C++ HAL_DMA2D_ConfigLayer函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HAL_DMA2D_ConfigLayer函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_DMA2D_ConfigLayer函数的具体用法？C++ HAL_DMA2D_ConfigLayer怎么用？C++ HAL_DMA2D_ConfigLayer使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HAL_DMA2D_ConfigLayer函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DMA2D_Config

static void DMA2D_Config(void)
{
  /* Configure the DMA2D Mode, Color Mode and output offset */
  Dma2dHandle.Init.Mode         = DMA2D_M2M_BLEND;
  Dma2dHandle.Init.ColorMode    = DMA2D_RGB565;
  Dma2dHandle.Init.OutputOffset = 0x0;     

  /* DMA2D Callbacks Configuration */
  Dma2dHandle.XferCpltCallback  = TransferComplete;
  Dma2dHandle.XferErrorCallback = TransferError;
  
  /* Foreground Configuration */
  Dma2dHandle.LayerCfg[1].AlphaMode = DMA2D_REPLACE_ALPHA;
  Dma2dHandle.LayerCfg[1].InputAlpha = 0x7F;
  Dma2dHandle.LayerCfg[1].InputColorMode = CM_RGB565;
  Dma2dHandle.LayerCfg[1].InputOffset = 0x0;

  /* Background Configuration */
  Dma2dHandle.LayerCfg[0].AlphaMode = DMA2D_REPLACE_ALPHA;
  Dma2dHandle.LayerCfg[0].InputAlpha = 0x7F;
  Dma2dHandle.LayerCfg[0].InputColorMode = CM_RGB565;
  Dma2dHandle.LayerCfg[0].InputOffset = 0x0;
  
  Dma2dHandle.Instance          = DMA2D; 
  
  /* DMA2D Initialisation */
  if(HAL_DMA2D_Init(&Dma2dHandle) != HAL_OK) 
  {
    /* Initialization Error */
    Error_Handler(); 
  }
  
  HAL_DMA2D_ConfigLayer(&Dma2dHandle, 0);
  HAL_DMA2D_ConfigLayer(&Dma2dHandle, 1);
}

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:35，代码来源:main.c

示例2: DMA2D_Config

static void DMA2D_Config(void)
{    
  HAL_StatusTypeDef hal_status = HAL_OK;
  
  /* Configure the DMA2D Mode, Color Mode and output offset */
  Dma2dHandle.Init.Mode         = DMA2D_M2M_PFC; /* DMA2D mode Memory to Memory with Pixel Format Conversion */
  Dma2dHandle.Init.ColorMode    = DMA2D_ARGB4444; /* DMA2D Output color mode is ARGB4444 (16 bpp) */
  Dma2dHandle.Init.OutputOffset = 0x0; /* No offset in output */    

  /* DMA2D Callbacks Configuration */
  Dma2dHandle.XferCpltCallback  = TransferComplete;
  Dma2dHandle.XferErrorCallback = TransferError;
  
  /* Foreground layer Configuration : layer 1 */
  Dma2dHandle.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  Dma2dHandle.LayerCfg[1].InputAlpha = 0xFF; /* Alpha fully opaque */
  Dma2dHandle.LayerCfg[1].InputColorMode = CM_ARGB8888; /* Layer 1 input format is ARGB8888 (32 bpp) */
  Dma2dHandle.LayerCfg[1].InputOffset = 0x0; /* No offset in input */

  Dma2dHandle.Instance = DMA2D; 
  
  /* DMA2D Initialization */
  hal_status = HAL_DMA2D_Init(&Dma2dHandle);
  OnError_Handler(hal_status != HAL_OK);
  
  hal_status = HAL_DMA2D_ConfigLayer(&Dma2dHandle, 1);
  OnError_Handler(hal_status != HAL_OK);
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:28，代码来源:main.c

示例3: ConvertCameraLineRgb565ToLcdLineARGB8888

/**
  * @brief  Converts a camera buffer line of format RGB565
  *         to a LCD display frame buffer line in format ARGB8888 using DMA2D service.
  * @param  pSrc: Pointer to source buffer
  * @param  pDst: Pointer to destination buffer
  * @param  xSize: Buffer width
  * @retval None
  */
static void ConvertCameraLineRgb565ToLcdLineARGB8888(void *pSrc, void *pDst, uint32_t xSize)
{
  HAL_StatusTypeDef hal_status = HAL_OK;
  
  /* Configure the DMA2D Mode, Color Mode and output offset */
  hdma2d_camera.Init.Mode         = DMA2D_M2M_PFC;
  hdma2d_camera.Init.ColorMode    = DMA2D_ARGB8888;
  hdma2d_camera.Init.OutputOffset = 0;

  /* Foreground Configuration */
  hdma2d_camera.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d_camera.LayerCfg[1].InputAlpha = 0xFF;
  hdma2d_camera.LayerCfg[1].InputColorMode = DMA2D_RGB565;
  hdma2d_camera.LayerCfg[1].InputOffset = 0;

  hdma2d_camera.Instance = DMA2D;

  /* DMA2D Initialization */
  if (HAL_DMA2D_Init(&hdma2d_camera) == HAL_OK)
  {
    if (HAL_DMA2D_ConfigLayer(&hdma2d_camera, 1) == HAL_OK)
    {
      if (HAL_DMA2D_Start(&hdma2d_camera, (uint32_t)pSrc, (uint32_t)pDst, xSize, 1) == HAL_OK)
      {
        /* Polling For DMA transfer */
        hal_status = HAL_DMA2D_PollForTransfer(&hdma2d_camera, 10);
        ASSERT(hal_status != HAL_OK);
      }
    }
  }
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:39，代码来源:camera.c

示例4: ConvertCameraLineRgb565ToLcdColumnARGB8888

/**
  * @brief  Converts a camera buffer line of format RGB565
  *         to a LCD display frame buffer column in format ARGB8888 using DMA2D service.
  *         This handles the rotation of 90 degrees hour direction of camera buffer.
  * @param  pSrc: Pointer to source buffer
  * @param  pDst: Pointer to destination buffer
  * @param  xSize: Buffer width
  * @param  lineStridePixels: line stride in pixels unit
  * @retval None
  */
static void ConvertCameraLineRgb565ToLcdColumnARGB8888(void *pSrc, void *pDst, uint32_t xSize, uint32_t lineStridePixels)
{
  HAL_StatusTypeDef hal_status = HAL_OK;

  /* Configure the DMA2D Mode, Color Mode and output offset */
  hdma2d_eval.Init.Mode         = DMA2D_M2M_PFC;
  hdma2d_eval.Init.ColorMode    = DMA2D_ARGB8888;
  hdma2d_eval.Init.OutputOffset = lineStridePixels;

  /* Foreground Configuration */
  hdma2d_eval.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d_eval.LayerCfg[1].InputAlpha = 0xFF;
  hdma2d_eval.LayerCfg[1].InputColorMode = DMA2D_RGB565;
  hdma2d_eval.LayerCfg[1].InputOffset = 0;

  hdma2d_eval.Instance = DMA2D;

  /* DMA2D Initialization */
  if (HAL_DMA2D_Init(&hdma2d_eval) == HAL_OK)
  {
    if (HAL_DMA2D_ConfigLayer(&hdma2d_eval, 1) == HAL_OK)
    {
      /* xSize x 1 = size in pixels to copy */
      /* Width = 1, Height = xSize          */
      if (HAL_DMA2D_Start(&hdma2d_eval, (uint32_t)pSrc, (uint32_t)pDst, 1, xSize) == HAL_OK)
      {
        /* Polling For DMA transfer */
        hal_status = HAL_DMA2D_PollForTransfer(&hdma2d_eval, 10);
        BSP_TEST_APPLI_ASSERT(hal_status != HAL_OK);
      }
    }
  }
}

开发者ID:z80，项目名称:stm32f429，代码行数:43，代码来源:camera.c

示例5: LCD_LL_ConvertLineToARGB8888

/**
  * @brief  Converts a line to an ARGB8888 pixel format.
  * @param  pSrc: Pointer to source buffer
  * @param  pDst: Output color  
  * @retval None
  */
static void LCD_LL_ConvertLineToARGB8888(void *pSrc, void *pDst)
{ 
  static DMA2D_HandleTypeDef hdma2d_eval;  
  
  /* Enable DMA2D clock */
  __HAL_RCC_DMA2D_CLK_ENABLE();
  
  /* Configure the DMA2D Mode, Color Mode and output offset */
  hdma2d_eval.Init.Mode         = DMA2D_M2M_PFC;
  hdma2d_eval.Init.ColorMode    = DMA2D_ARGB8888;
  hdma2d_eval.Init.OutputOffset = 0;     
  
  /* Foreground Configuration */
  hdma2d_eval.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d_eval.LayerCfg[1].InputAlpha = 0xFF;
  hdma2d_eval.LayerCfg[1].InputColorMode = CM_RGB565;
  hdma2d_eval.LayerCfg[1].InputOffset = 0;
  
  hdma2d_eval.Instance = DMA2D; 
  
  /* DMA2D Initialization */
  if(HAL_DMA2D_Init(&hdma2d_eval) == HAL_OK) 
  {
    if(HAL_DMA2D_ConfigLayer(&hdma2d_eval, 1) == HAL_OK) 
    {
      if (HAL_DMA2D_Start(&hdma2d_eval, (uint32_t)pSrc, (uint32_t)pDst, BSP_LCD_GetXSize(), 1) == HAL_OK)
      {
        /* Polling For DMA transfer */  
        HAL_DMA2D_PollForTransfer(&hdma2d_eval, 10);
      }
    }
  } 
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:39，代码来源:main.c

示例6: LCD_LL_ConvertLineToARGB8888

/**
  * @brief  Converts a RGB565 camera frame buffer line (width = 320 pixels)
  * into a ARGB8888 LCD Frame buffer line (of same width 320 pixels).
  * @param  pSrc: Pointer to source buffer in Camera frame buffer (camera frame buffer line)
  * @param  pDst: Pointer to destination buffer in LCD frame buffer (LCD frame buffer line)
  * @param  xSize: Buffer width
  * @retval None
  */
static void LCD_LL_ConvertLineToARGB8888(void *pSrc, void *pDst, uint32_t xSize)
{
  DMA2D_HandleTypeDef hdma2d_eval;

  /* Configure the DMA2D Mode, Color Mode and output offset */
  hdma2d_eval.Init.Mode         = DMA2D_M2M_PFC;
  hdma2d_eval.Init.ColorMode    = DMA2D_ARGB8888; /* Output color out of PFC */
  hdma2d_eval.Init.OutputOffset = 0;

  /* Foreground Configuration */
  hdma2d_eval.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d_eval.LayerCfg[1].InputAlpha = 0xFF; /* fully opaque */
  hdma2d_eval.LayerCfg[1].InputColorMode = CM_RGB565;
  hdma2d_eval.LayerCfg[1].InputOffset = 0;

  hdma2d_eval.Instance = DMA2D;

  /* DMA2D Initialization */
  if(HAL_DMA2D_Init(&hdma2d_eval) == HAL_OK)
  {
    if(HAL_DMA2D_ConfigLayer(&hdma2d_eval, 1) == HAL_OK)
    {
      if (HAL_DMA2D_Start(&hdma2d_eval, (uint32_t)pSrc, (uint32_t)pDst, xSize, 1) == HAL_OK)
      {
        /* Polling For DMA transfer */
        HAL_DMA2D_PollForTransfer(&hdma2d_eval, 10);
      }
    }
  }
  else
  {
    while(1);
  }
}

开发者ID:Lembed，项目名称:STM32CubeF4-mirrors，代码行数:42，代码来源:main.c

示例7: DMA2D_Config

static void DMA2D_Config(void)
{    
  /* Configure the DMA2D Mode, Color Mode and output offset */
  Dma2dHandle.Init.Mode         = DMA2D_M2M_PFC;
  Dma2dHandle.Init.ColorMode    = DMA2D_ARGB4444;
  Dma2dHandle.Init.OutputOffset = 0x0;     

  /* DMA2D Callbacks Configuration */
  Dma2dHandle.XferCpltCallback  = TransferComplete;
  Dma2dHandle.XferErrorCallback = TransferError;
  
  /* Foreground Configuration */
  Dma2dHandle.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  Dma2dHandle.LayerCfg[1].InputAlpha = 0xFF;
  Dma2dHandle.LayerCfg[1].InputColorMode = CM_ARGB8888;
  Dma2dHandle.LayerCfg[1].InputOffset = 0x0;

  Dma2dHandle.Instance          = DMA2D; 
  
  /* DMA2D Initialisation */
  if(HAL_DMA2D_Init(&Dma2dHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  }
  
  if(HAL_DMA2D_ConfigLayer(&Dma2dHandle, 1) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  }  
}

开发者ID:Bosvark，项目名称:STM32Cube_FW_F4_V1.1.0，代码行数:32，代码来源:main.c

示例8: DMA2D_Config

/**
  * @brief DMA2D configuration.
  * @note  This function Configure tha DMA2D peripheral :
  *        1) Configure the transfer mode : memory to memory
  *        2) Configure the output color mode as ARGB4444
  *        3) Configure the transfer from FLASH to SRAM   
  *        4) Configure the data size : 150x150 (pixels)  
  * @retval
  *  None
  */
static void DMA2D_Config(void)
{
  /* Configure the DMA2D Mode, Color Mode and output offset */  
  Dma2dHandle.Init.Mode         = DMA2D_M2M; /* DMA2D Mode memory to memory */
  Dma2dHandle.Init.ColorMode    = DMA2D_ARGB4444; /* Output color mode is ARGB4444 : 16 bpp */
  Dma2dHandle.Init.OutputOffset = 0x0; /* No offset in output */    

  /* DMA2D Callbacks Configuration */
  Dma2dHandle.XferCpltCallback  = TransferComplete;
  Dma2dHandle.XferErrorCallback = TransferError;
  
  /* Foreground Configuration : Layer 1 */
  Dma2dHandle.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  Dma2dHandle.LayerCfg[1].InputAlpha = 0xFF; /* Fully opaque */
  Dma2dHandle.LayerCfg[1].InputColorMode = CM_ARGB4444; /* Background layer format is ARGB4444 : 16 bpp */
  Dma2dHandle.LayerCfg[1].InputOffset = 0x0; /* No offset in input */

  Dma2dHandle.Instance = DMA2D; 
  
  /* DMA2D Initialisation */
  if(HAL_DMA2D_Init(&Dma2dHandle) != HAL_OK) 
  {
    /* Initialization Error */
    Error_Handler(); 
  }
  
  if(HAL_DMA2D_ConfigLayer(&Dma2dHandle, 1) != HAL_OK) 
  {
    /* Initialization Error */
    Error_Handler(); 
  }  
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:42，代码来源:main.c

示例9: LL_FillBuffer

/**
  * @brief  Fills a buffer.
  * @param  LayerIndex: Layer index
  * @param  pDst: Pointer to destination buffer
  * @param  xSize: Buffer width
  * @param  ySize: Buffer height
  * @param  OffLine: Offset
  * @param  ColorIndex: Color index
  * @retval None
  */
static void LL_FillBuffer(uint32_t LayerIndex, void *pDst, uint32_t xSize, uint32_t ySize, uint32_t OffLine, uint32_t ColorIndex) 
{
  /* Register to memory mode with ARGB8888 as color Mode */ 
  hDma2dHandler.Init.Mode         = DMA2D_R2M;
  if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565)
  { /* RGB565 format */ 
    hDma2dHandler.Init.ColorMode    = DMA2D_RGB565;
  }
  else
  { /* ARGB8888 format */
    hDma2dHandler.Init.ColorMode    = DMA2D_ARGB8888;
  }
  hDma2dHandler.Init.OutputOffset = OffLine;      
  
  hDma2dHandler.Instance = DMA2D;
  
  /* DMA2D Initialization */
  if(HAL_DMA2D_Init(&hDma2dHandler) == HAL_OK) 
  {
    if(HAL_DMA2D_ConfigLayer(&hDma2dHandler, LayerIndex) == HAL_OK) 
    {
      if (HAL_DMA2D_Start(&hDma2dHandler, ColorIndex, (uint32_t)pDst, xSize, ySize) == HAL_OK)
      {
        /* Polling For DMA transfer */  
        HAL_DMA2D_PollForTransfer(&hDma2dHandler, 10);
      }
    }
  } 
}

开发者ID:picohari，项目名称:intewa_stm32f7，代码行数:39，代码来源:stm32746g_discovery_lcd.c

示例10: LL_ConvertLineToARGB8888

/**
  * @brief  Converts a line to an ARGB8888 pixel format.
  * @param  pSrc: Pointer to source buffer
  * @param  pDst: Output color
  * @param  xSize: Buffer width
  * @param  ColorMode: Input color mode   
  * @retval None
  */
static void LL_ConvertLineToARGB8888(void *pSrc, void *pDst, uint32_t xSize, uint32_t ColorMode)
{    
  /* Configure the DMA2D Mode, Color Mode and output offset */
  hDma2dHandler.Init.Mode         = DMA2D_M2M_PFC;
  hDma2dHandler.Init.ColorMode    = DMA2D_ARGB8888;
  hDma2dHandler.Init.OutputOffset = 0;     
  
  /* Foreground Configuration */
  hDma2dHandler.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hDma2dHandler.LayerCfg[1].InputAlpha = 0xFF;
  hDma2dHandler.LayerCfg[1].InputColorMode = ColorMode;
  hDma2dHandler.LayerCfg[1].InputOffset = 0;
  
  hDma2dHandler.Instance = DMA2D; 
  
  /* DMA2D Initialization */
  if(HAL_DMA2D_Init(&hDma2dHandler) == HAL_OK) 
  {
    if(HAL_DMA2D_ConfigLayer(&hDma2dHandler, 1) == HAL_OK) 
    {
      if (HAL_DMA2D_Start(&hDma2dHandler, (uint32_t)pSrc, (uint32_t)pDst, xSize, 1) == HAL_OK)
      {
        /* Polling For DMA transfer */  
        HAL_DMA2D_PollForTransfer(&hDma2dHandler, 10);
      }
    }
  } 
}

开发者ID:picohari，项目名称:intewa_stm32f7，代码行数:36，代码来源:stm32746g_discovery_lcd.c

示例11: CopyPicture

/**
  * @brief  Converts a line to an ARGB8888 pixel format.
  * @param  pSrc: Pointer to source buffer
  * @param  pDst: Output color
  * @param  xSize: Buffer width
  * @param  ColorMode: Input color mode
  * @retval None
  */
static void CopyPicture(uint32_t *pSrc, uint32_t *pDst, uint16_t x, uint16_t y, uint16_t xsize, uint16_t ysize)
{

  uint32_t destination = (uint32_t)pDst + (y * 800 + x) * 4;
  uint32_t source      = (uint32_t)pSrc;

  /*##-1- Configure the DMA2D Mode, Color Mode and output offset #############*/
  hdma2d.Init.Mode         = DMA2D_M2M;
  hdma2d.Init.ColorMode    = DMA2D_ARGB8888;
  hdma2d.Init.OutputOffset = 800 - xsize;

  /*##-2- DMA2D Callbacks Configuration ######################################*/
  hdma2d.XferCpltCallback  = NULL;

  /*##-3- Foreground Configuration ###########################################*/
  hdma2d.LayerCfg[0].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d.LayerCfg[0].InputAlpha = 0xFF;
  hdma2d.LayerCfg[0].InputColorMode = CM_ARGB8888;
  hdma2d.LayerCfg[0].InputOffset = 0;

  hdma2d.Instance          = DMA2D;

  /* DMA2D Initialization */
  if(HAL_DMA2D_Init(&hdma2d) == HAL_OK)
  {
    if(HAL_DMA2D_ConfigLayer(&hdma2d, 0) == HAL_OK)
    {
      if (HAL_DMA2D_Start(&hdma2d, source, destination, xsize, ysize) == HAL_OK)
      {
        /* Polling For DMA transfer */
        HAL_DMA2D_PollForTransfer(&hdma2d, 100);
      }
    }
  }
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:43，代码来源:main.c

示例12: DMA2D_Config

static void DMA2D_Config(void)
{  
  /* Configure the DMA2D Mode, Color Mode and output offset */
  Dma2dHandle.Init.Mode         = DMA2D_M2M_BLEND; /* DMA2D mode Memory to Memory with Blending */
  Dma2dHandle.Init.ColorMode    = DMA2D_RGB565; /* output format of DMA2D */
  Dma2dHandle.Init.OutputOffset = 0x0;  /* No offset in output */   

  /* DMA2D Callbacks Configuration */
  Dma2dHandle.XferCpltCallback  = TransferComplete;
  Dma2dHandle.XferErrorCallback = TransferError;
  
  /* Foreground layer Configuration */
  Dma2dHandle.LayerCfg[1].AlphaMode = DMA2D_REPLACE_ALPHA;
  Dma2dHandle.LayerCfg[1].InputAlpha = 0x7F; /* 127 : semi-transparent */
  Dma2dHandle.LayerCfg[1].InputColorMode = CM_RGB565;
  Dma2dHandle.LayerCfg[1].InputOffset = 0x0; /* No offset in input */

  /* Background layer Configuration */
  Dma2dHandle.LayerCfg[0].AlphaMode = DMA2D_REPLACE_ALPHA;
  Dma2dHandle.LayerCfg[0].InputAlpha = 0x7F; /* 127 : semi-transparent */
  Dma2dHandle.LayerCfg[0].InputColorMode = CM_RGB565;
  Dma2dHandle.LayerCfg[0].InputOffset = 0x0; /* No offset in input */
  
  Dma2dHandle.Instance = DMA2D; 
  
  /* DMA2D Initialisation */
  if(HAL_DMA2D_Init(&Dma2dHandle) != HAL_OK) 
  {
    /* Initialization Error */
    Error_Handler(); 
  }
  
  /* Apply DMA2D Foreground configuration */
  HAL_DMA2D_ConfigLayer(&Dma2dHandle, 1);

  /* Apply DMA2D Background configuration */
  HAL_DMA2D_ConfigLayer(&Dma2dHandle, 0);  
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:38，代码来源:main.c

示例13: Prepare_Picture

/**
  * @brief  Prepares the picture to be saved in microSD.
  * @param  None
  * @retval None
  */
static void Prepare_Picture(void)
{
  uint32_t addrSrc = LCD_FRAME_BUFFER;
  uint32_t addrDst = CONVERTED_FRAME_BUFFER;
  static DMA2D_HandleTypeDef hdma2d_eval;
  uint32_t lineCnt = 0;

  /* Configure the DMA2D Mode, Color Mode and output offset : used to convert ARGB8888 to RGB888 */
  /* used in BMP file format                                                                     */
  hdma2d_eval.Init.Mode         = DMA2D_M2M_PFC;
  hdma2d_eval.Init.ColorMode    = DMA2D_RGB888; /* DMA2D Output format */
  hdma2d_eval.Init.OutputOffset = 0;

  /* Foreground Configuration */
  hdma2d_eval.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d_eval.LayerCfg[1].InputAlpha = 0xFF;
  hdma2d_eval.LayerCfg[1].InputColorMode = DMA2D_ARGB8888; /* DMA2D input format */
  hdma2d_eval.LayerCfg[1].InputOffset = 70; /* skip 70 pixels on left when reading addrSrc : the left margin */

  hdma2d_eval.Instance = DMA2D;

  /* Go to start of last drawing pad useful line from LCD frame buffer */
  addrSrc += ((BSP_LCD_GetYSize() - 70 - 1) * BSP_LCD_GetXSize() * ARGB8888_BYTE_PER_PIXEL);

  /* Copy and Convert picture from LCD frame buffer in ARGB8888 to Converted frame buffer in
   * RGB888 pixel format for all the useful lines of the drawing pad */
  for(lineCnt=0; lineCnt < (BSP_LCD_GetYSize() - 80); lineCnt++)
  {
    /* DMA2D Initialization */
    if(HAL_DMA2D_Init(&hdma2d_eval) == HAL_OK)
    {
      if(HAL_DMA2D_ConfigLayer(&hdma2d_eval, 1) == HAL_OK)
      {
        if (HAL_DMA2D_Start(&hdma2d_eval, addrSrc, addrDst,
                        (BSP_LCD_GetXSize() - 80), 1) == HAL_OK)
        {
          /* Polling For DMA transfer */
          HAL_DMA2D_PollForTransfer(&hdma2d_eval, 10);
        }
      }
    }

    /* Increment the destination address by one line RGB888 */
    addrDst += ((BSP_LCD_GetXSize() - 80) * RGB888_BYTE_PER_PIXEL);

    /* Decrement the source address by one line */
    addrSrc -= (BSP_LCD_GetXSize() * ARGB8888_BYTE_PER_PIXEL);
  }
}

开发者ID:Lembed，项目名称:STM32CubeF4-mirrors，代码行数:54，代码来源:main.c

示例14: MX_DMA2D_Init

/* DMA2D init function */
void MX_DMA2D_Init(void)
{

  hdma2d.Instance = DMA2D;
  hdma2d.Init.Mode = DMA2D_M2M;
  hdma2d.Init.ColorMode = DMA2D_ARGB8888;
  hdma2d.Init.OutputOffset = 0;
  hdma2d.LayerCfg[1].InputOffset = 0;
  hdma2d.LayerCfg[1].InputColorMode = CM_ARGB8888;
  hdma2d.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d.LayerCfg[1].InputAlpha = 0;
  HAL_DMA2D_Init(&hdma2d);

  HAL_DMA2D_ConfigLayer(&hdma2d, 1);

}

开发者ID:pkdevboxy，项目名称:fletch，代码行数:17，代码来源:mx_init.c

示例15: PicturePrepare

/**
  * @brief  Prepares the picture to be Saved in USB.
  * @param  None
  * @retval None
  */
static void PicturePrepare(void)
{
  static DMA2D_HandleTypeDef hdma2d_eval;
  uint32_t addrSrc = LCD_BG_LAYER_ADDRESS + ((LcdResX - CameraResX) / 2 * ARGB8888_BYTE_PER_PIXEL);
  uint32_t addrDst = CONVERTED_FRAME_BUFFER;
  uint32_t lineCnt = 0;

  /* Configure the DMA2D Mode, Color Mode and output offset */
  hdma2d_eval.Init.Mode         = DMA2D_M2M_PFC;
  hdma2d_eval.Init.ColorMode    = DMA2D_RGB888; /* Output color mode at the output of DMA2D operation */
  hdma2d_eval.Init.OutputOffset = 0;

  /* Foreground Configuration */
  hdma2d_eval.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d_eval.LayerCfg[1].InputAlpha = 0xFF;
  hdma2d_eval.LayerCfg[1].InputColorMode = DMA2D_ARGB8888;
  hdma2d_eval.LayerCfg[1].InputOffset = 0;

  hdma2d_eval.Instance = DMA2D;

  /* Go to last line of camera image in LCD BG frame buffer in order to start building BMP file */
  /* As BMP file encoding starts with last line down to the first */
  addrSrc += (LcdResY - ((LcdResY - CameraResY) / 2) - 1 ) * LcdResX * ARGB8888_BYTE_PER_PIXEL;

  /* Convert picture line by line to RGB888 pixel format */
  for(lineCnt = 0; lineCnt < CameraResY; lineCnt++)
  {
    /* DMA2D Initialization */
    if(HAL_DMA2D_Init(&hdma2d_eval) == HAL_OK)
    {
      if(HAL_DMA2D_ConfigLayer(&hdma2d_eval, 1) == HAL_OK)
      {
        if (HAL_DMA2D_Start(&hdma2d_eval, addrSrc, addrDst, CameraResX, 1) == HAL_OK)
        {
          /* Polling For DMA transfer */
          HAL_DMA2D_PollForTransfer(&hdma2d_eval, 10);
        }
      }
    }
    /* Manage the source and destination buffers */
    addrDst += (CameraResX * RGB888_BYTE_PER_PIXEL);
    addrSrc -= (LcdResX * ARGB8888_BYTE_PER_PIXEL);
  }
}

开发者ID:Lembed，项目名称:STM32CubeF4-mirrors，代码行数:49，代码来源:main.c

示例16: CopyBlendedBufferToLcdFrameBuffer

/**
  * @brief  Copy and convert the blended image (LAYER_SIZE_X, LAYER_SIZE_Y) of format ARGB4444
  * to LCD frame buffer area centered in WVGA resolution.
  * The area of copy is of size (LAYER_SIZE_X, LAYER_SIZE_Y) in ARGB8888.
  * @param  pSrc: Pointer to source buffer : blended image buffer start here
  * @param  pDst: Pointer to destination buffer LCD frame buffer center area start here
  * @param  xSize: Buffer width (LAYER_SIZE_X here)
  * @param  ySize: Buffer height (LAYER_SIZE_Y here)
  * @retval LCD Status : LCD_OK or LCD_ERROR
  */
static uint8_t CopyBlendedBufferToLcdFrameBuffer(void *pSrc, void *pDst, uint32_t xSize, uint32_t ySize)
{
  DMA2D_HandleTypeDef hdma2d_eval;
  HAL_StatusTypeDef hal_status = HAL_OK;
  uint8_t lcd_status = LCD_ERROR;

  /* Configure the DMA2D Mode, Color Mode and output offset */
  hdma2d_eval.Init.Mode         = DMA2D_M2M_PFC;
  hdma2d_eval.Init.ColorMode    = DMA2D_ARGB8888; /* Output color out of PFC */

  /* Output offset in pixels == nb of pixels to be added at end of line to come to the  */
  /* first pixel of the next line : on the output side of the DMA2D computation         */
  hdma2d_eval.Init.OutputOffset = (LcdResX - LAYER_SIZE_X);

  /* Foreground Configuration */
  hdma2d_eval.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d_eval.LayerCfg[1].InputAlpha = 0xFF; /* fully opaque */
  hdma2d_eval.LayerCfg[1].InputColorMode = CM_ARGB4444;
  hdma2d_eval.LayerCfg[1].InputOffset = 0;

  hdma2d_eval.Instance = DMA2D;

  /* DMA2D Initialization */
  if(HAL_DMA2D_Init(&hdma2d_eval) == HAL_OK)
  {
    if(HAL_DMA2D_ConfigLayer(&hdma2d_eval, 1) == HAL_OK)
    {
      if (HAL_DMA2D_Start(&hdma2d_eval, (uint32_t)pSrc, (uint32_t)pDst, xSize, ySize) == HAL_OK)
      {
        /* Polling For DMA transfer */
        hal_status = HAL_DMA2D_PollForTransfer(&hdma2d_eval, 10);
        if(hal_status == HAL_OK)
        {
          /* return good status on exit */
          lcd_status = LCD_OK;
        }
      }
    }
  }

  return(lcd_status);
}

开发者ID:z80，项目名称:stm32f429，代码行数:52，代码来源:main.c

示例17: DMA2D_Config

static void DMA2D_Config(void)
{
  HAL_StatusTypeDef hal_status = HAL_OK;

  /* Register to memory mode with ARGB8888 as colorMode */  
  Dma2dHandle.Init.Mode         = DMA2D_R2M;
  Dma2dHandle.Init.ColorMode    = DMA2D_ARGB8888;
  Dma2dHandle.Init.OutputOffset = 0x0;     

  Dma2dHandle.XferCpltCallback  = TransferComplete;
  Dma2dHandle.XferErrorCallback = TransferError;
  Dma2dHandle.Instance          = DMA2D;

  /* DMA2D Initialization */
  hal_status = HAL_DMA2D_Init(&Dma2dHandle);
  OnError_Handler(hal_status != HAL_OK);

  hal_status = HAL_DMA2D_ConfigLayer(&Dma2dHandle, 1);
  OnError_Handler(hal_status != HAL_OK);
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:20，代码来源:main.c

示例18: MX_DMA2D_Init

/* DMA2D init function */
static void MX_DMA2D_Init(void)
{

    hdma2d.Instance = DMA2D;
    hdma2d.Init.Mode = DMA2D_M2M;
    hdma2d.Init.ColorMode = DMA2D_OUTPUT_RGB565;
    hdma2d.Init.OutputOffset = 0;
    hdma2d.LayerCfg[0].InputOffset = 0;
    hdma2d.LayerCfg[0].InputColorMode = DMA2D_INPUT_RGB565;
    hdma2d.LayerCfg[0].AlphaMode = DMA2D_NO_MODIF_ALPHA;
    hdma2d.LayerCfg[0].InputAlpha = 0;
    if (HAL_DMA2D_Init(&hdma2d) != HAL_OK)
    {
        RT_ASSERT(RT_NULL);
    }

    if (HAL_DMA2D_ConfigLayer(&hdma2d, 0) != HAL_OK)
    {
        RT_ASSERT(RT_NULL);
    }
}

开发者ID:onelife，项目名称:rt-thread，代码行数:22，代码来源:drv_lcd.c

示例19: clear_screen

/**
 * Actually zeroes the VIDEO RAM.. normally
 */
void clear_screen(void)
{
	
	pos_curseur = 0;
	//memset((void*)0xD0000000, 0, (size_t)800*480*2);
	HAL_DMA2D_DeInit(&Dma2dHandle);

	Dma2dHandle.Init.Mode = DMA2D_R2M;
	Dma2dHandle.Init.ColorMode = DMA2D_RGB565;
	Dma2dHandle.Init.OutputOffset = 0x0;
	Dma2dHandle.LayerCfg[0].AlphaMode = DMA2D_NO_MODIF_ALPHA;
	Dma2dHandle.LayerCfg[0].InputAlpha = 0xFF;
	Dma2dHandle.LayerCfg[0].InputColorMode = CM_RGB565;
	Dma2dHandle.LayerCfg[0].InputOffset = 0x0;
	Dma2dHandle.Instance = DMA2D; 

	HAL_DMA2D_Init(&Dma2dHandle);
	HAL_DMA2D_ConfigLayer(&Dma2dHandle, 0);
	HAL_DMA2D_Start(&Dma2dHandle, BLACK, (uint32_t)LCD_BUFFER_START, LCD_WIDTH, LCD_HEIGHT);
	HAL_DMA2D_PollForTransfer(&Dma2dHandle, 200);
}

开发者ID:elkhadiy，项目名称:stm32lcdtest，代码行数:24，代码来源:console.c

示例20: LL_FillBuffer

/**
  * @brief  Fills a buffer.
  * @param  LayerIndex: Layer index
  * @param  pDst: Pointer to destination buffer
  * @param  xSize: Buffer width
  * @param  ySize: Buffer height
  * @param  OffLine: Offset
  * @param  ColorIndex: Color index
  * @retval None
  */
static void LL_FillBuffer(uint32_t LayerIndex, void *pDst, uint32_t xSize, uint32_t ySize, uint32_t OffLine, uint32_t ColorIndex)
{
  /* Register to memory mode with ARGB8888 as color Mode */
  hdma2d_eval.Init.Mode         = DMA2D_R2M;
  hdma2d_eval.Init.ColorMode    = DMA2D_ARGB8888;
  hdma2d_eval.Init.OutputOffset = OffLine;

  hdma2d_eval.Instance = DMA2D;

  /* DMA2D Initialization */
  if(HAL_DMA2D_Init(&hdma2d_eval) == HAL_OK)
  {
    if(HAL_DMA2D_ConfigLayer(&hdma2d_eval, LayerIndex) == HAL_OK)
    {
      if (HAL_DMA2D_Start(&hdma2d_eval, ColorIndex, (uint32_t)pDst, xSize, ySize) == HAL_OK)
      {
        /* Polling For DMA transfer */
        HAL_DMA2D_PollForTransfer(&hdma2d_eval, 10);
      }
    }
  }
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:32，代码来源:stm324x9i_eval_lcd.c

注：本文中的HAL_DMA2D_ConfigLayer函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HAL_DMA_Abort函数代码示例发布时间：2022-05-30

C++ HAL_DISABLE_INTERRUPTS函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19210|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9994|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8330|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8699|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8642|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9662|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8627|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8003|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8659|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ HAL_DMA2D_ConfigLayer函数代码示例

示例1: DMA2D_Config

示例2: DMA2D_Config

示例3: ConvertCameraLineRgb565ToLcdLineARGB8888

示例4: ConvertCameraLineRgb565ToLcdColumnARGB8888

示例5: LCD_LL_ConvertLineToARGB8888

示例6: LCD_LL_ConvertLineToARGB8888

示例7: DMA2D_Config

示例8: DMA2D_Config

示例9: LL_FillBuffer

示例10: LL_ConvertLineToARGB8888

示例11: CopyPicture

示例12: DMA2D_Config

示例13: Prepare_Picture

示例14: MX_DMA2D_Init

示例15: PicturePrepare

示例16: CopyBlendedBufferToLcdFrameBuffer

示例17: DMA2D_Config

示例18: MX_DMA2D_Init

示例19: clear_screen

示例20: LL_FillBuffer

请发表评论

全部评论

上一篇：

下一篇：

skyhacker2/SnakeGameLua: 使用cocos2d-x l

thelamehacker/macOS-toolkit: A collectio

jamesorr/CO2SYS-MATLAB: CO2SYS software

Fruzenshtein/MobileApp: Test Spring appl

避免微信小程序中的图片缓存 - 比你打又点

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053