• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ HeapLocateBuffer函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中HeapLocateBuffer函数的典型用法代码示例。如果您正苦于以下问题:C++ HeapLocateBuffer函数的具体用法?C++ HeapLocateBuffer怎么用?C++ HeapLocateBuffer使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了HeapLocateBuffer函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MemNWritePmuSramMsgBlockKV

BOOLEAN
MemNWritePmuSramMsgBlockKV (
  IN OUT   MEM_NB_BLOCK *NBPtr
  )
{
  UINT16 i;
  UINT16 *ImagePtr;
  LOCATE_HEAP_PTR LocHeap;

  LocHeap.BufferHandle = AMD_MEM_PMU_SRAM_MSG_BLOCK_HANDLE;

  if (HeapLocateBuffer (&LocHeap, &(NBPtr->MemPtr->StdHeader)) != AGESA_SUCCESS) {
    return FALSE; // Could not locate heap for PMU SRAM Message BLock.
  }

  ImagePtr = (UINT16 *) LocHeap.BufferPtr;

  MemNSetBitFieldNb (NBPtr, BFPmuReset, 0);

  // Write the word to D18F2x[B,0]9C_x0005_[27FF:0800]_dct[3:0] (using the broadcast port for all phys at
  // D18F2xB98_dct[MaxDctMstr:0], and using the autoincrement feature).
  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tStart writing PMU SRAM Message Block...\n");

  MemNSetBitFieldNb (NBPtr, RegDctAddlOffset, PMU_FIRMWARE_SRAM_START | DCT_ACCESS_WRITE | DCT_OFFSET_AUTO_INC_EN);

  for (i = 0; i < sizeof (PMU_SRAM_MSG_BLOCK_KV) / sizeof (ImagePtr[0]); i++) {
    MemNSetBitFieldNb (NBPtr, RegDctAddlData, ImagePtr[i]);
    IDS_HDT_CONSOLE (MEM_SETREG, "~F2_9C_%x = %04x\n", PMU_FIRMWARE_SRAM_START + i, ImagePtr[i]);
  }

  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tEnd writing PMU SRAM Message Block!\n");
  MemNSetBitFieldNb (NBPtr, RegDctAddlOffset, 0);

  return TRUE;
}
开发者ID:fishbaoz,项目名称:KaveriPI,代码行数:35,代码来源:mnPmuSramMsgBlockKV.c


示例2: RetrieveDataBlockFromInitReset

STATIC VOID
RetrieveDataBlockFromInitReset (
  IN       FCH_DATA_BLOCK       *FchParams
  )
{
  LOCATE_HEAP_PTR           LocHeapPtr;
  FCH_RESET_DATA_BLOCK      *ResetDb;
  AGESA_STATUS              AgesaStatus;

  LocHeapPtr.BufferHandle = AMD_FCH_RESET_DATA_BLOCK_HANDLE;
  AgesaStatus = HeapLocateBuffer (&LocHeapPtr, FchParams->StdHeader);
  if (AgesaStatus == AGESA_SUCCESS) {
    ASSERT (LocHeapPtr.BufferPtr != NULL);
    ResetDb = (FCH_RESET_DATA_BLOCK *) (LocHeapPtr.BufferPtr - sizeof (ResetDb) + sizeof (UINT32));
    // Override FchParams with contents in ResetDb

    FchParams->Usb.Xhci0Enable              = ResetDb->FchReset.Xhci0Enable;
    FchParams->Usb.Xhci1Enable              = ResetDb->FchReset.Xhci1Enable;
    FchParams->Spi.SpiFastSpeed             = ResetDb->FastSpeed;
    FchParams->Spi.WriteSpeed               = ResetDb->WriteSpeed;
    FchParams->Spi.SpiMode                  = ResetDb->Mode;
    FchParams->Spi.AutoMode                 = ResetDb->AutoMode;
    FchParams->Spi.SpiBurstWrite            = ResetDb->BurstWrite;
    FchParams->Sata.SataMode.Sata6AhciCap   = (UINT8) ResetDb->Sata6AhciCap;
    FchParams->Misc.Cg2Pll                  = ResetDb->Cg2Pll;
    FchParams->Sata.SataMode.SataSetMaxGen2 = ResetDb->SataSetMaxGen2;
    FchParams->Sata.SataMode.SataClkMode    = ResetDb->SataClkMode;
    FchParams->Sata.SataMode.SataModeReg    = ResetDb->SataModeReg;
    FchParams->Sata.SataInternal100Spread   = (UINT8) ResetDb->SataInternal100Spread;
    FchParams->Spi.SpiSpeed                 = ResetDb->SpiSpeed;
    FchParams->Gpp                          = ResetDb->Gpp;
  }
}
开发者ID:B-Rich,项目名称:coreboot,代码行数:33,代码来源:InitEnvDef.c


示例3: MemNInitPmuSramMsgBlockKV

BOOLEAN
MemNInitPmuSramMsgBlockKV (
  IN OUT   MEM_NB_BLOCK *NBPtr
  )
{
  LOCATE_HEAP_PTR LocHeap;
  ALLOCATE_HEAP_PARAMS AllocHeapParams;
  PMU_SRAM_MSG_BLOCK_KV *PmuSramMsgBlockPtr;

  LocHeap.BufferHandle = AMD_MEM_PMU_SRAM_MSG_BLOCK_HANDLE;
  if (HeapLocateBuffer (&LocHeap, &(NBPtr->MemPtr->StdHeader)) == AGESA_SUCCESS) {
    PmuSramMsgBlockPtr = (PMU_SRAM_MSG_BLOCK_KV *) LocHeap.BufferPtr;
  } else {
    // Allocate temporary buffer for PMU SRAM Message Block
    AllocHeapParams.RequestedBufferSize = sizeof (PMU_SRAM_MSG_BLOCK_KV);
    AllocHeapParams.BufferHandle = AMD_MEM_PMU_SRAM_MSG_BLOCK_HANDLE;
    AllocHeapParams.Persist = HEAP_LOCAL_CACHE;

    if (HeapAllocateBuffer (&AllocHeapParams, &(NBPtr->MemPtr->StdHeader)) != AGESA_SUCCESS) {
      return FALSE; // Could not allocate heap for PMU SRAM Message BLock.
    }

    PmuSramMsgBlockPtr = (PMU_SRAM_MSG_BLOCK_KV *) AllocHeapParams.BufferPtr;
  }

  LibAmdMemFill ((VOID *)PmuSramMsgBlockPtr, 0, (UINTN)sizeof (PMU_SRAM_MSG_BLOCK_KV), &(NBPtr->MemPtr->StdHeader));

  return TRUE;
}
开发者ID:fishbaoz,项目名称:KaveriPI,代码行数:29,代码来源:mnPmuSramMsgBlockKV.c


示例4: FchLocateHeapBuffer

//
// Private Function Declaration
//
FCH_DATA_BLOCK*
FchLocateHeapBuffer ( VOID )
{
  LOCATE_HEAP_PTR              LocateHeapPtr;
  AMD_CONFIG_PARAMS            StdHeader;
  AGESA_STATUS                 AgesaStatus;
  EFI_STATUS                   Status;

  Status = gBS->LocateProtocol (
                  &gAmdBufferManagerProtocolGuid,
                  NULL,
                  &mBufferMgr
                  );
  if (EFI_ERROR (Status)) {
    return NULL;
  }
  mDxeBufferManager = mBufferMgr->DxeBufferManager;

  StdHeader = mBufferMgr->StdHeader;
  StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
  LocateHeapPtr.BufferHandle = AMD_FCH_DATA_BLOCK_HANDLE;
  AgesaStatus = HeapLocateBuffer (&LocateHeapPtr, &StdHeader);
  ASSERT (!AgesaStatus);
  return (FCH_DATA_BLOCK *) LocateHeapPtr.BufferPtr;
}
开发者ID:fishbaoz,项目名称:edk2ml,代码行数:28,代码来源:FchDxe.c


示例5: AmdMemS3DatablobRevMatch

/**
 *
 *
 *   This function determines if the revision S3 data blob matches the S3 engine
 *
 *      @param[in]       Storage    - Beginning of the device list.
 *      @param[in]       *StdHeader - Config handle for library and services.
 *
 *      @return          AGESA_STATUS
 *                          - AGESA_FATAL
 *                          - AGESA_SUCCESS
 */
AGESA_STATUS
AmdMemS3DatablobRevMatch (
  IN   VOID              *Storage,
  IN   AMD_CONFIG_PARAMS *StdHeader
  )
{
  S3_MEM_NB_BLOCK *S3NBPtr;
  LOCATE_HEAP_PTR LocHeap;
  DEVICE_BLOCK_HEADER *DeviceList;

  DeviceList = (DEVICE_BLOCK_HEADER *) Storage;

  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
  S3NBPtr = NULL;
  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
    S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
  } else {
    ASSERT (FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
    return AGESA_FATAL;
  }

  if (S3NBPtr[BSP_DIE].S3DatablobRev == DeviceList->Revision) {
    return AGESA_SUCCESS;
  } else {
    ASSERT (FALSE);
    return AGESA_FATAL;
  }
}
开发者ID:fishbaoz,项目名称:CarrizoPI,代码行数:40,代码来源:mfs3.c


示例6: AmdMemDoResume

/**
 *
 *
 *   This function determines if the PSP is present
 *
 *      @param[in]       *StdHeader - Config handle for library and services.
 *
 *      @return          AGESA_STATUS
 *                          - AGESA_FATAL
 *                          - AGESA_SUCCESS
 */
AGESA_STATUS
AmdMemDoResume (
  IN   AMD_CONFIG_PARAMS *StdHeader
  )
{
  S3_MEM_NB_BLOCK *S3NBPtr;
  MEM_NB_BLOCK *NBPtr;
  LOCATE_HEAP_PTR LocHeap;

  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
  S3NBPtr = NULL;
  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
    S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
    NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
  } else {
    ASSERT (FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
    return AGESA_FATAL;
  }

  if (S3NBPtr[BSP_DIE].MemS3PspPlatformSecureBootEn (S3NBPtr[BSP_DIE].NBPtr) == NBPtr->MemRunningOnPsp (NBPtr)) {
    return AGESA_SUCCESS;
  } else {
    return AGESA_FATAL;
  }
}
开发者ID:fishbaoz,项目名称:CarrizoPI,代码行数:36,代码来源:mfs3.c


示例7: MemFS3GetCMsrDeviceRegisterList

/**
 *
 *
 *      This function returns the conditional MSR device register list according
 *      to the register list ID.
 *
 *      @param[in]       *Device - pointer to the CONDITIONAL_PCI_DEVICE_DESCRIPTOR
 *      @param[out]      **RegisterHdr - pointer to the address of the register list
 *      @param[in]       *StdHeader - Config handle for library and services
 *
 *      @return          AGESA_STATUS
 *                          - AGESA_ALERT
 *                          - AGESA_FATAL
 *                          - AGESA_SUCCESS
 *                          - AGESA_WARNING
 */
AGESA_STATUS
MemFS3GetCMsrDeviceRegisterList (
  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR     *Device,
     OUT   CMSR_REGISTER_BLOCK_HEADER            **RegisterHdr,
  IN       AMD_CONFIG_PARAMS                     *StdHeader
  )
{
  AGESA_STATUS RetVal;
  S3_MEM_NB_BLOCK *S3NBPtr;
  VOID *RegisterHeader;
  LOCATE_HEAP_PTR LocHeap;
  AGESA_BUFFER_PARAMS LocBufferParams;

  LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
  LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;


  AGESA_TESTPOINT (TpIfBeforeLocateS3CMsrBuffer, StdHeader);
  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
    S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
  } else {
    ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
    return AGESA_FATAL;
  }
  AGESA_TESTPOINT (TpIfAfterLocateS3CMsrBuffer, StdHeader);

  // NB block has already been constructed by main block.
  // No need to construct it here.
  RetVal = S3NBPtr[BSP_DIE].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
  *RegisterHdr = (CMSR_REGISTER_BLOCK_HEADER *)RegisterHeader;
  return RetVal;
}
开发者ID:0ida,项目名称:coreboot,代码行数:49,代码来源:mfs3.c


示例8: IdsPerfTimestamp

/**
 *
 *  Get Ids Performance analysis table pointer in the AGESA Heap.
 *
 *  @param[in,out] StdHeader    The Pointer of AGESA Header
 *  @param[in] TestPoint  Progress indicator value, see @ref AGESA_TP
 *
 *  @retval AGESA_SUCCESS       Success to get the pointer of Performance analysis Table.
 *  @retval AGESA_ERROR         Fail to get the pointer of Performance analysis Table.
 *  @retval AGESA_UNSUPPORTED   Get an exclude testpoint
 *
 **/
AGESA_STATUS
IdsPerfTimestamp (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
  IN       AGESA_TP TestPoint
   )
{
  AGESA_STATUS status;
  UINT8 Index;
  UINT8 i;
  TP_Perf_STRUCT *PerfTableEntry;
  ALLOCATE_HEAP_PARAMS AllocHeapParams;
  LOCATE_HEAP_PTR LocateHeapStructPtr;
  UINT64 CurrentTsc;


  // Exclude some testpoint which may cause deadloop
  for (i = 0; i < (sizeof (IdsPerfExcludeTp) / sizeof (AGESA_TP)); i++) {
    if (TestPoint == IdsPerfExcludeTp[i]) {
      return AGESA_UNSUPPORTED;
    }
  }
  //if heap is not ready yet, don't invoke locate buffer, or else will cause event log & locate heap dead loop
  if (StdHeader->HeapStatus != HEAP_DO_NOT_EXIST_YET ) {
    LibAmdMsrRead (TSC, &CurrentTsc, StdHeader);

    LocateHeapStructPtr.BufferHandle = IDS_CHECK_POINT_PERF_HANDLE;
    LocateHeapStructPtr.BufferPtr = NULL;

    status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
    if (status == AGESA_SUCCESS) {
      PerfTableEntry = (TP_Perf_STRUCT *) (LocateHeapStructPtr.BufferPtr);
    } else {
      AllocHeapParams.RequestedBufferSize = sizeof (TP_Perf_STRUCT);
      AllocHeapParams.BufferHandle = IDS_CHECK_POINT_PERF_HANDLE;
      AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
      status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
      if (status != AGESA_SUCCESS) {
        return status;
      }
      PerfTableEntry = (TP_Perf_STRUCT *) (AllocHeapParams.BufferPtr);
      LibAmdMemFill (PerfTableEntry, 0, sizeof (TP_Perf_STRUCT), StdHeader);
    }

    Index = PerfTableEntry ->Index;
//TPPerfUnit doesn't need to check, it may used for multiple time, used to check the time
// consumption of each perf measure routine.
    if ((TestPoint != TpPerfUnit)) {
      for (i = 0; i < Index; i++) {
        if ((UINT8) TestPoint == PerfTableEntry ->TP[i].TestPoint) {
          return AGESA_SUCCESS;
        }
      }
    }
    PerfTableEntry ->TP[Index].TestPoint = (UINT8) TestPoint;
    PerfTableEntry ->TP[Index].StartTsc = CurrentTsc;
    PerfTableEntry ->Index = ++Index;
  }
  return AGESA_SUCCESS;
}
开发者ID:Godkey,项目名称:coreboot,代码行数:71,代码来源:IdsPerf.c


示例9: IdsPerfAnalyseTimestamp

/**
 * Output Test Point function .
 *
 *  @param[in,out] StdHeader    The Pointer of Standard Header.
 *
 *  @retval AGESA_SUCCESS       Success to get the pointer of IDS_CHECK_POINT_PERF_HANDLE.
 *  @retval AGESA_ERROR         Fail to get the pointer of IDS_CHECK_POINT_PERF_HANDLE.
 *
 **/
AGESA_STATUS
IdsPerfAnalyseTimestamp (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  )
{
  AGESA_STATUS status;
  LOCATE_HEAP_PTR LocateHeapStructPtr;
  UINT32 TscRateInMhz;
  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
  IDS_CALLOUT_STRUCT IdsCalloutData;
  AGESA_STATUS Status;

  PERFREGBACKUP PerfReg;
  UINT32 CR4reg;
  UINT64 SMsr;

  LocateHeapStructPtr.BufferHandle = IDS_CHECK_POINT_PERF_HANDLE;
  LocateHeapStructPtr.BufferPtr = NULL;
  status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
  if (status != AGESA_SUCCESS) {
    return status;
  }
  GetCpuServicesOfCurrentCore (&FamilySpecificServices, StdHeader);
  FamilySpecificServices->GetTscRate (FamilySpecificServices, &TscRateInMhz, StdHeader);
  ((TP_Perf_STRUCT *) (LocateHeapStructPtr.BufferPtr)) ->TscInMhz = TscRateInMhz;
  ((TP_Perf_STRUCT *) (LocateHeapStructPtr.BufferPtr)) ->Version = IDS_PERF_VERSION;

  IdsCalloutData.IdsNvPtr = NULL;
  IdsCalloutData.StdHeader = *StdHeader;
  IdsCalloutData.Reserved = 0;
  Status = AgesaGetIdsData (IDS_CALLOUT_GET_PERF_BUFFER, &IdsCalloutData);

  //Check if Platform BIOS provide a buffer to copy
  if ((Status == AGESA_SUCCESS) && (IdsCalloutData.Reserved != 0)) {
    LibAmdMemCopy ((VOID *)IdsCalloutData.Reserved, LocateHeapStructPtr.BufferPtr, sizeof (TP_Perf_STRUCT), StdHeader);
  } else {
    //No platform performance buffer provide, use the default HDTOUT output
    if (AmdIdsHdtOutSupport () == FALSE) {
    //Init break point
      IdsPerfSaveReg (&PerfReg, StdHeader);

      LibAmdMsrRead (0xC001100A, (UINT64 *)&SMsr, StdHeader);
      SMsr |= 1;
      LibAmdMsrWrite (0xC001100A, (UINT64 *)&SMsr, StdHeader);

      LibAmdWriteCpuReg (DR2_REG, 0x99cc);
      LibAmdWriteCpuReg (DR7_REG, 0x02000420);

      LibAmdReadCpuReg (CR4_REG, &CR4reg);
      LibAmdWriteCpuReg (CR4_REG, CR4reg | ((UINT32)1 << 3));

      IdsPerfHdtOut (1, (UINT32) (UINT64) LocateHeapStructPtr.BufferPtr, StdHeader);
      IdsPerfRestoreReg (&PerfReg, StdHeader);
    }
  }
  return status;
}
开发者ID:fishbaoz,项目名称:edk2ml,代码行数:66,代码来源:IdsPerf.c


示例10: IdsPerfTimestamp

/**
 *
 *  Get Ids Performance analysis table pointer in the AGESA Heap.
 *
 *  @param[in] LineInFile  ((FILECODE) shift 16)+ Line number
 *  @param[in] Description  ID for Description define idsperf.h
 *  @param[in,out] StdHeader    The Pointer of AGESA Header
 *
 *  @retval AGESA_SUCCESS       Success to get the pointer of Performance analysis Table.
 *  @retval AGESA_ERROR         Fail to get the pointer of Performance analysis Table.
 *  @retval AGESA_UNSUPPORTED   Get an exclude testpoint
 *
 **/
AGESA_STATUS
IdsPerfTimestamp (
  IN       UINT32 LineInFile,
  IN       UINT32 Description,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  )
{
  AGESA_STATUS status;
  UINT32 Index;
  TP_Perf_STRUCT *PerfTableEntry;
  ALLOCATE_HEAP_PARAMS AllocHeapParams;
  LOCATE_HEAP_PTR LocateHeapStructPtr;
  UINT64 TscAtBegining;
  UINT64 TscAtEnd;

  //if heap is not ready yet, don't invoke locate buffer, or else will cause event log & locate heap dead loop
  if (StdHeader->HeapStatus != HEAP_DO_NOT_EXIST_YET ) {
    IdsGetGtsc (&TscAtBegining, StdHeader);

    LocateHeapStructPtr.BufferHandle = IDS_CHECK_POINT_PERF_HANDLE;
    LocateHeapStructPtr.BufferPtr = NULL;
    status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
    if (status == AGESA_SUCCESS) {
      PerfTableEntry = (TP_Perf_STRUCT *) (LocateHeapStructPtr.BufferPtr);
    } else {
      AllocHeapParams.RequestedBufferSize = sizeof (TP_Perf_STRUCT);
      AllocHeapParams.BufferHandle = IDS_CHECK_POINT_PERF_HANDLE;
      AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
      status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
      if (status != AGESA_SUCCESS) {
        return status;
      }
      PerfTableEntry = (TP_Perf_STRUCT *) (AllocHeapParams.BufferPtr);
      LibAmdMemFill (PerfTableEntry, 0, sizeof (TP_Perf_STRUCT), StdHeader);
      PerfTableEntry->Signature = 'FREP';
      PerfTableEntry->Version = IDS_PERF_VERSION;
    }

    Index = PerfTableEntry ->Index;
    if (Index >= MAX_PERFORMANCE_UNIT_NUM - 1) {
      ASSERT (FALSE);
      return AGESA_WARNING;
    }
    // Read GTSC again, so we could calculate the time consumed by this routine
    IdsGetGtsc (&TscAtEnd, StdHeader);

    PerfTableEntry ->TP[Index].LineInFile = LineInFile;
    PerfTableEntry ->TP[Index].Description = Description;
    PerfTableEntry ->TP[Index].StartTsc = TscAtBegining - PerfTableEntry ->TP[MAX_PERFORMANCE_UNIT_NUM - 1].StartTsc;
    PerfTableEntry ->TP[MAX_PERFORMANCE_UNIT_NUM - 1].StartTsc += TscAtEnd - TscAtBegining; // Using the last TP to record the total time consumed by this routine
    PerfTableEntry ->Index = ++Index;
  }
  return AGESA_SUCCESS;
}
开发者ID:fishbaoz,项目名称:CarrizoPI,代码行数:67,代码来源:IdsPerf.c


示例11: IdsPerfTimestamp

/**
 *
 *  Get Ids Performance analysis table pointer in the AGESA Heap.
 *
 *  @param[in] LineInFile  ((FILECODE) shift 16)+ Line number
 *  @param[in] Description  ID for Description define idsperf.h
 *  @param[in,out] StdHeader    The Pointer of AGESA Header
 *
 *  @retval AGESA_SUCCESS       Success to get the pointer of Performance analysis Table.
 *  @retval AGESA_ERROR         Fail to get the pointer of Performance analysis Table.
 *  @retval AGESA_UNSUPPORTED   Get an exclude testpoint
 *
 **/
AGESA_STATUS
IdsPerfTimestamp (
  IN       UINT32 LineInFile,
  IN       UINT32 Description,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  )
{
  AGESA_STATUS status;
  UINT32 Index;
  TP_Perf_STRUCT *PerfTableEntry;
  ALLOCATE_HEAP_PARAMS AllocHeapParams;
  LOCATE_HEAP_PTR LocateHeapStructPtr;
  UINT64 CurrentTsc;

  //if heap is not ready yet, don't invoke locate buffer, or else will cause event log & locate heap dead loop
  if (StdHeader->HeapStatus != HEAP_DO_NOT_EXIST_YET ) {
    LibAmdMsrRead (TSC, &CurrentTsc, StdHeader);

    LocateHeapStructPtr.BufferHandle = IDS_CHECK_POINT_PERF_HANDLE;
    LocateHeapStructPtr.BufferPtr = NULL;
    status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
    if (status == AGESA_SUCCESS) {
      PerfTableEntry = (TP_Perf_STRUCT *) (LocateHeapStructPtr.BufferPtr);
    } else {
      AllocHeapParams.RequestedBufferSize = sizeof (TP_Perf_STRUCT);
      AllocHeapParams.BufferHandle = IDS_CHECK_POINT_PERF_HANDLE;
      AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
      status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
      if (status != AGESA_SUCCESS) {
        return status;
      }
      PerfTableEntry = (TP_Perf_STRUCT *) (AllocHeapParams.BufferPtr);
      LibAmdMemFill (PerfTableEntry, 0, sizeof (TP_Perf_STRUCT), StdHeader);
      PerfTableEntry->Signature = 'FREP';
      PerfTableEntry->Version = IDS_PERF_VERSION;
    }

    Index = PerfTableEntry ->Index;
    if (Index >= MAX_PERFORMANCE_UNIT_NUM) {
      return AGESA_WARNING;
    }
    ASSERT (Index < MAX_PERFORMANCE_UNIT_NUM);
    PerfTableEntry ->TP[Index].LineInFile = LineInFile;
    PerfTableEntry ->TP[Index].Description = Description;
    PerfTableEntry ->TP[Index].StartTsc = CurrentTsc;
    PerfTableEntry ->Index = ++Index;
  }
  return AGESA_SUCCESS;
}
开发者ID:fishbaoz,项目名称:edk2ml,代码行数:62,代码来源:IdsPerf.c


示例12: GnbLocateHeapBuffer

VOID *
GnbLocateHeapBuffer (
  IN      UINT32              Handle,
  IN      AMD_CONFIG_PARAMS   *StdHeader
  )
{
  AGESA_STATUS          Status;
  LOCATE_HEAP_PTR       LocHeapParams;
  LocHeapParams.BufferHandle = Handle;
  Status = HeapLocateBuffer (&LocHeapParams, StdHeader);
  if (Status != AGESA_SUCCESS) {
    return NULL;
  }
  return LocHeapParams.BufferPtr;
}
开发者ID:fishbaoz,项目名称:MullinsPI,代码行数:15,代码来源:GnbLibHeap.c


示例13: AcpiCditHBufferFind

/**
 *
 * Find out the pointer to the BufferHandle which contains
 * Node Topology information
 *
 *    @param[in, out] StdHeader         Standard Head Pointer
 *    @param[in] SocketTopologyPtr      Point to the address of Socket Topology
 *
 */
VOID
STATIC
AcpiCditHBufferFind (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
  IN       UINT8 **SocketTopologyPtr
  )
{
  LOCATE_HEAP_PTR LocateBuffer;

  LocateBuffer.BufferHandle = HOP_COUNT_TABLE_HANDLE;
  if (HeapLocateBuffer (&LocateBuffer, StdHeader) == AGESA_SUCCESS) {
    *SocketTopologyPtr = (UINT8 *) LocateBuffer.BufferPtr;
  }

  return;
}
开发者ID:fishbaoz,项目名称:edk2ml,代码行数:25,代码来源:cpuCdit.c


示例14: F15TnPmNbAfterReset

/**
 * Family 15h Trinity core 0 entry point for performing the necessary steps after
 * a warm reset has occurred.
 *
 * The steps are as follows:
 *
 *   1.    Temp1=D18F5x170[SwNbPstateLoDis].
 *   2.    Temp2=D18F5x170[NbPstateDisOnP0].
 *   3.    Temp3=D18F5x170[NbPstateThreshold].
 *   4.    Temp4=D18F5x170[NbPstateGnbSlowDis].
 *   5.    If MSRC001_0070[NbPstate]=0, go to step 6. If MSRC001_0070[NbPstate]=1, go to step 11.
 *   6.    Write 1 to D18F5x170[NbPstateGnbSlowDis].
 *   7.    Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
 *   8.    Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid, CurNb-
 *         Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
 *   9.    Set D18F5x170[SwNbPstateLoDis]=1.
 *   10.   Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid, CurNb-
 *         Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi]. Go to step 15.
 *   11.   Write 1 to D18F5x170[SwNbPstateLoDis].
 *   12.   Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid, CurNb-
 *         Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
 *   13.   Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
 *   14.   Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid, CurNb-
 *         Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
 *   15.   Set D18F5x170[SwNbPstateLoDis]=Temp1, D18F5x170[NbPstateDisOnP0]=Temp2, D18F5x170[NbP-
 *         stateThreshold]=Temp3, and D18F5x170[NbPstateGnbSlowDis]=Temp4.
 *
 * @param[in]  FamilySpecificServices  The current Family Specific Services.
 * @param[in]  CpuEarlyParamsPtr       Service parameters
 * @param[in]  StdHeader               Config handle for library and services.
 *
 */
VOID
F15TnPmNbAfterReset (
  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
  IN       AMD_CONFIG_PARAMS     *StdHeader
  )
{
  UINT32    Socket;
  UINT32    Module;
  UINT32    Core;
  UINT32    TaskedCore;
  UINT32    Ignored;
  AP_TASK   TaskPtr;
  PCI_ADDR  PciAddress;
  AGESA_STATUS IgnoredSts;
  LOCATE_HEAP_PTR Locate;

  IDS_HDT_CONSOLE (CPU_TRACE, "  F15TnPmNbAfterReset\n");

  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);

  ASSERT (Core == 0);

  if (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, &CpuEarlyParamsPtr->PlatformConfig, StdHeader)) {
    PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
    Locate.BufferHandle = AMD_CPU_NB_PSTATE_FIXUP_HANDLE;
    if (HeapLocateBuffer (&Locate, StdHeader) == AGESA_SUCCESS) {
      LibAmdPciWrite (AccessWidth32, PciAddress, Locate.BufferPtr, StdHeader);
    } else {
      ASSERT (FALSE);
    }
  }

  // Launch one core per node.
  TaskPtr.FuncAddress.PfApTask = F15TnPmNbAfterResetOnCore;
  TaskPtr.DataTransfer.DataSizeInDwords = 0;
  TaskPtr.ExeFlags = WAIT_FOR_CORE;
  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
    if (GetGivenModuleCoreRange (Socket, Module, &TaskedCore, &Ignored, StdHeader)) {
      if (TaskedCore != 0) {
        ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) TaskedCore, &TaskPtr, StdHeader);
      }
    }
  }
  ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr);
}
开发者ID:fishbaoz,项目名称:KaveriPI,代码行数:78,代码来源:cpuF15TnNbAfterReset.c


示例15: S3ScriptGetS3SaveTable

/**
 * Initialize S3 Script framework
 *
 *
 *
 * @param[in]  StdHeader          Pointer to standard header
 * @param[out] S3SaveTable        S3 save table header
 */
AGESA_STATUS
S3ScriptGetS3SaveTable (
  IN       AMD_CONFIG_PARAMS     *StdHeader,
     OUT   S3_SAVE_TABLE_HEADER  **S3SaveTable
  )
{
  AGESA_STATUS          Status;
  LOCATE_HEAP_PTR       LocHeapParams;
  LocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE;
  Status = HeapLocateBuffer (&LocHeapParams, StdHeader);
  if (Status != AGESA_SUCCESS) {
    *S3SaveTable = NULL;
    return Status;
  }
  *S3SaveTable = (S3_SAVE_TABLE_HEADER *) LocHeapParams.BufferPtr;
  return AGESA_SUCCESS;
}
开发者ID:Godkey,项目名称:coreboot,代码行数:25,代码来源:S3SaveState.c


示例16: GetEventLogHeapPointer

/**
 *
 * This function gets the Event Log pointer.
 *
 * It will locate the Event Log on the heap using the heap locate service.  If the Event
 * Log is not located, NULL is returned.
 *
 * @param[out]  EventLog  Pointer to the Event Log, or NULL.
 * @param[in]   StdHeader Our Configuration, for passing to services.
 *
 */
VOID
STATIC
GetEventLogHeapPointer (
     OUT   AGESA_STRUCT_BUFFER **EventLog,
  IN       AMD_CONFIG_PARAMS *StdHeader
  )
{
  LOCATE_HEAP_PTR LocateHeapStruct;

  LocateHeapStruct.BufferHandle = EVENT_LOG_BUFFER_HANDLE;
  LocateHeapStruct.BufferPtr = NULL;
  if ((HeapLocateBuffer (&LocateHeapStruct, StdHeader)) == AGESA_SUCCESS) {
    *EventLog = (AGESA_STRUCT_BUFFER *)LocateHeapStruct.BufferPtr;
  } else {
    *EventLog = NULL;
  }
}
开发者ID:B-Rich,项目名称:coreboot,代码行数:28,代码来源:cpuEventLog.c


示例17: MemNS3ExitSelfRefRegC32

/**
 *
 *
 *   This function stores special case register on the heap.
 *
 *     @param[in,out]  *NBPtr - Pointer to the northbridge block.
 *     @param[in,out]  *StdHeader - Config handle for library and services.
 *     @return         none
 */
VOID
STATIC
MemNS3ExitSelfRefRegC32 (
  IN OUT   MEM_NB_BLOCK *NBPtr,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  )
{
  LOCATE_HEAP_PTR LocateBufferPtr;
  UINT8 i;
  PCI_ADDR PciAddr;
  UINT32 Value;
  UINT8 NodeID;
  UINT8 Offset;
  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;

  Offset = 0;
  PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
  PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
  PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
  PciAddr.Address.Function = 2;
  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
  if (HeapLocateBuffer (&LocateBufferPtr, StdHeader) == AGESA_SUCCESS) {
    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
    // Get the node ID of the target die.
    NodeID = (UINT8) (PciAddr.Address.Device - 24);
    for (i = 0; i < MAX_NODES_SUPPORTED_C32; i ++) {
      if (SpecialHeapHeader[i].Node == NodeID) {
        // Get the offset in the heap for the target die.
        Offset = SpecialHeapHeader[i].Offset;
        break;
      }
    }
    ASSERT (i < MAX_NODES_SUPPORTED_C32);
    // Restore the value one by one in the sequence of the special case register array.
    if (Offset != 0) {
      for (i = 0; i < (sizeof (SpecialCasePCIRegC32) / sizeof (UINT16)); i ++) {
        PciAddr.Address.Register = SpecialCasePCIRegC32[i];
        Value = *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2));
        MemNS3SetCSRNb (AccessS3SaveWidth32, PciAddr, &Value, StdHeader);
      }
    }
  }
}
开发者ID:AdriDlu,项目名称:coreboot,代码行数:52,代码来源:mnS3c32.c


示例18: AmdGetIdsNvTable

/**
 *
 *  Get IDS NV table pointer in the AGESA Heap.
 *
 *  @param[in,out] IdsNvTable   The Pointer of IDS NV Table.
 *  @param[in,out] StdHeader    The Pointer of Standard Header.
 *
 *  @retval AGESA_SUCCESS       Success to get the pointer of NV Table.
 *  @retval AGESA_ERROR         Fail to get the pointer of NV Table.
 **/
AGESA_STATUS
AmdGetIdsNvTable (
  IN OUT   VOID  **IdsNvTable,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  )
{
  AGESA_STATUS status;
  LOCATE_HEAP_PTR LocateHeapStructPtr;
  IDS_CONTROL_STRUCT *IdsCtrlPtr;

  LocateHeapStructPtr.BufferHandle = IDS_CONTROL_HANDLE;
  LocateHeapStructPtr.BufferPtr = NULL;
  status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
  if (status == AGESA_SUCCESS) {
    IdsCtrlPtr = (IDS_CONTROL_STRUCT *) LocateHeapStructPtr.BufferPtr;
    *IdsNvTable = LocateHeapStructPtr.BufferPtr + IdsCtrlPtr->IdsNvTableOffset;
  }
  return status;
}
开发者ID:B-Rich,项目名称:coreboot,代码行数:29,代码来源:IdsLib.c


示例19: AmdIdsNvReader

/**
 *
 * Read IDS NV value in NV table.
 *
 * It searches the table until the Nv Id is found and return the NV value
 * in the table. Otherwise, return IDS_UNSUPPORTED.
 *
 * @param[in] IdsNvId       IDS NV ID
 * @param[in] NvTablePtr    NV Table pointer.
 * @param[in,out] StdHeader    The Pointer of Standard Header.
 *
 * @retval IDS_UNSUPPORTED  NV ID is not found in the table
 *         Other Value      The NV value
 *
 **/
IDS_STATUS
AmdIdsNvReader (
  IN       UINT16 IdsNvId,
  IN       IDS_NV_ITEM *NvTablePtr,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  )
{
  IDS_STATUS Status;
  IDS_NV_ITEM *NvPtr;
  BOOLEAN IgnoreIdsDefault;
  AGESA_STATUS status;
  LOCATE_HEAP_PTR LocateHeapStructPtr;
  IDS_CONTROL_STRUCT *IdsCtrlPtr;

  IgnoreIdsDefault = FALSE;
  Status = IDS_UNSUPPORTED;
  NvPtr = NvTablePtr;

  if (NvPtr != NULL) {
    while (NvPtr->IdsNvId != AGESA_IDS_NV_END) {
      if (NvPtr->IdsNvId == IdsNvId) {
        break;
      } else {
        NvPtr ++;
      }
    }
    if ((NvPtr->IdsNvId != AGESA_IDS_NV_END)) {
      //Get IgnoreIdsDefault from heap
      LocateHeapStructPtr.BufferHandle = IDS_CONTROL_HANDLE;
      LocateHeapStructPtr.BufferPtr = NULL;
      status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
      if (status == AGESA_SUCCESS) {
        IdsCtrlPtr = (IDS_CONTROL_STRUCT *) LocateHeapStructPtr.BufferPtr;
        IgnoreIdsDefault = IdsCtrlPtr->IgnoreIdsDefault;
      }

      if (IgnoreIdsDefault || (NvPtr->IdsNvValue != AGESA_IDS_DFT_VAL)) {
        Status = NvPtr->IdsNvValue;
      }
    }
  }
  return Status;
}
开发者ID:B-Rich,项目名称:coreboot,代码行数:58,代码来源:IdsLib.c


示例20: AmdGetIdsImagebase

AGESA_STATUS
AmdGetIdsImagebase (
  IN OUT   UINT64 *IdsImageBase,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  )
{
  AGESA_STATUS status;
  LOCATE_HEAP_PTR LocateHeapStructPtr;
  IDS_CONTROL_STRUCT *IdsCtrlPtr;

  LocateHeapStructPtr.BufferHandle = IDS_CONTROL_HANDLE;
  LocateHeapStructPtr.BufferPtr = NULL;
  status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
  if (status == AGESA_SUCCESS) {
    IdsCtrlPtr = (IDS_CONTROL_STRUCT *) LocateHeapStructPtr.BufferPtr;
    *IdsImageBase = IdsCtrlPtr->IdsImageBase;
  }
  return status;
}
开发者ID:B-Rich,项目名称:coreboot,代码行数:19,代码来源:IdsLib.c



注:本文中的HeapLocateBuffer函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ HeapReAlloc函数代码示例发布时间:2022-05-30
下一篇:
C++ HeapCreate函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap