.45)

	MCFG_OKIM6295_ADD("oki", XTAL_32_22MHz/32, PIN7_HIGH) /* verified on pcb */
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.60)
MACHINE_CONFIG_END

开发者ID:qwijibo，项目名称:mame，代码行数:29，代码来源:dietgo.cpp

示例20: MACHINE_CONFIG_START

void bbcbc_state::machine_reset()
{
}


static MACHINE_CONFIG_START( bbcbc, bbcbc_state )
	MCFG_CPU_ADD( "maincpu", Z80, MAIN_CLOCK / 8 )
	MCFG_CPU_PROGRAM_MAP( bbcbc_prg)
	MCFG_CPU_IO_MAP( bbcbc_io)
	MCFG_Z80_DAISY_CHAIN(bbcbc_daisy_chain)

	MCFG_DEVICE_ADD("z80pio", Z80PIO, MAIN_CLOCK/8)

	MCFG_DEVICE_ADD( "tms9129", TMS9129, XTAL_10_738635MHz / 2 )
	MCFG_TMS9928A_VRAM_SIZE(0x4000)
	MCFG_TMS9928A_OUT_INT_LINE_CB(INPUTLINE("maincpu", 0))
	MCFG_TMS9928A_SCREEN_ADD_PAL( "screen" )
	MCFG_SCREEN_UPDATE_DEVICE( "tms9129", tms9928a_device, screen_update )

	MCFG_GENERIC_CARTSLOT_ADD("cartslot", generic_plain_slot, "bbcbc_cart")

	/* Software lists */
	MCFG_SOFTWARE_LIST_ADD("cart_list","bbcbc")
MACHINE_CONFIG_END


ROM_START( bbcbc )
	ROM_REGION( 0x10000, "maincpu", ROMREGION_ERASEFF )
	ROM_LOAD("br_4_1.ic3", 0x0000, 0x2000, CRC(7c880d75) SHA1(954db096bd9e8edfef72946637a12f1083841fb0))
	ROM_LOAD("br_4_2.ic4", 0x2000, 0x2000, CRC(16a33aef) SHA1(9529f9f792718a3715af2063b91a5fb18f741226))
ROM_END

开发者ID:Fulg，项目名称:mame，代码行数:31，代码来源:bbcbc.cpp

注：本文中的INPUTLINE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ INPUT_PORTS_NAME函数代码示例发布时间：2022-05-30

C++ INODE_PKEY函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19219|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ INPUTLINE函数代码示例

示例1: MACHINE_CONFIG_START

示例2: MCFG_SCREEN_REFRESH_RATE

示例3: MCFG_SCREEN_REFRESH_RATE

示例4: MCFG_DEVICE_ADD

示例5: WRITE_LINE_MEMBER

示例6: MCFG_SOUND_ROUTE

示例7: MCFG_CPU_PROGRAM_MAP

示例8: MCFG_SCREEN_SIZE

示例9: MCFG_SCREEN_REFRESH_RATE

示例10: MACHINE_CONFIG_FRAGMENT

示例11: MACHINE_CONFIG_START

示例12: MCFG_DEVICE_ADD

示例13: MACHINE_CONFIG_START

示例14: MCFG_DEVICE_ADD

示例15: MACHINE_CONFIG_START

示例16: MCFG_SPEAKER_STANDARD_MONO

示例17: MCFG_CPU_ADD

示例18: MCFG_SCREEN_VBLANK_TIME

示例19: MCFG_DECO16IC_PF2_COL_MASK

示例20: MACHINE_CONFIG_START

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

elm/core: Elm&#39;s core libraries

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

elm/core: Elm's core libraries