本文整理汇总了C++中HT_FREE函数的典型用法代码示例。如果您正苦于以下问题:C++ HT_FREE函数的具体用法?C++ HT_FREE怎么用?C++ HT_FREE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了HT_FREE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: HTMuxProtocol_delete
PUBLIC BOOL HTMuxProtocol_delete (HTMuxChannel * muxch, HTProtocolId pid)
{
if (muxch && muxch->protocols) {
HTList * cur = muxch->protocols;
HTMuxProtocol * pres;
while ((pres = (HTMuxProtocol *) HTList_nextObject(cur))) {
if (pres->pid == pid) {
HTList_removeObject(muxch->protocols, pres);
HT_FREE(pres);
return YES;
}
}
}
return NO;
}
开发者ID:svagionitis,项目名称:libwww,代码行数:15,代码来源:HTMuxCh.c
示例2: HTRuleFilter
/*
** Rule Translation BEFORE Filter
** ------------------------------
** If we have a set of rules loaded (see the Rule manager) then check
** before each request whether how that should be translated. The trick
** is that a parent anchor has a "address" which is the part from the URL
** we used when we created the anchor. However, it also have a "physical
** address" which is the place we are actually going to look for the
** resource. Hence this filter translates the physical address
** (if any translations are found)
*/
PUBLIC int HTRuleFilter (HTRequest * request, void * param, int mode)
{
HTList * list = HTRule_global();
HTParentAnchor * anchor = HTRequest_anchor(request);
char * addr = HTAnchor_physical(anchor);
char * physical = HTRule_translate(list, addr, NO);
if (!physical) {
HTRequest_addError(request, ERR_FATAL, NO, HTERR_FORBIDDEN,
NULL, 0, "HTRuleFilter");
return HT_ERROR;
}
HTAnchor_setPhysical(anchor, physical);
HT_FREE(physical);
return HT_OK;
}
开发者ID:svagionitis,项目名称:libwww,代码行数:26,代码来源:HTFilter.c
示例3: HTextImp_delete
PUBLIC BOOL HTextImp_delete (HTextImp * me)
{
if (me) {
/*
** Note that we do not call the delete method on the app
** HText object as this normally stays around after the
** request has been deleted and certainly it should be
** deleted by the app and not libwww
*/
HT_FREE(me);
return YES;
}
return NO;
}
开发者ID:stefanhusmann,项目名称:Amaya,代码行数:15,代码来源:HText.c
示例4: HTBind_getAnchorBindings
/*
** Use the set of bindings to find the combination of language,
** media type and encoding of a given object. This information can either be
** stored in the anchor obejct or in the response object depending on which
** function is called.
**
** We comprise here as bindings only can have one language and one encoding.
** If more than one suffix is found they are all searched. The last suffix
** has highest priority, the first one lowest. See also HTBind_getFormat()
*/
PUBLIC BOOL HTBind_getAnchorBindings (HTParentAnchor * anchor)
{
BOOL status = NO;
double quality=1.0; /* @@@ Should we add this into the anchor? */
if (anchor) {
char *addr = HTAnchor_address((HTAnchor *) anchor);
char *path = HTParse(addr, "", PARSE_PATH+PARSE_PUNCTUATION);
char *file;
char *end;
if ((end = strchr(path, ';')) || (end = strchr(path, '?')) ||
(end = strchr(path, '#')))
*end = '\0';
if ((file = strrchr(path, '/'))) {
HTFormat format = NULL;
HTEncoding encoding = NULL;
HTEncoding transfer = NULL;
HTLanguage language = NULL;
HTTRACE(BIND_TRACE, "Anchor...... Get bindings for `%s\'\n" _ path);
status = HTBind_getFormat(file, &format, &encoding, &transfer,
&language, &quality);
if (status) {
HTAnchor_setFormat(anchor, format);
HTAnchor_setContentTransferEncoding(anchor, transfer);
HTAnchor_deleteEncodingAll(anchor);
HTAnchor_addEncoding(anchor, encoding);
HTAnchor_deleteLanguageAll(anchor);
HTAnchor_addLanguage(anchor, language);
}
}
HT_FREE(addr);
HT_FREE(path);
}
return status;
}
开发者ID:Hiroyuki-Nagata,项目名称:libwww,代码行数:46,代码来源:HTBind.c
示例5: CSParse_put_block
PRIVATE int CSParse_put_block (HTStream * me, const char * b, int l)
{
if (PICS_TRACE) {
char * ptr;
if ((ptr = (char *) HT_MALLOC(l+1)) == NULL)
HT_OUTOFMEM("diagnostic buffer");
strncpy(ptr, b, l);
ptr[l] = 0;
HTTRACE(PICS_TRACE, "PICS: parser %p parsing block \"%s\"\n" _ me->pCSParse _ ptr);
HT_FREE(ptr);
}
if (CSParse_parseChunk(me->pCSParse, b, l, 0) == CSDoMore_error)
return HT_ERROR;
return HT_OK;
}
开发者ID:Rjoydip,项目名称:libwww,代码行数:15,代码来源:CSStream.c
示例6: HTAA_findElement
/*
** Find AA Element
** ---------------
** Seaches the set of authentication information bases for a match
** In order to find an anode we do the following:
**
** 1) Find the right auth base
** 2) See if there is a realm match
** 3) See if there is a template match for URL
**
** Return the node found else NULL which means that we don't have any
** authentication information to hook on to this request or response
*/
PRIVATE HTAAElement * HTAA_findElement (BOOL proxy_access,
const char * realm, const char * url)
{
HTUTree * tree;
if (!url) {
HTTRACE(AUTH_TRACE, "Auth Engine. Bad argument\n");
return NULL;
}
HTTRACE(AUTH_TRACE, "Auth Engine. Looking up `%s'\n" _ url);
/* Find an existing URL Tree for this URL (if any) */
{
char * host = HTParse(url, "", PARSE_HOST);
char * colon = strchr(host, ':');
int port = DEFAULT_PORT;
if (colon ) {
*(colon++) = '\0'; /* Chop off port number */
port = atoi(colon);
}
tree = HTUTree_find(proxy_access ? AA_PROXY_TREE : AA_TREE, host,port);
HT_FREE(host);
if (!tree) {
HTTRACE(AUTH_TRACE, "Auth Engine. No information\n");
return NULL;
}
}
/* Find a matching AA element (if any) */
{
char * path = HTParse(url, "", PARSE_PATH | PARSE_PUNCTUATION);
HTAAElement *element = (HTAAElement*)HTUTree_findNode(tree,realm,path);
HT_FREE(path);
return element;
}
return NULL;
}
开发者ID:ChatanW,项目名称:WebDaM,代码行数:49,代码来源:HTAAUtil.c
示例7: HTTmpAnchor
/*
** Creates a temporary anchor that doesn't exist
*/
PUBLIC HTParentAnchor * HTTmpAnchor (HTUserProfile * up)
{
static int offset = 0; /* Just keep counting... */
HTParentAnchor * htpa = NULL;
time_t t = time(NULL);
char * tmpfile = HTGetTmpFileName(HTUserProfile_tmp(up));
char * tmpurl = HTParse(tmpfile, "file:", PARSE_ALL);
if (tmpfile && tmpurl && t >= 0) {
char * result;
if (!(result = (char *) HT_MALLOC(strlen(tmpurl)+20)))
HT_OUTOFMEM("HTTmpAnchor");
#ifdef HAVE_LONG_TIME_T
sprintf(result, "%s.%ld.%d", tmpurl, t, offset++);
#else
sprintf(result, "%s.%d.%d", tmpurl, t, offset++);
#endif
HTTRACE(APP_TRACE, "Tmp Anchor.. With location `%s\'\n" _ result);
htpa = HTAnchor_parent(HTAnchor_findAddress(result));
HT_FREE(result);
}
HT_FREE(tmpfile);
HT_FREE(tmpurl);
return htpa;
}
开发者ID:ChatanW,项目名称:WebDaM,代码行数:27,代码来源:HTHome.c
示例8: HTNewsCache_update
PRIVATE BOOL HTNewsCache_update (HTRequest * request,
const char * url, HTArray * array)
{
HTUTree * tree = NULL;
if (request && url) {
char * newshost = NULL;
if (!strncasecomp(url, "news:", 5)) {
HTUserProfile * up = HTRequest_userProfile(request);
StrAllocCopy(newshost, HTUserProfile_news(up));
} else if (!strncasecomp(url, "nntp:", 5)) {
newshost = HTParse(url, "", PARSE_HOST);
}
/*
** If the news server was found then update the data entry. Otherwise
** create a new entry
*/
if (newshost) {
char * colon = strchr(newshost, ':');
int port = NEWS_PORT;
if (colon ) {
*(colon++) = '\0'; /* Chop off port number */
port = atoi(colon);
}
tree = HTUTree_new(NEWS_TREE, newshost, port, HTNewsCache_delete);
HT_FREE(newshost);
if (!tree) {
HTTRACE(PROT_TRACE, "News Cache.. Can't create tree\n");
return NO;
}
/* Add new cache information to the tree */
{
HTNewsCache * element = NULL;
BOOL status;
if ((element=(HTNewsCache *) HTUTree_findNode(tree, "", "/"))){
element->cache = array;
status = YES;
} else {
element = HTNewsCache_new(url, array);
status = HTUTree_addNode(tree, "", "/", element);
}
return status;
}
}
}
return NO;
}
开发者ID:Hiroyuki-Nagata,项目名称:libwww,代码行数:48,代码来源:HTNewsLs.c
示例9: HTInfoFilter
/*
** Error and Information AFTER filter
** ----------------------------------
** It checks the status code from a request and generates an
** error/information message if required.
*/
PUBLIC int HTInfoFilter (HTRequest * request, HTResponse * response,
void * param, int status)
{
HTParentAnchor * anchor = HTRequest_anchor(request);
char * uri = HTAnchor_address((HTAnchor*) anchor);
switch (status) {
case HT_RETRY: {
HTAlertCallback *cbf = HTAlert_find(HT_A_MESSAGE);
if (cbf) (*cbf)(request, HT_A_MESSAGE, HT_MSG_NULL, NULL,
HTRequest_error(request), NULL);
HTTRACE(PROT_TRACE, "Load End.... NOT AVAILABLE, RETRY AT %ld\n" _
HTResponse_retryTime(response));
}
break;
case HT_NO_DATA:
{
/*
** The document was empty
*/
HTAlertCallback *cbf = HTAlert_find(HT_A_MESSAGE);
if (cbf) (*cbf)(request, HT_A_MESSAGE, HT_MSG_NULL, NULL,
HTRequest_error(request), NULL);
HTTRACE(PROT_TRACE, "Load End.... EMPTY: No content `%s\'\n" _
uri ? uri : "<UNKNOWN>");
break;
}
case HT_LOADED:
HTTRACE(PROT_TRACE, "Load End.... OK: `%s\'\n" _ uri);
break;
default:
{
/*
** See if we have a function registered for outputting errors.
** If so then call it and present the message to the user
*/
HTAlertCallback *cbf = HTAlert_find(HT_A_MESSAGE);
if (cbf) (*cbf)(request, HT_A_MESSAGE, HT_MSG_NULL, NULL,
HTRequest_error(request), NULL);
HTTRACE(PROT_TRACE, "Load End.... Request ended with code %d\n" _ status);
break;
}
}
HT_FREE(uri);
return HT_OK;
}
开发者ID:svagionitis,项目名称:libwww,代码行数:54,代码来源:HTFilter.c
示例10: HTList_removeFirstObject
PUBLIC void * HTList_removeFirstObject (HTList * me)
{
if (me && me->next) {
HTList * prevNode;
void *firstObject;
while (me->next) {
prevNode = me;
me = me->next;
}
firstObject = me->object;
prevNode->next = NULL;
HT_FREE(me);
return firstObject;
} else /* Empty list */
return NULL;
}
开发者ID:stefanhusmann,项目名称:Amaya,代码行数:16,代码来源:HTList.c
示例11: HTList_removeObject
PUBLIC BOOL HTList_removeObject (HTList * me, void * oldObject)
{
if (me) {
HTList *previous;
while (me->next) {
previous = me;
me = me->next;
if (me->object == oldObject) {
previous->next = me->next;
HT_FREE(me);
return YES; /* Success */
}
}
}
return NO; /* object not found or NULL list */
}
开发者ID:stefanhusmann,项目名称:Amaya,代码行数:16,代码来源:HTList.c
示例12: HTCookieHolder_delete
PRIVATE BOOL HTCookieHolder_delete (HTCookieHolder * me)
{
if (me) {
if (me->cookies) {
HTList * cookies = me->cookies;
HTCookie * cookie;
while ((cookie = (HTCookie *) HTList_nextObject(cookies)))
HTCookie_delete(cookie);
HTList_delete(me->cookies);
}
HTList_removeObject(cookie_holder, me);
HT_FREE(me);
return YES;
}
return NO;
}
开发者ID:Rjoydip,项目名称:libwww,代码行数:16,代码来源:HTCookie.c
示例13: HTMIME_free
/* Free a stream object
** --------------------
*/
PRIVATE int HTMIME_free (HTStream * me)
{
int status = HT_OK;
if (!me->transparent)
if (_stream2dispatchParsers(me) == HT_OK)
pumpData(me);
if (me->target) {
if ((status = (*me->target->isa->_free)(me->target))==HT_WOULD_BLOCK)
return HT_WOULD_BLOCK;
}
HTTRACE(PROT_TRACE, "MIME........ FREEING....\n");
HTChunk_delete(me->token);
HTChunk_delete(me->value);
HT_FREE(me);
return status;
}
开发者ID:BackupTheBerlios,项目名称:texlive,代码行数:19,代码来源:HTMIME.c
示例14: HTAlertCall_delete
/* HTAlertCall_delete
** ------------------
** Unregister a call back function from a list
*/
PUBLIC BOOL HTAlertCall_delete (HTList * list, HTAlertCallback *cbf)
{
HTTRACE(CORE_TRACE, "Alert Call.. Delete Alert Handler %p\n" _ (void *) cbf);
if (list && cbf) {
HTList *cur = list;
HTAlert *pres;
while ((pres = (HTAlert *) HTList_nextObject(cur))) {
if (pres->cbf == cbf) {
HTList_removeObject(list, (void *) pres);
HT_FREE(pres);
return YES;
}
}
}
return NO;
}
开发者ID:stefanhusmann,项目名称:Amaya,代码行数:20,代码来源:HTAlert.c
示例15: UserProgress
PUBLIC BOOL UserProgress (HTRequest * request, HTAlertOpcode op,
int msgnum, const char * dfault, void * input,
HTAlertPar * reply)
{
char * msg = HTDialog_progressMessage(request, op, msgnum, dfault, input);
CRequest * req = (CRequest *) HTRequest_context(request);
ASSERT(request != NULL);
ASSERT(req != NULL);
CProgressCtrl * progress = req->GetProgressBar();
switch (op) {
case HT_PROG_READ:
{
long cl = HTAnchor_length(HTRequest_anchor(request));
if (cl > 0) {
long b_read = HTRequest_bodyRead(request);
double pro = (double) b_read/cl*100;
progress->SetPos((int) pro);
}
}
break;
case HT_PROG_WRITE:
{
long cl = HTAnchor_length(HTRequest_entityAnchor(request));
if (cl > 0) {
long b_written = HTRequest_bodyWritten(request);
double pro = (double) b_written/cl*100;
progress->SetPos((int) pro);
}
}
break;
}
// Update pane 0 of the status bar
if (msg) {
CWinComDoc * doc = req->m_pDoc;
if (doc) {
POSITION pos = doc->GetFirstViewPosition();
CView * view = doc->GetNextView( pos );
CMainFrame * mainframe = (CMainFrame *) view->GetParentFrame();
mainframe->m_wndStatusBar.SetPaneText(ID_SEPARATOR, msg);
}
HT_FREE(msg);
}
return YES;
}
开发者ID:Hiroyuki-Nagata,项目名称:libwww,代码行数:47,代码来源:UserParameters.cpp
示例16: HTDNS_deleteAll
/* HTDNS_deleteAll
** ---------------
** Destroys the cache completely
*/
PUBLIC BOOL HTDNS_deleteAll (void)
{
int cnt;
HTList *cur;
if (!CacheTable) return NO;
for (cnt=0; cnt<HT_M_HASH_SIZE; cnt++) {
if ((cur = CacheTable[cnt])) {
HTdns *pres;
while ((pres = (HTdns *) HTList_nextObject(cur)) != NULL)
free_object(pres);
}
HTList_delete(CacheTable[cnt]);
CacheTable[cnt] = NULL;
}
HT_FREE(CacheTable);
return YES;
}
开发者ID:BackupTheBerlios,项目名称:texlive,代码行数:21,代码来源:HTDNS.c
示例17: HTMuxChannel_deleteAll
PUBLIC BOOL HTMuxChannel_deleteAll (void)
{
if (muxchs) {
HTList * cur;
int cnt;
for (cnt=0; cnt<HOST_HASH_SIZE; cnt++) {
if ((cur = muxchs[cnt])) {
HTMuxChannel * pres;
while ((pres = (HTMuxChannel *) HTList_nextObject(cur)))
channel_delete(pres);
}
HTList_delete(muxchs[cnt]);
}
HT_FREE(muxchs);
}
return YES;
}
开发者ID:svagionitis,项目名称:libwww,代码行数:17,代码来源:HTMuxCh.c
示例18: foundLink
PRIVATE void foundLink (HText * text,
int element_number, int attribute_number,
HTChildAnchor * anchor,
const BOOL * present, const char ** value)
{
if (anchor) {
/*
** Find out which link we got. The anchor we are passed is
** a child anchor of the anchor we are current parsing. We
** have to go from this child anchor to the actual destination.
*/
HTAnchor * dest = HTAnchor_followMainLink((HTAnchor *) anchor);
char * address = HTAnchor_address(dest);
HTPrint("Found link `%s\'\n", address);
HT_FREE(address);
}
}
开发者ID:ChatanW,项目名称:WebDaM,代码行数:17,代码来源:showlinks.c
示例19: HTUseProxyFilter
/*
** Retry through Proxy AFTER Filter
** --------------------------------
** This filter handles a 305 Use Proxy response and retries the request
** through the proxy
*/
PUBLIC int HTUseProxyFilter (HTRequest * request, HTResponse * response,
void * param, int status)
{
HTAlertCallback * cbf = HTAlert_find(HT_A_CONFIRM);
HTAnchor * proxy_anchor = HTResponse_redirection(response);
if (!proxy_anchor) {
HTTRACE(PROT_TRACE, "Use Proxy... No proxy location\n");
return HT_OK;
}
/*
** Add the proxy to the list. Assume HTTP access method only!
** Because evil servers may rediret the client to an untrusted
** proxy, we can only accept redirects for this particular
** server. Also, we do not know whether this is for HTTP or all
** other requests as well
*/
if ((cbf && (*cbf)(request, HT_A_CONFIRM, HT_MSG_PROXY, NULL,NULL,NULL))) {
char * addr = HTAnchor_address(proxy_anchor);
HTProxy_add("http", addr);
HT_FREE(addr);
/*
** Start new request through the proxy if we haven't reached the max
** number of redirections for this request
*/
if (HTRequest_doRetry(request)) {
HTLoadAnchor(proxy_anchor, request);
} else {
HTRequest_addError(request, ERR_FATAL, NO, HTERR_MAX_REDIRECT,
NULL, 0, "HTRedirectFilter");
}
/*
** By returning HT_ERROR we make sure that this is the last handler to be
** called. We do this as we don't want any other filter to delete the
** request object now when we have just started a new one ourselves
*/
return HT_ERROR;
} else {
HTRequest_addError(request, ERR_FATAL, NO, HTERR_NO_AUTO_PROXY,
NULL, 0, "HTUseProxyFilter");
return HT_OK;
}
}
开发者ID:svagionitis,项目名称:libwww,代码行数:52,代码来源:HTFilter.c
示例20: HTChannel_deleteAll
/* HTChannel_deleteAll
** -------------------
** Destroys all channels. This is called by HTLibTerminate(0
*/
PUBLIC BOOL HTChannel_deleteAll (void)
{
if (channels) {
HTList * cur;
int cnt;
for (cnt=0; cnt<HT_M_HASH_SIZE; cnt++) {
if ((cur = channels[cnt])) {
HTChannel * pres;
while ((pres = (HTChannel *) HTList_nextObject(cur)) != NULL)
free_channel(pres);
}
HTList_delete(channels[cnt]);
}
HT_FREE(channels);
}
return YES;
}
开发者ID:boatgm,项目名称:urchin,代码行数:21,代码来源:HTChannl.c
注:本文中的HT_FREE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论