C++ HAL_READ_UINT16函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HAL_READ_UINT16函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_READ_UINT16函数的具体用法？C++ HAL_READ_UINT16怎么用？C++ HAL_READ_UINT16使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HAL_READ_UINT16函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cyg_hal_plf_serial_isr

static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc, 
                       CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
    int res = 0;
    
    cyg_uint16 status;
    cyg_uint16 control;

    cyg_uint16 * base = ((channel_data_t *)__ch_data)->base;
    
    CYGARC_HAL_SAVE_GP();

    *__ctrlc = 0;

    HAL_READ_UINT16(base+CYG_DEV_SERIAL_RS232_SCSR, status);
    HAL_READ_UINT16(base+CYG_DEV_SERIAL_RS232_SCCR1, control);

    if((status & SCSR_RDRF) && (control & SCCR1_RIE))
    {   // Only if the interrupt was caused by the channel
        cyg_uint8 c;
        c = cyg_hal_plf_serial_getc(__ch_data);
	
        if(cyg_hal_is_break(&c, 1))
	    *__ctrlc = 1;
	
	HAL_INTERRUPT_ACKNOWLEDGE(((channel_data_t *)__ch_data)->imb3_vector);
	res = CYG_ISR_HANDLED;
    }

    CYGARC_HAL_RESTORE_GP();
    return res;
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:33，代码来源:hal_diag.c

示例2: cyg_hal_plf_scif_getc_nonblock

//static 
cyg_bool
cyg_hal_plf_scif_getc_nonblock(void* __ch_data, cyg_uint8* ch)
{
    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
    cyg_uint16 fdr, sr;
    cyg_bool res = false;

    HAL_READ_UINT16(base+_REG_SCSSR, sr);
    if (sr & CYGARC_REG_SCIF_SCSSR_ER) {
        cyg_uint8 ssr2;
        HAL_WRITE_UINT16(base+_REG_SCFER, 0);
        HAL_READ_UINT8(base+_REG_SC2SSR, ssr2);
        ssr2 &= ~CYGARC_REG_SCIF_SC2SSR_ORER;
        HAL_WRITE_UINT8(base+_REG_SC2SSR, ssr2);
        HAL_WRITE_UINT16(base+_REG_SCSSR,
                         CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~(CYGARC_REG_SCIF_SCSSR_BRK | CYGARC_REG_SCIF_SCSSR_FER | CYGARC_REG_SCIF_SCSSR_PER));
    }


    HAL_READ_UINT16(base+_REG_SCFDR, fdr);
    if (0 != (fdr & CYGARC_REG_SCIF_SCFDR_RCOUNT_MASK)) {

        HAL_READ_UINT8(base+_REG_SCFRDR, *ch);

        // Clear DR/RDF flags
        HAL_READ_UINT16(base+_REG_SCSSR, sr);
        HAL_WRITE_UINT16(base+_REG_SCSSR,
                         CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~(CYGARC_REG_SCIF_SCSSR_RDF | CYGARC_REG_SCIF_SCSSR_DR));

        res = true;
    }

    return res;
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:35，代码来源:sh2_scif.c

示例3: _mb93091_pci_cfg_read_uint16

externC cyg_uint16 
_mb93091_pci_cfg_read_uint16(int bus, int devfn, int offset)
{
    cyg_uint32 cfg_addr, addr, status;
    cyg_uint16 cfg_val = (cyg_uint16)0xFFFF;

    if (!_mb93091_has_vdk)
	    return cfg_val;
#ifdef CYGPKG_IO_PCI_DEBUG
    diag_printf("%s(bus=%x, devfn=%x, offset=%x) = ", __FUNCTION__, bus, devfn, offset);
#endif // CYGPKG_IO_PCI_DEBUG
    if ((bus == 0) && (CYG_PCI_DEV_GET_DEV(devfn) == 0)) {
        // PCI bridge
        addr = _MB93091_PCI_CONFIG + ((offset << 1) ^ 0x02);
    } else {
        cfg_addr = _cfg_addr(bus, devfn, offset ^ 0x02);
        HAL_WRITE_UINT32(_MB93091_PCI_CONFIG_ADDR, cfg_addr);
        addr = _MB93091_PCI_CONFIG_DATA + ((offset & 0x03) ^ 0x02);
    }
    HAL_READ_UINT16(addr, cfg_val);
    HAL_READ_UINT16(_MB93091_PCI_STAT_CMD, status);
    if (status & _MB93091_PCI_STAT_ERROR_MASK) {
        // Cycle failed - clean up and get out
        cfg_val = (cyg_uint16)0xFFFF;
        HAL_WRITE_UINT16(_MB93091_PCI_STAT_CMD, status & _MB93091_PCI_STAT_ERROR_MASK);
    }
#ifdef CYGPKG_IO_PCI_DEBUG
    diag_printf("%x\n", cfg_val);
#endif // CYGPKG_IO_PCI_DEBUG
    HAL_WRITE_UINT32(_MB93091_PCI_CONFIG_ADDR, 0);
    return cfg_val;
}

开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:32，代码来源:mb93091_pci.c

示例4: hal_arbitration_isr_sci

// Default arbitration ISR for serial interrupts. Although such arbitration
// belongs in the serial device driver, we require this default implementation
// for CTRL-C interrupts to be delivered correctly to any running ROM monitor.
// A device driver that uses more than just receive interrupts may of course
// provide its own arbiter.
externC cyg_uint32
hal_arbitration_isr_sci(CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
    cyg_uint32 isr_ret;
	cyg_uint16 scc_sr;
	cyg_uint16 scc_cr;

	// Try SCI0
	HAL_READ_UINT16(CYGARC_REG_IMM_SC1SR, scc_sr);
	HAL_READ_UINT16(CYGARC_REG_IMM_SCC1R1, scc_cr);
	if ((scc_sr & CYGARC_REG_IMM_SCxSR_RDRF) && (scc_cr & CYGARC_REG_IMM_SCCxR1_RIE)) {
	    isr_ret = hal_call_isr(CYGNUM_HAL_INTERRUPT_IMB3_SCI0_RX);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
		   return isr_ret;
	}

	HAL_READ_UINT16(CYGARC_REG_IMM_SC2SR, scc_sr);
	HAL_READ_UINT16(CYGARC_REG_IMM_SCC2R1, scc_cr);
	if ((scc_sr & CYGARC_REG_IMM_SCxSR_RDRF) && (scc_cr & CYGARC_REG_IMM_SCCxR1_RIE)) {
	    isr_ret = hal_call_isr(CYGNUM_HAL_INTERRUPT_IMB3_SCI1_RX);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
			return isr_ret;
	}

	return 0;
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:35，代码来源:var_intr.c

示例5: cyg_hal_plf_scif_putc

void
cyg_hal_plf_scif_putc(void* __ch_data, cyg_uint8 c)
{
    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
    cyg_uint16 fdr, sr;
    CYGARC_HAL_SAVE_GP();

    do {
        HAL_READ_UINT16(base+_REG_SCFDR, fdr);
    } while (((fdr & CYGARC_REG_SCIF_SCFDR_TCOUNT_MASK) >> CYGARC_REG_SCIF_SCFDR_TCOUNT_shift) == 16);

    HAL_WRITE_UINT8(base+_REG_SCFTDR, c);

    // Clear FIFO-empty/transmit end flags (read back SR first)
    HAL_READ_UINT16(base+_REG_SCFSR, sr);
    HAL_WRITE_UINT16(base+_REG_SCFSR, CYGARC_REG_SCIF_SCSSR_CLEARMASK   
                     & ~(CYGARC_REG_SCIF_SCSSR_TDFE | CYGARC_REG_SCIF_SCSSR_TEND ));

    // Hang around until the character has been safely sent.
    do {
        HAL_READ_UINT16(base+_REG_SCFDR, fdr);
    } while ((fdr & CYGARC_REG_SCIF_SCFDR_TCOUNT_MASK) != 0);

    CYGARC_HAL_RESTORE_GP();
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:25，代码来源:sh4_scif.c

示例6: cyg_hal_plf_scif_putc

void
cyg_hal_plf_scif_putc(void* __ch_data, cyg_uint8 c)
{
    channel_data_t* chan = (channel_data_t*)__ch_data;
    cyg_uint8* base = chan->base;
    cyg_uint16 fdr, sr;
    cyg_uint8 scscr = 0;
    CYGARC_HAL_SAVE_GP();

    HAL_READ_UINT8(base+_REG_SCSCR, scscr);
    if (chan->irda_mode) {
        HAL_WRITE_UINT8(base+_REG_SCSCR, scscr|CYGARC_REG_SCIF_SCSCR_TE);
    }
#ifdef CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX
    if (chan->async_rxtx_mode) {
        HAL_WRITE_UINT8(base+_REG_SCSCR, (scscr|CYGARC_REG_SCIF_SCSCR_TE)&~CYGARC_REG_SCIF_SCSCR_RE);
    }
#endif

    do {
        HAL_READ_UINT16(base+_REG_SCFDR, fdr);
    } while (((fdr & CYGARC_REG_SCIF_SCFDR_TCOUNT_MASK) >> CYGARC_REG_SCIF_SCFDR_TCOUNT_shift) == 16);

    HAL_WRITE_UINT8(base+_REG_SCFTDR, c);

    // Clear FIFO-empty/transmit end flags (read back SR first)
    HAL_READ_UINT16(base+_REG_SCSSR, sr);
    HAL_WRITE_UINT16(base+_REG_SCSSR, CYGARC_REG_SCIF_SCSSR_CLEARMASK   
                     & ~(CYGARC_REG_SCIF_SCSSR_TDFE | CYGARC_REG_SCIF_SCSSR_TEND ));

    // Hang around until all characters have been safely sent.
    do {
        HAL_READ_UINT16(base+_REG_SCSSR, sr);
    } while ((sr & CYGARC_REG_SCIF_SCSSR_TEND) == 0);


    if (chan->irda_mode) {
#ifdef CYGHWR_HAL_SH_SH2_SCIF_IRDA_TXRX_COMPENSATION
        // In IrDA mode there will be generated spurious RX events when
        // the TX unit is switched on. Eat that character.
        cyg_uint8 _junk;
        HAL_READ_UINT8(base+_REG_SCFRDR, _junk);

        // Clear buffer full flag (read back first)
        HAL_READ_UINT16(base+_REG_SCSSR, sr);
        HAL_WRITE_UINT16(base+_REG_SCSSR, 
                         CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~(CYGARC_REG_SCIF_SCSSR_RDF|CYGARC_REG_SCIF_SCSSR_DR));
#endif // CYGHWR_HAL_SH_SH2_SCIF_IRDA_TXRX_COMPENSATION
        // Disable transmitter again
        HAL_WRITE_UINT8(base+_REG_SCSCR, scscr);
    }
#ifdef CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX
    if (chan->async_rxtx_mode) {
        // Disable transmitter, enable receiver
        HAL_WRITE_UINT8(base+_REG_SCSCR, scscr);
    }
#endif // CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX

    CYGARC_HAL_RESTORE_GP();
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:60，代码来源:sh2_scif.c

示例7: cyg_hal_plf_scif_isr

static int
cyg_hal_plf_scif_isr(void *__ch_data, int* __ctrlc, 
                     CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
    cyg_uint8 c;
    cyg_uint16 fdr, sr;
    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
    int res = 0;
    CYGARC_HAL_SAVE_GP();

    *__ctrlc = 0;
    HAL_READ_UINT16(base+_REG_SCFDR, fdr);
    if ((fdr & CYGARC_REG_SCIF_SCFDR_RCOUNT_MASK) != 0) {
        HAL_READ_UINT8(base+_REG_SCFRDR, c);

        // Clear buffer full flag (read back first).
        HAL_READ_UINT16(base+_REG_SCSSR, sr);
        HAL_WRITE_UINT16(base+_REG_SCSSR, 
                         CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~CYGARC_REG_SCIF_SCSSR_RDF);

        if( cyg_hal_is_break( &c , 1 ) )
            *__ctrlc = 1;

        res = CYG_ISR_HANDLED;
    }

    CYGARC_HAL_RESTORE_GP();
    return res;
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:29，代码来源:sh2_scif.c

示例8: cyg_hal_plf_serial_control

static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
    static int irq_state = 0;
    channel_data_t* chan = (channel_data_t*)__ch_data;
    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
    cyg_uint16 ser_port_reg;
    int ret = 0;
    va_list ap;

    CYGARC_HAL_SAVE_GP();
    va_start(ap, __func);

    switch (__func) {
    case __COMMCTL_GETBAUD:
        ret = chan->baud_rate;
        break;
    case __COMMCTL_SETBAUD:
        chan->baud_rate = va_arg(ap, cyg_int32);
        // Should we verify this value here?
        cyg_hal_plf_serial_init_channel(chan);
        ret = 0;
        break;
    case __COMMCTL_IRQ_ENABLE:
        irq_state = 1;
        HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
        HAL_INTERRUPT_UNMASK(chan->isr_vector);

        HAL_READ_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
        ser_port_reg |= FREESCALE_ESCI_CR12_RIE;
        HAL_WRITE_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);

        break;
    case __COMMCTL_IRQ_DISABLE:
        ret = irq_state;
        irq_state = 0;
        HAL_INTERRUPT_MASK(chan->isr_vector);

        HAL_READ_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
        ser_port_reg &= ~(cyg_uint16)FREESCALE_ESCI_CR12_RIE;
        HAL_WRITE_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
        break;
    case __COMMCTL_DBG_ISR_VECTOR:
        ret = chan->isr_vector;
        break;
    case __COMMCTL_SET_TIMEOUT:
        ret = chan->msec_timeout;
        chan->msec_timeout = va_arg(ap, cyg_uint32);
    default:
        break;
    }

    va_end(ap);
    CYGARC_HAL_RESTORE_GP();
    return ret;
}

开发者ID:houzhenggang，项目名称:ecos-1，代码行数:56，代码来源:hal_diag.c

示例9: _mb93091_pci_cfg_write_uint32

externC void
_mb93091_pci_cfg_write_uint32(int bus, int devfn, int offset, cyg_uint32 cfg_val)
{
    cyg_uint32 cfg_addr, addr, status;

    if (!_mb93091_has_vdk)
	    return;
#ifdef CYGPKG_IO_PCI_DEBUG
    diag_printf("%s(bus=%x, devfn=%x, offset=%x, val=%x)\n", __FUNCTION__, bus, devfn, offset, cfg_val);
#endif // CYGPKG_IO_PCI_DEBUG
    if ((bus == 0) && (CYG_PCI_DEV_GET_DEV(devfn) == 0)) {
        // PCI bridge
        addr = _MB93091_PCI_CONFIG + (offset << 1);
    } else {
        cfg_addr = _cfg_addr(bus, devfn, offset);
        HAL_WRITE_UINT32(_MB93091_PCI_CONFIG_ADDR, cfg_addr);
        addr = _MB93091_PCI_CONFIG_DATA;
    }
    HAL_WRITE_UINT32(addr, cfg_val);
    HAL_READ_UINT16(_MB93091_PCI_STAT_CMD, status);
    if (status & _MB93091_PCI_STAT_ERROR_MASK) {
        // Cycle failed - clean up and get out
        HAL_WRITE_UINT16(_MB93091_PCI_STAT_CMD, status & _MB93091_PCI_STAT_ERROR_MASK);
    }
    HAL_WRITE_UINT32(_MB93091_PCI_CONFIG_ADDR, 0);
}

开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:26，代码来源:mb93091_pci.c

示例10: hal_arbitration_isr_tb

// Timebase interrupt can be caused by match on either reference A
// or B.  
// Note: If only one interrupt source is assigned per vector, and only
// reference interrupt A or B is used, this ISR is not
// necessary. Attach the timerbase reference A or B ISR directly to
// the LVLx vector instead.
externC cyg_uint32
hal_arbitration_isr_tb (CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
    cyg_uint32 isr_ret;
    cyg_uint16 tbscr;

    HAL_READ_UINT16 (CYGARC_REG_IMM_TBSCR, tbscr);
    if (tbscr & CYGARC_REG_IMM_TBSCR_REFA) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_TB_A);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }

    if (tbscr & CYGARC_REG_IMM_TBSCR_REFB) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_TB_B);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }

    return 0;
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:31，代码来源:var_intr.c

示例11: cyg_hal_plf_scif_init_channel

void
cyg_hal_plf_scif_init_channel(channel_data_t* chan)
{
    cyg_uint8* base = chan->base;
    cyg_uint16 sr;

    // Disable everything.
    HAL_WRITE_UINT16(base+_REG_SCSCR, 0);

    // Reset FIFO.
    HAL_WRITE_UINT16(base+_REG_SCFCR, 
                    CYGARC_REG_SCIF_SCFCR_TFRST|CYGARC_REG_SCIF_SCFCR_RFRST);

    // 8-1-no parity.
    HAL_WRITE_UINT16(base+_REG_SCSMR, 0);

    chan->baud_rate = CYGNUM_HAL_SH_SH4_SCIF_BAUD_RATE;
    cyg_hal_plf_scif_set_baud(base, CYGNUM_HAL_SH_SH4_SCIF_BAUD_RATE);

    // Clear status register (read back first).
    HAL_READ_UINT16(base+_REG_SCFSR, sr);
    HAL_WRITE_UINT16(base+_REG_SCFSR, 0);

    // Bring FIFO out of reset and set to trigger on every char in
    // FIFO (or C-c input would not be processed).
    HAL_WRITE_UINT16(base+_REG_SCFCR, 
                    CYGARC_REG_SCIF_SCFCR_RTRG_1|CYGARC_REG_SCIF_SCFCR_TTRG_1);

    // Leave Tx/Rx interrupts disabled, but enable Tx/Rx
    HAL_WRITE_UINT16(base+_REG_SCSCR, 
                    CYGARC_REG_SCIF_SCSCR_TE|CYGARC_REG_SCIF_SCSCR_RE);
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:32，代码来源:sh4_scif.c

示例12: hal_enable_profile_timer

int
hal_enable_profile_timer(int resolution)
{
    // Run periodic timer interrupt for profile 
    cyg_uint16 piscr;
    int period = resolution / 100;

    // Attach pit arbiter.
    HAL_INTERRUPT_ATTACH (PIT_IRQ,
                          &hal_arbitration_isr_pit, ID_PIT, 0);
    HAL_INTERRUPT_UNMASK (PIT_IRQ);

    // Attach pit isr.
    HAL_INTERRUPT_ATTACH (CYGNUM_HAL_INTERRUPT_SIU_PIT, &isr_pit,
                          ID_PIT, 0);
    HAL_INTERRUPT_SET_LEVEL (CYGNUM_HAL_INTERRUPT_SIU_PIT, PIT_IRQ_LEVEL);
    HAL_INTERRUPT_UNMASK (CYGNUM_HAL_INTERRUPT_SIU_PIT);


    // Set period.
    HAL_WRITE_UINT32 (CYGARC_REG_IMM_PITC, 
                      (2*period) << CYGARC_REG_IMM_PITC_COUNT_SHIFT);

    // Enable.
    HAL_READ_UINT16 (CYGARC_REG_IMM_PISCR, piscr);
    piscr |= CYGARC_REG_IMM_PISCR_PTE;
    HAL_WRITE_UINT16 (CYGARC_REG_IMM_PISCR, piscr);

    return resolution;
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:30，代码来源:var_misc.c

示例13: cyg_hal_plf_serial_isr

static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
                       CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{

    channel_data_t* chan = (channel_data_t*)__ch_data;
    CYG_ADDRESS esci_base = (CYG_ADDRESS) chan->base;
    cyg_uint16 esci_sr;
    int res = 0;
    cyg_uint8 ch_in;
    CYGARC_HAL_SAVE_GP();

    *__ctrlc = 0;

    HAL_READ_UINT16(FREESCALE_ESCI_SR(esci_base), esci_sr);
    if (esci_sr & FREESCALE_ESCI_SR_RDRF) {
        HAL_READ_UINT8(FREESCALE_ESCI_DRL(esci_base), ch_in);
        if( cyg_hal_is_break( (char *) &ch_in , 1 ) )
            *__ctrlc = 1;

        res = CYG_ISR_HANDLED;
        HAL_WRITE_UINT16(FREESCALE_ESCI_SR(esci_base), FREESCALE_ESCI_SR_RDRF);
    }

    HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);

    CYGARC_HAL_RESTORE_GP();
    return res;
}

开发者ID:houzhenggang，项目名称:ecos-1，代码行数:29，代码来源:hal_diag.c

示例14: hal_arbitration_isr_rtc

// Real time clock interrupts can be caused by the alarm or
// once-per-second.
// Note: If only one interrupt source is assigned per vector, and only
// the alarm or once-per-second interrupt is used, this ISR is not
// necessary. Attach the alarm or once-per-second ISR directly to the
// LVLx vector instead.
externC cyg_uint32
hal_arbitration_isr_rtc (CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
    cyg_uint32 isr_ret;
    cyg_uint16 rtcsc;

    HAL_READ_UINT16 (CYGARC_REG_IMM_RTCSC, rtcsc);
    if (rtcsc & CYGARC_REG_IMM_RTCSC_SEC) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_RTC_SEC);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }

    if (rtcsc & CYGARC_REG_IMM_RTCSC_ALR) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_RTC_ALR);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }

    return 0;
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:31，代码来源:var_intr.c

示例15: _csb281_pci_cfg_read_uint32

externC cyg_uint32 
_csb281_pci_cfg_read_uint32(int bus, int devfn, int offset)
{
    cyg_uint32 addr;
    cyg_uint32 cfg_val = (cyg_uint32)0xFFFFFFFF;

#ifdef CYGPKG_IO_PCI_DEBUG
    diag_printf("%s(bus=%x, devfn=%x, offset=%x) = ", __FUNCTION__, bus, devfn, offset);
#endif // CYGPKG_IO_PCI_DEBUG
    addr = _cfg_sel(bus, devfn, offset);
    HAL_READ_UINT32LE(addr, cfg_val);
#if 0
    HAL_READ_UINT16(_CSB281_PCI_STAT_CMD, status);
    if (status & _CSB281_PCI_STAT_ERROR_MASK) {
        // Cycle failed - clean up and get out
        cfg_val = (cyg_uint32)0xFFFFFFFF;
        HAL_WRITE_UINT16(_CSB281_PCI_STAT_CMD, status & _CSB281_PCI_STAT_ERROR_MASK);
    }
#endif
#ifdef CYGPKG_IO_PCI_DEBUG
    diag_printf("%x\n", cfg_val);
#endif // CYGPKG_IO_PCI_DEBUG
    HAL_WRITE_UINT32(_CSB281_PCI_CONFIG_ADDR, 0);
    return cfg_val;
}

开发者ID:perryhg，项目名称:terkos，代码行数:25，代码来源:hal_aux.c

示例16: mn10300_serial_stop_xmit

static void 
mn10300_serial_stop_xmit(serial_channel *chan)
{
#ifndef CYGPKG_IO_SERIAL_MN10300_POLLED_MODE    
    mn10300_serial_info *mn10300_chan = (mn10300_serial_info *)chan->dev_priv;
    cyg_uint16 cr;
    cyg_uint16 sr;

    // Wait until the transmitter has actually stopped before turning it off.
    
    do
    {
        sr = mn10300_read_sr( mn10300_chan );
        
    } while( sr & SR_TXF );
    
    HAL_READ_UINT16( mn10300_chan->base+SERIAL_CTR, cr );

    DISABLE_TRANSMIT_INTERRUPT(mn10300_chan);
    
    HAL_WRITE_UINT16( mn10300_chan->base+SERIAL_CTR, cr );

    cyg_drv_interrupt_mask(mn10300_chan->tx_int);
    
#endif    
}

开发者ID:LucidOne，项目名称:Rovio，代码行数:26，代码来源:mn10300_serial.c

示例17: cyg_hal_plf_serial_getc_nonblock

static cyg_bool
cyg_hal_plf_serial_getc_nonblock(void* __ch_data, cyg_uint8* ch)
{
    cyg_uint16 status;
    cyg_uint16 result;
    cyg_uint16 * base = ((channel_data_t *)__ch_data)->base;

    HAL_READ_UINT16(base+CYG_DEV_SERIAL_RS232_SCSR, status);
    if((status & SCSR_RDRF) == 0)
        return false;

    HAL_READ_UINT16(base+CYG_DEV_SERIAL_RS232_SCDR, result);
    *ch = (cyg_uint8)(result & 0x00ff);

    return true;
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:16，代码来源:hal_diag.c

示例18: cyg_hal_plf_scif_init_channel

void
cyg_hal_plf_scif_init_channel(channel_data_t* chan)
{
    cyg_uint8* base = chan->base;
    cyg_uint8 tmp;
    cyg_uint16 sr;
    int baud_rate = CYGNUM_HAL_SH_SH2_SCIF_BAUD_RATE;

    // Disable everything.
    HAL_WRITE_UINT8(base+_REG_SCSCR, 0);

    // Reset FIFO.
    HAL_WRITE_UINT8(base+_REG_SCFCR, 
                    CYGARC_REG_SCIF_SCFCR_TFRST|CYGARC_REG_SCIF_SCFCR_RFRST);
    HAL_WRITE_UINT16(base+_REG_SCFER, 0);

    // 8-1-no parity. This is also fine for IrDA mode
    HAL_WRITE_UINT8(base+_REG_SCSMR, 0);
    if (chan->irda_mode)
        HAL_WRITE_UINT8(base+_REG_SCIMR, CYGARC_REG_SCIF_SCIMR_IRMOD);
    else {
        HAL_WRITE_UINT8(base+_REG_SCIMR, 0);
    }

    // Set speed to CYGNUM_HAL_SH_SH2_SCIF_DEFAULT_BAUD_RATE
    HAL_READ_UINT8(base+_REG_SCSMR, tmp);
    tmp &= ~CYGARC_REG_SCIF_SCSMR_CKSx_MASK;
    tmp |= CYGARC_SCBRR_CKSx(baud_rate);
    HAL_WRITE_UINT8(base+_REG_SCSMR, tmp);
    HAL_WRITE_UINT8(base+_REG_SCBRR, CYGARC_SCBRR_N(baud_rate));

    // Let things settle: Here we should should wait the equivalent of
    // one bit interval,
    // i.e. 1/CYGNUM_HAL_SH_SH2_SCIF_DEFAULT_BAUD_RATE second, but
    // until we have something like the Linux delay loop, it's hard to
    // do reliably. So just move on and hope for the best (this is
    // unlikely to cause problems since the CPU has just come out of
    // reset anyway).

    // Clear status register (read back first).
    HAL_READ_UINT16(base+_REG_SCSSR, sr);
    HAL_WRITE_UINT16(base+_REG_SCSSR, 0);

    HAL_WRITE_UINT8(base+_REG_SC2SSR, CYGARC_REG_SCIF_SC2SSR_BITRATE_16|CYGARC_REG_SCIF_SC2SSR_EI);

    // Bring FIFO out of reset and set to trigger on every char in
    // FIFO (or C-c input would not be processed).
    HAL_WRITE_UINT8(base+_REG_SCFCR, 
                    CYGARC_REG_SCIF_SCFCR_RTRG_1|CYGARC_REG_SCIF_SCFCR_TTRG_1);

    // Leave Tx/Rx interrupts disabled, but enable Rx/Tx (only Rx for IrDA)
    if (chan->irda_mode)
        HAL_WRITE_UINT8(base+_REG_SCSCR, CYGARC_REG_SCIF_SCSCR_RE);
#ifdef CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX
    else if (chan->async_rxtx_mode)
        HAL_WRITE_UINT8(base+_REG_SCSCR, CYGARC_REG_SCIF_SCSCR_RE);
#endif 
    else
        HAL_WRITE_UINT8(base+_REG_SCSCR, CYGARC_REG_SCIF_SCSCR_TE|CYGARC_REG_SCIF_SCSCR_RE);
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:60，代码来源:sh2_scif.c

示例19: plf_init_sdramc

// Initialize SDRAM controller
void plf_init_sdramc(void)
{
    cyg_uint16 sdcr;

    
    HAL_READ_UINT16(&MCF5272_DEVS->sdramc.sdcr, sdcr);
    
    // Do not initialize SDRAM if it is already active
    if (!(sdcr & MCF5272_SDRAMC_SDCCR_ACT))
    {
#if (CYGHWR_HAL_SYSTEM_CLOCK_MHZ == 66)
        HAL_WRITE_UINT16(&MCF5272_DEVS->sdramc.sdtr, (0
            | MCF5272_SDRAMC_SDCTR_RTP_66MHz
            | MCF5272_SDRAMC_SDCTR_RC(0)
            | MCF5272_SDRAMC_SDCTR_RP(1)
            | MCF5272_SDRAMC_SDCTR_RCD(1)
            | MCF5272_SDRAMC_SDCTR_CLT_2));
#else
        // Clock frequency must be 48 Mhz
        HAL_WRITE_UINT16(&MCF5272_DEVS->sdramc.sdtr, (0
            | MCF5272_SDRAMC_SDCTR_RTP_48MHz
            | MCF5272_SDRAMC_SDCTR_RC(0)
            | MCF5272_SDRAMC_SDCTR_RP(1)
            | MCF5272_SDRAMC_SDCTR_RCD(0)
            | MCF5272_SDRAMC_SDCTR_CLT_2));
#endif

        HAL_WRITE_UINT16(&MCF5272_DEVS->sdramc.sdcr, (0
            | MCF5272_SDRAMC_SDCCR_MCAS_A9
#if (CYGHWR_INSTALLED_SDRAM_SIZE == 4)
            | MCF5272_SDRAMC_SDCCR_BALOC_A21
#else
            | MCF5272_SDRAMC_SDCCR_BALOC_A22
#endif
            | MCF5272_SDRAMC_SDCCR_REG
            | MCF5272_SDRAMC_SDCCR_INIT));

        // Start SDRAM controller with a memory write
        *((volatile char *) CYGMEM_REGION_sdram) = 0;

        // Wait until controller is ready
        do
        {
            HAL_READ_UINT16(&MCF5272_DEVS->sdramc.sdcr, sdcr);
        } while(!(sdcr & MCF5272_SDRAMC_SDCCR_ACT));
    }
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:48，代码来源:plf_startup.c

示例20: read_data_16

// Read one datum from 16-bit bus 
static int read_data_16(struct dm9000 *p, cyg_uint8 *dest)
{
    cyg_uint16 val;

    HAL_READ_UINT16(p->io_data, val);
    memcpy(dest, &val, 2);
    return 2;
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:9，代码来源:if_dm9000.c

注：本文中的HAL_READ_UINT16函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HAL_READ_UINT8函数代码示例发布时间：2022-05-30

C++ HAL_RCC_OscConfig函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19212|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9994|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8699|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8642|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9663|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8627|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8003|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8660|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ HAL_READ_UINT16函数代码示例

示例1: cyg_hal_plf_serial_isr

示例2: cyg_hal_plf_scif_getc_nonblock

示例3: _mb93091_pci_cfg_read_uint16

示例4: hal_arbitration_isr_sci

示例5: cyg_hal_plf_scif_putc

示例6: cyg_hal_plf_scif_putc

示例7: cyg_hal_plf_scif_isr

示例8: cyg_hal_plf_serial_control

示例9: _mb93091_pci_cfg_write_uint32

示例10: hal_arbitration_isr_tb

示例11: cyg_hal_plf_scif_init_channel

示例12: hal_enable_profile_timer

示例13: cyg_hal_plf_serial_isr

示例14: hal_arbitration_isr_rtc

示例15: _csb281_pci_cfg_read_uint32

示例16: mn10300_serial_stop_xmit

示例17: cyg_hal_plf_serial_getc_nonblock

示例18: cyg_hal_plf_scif_init_channel

示例19: plf_init_sdramc

示例20: read_data_16

请发表评论

全部评论

上一篇：

下一篇：

相机标定过程(opencv) + matlab参数导入ope

ashchan/mail-notifr: Mail Notifr - Gmail

TwistedAsylumMC/bedrock-unicode-characte

uber/RIBs: Uber&#39;s cross-platform mob

ajtowf/ng2_play: Angular 2 Play with Mat

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

uber/RIBs: Uber's cross-platform mob