C++ IDirect3DDevice9Ex_AddRef函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IDirect3DDevice9Ex_AddRef函数的典型用法代码示例。如果您正苦于以下问题：C++ IDirect3DDevice9Ex_AddRef函数的具体用法？C++ IDirect3DDevice9Ex_AddRef怎么用？C++ IDirect3DDevice9Ex_AddRef使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IDirect3DDevice9Ex_AddRef函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: stateblock_init

HRESULT stateblock_init(struct d3d9_stateblock *stateblock, struct d3d9_device *device,
        D3DSTATEBLOCKTYPE type, struct wined3d_stateblock *wined3d_stateblock)
{
    HRESULT hr;

    stateblock->IDirect3DStateBlock9_iface.lpVtbl = &d3d9_stateblock_vtbl;
    stateblock->refcount = 1;

    if (wined3d_stateblock)
    {
        stateblock->wined3d_stateblock = wined3d_stateblock;
    }
    else
    {
        wined3d_mutex_lock();
        hr = wined3d_stateblock_create(device->wined3d_device,
                (enum wined3d_stateblock_type)type, &stateblock->wined3d_stateblock);
        wined3d_mutex_unlock();
        if (FAILED(hr))
        {
            WARN("Failed to create wined3d stateblock, hr %#x.\n", hr);
            return hr;
        }
    }

    stateblock->parent_device = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(stateblock->parent_device);

    return D3D_OK;
}

开发者ID:GYGit，项目名称:reactos，代码行数:30，代码来源:stateblock.c

示例2: pixelshader_init

HRESULT pixelshader_init(struct d3d9_pixelshader *shader, struct d3d9_device *device, const DWORD *byte_code)
{
    struct wined3d_shader_desc desc;
    HRESULT hr;

    shader->refcount = 1;
    shader->IDirect3DPixelShader9_iface.lpVtbl = &d3d9_pixelshader_vtbl;

    desc.byte_code = byte_code;
    desc.byte_code_size = ~(size_t)0;

    wined3d_mutex_lock();
    hr = wined3d_shader_create_ps(device->wined3d_device, &desc, shader,
            &d3d9_pixelshader_wined3d_parent_ops, &shader->wined3d_shader);
    wined3d_mutex_unlock();
    if (FAILED(hr))
    {
        WARN("Failed to created wined3d pixel shader, hr %#x.\n", hr);
        return hr;
    }

    shader->parent_device = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(shader->parent_device);

    return D3D_OK;
}

开发者ID:Moteesh，项目名称:wine，代码行数:26，代码来源:shader.c

示例3: stateblock_init

HRESULT stateblock_init(IDirect3DStateBlock9Impl *stateblock, IDirect3DDevice9Impl *device,
        D3DSTATEBLOCKTYPE type, struct wined3d_stateblock *wined3d_stateblock)
{
    HRESULT hr;

    stateblock->lpVtbl = &Direct3DStateBlock9_Vtbl;
    stateblock->ref = 1;

    if (wined3d_stateblock)
    {
        stateblock->wined3d_stateblock = wined3d_stateblock;
    }
    else
    {
        wined3d_mutex_lock();
        hr = IWineD3DDevice_CreateStateBlock(device->WineD3DDevice,
                (WINED3DSTATEBLOCKTYPE)type, &stateblock->wined3d_stateblock);
        wined3d_mutex_unlock();
        if (FAILED(hr))
        {
            WARN("Failed to create wined3d stateblock, hr %#x.\n", hr);
            return hr;
        }
    }

    stateblock->parentDevice = (IDirect3DDevice9Ex *)device;
    IDirect3DDevice9Ex_AddRef(stateblock->parentDevice);

    return D3D_OK;
}

开发者ID:dvdhoo，项目名称:wine，代码行数:30，代码来源:stateblock.c

示例4: IDirect3DSurface9Impl_AddRef

static ULONG WINAPI IDirect3DSurface9Impl_AddRef(IDirect3DSurface9 *iface)
{
    IDirect3DSurface9Impl *This = impl_from_IDirect3DSurface9(iface);

    TRACE("iface %p.\n", iface);

    if (This->forwardReference) {
        /* Forward refcounting */
        TRACE("(%p) : Forwarding to %p\n", This, This->forwardReference);
        return IUnknown_AddRef(This->forwardReference);
    } else {
        /* No container, handle our own refcounting */
        ULONG ref = InterlockedIncrement(&This->ref);

        TRACE("%p increasing refcount to %u.\n", iface, ref);

        if (ref == 1)
        {
            if (This->parentDevice) IDirect3DDevice9Ex_AddRef(This->parentDevice);
            wined3d_mutex_lock();
            wined3d_surface_incref(This->wined3d_surface);
            wined3d_mutex_unlock();
        }

        return ref;
    }

}

开发者ID:johnedmonds，项目名称:wine，代码行数:28，代码来源:surface.c

示例5: pixelshader_init

HRESULT pixelshader_init(struct d3d9_pixelshader *shader, struct d3d9_device *device, const DWORD *byte_code)
{
    struct wined3d_shader_desc desc;
    HRESULT hr;

    shader->refcount = 1;
    shader->IDirect3DPixelShader9_iface.lpVtbl = &d3d9_pixelshader_vtbl;

    desc.byte_code = byte_code;
    desc.byte_code_size = ~(size_t)0;
    desc.format = WINED3D_SHADER_BYTE_CODE_FORMAT_SM1;
    desc.input_signature.element_count = 0;
    desc.output_signature.element_count = 0;
    desc.patch_constant_signature.element_count = 0;
    desc.max_version = 3;

    wined3d_mutex_lock();
    hr = wined3d_shader_create_ps(device->wined3d_device, &desc, shader,
            &d3d9_pixelshader_wined3d_parent_ops, &shader->wined3d_shader);
    wined3d_mutex_unlock();
    if (FAILED(hr))
    {
        WARN("Failed to created wined3d pixel shader, hr %#x.\n", hr);
        return hr;
    }

    shader->parent_device = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(shader->parent_device);

    return D3D_OK;
}

开发者ID:Moteesh，项目名称:reactos，代码行数:31，代码来源:shader.c

示例6: IDirect3DDevice9Impl_CreateVertexShader

/* IDirect3DDevice9 IDirect3DVertexShader9 Methods follow: */
HRESULT WINAPI IDirect3DDevice9Impl_CreateVertexShader(LPDIRECT3DDEVICE9EX iface, CONST DWORD* pFunction, IDirect3DVertexShader9** ppShader) {
    IDirect3DDevice9Impl *This = (IDirect3DDevice9Impl *)iface;
    HRESULT hrc = D3D_OK;
    IDirect3DVertexShader9Impl *object;

    /* Setup a stub object for now */
    object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object));
    TRACE("(%p) : pFunction(%p), ppShader(%p)\n", This, pFunction, ppShader);
    if (NULL == object) {
        FIXME("Allocation of memory failed, returning D3DERR_OUTOFVIDEOMEMORY\n");
        return D3DERR_OUTOFVIDEOMEMORY;
    }

    object->ref = 1;
    object->lpVtbl = &Direct3DVertexShader9_Vtbl;
    EnterCriticalSection(&d3d9_cs);
    hrc= IWineD3DDevice_CreateVertexShader(This->WineD3DDevice, NULL /* declaration */, pFunction, &object->wineD3DVertexShader, (IUnknown *)object);
    LeaveCriticalSection(&d3d9_cs);

    if (FAILED(hrc)) {

        /* free up object */
        FIXME("Call to IWineD3DDevice_CreateVertexShader failed\n");
        HeapFree(GetProcessHeap(), 0, object);
    }else{
        IDirect3DDevice9Ex_AddRef(iface);
        object->parentDevice = iface;
        *ppShader = (IDirect3DVertexShader9 *)object;
        TRACE("(%p) : Created vertex shader %p\n", This, object);
    }

    TRACE("(%p) : returning %p\n", This, *ppShader);
    return hrc;
}

开发者ID:devyn，项目名称:wine，代码行数:35，代码来源:vertexshader.c

示例7: d3d9_surface_AddRef

static ULONG WINAPI d3d9_surface_AddRef(IDirect3DSurface9 *iface)
{
    struct d3d9_surface *surface = impl_from_IDirect3DSurface9(iface);
    ULONG refcount;

    TRACE("iface %p.\n", iface);

    if (surface->texture)
    {
        TRACE("Forwarding to %p.\n", surface->texture);
        return IDirect3DBaseTexture9_AddRef(&surface->texture->IDirect3DBaseTexture9_iface);
    }

    refcount = InterlockedIncrement(&surface->resource.refcount);
    TRACE("%p increasing refcount to %u.\n", iface, refcount);

    if (refcount == 1)
    {
        if (surface->parent_device)
            IDirect3DDevice9Ex_AddRef(surface->parent_device);
        wined3d_mutex_lock();
        if (surface->wined3d_rtv)
            wined3d_rendertarget_view_incref(surface->wined3d_rtv);
        wined3d_surface_incref(surface->wined3d_surface);
        wined3d_mutex_unlock();
    }

    return refcount;
}

开发者ID:CSRedRat，项目名称:reactos-playground，代码行数:29，代码来源:surface.c

示例8: indexbuffer_init

HRESULT indexbuffer_init(IDirect3DIndexBuffer9Impl *buffer, IDirect3DDevice9Impl *device,
        UINT size, DWORD usage, D3DFORMAT format, D3DPOOL pool)
{
    HRESULT hr;

    buffer->lpVtbl = &Direct3DIndexBuffer9_Vtbl;
    buffer->ref = 1;
    buffer->format = wined3dformat_from_d3dformat(format);

    wined3d_mutex_lock();
    hr = IWineD3DDevice_CreateIndexBuffer(device->WineD3DDevice, size,
            usage & WINED3DUSAGE_MASK, (WINED3DPOOL)pool, &buffer->wineD3DIndexBuffer,
            (IUnknown *)buffer, &d3d9_indexbuffer_wined3d_parent_ops);
    wined3d_mutex_unlock();
    if (FAILED(hr))
    {
        WARN("Failed to create wined3d buffer, hr %#x.\n", hr);
        return hr;
    }

    buffer->parentDevice = (IDirect3DDevice9Ex *)device;
    IDirect3DDevice9Ex_AddRef(buffer->parentDevice);

    return D3D_OK;
}

开发者ID:CandyYao，项目名称:VirtualBox-OSE，代码行数:25，代码来源:indexbuffer.c

示例9: d3d9_surface_AddRef

static ULONG WINAPI d3d9_surface_AddRef(IDirect3DSurface9 *iface)
{
    struct d3d9_surface *surface = impl_from_IDirect3DSurface9(iface);
    ULONG refcount;

    TRACE("iface %p.\n", iface);

    if (surface->forwardReference)
    {
        TRACE("Forwarding to %p.\n", surface->forwardReference);
        return IUnknown_AddRef(surface->forwardReference);
    }

    refcount = InterlockedIncrement(&surface->refcount);
    TRACE("%p increasing refcount to %u.\n", iface, refcount);

    if (refcount == 1)
    {
        if (surface->parent_device)
            IDirect3DDevice9Ex_AddRef(surface->parent_device);
        wined3d_mutex_lock();
        wined3d_surface_incref(surface->wined3d_surface);
        wined3d_mutex_unlock();
    }

    return refcount;
}

开发者ID:ElvisTulip，项目名称:vbox，代码行数:27，代码来源:surface.c

示例10: surface_init

HRESULT surface_init(struct d3d9_surface *surface, struct d3d9_device *device, UINT width, UINT height,
        D3DFORMAT format, DWORD flags, DWORD usage, D3DPOOL pool, D3DMULTISAMPLE_TYPE multisample_type,
        DWORD multisample_quality
#ifdef VBOX_WITH_WDDM
        , HANDLE *shared_handle
        , void *pvClientMem
#endif
        )
{
    HRESULT hr;

    surface->IDirect3DSurface9_iface.lpVtbl = &d3d9_surface_vtbl;
    surface->refcount = 1;

    switch (format)
    {
        case D3DFMT_A8R8G8B8:
        case D3DFMT_X8R8G8B8:
        case D3DFMT_R5G6B5:
        case D3DFMT_X1R5G5B5:
        case D3DFMT_A1R5G5B5:
        case D3DFMT_R8G8B8:
            surface->getdc_supported = TRUE;
            break;

        default:
            surface->getdc_supported = FALSE;
            break;
    }

    /* FIXME: Check MAX bounds of MultisampleQuality. */
    if (multisample_quality > 0)
    {
        FIXME("Multisample quality set to %u, substituting 0.\n", multisample_quality);
        multisample_quality = 0;
    }

    wined3d_mutex_lock();
    hr = wined3d_surface_create(device->wined3d_device, width, height, wined3dformat_from_d3dformat(format),
            usage & WINED3DUSAGE_MASK, (enum wined3d_pool)pool, multisample_type, multisample_quality,
            flags, surface, &d3d9_surface_wined3d_parent_ops, &surface->wined3d_surface
#ifdef VBOX_WITH_WDDM
            , shared_handle
            , pvClientMem
#endif
            );
    wined3d_mutex_unlock();
    if (FAILED(hr))
    {
        WARN("Failed to create wined3d surface, hr %#x.\n", hr);
        return hr;
    }

    surface->parent_device = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(surface->parent_device);

    return D3D_OK;
}

开发者ID:ElvisTulip，项目名称:vbox，代码行数:58，代码来源:surface.c

示例11: swapchain_init

HRESULT swapchain_init(IDirect3DSwapChain9Impl *swapchain, IDirect3DDevice9Impl *device,
        D3DPRESENT_PARAMETERS *present_parameters)
{
    struct wined3d_swapchain_desc desc;
    HRESULT hr;

    swapchain->ref = 1;
    swapchain->lpVtbl = &Direct3DSwapChain9_Vtbl;

    desc.backbuffer_width = present_parameters->BackBufferWidth;
    desc.backbuffer_height = present_parameters->BackBufferHeight;
    desc.backbuffer_format = wined3dformat_from_d3dformat(present_parameters->BackBufferFormat);
    desc.backbuffer_count = max(1, present_parameters->BackBufferCount);
    desc.multisample_type = present_parameters->MultiSampleType;
    desc.multisample_quality = present_parameters->MultiSampleQuality;
    desc.swap_effect = present_parameters->SwapEffect;
    desc.device_window = present_parameters->hDeviceWindow;
    desc.windowed = present_parameters->Windowed;
    desc.enable_auto_depth_stencil = present_parameters->EnableAutoDepthStencil;
    desc.auto_depth_stencil_format = wined3dformat_from_d3dformat(present_parameters->AutoDepthStencilFormat);
    desc.flags = present_parameters->Flags;
    desc.refresh_rate = present_parameters->FullScreen_RefreshRateInHz;
    desc.swap_interval = present_parameters->PresentationInterval;
    desc.auto_restore_display_mode = TRUE;

    wined3d_mutex_lock();
    hr = wined3d_swapchain_create(device->wined3d_device, &desc,
            WINED3D_SURFACE_TYPE_OPENGL, swapchain, &d3d9_swapchain_wined3d_parent_ops,
            &swapchain->wined3d_swapchain);
    wined3d_mutex_unlock();

    present_parameters->BackBufferWidth = desc.backbuffer_width;
    present_parameters->BackBufferHeight = desc.backbuffer_height;
    present_parameters->BackBufferFormat = d3dformat_from_wined3dformat(desc.backbuffer_format);
    present_parameters->BackBufferCount = desc.backbuffer_count;
    present_parameters->MultiSampleType = desc.multisample_type;
    present_parameters->MultiSampleQuality = desc.multisample_quality;
    present_parameters->SwapEffect = desc.swap_effect;
    present_parameters->hDeviceWindow = desc.device_window;
    present_parameters->Windowed = desc.windowed;
    present_parameters->EnableAutoDepthStencil = desc.enable_auto_depth_stencil;
    present_parameters->AutoDepthStencilFormat = d3dformat_from_wined3dformat(desc.auto_depth_stencil_format);
    present_parameters->Flags = desc.flags;
    present_parameters->FullScreen_RefreshRateInHz = desc.refresh_rate;
    present_parameters->PresentationInterval = desc.swap_interval;

    if (FAILED(hr))
    {
        WARN("Failed to create wined3d swapchain, hr %#x.\n", hr);
        return hr;
    }

    swapchain->parentDevice = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(swapchain->parentDevice);

    return D3D_OK;
}

开发者ID:klickverbot，项目名称:wine，代码行数:57，代码来源:swapchain.c

示例12: swapchain_init

HRESULT swapchain_init(IDirect3DSwapChain9Impl *swapchain, IDirect3DDevice9Impl *device,
        D3DPRESENT_PARAMETERS *present_parameters)
{
    WINED3DPRESENT_PARAMETERS wined3d_parameters;
    HRESULT hr;

    swapchain->ref = 1;
    swapchain->lpVtbl = &Direct3DSwapChain9_Vtbl;

    wined3d_parameters.BackBufferWidth = present_parameters->BackBufferWidth;
    wined3d_parameters.BackBufferHeight = present_parameters->BackBufferHeight;
    wined3d_parameters.BackBufferFormat = wined3dformat_from_d3dformat(present_parameters->BackBufferFormat);
    wined3d_parameters.BackBufferCount = max(1, present_parameters->BackBufferCount);
    wined3d_parameters.MultiSampleType = present_parameters->MultiSampleType;
    wined3d_parameters.MultiSampleQuality = present_parameters->MultiSampleQuality;
    wined3d_parameters.SwapEffect = present_parameters->SwapEffect;
    wined3d_parameters.hDeviceWindow = present_parameters->hDeviceWindow;
    wined3d_parameters.Windowed = present_parameters->Windowed;
    wined3d_parameters.EnableAutoDepthStencil = present_parameters->EnableAutoDepthStencil;
    wined3d_parameters.AutoDepthStencilFormat = wined3dformat_from_d3dformat(present_parameters->AutoDepthStencilFormat);
    wined3d_parameters.Flags = present_parameters->Flags;
    wined3d_parameters.FullScreen_RefreshRateInHz = present_parameters->FullScreen_RefreshRateInHz;
    wined3d_parameters.PresentationInterval = present_parameters->PresentationInterval;
    wined3d_parameters.AutoRestoreDisplayMode = TRUE;

    wined3d_mutex_lock();
    hr = wined3d_swapchain_create(device->wined3d_device, &wined3d_parameters,
            SURFACE_OPENGL, swapchain, &d3d9_swapchain_wined3d_parent_ops,
            &swapchain->wined3d_swapchain);
    wined3d_mutex_unlock();

    present_parameters->BackBufferWidth = wined3d_parameters.BackBufferWidth;
    present_parameters->BackBufferHeight = wined3d_parameters.BackBufferHeight;
    present_parameters->BackBufferFormat = d3dformat_from_wined3dformat(wined3d_parameters.BackBufferFormat);
    present_parameters->BackBufferCount = wined3d_parameters.BackBufferCount;
    present_parameters->MultiSampleType = wined3d_parameters.MultiSampleType;
    present_parameters->MultiSampleQuality = wined3d_parameters.MultiSampleQuality;
    present_parameters->SwapEffect = wined3d_parameters.SwapEffect;
    present_parameters->hDeviceWindow = wined3d_parameters.hDeviceWindow;
    present_parameters->Windowed = wined3d_parameters.Windowed;
    present_parameters->EnableAutoDepthStencil = wined3d_parameters.EnableAutoDepthStencil;
    present_parameters->AutoDepthStencilFormat = d3dformat_from_wined3dformat(wined3d_parameters.AutoDepthStencilFormat);
    present_parameters->Flags = wined3d_parameters.Flags;
    present_parameters->FullScreen_RefreshRateInHz = wined3d_parameters.FullScreen_RefreshRateInHz;
    present_parameters->PresentationInterval = wined3d_parameters.PresentationInterval;

    if (FAILED(hr))
    {
        WARN("Failed to create wined3d swapchain, hr %#x.\n", hr);
        return hr;
    }

    swapchain->parentDevice = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(swapchain->parentDevice);

    return D3D_OK;
}

开发者ID:HBelusca，项目名称:NasuTek-Odyssey，代码行数:57，代码来源:swapchain.c

示例13: IDirect3DSwapChain9Impl_AddRef

static ULONG WINAPI IDirect3DSwapChain9Impl_AddRef(LPDIRECT3DSWAPCHAIN9 iface) {
    IDirect3DSwapChain9Impl *This = (IDirect3DSwapChain9Impl *)iface;
    ULONG ref = InterlockedIncrement(&This->ref);

    TRACE("%p increasing refcount to %u.\n", iface, ref);

    if(ref == 1 && This->parentDevice) IDirect3DDevice9Ex_AddRef(This->parentDevice);

    return ref;
}

开发者ID:austin987，项目名称:wine，代码行数:10，代码来源:swapchain.c

示例14: surface_init

HRESULT surface_init(IDirect3DSurface9Impl *surface, IDirect3DDevice9Impl *device,
        UINT width, UINT height, D3DFORMAT format, BOOL lockable, BOOL discard, UINT level,
        DWORD usage, D3DPOOL pool, D3DMULTISAMPLE_TYPE multisample_type, DWORD multisample_quality)
{
    DWORD flags = 0;
    HRESULT hr;

    surface->IDirect3DSurface9_iface.lpVtbl = &Direct3DSurface9_Vtbl;
    surface->ref = 1;

    switch (format)
    {
        case D3DFMT_A8R8G8B8:
        case D3DFMT_X8R8G8B8:
        case D3DFMT_R5G6B5:
        case D3DFMT_X1R5G5B5:
        case D3DFMT_A1R5G5B5:
        case D3DFMT_R8G8B8:
            surface->getdc_supported = TRUE;
            break;

        default:
            surface->getdc_supported = FALSE;
            break;
    }

    /* FIXME: Check MAX bounds of MultisampleQuality. */
    if (multisample_quality > 0)
    {
        FIXME("Multisample quality set to %u, substituting 0.\n", multisample_quality);
        multisample_quality = 0;
    }

    if (lockable)
        flags |= WINED3D_SURFACE_MAPPABLE;
    if (discard)
        flags |= WINED3D_SURFACE_DISCARD;

    wined3d_mutex_lock();
    hr = wined3d_surface_create(device->wined3d_device, width, height, wined3dformat_from_d3dformat(format),
            level, usage & WINED3DUSAGE_MASK, (WINED3DPOOL)pool, multisample_type, multisample_quality,
            SURFACE_OPENGL, flags, surface, &d3d9_surface_wined3d_parent_ops, &surface->wined3d_surface);
    wined3d_mutex_unlock();
    if (FAILED(hr))
    {
        WARN("Failed to create wined3d surface, hr %#x.\n", hr);
        return hr;
    }

    surface->parentDevice = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(surface->parentDevice);

    return D3D_OK;
}

开发者ID:pihlaja，项目名称:wine，代码行数:54，代码来源:surface.c

示例15: cubetexture_init

HRESULT cubetexture_init(struct d3d9_texture *texture, struct d3d9_device *device,
        UINT edge_length, UINT levels, DWORD usage, D3DFORMAT format, D3DPOOL pool
#ifdef VBOX_WITH_WDDM
        , HANDLE *shared_handle
        , void **pavClientMem
#endif
        )
{
    struct wined3d_resource_desc desc;
    DWORD surface_flags = 0;
    HRESULT hr;

    texture->IDirect3DBaseTexture9_iface.lpVtbl = (const IDirect3DBaseTexture9Vtbl *)&d3d9_texture_cube_vtbl;
    texture->refcount = 1;

    desc.resource_type = WINED3D_RTYPE_CUBE_TEXTURE;
    desc.format = wined3dformat_from_d3dformat(format);
    desc.multisample_type = WINED3D_MULTISAMPLE_NONE;
    desc.multisample_quality = 0;
    desc.usage = usage & WINED3DUSAGE_MASK;
    desc.pool = pool;
    desc.width = edge_length;
    desc.height = edge_length;
    desc.depth = 1;
    desc.size = 0;

    if (pool != D3DPOOL_DEFAULT || (usage & D3DUSAGE_DYNAMIC))
        surface_flags |= WINED3D_SURFACE_MAPPABLE;

    wined3d_mutex_lock();
    hr = wined3d_texture_create_cube(device->wined3d_device, &desc, levels, surface_flags,
            texture, &d3d9_texture_wined3d_parent_ops, &texture->wined3d_texture
#ifdef VBOX_WITH_WDDM
            , shared_handle
            , pavClientMem
#endif
            );
    wined3d_mutex_unlock();
    if (FAILED(hr))
    {
        WARN("Failed to create wined3d cube texture, hr %#x.\n", hr);
        return hr;
    }

    texture->parent_device = &device->IDirect3DDevice9Ex_iface;
    IDirect3DDevice9Ex_AddRef(texture->parent_device);

    return D3D_OK;
}

开发者ID:afrulbasha，项目名称:virtualbox-org-svn-vbox-trunk，代码行数:49，代码来源:texture.c

示例16: IDirect3DIndexBuffer9Impl_AddRef

static ULONG WINAPI IDirect3DIndexBuffer9Impl_AddRef(LPDIRECT3DINDEXBUFFER9 iface) {
    IDirect3DIndexBuffer9Impl *This = (IDirect3DIndexBuffer9Impl *)iface;
    ULONG ref = InterlockedIncrement(&This->ref);

    TRACE("%p increasing refcount to %u.\n", iface, ref);

    if (ref == 1)
    {
        IDirect3DDevice9Ex_AddRef(This->parentDevice);
        wined3d_mutex_lock();
        IWineD3DBuffer_AddRef(This->wineD3DIndexBuffer);
        wined3d_mutex_unlock();
    }

    return ref;
}

开发者ID:CandyYao，项目名称:VirtualBox-OSE，代码行数:16，代码来源:indexbuffer.c

示例17: IDirect3DCubeTexture9Impl_AddRef

static ULONG WINAPI IDirect3DCubeTexture9Impl_AddRef(LPDIRECT3DCUBETEXTURE9 iface) {
    IDirect3DCubeTexture9Impl *This = (IDirect3DCubeTexture9Impl *)iface;
    ULONG ref = InterlockedIncrement(&This->ref);

    TRACE("%p increasing refcount to %u.\n", iface, ref);

    if (ref == 1)
    {
        IDirect3DDevice9Ex_AddRef(This->parentDevice);
        wined3d_mutex_lock();
        IWineD3DCubeTexture_AddRef(This->wineD3DCubeTexture);
        wined3d_mutex_unlock();
    }

    return ref;
}

开发者ID:CandyYao，项目名称:VirtualBox-OSE，代码行数:16，代码来源:cubetexture.c

示例18: d3d9_texture_3d_AddRef

static ULONG WINAPI d3d9_texture_3d_AddRef(IDirect3DVolumeTexture9 *iface)
{
    struct d3d9_texture *texture = impl_from_IDirect3DVolumeTexture9(iface);
    ULONG ref = InterlockedIncrement(&texture->refcount);

    TRACE("%p increasing refcount to %u.\n", iface, ref);

    if (ref == 1)
    {
        IDirect3DDevice9Ex_AddRef(texture->parent_device);
        wined3d_mutex_lock();
        wined3d_texture_incref(texture->wined3d_texture);
        wined3d_mutex_unlock();
    }

    return ref;
}

开发者ID:Barrell，项目名称:wine，代码行数:17，代码来源:texture.c

示例19: d3d9_vertexbuffer_AddRef

static ULONG WINAPI d3d9_vertexbuffer_AddRef(IDirect3DVertexBuffer9 *iface)
{
    IDirect3DVertexBuffer9Impl *buffer = (IDirect3DVertexBuffer9Impl *)iface;
    ULONG refcount = InterlockedIncrement(&buffer->ref);

    TRACE("%p increasing refcount to %u.\n", iface, refcount);

    if (refcount == 1)
    {
        IDirect3DDevice9Ex_AddRef(buffer->parentDevice);
        wined3d_mutex_lock();
        IWineD3DBuffer_AddRef(buffer->wineD3DVertexBuffer);
        wined3d_mutex_unlock();
    }

    return refcount;
}

开发者ID:wesgarner，项目名称:wine，代码行数:17，代码来源:buffer.c

示例20: IDirect3DVolumeTexture9Impl_AddRef

static ULONG WINAPI IDirect3DVolumeTexture9Impl_AddRef(IDirect3DVolumeTexture9 *iface)
{
    IDirect3DVolumeTexture9Impl *This = impl_from_IDirect3DVolumeTexture9(iface);
    ULONG ref = InterlockedIncrement(&This->ref);

    TRACE("%p increasing refcount to %u.\n", iface, ref);

    if (ref == 1)
    {
        IDirect3DDevice9Ex_AddRef(This->parentDevice);
        wined3d_mutex_lock();
        wined3d_texture_incref(This->wined3d_texture);
        wined3d_mutex_unlock();
    }

    return ref;
}

开发者ID:MichaelMcDonnell，项目名称:wine，代码行数:17，代码来源:volumetexture.c

注：本文中的IDirect3DDevice9Ex_AddRef函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IDirect3DSurface9_Release函数代码示例发布时间：2022-05-30

C++ IDirect3DDevice8_AddRef函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19218|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9995|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8662|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7538|2022-11-06

客服电话

电子邮件

C++ IDirect3DDevice9Ex_AddRef函数代码示例

示例1: stateblock_init

示例2: pixelshader_init

示例3: stateblock_init

示例4: IDirect3DSurface9Impl_AddRef

示例5: pixelshader_init

示例6: IDirect3DDevice9Impl_CreateVertexShader

示例7: d3d9_surface_AddRef

示例8: indexbuffer_init

示例9: d3d9_surface_AddRef

示例10: surface_init

示例11: swapchain_init

示例12: swapchain_init

示例13: IDirect3DSwapChain9Impl_AddRef

示例14: surface_init

示例15: cubetexture_init

示例16: IDirect3DIndexBuffer9Impl_AddRef

示例17: IDirect3DCubeTexture9Impl_AddRef

示例18: d3d9_texture_3d_AddRef

示例19: d3d9_vertexbuffer_AddRef

示例20: IDirect3DVolumeTexture9Impl_AddRef

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

谈谈matlab中的uint8和double（转） - Rege

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053