本文整理汇总了C++中HOSTAPD_DEBUG函数的典型用法代码示例。如果您正苦于以下问题:C++ HOSTAPD_DEBUG函数的具体用法?C++ HOSTAPD_DEBUG怎么用?C++ HOSTAPD_DEBUG使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了HOSTAPD_DEBUG函数的14个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: handle_tx_callback
static void handle_tx_callback(hostapd *hapd, char *buf, size_t len, int ok)
{
struct ieee80211_hdr *hdr;
u16 fc, type, stype;
hdr = (struct ieee80211_hdr *) buf;
fc = le_to_host16(hdr->frame_control);
type = WLAN_FC_GET_TYPE(fc);
stype = WLAN_FC_GET_STYPE(fc);
switch (type) {
case WLAN_FC_TYPE_MGMT:
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"MGMT (TX callback) %s\n", ok ? "ACK" : "fail");
ieee802_11_mgmt_cb(hapd, buf, len, stype, ok);
break;
case WLAN_FC_TYPE_CTRL:
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"CTRL (TX callback) %s\n", ok ? "ACK" : "fail");
break;
case WLAN_FC_TYPE_DATA:
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"DATA (TX callback) %s\n", ok ? "ACK" : "fail");
/* TODO: could replace TXExc counter hack with kernel driver
* in data polling for inactivity check with the new TX
* callback.. */
/* handle_data_cb(hapd, buf, len, stype, ok); */
break;
default:
printf("unknown TX callback frame type %d\n", type);
break;
}
}
开发者ID:BackupTheBerlios,项目名称:wl530g-svn,代码行数:33,代码来源:receive.c
示例2: rsn_preauth_receive
static void rsn_preauth_receive(void *ctx, const u8 *src_addr,
const u8 *buf, size_t len)
{
struct rsn_preauth_interface *piface = ctx;
struct hostapd_data *hapd = piface->hapd;
struct ieee802_1x_hdr *hdr;
struct sta_info *sta;
struct l2_ethhdr *ethhdr;
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: receive pre-auth packet "
"from interface '%s'\n", piface->ifname);
if (len < sizeof(*ethhdr) + sizeof(*hdr)) {
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: too short pre-auth "
"packet (len=%lu)\n", (unsigned long) len);
return;
}
ethhdr = (struct l2_ethhdr *) buf;
hdr = (struct ieee802_1x_hdr *) (ethhdr + 1);
if (memcmp(ethhdr->h_dest, hapd->own_addr, ETH_ALEN) != 0) {
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: pre-auth for "
"foreign address " MACSTR "\n",
MAC2STR(ethhdr->h_dest));
return;
}
sta = ap_get_sta(hapd, ethhdr->h_source);
if (sta && (sta->flags & WLAN_STA_ASSOC)) {
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: pre-auth for "
"already association STA " MACSTR "\n",
MAC2STR(sta->addr));
return;
}
if (!sta && hdr->type == IEEE802_1X_TYPE_EAPOL_START) {
sta = ap_sta_add(hapd, ethhdr->h_source);
if (sta == NULL)
return;
sta->flags = WLAN_STA_PREAUTH;
ieee802_1x_new_station(hapd, sta);
if (sta->eapol_sm == NULL) {
ap_free_sta(hapd, sta);
sta = NULL;
} else {
sta->eapol_sm->radius_identifier = -1;
sta->eapol_sm->portValid = TRUE;
sta->eapol_sm->flags |= EAPOL_SM_PREAUTH;
}
}
if (sta == NULL)
return;
sta->preauth_iface = piface;
ieee802_1x_receive(hapd, ethhdr->h_source, (u8 *) (ethhdr + 1),
len - sizeof(*ethhdr));
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:56,代码来源:preauth.c
示例3: rsn_preauth_send
void rsn_preauth_send(struct hostapd_data *hapd, struct sta_info *sta,
u8 *buf, size_t len)
{
struct rsn_preauth_interface *piface;
struct l2_ethhdr *ethhdr;
piface = hapd->preauth_iface;
while (piface) {
if (piface == sta->preauth_iface)
break;
piface = piface->next;
}
if (piface == NULL) {
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: Could not find "
"pre-authentication interface for " MACSTR "\n",
MAC2STR(sta->addr));
return;
}
ethhdr = malloc(sizeof(*ethhdr) + len);
if (ethhdr == NULL)
return;
memcpy(ethhdr->h_dest, sta->addr, ETH_ALEN);
memcpy(ethhdr->h_source, hapd->own_addr, ETH_ALEN);
ethhdr->h_proto = htons(ETH_P_PREAUTH);
memcpy(ethhdr + 1, buf, len);
if (l2_packet_send(piface->l2, sta->addr, ETH_P_PREAUTH, (u8 *) ethhdr,
sizeof(*ethhdr) + len) < 0) {
printf("Failed to send preauth packet using l2_packet_send\n");
}
free(ethhdr);
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:35,代码来源:preauth.c
示例4: rsn_preauth_iface_add
static int rsn_preauth_iface_add(struct hostapd_data *hapd, const char *ifname)
{
struct rsn_preauth_interface *piface;
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN pre-auth interface '%s'\n",
ifname);
piface = wpa_zalloc(sizeof(*piface));
if (piface == NULL)
return -1;
piface->hapd = hapd;
piface->ifname = strdup(ifname);
if (piface->ifname == NULL) {
goto fail1;
}
piface->l2 = l2_packet_init(piface->ifname, NULL, ETH_P_PREAUTH,
rsn_preauth_receive, piface, 1);
if (piface->l2 == NULL) {
printf("Failed to open register layer 2 access to "
"ETH_P_PREAUTH\n");
goto fail2;
}
piface->next = hapd->preauth_iface;
hapd->preauth_iface = piface;
return 0;
fail2:
free(piface->ifname);
fail1:
free(piface);
return -1;
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:35,代码来源:preauth.c
示例5: hostapd_acl_expire_queries
static void hostapd_acl_expire_queries(struct hostapd_data *hapd, time_t now)
{
struct hostapd_acl_query_data *prev, *entry, *tmp;
prev = NULL;
entry = hapd->acl_queries;
while (entry) {
if (now - entry->timestamp > RADIUS_ACL_TIMEOUT) {
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"ACL query for " MACSTR
" has expired.\n", MAC2STR(entry->addr));
if (prev)
prev->next = entry->next;
else
hapd->acl_queries = entry->next;
tmp = entry;
entry = entry->next;
hostapd_acl_query_free(tmp);
continue;
}
prev = entry;
entry = entry->next;
}
}
开发者ID:jameshilliard,项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5,代码行数:27,代码来源:ieee802_11_auth.c
示例6: radius_client_retransmit
static int radius_client_retransmit(hostapd *hapd,
struct radius_msg_list *entry, time_t now)
{
int s;
if (entry->msg_type == RADIUS_ACCT)
s = hapd->radius->acct_serv_sock;
else
s = hapd->radius->auth_serv_sock;
/* retransmit; remove entry if too many attempts */
entry->attempts++;
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "Resending RADIUS message (id=%d)"
"\n", entry->msg->hdr->identifier);
if (send(s, entry->msg->buf, entry->msg->buf_used, 0) < 0)
perror("send[RADIUS]");
entry->next_try = now + entry->next_wait;
entry->next_wait *= 2;
if (entry->next_wait > RADIUS_CLIENT_MAX_WAIT)
entry->next_wait = RADIUS_CLIENT_MAX_WAIT;
if (entry->attempts >= RADIUS_CLIENT_MAX_RETRIES) {
printf("Removing un-ACKed RADIUS message due to too many "
"failed retransmit attempts\n");
return 1;
}
return 0;
}
开发者ID:BackupTheBerlios,项目名称:wl530g-svn,代码行数:30,代码来源:radius_client.c
示例7: hostapd_acl_expire_cache
static void hostapd_acl_expire_cache(hostapd *hapd, time_t now)
{
struct hostapd_cached_radius_acl *prev, *entry, *tmp;
prev = NULL;
entry = hapd->acl_cache;
while (entry) {
if (now - entry->timestamp > RADIUS_ACL_TIMEOUT) {
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"Cached ACL entry for " MACSTR
" has expired.\n", MAC2STR(entry->addr));
if (prev)
prev->next = entry->next;
else
hapd->acl_cache = entry->next;
tmp = entry;
entry = entry->next;
free(tmp);
continue;
}
prev = entry;
entry = entry->next;
}
}
开发者ID:OPSF,项目名称:uClinux,代码行数:27,代码来源:ieee802_11_auth.c
示例8: reload_hw_mode_done
/**
* reload_hw_mode_done - Callback for after the HW mode is setup
* @hapd_iface: Pointer to interface data.
* @status: Status of the HW mode setup.
*/
static void reload_hw_mode_done(struct hostapd_iface *hapd_iface, int status)
{
struct hostapd_data *hapd = hapd_iface->bss[0];
struct hostapd_config_change *change = hapd_iface->change;
struct hostapd_config *newconf = change->newconf;
hostapd_iface_cb cb;
int freq;
if (status) {
printf("Failed to select hw_mode.\n");
cb = hapd_iface->reload_iface_cb;
hapd_iface->reload_iface_cb = NULL;
cb(hapd_iface, -1);
return;
}
freq = hostapd_hw_get_freq(hapd, newconf->channel);
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"Mode: %s Channel: %d Frequency: %d MHz\n",
hostapd_hw_mode_txt(newconf->hw_mode),
newconf->channel, freq);
if (hostapd_set_freq(hapd, newconf->hw_mode, freq)) {
printf("Could not set channel %d (%d MHz) for kernel "
"driver\n", newconf->channel, freq);
}
change->beacon_changed++;
reload_iface2(hapd_iface);
}
开发者ID:jameshilliard,项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5,代码行数:38,代码来源:reconfig.c
示例9: ap_sta_add
struct sta_info * ap_sta_add(struct hostapd_data *hapd, const u8 *addr)
{
struct sta_info *sta;
sta = ap_get_sta(hapd, addr);
if (sta)
return sta;
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, " New STA\n");
if (hapd->num_sta >= hapd->conf->max_num_sta) {
/* FIX: might try to remove some old STAs first? */
printf(" no more room for new STAs (%d/%d)\n",
hapd->num_sta, hapd->conf->max_num_sta);
return NULL;
}
sta = wpa_zalloc(sizeof(struct sta_info));
if (sta == NULL) {
printf(" malloc failed\n");
return NULL;
}
sta->acct_interim_interval = hapd->conf->radius->acct_interim_interval;
/* initialize STA info data */
eloop_register_timeout(hapd->conf->ap_max_inactivity, 0,
ap_handle_timer, hapd, sta);
memcpy(sta->addr, addr, ETH_ALEN);
sta->next = hapd->sta_list;
hapd->sta_list = sta;
hapd->num_sta++;
ap_sta_hash_add(hapd, sta);
sta->ssid = &hapd->conf->ssid;
return sta;
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:35,代码来源:sta_info.c
示例10: hostapd_init_sockets
int hostapd_init_sockets(struct hostap_driver_data *drv)
{
struct hostapd_data *hapd = drv->hapd;
struct ifreq ifr;
struct sockaddr_ll addr;
drv->sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
if (drv->sock < 0) {
perror("socket[PF_PACKET,SOCK_RAW]");
return -1;
}
if (eloop_register_read_sock(drv->sock, handle_read, drv->hapd, NULL))
{
printf("Could not register read socket\n");
return -1;
}
memset(&ifr, 0, sizeof(ifr));
snprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%sap", drv->iface);
if (ioctl(drv->sock, SIOCGIFINDEX, &ifr) != 0) {
perror("ioctl(SIOCGIFINDEX)");
return -1;
}
if (hostapd_set_iface_flags(drv, 1)) {
return -1;
}
memset(&addr, 0, sizeof(addr));
addr.sll_family = AF_PACKET;
addr.sll_ifindex = ifr.ifr_ifindex;
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"Opening raw packet socket for ifindex %d\n",
addr.sll_ifindex);
if (bind(drv->sock, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
perror("bind");
return -1;
}
memset(&ifr, 0, sizeof(ifr));
snprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%s", drv->iface);
if (ioctl(drv->sock, SIOCGIFHWADDR, &ifr) != 0) {
perror("ioctl(SIOCGIFHWADDR)");
return -1;
}
if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
printf("Invalid HW-addr family 0x%04x\n",
ifr.ifr_hwaddr.sa_family);
return -1;
}
memcpy(drv->hapd->own_addr, ifr.ifr_hwaddr.sa_data, ETH_ALEN);
return 0;
}
开发者ID:gittestusername,项目名称:uClinux,代码行数:57,代码来源:receive.c
示例11: handle_tx_callback
static void handle_tx_callback(hostapd *hapd, char *buf, size_t len, int ok)
{
struct ieee80211_hdr *hdr;
u16 fc, type, stype;
struct sta_info *sta;
hdr = (struct ieee80211_hdr *) buf;
fc = le_to_host16(hdr->frame_control);
type = WLAN_FC_GET_TYPE(fc);
stype = WLAN_FC_GET_STYPE(fc);
switch (type) {
case WLAN_FC_TYPE_MGMT:
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"MGMT (TX callback) %s\n", ok ? "ACK" : "fail");
ieee802_11_mgmt_cb(hapd, buf, len, stype, ok);
break;
case WLAN_FC_TYPE_CTRL:
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"CTRL (TX callback) %s\n", ok ? "ACK" : "fail");
break;
case WLAN_FC_TYPE_DATA:
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"DATA (TX callback) %s\n", ok ? "ACK" : "fail");
sta = ap_get_sta(hapd, hdr->addr1);
if (sta && sta->flags & WLAN_STA_PENDING_POLL) {
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "STA " MACSTR
" %s pending activity poll\n",
MAC2STR(sta->addr),
ok ? "ACKed" : "did not ACK");
if (ok)
sta->flags &= ~WLAN_STA_PENDING_POLL;
}
if (sta)
ieee802_1x_tx_status(hapd, sta, buf, len, ok);
break;
default:
printf("unknown TX callback frame type %d\n", type);
break;
}
}
开发者ID:gittestusername,项目名称:uClinux,代码行数:42,代码来源:receive.c
示例12: ap_sta_remove
static int ap_sta_remove(struct hostapd_data *hapd, struct sta_info *sta)
{
ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "Removing STA " MACSTR
" from kernel driver\n", MAC2STR(sta->addr));
if (hostapd_sta_remove(hapd, sta->addr) &&
sta->flags & WLAN_STA_ASSOC) {
printf("Could not remove station " MACSTR " from kernel "
"driver.\n", MAC2STR(sta->addr));
return -1;
}
return 0;
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:14,代码来源:sta_info.c
示例13: ap_list_timer
static void ap_list_timer(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_iface *iface = eloop_ctx;
time_t now;
struct ap_info *ap;
eloop_register_timeout(10, 0, ap_list_timer, iface, NULL);
if (!iface->ap_list)
return;
time(&now);
/* FIX: it looks like jkm-Purina ended up in busy loop in this
* function. Apparently, something can still cause a loop in the AP
* list.. */
while (iface->ap_list) {
ap = iface->ap_list->prev;
if (ap->last_beacon + iface->conf->ap_table_expiration_time >=
now)
break;
if (iface->conf->passive_scan_interval > 0)
ap_list_expired_ap(iface, ap);
ap_free_ap(iface, ap);
}
if (iface->olbc) {
int olbc = 0;
ap = iface->ap_list;
while (ap) {
if (ap_list_beacon_olbc(iface, ap)) {
olbc = 1;
break;
}
ap = ap->next;
}
if (!olbc) {
struct hostapd_data *hapd = iface->bss[0];
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
"OLBC not detected anymore\n");
iface->olbc = 0;
ieee802_11_set_beacons(hapd->iface);
}
}
}
开发者ID:10imaging,项目名称:scancode-toolkit,代码行数:47,代码来源:ap_list.c
示例14: ap_sta_deauthenticate
void ap_sta_deauthenticate(struct hostapd_data *hapd, struct sta_info *sta,
u16 reason)
{
HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "%s: deauthenticate STA " MACSTR
"\n", hapd->conf->iface, MAC2STR(sta->addr));
sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
if (!ap_sta_in_other_bss(hapd, sta, WLAN_STA_ASSOC))
ap_sta_remove(hapd, sta);
sta->timeout_next = STA_REMOVE;
eloop_cancel_timeout(ap_handle_timer, hapd, sta);
eloop_register_timeout(AP_MAX_INACTIVITY_AFTER_DEAUTH, 0,
ap_handle_timer, hapd, sta);
accounting_sta_stop(hapd, sta);
ieee802_1x_free_station(sta);
mlme_deauthenticate_indication(hapd, sta, reason);
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:17,代码来源:sta_info.c
注:本文中的HOSTAPD_DEBUG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论